net-im/bitlbee: remove old

3 files changed, 0 insertions, 219 deletions

diff --git a/net-im/bitlbee/bitlbee-3.4.2.ebuild b/net-im/bitlbee/bitlbee-3.4.2.ebuild
deleted file mode 100644
index 8a75327d32b0..000000000000
--- a/net-im/bitlbee/bitlbee-3.4.2.ebuild
+++ /dev/null
@@ -1,189 +0,0 @@
-# Copyright 1999-2016 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI=5
-PYTHON_COMPAT=( python2_7 )
-
-inherit eutils multilib user python-single-r1 systemd
-
-if [[ ${PV} == "9999" ]]; then
-	EGIT_REPO_URI="https://github.com/bitlbee/bitlbee.git"
-	inherit git-r3
-else
-	SRC_URI="http://get.bitlbee.org/src/${P}.tar.gz"
-	KEYWORDS="~amd64 ~ppc ~ppc64 ~x86 ~x86-fbsd"
-fi
-
-DESCRIPTION="irc to IM gateway that support multiple IM protocols"
-HOMEPAGE="http://www.bitlbee.org/"
-
-LICENSE="GPL-2"
-SLOT="0"
-IUSE="debug gnutls ipv6 +xmpp libevent msn nss +oscar otr +plugins purple selinux
-	skype ssl test twitter +yahoo xinetd libressl"
-
-COMMON_DEPEND="
-	>=dev-libs/glib-2.16
-	purple? ( net-im/pidgin )
-	libevent? ( dev-libs/libevent:= )
-	otr? ( >=net-libs/libotr-4 )
-	gnutls? ( net-libs/gnutls:= )
-	!gnutls? (
-		nss? ( dev-libs/nss )
-		!nss? ( ssl? ( !libressl? ( dev-libs/openssl:0= ) libressl? ( dev-libs/libressl:= ) ) )
-	)
-	"
-DEPEND="${COMMON_DEPEND}
-	dev-lang/python
-	virtual/pkgconfig
-	selinux? ( sec-policy/selinux-bitlbee )
-	test? ( dev-libs/check )"
-
-RDEPEND="${COMMON_DEPEND}
-	virtual/logger
-	skype? (
-		dev-python/skype4py[${PYTHON_USEDEP}]
-		net-im/skype
-	)
-	xinetd? ( sys-apps/xinetd )"
-
-REQUIRED_USE="|| ( purple xmpp msn oscar yahoo )
-	msn? ( || ( gnutls nss ssl ) )
-	xmpp? ( !nss )"
-
-pkg_setup() {
-	if use xmpp && ! use gnutls && ! use ssl ; then
-		einfo
-		elog "You have enabled support for Jabber but do not have SSL"
-		elog "support enabled.  This *will* prevent bitlbee from being"
-		elog "able to connect to SSL enabled Jabber servers.  If you need to"
-		elog "connect to Jabber over SSL, enable ONE of the following use"
-		elog "flags: gnutls or ssl"
-		einfo
-	fi
-
-	use skype && python-single-r1_pkg_setup
-
-	enewgroup bitlbee
-	enewuser bitlbee -1 -1 /var/lib/bitlbee bitlbee
-}
-
-src_prepare() {
-	sed -i \
-		-e "s@/usr/local/sbin/bitlbee@/usr/sbin/bitlbee@" \
-		-e "s/nobody/bitlbee/" \
-		-e "s/}/	disable         = yes\n}/" \
-		doc/bitlbee.xinetd || die "sed failed in xinetd"
-
-	sed -i \
-		-e "s@mozilla-nss@nss@g" \
-		configure || die "sed failed in configure"
-
-	use skype && python_fix_shebang protocols/skype/skyped.py
-
-	[[ ${PV} != "9999" ]] && epatch "${FILESDIR}"/${PN}-3.2.1-configure.patch
-	epatch_user
-}
-
-src_configure() {
-	# setup plugins, protocol, ipv6 and debug
-	use xmpp && myconf="${myconf} --jabber=1"
-	for flag in debug ipv6 msn oscar plugins purple skype twitter yahoo ; do
-		if use ${flag} ; then
-			myconf="${myconf} --${flag}=1"
-		else
-			myconf="${myconf} --${flag}=0"
-		fi
-	done
-
-	# set otr
-	if use otr && use plugins ; then
-		myconf="${myconf} --otr=plugin"
-	else
-		if use otr ; then
-			ewarn "OTR support has been disabled automatically because it"
-			ewarn "requires the plugins USE flag."
