sys-devel/distcc: Drop old

Signed-off-by: Michał Górny <mgorny@gentoo.org>

4 files changed, 0 insertions, 593 deletions

diff --git a/sys-devel/distcc/Manifest b/sys-devel/distcc/Manifest
index 5a734a064a08..8473395bb70d 100644
--- a/sys-devel/distcc/Manifest
+++ b/sys-devel/distcc/Manifest
@@ -1,3 +1,2 @@
 DIST distcc-3.2rc1.tar.bz2 609904 BLAKE2B e6b928f3b9231524d37bdf86b39cd6a3601b6cdb1e03d913ae562286794240b4dd364d5d01da2176f9bb440809b166b4b877443459751adf8bd3ecf92ceb8476 SHA512 98b2e8423d724bbb6a615d946d170441a8e293310785f867d7a277b318c043a37b0af39ae8ed1f7a0667803de9db1d1925199bad85130cf9bd9cb347635125ee
 DIST distcc-3.3.2.tar.gz 1008938 BLAKE2B e784002dffefd395b068d237a86203563fefc81e17a08c4d2e372eaaf62c5ac799011fc8633c8bfb717f0ebc8c8cb8b999c941e0f5f87c4077d031a9e5c4b138 SHA512 fdf11ed94ba50977b45e302179c5c4ba067cc3db37579cb8ed6d5b9487f8e3c89114f65af69333c38d374cf7634d7aef8d5a2d5c7fd8e9b1f4930c0897d6da10
-DIST distcc-3.3.tar.gz 1171281 BLAKE2B f637cacbfdaaca6efb56e912de55fcfa49e3fffcb8f34649e339f16376250e18a20d30281a46f207992c0b300c726427a3ad5a77bd8976d2993f8f49b9b6b970 SHA512 459c175c8ac905bc70299e77ac11b6d24782bd69c9152126249c9af8fbb4c269e6f7317b02abf50cf6cc0405dd0f887e803320e19dc528a19c4c488640c615dc
diff --git a/sys-devel/distcc/distcc-3.2_rc1-r5.ebuild b/sys-devel/distcc/distcc-3.2_rc1-r5.ebuild
deleted file mode 100644
index b4598fc9c5b8..000000000000
--- a/sys-devel/distcc/distcc-3.2_rc1-r5.ebuild
+++ /dev/null
@@ -1,196 +0,0 @@
-# Copyright 1999-2019 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-
-PYTHON_COMPAT=( python2_7 )
-
-inherit autotools flag-o-matic python-single-r1 systemd toolchain-funcs user xdg-utils
-
-MY_P="${P/_}"
-DESCRIPTION="Distribute compilation of C code across several machines on a network"
-HOMEPAGE="http://distcc.org/"
-SRC_URI="https://distcc.googlecode.com/files/${MY_P}.tar.bz2"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86"
-IUSE="gnome gssapi gtk hardened ipv6 selinux xinetd zeroconf"
-
-RESTRICT="test"
-
-CDEPEND="${PYTHON_DEPS}
-	dev-libs/popt
-	gnome? (
-		>=gnome-base/libgnome-2
-		>=gnome-base/libgnomeui-2
-		x11-libs/gtk+:2
-		x11-libs/pango
-	)
-	gssapi? ( net-libs/libgssglue )
-	gtk? ( x11-libs/gtk+:2 )
-	zeroconf? ( >=net-dns/avahi-0.6[dbus] )
-"
-DEPEND="${CDEPEND}
-	virtual/pkgconfig"
-RDEPEND="${CDEPEND}
-	!net-misc/pump
-	dev-util/shadowman
-	>=sys-devel/gcc-config-1.4.1
-	selinux? ( sec-policy/selinux-distcc )
-	xinetd? ( sys-apps/xinetd )"
-
-REQUIRED_USE="${PYTHON_REQUIRED_USE}"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
-	enewuser distcc 240 -1 -1 daemon
-	python-single-r1_pkg_setup
-
-	DCCC_PATH="/usr/$(get_libdir)/distcc/bin"
-	DISTCC_VERBOSE="0"
-}
-
-src_prepare() {
-	eapply "${FILESDIR}/${PN}-3.0-xinetd.patch"
-	# bug #253786
-	eapply "${FILESDIR}/${PN}-3.0-fix-fortify.patch"
-	# bug #255188
-	eapply "${FILESDIR}/${PN}-3.2_rc1-freedesktop.patch"
-	# bug #258364
-	eapply "${FILESDIR}/${PN}-3.2_rc1-python.patch"
-	# for net-libs/libgssglue
-	eapply "${FILESDIR}/${PN}-3.2_rc1-gssapi.patch"
-	# SOCKSv5 support needed for Portage, bug #537616
-	eapply "${FILESDIR}/${PN}-3.2_rc1-socks5.patch"
-	eapply_user
-
-	# Bugs #120001, #167844 and probably more. See patch for description.
