path: root/Install.in

#!/bin/sh
### Copyright (C) 1991, 1992, Cygnus Support
### All Rights Reserved.

### This really needs to nestle up snuggly to the Release notes.  If you change
### this script, please be sure the release notes get coordinated too.

set -e

### this is our version number.
VERSION=cygnus-sol2-||RELNO||

### this is the default installation repository. We use this to test whether or
### not GCC_EXEC_PREFIX should be set when doing "Install test comp-tools".
#INSTALLDIR_DEFAULT=/giga/rich/tmp/installdir
INSTALLDIR_REAL=/opt
INSTALLDIR_DEFAULT=${INSTALLDIR_REAL}
### this is where we install into.  (useful for testing).
INSTALLDIR=${INSTALLDIR_DEFAULT}

### where to write the log files
LOGDIR=${INSTALLDIR}/${VERSION}

### who to call in bad situations
HOTLINE="the Cygnus Support Hotline at +1 415 322 7836"

### what the release doc is called and a few sections thereof
NOTES="the Installation Notes"
CHANGING_PATHS="\"Changing the Paths\""
NO_ACCESS="\"No Access to ${INSTALLDIR}\?\""
MIGHT_WRONG="\"Some Things that Might go Wrong\""
WHY_FIXINCLUDES="Why Convert System Header Files\?"
ANOTHER_TAPE="\"Steps to install with another machine\'s tape drive\""

### for debugging
#PATH=/bin:/usr/bin ; export PATH

### default the tape device
case "${TAPE}" in
  "") TAPE=||DEVdflt|| 
      ;;
  *) 
      ;;
esac # ${TAPE}

### clear and/or initialize some variables
ARCH=
TOOLS=
FTPRELEASE=no

REMOVE=no
EXTRACT=no
FIXINCLUDES=no
TESTINSTALLATION=no

INSTALLHOST=default
ERROR=

### where the binaries are in the release
#EXECDIR=${VERSION}/H-${INSTALLHOST}
EXECDIR=${VERSION}

### some tool defaults
### perhaps these should be hard coded to absolute paths instead?
TAR=tar
TARKEYS="xvvopf -"
SED=sed
MT=mt

### trigger words on the command line are:
###     bin, src
###     emacs, comp-tools
###     -tape=/dev/device
###     -installdir=/foo
###     extract, fixincludes, test-installation, remove

for arg in $* ; do
        case "${arg}" in
### options
        -tape=* | --tape=* | --tap=* | --ta=* | --t=*)
                TAPE=`echo ${arg} | ${SED} 's/-*t[a-z]*=//'`
                ;;

        -installdir=* | --installdir=* | --installdi=* | --installd=* | --install=* | --instal=* | --insta=* | --inst=* | --ins=* | --in=* | --i=*)
                INSTALLDIR=`echo ${arg} | ${SED} 's/-*i[a-z]*=//'`
		# we will make it an absolute path shortly.
                ;;

### actions
        *remove* | rm | -rm | --rm)     ACTIONS="${ACTIONS} rm" ;;
        *extract*)      ACTIONS="${ACTIONS} extract" ;;
        *fix*)          ACTIONS="${ACTIONS} fix" ;;
        *test*)         ACTIONS="${ACTIONS} test" ;;
### hosts
        *src* | *sour*) ARCH="${ARCH} src" ;;
        *bin*)          ARCH="${ARCH} bin" ;;

### packages
        *emacs*)        TOOLS="${TOOLS} emacs" ;;
        *comp*)         TOOLS="${TOOLS} comp" ;;
        *help*) ERROR=true ;;
        *)
                echo '***' I do not understand the option \"${arg}\".
                ERROR=true
                ;;
        esac # ${arg}
done # arg in $*

###
###
### check for a myriad of sins
###
###

if [ ! -d "${INSTALLDIR}" ] ; then
	echo '*** ' Can not cd to \"${INSTALLDIR}\" because it does not exist.
	echo '*** ' Try creating it with \"mkdir ${INSTALLDIR}\" and then try running Install again.
	exit 1
else
	if (cd "${INSTALLDIR}") ; then 
		true
	else
		echo '*** ' Can not cd to \"${INSTALLDIR}\" because I do not have execute permission.
		ls -lad ${INSTALLDIR}
		echo '*** ' Please fix this and then try running Install again.
		exit 1
	fi   # ! cd ${INSTALLDIR}
fi   # ! -d ${INSTALLDIR}

