diff options
Diffstat (limited to 'sci-physics/geant/geant-4.9.3_p02.ebuild')
-rw-r--r-- | sci-physics/geant/geant-4.9.3_p02.ebuild | 263 |
1 files changed, 0 insertions, 263 deletions
diff --git a/sci-physics/geant/geant-4.9.3_p02.ebuild b/sci-physics/geant/geant-4.9.3_p02.ebuild deleted file mode 100644 index 52b5345..0000000 --- a/sci-physics/geant/geant-4.9.3_p02.ebuild +++ /dev/null @@ -1,263 +0,0 @@ -# Copyright 1999-2010 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sci-physics/geant/Attic/geant-4.9.3_p02.ebuild,v 1.3 2010/11/07 21:06:38 xarthisius dead $ - -EAPI=4 - -inherit eutils versionator toolchain-funcs - -PV1=$(get_version_component_range 1 ${PV}) -PV2=$(get_version_component_range 2 ${PV}) -PV3=$(get_version_component_range 3 ${PV}) -MY_P=${PN}$(replace_version_separator 3 .) - -DESCRIPTION="Toolkit for simulation of passage of particles through matter" -HOMEPAGE="http://geant4.cern.ch/" - -SRC_COM="http://geant4.cern.ch/support/source" -SRC_URI="${SRC_COM}/${MY_P}.tar.gz" -GEANT4_DATA="G4NDL.3.13 - G4EMLOW.6.9 - G4RadioactiveDecay.3.2 - PhotonEvaporation.2.0 - G4ABLA.3.0 - RealSurface.1.0" -for d in ${GEANT4_DATA}; do - SRC_URI="${SRC_URI} data? ( ${SRC_COM}/${d}.tar.gz )" -done - -LICENSE="geant4" -SLOT="4" -KEYWORDS="~amd64 ~hppa ~sparc ~x86" -IUSE="athena +data dawn debug examples gdml geant3 global minimal +motif - +opengl openinventor qt4 +raytracerx static-libs +vrml zlib" - -RDEPEND="<sci-physics/clhep-2.1 - motif? ( >=x11-libs/openmotif-2.3:0 ) - athena? ( x11-libs/libXaw ) - qt4? ( x11-libs/qt-gui:4 ) - openinventor? ( >=media-libs/openinventor-2.1.5.10-r3 ) - raytracerx? ( x11-libs/libX11 x11-libs/libXmu ) - opengl? ( virtual/opengl - athena? ( x11-libs/Xaw3d ) - qt4? ( x11-libs/qt-opengl:4 ) ) - gdml? ( dev-libs/xerces-c ) - geant3? ( sci-physics/geant:3 ) - dawn? ( media-gfx/dawn ) - zlib? ( sys-libs/zlib )" - -DEPEND="${RDEPEND}" - -S="${WORKDIR}/${MY_P}" - -pkg_setup() { - eval unset ${!G4*} -} - -src_prepare() { - # fix bad zlib dependency - epatch "${FILESDIR}"/${PN}-4.9.3-zlib.patch - - # propagate user's flags and compiler settings - sed -i -e 's/-o/$(LDFLAGS) -o/g' source/GNUmakefile || die - sed -i \ - -e '/CXX.*:=.*g++/d' \ - -e '/FC.*:=.*gfortran/d' \ - -e 's/\(CXXFLAGS.*:=\).*/\1 -ansi/' \ - -e '/CXXFLAGS.*+=.*pipe/d' \ - -e "/CXXFLAGS.*=.*-O2/s:=.*:= ${CXXFLAGS}:" \ - -e "/FCFLAGS.*=.*-O2/s:=.*:= ${FCFLAGS}:" \ - -e "/CCFLAGS.*=.*-O2/s:=.