-	use hardened && eapply "${FILESDIR}/distcc-hardened.patch"
-
-	sed -i \
-		-e "/PATH/s:\$distcc_location:${EPREFIX}${DCCC_PATH}:" \
-		-e "s:@PYTHON@:${EPYTHON}:" \
-		pump.in || die "sed failed"
-
-	sed \
-		-e "s:@EPREFIX@:${EPREFIX:-/}:" \
-		-e "s:@libdir@:/usr/$(get_libdir):" \
-		"${FILESDIR}/3.2/distcc-config" > "${T}/distcc-config" || die
-
-	eaclocal -Im4 --output=aclocal.m4
-	eautoconf
-}
-
-src_configure() {
-	local myconf="--disable-Werror --with-docdir=\$(datadir)/doc/${PF}"
-
-	# --disable-rfc2553 b0rked, bug #254176
-	use ipv6 && myconf="${myconf} --enable-rfc2553"
-
-	econf \
-		$(use_with gtk) \
-		$(use_with gnome) \
-		$(use_with gssapi auth) \
-		$(use_with zeroconf avahi) \
-		${myconf}
-}
-
-src_install() {
-	default
-	python_optimize
-
-	newinitd "${FILESDIR}/3.2/init" distccd
-	systemd_dounit "${FILESDIR}/distccd.service"
-	systemd_install_serviced "${FILESDIR}/distccd.service.conf"
-
-	cp "${FILESDIR}/3.2/conf" "${T}/distccd" || die
-	if use zeroconf; then
-		cat >> "${T}/distccd" <<-EOF || die
-
-		# Enable zeroconf support in distccd
-		DISTCCD_OPTS="\${DISTCCD_OPTS} --zeroconf"
-		EOF
-
-		sed -i '/ExecStart/ s|$| --zeroconf|' "${D}$(systemd_get_systemunitdir)"/distccd.service || die
-	fi
-	doconfd "${T}/distccd" || die
-
-	cat > "${T}/02distcc" <<-EOF || die
-	# This file is managed by distcc-config; use it to change these settings.
-	# DISTCC_LOG and DISTCC_DIR should not be set.
