media-gfx/freecad: new revision 1.0.0-r3

assembly use flag and dependencies added

Signed-off-by: David Moreno <ydmorenoc@unal.edu.co>
Closes: https://github.com/gentoo/gentoo/pull/39744
Signed-off-by: Nowa Ammerlaan <nowa@gentoo.org>

3 files changed, 319 insertions, 4 deletions

diff --git a/media-gfx/freecad/freecad-1.0.0-r3.ebuild b/media-gfx/freecad/freecad-1.0.0-r3.ebuild
new file mode 100644
index 000000000000..d90bcdea5bf9
--- /dev/null
+++ b/media-gfx/freecad/freecad-1.0.0-r3.ebuild
@@ -0,0 +1,305 @@
+# Copyright 1999-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+PYTHON_COMPAT=( python3_{10..12} )
+
+inherit check-reqs cmake flag-o-matic optfeature python-single-r1 qmake-utils xdg
+
+DESCRIPTION="Qt based Computer Aided Design application"
+HOMEPAGE="https://www.freecad.org/ https://github.com/FreeCAD/FreeCAD"
+
+MY_PN=FreeCAD
+
+if [[ ${PV} == *9999* ]]; then
+	inherit git-r3
+	EGIT_REPO_URI="https://github.com/${MY_PN}/${MY_PN}.git"
+	S="${WORKDIR}/freecad-${PV}"
+else
+	SRC_URI="https://github.com/${MY_PN}/${MY_PN}/archive/refs/tags/${PV}.tar.gz -> ${P}.tar.gz"
+	KEYWORDS="~amd64"
+	S="${WORKDIR}/FreeCAD-${PV}"
+fi
+
+# code is licensed LGPL-2
+# examples are licensed CC-BY-SA (without note of specific version)
+LICENSE="LGPL-2 CC-BY-SA-4.0"
+SLOT="0"
+IUSE="debug designer +gui netgen pcl +smesh spacenav test X"
+# Modules are found in src/Mod/ and their options defined in:
+# cMake/FreeCAD_Helpers/InitializeFreeCADBuildOptions.cmake
+# To get their dependencies:
+# 'grep REQUIRES_MODS cMake/FreeCAD_Helpers/CheckInterModuleDependencies.cmake'
+IUSE+=" addonmgr assembly +bim cam cloud fem idf inspection +mesh openscad points reverse robot surface +techdraw"
+
+REQUIRED_USE="
+	${PYTHON_REQUIRED_USE}
+	bim? ( mesh )
+	cam? ( mesh )
+	gui? ( bim )
+	designer? ( gui )
+	fem? ( smesh )
+	inspection? ( points )
+	mesh? ( smesh )
+	openscad? ( mesh )
+	reverse? ( mesh points )
+	test? ( techdraw )
+"
+# Draft Workbench needs BIM
+
+RESTRICT="!test? ( test )"
+
+RDEPEND="
+	${PYTHON_DEPS}
+	dev-cpp/gtest
+	dev-cpp/yaml-cpp
+	dev-libs/boost:=
+	dev-libs/libfmt:=
+	dev-libs/xerces-c[icu]
+	dev-qt/qtbase:6[concurrent,network,xml]
+	media-libs/freetype
+	sci-libs/opencascade:=[json]
+	sys-libs/zlib
+	$(python_gen_cond_dep '
+		dev-python/numpy[${PYTHON_USEDEP}]
+		dev-python/pybind11[${PYTHON_USEDEP}]
+		dev-python/pyyaml[${PYTHON_USEDEP}]
+	')
+	assembly? ( sci-libs/ondselsolver )
+	cloud? (
+		dev-libs/openssl:=
+		net-misc/curl
+	)
+	fem? (
+		sci-libs/vtk:=
+		$(python_gen_cond_dep 'dev-python/ply[${PYTHON_USEDEP}]')
+	)
+	gui? (
+		>=media-libs/coin-4.0.0
+		dev-qt/qtbase:6[gui,opengl,widgets]
+		dev-qt/qtsvg:6
+		dev-qt/qttools:6[designer?,widgets]
+		$(python_gen_cond_dep '
+			dev-python/matplotlib[${PYTHON_USEDEP}]
+			>=dev-python/pivy-0.6.5[${PYTHON_USEDEP}]
+			dev-python/pyside6:=[uitools(-),gui,svg,${PYTHON_USEDEP}]
+			dev-python/shiboken6:=[${PYTHON_USEDEP}]
+		' )
+		virtual/glu
+		virtual/opengl
+		spacenav? ( dev-libs/libspnav[X?] )
+	)
+	netgen? ( media-gfx/netgen[opencascade] )
+	openscad? ( $(python_gen_cond_dep 'dev-python/ply[${PYTHON_USEDEP}]') )
+	pcl? ( sci-libs/pcl:= )
+	smesh? (
+		sci-libs/hdf5:=[zlib]
+		>=sci-libs/med-4.0.0-r1
+		sci-libs/vtk:=
+	)
+"
+DEPEND="${RDEPEND}
+	>=dev-cpp/eigen-3.3.1:3
+	dev-cpp/ms-gsl
+"
+BDEPEND="
+	dev-lang/swig
+	test? ( dev-cpp/gtest )
+"
+
+PATCHES=(
+	"${FILESDIR}"/${PN}-1.0.0-r1-Gentoo-specific-don-t-check-vcs.patch
+	"${FILESDIR}"/${PN}-0.21.0-0001-Gentoo-specific-disable-ccache-usage.patch