# Make INSTALLDIR absolute (parts below might need it that way).
# FIXME, do they really?
# FIXME, handle pwd failure from upper dir permission
INSTALLDIR=`cd ${INSTALLDIR} ; pwd`
LOGDIR=${INSTALLDIR}/${VERSION}

case "${ERROR}" in
  "")
### default tools
        case "${TOOLS}" in
          "") TOOLS="||BUNDLE||" ;;
          *) ;;
        esac # ${TOOLS}

        INSTALLHOST=

### decide where we are: try arch first.
        if (arch) > /dev/null 2>&1 ; then
                MAYBE=`arch`
        else
                true
        fi # (arch)

        case "${MAYBE}" in
          sun3) INSTALLHOST=${MAYBE} 
		;;
          *)
### next try uname
                if (uname > /dev/null) 2>&1 ; then
                        UNAME=`echo \`uname -s\`\`uname -m\`\`uname -r\``
                else
                        UNAME="machine without a uname command (type of machine unknown)"
                fi # (uname)

### map into names we recognize
                case "${UNAME}" in
                  AIX*)
                  	INSTALLHOST=rs6000
                        MT=tctl
                        ;;
                  ULTRIXRISC)     INSTALLHOST=decstation ;;
                  SunOSsun4*5*)   INSTALLHOST=sparc-sun-solaris2 ;;
                  SunOSsun4*)     INSTALLHOST=sun4 ;;
                  SunOSsun3*)     INSTALLHOST=sun3 ;;
                  IRIX*)          INSTALLHOST=iris4 ;;
                  *)              INSTALLHOST=unknown ;;
                esac # ${UNAME}
                ;;
        esac # ${MAYBE}

### default arch
        case "${ARCH}" in
          "")     ARCH="bin src" ;;
          *) ;;
        esac # ${ARCH}

### default actions

        case "${ACTIONS}" in
          "")
                case "${FTPRELEASE}" in
                  "yes") ACTIONS="test" ;;
                  "no" ) ACTIONS="extract test" ;;
                esac # ${FTPRELEASE}


### fixincludes only if comp-tools
                for tool in ${TOOLS} ; do
                        case ${tool} in
                          comp)
                                if echo ${ARCH} | grep bin > /dev/null 2>&1 ; then
                                        ACTIONS="${ACTIONS} fix"
                                fi
                                ;;
                          *) ;;
                        esac # ${TOOLS}
                done # for tool in ${TOOLS}
                ;;
        *) ;;
        esac # ${ACTIONS}
        ;;
  *) ;;
esac  # ${ERROR}

case "${ERROR}" in
  "")
### if binaries are not intended for this machine
        case "${INSTALLHOST}" in
        "||HOSTstr||") ### binaries are intended for this machine
                for action in ${ACTIONS} ; do
                        case ${action} in
                        test)
                                for tool in ${TOOLS} ; do
					OURWD=`(cd ${INSTALLDIR}; pwd) 2>/dev/null`
					DEFAULTWD=`(cd ${INSTALLDIR_REAL}; pwd) 2>/dev/null`
                                        case ${tool} in
                                        comp)
                                                case "${OURWD}" in
                                                  "${DEFAULTWD}") ;;
                                                  *)
        echo '***' If you want to use the compilation tools in an alternate
        echo '***   ' directory, GCC_EXEC_PREFIX must be set.  You probably
        echo '***   ' want to set it with:
        echo GCC_EXEC_PREFIX=${INSTALLDIR}/${EXECDIR}/lib/gcc-lib/||HOSTstr||/||GCCvn||/ ; export GCC_EXEC_PREFIX
        GCC_EXEC_PREFIX=${INSTALLDIR}/${EXECDIR}/lib/gcc-lib/||HOSTstr||/||GCCvn||/ ; export GCC_EXEC_PREFIX
        echo '***   ' This is what I will use for the installation tests.
						   # skip C++ msg on Solaris
						   case "${INSTALLHOST}" in
						   sparc-sun-solaris2) ;;
						   *)
        echo '***   ' And for g++ I will use the options:
        echo '***   '   -I${INSTALLDIR}/${EXECDIR}/lib/g++-include
        echo '***   '        -L${INSTALLDIR}/${EXECDIR}/lib
							;;
						   esac # ${INSTALLHOST}
        echo '***   ' For further help, please refer to ${CHANGING_PATHS}
        echo '***   ' in ${NOTES}.