-	DISTCC_VERBOSE="${DISTCC_VERBOSE:-0}"
-	DISTCC_FALLBACK="${DISTCC_FALLBACK:-1}"
-	DISTCC_SAVE_TEMPS="${DISTCC_SAVE_TEMPS:-0}"
-	DISTCC_TCP_CORK="${DISTCC_TCP_CORK}"
-	DISTCC_SSH="${DISTCC_SSH}"
-	UNCACHED_ERR_FD="${UNCACHED_ERR_FD}"
-	DISTCC_ENABLE_DISCREPANCY_EMAIL="${DISTCC_ENABLE_DISCREPANCY_EMAIL}"
-	DCC_EMAILLOG_WHOM_TO_BLAME="${DCC_EMAILLOG_WHOM_TO_BLAME}"
-	EOF
-	doenvd "${T}/02distcc" || die
-
-	keepdir "${DCCC_PATH}" || die
-
-	dobin "${T}/distcc-config" || die
-
-	if use gnome || use gtk; then
-		einfo "Renaming /usr/bin/distccmon-gnome to /usr/bin/distccmon-gui"
-		einfo "This is to have a little sensability in naming schemes between distccmon programs"
-		mv "${ED}/usr/bin/distccmon-gnome" "${ED}/usr/bin/distccmon-gui" || die
-		dosym distccmon-gui /usr/bin/distccmon-gnome || die
-	fi
-
-	if use xinetd; then
-		insinto /etc/xinetd.d || die
-		newins "doc/example/xinetd" distcc || die
-	fi
-
-	insinto /usr/share/shadowman/tools
-	newins - distcc <<<"${EPREFIX}${DCCC_PATH}"
-
-	rm -r "${ED}/etc/default" || die
-	rm "${ED}/etc/distcc/clients.allow" || die
-	rm "${ED}/etc/distcc/commands.allow.sh" || die
-}
-
-pkg_postinst() {
-	if [[ ${ROOT} == / ]]; then
-		eselect compiler-shadow update distcc
-	fi
-
-	use gnome && xdg_desktop_database_update
-
-	elog
-	elog "Tips on using distcc with Gentoo can be found at"
-	elog "https://wiki.gentoo.org/wiki/Distcc"
-	elog
-	elog "distcc-pump is known to cause breakage with multiple packages."
-	elog "Do NOT enable it globally."
-	elog
-	elog "To use the distccmon programs with Gentoo you should use this command:"
-	elog "# DISTCC_DIR=\"${DISTCC_DIR:-${BUILD_PREFIX}/.distcc}\" distccmon-text 5"
-
-	if use gnome || use gtk; then
-		elog "Or:"
-		elog "# DISTCC_DIR=\"${DISTCC_DIR:-${BUILD_PREFIX}/.distcc}\" distccmon-gnome"
-	fi
-
-	elog
-	elog "***SECURITY NOTICE***"
-	elog "If you are upgrading distcc please make sure to run etc-update to"
-	elog "update your /etc/conf.d/distccd and /etc/init.d/distccd files with"
-	elog "added security precautions (the --listen and --allow directives)"
-	elog
-}
-
-pkg_prerm() {
-	if [[ -z ${REPLACED_BY_VERSION} && ${ROOT} == / ]]; then
-		eselect compiler-shadow remove distcc
-	fi
-}
-
-pkg_postrm() {
-	use gnome && xdg_desktop_database_update
-}
diff --git a/sys-devel/distcc/distcc-3.3.2-r4.ebuild b/sys-devel/distcc/distcc-3.3.2-r4.ebuild
deleted file mode 100644
index 9c94466284f4..000000000000
--- a/sys-devel/distcc/distcc-3.3.2-r4.ebuild
+++ /dev/null
@@ -1,200 +0,0 @@
-# Copyright 1999-2019 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-
-PYTHON_COMPAT=( python3_{5,6} )
-
-inherit autotools flag-o-matic python-single-r1 systemd \
-	toolchain-funcs user xdg-utils prefix
-
-DESCRIPTION="Distribute compilation of C code across several machines on a network"
-HOMEPAGE="http://distcc.org/"
