Removed old configs

18 files changed, 0 insertions, 1332 deletions

diff --git a/config.d/controller/modules/files/cconsolefont b/config.d/controller/modules/files/cconsolefont
deleted file mode 100644
index a815cbc..0000000
--- a/config.d/controller/modules/files/cconsolefont
+++ /dev/null
@@ -1,28 +0,0 @@
-# The consolefont service is not activated by default. If you need to
-# use it, you should run "rc-update add consolefont boot" as root.
-#
-# consolefont specifies the default font that you'd like Linux to use on the
-# console.  You can find a good selection of fonts in /usr/share/consolefonts;
-# you shouldn't specify the trailing ".psf.gz", just the font name below.
-# To use the default console font, comment out the CONSOLEFONT setting below.
-# Eurlatgr is recommended, since it includes Latin+Greek fonts. 
-# Remember:Eurlatgr is not the official consolefont which Gentoo includes on the
-# stage3 tarballs
-consolefont="eurlatgr"
-
-# consoletranslation is the charset map file to use.  Leave commented to use
-# the default one.  Have a look in /usr/share/consoletrans for a selection of
-# map files you can use.
-#consoletranslation="8859-1_to_uni"
-
-# unicodemap is the unicode map file to use. Leave commented to use the
-# default one. Have a look in /usr/share/unimaps for a selection of map files
-# you can use.
-#unicodemap="iso01"
-
-
-
-
-
-
-# EOF
\ No newline at end of file
diff --git a/config.d/controller/modules/files/ccoptions b/config.d/controller/modules/files/ccoptions
deleted file mode 100644
index 2ceb9fb..0000000
--- a/config.d/controller/modules/files/ccoptions
+++ /dev/null
@@ -1,345 +0,0 @@
-#!/bin/bash
-
-# Distcc, distcc_pump, ccache & some features
-
-CHFEATURES=''
-# CHROOT CONFIGURATION STAGE
-# COMMENT OUT TO REMOVE
-
-# Enable portage support for the distcc package. 
-#
-CHFEATURES="${CHFEATURES} distcc"
-
-# Enable portage support for the distcc package with pump mode. 
-#
-CHFEATURES="${CHFEATURES} distcc-pump"
-
-# Use Linux control group to control processes spawned by ebuilds.
-# This allows emerge to safely kill all subprocesses when ebuild phase exits.
-#
-# CHFEATURES="${CHFEATURES} cgroups"
-
-# Enable automatic execution of the command specified by the PORT_LOGDIR_CLEAN variable.
-# The default PORT_LOGDIR_CLEAN setting will remove all files from PORT_LOGDIR that were last modified at least 7 days ago.
-# 
-# CHFEATURES="${CHFEATURES} clean-logs"
-
-# The causes all build logs to be compressed while they are being written.
-# Log file names have an extension that is appropriate for the compression type.
-# Currently, only gzip(1) compression is supported, so build logs will have a '.gz' extension when this feature is enabled. 
-#
-# CHFEATURES="${CHFEATURES} clean-logs"
-
-# This causes the CONFIG_PROTECT behavior to be skipped for files that have not been modified since they were installed.
-# This feature is enabled by default. 
-#
-# CHFEATURES="${CHFEATURES} config-protect-if-modified"
-
-# Do not delete the ${T} directory after the merge process.
-#
-# CHFEATURES="${CHFEATURES} keeptemp"
-
-# Do not delete the ${WORKDIR} directory after the merge process.
-# ${WORKDIR} can then be reused since this feature disables most of the clean phase that runs prior to each build.
-# Due to lack of proper cleanup, this feature can interfere with normal emerge operation 
-# and therefore it should not be left enabled for more than a short period of time.
-#
-# CHFEATURES="${CHFEATURES} keepwork"
-
-# After a package is merged or unmerged, sync relevant files to disk in order to avoid data-loss in the event of a power failure.
-# This feature is enabled by default.
-#
-# CHFEATURES="${CHFEATURES} merge-sync"
-
-# Automatically perform a metadata transfer when `emerge --sync` is run. In versions of portage >=2.1.5, this feature is disabled by default.
-# When metadata-transfer is disabled, metadata cache from the ${repository_location}/metadata/md5-cache/ directory will be used directly (if available). 
-#
-# CHFEATURES="${CHFEATURES} metadata-transfer"
-
-# Preserve extended attributes (filesystem-stored metadata) when installing files (see attr(1)).
-# The PORTAGE_XATTR_EXCLUDE variable may be used to exclude specific attributes from being preserved. 
-#
-# CHFEATURES="${CHFEATURES} xattr"
-
-# Enable GPG verification when using emerge-webrsync. 
-#
-# CHFEATURES="${CHFEATURES} webrsync-gpg"
-
-# Drop privileges to the owner of ${repository_location} for emerge(1) --sync operations.
-# Note that this feature assumes that all subdirectories of ${repository_location} have the same ownership as ${repository_location} itself.
-# It is the user's responsibility to ensure correct ownership, since otherwise Portage would have to waste time validating ownership for each and every sync operation. 
-#
-# CHFEATURES="${CHFEATURES} usersync"
-
-# Enable the sandbox in the compile phase, when running without root privs (userpriv). 
-#
-# CHFEATURES="${CHFEATURES} usersandbox"
-
-# Allow portage to drop root privileges and compile packages as portage:portage without a sandbox (unless usersandbox is also used). 
-#
-# CHFEATURES="${CHFEATURES} userpriv"
-
-# When portage is run as root, drop privileges to portage:portage during the fetching of package sources. 
-#
-# CHFEATURES="${CHFEATURES} userfetch"
-
-# If a file is not claimed by another package in the same slot and it is not protected by CONFIG_PROTECT, 
-# unmerge it even if the modification time or checksum differs from the file that was originally installed. 
-#
-# CHFEATURES="${CHFEATURES} unmerge-orphans"
-
-# Keep logs from successful unmerge phases. This is relevant only when PORT_LOGDIR is set.
-#
-# CHFEATURES="${CHFEATURES} unmerge-logs"
-
-# Call quickpkg(1) to create a backup of each package before it is unmerged (if a binary package of the same version does not already exist). 
-# Also see the related downgrade-backup feature. 
-#
-# CHFEATURES="${CHFEATURES} unmerge-backup"
-
-# Warn if FEATURES contains one or more unknown values. 
-#
-# CHFEATURES="${CHFEATURES} unknown-features-warn"
-
-# Filter out any unknown values that the FEATURES variable contains. 
-#
-# CHFEATURES="${CHFEATURES} unknown-features-filter"
-
-# If "test" is enabled FEATURES and the test phase of an ebuild fails, continue to execute the remaining phases as if the failure had not occurred. 
-# Note that the test phase for a specific package may be disabled by masking the "test" USE flag in package.use.mask (see portage(5)). 
-#
-# CHFEATURES="${CHFEATURES} test-fail-continue"
-
-# Run package-specific tests during each merge to help make sure the package compiled properly. 
-# See test in ebuild(1) and src_test() in ebuild(5). 
-# This feature implies the "test" USE flag if it is a member of IUSE, either explicitly or implicitly (see ebuild(5) for more information about IUSE). 
-# The "test" USE flag is also automatically disabled when the "test" feature is disabled.