*:= ${CFLAGS}:" \ - -e "s:-Wl,-soname:${LDFLAGS} -Wl,-soname:g" \ - -e "s/libq\*/lib\[q,Q\]t*/g" \ - config/sys/Linux*gmk || die "flag substitution failed" - sed -i \ - -e 's:g++:$(CXX):g' \ - config/*.gmk || die "sed for forced g++ failed" - - # fix forced lib directory - sed -i \ - -e 's:$(G4LIB)/$(G4SYSTEM):$(G4LIB):g' \ - config/binmake.gmk || die "sed binmake.gmk failed" - sed -i \ - -e '/$(G4LIB)\/$(G4SYSTEM)/d' \ - config/architecture.gmk || die "sed architecture.gmk failed" - sed -i \ - -e 's:$(G4LIB)/$(G4SYSTEM):$(G4TMP):g' \ - config/common.gmk || die "sed common.gmk failed" - sed -i \ - -e 's:$(G4LIB)/$(G4SYSTEM):$(G4TMP):g' \ - config/moc.gmk || die "sed moc.gmk failed" - sed -i \ - -e 's:$(G4LIB)/$(G4SYSTEM):$(G4TMP):g' \ - -e 's:$(G4BIN)/$(G4SYSTEM):$(G4TMP):g' \ - -e 's:$(G4TMP)/$(G4SYSTEM):$(G4TMP):g' \ - source/GNUmakefile || die "sed GNUmakefile failed" - sed -i \ - -e 's:$(G4LIB)/$(G4SYSTEM):$(G4TMP):g' \ - config/globlib.gmk || die "sed globlib.gmk failed" - - # work around a non defined fortran compiler - use geant3 && export FC=$(tc-getFC) - # don't worry about the g++ name of the file, we remove all specific - export G4SYSTEM=Linux-g++ -} - -src_configure() { - export GEANT4_DIR="/usr/share/${PN}${PV1}" - # where to put compiled libraries; - # we set env var G4LIB in src_install() - # to avoid confusing make - export GEANT4_LIBDIR="/usr/$(get_libdir)" - export G4INSTALL="${S}" - export G4WORKDIR="${S}" - # don't use ${ED} here to preserve a slash after trimming ${D} - # in g4_create_env_script - export G4INCLUDE="${D}/${EPREFIX}/usr/include/${PN}" - export CLHEP_BASE_DIR="${EPREFIX}/usr" - - # parse USE; just set flags of drivers to build, G4*_USE_* vars are set - # later automatically for G4*_BUILD_*_DRIVER - use minimal && export G4UI_NONE=y \ - && export G4VIS_NONE=y - - use motif && export G4UI_BUILD_XM_SESSION=y - use athena && export G4UI_BUILD_XAW_SESSION=y - if use qt4; then - export G4UI_BUILD_QT_SESSION=y - export QTLIBS="-L${EPREFIX}/usr/$(get_libdir)/qt4 -lQtCore -lQtGui" - export QTFLAGS="-I${EPREFIX}/usr/include/qt4 -I${EPREFIX}/usr/include/qt4/Qt" - use opengl && \ - export GLQTLIBS="${QTLIBS} -lQtOpenGL" - #export QTFLAGS="${QTFLAGS} -I${EPREFIX}/usr/include/qt4/QtOpenGL" - fi - use dawn && export G4VIS_BUILD_DAWN_DRIVER=y - use raytracerx && export G4VIS_BUILD_RAYTRACERX_DRIVER=y - use openinventor && export G4VIS_BUILD_OI_DRIVER=y - use opengl && export G4VIS_BUILD_OPENGLX_DRIVER=y - use opengl && use motif && export G4VIS_BUILD_OPENGLXM_DRIVER=y - use gdml && export G4LIB_BUILD_GDML=y - use geant3 && export G4LIB_BUILD_G3TOG4=y - use zlib && export G4LIB_USE_ZLIB=y - use vrml && export G4VIS_BUILD_VRML_DRIVER=y \ - && export G4VIS_BUILD_VRMLFILE_DRIVER=y - use data && export G4DATA="${EPREFIX}/${GEANT4_DIR}/data" - use debug && export G4DEBUG=y || export G4OPTIMIZE=y - - # switch to see compiling flags - export CPPVERBOSE=y - - # if shared libs are built, the script will also build static libs - # with pic flags - # avoid that by building it twice and removing temporary objects - export G4LIB_BUILD_SHARED=y -} - -src_compile() { - cd "${S}/source/" - if use static-libs; then - einfo "Building static libraries" - rm -rf