-SRC_URI="https://github.com/${PN}/${PN}/releases/download/v${PV}/${P}.tar.gz"
-
-LICENSE="GPL-2+"
-SLOT="0"
-KEYWORDS="~alpha amd64 arm ~arm64 hppa ia64 ~m68k ~mips ppc ppc64 s390 ~sh ~sparc ~x86"
-IUSE="gnome gssapi gtk hardened ipv6 selinux xinetd zeroconf"
-
-RESTRICT="test"
-
-CDEPEND="${PYTHON_DEPS}
-	dev-libs/popt
-	gnome? (
-		>=gnome-base/libgnome-2
-		>=gnome-base/libgnomeui-2
-		x11-libs/gtk+:2
-		x11-libs/pango
-	)
-	gssapi? ( net-libs/libgssglue )
-	gtk? ( x11-libs/gtk+:2 )
-	zeroconf? ( >=net-dns/avahi-0.6[dbus] )
-"
-DEPEND="${CDEPEND}
-	sys-devel/autoconf-archive
-	sys-libs/binutils-libs
-	virtual/pkgconfig"
-RDEPEND="${CDEPEND}
-	!net-misc/pump
-	dev-util/shadowman
-	>=sys-devel/gcc-config-1.4.1
-	selinux? ( sec-policy/selinux-distcc )
-	xinetd? ( sys-apps/xinetd )"
-
-REQUIRED_USE="${PYTHON_REQUIRED_USE}"
-
-S="${WORKDIR}/distcc"
-
-pkg_setup() {
-	enewuser distcc 240 -1 -1 daemon
-	python-single-r1_pkg_setup
-}
-
-src_prepare() {
-	eapply "${FILESDIR}/${PN}-3.0-xinetd.patch"
-	# bug #255188
-	eapply "${FILESDIR}/${PN}-3.3.2-freedesktop.patch"
-	# SOCKSv5 support needed for Portage, bug #537616
-	eapply "${FILESDIR}/${PN}-3.2_rc1-socks5.patch"
-	# crash on missing directory
-	eapply "${FILESDIR}"/distcc-3.3.2-noexist-crash.patch
-	eapply_user
-
-	# Bugs #120001, #167844 and probably more. See patch for description.
-	use hardened && eapply "${FILESDIR}/distcc-hardened.patch"
-
-	sed -i \
-		-e "/PATH/s:\$distcc_location:${EPREFIX}/usr/lib/distcc/bin:" \
-		-e "s:@PYTHON@:${EPYTHON}:" \
-		pump.in || die "sed failed"
-
-	sed \
-		-e "s:@EPREFIX@:${EPREFIX:-/}:" \
-		-e "s:@libdir@:/usr/lib:" \
-		"${FILESDIR}/distcc-config" > "${T}/distcc-config" || die
-
-	hprefixify update-distcc-symlinks.py src/{serve,daemon}.c
-	python_fix_shebang update-distcc-symlinks.py "${T}/distcc-config"
-	eautoreconf
-}
-
-src_configure() {
-	local myconf=(
-		--disable-Werror
-		--libdir=/usr/lib
-		$(use_enable ipv6 rfc2553)
-		$(use_with gtk)
-		$(use_with gnome)
-		$(use_with gssapi auth)
-		$(use_with zeroconf avahi)
-	)
-
-	econf "${myconf[@]}"
-}
-
-src_install() {
-	# override GZIP_BIN to stop it from compressing manpages
-	emake DESTDIR="${D}" GZIP_BIN=false install
-	python_optimize
-
-	newinitd "${FILESDIR}/distccd.initd" distccd
-	systemd_dounit "${FILESDIR}/distccd.service"
-	systemd_install_serviced "${FILESDIR}/distccd.service.conf"
-
-	cp "${FILESDIR}/distccd.confd" "${T}/distccd" || die
-	if use zeroconf; then
-		cat >> "${T}/distccd" <<-EOF || die
-
-		# Enable zeroconf support in distccd
-		DISTCCD_OPTS="\${DISTCCD_OPTS} --zeroconf"
-		EOF
-
-		sed -i '/ExecStart/ s|$| --zeroconf|' "${D}$(systemd_get_systemunitdir)"/distccd.service || die
-	fi
-	doconfd "${T}/distccd"
-
-	newenvd - 02distcc <<-EOF || die
-	# This file is managed by distcc-config; use it to change these settings.
-	# DISTCC_LOG and DISTCC_DIR should not be set.
