Nagios in full.

3 files changed, 127 insertions, 0 deletions

diff --git a/net-analyzer/nagios-nrpe/files/digest-nagios-nrpe-1.5 b/net-analyzer/nagios-nrpe/files/digest-nagios-nrpe-1.5
new file mode 100644
index 000000000000..9d8d88bbf3f4
--- /dev/null
+++ b/net-analyzer/nagios-nrpe/files/digest-nagios-nrpe-1.5
@@ -0,0 +1 @@
+MD5 6f9f696e24fe380839e01fc57e29206b nrpe-1.5.tar.gz 38232
diff --git a/net-analyzer/nagios-nrpe/files/nrpe b/net-analyzer/nagios-nrpe/files/nrpe
new file mode 100644
index 000000000000..3989bca7a26f
--- /dev/null
+++ b/net-analyzer/nagios-nrpe/files/nrpe
@@ -0,0 +1,27 @@
+#!/sbin/runscript
+
+depend() {
+	need net
+}
+
+start() {
+	ebegin "Starting nrpe"
+	start-stop-daemon --start --quiet --name nrpe \
+	--startas /usr/nagios/bin/nrpe \
+		-c nagios:nagios \
+		-- -d /etc/nagios/nrpe.cfg
+	eend $? "Failed to Start nrpe"
+}
+
+stop() {
+	ebegin "Stopping nrpe"
+	start-stop-daemon --stop --quiet -n nrpe
+	eend $? "Failed to Stop nrpe"
+}
+
+restart() {
+	ebegin "Restarting nrpe"
+	svc_stop
+	svc_start
+	eend $? "Failed to Restart nrpe"
+}
diff --git a/net-analyzer/nagios-nrpe/files/nrpe.cfg b/net-analyzer/nagios-nrpe/files/nrpe.cfg
new file mode 100644
index 000000000000..3132ea336507
--- /dev/null
+++ b/net-analyzer/nagios-nrpe/files/nrpe.cfg
@@ -0,0 +1,99 @@
+#############################################################################
+# Sample NRPE Config File 
+# Written by: Ethan Galstad (nagios@nagios.org)
+# 
+# Last Modified: 06-03-2002
+#
+# NOTES:
+# This is a sample configuration file for the NRPE daemon.  It needs to be
+# located on the remote host that is running the NRPE daemon, not the host
+# from which the check_nrpe client is being executed.
+#############################################################################
+
+
+
+# PORT NUMBER
+# Port number we should wait for connections on.
+# NOTE: This must be a non-priviledged port (i.e. > 1024).
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+server_port=5666
+
+
+
+# SERVER ADDRESS
+# Address that nrpe should bind to in case there are more than one interface
+# and you do not want nrpe to bind on all interfaces.
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+#server_address=192.168.1.1
+
+
+
+# ALLOWED HOST ADDRESSES
+# This is a comma-delimited list of IP address of hosts that are allowed
+# to talk to the NRPE daemon.
+#
+# NOTE: The daemon only does rudimentary checking of the client's IP
+#       address.  I would highly recommend adding entries in your
+#	/etc/hosts.allow file to allow only the specified host to connect
+#	to the port you are running this daemon on.
+#
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+allowed_hosts=127.0.0.1
+
+
+
+# NRPE USER
+# This determines the effective user that the NRPE daemon should run as.  
+# You can either supply a username or a UID.
+# 
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+nrpe_user=nagios
+
+
+
+# NRPE GROUP
+# This determines the effective group that the NRPE daemon should run as.  
+# You can either supply a group name or a GID.
+# 
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+nrpe_group=nagios
+
+
+
+# DEBUGGING OPTION
+# This option determines whether or not debugging messages are logged to the
+# syslog facility.
+# Values: 0=debugging off, 1=debugging on
+
+debug=0
+
+
+
+# COMMAND DEFINITIONS
+# Command definitions that this daemon will run.  Definitions
+# are in the following format:
+#
+# command[<command_name>]=<command_line>
+#
+# When the daemon receives a request to return the results of <command_name>
+# it will execute the command specified by the <command_line> argument.
+#
+# Unlike Nagios, the command line cannot contain macros - it must be
+# typed exactly as it should be executed.
+#
+# Note: Any plugins that are used in the command lines must reside
+# on the machine that this daemon is running on!  The examples below
+# assume that you have plugins installed in a /usr/nagios/libexec
+# directory.
+
+command[check_users]=/usr/nagios/libexec/check_users 5 10
+command[check_load]=/usr/nagios/libexec/check_load 5 10 15 20 25 30
+command[check_disk1]=/usr/nagios/libexec/check_disk 80 95 /dev/hda1
+command[check_disk2]=/usr/nagios/libexec/check_disk 80 95 /dev/hdb1
+command[check_zombie_procs]=/usr/nagios/libexec/check_procs 5 10 Z
+command[check_total_procs]=/usr/nagios/libexec/check_procs 150 200