        GPLUSOPTIONS="-I${INSTALLDIR}/${EXECDIR}/lib/g++-include -L${INSTALLDIR}/${EXECDIR}/lib"
                                                  ;;
                                                esac # ${INSTALLDIR}
                                                ;;
                                        emacs)
                                                case "${OURWD}" in
                                                  "${DEFAULTWD}") ;;
                                                  *)
                                                        echo '***' I cannot test Emacs.
                                                        echo '***   ' The provided Emacs binary can only run from the default
                                                        echo '***   ' installation directory.  If you wish to run emacs, please
                                                        echo '***   ' refer to ${CHANGING_PATHS} in ${NOTES}.
                                                        exit 1
                                                        ;;
                                                esac # ${INSTALLDIR}
                                                ;;
                                          *) true ;;
                                        esac # ${tool}
                                done # for tool in ${TOOLS}
                                ;;
                          *) true ;;
                        esac # ${action}
                done # for action in ${ACTIONS}
                ;;

        *)
                for action in ${ACTIONS} ; do
                        case ${action} in
                          rm | extract)   true ;;
                          fix)
                                if echo ${TOOLS} | grep comp > /dev/null ; then
                                        NOTFIXED="fixincludes"
                                        if echo ${ACTIONS} | grep test > /dev/null ; then
                                                JOINER=" or "
                                        else
                                                true
                                        fi # echo ${ACTIONS}
                                else
#                                       echo '***' If you only install Emacs you do not need to run fixincludes.
#                                       ERROR=true
                                        true
                                fi # echo ${TOOLS}
                                ;;
                          test)   NOTTESTED="the installation tests" ;;
                        esac # ${action}
                done # for action in ${ACTIONS}
                ;;
        esac # ${INSTALLHOST}
        ;;
  *) ;;
esac # ${ERROR}

if [ -n "${NOTFIXED}" -o -n "${NOTTESTED}" ] ; then
        case "${INSTALLHOST}" in
          "||HOSTstr||") ;;
          *)
                echo '***   ' This machine appears to be a \"${INSTALLHOST}\".
                echo '***   ' You may still run \"$0 -extract ...\" on this machine and then
                echo '***   ' run the other steps on the machine on which you wish to install.
                echo '***   ' You will need to do these steps separately.
                echo '***   ' For more information, please refer to
                echo '***   ' ${ANOTHER_TAPE} in ${NOTES}.
                ERROR=true
                ;;
        esac # ${INSTALLHOST}
fi # [ -n ${NOTFIXED -o -n ${NOTTESTED} ]

### if we can't read the tape drive...
popdir=`pwd`

if [ ! -d "${LOGDIR}" ] ; then
	if mkdir ${LOGDIR}; then
		true
	else
		echo '*** ' Can not write logs to \"${LOGDIR}\" because it does not exist.
		echo '*** ' Try creating it with \"mkdir ${LOGDIR}\" and then try running Install again.
		exit 1
	fi
else
        if [ ! -w "${LOGDIR}" ] ; then
                echo '*** ' Can not write logs to \"${LOGDIR}\" because I do not have write permission.
                ls -lad ${LOGDIR}
                echo '*** ' Please fix this and then try running Install again.
                exit 1
        fi   # ! -r ${LOGDIR}
fi   # ! -d ${LOGDIR}


cd ${INSTALLDIR}

### There is a window here that I don't know how to handle gracefully from
### shell.  If the directory DID exist and WAS executable but dissappeared
### before we could cd into it, we're kinda hosed.  If you get a call about
### this, make sure the directory exists, is readable, is executable, is the
### either the default installation directory or the -installdir=directory
### given on the command line.  Then ask them to just try again.  A few times.
### If you get the same error every time, we've got a very strange bug.  I
### can't help you.

if [ "$?" != "0" ] ; then
        echo '***' Cannot cd to \"${INSTALLDIR}\".  This is a problem.
        echo '***   ' For further help, please refer to
        echo '***   ' ${NO_ACCESS} in ${NOTES} or call
        echo '***   ' ${HOTLINE}
        exit 1
fi

if echo ${ACTIONS} | grep extract > /dev/null ; then
        if [ -z "${ERROR}" -a ! -r "${TAPE}" ] ; then
        ### try checking for a relative tape path
                if [ -r ${popdir}/${TAPE} ] ; then
                        TAPE=${popdir}/${TAPE}
                        echo '***' Using TAPE device \"${TAPE}\".
                else
                        echo '***' Can not read from TAPE device, \"${TAPE}\".
                        cd ${popdir} ; ls -lasd ${TAPE}
                        echo '***   ' Try using \"./Install -tape=/dev/something ...\" to name your tape
                        echo '***   ' drive or refer to ${MIGHT_WRONG} in
                        echo '***   ' ${NOTES}.
                        exit 1
                fi  # ! -r ${popdir}/${TAPE}
        fi   # -z ${ERROR}
fi   # extract in ${ACTIONS}

cd ${popdir}

### bail out

case "${ERROR}" in
"") ;;
*)
        cat <<EOF
You may supply at least one format on the command line.  Recognized formats
are:
    binaries    for binaries
    source      for source code
The default is both source and binaries.