-	DISTCC_VERBOSE="${DISTCC_VERBOSE:-0}"
-	DISTCC_FALLBACK="${DISTCC_FALLBACK:-1}"
-	DISTCC_SAVE_TEMPS="${DISTCC_SAVE_TEMPS:-0}"
-	DISTCC_TCP_CORK="${DISTCC_TCP_CORK}"
-	DISTCC_SSH="${DISTCC_SSH}"
-	UNCACHED_ERR_FD="${UNCACHED_ERR_FD}"
-	DISTCC_ENABLE_DISCREPANCY_EMAIL="${DISTCC_ENABLE_DISCREPANCY_EMAIL}"
-	DCC_EMAILLOG_WHOM_TO_BLAME="${DCC_EMAILLOG_WHOM_TO_BLAME}"
-	EOF
-
-	keepdir /usr/lib/distcc
-
-	dobin "${T}/distcc-config"
-
-	if use gnome || use gtk; then
-		einfo "Renaming /usr/bin/distccmon-gnome to /usr/bin/distccmon-gui"
-		einfo "This is to have a little sensability in naming schemes between distccmon programs"
-		mv "${ED}/usr/bin/distccmon-gnome" "${ED}/usr/bin/distccmon-gui" || die
-		dosym distccmon-gui /usr/bin/distccmon-gnome
-	fi
-
-	if use xinetd; then
-		insinto /etc/xinetd.d
-		newins "doc/example/xinetd" distcc
-	fi
-
-	insinto /usr/share/shadowman/tools
-	newins - distcc <<<"${EPREFIX}/usr/lib/distcc/bin"
-	newins - distccd <<<"${EPREFIX}/usr/lib/distcc"
-
-	rm -r "${ED}/etc/default" || die
-	rm "${ED}/etc/distcc/clients.allow" || die
-	rm "${ED}/etc/distcc/commands.allow.sh" || die
-}
-
-pkg_postinst() {
-	# remove the old paths when switching from libXX to lib
-	if [[ $(get_libdir) != lib && ${SYMLINK_LIB} != yes && \
-			-d ${EROOT%/}/usr/$(get_libdir)/distcc ]]; then
-		rm -r -f "${EROOT%/}/usr/$(get_libdir)/distcc" || die
-	fi
-
-	if [[ ${ROOT} == / ]]; then
-		eselect compiler-shadow update distcc
-		eselect compiler-shadow update distccd
-	fi
-
-	use gnome && xdg_desktop_database_update
-
-	elog
-	elog "Tips on using distcc with Gentoo can be found at"
-	elog "https://wiki.gentoo.org/wiki/Distcc"
-	elog
-	elog "distcc-pump is known to cause breakage with multiple packages."
-	elog "Do NOT enable it globally."
-	elog
-	elog "To use the distccmon programs with Gentoo you should use this command:"
-	elog "# DISTCC_DIR=\"${DISTCC_DIR:-${BUILD_PREFIX}/.distcc}\" distccmon-text 5"
-
-	if use gnome || use gtk; then
-		elog "Or:"
-		elog "# DISTCC_DIR=\"${DISTCC_DIR:-${BUILD_PREFIX}/.distcc}\" distccmon-gnome"
-	fi
-
-	elog
-	elog "***SECURITY NOTICE***"
-	elog "Since distcc-3.3, whitelist is used for what distccd could execute. The whilelist"
-	elog "has been generated by compiler-shadow distccd.  To revert to the old behavior, "
-	elog "you need to pass --make-me-a-botnet to distccd in /etc/conf.d/distccd."
-	elog "Cf. https://github.com/distcc/distcc/pull/243."