-#
-# CHFEATURES="${CHFEATURES} test"
-
-# Before merging packages to the live filesystem, automatically strip setuid bits from any file that is not listed in /etc/portage/suidctl.conf.
-#
-# CHFEATURES="${CHFEATURES} suidctl"
-
-# Have portage react strongly to conditions that have the potential to be dangerous (like missing or incorrect digests for ebuilds). 
-#
-# CHFEATURES="${CHFEATURES} strict"
-
-# Have portage react strongly to conditions that may conflict with system security provisions (for example textrels, executable stack). 
-# Read about the QA_STRICT_* variables in make.conf(5). 
-#
-# CHFEATURES="${CHFEATURES} stricter"
-
-# Prior to stripping ELF etdyn and etexec files, the debugging info is stored for later use by various debuggers. 
-# This feature is disabled by nostrip. You should also consider setting compressdebug so the files don't suck up a lot of space. 
-# For installation of source code, see installsources. 
-#
-# CHFEATURES="${CHFEATURES} splitdebug"
-
-# Store build logs in category subdirectories of PORT_LOGDIR/build, instead of using PORT_LOGDIR directly. 
-#
-# CHFEATURES="${CHFEATURES} split-log"
-
-# Store logs created by PORTAGE_ELOG_SYSTEM="save" in category subdirectories of PORT_LOGDIR/elog, instead of using PORT_LOGDIR/elog directly.
-#
-# CHFEATURES="${CHFEATURES} split-elog"
-
-# Skip write access checks on DISTDIR when fetching files. 
-# This is useful when FETCHCOMMAND and RESUMECOMMAND are used to forward fetch requests to a server that exposes DISTDIR as a read-only NFS share. 
-# A read-only DISTDIR is not compatible with the distlocks, so it is recommended to also add "-distlocks" to FEATURES in order to avoid warning messages 
-# that are triggered by this incompatibility. 
-#
-# CHFEATURES="${CHFEATURES} skiprocheck"
-
-# When commiting work to cvs with repoman(1), sign the Manifest with a GPG key. Read about the PORTAGE_GPG_KEY variable in make.conf(5). 
-#
-# CHFEATURES="${CHFEATURES} sign"
-
-# Stands for Smart Filesystem Permissions. Before merging packages to the live filesystem, automatically search for and set permissions on setuid and setgid files. 
-# Files that are setuid have the group and other read bits removed while files that are setgid have the other read bit removed. See also suidctl below. 
-#
-# CHFEATURES="${CHFEATURES} sfperms"
-
-# Enable SELinux sandbox-ing. Do not toggle this FEATURE yourself. 
-#
-# CHFEATURES="${CHFEATURES} sesandbox"
-
-# Enable sandbox-ing when running emerge(1) and ebuild(1). 
-#
-# CHFEATURES="${CHFEATURES} sandbox"
-
-# Output a verbose trace of python execution to stderr when a command's --debug option is enabled. 
-#
-# CHFEATURES="${CHFEATURES} python-trace"
-
-# This is identical to the collision-protect feature except that files may be overwritten if they are not explicitly listed in the contents of a currently installed package. 
-# This is particularly useful on systems that have lots of orphan files that have been left behind by older versions of portage that did not support the unmerge-orphans feature. 
-# Like collision-protect, the COLLISION_IGNORE variable can be used to selectively disable this feature. 
-# It is recommended to leave either protect-owned or collision-protect enabled at all times, since otherwise file collisions between packages may result in files being overwritten or uninstalled at inappropriate times. 
-# If collision-protect is enabled then it takes precedence over protect-owned.
-#
-# CHFEATURES="${CHFEATURES} protect-owned"
-
-# Preserve libraries when the sonames change during upgrade or downgrade. Libraries are preserved only if consumers of those libraries are detected. 
-# Preserved libraries are automatically removed when there are no remaining consumers. Run `emerge @preserved-rebuild` in order to rebuild all consumers of preserved libraries. 
-#
-# CHFEATURES="${CHFEATURES} preserve-libs"
-
-# If prelink(8) is installed then use it to undo any prelinks on files before computing checksums for merge and unmerge. 
-# This feature is useful only if prelink(8) is installed and accurate checksums (despite prelinking) are needed for some reason such as for checking the integrity of installed files or because the unmerge-orphans feature is disabled.
-#
-# Note that normal emerging of packages from source computes the checksums before things will be prelinked, so in such cases, this feature isn't required either. 
-# Undoing prelinking while merging is only required when using tools like quickpkg(1) which can cause already prelinked files to be merged. 
-#
-# CHFEATURES="${CHFEATURES} prelink-checksums"
-
-# Use finer-grained locks when installing packages, allowing for greater parallelization. For additional parallelization, disable ebuild-locks. 
-#
-# CHFEATURES="${CHFEATURES} parallel-install"
-
-# Fetch in the background while compiling. Run `tail -f /var/log/emerge-fetch.log` in a terminal to view parallel-fetch progress.
-#
-# CHFEATURES="${CHFEATURES} parallel-fetch"
-
-# Disables xterm titlebar updates (which contains status info). 
-#
-# CHFEATURES="${CHFEATURES} notitles"
-
-# Prevents the stripping of binaries that are merged to the live filesystem.
-#
-# CHFEATURES="${CHFEATURES} nostrip"
-
-# Do not install manpages. 
-#
-# CHFEATURES="${CHFEATURES} noman"
-
-# Do not install info pages. 
-#
-# CHFEATURES="${CHFEATURES} noinfo"
-
-# Do not install doc files (/usr/share/doc).
-#
-# CHFEATURES="${CHFEATURES} nodoc"
-
-# Do not delete the the source and temporary files after the merge process.
-#
-# CHFEATURES="${CHFEATURES} noclean"
-
-# When utilizing ebuild(1), only run the function requested. 
-# Also, forces the corresponding ebuild and eclasses to be sourced again for each phase, in order to account for modifications. 
-#
-# CHFEATURES="${CHFEATURES} noauto"
-
-# Enable GLEP 42 news support. See https://wiki.gentoo.org/wiki/GLEP:42. 
-#
-CHFEATURES="${CHFEATURES} -news"
-
-# Enable escaping network-sandbox through SOCKSv5 proxy. Enabling distcc feature also enables the proxy. 
-#
-# CHFEATURES="${CHFEATURES} network-sandbox-proxy"
-
-# Isolate the ebuild phase functions from host network interfaces. Supported only on Linux. Requires network namespace support in kernel. 
-#
-# CHFEATURES="${CHFEATURES} network-sandbox"
-
-# Many Makefiles assume that their libraries should go to /usr/lib, or $(prefix)/lib. 
-# This assumption can cause a serious mess if /usr/lib isn't a symlink to /usr/lib64. To find the bad packages, we have a portage feature called multilib-strict. 
-# It will prevent emerge from putting 64bit libraries into anything other than (/usr)/lib64. 
-#
-# CHFEATURES="${CHFEATURES} multilib-strict"
-
-# Fetch everything in SRC_URI regardless of USE settings, except do not fetch anything when mirror is in RESTRICT. 
-#
-# CHFEATURES="${CHFEATURES} mirror"
-
-# Automatically perform a metadata transfer when `emerge --sync` is run. In versions of portage >=2.1.5, this feature is disabled by default. 