You may also supply actions.  Recognized actions are:
    extract     read the appropriate files from tape
    fixincludes build a directory of corrected header files for comp-tools 
    test        run a very brief verification of your installation
Default actions are extract, fixincludes, and test, although fixincludes is not
necessary for emacs.

There are two other options:
    -tape=DEVICE   asks Install to read the necessary files from DEVICE. The
                   default DEVICE is ||DEVdflt||, the ||TAPdflt||, cartridge tape
                   drive on most ||HOSTstr||s.
    -installdir=DIRECTORY       asks Install to install files into DIRECTORY.
                                The default DIRECTORY is ${INSTALLDIR_DEFAULT}.
No action has been taken.
EOF
        exit 1
        ;;
esac


###
###
### build a file list
###     (easy this round because we have only one package).
###

FILE_LIST=
TRIGGERS=

for arch in ${ARCH} ; do
        case ${arch} in
        bin)
                FILE_LIST="${FILE_LIST} \
                        ${VERSION}/Install \
                        ${VERSION}/CYGNUS \
                        ${EXECDIR}/lib \
                        ${EXECDIR}/bin \
                        ${VERSION}/include \
                        ${VERSION}/info \
                        ${VERSION}/lib \
                        ${VERSION}/man"
                for tool in ${TOOLS} ; do
                        case ${tool} in
                        comp)   TRIGGERS="${TRIGGERS} ${EXECDIR}/bin/gcc" ;;
                        emacs)  TRIGGERS="${TRIGGERS} ${EXECDIR}/bin/emacs" ;;
                        *)
                                echo '***' Oops.  Sanity failure on triggers for binaries for ${tool}.
                                exit 1
                                ;;
                        esac
                done
                ;;
        src)
                FILE_LIST="${FILE_LIST} \
                        ${VERSION}/Install \
                        ${VERSION}/CYGNUS \
                        ${VERSION}/src"
                for tool in ${TOOLS} ; do
                        case ${tool} in
                        comp)   TRIGGERS="${TRIGGERS} ${VERSION}/src/gcc/gcc.c" ;;
                        emacs)  TRIGGERS="${TRIGGERS} ${VERSION}/src/emacs/src/emacs.c" ;;
                        *)
                                echo '***' Oops.  Sanity failure on triggers for source for ${tool}.
                                exit 1
                                ;;
                        esac
                done
                ;;
        *)
                echo '***' Oops.  Sanity failure on triggers for arch ${arch}.
                ;;
        esac
done

###
###
### removal
###
###

if echo ${ACTIONS} | grep rm > /dev/null 2>&1 ; then
        if [ ! -d "${INSTALLDIR}" ] ; then
                echo '***' Cannot remove anything from \"${INSTALLDIR}\" because it does not exist.
                echo '***   ' You probably do not need to remove anything.
        else
                popdir=`pwd`
                if [ ! -d "${INSTALLDIR}" ] ; then
                        echo '***' Can not cd to \"${INSTALLDIR}\" because it does not exist.
                        echo '***   ' You probably do not need to remove anything.
                        exit 1
                else
                        if [ ! -r "${INSTALLDIR}" ] ; then
                                echo '***' Can not cd to \"${INSTALLDIR}\" because I do not have execute permission.
                                ls -lad ${INSTALLDIR}
                                echo '***   ' Please fix this and then try running Install again.  For
                                echo '***   ' more information, please refer to ${NO_ACCESS}
                                echo '***   ' in ${NOTES}.
                                exit 1
                        fi
                fi

                cd ${INSTALLDIR}

### see also the above note about the timing window.

                if [ "$?" != "0" ] ; then
                        echo '***' Cannot cd to \"${INSTALLDIR}\".  This is a problem.
                        echo '***   ' For further help, please refer to
                        echo '***   ' ${NO_ACCESS} in ${NOTES} or call
                        echo '***   ' ${HOTLINE}
                        exit 1
                else
                        true
                fi

                if [ ! -d "${VERSION}" ] ; then
                        echo '***' Cannot remove anything from \"${INSTALLDIR}/${VERSION}\" because it does not exist.
                        echo '***   ' You probably do not need to remove anything.
                        exit 1
                else
                        true
                fi

                echo Removing from \"${INSTALLDIR}\"...