-}
-
-pkg_prerm() {
-	if [[ -z ${REPLACED_BY_VERSION} && ${ROOT} == / ]]; then
-		eselect compiler-shadow remove distcc
-	fi
-}
-
-pkg_postrm() {
-	use gnome && xdg_desktop_database_update
-}
diff --git a/sys-devel/distcc/distcc-3.3.ebuild b/sys-devel/distcc/distcc-3.3.ebuild
deleted file mode 100644
index 995a109a07be..000000000000
--- a/sys-devel/distcc/distcc-3.3.ebuild
+++ /dev/null
@@ -1,196 +0,0 @@
-# Copyright 1999-2019 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-
-PYTHON_COMPAT=( python3_{5,6} )
-
-inherit flag-o-matic python-single-r1 systemd toolchain-funcs user xdg-utils prefix
-
-MY_P="${P/_}"
-DESCRIPTION="Distribute compilation of C code across several machines on a network"
-HOMEPAGE="http://distcc.org/"
-SRC_URI="https://github.com/${PN}/${PN}/releases/download/v${PV}/${P}.tar.gz"
-
-LICENSE="GPL-2+"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86"
-IUSE="gnome gssapi gtk hardened ipv6 selinux xinetd zeroconf"
-
-RESTRICT="test"
-
-CDEPEND="${PYTHON_DEPS}
-	dev-libs/popt
-	gnome? (
-		>=gnome-base/libgnome-2
-		>=gnome-base/libgnomeui-2
-		x11-libs/gtk+:2
-		x11-libs/pango
-	)
-	gssapi? ( net-libs/libgssglue )
-	gtk? ( x11-libs/gtk+:2 )
-	zeroconf? ( >=net-dns/avahi-0.6[dbus] )
-"
-DEPEND="${CDEPEND}
-	sys-libs/binutils-libs
-	virtual/pkgconfig"
-RDEPEND="${CDEPEND}
-	!net-misc/pump
-	dev-util/shadowman
-	>=sys-devel/gcc-config-1.4.1
-	selinux? ( sec-policy/selinux-distcc )
-	xinetd? ( sys-apps/xinetd )"
-
-REQUIRED_USE="${PYTHON_REQUIRED_USE}"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
-	enewuser distcc 240 -1 -1 daemon
-	python-single-r1_pkg_setup
-}
-
-src_prepare() {
-	eapply "${FILESDIR}/${PN}-3.0-xinetd.patch"
-	# bug #255188
-	eapply "${FILESDIR}/${PN}-3.2_rc1-freedesktop.patch"
-	# SOCKSv5 support needed for Portage, bug #537616
-	eapply "${FILESDIR}/${PN}-3.2_rc1-socks5.patch"
-	eapply_user
-
-	# Bugs #120001, #167844 and probably more. See patch for description.
-	use hardened && eapply "${FILESDIR}/distcc-hardened.patch"
-
-	sed -i \
-		-e "/PATH/s:\$distcc_location:${EPREFIX}/usr/lib/distcc/bin:" \
-		-e "s:@PYTHON@:${EPYTHON}:" \
-		pump.in || die "sed failed"
-
-	sed \
-		-e "s:@EPREFIX@:${EPREFIX:-/}:" \
-		-e "s:@libdir@:/usr/lib:" \
-		"${FILESDIR}/3.2/distcc-config" > "${T}/distcc-config" || die
-
-	hprefixify update-distcc-symlinks.py src/{serve,daemon}.c
-}
-
-src_configure() {
-	local myconf=(
-		--disable-Werror
-		$(use_with gtk)
-		$(use_with gnome)
-		$(use_with gssapi auth)
-		$(use_with zeroconf avahi)
-	)
-
-	# --disable-rfc2553 b0rked, bug #254176
-	use ipv6 && myconf+=(--enable-rfc2553)
-
-	econf "${myconf[@]}"
-}
-
-src_install() {
-	# override GZIP_BIN to stop it from compressing manpages
-	emake DESTDIR="${D}" GZIP_BIN=false install
-	python_optimize
-
-	newinitd "${FILESDIR}/3.2/init" distccd
-	systemd_dounit "${FILESDIR}/distccd.service"
-	systemd_install_serviced "${FILESDIR}/distccd.service.conf"
-
-	cp "${FILESDIR}/3.2/conf" "${T}/distccd" || die
-	if use zeroconf; then
-		cat >> "${T}/distccd" <<-EOF || die
-
-		# Enable zeroconf support in distccd
-		DISTCCD_OPTS="\${DISTCCD_OPTS} --zeroconf"
-		EOF
-
-		sed -i '/ExecStart/ s|$| --zeroconf|' "${D}$(systemd_get_systemunitdir)"/distccd.service || die
-	fi
-	doconfd "${T}/distccd"
-
-	newenvd - 02distcc <<-EOF || die
-	# This file is managed by distcc-config; use it to change these settings.