-		fi
-		myconf="${myconf} --otr=0"
-	fi
-
-	# setup ssl use flags
-	if use gnutls ; then
-		myconf="${myconf} --ssl=gnutls"
-		einfo "Using gnutls for SSL support"
-	elif use ssl ; then
-		myconf="${myconf} --ssl=openssl"
-		einfo "Using openssl for SSL support"
-	elif use nss ; then
-		myconf="${myconf} --ssl=nss"
-		einfo "Using nss for SSL support"
-	else
-		myconf="${myconf} --ssl=bogus"
-		einfo "You will not have any encryption support enabled."
-	fi
-
-	# set event handler
-	if use libevent ; then
-		myconf="${myconf} --events=libevent"
-	else
-		myconf="${myconf} --events=glib"
-	fi
-
-	# NOTE: bitlbee's configure script is not an autotool creation,
-	# so that is why we don't use econf.
-	./configure \
-		--prefix="${EPREFIX}/usr" \
-		--datadir="${EPREFIX}/usr/share/bitlbee" \
-		--etcdir="${EPREFIX}/etc/bitlbee" \
-		--plugindir="${EPREFIX}/usr/$(get_libdir)/bitlbee" \
-		--systemdsystemunitdir=$(systemd_get_unitdir) \
-		--doc=1 --strip=0 ${myconf} || die "econf failed"
-
-	sed -i \
-		-e "/^EFLAGS/s:=:&${LDFLAGS} :" \
-		Makefile.settings || die "sed failed"
-}
-
-src_install() {
-	emake install install-etc install-doc install-dev install-systemd DESTDIR="${D}"
-
-	keepdir /var/lib/bitlbee
-	fperms 700 /var/lib/bitlbee
-	fowners bitlbee:bitlbee /var/lib/bitlbee
-
-	dodoc doc/{AUTHORS,CHANGES,CREDITS,FAQ,README}
-
-	if use skype ; then
-		newdoc protocols/skype/NEWS NEWS-skype
-		newdoc protocols/skype/README README-skype
-	fi
-
-	if use xinetd ; then
-		insinto /etc/xinetd.d
-		newins doc/bitlbee.xinetd bitlbee
-	fi
-
-	newinitd "${FILESDIR}"/bitlbee.initd-r1 bitlbee
-	newconfd "${FILESDIR}"/bitlbee.confd-r1 bitlbee
-
-	exeinto /usr/share/bitlbee
-	doexe utils/{convert_purple.py,bitlbee-ctl.pl}
-}
-
-pkg_postinst() {
-	chown -R bitlbee:bitlbee "${ROOT}"/var/lib/bitlbee
-	[[ -d "${ROOT}"/var/run/bitlbee ]] &&
-		chown -R bitlbee:bitlbee "${ROOT}"/var/run/bitlbee
-
-	if [[ -z ${REPLACING_VERSIONS} ]]; then
-		einfo
-		elog "The bitlbee init script will now attempt to stop all processes owned by the"
-		elog "bitlbee user, including per-client forks."
-		elog
-		elog "Tell the init script not to touch anything besides the main bitlbee process"
-		elog "by changing the BITLBEE_STOP_ALL variable in"
-		elog "	/etc/conf.d/bitlbee"
-		einfo
-	fi
-}
diff --git a/net-im/bitlbee/files/bitlbee.confd b/net-im/bitlbee/files/bitlbee.confd
deleted file mode 100644
index c4003ce43515..000000000000
--- a/net-im/bitlbee/files/bitlbee.confd
+++ /dev/null
@@ -1,2 +0,0 @@
-#Bitlbee options (see /usr/sbin/bitlbee -h)
-BITLBEE_OPTS="-F"
diff --git a/net-im/bitlbee/files/bitlbee.initd b/net-im/bitlbee/files/bitlbee.initd
deleted file mode 100644
index c1310bec1bfc..000000000000
--- a/net-im/bitlbee/files/bitlbee.initd
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2013 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License, v2 or
-# later
-# $Id$
-
-DAEMON=/usr/sbin/bitlbee
-PIDFILE=/var/run/bitlbee/bitlbee.pid
-
-depend() {
-	need logger net
-}
-
-start () {
-	ebegin "Starting bitlbee"
-	checkpath -d -m 0755 -o bitlbee:bitlbee `dirname ${PIDFILE}`
-	start-stop-daemon --start --quiet \
-		-u bitlbee:bitlbee  --exec ${DAEMON} -- -P ${PIDFILE} \
-		${BITLBEE_OPTS}
-	eend $?
-}
-
-stop() {
-	ebegin "Stopping bitlbee"
-	start-stop-daemon --stop --quiet --pidfile ${PIDFILE}
-	eend $?
-}
-