                if rm -rf ${FILE_LIST} ; then
                        # if neither binaries nor source are installed, remove installdir
                        if [ -d ${INSTALLDIR}/${EXECDIR} \
                                -o -d ${INSTALLDIR}/${VERSION}/src ] ; then
                                true
                        else
                                if rm -rf "${INSTALLDIR}/${VERSION}" ; then
                                        true
                                else
                                        if [ ! -w "${INSTALLDIR}" ] ; then
                                                echo '***' I can not remove ${INSTALLDIR}/${VERSION}
                                                echo '***   ' because I do not have write access to \"${INSTALLDIR}\"
                                                echo '***   ' Please fix this and try running Install again.  For more information
                                                echo '***   ' please refer to ${NO_ACCESS} in ${NOTES}.
                                                exit 1
                                        else
                                                echo '***' I do not know why I can not remove ${INSTALLDIR}/${VERSION}.  This is
                                                echo '***   ' probably not a problem.
                                        fi
                                        exit 1
                                fi
                        fi

                        echo Removed.
                else
                        echo '***' There appears to have been a removal error.
                        echo '***   ' Chances are that this is not a problem, but you might try removing
                        echo '***   ' again.
                        exit 1
                fi
        fi
        echo Cygnus Support software distribution removed!
else
        true
fi # if removing

###
###
### extraction
###
###

if echo ${ACTIONS} | grep extract > /dev/null 2>&1 ; then
        if [ ! -d "${INSTALLDIR}" ] ; then
                echo Trying to create \"${INSTALLDIR}\"...
                if mkdir ${INSTALLDIR} ; then
                        echo Created \"${INSTALLDIR}\".
                else
                        echo '***' I can not make directory, \"${INSTALLDIR}\".

### attempt to diagnose...

                        DIR=`echo ${INSTALLDIR} | ${SED} -e 's:/[^/]*$::'`
                        if [ ! -d "${DIR}" ] ; then
                                echo '***   ' It looks as though \"${DIR}\" does not even exist.
                                exit 1
                        else
                                if [ ! -w "${DIR}" ] ; then
                                        echo '***   ' It looks as though you do not have write access to \"${DIR}\".
                                        echo '***   ' Please fix this and try running Install again.  For more information
                                        echo '***   ' please refer to ${NO_ACCESS} in ${NOTES}.
                                        exit 1
                                else
                                        echo '***   ' I do not know why I can not create \"${INSTALLDIR}\".  This is a problem.
                                        echo '***   ' Please call ${HOTLINE}
                                        exit 1
                                fi  # ! -w ${DIR}
                        fi  # ! -d ${DIR}
                fi  # mkdir ${INSTALLDIR}
        else
                true
        fi  # ! -d ${INSTALLDIR}

        cd ${INSTALLDIR}

        if [ "$?" = "0" ] ; then
                for trigger in ${TRIGGERS} ; do
                        if [ -r "${trigger}" ] ; then
                                echo '***' \"${INSTALLDIR}/${trigger}\" exists and I will not overwrite it.
                                echo '***   ' If you really want to install it again, please remove it first.
                                exit 1
                        else
                                true
                        fi  # -r ${trigger}
                done  # for trigger
        else
                echo '***' I can not cd to \"${INSTALLDIR}\".

### attempt to diagnose...

                if [ ! -r "${INSTALLDIR}" ] ; then
                        echo '***   ' It looks as though you do not have execute permission to \"${INSTALLDIR}\".
                else
                        true
                fi  # ! -r ${INSTALLDIR}

                echo '***   ' For further help, please refer to
                echo '***   ' ${NO_ACCESS} in ${NOTES}.
                exit 1
        fi  # status is zero


### remove redundant names from the list
        echo ${FILE_LIST} ${COMMONS} ${EMACSHIBIN} | tr ' ' '
' | sort | uniq > ${LOGDIR}/extract_list

        echo It will take some time for me to read the tape.
        echo Verbose output will be saved in ${LOGDIR}/tar.log
        echo Extracting into \"${INSTALLDIR}\"... 