-# When metadata-transfer is disabled, metadata cache from the ${repository_location}/metadata/md5-cache/ directory will be used directly (if available). 
-#
-# CHFEATURES="${CHFEATURES} metadata-transfer"
-
-# When mirror is enabled in FEATURES, fetch files even when mirror is also in the ebuild(5) RESTRICT variable. 
-# Do NOT use lmirror for clients that need to override RESTRICT when fetching from a local mirror, but instead use a "local" mirror setting in /etc/portage/mirrors, 
-# as described in portage(5). 
-#
-# CHFEATURES="${CHFEATURES} lmirror"
-
-# Isolate the ebuild phase functions from host IPC namespace. Supported only on Linux. Requires IPC namespace support in kerne
-#
-# CHFEATURES="${CHFEATURES} ipc-sandbox"
-
-# Install source code into /usr/src/debug/${CATEGORY}/${PF} (also see splitdebug). 
-# This feature works only if debugedit is installed and CFLAGS is set to include debug information (such as with the -ggdb flag). 
-#
-# CHFEATURES="${CHFEATURES} installsources"
-
-# Enable portage support for the icecream package.
-#
-# CHFEATURES="${CHFEATURES} icecream"
-
-# Force emerges to always try to fetch files from the PORTAGE_BINHOST. See make.conf(5) for more information. 
-#
-# CHFEATURES="${CHFEATURES} getbinpkg"
-
-# Enable prefix support for all ebuilds, regardless of EAPI, since older EAPIs would otherwise be useless with prefix configurations. 
-# This brings compatibility with the prefix branch of portage, which also supports EPREFIX for all EAPIs (for obvious reasons). 
-#
-# CHFEATURES="${CHFEATURES} force-prefix"
-
-# Only fetch files from configured mirrors, ignoring SRC_URI, except when mirror is in the ebuild(5) RESTRICT variable. 
-#
-# CHFEATURES="${CHFEATURES} force-mirror"
-
-# Modifies .la files to not include other .la files and some other fixes (order of flags, duplicated entries, ...) 
-#
-# CHFEATURES="${CHFEATURES} fixlafiles"
-
-# Enable fakeroot for the install and package phases when a non-root user runs the ebuild(1) command.
-#
-# CHFEATURES="${CHFEATURES} fakeroot"
-
-# Clean up temporary files after a build failure. This is particularly useful if you have PORTAGE_TMPDIR on tmpfs. 
-# If this feature is enabled, you probably also want to enable PORT_LOGDIR in order to save the build log. 
-# Both the ebuild(1) command and the noclean feature cause the fail-clean feature to be automatically disabled. 
-#
-# CHFEATURES="${CHFEATURES} fail-clean"
-
-# Use locks to ensure that unsandboxed ebuild phases never execute concurrently. Also see parallel-install. 
-#
-# CHFEATURES="${CHFEATURES} ebuild-locks"
-
-# When a package is downgraded to a lower version, call quickpkg(1) in order to create a backup of the installed 
-# version before it is unmerged (if a binary package of the same version does not already exist). 
-# Also see the related unmerge-backup feature. 
-#
-# CHFEATURES="${CHFEATURES} downgrade-backup"
-
-# Portage uses lockfiles to ensure competing instances don't clobber each other's files. 
-# This feature is enabled by default but may cause heartache on less intelligent remote filesystems like NFSv2 
-# and some strangely configured Samba server (oplocks off, NFS re-export). 
-# A tool /usr/lib/portage/bin/clean_locks exists to help handle lock issues when a problem arises (normally due to a crash or disconnect). 
-#
-# CHFEATURES="${CHFEATURES} distlocks"
-
-# Enable portage support for the ccache package. If the ccache dir is not present in the user's environment, then portage will default to ${PORTAGE_TMPDIR}/ccache.
-#
-CHFEATURES="${CHFEATURES} ccache"
-
-# Build binary packages for just packages in the system set. 
-#
-# CHFEATURES="${CHFEATURES} buildsyspkg"
-
-# Binary packages will be created for all packages that are merged. Also see quickpkg(1) and emerge(1) --buildpkg and --buildpkgonly options. 
-#
-# CHFEATURES="${CHFEATURES} buildpkg"
-
-# Keep logs from successful binary package merges. This is relevant only when PORT_LOGDIR is set. 
-#
-# CHFEATURES="${CHFEATURES} binpkg-logs"
-
-export CHFEATURES
-
-# SETTING A VALUE HERE, ENABLES CCACHE
-CCCACHESIZE='2G'
-
-export CCCACHESIZE
-
diff --git a/config.d/controller/modules/files/ccustom_pacl b/config.d/controller/modules/files/ccustom_pacl
deleted file mode 100644
index 4be0baf..0000000
--- a/config.d/controller/modules/files/ccustom_pacl
+++ /dev/null
@@ -1,13 +0,0 @@
-# Custom package list
-# Include here the packages you want to be emerged.
-# Note: You are building a stateless system, which implies that many rootfs areas will be read only. 
-# The more complex you make your system, the highest the chance of breaking the setup will be.
-#
-# Always include packages that require sane write permissions or configure them accordingly to support such a system
-# Also remember to update the USEFLAGS from the Portage menu entry and keep in mind that USE flags often conflict!
-# Add the full package name and category, otherwise on ebuilds with same name from different categories the process wont be able to proceed.
-# Example: foo-category/bar-portage_package
-#
-
-
-# EOF
\ No newline at end of file
diff --git a/config.d/controller/modules/files/ccustom_scripts b/config.d/controller/modules/files/ccustom_scripts
deleted file mode 100644
index 4a111fe..0000000
--- a/config.d/controller/modules/files/ccustom_scripts
+++ /dev/null
@@ -1,16 +0,0 @@
-# Custom scripts configuration file
-# Please input the path to your script ( absolute path ) to make it start and run once on bootup.
-#
-# It requires no explanation about the effects of a miss-configured script that runs on bootup.
-# So please include scripts that have been checked and must really be included.
-#
-# For now, this services provides only the features of /etc/local.d
-# In the future a new file will be added with guided interface for configuring Initscripts, which for now
-# go way beyond the scope of this project.
-#
-# Syntax: {/path/to/script}
-
-
-
-
-# EOF
\ No newline at end of file
diff --git a/config.d/controller/modules/files/cfstab b/config.d/controller/modules/files/cfstab
deleted file mode 100644
index 600b339..0000000
--- a/config.d/controller/modules/files/cfstab
+++ /dev/null
@@ -1,49 +0,0 @@
-# /etc/fstab: static file system information.
-#
-# noatime turns off atimes for increased performance (atimes normally aren't 
-# needed); notail increases performance of ReiserFS (at the expense of storage 
-# efficiency).  It's safe to drop the noatime options if you want and to 
-# switch between notail / tail freely.
-#
-# The root filesystem should have a pass number of either 0 or 1.
-# All other filesystems should have a pass number of 0 or greater than 1.
-#
-# See the manpage fstab(5) for more information.
-#
-
-# <fs>                  <mountpoint>    <type>          <opts>          <dump/pass>
-
-# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
-#
-# NOTE: Even though we list ext4 as the type here, it will work with ext2/ext3
-#       filesystems.  This just tells the kernel to use the ext4 driver.