+	"${FILESDIR}"/${PN}-9999-tests-src-Qt-only-build-test-for-BUILD_GUI-ON.patch
+)
+
+DOCS=( CODE_OF_CONDUCT.md README.md )
+
+CHECKREQS_DISK_BUILD="2G"
+
+pkg_setup() {
+	check-reqs_pkg_setup
+	python-single-r1_pkg_setup
+}
+
+src_prepare() {
+	# Fix desktop file
+	sed -e 's/Exec=FreeCAD/Exec=freecad/' -i src/XDGData/org.freecad.FreeCAD.desktop || die
+
+	cmake_src_prepare
+}
+
+src_configure() {
+	# -Werror=odr, -Werror=lto-type-mismatch
+	# https://bugs.gentoo.org/875221
+	# https://github.com/FreeCAD/FreeCAD/issues/13173
+	filter-lto
+
+	# Fix building tests
+	append-ldflags -Wl,--copy-dt-needed-entries
+
+	local mycmakeargs=(
+		-DBUILD_DESIGNER_PLUGIN=$(usex designer)
+		-DBUILD_FORCE_DIRECTORY=ON				# force building in a dedicated directory
+		-DBUILD_GUI=$(usex gui)
+		-DBUILD_SMESH=$(usex smesh)
+		-DBUILD_VR=OFF
+		-DBUILD_WITH_CONDA=OFF
+
+		# Modules
+		-DBUILD_ADDONMGR=$(usex addonmgr)
+		-DBUILD_ASSEMBLY=$(usex assembly)
+		-DBUILD_BIM=$(usex bim)
+		-DBUILD_CAM=$(usex cam)
+		-DBUILD_CLOUD=$(usex cloud)
+		-DBUILD_DRAFT=ON
+		# see below for DRAWING
+		-DBUILD_FEM=$(usex fem)
+		-DBUILD_FEM_NETGEN=$(usex fem $(usex netgen))
+		-DBUILD_FLAT_MESH=$(usex mesh)			# a submodule of MeshPart
+		-DBUILD_HELP=ON
+		-DBUILD_IDF=$(usex idf)
+		-DBUILD_IMPORT=ON						# import module for various file formats
+		-DBUILD_INSPECTION=$(usex inspection)
+		-DBUILD_JTREADER=OFF					# uses an old proprietary library
+		-DBUILD_MATERIAL=ON
+		-DBUILD_MEASURE=ON
+		-DBUILD_MESH=$(usex mesh)
+		-DBUILD_MESH_PART=$(usex mesh)
+		-DBUILD_OPENSCAD=$(usex openscad)
+		-DBUILD_PART=ON
+		-DBUILD_PART_DESIGN=ON
+		-DBUILD_PLOT=ON
+		-DBUILD_POINTS=$(usex points)
+		-DBUILD_REVERSEENGINEERING=$(usex reverse)
+		-DBUILD_ROBOT=$(usex robot)
+		-DBUILD_SANDBOX=OFF
+		-DBUILD_SHOW=$(usex gui)
+		-DBUILD_SKETCHER=ON						# needed by draft workspace
+		-DBUILD_SPREADSHEET=ON
+		-DBUILD_START=ON
+		-DBUILD_SURFACE=$(usex surface)
+		-DBUILD_TECHDRAW=$(usex techdraw)
+		-DBUILD_TEST=ON							# always build test workbench for run-time testing
+		-DBUILD_TUX=$(usex gui)
+		-DBUILD_WEB=ON							# needed by start workspace
+
+		-DCMAKE_INSTALL_DATADIR=/usr/share/${PN}/data
+		-DCMAKE_INSTALL_DOCDIR=/usr/share/doc/${PF}
+		-DCMAKE_INSTALL_INCLUDEDIR=/usr/include/${PN}
+		-DCMAKE_INSTALL_PREFIX=/usr/$(get_libdir)/${PN}
+
+		-DFREECAD_BUILD_DEBIAN=OFF
+
+		-DFREECAD_USE_EXTERNAL_ONDSELSOLVER=$(usex assembly)
+		-DFREECAD_USE_EXTERNAL_SMESH=OFF		# no package in Gentoo
+		-DFREECAD_USE_EXTERNAL_ZIPIOS=OFF		# doesn't work yet, also no package in Gentoo tree
+		-DFREECAD_USE_FREETYPE=ON
+		-DFREECAD_USE_OCC_VARIANT:STRING="Official Version"
+		-DFREECAD_USE_PCL=$(usex pcl)
+		-DFREECAD_USE_PYBIND11=ON
+		-DFREECAD_USE_QT_FILEDIALOG=ON
+
+		# install python modules to site-packages' dir. True only for the main package,
+		# sub-packages will still be installed inside /usr/lib64/freecad
+		-DINSTALL_TO_SITEPACKAGES=ON
+
+		# Use the version of shiboken2 that matches the selected python version
+		-DPYTHON_CONFIG_SUFFIX="-${EPYTHON}"
+		-DPython3_EXECUTABLE=${PYTHON}
+	)
+
+	if use debug; then
+		# BUILD_SANDBOX currently broken, see
+		# https://forum.freecadweb.org/viewtopic.php?f=4&t=36071&start=30#p504595
+		mycmakeargs+=(
+			-DBUILD_SANDBOX=OFF
+			-DBUILD_TEMPLATE=ON
+		)
+	else
+		mycmakeargs+=(
+			-DBUILD_SANDBOX=OFF
+			-DBUILD_TEMPLATE=OFF
+		)
+	fi
+
+	if use gui; then
+		mycmakeargs+=(
+			-DFREECAD_QT_MAJOR_VERSION=6
+			-DFREECAD_QT_VERSION=6
+			-DQT_DEFAULT_MAJOR_VERSION=6