### make sure things come off the tape as they were written, but minus what could be a security hole.
        umask 0

### using the no rewind device, so rewind and fsf to be sure.

        if ${MT} -f ${TAPE} rewind > /dev/null 2>&1 ; then
                if ${MT} -f ${TAPE} fsf 1 ; then
                        true
                else
                        echo '***' Could not forward space tape device \"${TAPE}\".
                        exit 1
                fi  
        else
                if test -r ${TAPE} ; then
                        true
                else
                        echo '***' Could not rewind tape device \"${TAPE}\".
                        exit 1
                fi
        fi  # mt ${TAPE} rewind

        if dd if=${TAPE} bs=124b | compress -d | ${TAR} ${TARKEYS} `cat ${LOGDIR}/extract_list` > ${LOGDIR}/tar.log 2>&1 && test -d ${VERSION} ; then
		if [ -d ${INSTALLDIR}/${EXECDIR}/bin ] ; then
			echo Extracted.
		else
			echo '***' The extraction has failed.  The directory
			echo '***' ${INSTALLDIR}/${EXECDIR}/bin was not extracted.
			echo '***   ' The output from the tar command has been logged in ${LOGDIR}/tar.log
			echo '***   ' I do not know how to continue until this problem has been
			echo '***   ' corrected.  If you do not know how to fix it either, please
			echo '***   ' call ${HOTLINE}.
			exit 1
		fi

                if (${MT} -f ${TAPE} rewind > /dev/null 2>&1) ; then
                        true
                else
                        true
                fi  # mt rewind
        else
                echo '***' There appears to have been an extraction error.
                echo '***   ' The output from the tar command has been logged in ${LOGDIR}/tar.log
                echo '***   ' I do not know how to continue until this problem has been
                echo '***   ' corrected.  If you do not know how to fix it either, please
                echo '***   ' call ${HOTLINE}.
                exit 1
        fi  # dd | compress | tar ....

        rm -f ${LOGDIR}/extract_list
        echo Cygnus Support software distribution extracted!
else
        true
fi   # extraction in actions

###
###
### fixincludes
###
###

if echo ${ACTIONS} | grep fix > /dev/null 2>&1 ; then
        echo Running fixincludes for ${INSTALLHOST}.
        echo Verbose output will be stored in ${LOGDIR}/fixincludes.log
        echo This will take some time.
        LIB=${INSTALLDIR}/${EXECDIR}/lib/gcc-lib/||HOSTstr||/||GCCvn||/include ; export LIB

	if mkdir ${LIB}/tmpdir && mv ${LIB}/*.h ${LIB}/tmpdir ; then
		if ${INSTALLDIR}/${VERSION}/lib/fixincludes ${LIB} /usr/include ${INSTALLDIR}/${VERSION}/src/gcc > ${LOGDIR}/fixincludes.log ; then
			mv ${LIB}/tmpdir/* ${LIB} && rmdir ${LIB}/tmpdir 
			echo Finished with fixincludes.
		else
			echo '***' There seems to have been a problem with fixincludes.
			echo '***   ' The verbose output from the fixincludes script has been logged in
			echo '***   ' ${INSTALLDIR}/${VERSION}/fixincludes.log.
			echo '***   ' I do not know how to continue until this problem has been
			echo '***   ' corrected.  If you do not know how to fix it either, please
			echo '***   ' call ${HOTLINE}.
			mv ${LIB}/tmpdir/* ${LIB} && rmdir ${LIB}/tmpdir
			exit 1
		fi  # 
	else
                echo '***' Not able to create the temporary include dir
                echo '***  ' Please ensure that write permissions for
                echo '***  ' ${LIB} are allowed.
                echo '***  ' Or call ${HOTLINE} for more information.
                exit 1
	fi	
        echo Fixed include files installed!
else
        true
fi  # fix in actions

###
###
### testing the installation
###
###

if echo ${ACTIONS} | grep test > /dev/null 2>&1 && echo ${ARCH} | grep bin > /dev/null 2>&1 ; then
	popdir=`pwd`
	cd ${LOGDIR}
        for tool in ${TOOLS} ; do
                case ${tool} in
                  comp)
                        if [ -f ${INSTALLDIR}/${EXECDIR}/bin/gcc ] ; then
                        cat > ${LOGDIR}/hello.c <<'e!o!f'
#include <stdio.h>

extern int printf();

int main(int argc, char **argv) {
        (void) printf("hello: The compilation tools appear to be installed correctly on your %s.\n",
                MACHINE);
        return(0);
} /* main() */
e!o!f
                        if ${INSTALLDIR}/${EXECDIR}/bin/gcc -Wall -O -g \
                                -DMACHINE=\"${INSTALLHOST}\" ${LOGDIR}/hello.c -o ${LOGDIR}/hello ; then
                                if ${LOGDIR}/hello ; then
                                        echo This is good.
                                else
                                        echo '***' Hello.c fails to run.  This is a problem.
                                        echo '***   ' Please call ${HOTLINE}
                                        exit 1
                                fi  # ./hello
                        else
                                echo '***' Hello.c fails to compile.  This is a problem.
                                echo '***   ' Please call ${HOTLINE}
                                exit 1
                        fi  # run gcc