-#
-# NOTE: You can use full paths to devices like /dev/sda3, but it is often
-#       more reliable to use filesystem labels or UUIDs. See your filesystem
-#       documentation for details on setting a label. To obtain the UUID, use
-#       the blkid(8) command.
-
-#LABEL=boot             /boot           ext4            noauto,noatime  1 2
-#UUID=58e72203-57d1-4497-81ad-97655bd56494              /               ext4            noatime         0 1
-#LABEL=swap             none            swap            sw              0 0
-#/dev/cdrom             /mnt/cdrom      auto            noauto,ro       0 0
-
-# BOOT
-LABEL=BOOT /boot btrfs ro,noatime,subvol=/bootfs 0 0
-
-# SYSTEM
-LABEL=SYSTEM / btrfs ro,noatime,subvol=/sysfs 0 0
-
-# USER-DATA
-LABEL=USERDATA /user-data btrfs	defaults,noatime,subvol=/userdata 0 0
-
-# HOME
-/user-data/persistent/home /home/ none rw,bind 0 0
-
-# HOME
-tmpfs /var/tmp tmpfs nodev,nosuid,size=512M 0 0
-
-# HOME
-tmpfs /tmp tmpfs nodev,nosuid,size=512M 0 0
-
-# EOF
\ No newline at end of file
diff --git a/config.d/controller/modules/files/cfstab.info b/config.d/controller/modules/files/cfstab.info
deleted file mode 100644
index 5b09303..0000000
--- a/config.d/controller/modules/files/cfstab.info
+++ /dev/null
@@ -1,10 +0,0 @@
-# This file realtes the filesystem's type of each device holding the related label
-# Example BOOT vfat will format the partition holding the label LABEL=BOOT with a vfat filesystem
-# This file, together with the fstab and devname.info are probably one of the most essential files
-# that the controller will be built on and use for booting.
-BOOT btrfs
-SYS btrfs
-USERDATA btrfs
-
-
-# EOF
\ No newline at end of file
diff --git a/config.d/controller/modules/files/cgrub b/config.d/controller/modules/files/cgrub
deleted file mode 100644
index 593b019..0000000
--- a/config.d/controller/modules/files/cgrub
+++ /dev/null
@@ -1,73 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-#
-# To populate all changes in this file you need to regenerate your
-# grub configuration file afterwards:
-#     'grub2-mkconfig -o /boot/grub/grub.cfg'
-#
-# See the grub info page for documentation on possible variables and
-# their associated values.
-
-GRUB_DISTRIBUTOR="Gentoo"
-
-# Default menu entry
-#GRUB_DEFAULT=0
-
-# Boot the default entry this many seconds after the menu is displayed
-#GRUB_TIMEOUT=5
-#GRUB_TIMEOUT_STYLE=menu
-
-# Append parameters to the linux kernel command line
-#GRUB_CMDLINE_LINUX=""
-#
-# Examples:
-#
-# Boot with network interface renaming disabled
-# GRUB_CMDLINE_LINUX="net.ifnames=0"
-#
-# Boot with systemd instead of sysvinit (openrc)
-# GRUB_CMDLINE_LINUX="init=/usr/lib/systemd/systemd"
-
-# Append parameters to the linux kernel command line for non-recovery entries
-#GRUB_CMDLINE_LINUX_DEFAULT=""
-
-# Uncomment to disable graphical terminal (grub-pc only)
-#GRUB_TERMINAL=console
-
-# The resolution used on graphical terminal.
-# Note that you can use only modes which your graphic card supports via VBE.
-# You can see them in real GRUB with the command `vbeinfo'.
-#GRUB_GFXMODE=640x480
-
-# Set to 'text' to force the Linux kernel to boot in normal text
-# mode, 'keep' to preserve the graphics mode set using
-# 'GRUB_GFXMODE', 'WIDTHxHEIGHT'['xDEPTH'] to set a particular
-# graphics mode, or a sequence of these separated by commas or
-# semicolons to try several modes in sequence.
-#GRUB_GFXPAYLOAD_LINUX=
-
-# Path to theme spec txt file.
-# The starfield is by default provided with use truetype.
-# NOTE: when enabling custom theme, ensure you have required font/etc.
-#GRUB_THEME="/boot/grub/themes/starfield/theme.txt"
-
-# Background image used on graphical terminal.
-# Can be in various bitmap formats.
-#GRUB_BACKGROUND="/boot/grub/mybackground.png"
-
-# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to kernel
-#GRUB_DISABLE_LINUX_UUID=true
-
-# Uncomment to disable generation of recovery mode menu entries
-#GRUB_DISABLE_RECOVERY=true
-
-# Uncomment to disable generation of the submenu and put all choices on
-# the top-level menu.
-# Besides the visual affect of no sub menu, this makes navigation of the
-# menu easier for a user who can't see the screen.
-#GRUB_DISABLE_SUBMENU=y
-
-# Uncomment to play a tone when the main menu is displayed.
-# This is useful, for example, to allow users who can't see the screen
-# to know when they can make a choice on the menu.
-#GRUB_INIT_TUNE="60 800 1"
diff --git a/config.d/controller/modules/files/chostname b/config.d/controller/modules/files/chostname
deleted file mode 100644
index e945a22..0000000
--- a/config.d/controller/modules/files/chostname
+++ /dev/null
@@ -1,5 +0,0 @@
-# Set to the hostname of this machine
-#
-hostname="localhost"
-
-# EOF
\ No newline at end of file
diff --git a/config.d/controller/modules/files/chosts b/config.d/controller/modules/files/chosts
deleted file mode 100644
index aab3b89..0000000
--- a/config.d/controller/modules/files/chosts
+++ /dev/null
@@ -1 +0,0 @@
-192.168.2.6/20,cpp,lzo localhost/5,cpp,lzo
diff --git a/config.d/controller/modules/files/cinject_files b/config.d/controller/modules/files/cinject_files
deleted file mode 100644
index 018613d..0000000
--- a/config.d/controller/modules/files/cinject_files
+++ /dev/null
@@ -1,11 +0,0 @@
-# This file will be used to inject files to the system before it is archived
-#
-# Syntax: {/path/at/local/file} {/path/to/file}
-# Example: /usr/lib64/foo /usr/lib64/bar -> rsync -aAXPhrv /usr/lib64/foo $DISTDIR/stage3/usr/lib64/bar
-
-
-
-
-
-
-# EOF
\ No newline at end of file
diff --git a/config.d/controller/modules/files/clocale.gen b/config.d/controller/modules/files/clocale.gen
deleted file mode 100644
index e43f238..0000000
--- a/config.d/controller/modules/files/clocale.gen
+++ /dev/null
@@ -1,491 +0,0 @@
-# /etc/locale.gen: list all of the locales you want to have on your system.
-# See the locale.gen(5) man page for more details.
-#
-# The format of each line:
-# <locale name> <charset>
-#
-# Where <locale name> starts with a name as found in /usr/share/i18n/locales/.
-# It must be unique in the file as it is used as the key to locale variables.
-# For non-default encodings, the <charset> is typically appended.
-#
-# Where <charset> is a charset located in /usr/share/i18n/charmaps/ (sans any
-# suffix like ".gz").
-#
-# All blank lines and lines starting with # are ignored.
