diff options
| -rw-r--r-- | net-misc/zebra/files/init.d/bgpd.initd | 42 | ||||
| -rw-r--r-- | net-misc/zebra/files/init.d/ospf6d.initd | 39 | ||||
| -rw-r--r-- | net-misc/zebra/files/init.d/ospfd.initd | 39 | ||||
| -rw-r--r-- | net-misc/zebra/files/init.d/ripd.initd | 40 | ||||
| -rw-r--r-- | net-misc/zebra/files/init.d/ripngd.initd | 41 | ||||
| -rw-r--r-- | net-misc/zebra/files/init.d/zebra.initd | 42 |
6 files changed, 243 insertions, 0 deletions
diff --git a/net-misc/zebra/files/init.d/bgpd.initd b/net-misc/zebra/files/init.d/bgpd.initd new file mode 100644 index 000000000000..59e012687d03 --- /dev/null +++ b/net-misc/zebra/files/init.d/bgpd.initd @@ -0,0 +1,42 @@ +#!/sbin/runscript +# Copyright 1999-2003 Gentoo Technologies, Inc. +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/net-misc/zebra/files/init.d/bgpd.initd,v 1.1 2003/05/31 19:57:55 solar Exp $ + + +opts="depend checkconfig stop start" + +depend() { + need net zebra +} + +checkconfig() { + if [ ! -e /etc/zebra/zebra.conf ]; then + eerror "You need to create /etc/zebra/bgpd.conf first." + eerror "An example can be found in /etc/zebra/sample/bgpd.conf.sample" + return 1 + fi +} + +stop() { + ebegin "Stopping bgpd" + start-stop-daemon --stop --quiet --pidfile /var/run/bgpd.pid + result=$? + eend $result +} + +start() { + local myopts="--daemon" + + [ -n "${BGPD_CONFIG_FILE}" ] && myopts="${myopts} --config_file ${BGPD_CONFIG_FILE}" + [ -n "${BGPD_BGP_PORT}" ] && [ "${BGPD_BGP_PORT}" -ge 0 ] && myopts="${myopts} --bgp_port ${BGPD_BGP_PORT}" + [ -n "${BGPD_VTY_ADDR}" ] && myopts="${myopts} --vty_addr ${BGPD_VTY_ADDR}" + [ -n "${BGPD_VTY_PORT}" ] && [ "${BGPD_VTY_PORT}" -ge 0 ] && myopts="${myopts} --vty_port ${BGPD_VTY_PORT}" + [ "x${BGPD_RETAIN}" == "xyes" ] && myopts="${myopts} --retain" + [ "x${BGPD_NO_KERNEL}" == "xyes" ] && myopts="${myopts} --keep_kernel" + + ebegin "Starting bgpd" + start-stop-daemon --start --quiet --exec /usr/sbin/bgpd -- ${myopts} + result=$? + eend $result +} diff --git a/net-misc/zebra/files/init.d/ospf6d.initd b/net-misc/zebra/files/init.d/ospf6d.initd new file mode 100644 index 000000000000..c16f8550ce2c --- /dev/null +++ b/net-misc/zebra/files/init.d/ospf6d.initd @@ -0,0 +1,39 @@ +#!/sbin/runscript +# Copyright 1999-2003 Gentoo Technologies, Inc. +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/net-misc/zebra/files/init.d/ospf6d.initd,v 1.1 2003/05/31 19:57:55 solar Exp $ + + +opts="depend checkconfig stop start" + +depend() { + need net zebra +} + +checkconfig() { + if [ ! -e /etc/zebra/zebra.conf ]; then + eerror "You need to create /etc/zebra/ospf6d.conf first." + eerror "An example can be found in /etc/zebra/sample/ospf6d.conf.sample" + return 1 + fi +} + +stop() { + ebegin "Stopping ospf6d" + start-stop-daemon --stop --quiet --pidfile /var/run/ospf6d.pid + result=$? + eend $result +} + +start() { + local myopts="--daemon" + + [ -n "${OSPF6D_CONFIG_FILE}" ] && myopts="${myopts} --config_file ${OSPF6D_CONFIG_FILE}" + [ -n "${OSPF6D_VTY_ADDR}" ] && myopts="${myopts} --vty_addr ${OSPF6D_VTY_ADDR}" + [ -n "${OSPF6D_VTY_PORT}" ] && [ "${OSPF6D_VTY_PORT}" -ge 0 ] && myopts="${myopts} --vty_port ${OSPF6D_VTY_PORT}" + + ebegin "Starting ospf6d" + start-stop-daemon --start --quiet --exec /usr/sbin/ospf6d -- ${myopts} + result=$? + eend $result +} diff --git a/net-misc/zebra/files/init.d/ospfd.initd b/net-misc/zebra/files/init.d/ospfd.initd new file mode 100644 index 000000000000..08b3a88fc93c --- /dev/null +++ b/net-misc/zebra/files/init.d/ospfd.initd @@ -0,0 +1,39 @@ +#!/sbin/runscript +# Copyright 1999-2003 Gentoo Technologies, Inc. +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/net-misc/zebra/files/init.d/ospfd.initd,v 1.1 2003/05/31 19:57:55 solar Exp $ + + +opts="depend checkconfig stop start" + +depend() { + need net zebra +} + +checkconfig() { + if [ ! -e /etc/zebra/zebra.conf ]; then + eerror "You need to create /etc/zebra/ospfd.conf first." + eerror "An example can be found in /etc/zebra/sample/ospfd.conf.sample" + return 1 + fi +} + +stop() { + ebegin "Stopping ospfd" + start-stop-daemon --stop --quiet --pidfile /var/run/ospfd.pid + result=$? + eend $result +} + +start() { + local myopts="--daemon" + + [ -n "${OSPFD_CONFIG_FILE}" ] && myopts="${myopts} --config_file ${OSPFD_CONFIG_FILE}" + [ -n "${OSPFD_VTY_ADDR}" ] && myopts="${myopts} --vty_addr ${OSPFD_VTY_ADDR}" + [ -n "${OSPFD_VTY_PORT}" ] && [ "${OSPFD_VTY_PORT}" -ge 0 ] && myopts="${myopts} --vty_port ${OSPFD_VTY_PORT}" + + ebegin "Starting ospfd" + start-stop-daemon --start --quiet --exec /usr/sbin/ospfd -- ${myopts} + result=$? + eend $result +} diff --git a/net-misc/zebra/files/init.d/ripd.initd b/net-misc/zebra/files/init.d/ripd.initd new file mode 100644 index 000000000000..c0a212a4219e --- /dev/null +++ b/net-misc/zebra/files/init.d/ripd.initd @@ -0,0 +1,40 @@ +#!/sbin/runscript +# Copyright 1999-2003 Gentoo Technologies, Inc. +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/net-misc/zebra/files/init.d/ripd.initd,v 1.1 2003/05/31 19:57:55 solar Exp $ + + +opts="depend checkconfig stop start" + +depend() { + need net zebra +} + +checkconfig() { + if [ ! -e /etc/zebra/zebra.conf ]; then + eerror "You need to create /etc/zebra/ripd.conf first." + eerror "An example can be found in /etc/zebra/sample/ripd.conf.sample" + return 1 + fi +} + +stop() { + ebegin "Stopping ripd" + start-stop-daemon --stop --quiet --pidfile /var/run/ripd.pid + result=$? + eend $result +} + +start() { + local myopts="--daemon" + + [ -n "${RIPD_CONFIG_FILE}" ] && myopts="${myopts} --config_file ${RIPD_CONFIG_FILE}" + [ -n "${RIPD_VTY_ADDR}" ] && myopts="${myopts} --vty_addr ${RIPD_VTY_ADDR}" + [ -n "${RIPD_VTY_PORT}" ] && [ "${RIPD_VTY_PORT}" -ge 0 ] && myopts="${myopts} --vty_port ${RIPD_VTY_PORT}" + [ "x${RIPD_RETAIN}" == "xyes" ] && myopts="${myopts} --retain" + + ebegin "Starting ripd" + start-stop-daemon --start --quiet --exec /usr/sbin/ripd -- ${myopts} + result=$? + eend $result +} diff --git a/net-misc/zebra/files/init.d/ripngd.initd b/net-misc/zebra/files/init.d/ripngd.initd new file mode 100644 index 000000000000..b5004639705b --- /dev/null +++ b/net-misc/zebra/files/init.d/ripngd.initd @@ -0,0 +1,41 @@ +#!