Fix path issues, bug #140668.

(Portage version: 2.1.1_pre3)

4 files changed, 638 insertions, 1 deletions

diff --git a/sys-fs/udev/ChangeLog b/sys-fs/udev/ChangeLog
index 921854911bdf..b5da2e1680e3 100644
--- a/sys-fs/udev/ChangeLog
+++ b/sys-fs/udev/ChangeLog
@@ -1,6 +1,12 @@
 # ChangeLog for sys-fs/udev
 # Copyright 1999-2006 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/sys-fs/udev/ChangeLog,v 1.206 2006/07/15 17:16:52 azarah Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/udev/ChangeLog,v 1.207 2006/07/17 08:36:43 azarah Exp $
+
+*udev-096-r1 (17 Jul 2006)
+
+  17 Jul 2006; Martin Schlemmer <azarah@gentoo.org>
+  +files/udev.rules-096-r1, +udev-096-r1.ebuild:
+  Fix path issues, bug #140668.
 
 *udev-096 (15 Jul 2006)
 
diff --git a/sys-fs/udev/files/digest-udev-096-r1 b/sys-fs/udev/files/digest-udev-096-r1
new file mode 100644
index 000000000000..7068d6b78f90
--- /dev/null
+++ b/sys-fs/udev/files/digest-udev-096-r1
@@ -0,0 +1,3 @@
+MD5 f4effef7807ce1dc91ab581686ef197b udev-096.tar.bz2 194109
+RMD160 93aa8ef19160434d96800a7890af120e3b66a833 udev-096.tar.bz2 194109
+SHA256 a6e08ce1a29adf2fff0ee198a632f13d867929afd10a726829bc75b52afa453b udev-096.tar.bz2 194109
diff --git a/sys-fs/udev/files/udev.rules-096-r1 b/sys-fs/udev/files/udev.rules-096-r1
new file mode 100644
index 000000000000..e1ff2ef31f0d
--- /dev/null
+++ b/sys-fs/udev/files/udev.rules-096-r1
@@ -0,0 +1,334 @@
+# /etc/udev/rules/50-udev.rules:  device naming rules for udev
+#
+# Gentoo specific rules
+#
+# There are a number of modifiers that are allowed to be used in some of the
+# fields.  See the udev man page for a full description of them.
+#
+# Try not to modify this file, if you wish to change things, create a new rule
+# file that can be run before this one.
+#
+
+
+# console
+KERNEL=="pty[pqrstuvwxyzabcdef][0123456789abcdef]", NAME="%k", GROUP="tty",	OPTIONS="last_rule"
+KERNEL=="tty[pqrstuvwxyzabcdef][0123456789abcdef]", NAME="%k", GROUP="tty",	OPTIONS="last_rule"
+KERNEL=="vcs*",                 NAME="%k", GROUP="tty",			OPTIONS="last_rule"
+KERNEL=="vcsa*",                NAME="%k", GROUP="tty",			OPTIONS="last_rule"
+KERNEL=="tty",                  NAME="%k", GROUP="tty", MODE="0666",	OPTIONS="last_rule"
+KERNEL=="tty[0-9]",             NAME="%k", GROUP="tty",			OPTIONS="last_rule"
+KERNEL=="tty[0-9][0-9]",        NAME="%k", GROUP="tty",			OPTIONS="last_rule"
+KERNEL=="console",		NAME="%k", GROUP="tty", MODE="0600"
+KERNEL=="ptmx",			NAME="%k", GROUP="tty", MODE="0666"
+
+# tty devices
+KERNEL=="ttyS[0-9]*",	NAME="%k", SYMLINK="tts/%n", GROUP="tty"
+KERNEL=="ttyUSB[0-9]*",	NAME="%k", SYMLINK="tts/USB%n", GROUP="tty", MODE="0660"
+KERNEL=="ippp0",	NAME="%k", GROUP="tty"