tmp - export G4LIB_BUILD_STATIC=y ; unset G4LIB_BUILD_SHARED - else - einfo "Building shared library" - fi - - if use global; then - einfo "Building global libraries" - emake global - else - emake - fi -} - -g4_create_env_script() { - # we need to change some variables to the final values since we hide these - # from make during the compile - export G4INSTALL="${EPREFIX}/${GEANT4_DIR}" - export G4LIB="${EPREFIX}/${GEANT4_LIBDIR}" - export G4INCLUDE=${G4INCLUDE/${D}/} # EPREFIX remains - export G4WORKDIR=\${HOME}/${PN}${PV1} - - local g4env=99${PN}${PV1} - cat <<-EOF > ${g4env} - LDPATH=${G4LIB} - CLHEP_BASE_DIR=${CLHEP_BASE_DIR} - EOF - - # detailed data file locations - if use data; then - G4LEVELGAMMADATA="${G4DATA}/$(basename ${WORKDIR}/PhotonEvaporation*)" - G4RADIOACTIVEDATA="${G4DATA}/$(basename ${WORKDIR}/RadioactiveDecay*)" - G4LEDATA="${G4DATA}/$(basename ${WORKDIR}/G4EMLOW*)" - G4ABLADATA="${G4DATA}/$(basename ${WORKDIR}/G4ABLA*)" - G4NEUTRONHPDATA="${G4DATA}/$(basename ${WORKDIR}/G4NDL*)" - G4REALSURFACEDATA="${G4DATA}/$(basename ${WORKDIR}/G4REALSURFACEDATA*)" - export G4LEVELGAMMADATA G4RADIOACTIVEDATA G4LEDATA \ - G4ABLADATA G4NEUTRONHPDATA G4REALSURFACEDATA - fi - - # read env variables defined upto now - printenv | grep ^G4 | uniq >> ${g4env} - # define env vars for capabilities we can build into user projects - printenv | uniq | \ - sed -n -e '/^G4/s:BUILD\(.*\)_DRIVER:USE\1:gp' >> ${g4env} - doenvd ${g4env} -} - -src_install() { - # install headers via make since we want them in a single directory - cd "${S}/source/" - einfo "Installing Geant4 headers" - emake includes - cd "${S}" - - # but install libraries and Geant library tool manually - einfo "Installing Geant4 libraries" - insinto ${GEANT4_LIBDIR} - insopts -m0755 - doins tmp/*.so - doins tmp/libname.map - insopts -m0644 - if use static-libs; then - doins tmp/*.a - fi - exeinto ${GEANT4_LIBDIR} - doexe tmp/liblist - - g4_create_env_script - - # configs - insinto ${GEANT4_DIR} - doins -r config - - # install data - if use data; then - einfo "Installing Geant4 data" - insinto "${G4DATA/${EPREFIX}/}" - pushd "${WORKDIR}" > /dev/null - for d in ${GEANT4_DATA}; do - local p=${d/.} - doins -r *${p/G4} - done - popd > /dev/null - fi - - # doc and examples - insinto /usr/share/doc/${PF} - local mypv="${PV1}.${PV2}.${PV3}" - doins ReleaseNotes/ReleaseNotes${mypv}.html - [[ -e ReleaseNotes/Patch${mypv}-1.txt ]] && \ - dodoc ReleaseNotes/Patch${mypv}-*.txt - - use examples && doins -r examples - # TODO: * momo with momo or java flag, and check java stuff -} - -pkg_postinst() { - elog "Geant4 projects are by default build in \$HOME/geant4." - elog "If you want to change, set \$G4WORKDIR to another directory." - - elog "To use Aida you have to explicitly set G4ANALYSIS_USE=y for" - elog "your environment." -} |