/sbin/runscript +# Copyright 1999-2003 Gentoo Technologies, Inc. +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/net-misc/zebra/files/init.d/ripngd.initd,v 1.1 2003/05/31 19:57:55 solar Exp $ + + +opts="depend checkconfig stop start" + +depend() { + need net zebra +} + +checkconfig() { + if [ ! -e /etc/zebra/zebra.conf ]; then + eerror "You need to create /etc/zebra/ripngd.conf first." + eerror "An example can be found in /etc/zebra/sample/ripngd.conf.sample" + return 1 + fi +} + +stop() { + ebegin "Stopping ripngd" + start-stop-daemon --stop --quiet --pidfile /var/run/ripngd.pid + result=$? + eend $result +} + +start() { + local myopts="--daemon" + + [ -n "${RIPNGD_CONFIG_FILE}" ] && myopts="${myopts} --config_file ${RIPNGD_CONFIG_FILE}" + [ -n "${RIPNGD_LOG_MODE}" ] && [ "${RIPNGD_LOG_MODE}" -ge 0 ] && myopts="${myopts} --log_mode ${RIPNGD_LOG_MODE}" + [ -n "${RIPNGD_VTY_ADDR}" ] && myopts="${myopts} --vty_addr ${RIPNGD_VTY_ADDR}" + [ -n "${RIPNGD_VTY_PORT}" ] && [ "${RIPNGD_VTY_PORT}" -ge 0 ] && myopts="${myopts} --vty_port ${RIPNGD_VTY_PORT}" + [ "x${RIPNGD_RETAIN}" == "xyes" ] && myopts="${myopts} --retain" + + ebegin "Starting ripngd" + start-stop-daemon --start --quiet --exec /usr/sbin/ripngd -- ${myopts} + result=$? + eend $result +} diff --git a/net-misc/zebra/files/init.d/zebra.initd b/net-misc/zebra/files/init.d/zebra.initd new file mode 100644 index 000000000000..927847c30f8c --- /dev/null +++ b/net-misc/zebra/files/init.d/zebra.initd @@ -0,0 +1,42 @@ +#!/sbin/runscript +# Copyright 1999-2003 Gentoo Technologies, Inc. +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/net-misc/zebra/files/init.d/zebra.initd,v 1.1 2003/05/31 19:57:55 solar Exp $ + + +opts="depend checkconfig stop start" + +depend() { + need net +} + +checkconfig() { + if [ ! -e /etc/zebra/zebra.conf ]; then + eerror "You need to create /etc/zebra/zebra.conf first." + eerror "An example can be found in /etc/zebra/sample/zebra.conf.sample" + return 1 + fi +} + +stop() { + ebegin "Stopping zebra" + start-stop-daemon --stop --quiet --pidfile /var/run/zebra.pid + result=$? + eend $result +} + +start() { + local myopts="--daemon" + + [ -n "${ZEBRA_CONFIG_FILE}" ] && myopts="${myopts} --config_file ${ZEBRA_CONFIG_FILE}" + [ "x${ZEBRA_KEEP_KERNEL}" == "xyes" ] && myopts="${myopts} --keep_kernel" + [ -n "${ZEBRA_LOG_MODE}" ] && [ "${ZEBRA_LOG_MODE}" -ge 0 ] && myopts="${myopts} --log_mode ${ZEBRA_LOG_MODE}" + [ -n "${ZEBRA_VTY_ADDR}" ] && myopts="${myopts} --vty_addr ${ZEBRA_VTY_ADDR}" + [ -n "${ZEBRA_VTY_PORT}" ] && [ "${ZEBRA_VTY_PORT}" -ge 0 ] && myopts="${myopts} --vty_port ${ZEBRA_VTY_PORT}" + [ "x${ZEBRA_RETAIN}" == "xyes" ] && myopts="${myopts} --retain" + + ebegin "Starting zebra" + start-stop-daemon --start --quiet --exec /usr/sbin/zebra -- ${myopts} + result=$? + eend $result +} |