+			-DQt6Core_MOC_EXECUTABLE="$(qt6_get_bindir)/moc"
+			-DQt6Core_RCC_EXECUTABLE="$(qt6_get_bindir)/rcc"
+			-DBUILD_QT5=OFF
+			# Drawing module unmaintained and not ported to qt6
+			-DBUILD_DRAWING=OFF
+		)
+	fi
+
+	cmake_src_configure
+}
+
+# We use the FreeCADCmd binary instead of the FreeCAD binary here
+# for two reasons:
+# 1. It works out of the box with USE=-gui as well, not needing a guard
+# 2. We don't need virtualx.eclass and its dependencies
+# The environment variables are needed, so that FreeCAD knows
+# where to save its temporary files, and where to look and write its
+# configuration. Without those, there is a sandbox violation, when it
+# tries to create /var/lib/portage/home/.FreeCAD directory.
+src_test() {
+	cd "${BUILD_DIR}" || die
+
+	local -x FREECAD_USER_HOME="${HOME}"
+	local -x FREECAD_USER_DATA="${T}"
+	local -x FREECAD_USER_TEMP="${T}"
+	./bin/FreeCADCmd --run-test 0 --set-config AppHomePath="${BUILD_DIR}/" || die
+}
+
+src_install() {
+	cmake_src_install
+
+	dobin src/Tools/freecad-thumbnailer
+
+	if use gui; then
+		newbin - freecad <<- _EOF_
+		#!/bin/sh
+		# https://github.com/coin3d/coin/issues/451
+		: "\${QT_QPA_PLATFORM:=xcb}"
+		export QT_QPA_PLATFORM
+		exec /usr/$(get_libdir)/${PN}/bin/FreeCAD "\${@}"
+		_EOF_
+		mv "${ED}"/usr/$(get_libdir)/${PN}/share/* "${ED}"/usr/share || die "failed to move shared resources"
+	fi
+	dosym -r /usr/$(get_libdir)/${PN}/bin/FreeCADCmd /usr/bin/freecadcmd
+
+	rm -r "${ED}"/usr/$(get_libdir)/${PN}/include/E57Format || die "failed to drop unneeded include directory E57Format"
+
+	python_optimize "${ED}"/usr/share/${PN}/data/Mod/Start/StartPage "${ED}"/usr/$(get_libdir)/${PN}{/Ext,/Mod}/
+	# compile main package in python site-packages as well
+	python_optimize
+}
+
+pkg_postinst() {
+	xdg_pkg_postinst
+
+	einfo "You can load a lot of additional workbenches using the integrated"
+	einfo "AddonManager."
+
+	einfo "There are a lot of additional tools, for which FreeCAD has builtin"
+	einfo "support. Some of them are available in Gentoo. Take a look at"
+	einfo "https://wiki.freecad.org/Installing_additional_components"
+	optfeature_header "External programs used by FreeCAD"
+	optfeature "dependency graphs" media-gfx/graphviz
+	optfeature "importing and exporting 2D AutoCAD DWG files" media-gfx/libredwg
+	optfeature "importing OpenSCAD files, Mesh booleans" media-gfx/openscad
+	use bim && optfeature "working with COLLADA documents" dev-python/pycollada
+	if use fem || use mesh; then
+		optfeature "mesh generation" sci-libs/gmsh
+	fi
+}
+
+pkg_postrm() {
+	xdg_pkg_postrm
+}
diff --git a/media-gfx/freecad/freecad-9999.ebuild b/media-gfx/freecad/freecad-9999.ebuild
index 62ffcbe957a1..ed5c07ceb995 100644
--- a/media-gfx/freecad/freecad-9999.ebuild
+++ b/media-gfx/freecad/freecad-9999.ebuild
@@ -26,17 +26,18 @@ fi
 # examples are licensed CC-BY-SA (without note of specific version)
 LICENSE="LGPL-2 CC-BY-SA-4.0"
 SLOT="0"
-IUSE="debug designer +gui netgen pcl smesh spacenav test X"
+IUSE="debug designer +gui netgen pcl +smesh spacenav test X"
 # Modules are found in src/Mod/ and their options defined in:
 # cMake/FreeCAD_Helpers/InitializeFreeCADBuildOptions.cmake
 # To get their dependencies:
 # 'grep REQUIRES_MODS cMake/FreeCAD_Helpers/CheckInterModuleDependencies.cmake'
-IUSE+=" addonmgr bim cam cloud fem idf inspection mesh openscad points reverse robot surface +techdraw"
+IUSE+=" addonmgr assembly +bim cam cloud fem idf inspection +mesh openscad points reverse robot surface +techdraw"
 