-#
-# For the default list of supported combinations, see the file:
-# /usr/share/i18n/SUPPORTED
-#
-# Whenever glibc is emerged, the locales listed here will be automatically
-# rebuilt for you.  After updating this file, you can simply run `locale-gen`
-# yourself instead of re-emerging glibc.
-#
-# Note: You should always include en_US.UTF-8 UTF-8, even if you wont be using it later
-#
-#aa_DJ.UTF-8 UTF-8  
-#aa_DJ ISO-8859-1  
-#aa_ER UTF-8  
-#aa_ER@saaho UTF-8  
-#aa_ET UTF-8  
-#af_ZA.UTF-8 UTF-8  
-#af_ZA ISO-8859-1  
-#ak_GH UTF-8  
-#am_ET UTF-8  
-#an_ES.UTF-8 UTF-8  
-#an_ES ISO-8859-15  
-#anp_IN UTF-8  
-#ar_AE.UTF-8 UTF-8  
-#ar_AE ISO-8859-6  
-#ar_BH.UTF-8 UTF-8  
-#ar_BH ISO-8859-6  
-#ar_DZ.UTF-8 UTF-8  
-#ar_DZ ISO-8859-6  
-#ar_EG.UTF-8 UTF-8  
-#ar_EG ISO-8859-6  
-#ar_IN UTF-8  
-#ar_IQ.UTF-8 UTF-8  
-#ar_IQ ISO-8859-6  
-#ar_JO.UTF-8 UTF-8  
-#ar_JO ISO-8859-6  
-#ar_KW.UTF-8 UTF-8  
-#ar_KW ISO-8859-6  
-#ar_LB.UTF-8 UTF-8  
-#ar_LB ISO-8859-6  
-#ar_LY.UTF-8 UTF-8  
-#ar_LY ISO-8859-6  
-#ar_MA.UTF-8 UTF-8  
-#ar_MA ISO-8859-6  
-#ar_OM.UTF-8 UTF-8  
-#ar_OM ISO-8859-6  
-#ar_QA.UTF-8 UTF-8  
-#ar_QA ISO-8859-6  
-#ar_SA.UTF-8 UTF-8  
-#ar_SA ISO-8859-6  
-#ar_SD.UTF-8 UTF-8  
-#ar_SD ISO-8859-6  
-#ar_SS UTF-8  
-#ar_SY.UTF-8 UTF-8  
-#ar_SY ISO-8859-6  
-#ar_TN.UTF-8 UTF-8  
-#ar_TN ISO-8859-6  
-#ar_YE.UTF-8 UTF-8  
-#ar_YE ISO-8859-6  
-#ayc_PE UTF-8  
-#az_AZ UTF-8  
-#as_IN UTF-8  
-#ast_ES.UTF-8 UTF-8  
-#ast_ES ISO-8859-15  
-#be_BY.UTF-8 UTF-8  
-#be_BY CP1251  
-#be_BY@latin UTF-8  
-#bem_ZM UTF-8  
-#ber_DZ UTF-8  
-#ber_MA UTF-8  
-#bg_BG.UTF-8 UTF-8  
-#bg_BG CP1251  
-#bhb_IN.UTF-8 UTF-8  
-#bho_IN UTF-8  
-#bn_BD UTF-8  
-#bn_IN UTF-8  
-#bo_CN UTF-8  
-#bo_IN UTF-8  
-#br_FR.UTF-8 UTF-8  
-#br_FR ISO-8859-1  
-#br_FR@euro ISO-8859-15  
-#brx_IN UTF-8  
-#bs_BA.UTF-8 UTF-8  
-#bs_BA ISO-8859-2  
-#byn_ER UTF-8  
-#ca_AD.UTF-8 UTF-8  
-#ca_AD ISO-8859-15  
-#ca_ES.UTF-8 UTF-8  
-#ca_ES ISO-8859-1  
-#ca_ES@euro ISO-8859-15  
-#ca_FR.UTF-8 UTF-8  
-#ca_FR ISO-8859-15  
-#ca_IT.UTF-8 UTF-8  
-#ca_IT ISO-8859-15  
-#ce_RU UTF-8  
-#chr_US UTF-8  
-#cmn_TW UTF-8  
-#crh_UA UTF-8  
-#cs_CZ.UTF-8 UTF-8  
-#cs_CZ ISO-8859-2  
-#csb_PL UTF-8  
-#cv_RU UTF-8  
-#cy_GB.UTF-8 UTF-8  
-#cy_GB ISO-8859-14  
-#da_DK.UTF-8 UTF-8  
-#da_DK ISO-8859-1  
-#de_AT.UTF-8 UTF-8  
-#de_AT ISO-8859-1  
-#de_AT@euro ISO-8859-15  
-#de_BE.UTF-8 UTF-8  
-#de_BE ISO-8859-1  
-#de_BE@euro ISO-8859-15  
-#de_CH.UTF-8 UTF-8  
-#de_CH ISO-8859-1  
-#de_DE.UTF-8 UTF-8  
-#de_DE ISO-8859-1  
-#de_DE@euro ISO-8859-15  
-#de_IT.UTF-8 UTF-8  
-#de_IT ISO-8859-1  
-#de_LI.UTF-8 UTF-8  
-#de_LU.UTF-8 UTF-8  
-#de_LU ISO-8859-1  
-#de_LU@euro ISO-8859-15  
-#doi_IN UTF-8  
-#dv_MV UTF-8  
-#dz_BT UTF-8  
-#el_GR.UTF-8 UTF-8  
-#el_GR ISO-8859-7  
-#el_CY.UTF-8 UTF-8  
-#el_CY ISO-8859-7  
-#en_AG UTF-8  
-#en_AU.UTF-8 UTF-8  
-#en_AU ISO-8859-1  
-#en_BW.UTF-8 UTF-8  
-#en_BW ISO-8859-1  
-#en_CA.UTF-8 UTF-8  
-#en_CA ISO-8859-1  
-#en_DK.UTF-8 UTF-8  
-#en_DK ISO-8859-1  
-#en_GB.UTF-8 UTF-8  
-#en_GB ISO-8859-1  
-#en_HK.UTF-8 UTF-8  
-#en_HK ISO-8859-1  
-#en_IE.UTF-8 UTF-8  
-#en_IE ISO-8859-1  
-#en_IE@euro ISO-8859-15  
-#en_IL UTF-8  
-#en_IN UTF-8  
-#en_NG UTF-8  
-#en_NZ.UTF-8 UTF-8  
-#en_NZ ISO-8859-1  
-#en_PH.UTF-8 UTF-8  
-#en_PH ISO-8859-1  
-#en_SG.UTF-8 UTF-8  
-#en_SG ISO-8859-1  
-en_US.UTF-8 UTF-8  
-#en_US ISO-8859-1  
-#en_ZA.UTF-8 UTF-8  
-#en_ZA ISO-8859-1  
-#en_ZM UTF-8  
-#en_ZW.UTF-8 UTF-8  
-#en_ZW ISO-8859-1  
-#eo UTF-8  
-#es_AR.UTF-8 UTF-8  
-#es_AR ISO-8859-1  
-#es_BO.UTF-8 UTF-8  
-#es_BO ISO-8859-1  
-#es_CL.UTF-8 UTF-8  
-#es_CL ISO-8859-1  
-#es_CO.UTF-8 UTF-8  