-	# DISTCC_LOG and DISTCC_DIR should not be set.
-	DISTCC_VERBOSE="${DISTCC_VERBOSE:-0}"
-	DISTCC_FALLBACK="${DISTCC_FALLBACK:-1}"
-	DISTCC_SAVE_TEMPS="${DISTCC_SAVE_TEMPS:-0}"
-	DISTCC_TCP_CORK="${DISTCC_TCP_CORK}"
-	DISTCC_SSH="${DISTCC_SSH}"
-	UNCACHED_ERR_FD="${UNCACHED_ERR_FD}"
-	DISTCC_ENABLE_DISCREPANCY_EMAIL="${DISTCC_ENABLE_DISCREPANCY_EMAIL}"
-	DCC_EMAILLOG_WHOM_TO_BLAME="${DCC_EMAILLOG_WHOM_TO_BLAME}"
-	EOF
-
-	keepdir /usr/lib/distcc
-
-	dobin "${T}/distcc-config"
-
-	if use gnome || use gtk; then
-		einfo "Renaming /usr/bin/distccmon-gnome to /usr/bin/distccmon-gui"
-		einfo "This is to have a little sensability in naming schemes between distccmon programs"
-		mv "${ED}/usr/bin/distccmon-gnome" "${ED}/usr/bin/distccmon-gui" || die
-		dosym distccmon-gui /usr/bin/distccmon-gnome
-	fi
-
-	if use xinetd; then
-		insinto /etc/xinetd.d
-		newins "doc/example/xinetd" distcc
-	fi
-
-	insinto /usr/share/shadowman/tools
-	newins - distcc <<<"${EPREFIX}/usr/lib/distcc/bin"
-	newins - distccd <<<"${EPREFIX}/usr/lib/distcc"
-
-	rm -r "${ED}/etc/default" || die
-	rm "${ED}/etc/distcc/clients.allow" || die
-	rm "${ED}/etc/distcc/commands.allow.sh" || die
-}
-
-pkg_postinst() {
-	# remove the old paths when switching from libXX to lib
-	if [[ $(get_libdir) != lib && ${SYMLINK_LIB} != yes && \
-			-d ${EROOT%/}/usr/$(get_libdir)/distcc ]]; then
-		rm -r -f "${EROOT%/}/usr/$(get_libdir)/distcc" || die
-	fi
-
-	if [[ ${ROOT} == / ]]; then
-		eselect compiler-shadow update distcc
-		eselect compiler-shadow update distccd
-	fi
-
-	use gnome && xdg_desktop_database_update
-
-	elog
-	elog "Tips on using distcc with Gentoo can be found at"
-	elog "https://wiki.gentoo.org/wiki/Distcc"
-	elog
-	elog "distcc-pump is known to cause breakage with multiple packages."
-	elog "Do NOT enable it globally."
-	elog
-	elog "To use the distccmon programs with Gentoo you should use this command:"
-	elog "# DISTCC_DIR=\"${DISTCC_DIR:-${BUILD_PREFIX}/.distcc}\" distccmon-text 5"
-
-	if use gnome || use gtk; then
-		elog "Or:"
-		elog "# DISTCC_DIR=\"${DISTCC_DIR:-${BUILD_PREFIX}/.distcc}\" distccmon-gnome"
-	fi
-
-	elog
-	elog "***SECURITY NOTICE***"
-	elog "Since distcc-3.3, whitelist is used for what distccd could execute. The whilelist"
-	elog "has been generated by compiler-shadow distccd.  To revert to the old behavior, "
-	elog "you need to pass --make-me-a-botnet to distccd in /etc/conf.d/distccd."
-	elog "Cf. https://github.com/distcc/distcc/pull/243."
-}
-
-pkg_prerm() {
-	if [[ -z ${REPLACED_BY_VERSION} && ${ROOT} == / ]]; then
-		eselect compiler-shadow remove distcc
-	fi
-}
-
-pkg_postrm() {
-	use gnome && xdg_desktop_database_update
-}