+KERNEL=="isdn*"		NAME="%k", GROUP="tty"
+KERNEL=="dcbri*",	NAME="%k", GROUP="tty"
+KERNEL=="ircomm*",	NAME="%k", GROUP="tty"
+
+# all block devices
+SUBSYSTEM=="block", GROUP="disk"
+
+# cdrom symlinks and other good cdrom naming
+BUS=="ide",	KERNEL=="hd[a-z]", ACTION=="add", IMPORT="cdrom_id --export $tempnode"
+BUS=="scsi",	KERNEL=="sr[0-9]*", ACTION=="add", IMPORT="cdrom_id --export $tempnode"
+BUS=="scsi",	KERNEL=="scd[a-z]", ACTION=="add", IMPORT="cdrom_id --export $tempnode"
+BUS=="scsi",	KERNEL=="sg[0-9]*", ACTION=="add", DRIVER=="sr", GROUP="cdrom"
+ENV{ID_CDROM}=="?*",		PROGRAM="seq_node.sh %r %k cdrom", SYMLINK+="%c", GROUP="cdrom"
+ENV{ID_CDROM_CD_RW}=="?*",	PROGRAM="seq_node.sh %r %k cdrw",  SYMLINK+="%c"
+ENV{ID_CDROM_DVD}=="?*",	PROGRAM="seq_node.sh %r %k dvd",   SYMLINK+="%c"
+ENV{ID_CDROM_DVD_R}=="?*",	PROGRAM="seq_node.sh %r %k dvdrw", SYMLINK+="%c"
+
+# disk devices
+KERNEL=="sd*",		NAME="%k", GROUP="disk"
+KERNEL=="dasd*",	NAME="%k", GROUP="disk"
+KERNEL=="ataraid*",	NAME="%k", GROUP="disk"
+
+# compaq smart array
+KERNEL=="cciss*",	NAME="%k"
+KERNEL=="ida*",		NAME="%k"
+
+# mylex
+KERNEL=="rd*",		NAME="%k"
+
+# dri devices
+KERNEL=="card*",	NAME="dri/card%n", GROUP="video"
+KERNEL=="nvidia*",	NAME="%k", GROUP="video"
+KERNEL=="3dfx*",	NAME="%k", GROUP="video"
+
+# alsa devices
+SUBSYSTEM=="sound", GROUP="audio"
+KERNEL=="controlC[0-9]*",	NAME="snd/%k"
+KERNEL=="hw[CD0-9]*",		NAME="snd/%k"
+KERNEL=="pcm[CD0-9cp]*",	NAME="snd/%k"
+KERNEL=="midiC[D0-9]*",		NAME="snd/%k"
+KERNEL=="timer",		NAME="snd/%k"
+KERNEL=="seq",			NAME="snd/%k"
+
+# capi devices
+KERNEL=="capi",		NAME="capi20", SYMLINK+="isdn/capi20", GROUP="dialout"
+KERNEL=="capi*",	NAME="capi/%n", GROUP="dialout"
+
+# cpu devices
+KERNEL=="cpu[0-9]*",	NAME="cpu/%n/cpuid"
+KERNEL=="msr[0-9]*",	NAME="cpu/%n/msr"
+KERNEL=="microcode",	NAME="cpu/microcode"
+
+# dm devices (ignore them)
+KERNEL=="dm-[0-9]*",	OPTIONS="ignore_device"
+# create a symlink named after the device map name
+# note devmap_name comes with extras/multipath
+#KERNEL=="dm-[0-9]*",	PROGRAM="/sbin/devmap_name %M %m", NAME="%k", SYMLINK+="%c"
+KERNEL=="device-mapper",	NAME="mapper/control"
+
+# fb devices
+KERNEL=="fb[0-9]*",	NAME="fb/%n", SYMLINK+="%k", GROUP="video"
+
+# floppy devices
+KERNEL=="fd[0-9]*",	NAME="floppy/%n", SYMLINK+="%k", GROUP="floppy"
+
+# i2c devices
+KERNEL=="i2c-[0-9]*",	NAME="i2c/%n", SYMLINK+="%k"
+
+# input devices
+KERNEL=="mice",		NAME="input/%k", MODE="0644"
+KERNEL=="mouse*",	NAME="input/%k", MODE="0644"
+KERNEL=="event*",	NAME="input/%k", MODE="0600"
+KERNEL=="js*",		NAME="input/%k", MODE="664"
+KERNEL=="ts*",		NAME="input/%k", MODE="0600"
+
+# loop devices