-#es_CO ISO-8859-1  
-#es_CR.UTF-8 UTF-8  
-#es_CR ISO-8859-1  
-#es_CU UTF-8  
-#es_DO.UTF-8 UTF-8  
-#es_DO ISO-8859-1  
-#es_EC.UTF-8 UTF-8  
-#es_EC ISO-8859-1  
-#es_ES.UTF-8 UTF-8  
-#es_ES ISO-8859-1  
-#es_ES@euro ISO-8859-15  
-#es_GT.UTF-8 UTF-8  
-#es_GT ISO-8859-1  
-#es_HN.UTF-8 UTF-8  
-#es_HN ISO-8859-1  
-#es_MX.UTF-8 UTF-8  
-#es_MX ISO-8859-1  
-#es_NI.UTF-8 UTF-8  
-#es_NI ISO-8859-1  
-#es_PA.UTF-8 UTF-8  
-#es_PA ISO-8859-1  
-#es_PE.UTF-8 UTF-8  
-#es_PE ISO-8859-1  
-#es_PR.UTF-8 UTF-8  
-#es_PR ISO-8859-1  
-#es_PY.UTF-8 UTF-8  
-#es_PY ISO-8859-1  
-#es_SV.UTF-8 UTF-8  
-#es_SV ISO-8859-1  
-#es_US.UTF-8 UTF-8  
-#es_US ISO-8859-1  
-#es_UY.UTF-8 UTF-8  
-#es_UY ISO-8859-1  
-#es_VE.UTF-8 UTF-8  
-#es_VE ISO-8859-1  
-#et_EE.UTF-8 UTF-8  
-#et_EE ISO-8859-1  
-#et_EE.ISO-8859-15 ISO-8859-15  
-#eu_ES.UTF-8 UTF-8  
-#eu_ES ISO-8859-1  
-#eu_ES@euro ISO-8859-15  
-#fa_IR UTF-8  
-#ff_SN UTF-8  
-#fi_FI.UTF-8 UTF-8  
-#fi_FI ISO-8859-1  
-#fi_FI@euro ISO-8859-15  
-#fil_PH UTF-8  
-#fo_FO.UTF-8 UTF-8  
-#fo_FO ISO-8859-1  
-#fr_BE.UTF-8 UTF-8  
-#fr_BE ISO-8859-1  
-#fr_BE@euro ISO-8859-15  
-#fr_CA.UTF-8 UTF-8  
-#fr_CA ISO-8859-1  
-#fr_CH.UTF-8 UTF-8  
-#fr_CH ISO-8859-1  
-#fr_FR.UTF-8 UTF-8  
-#fr_FR ISO-8859-1  
-#fr_FR@euro ISO-8859-15  
-#fr_LU.UTF-8 UTF-8  
-#fr_LU ISO-8859-1  
-#fr_LU@euro ISO-8859-15  
-#fur_IT UTF-8  
-#fy_NL UTF-8  
-#fy_DE UTF-8  
-#ga_IE.UTF-8 UTF-8  
-#ga_IE ISO-8859-1  
-#ga_IE@euro ISO-8859-15  
-#gd_GB.UTF-8 UTF-8  
-#gd_GB ISO-8859-15  
-#gez_ER UTF-8  
-#gez_ER@abegede UTF-8  
-#gez_ET UTF-8  
-#gez_ET@abegede UTF-8  
-#gl_ES.UTF-8 UTF-8  
-#gl_ES ISO-8859-1  
-#gl_ES@euro ISO-8859-15  
-#gu_IN UTF-8  
-#gv_GB.UTF-8 UTF-8  
-#gv_GB ISO-8859-1  
-#ha_NG UTF-8  
-#hak_TW UTF-8  
-#he_IL.UTF-8 UTF-8  
-#he_IL ISO-8859-8  
-#hi_IN UTF-8  
-#hne_IN UTF-8  
-#hr_HR.UTF-8 UTF-8  
-#hr_HR ISO-8859-2  
-#hsb_DE ISO-8859-2  
-#hsb_DE.UTF-8 UTF-8  
-#ht_HT UTF-8  
-#hu_HU.UTF-8 UTF-8  
-#hu_HU ISO-8859-2  
-#hy_AM UTF-8  
-#hy_AM.ARMSCII-8 ARMSCII-8  
-#ia_FR UTF-8  
-#id_ID.UTF-8 UTF-8  
-#id_ID ISO-8859-1  
-#ig_NG UTF-8  
-#ik_CA UTF-8  
-#is_IS.UTF-8 UTF-8  
-#is_IS ISO-8859-1  
-#it_CH.UTF-8 UTF-8  
-#it_CH ISO-8859-1  
-#it_IT.UTF-8 UTF-8  
-#it_IT ISO-8859-1  
-#it_IT@euro ISO-8859-15  
-#iu_CA UTF-8  
-#ja_JP.EUC-JP EUC-JP  
-#ja_JP.UTF-8 UTF-8  
-#ka_GE.UTF-8 UTF-8  
-#ka_GE GEORGIAN-PS  
-#kk_KZ.UTF-8 UTF-8  
-#kk_KZ PT154  
-#kl_GL.UTF-8 UTF-8  
-#kl_GL ISO-8859-1  
-#km_KH UTF-8  
-#kn_IN UTF-8  
-#ko_KR.EUC-KR EUC-KR  
-#ko_KR.UTF-8 UTF-8  
-#kok_IN UTF-8  
-#ks_IN UTF-8  
-#ks_IN@devanagari UTF-8  
-#ku_TR.UTF-8 UTF-8  
-#ku_TR ISO-8859-9  
-#kw_GB.UTF-8 UTF-8  
-#kw_GB ISO-8859-1  
-#ky_KG UTF-8  
-#lb_LU UTF-8  
-#lg_UG.UTF-8 UTF-8  
-#lg_UG ISO-8859-10  
-#li_BE UTF-8  
-#li_NL UTF-8  
-#lij_IT UTF-8  
-#ln_CD UTF-8  
-#lo_LA UTF-8  
-#lt_LT.UTF-8 UTF-8  
-#lt_LT ISO-8859-13  
-#lv_LV.UTF-8 UTF-8  
-#lv_LV ISO-8859-13  
-#lzh_TW UTF-8  
-#mag_IN UTF-8  
-#mai_IN UTF-8  
-#mg_MG.UTF-8 UTF-8  
-#mg_MG ISO-8859-15  
-#mhr_RU UTF-8  
-#mi_NZ.UTF-8 UTF-8  
-#mi_NZ ISO-8859-13  
-#mk_MK.UTF-8 UTF-8  
-#mk_MK ISO-8859-5  
-#ml_IN UTF-8  
-#mn_MN UTF-8  
-#mni_IN UTF-8  
-#mr_IN UTF-8  
-#ms_MY.UTF-8 UTF-8  
-#ms_MY ISO-8859-1  
-#mt_MT.UTF-8 UTF-8  
-#mt_MT ISO-8859-3  
-#my_MM UTF-8  
-#nan_TW UTF-8  
-#nan_TW@latin UTF-8  
-#nb_NO.UTF-8 UTF-8  
-#nb_NO ISO-8859-1  
-#nds_DE UTF-8  
-#nds_NL UTF-8  
-#ne_NP UTF-8  
-#nhn_MX UTF-8  
-#niu_NU UTF-8  
-#niu_NZ UTF-8  
-#nl_AW UTF-8  
-#nl_BE.UTF-8 UTF-8  
-#nl_BE ISO-8859-1  
-#nl_BE@euro ISO-8859-15  
-#nl_NL.UTF-8 UTF-8  
-#nl_NL ISO-8859-1  
-#nl_NL@euro ISO-8859-15  
-#nn_NO.UTF-8 UTF-8  