### now check for fixed includes.
                        cat > ${LOGDIR}/test-ioctl.c << 'e!o!f'
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <math.h>

double atof(const char *);

#ifdef __sun__
#include <sys/filio.h>

extern int ioctl();
extern int perror();
#endif /* __sun__ */

extern int printf();

int main(int argc, char **argv) {
#ifdef __sun__
        long l;
        int fd;
        int retval;

        if ((fd = open("/dev/tty", O_RDONLY)) == -1) {
                (void) perror("test-ioctl: can't open /dev/null");
                return(1);
        } else if ((retval = ioctl(fd, FIONREAD, &l)) != 0) {
                (void) perror("test-ioctl: ioctl failed");
                (void) printf("test-ioctl: Most likely, you have not run \"Install fixincludes\" on this machine.\n");
                return(2);
        }
#endif /* __sun__ */

        printf("test-ioctl: Ansi versions of the system header files, (the fixed includes),\n");
        printf("test-ioctl: appear to be installed correctly.\n");

/* that's right.  If closing /dev/tty fails, I don't want to know about it. */

        return(0);
}
e!o!f

                        case "||HOSTstr||" in
                        sun3 | sun4 | decstation)
                                if ${INSTALLDIR}/${EXECDIR}/bin/gcc -Wall -O -g \
                                        -DMACHINE=\"${INSTALLHOST}\" ${LOGDIR}/test-ioctl.c -o ${LOGDIR}/test-ioctl ; then
                                        if ${LOGDIR}/test-ioctl ; then
                                                echo This is good.
                                        else
                                                case "$?" in
                                                1)
                                                        echo '***' test-ioctl.c fails to read /dev/tty.  If you were running Install
                                                        echo '***   ' in batch or from a daemon, please try running it again interactively.
                                                        echo '***   ' If not, please call ${HOTLINE}
                                                        exit 1
                                                        ;;
                                                2)
                                                        echo '***' test-ioctl.c fails to ioctl.
                                                        echo '***   ' Most likely you need to run \"Install fixincludes\".
                                                        echo '***   ' Please run \"Install fixincludes\" and
                                                        echo '***   ' then try this test again.  For an explanation see
                                                        echo '***   ' ${WHY_FIXINCLUDES} in ${NOTES}.
                                                        exit 1
                                                        ;;
                                                *)
                                                        echo '***' test-ioctl.c fails to run.  This is a problem.
                                                        echo '***   ' Please call ${HOTLINE}
                                                        exit 1
                                                        ;;
                                                esac  # $?
                                                exit 1
                                        fi  # test-ioctl
                                else
### this presupposes that hello.c DID compile.
                                        echo '***' test-ioctl.c fails to compile.  This is a problem.
                                        echo '***   ' Please call ${HOTLINE}
                                        exit 1
                                fi  # run gcc
                                ;;
                        iris4)
                                if [ ! -f ${INSTALLDIR}/${EXECDIR}/lib/gcc-lib/||HOSTstr||/||GCCvn||/include/sys/cfeiroute.h ]
                                then
                                        echo '***' You seem to be missing ${INSTALLDIR}/${EXECDIR}/lib/gcc-lib/||HOSTstr||/||GCCvn||/include/sys/cfeiroute.h.
                                        echo '***   ' Most likely you need to run \"Install fixincludes\".
                                        echo '***   ' Please run \"Install fixincludes\" and
                                        echo '***   ' then try this test again.  For an explanation see
                                        echo '***   ' ${WHY_FIXINCLUDES} in ${NOTES}.
                                        exit 1
                                fi  # test fixincluded file
                                ;;
			sparc-sun-solaris2)
                                if [ ! -f ${INSTALLDIR}/${EXECDIR}/lib/gcc-lib/||HOSTstr||/||GCCvn||/include/ieeefp.h ]
                                then
                                        echo '***' You seem to be missing ${INSTALLDIR}/${EXECDIR}/lib/gcc-lib/||HOSTstr||/||GCCvn||/include/ieeefp.h.
                                        echo '***   ' Most likely you need to run \"Install fixincludes\".
                                        echo '***   ' Please run \"Install fixincludes\" and
                                        echo '***   ' then try this test again.  For an explanation see
                                        echo '***   ' ${WHY_FIXINCLUDES} in ${NOTES}.
                                        exit 1
				fi
				;;