 REQUIRED_USE="
 	${PYTHON_REQUIRED_USE}
 	bim? ( mesh )
 	cam? ( mesh )
+	gui? ( bim )
 	designer? ( gui )
 	fem? ( smesh )
 	inspection? ( points )
@@ -45,6 +46,7 @@ REQUIRED_USE="
 	reverse? ( mesh points )
 	test? ( techdraw )
 "
+# Draft Workbench needs BIM
 
 RESTRICT="!test? ( test )"
 
@@ -64,6 +66,7 @@ RDEPEND="
 		dev-python/pybind11[${PYTHON_USEDEP}]
 		dev-python/pyyaml[${PYTHON_USEDEP}]
 	')
+	assembly? ( sci-libs/ondselsolver )
 	cloud? (
 		dev-libs/openssl:=
 		net-misc/curl
@@ -146,12 +149,12 @@ src_configure() {
 
 		# Modules
 		-DBUILD_ADDONMGR=$(usex addonmgr)
-		-DBUILD_ASSEMBLY=OFF					# Requires OndselSolver
+		-DBUILD_ASSEMBLY=$(usex assembly)
 		-DBUILD_BIM=$(usex bim)
 		-DBUILD_CAM=$(usex cam)
 		-DBUILD_CLOUD=$(usex cloud)
 		-DBUILD_DRAFT=ON
-		-DBUILD_DRAWING=OFF						# Unmaintained and not ported to Qt 6
+		# see below for DRAWING
 		-DBUILD_FEM=$(usex fem)
 		-DBUILD_FEM_NETGEN=$(usex fem $(usex netgen))
 		-DBUILD_FLAT_MESH=$(usex mesh)			# a submodule of MeshPart
@@ -189,6 +192,7 @@ src_configure() {
 
 		-DFREECAD_BUILD_DEBIAN=OFF
 
+		-DFREECAD_USE_EXTERNAL_ONDSELSOLVER=$(usex assembly)
 		-DFREECAD_USE_EXTERNAL_SMESH=OFF		# no package in Gentoo
 		-DFREECAD_USE_EXTERNAL_ZIPIOS=OFF		# doesn't work yet, also no package in Gentoo tree
 		-DFREECAD_USE_FREETYPE=ON
@@ -228,6 +232,8 @@ src_configure() {
 			-DQt6Core_MOC_EXECUTABLE="$(qt6_get_bindir)/moc"
 			-DQt6Core_RCC_EXECUTABLE="$(qt6_get_bindir)/rcc"
 			-DBUILD_QT5=OFF
+			# Drawing module unmaintained and not ported to qt6
+			-DBUILD_DRAWING=OFF
 		)
 	fi
 
diff --git a/media-gfx/freecad/metadata.xml b/media-gfx/freecad/metadata.xml
index 35a605b4e6ef..7cc8bc2a327b 100644
--- a/media-gfx/freecad/metadata.xml
+++ b/media-gfx/freecad/metadata.xml
@@ -14,6 +14,10 @@
 			Build the addon manager module for automatic handling of 3rd 
 			party addons
 		</flag>
+		<flag name="assembly">
+			Build the assembly module to create 3D models composed of several
+			distinguishable parts as a conformed machine.
+		</flag>
 		<flag name="bim">
 			Build the BIM module and workbench
 		</flag>