-#nn_NO ISO-8859-1  
-#nr_ZA UTF-8  
-#nso_ZA UTF-8  
-#oc_FR.UTF-8 UTF-8  
-#oc_FR ISO-8859-1  
-#om_ET UTF-8  
-#om_KE.UTF-8 UTF-8  
-#om_KE ISO-8859-1  
-#or_IN UTF-8  
-#os_RU UTF-8  
-#pa_IN UTF-8  
-#pa_PK UTF-8  
-#pap_AW UTF-8  
-#pap_CW UTF-8  
-#pl_PL.UTF-8 UTF-8  
-#pl_PL ISO-8859-2  
-#ps_AF UTF-8  
-#pt_BR.UTF-8 UTF-8  
-#pt_BR ISO-8859-1  
-#pt_PT.UTF-8 UTF-8  
-#pt_PT ISO-8859-1  
-#pt_PT@euro ISO-8859-15  
-#quz_PE UTF-8  
-#raj_IN UTF-8  
-#ro_RO.UTF-8 UTF-8  
-#ro_RO ISO-8859-2  
-#ru_RU.KOI8-R KOI8-R  
-#ru_RU.UTF-8 UTF-8  
-#ru_RU ISO-8859-5  
-#ru_UA.UTF-8 UTF-8  
-#ru_UA KOI8-U  
-#rw_RW UTF-8  
-#sa_IN UTF-8  
-#sat_IN UTF-8  
-#sc_IT UTF-8  
-#sd_IN UTF-8  
-#sd_IN@devanagari UTF-8  
-#se_NO UTF-8  
-#sgs_LT UTF-8  
-#shs_CA UTF-8  
-#si_LK UTF-8  
-#sid_ET UTF-8  
-#sk_SK.UTF-8 UTF-8  
-#sk_SK ISO-8859-2  
-#sl_SI.UTF-8 UTF-8  
-#sl_SI ISO-8859-2  
-#so_DJ.UTF-8 UTF-8  
-#so_DJ ISO-8859-1  
-#so_ET UTF-8  
-#so_KE.UTF-8 UTF-8  
-#so_KE ISO-8859-1  
-#so_SO.UTF-8 UTF-8  
-#so_SO ISO-8859-1  
-#sq_AL.UTF-8 UTF-8  
-#sq_AL ISO-8859-1  
-#sq_MK UTF-8  
-#sr_ME UTF-8  
-#sr_RS UTF-8  
-#sr_RS@latin UTF-8  
-#ss_ZA UTF-8  
-#st_ZA.UTF-8 UTF-8  
-#st_ZA ISO-8859-1  
-#sv_FI.UTF-8 UTF-8  
-#sv_FI ISO-8859-1  
-#sv_FI@euro ISO-8859-15  
-#sv_SE.UTF-8 UTF-8  
-#sv_SE ISO-8859-1  
-#sw_KE UTF-8  
-#sw_TZ UTF-8  
-#szl_PL UTF-8  
-#ta_IN UTF-8  
-#ta_LK UTF-8  
-#tcy_IN.UTF-8 UTF-8  
-#te_IN UTF-8  
-#tg_TJ.UTF-8 UTF-8  
-#tg_TJ KOI8-T  
-#th_TH.UTF-8 UTF-8  
-#th_TH TIS-620  
-#the_NP UTF-8  
-#ti_ER UTF-8  
-#ti_ET UTF-8  
-#tig_ER UTF-8  
-#tk_TM UTF-8  
-#tl_PH.UTF-8 UTF-8  
-#tl_PH ISO-8859-1  
-#tn_ZA UTF-8  
-#tr_CY.UTF-8 UTF-8  
-#tr_CY ISO-8859-9  
-#tr_TR.UTF-8 UTF-8  
-#tr_TR ISO-8859-9  
-#ts_ZA UTF-8  
-#tt_RU UTF-8  
-#tt_RU@iqtelif UTF-8  
-#ug_CN UTF-8  
-#uk_UA.UTF-8 UTF-8  
-#uk_UA KOI8-U  
-#unm_US UTF-8  
-#ur_IN UTF-8  
-#ur_PK UTF-8  
-#uz_UZ.UTF-8 UTF-8  
-#uz_UZ ISO-8859-1  
-#uz_UZ@cyrillic UTF-8  
-#ve_ZA UTF-8  
-#vi_VN UTF-8  
-#wa_BE ISO-8859-1  
-#wa_BE@euro ISO-8859-15  
-#wa_BE.UTF-8 UTF-8  
-#wae_CH UTF-8  
-#wal_ET UTF-8  
-#wo_SN UTF-8  
-#xh_ZA.UTF-8 UTF-8  
-#xh_ZA ISO-8859-1  
-#yi_US.UTF-8 UTF-8  
-#yi_US CP1255  
-#yo_NG UTF-8  
-#yue_HK UTF-8  
-#zh_CN.GB18030 GB18030  
-#zh_CN.GBK GBK  
-#zh_CN.UTF-8 UTF-8  
-#zh_CN GB2312  
-#zh_HK.UTF-8 UTF-8  
-#zh_HK BIG5-HKSCS  
-#zh_SG.UTF-8 UTF-8  
-#zh_SG.GBK GBK  
-#zh_SG GB2312  
-#zh_TW.EUC-TW EUC-TW  
-#zh_TW.UTF-8 UTF-8  
-#zh_TW BIG5  
-#zu_ZA.UTF-8 UTF-8  
-#zu_ZA ISO-8859-1  
-#EOF
diff --git a/config.d/controller/modules/files/cnet b/config.d/controller/modules/files/cnet
deleted file mode 100644
index 30a5030..0000000
--- a/config.d/controller/modules/files/cnet
+++ /dev/null
@@ -1,11 +0,0 @@
-# Please note that for now, only ethernet is supported by the controller.
-# Meaning that dracut will require extra configuration options from the kernel command line
-# for the boot process, to enable early networking. Therefore don't confuse this area the controllers
-# networking options. Exotic options imply exotic boot commands
-#
-# For more informations about the boot command line, please visit the documentations submenu
-# 
-config_net-int=("dhcp")
-# modules_net-int=(" ")
-
-# EOF
\ No newline at end of file
diff --git a/config.d/controller/modules/files/crunlevels b/config.d/controller/modules/files/crunlevels
deleted file mode 100644
index 2b544cb..0000000
--- a/config.d/controller/modules/files/crunlevels
+++ /dev/null
@@ -1,14 +0,0 @@
-# Runlevel entries
-#
-# Add or remove entries from a specific runlevel
-# Please use this section with care! Misconfiguration here will make your system unbootable.