                        rs6000)
                                if [ ! -f ${INSTALLDIR}/${EXECDIR}/lib/gcc-lib/||HOSTstr||/||GCCvn||/include/piostruct.h ]
                                then
                                        echo '***' You seem to be missing ${INSTALLDIR}/${EXECDIR}/lib/gcc-lib/||HOSTstr||/||GCCvn||/include/piostruct.h.
                                        echo '***   ' Most likely you need to run \"Install fixincludes\".
                                        echo '***   ' Please run \"Install fixincludes\" and
                                        echo '***   ' then try this test again.  For an explanation see
                                        echo '***   ' ${WHY_FIXINCLUDES} in ${NOTES}.
                                        exit 1
                                fi  # test fixincluded file
                                ;;
                        esac  # ||HOSTstr||
                        else
                                true
                        fi  # test if gcc present

### now check for g++.
                        if [ -f ${INSTALLDIR}/${EXECDIR}/bin/g++ ] ; then
                                cat > ${LOGDIR}/hello.C << 'e!o!f'
#include <iostream.h>

int main(int argc, char**argv)
{
  char *machine = MACHINE;
  cout << "hello: g++ appears to be installed correctly on your "
        << machine << ".\n";
  return(0);
}
e!o!f
                                if ${INSTALLDIR}/${EXECDIR}/bin/gcc ${GPLUSOPTIONS} -Wall -O -g \
                                        -DMACHINE=\"${INSTALLHOST}\" ${LOGDIR}/hello.C -o ${LOGDIR}/Hello -lg++ ; then
                                        if ${LOGDIR}/Hello ; then
                                                echo This is good.
                                        else
                                                echo '***' hello.C fails to run.  This is a problem.
                                                echo '***   ' Please call ${HOTLINE}
                                                exit 1
                                        fi  # ./Hello
                                else
        ### this presupposes that hello.c DID compile.
                                        echo '***' hello.C fails to compile.  This is a problem.
                                        echo '***   ' Please call ${HOTLINE}
                                        exit 1
                                fi  # run g++

        ### now check for static initialization.
                                cat > ${LOGDIR}/static-init.C << 'e!o!f'
#include <iostream.h>
int Three;

struct Foo {
    Foo(int i) { Three = i; }
};

Foo foo(3);

int main(int argc, char**argv)
{
  if (Three != 3) {
        cout << "static-init: static initialization fails.\n";
        return(1);
  }

  cout << "static-init: static initialization appears to work.\n";
  return(0);
}
e!o!f
                                if ${INSTALLDIR}/${EXECDIR}/bin/gcc ${GPLUSOPTIONS} -Wall -O -g \
                                        -DMACHINE=\"${INSTALLHOST}\" ${LOGDIR}/static-init.C -o ${LOGDIR}/static-init -lg++ ; then
                                        if ${LOGDIR}/static-init ; then
                                                echo This is good.
                                        else
                                                echo '***' Static initialization is not working.  This is a problem.
                                                echo '***   ' Please call ${HOTLINE}
                                                exit 1
                                        fi  # run static-init
                                else
        ### this presupposes that it DID compile.
                                        echo '***' static-init.c fails to compile.  This is a problem.
                                        echo '***   ' Please call ${HOTLINE}
                                        exit 1
                                fi  # run g++
                        else # no g++, so don't test it
                                true
                        fi  #  no g++
                        ;;
                emacs)
                        cat > ${LOGDIR}/hello.el <<'e!o!f'
(server-start)
(message "Emacs appears to be installed correctly.")
(kill-emacs 0)
e!o!f
                        if ${INSTALLDIR}/${EXECDIR}/bin/emacs -batch -l ${LOGDIR}/hello.el ; then
                                echo This is good.
                        else
                                echo '***' Emacs fails to run.  This is a problem.
                                echo '***   ' Please call ${HOTLINE}
                                exit 1
                        fi
			;;
		src)  	# if anyone can tell me how to test the installation of source...
			true 
			;;
		*)
			echo '***' I do not know how to test for tool \"${tool}\" because I have never
			echo '***   ' heard of it.  This is a problem.  Please call ${HOTLINE}.
			exit 1
			;;
		esac
	done
	rm -f hello* test-ioctl* static-init* Hello*
	cd ${popdir}
	echo Cygnus Support software distribution tested!
else
	true
fi

echo Done.

exit 0

###
### Local Variables:
### comment-column: 0
### fill-column: 131
### End:
###

### End of Install