-#
-# Syntax: {daemon} {add/dell} {runlevel}
-# Example: distccd add default -> rc-update add distccd default
-#
-# This section together with custom scripts file, can make the system unbootable
-consolefont add boot
-
-
-
-# EOF
\ No newline at end of file
diff --git a/config.d/controller/modules/files/cssh.pub b/config.d/controller/modules/files/cssh.pub
deleted file mode 100644
index 20239c5..0000000
--- a/config.d/controller/modules/files/cssh.pub
+++ /dev/null
@@ -1,14 +0,0 @@
-# Public ssh key
-# 
-# This option will include the ssh pub key to the built system
-#
-# in the ~/.ssh/authorized_keys
-# If you don't enable sshd and authorized_keys, this key wont do anything
-#
-# To include an ssh private key to the hosts please referee to the inject_files submenu entry
-#
-
-
-
-
-# EOF
\ No newline at end of file
diff --git a/config.d/controller/modules/files/csshd b/config.d/controller/modules/files/csshd
deleted file mode 100644
index 2f728d2..0000000
--- a/config.d/controller/modules/files/csshd
+++ /dev/null
@@ -1,149 +0,0 @@
-#	$OpenBSD: sshd_config,v 1.99 2016/07/11 03:19:44 tedu Exp $
-
-# This is the sshd server system-wide configuration file.  See
-# sshd_config(5) for more information.
-
-# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
-
-# The strategy used for options in the default sshd_config shipped with
-# OpenSSH is to specify options with their default value where
-# possible, but leave them commented.  Uncommented options override the
-# default value.
-
-#Port 22
-#AddressFamily any
-#ListenAddress 0.0.0.0
-#ListenAddress ::
-
-# The default requires explicit activation of protocol 1
-#Protocol 2
-
-# HostKey for protocol version 1
-#HostKey /etc/ssh/ssh_host_key
-# HostKeys for protocol version 2
-#HostKey /etc/ssh/ssh_host_rsa_key
-#HostKey /etc/ssh/ssh_host_dsa_key
-#HostKey /etc/ssh/ssh_host_ecdsa_key
-#HostKey /etc/ssh/ssh_host_ed25519_key
-
-# Lifetime and size of ephemeral version 1 server key
-#KeyRegenerationInterval 1h
-#ServerKeyBits 1024
-
-# Ciphers and keying
-#RekeyLimit default none
-
-# Logging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2m
-#PermitRootLogin prohibit-password
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-#RSAAuthentication yes
-#PubkeyAuthentication yes
-
-# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
-# but this is overridden so installations will only check .ssh/authorized_keys
-#AuthorizedKeysFile	.ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
-#RhostsRSAAuthentication no
-# similar for protocol version 2
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# RhostsRSAAuthentication and HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-#IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-PasswordAuthentication no
-#PermitEmptyPasswords no
-
-# Change to no to disable s/key passwords
-#ChallengeResponseAuthentication yes
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-UsePAM yes
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-#X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PermitTTY yes
-PrintMotd no
-PrintLastLog no
-#TCPKeepAlive yes
-#UseLogin no
-#UsePrivilegeSeparation sandbox
-#PermitUserEnvironment no
-#Compression delayed
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS no
-#PidFile /run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# override default of no subsystems
-Subsystem	sftp	/usr/lib64/misc/sftp-server
-
-# the following are HPN related configuration options
-# tcp receive buffer polling. disable in non autotuning kernels
-#TcpRcvBufPoll yes
-
-# disable hpn performance boosts
-#HPNDisabled no
-
-# buffer size for hpn to non-hpn connections
-#HPNBufferSize 2048
-
-
-# allow the use of the none cipher
-#NoneEnabled no
-
-# Example of overriding settings on a per-user basis
-#Match User anoncvs
-#	X11Forwarding no
-#	AllowTcpForwarding no
-#	PermitTTY no
-#	ForceCommand cvs server
-
-# Allow client to pass locale environment variables #367017
-AcceptEnv LANG LC_*
diff --git a/config.d/controller/modules/files/ctimezone b/config.d/controller/modules/files/ctimezone
deleted file mode 100644
index 7ac3f6d..0000000
--- a/config.d/controller/modules/files/ctimezone
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/bash
-
-#
-# Edit this file for timezone configuration
-# Example: TIMEZONE="Europe/Athens"
-# If you leave TMZ, then timezone will be set to UTC
-#
-
-TIMEZONE=TMZ
-export TIMEZONE
-#
\ No newline at end of file
diff --git a/config.d/controller/modules/files/cystem_links b/config.d/controller/modules/files/cystem_links
deleted file mode 100644
index d110980..0000000
--- a/config.d/controller/modules/files/cystem_links
+++ /dev/null
@@ -1,28 +0,0 @@
-# Symlinks, bind-mounts,  overlas and tmpfs
-# Please follow the examples to configure any symlinks you wish to create automatically
-# 
-# Symlink options: symlink {f=y/n} {path} {source} {target}
-# Example 1: symlink f=n /etc/conf.d/net /user-data/local/net
-# This will be translated as: ln -s /etc/conf.d/net /user-data/local/net
-#
-# On the other hand, this: symlink f=y /user-data/custom-location /etc/conf.d/net /user-data/custom-location/net
-# is translated as: mkdir -p /user-data/custom-location && ln -s /etc/conf.d/net /user-data/custom-location/net
-#
-# Bind mount options: bindmount {f=y/n} {path} {source} {target}
-# Example 2: bindmount f=y /user-data/local/home/user /home/user/data /user-data/local/home/user/data
-# Same as: mkdir -p /user-data/local/home/user && /home/user/data /user-data/local/home/user/data none rw,bind 0 0
-#
-# Overlay options: overlay {lowerdir} {uperdir} {workdir}
-# Example 3: overlay /etc/conf.d /user-data/persistent/conf.d /user-data/persistent/conf.d.work
-# Same as: overlay /merged overlay noauto,lowerdir=/etc/conf.d,uperdir=/user-data/persistent/conf.d,workdir=/user-data/persistent/conf.d.work 0 0
-#
-# Tmpfs options: tmpfs {source} opt
-# Example 4: tmpfs /var/logs nodev,nosuid,noexec,nodiratime,size=64M
-# Same as tmpfs /var/logs tmpfs nodev,nosuid,noexec,nodiratime,size=64M 0 0
-#
-#
-
-
-
-
-# EOF
\ No newline at end of file
diff --git a/config.d/controller/modules/files/dracut_modules b/config.d/controller/modules/files/dracut_modules
deleted file mode 100644
index dc01240..0000000
--- a/config.d/controller/modules/files/dracut_modules
+++ /dev/null
@@ -1,63 +0,0 @@
-bash
-bootchart
-dash
-caps
-modsign
-rescue
-watchdog
-busybox
-i18n
-convertfs
-network
-ifcfg
-url-lib
-drm
-gensplash
-plymouth
-cms
-btrfs
-crypt
-dm
-dmraid
-dmsquash-live
-kernel-modules
-kernel-network-modules
-livenet
-lvm
-mdraid
-multipath
-qemu
-qemu-net
-crypt-gpg
-crypt-loop
-cifs
-dasd
-dasd_mod
-dasd_rules
-fcoe-uefi
-fstab-sys
-iscsi
-nbd
-nfs
-resume
-rootfs-block
-ssh-client
-terminfo
-udev-rules
-virtfs
-zfcp
-zfcp_rules
-znet
-securityfs
-biosdevname
-masterkey
-ecryptfs
-integrity
-pollcdrom
-syslog
-usrmount
-base
-fs-lib
-img-lib
-shutdown
-uefi-lib