+KERNEL=="loop[0-9]*",	NAME="loop/%n", SYMLINK+="%k", GROUP="disk"
+
+# md block devices
+KERNEL=="md[0-9]*",	NAME="md/%n", SYMLINK+="%k", GROUP="disk"
+
+# aoe char devices,
+SUBSYSTEM=="aoe", KERNEL=="discover",	NAME="etherd/%k", GROUP="disk", MODE="0220"
+SUBSYSTEM=="aoe", KERNEL=="err",	NAME="etherd/%k", GROUP="disk", MODE="0440"
+SUBSYSTEM=="aoe", KERNEL=="interfaces",	NAME="etherd/%k", GROUP="disk", MODE="0220"
+
+# misc devices
+KERNEL=="agpgart",	NAME="misc/%k", SYMLINK+="%k"
+KERNEL=="psaux",	NAME="misc/%k", SYMLINK+="%k"
+KERNEL=="rtc",		NAME="misc/%k", SYMLINK+="%k", MODE="0664"
+KERNEL=="uinput",	NAME="misc/%k", SYMLINK+="%k"
+KERNEL=="inotify",	NAME="misc/%k", SYMLINK+="%k", MODE="0666"
+
+# netlink devices
+KERNEL=="route",	NAME="netlink/%k"
+KERNEL=="skip",		NAME="netlink/%k"
+KERNEL=="usersock",	NAME="netlink/%k"
+KERNEL=="fwmonitor",	NAME="netlink/%k"
+KERNEL=="tcpdiag",	NAME="netlink/%k"
+KERNEL=="nflog",	NAME="netlink/%k"
+KERNEL=="xfrm",		NAME="netlink/%k"
+KERNEL=="arpd",		NAME="netlink/%k"
+KERNEL=="route6",	NAME="netlink/%k"
+KERNEL=="ip6_fw",	NAME="netlink/%k"
+KERNEL=="dnrtmsg",	NAME="netlink/%k"
+KERNEL=="tap*",		NAME="netlink/%k"
+
+# network devices
+KERNEL=="tun",		NAME="net/%k",	MODE="0600"
+
+# ramdisk devices
+KERNEL=="ram[0-9]*",	NAME="rd/%n", SYMLINK+="%k"
+
+# IEEE1394 (firewire) devices (must be before raw devices below)
+KERNEL=="raw1394",	NAME="%k",		GROUP="video"
+KERNEL=="dv1394*",	NAME="dv1394/%n",	GROUP="video"
+KERNEL=="video1394*",	NAME="video1394/%n",	GROUP="video"
+
+# raw devices
+KERNEL=="raw[0-9]*",	NAME="raw/%k", GROUP="disk"
+KERNEL=="ram*",		NAME="%k", GROUP="disk"
+
+# sound devices
+KERNEL=="adsp",			NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="adsp[0-9]*",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="audio",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="audio[0-9]*",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="dsp",			NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="dsp[0-9]*",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="mixer",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="mixer[0-9]*",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="sequencer",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="sequencer[0-9]*",	NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+
+# memory devices
+KERNEL=="random",	NAME="%k", MODE="0666"
+KERNEL=="urandom",	NAME="%k", MODE="0444"
+KERNEL=="mem",		NAME="%k", MODE="0640"
+KERNEL=="kmem",		NAME="%k", MODE="0640"
+KERNEL=="port",		NAME="%k", MODE="0640"
+KERNEL=="full",		NAME="%k", MODE="0666"
+KERNEL=="null",		NAME="%k", MODE="0666"
+KERNEL=="zero",		NAME="%k", MODE="0666"
+
+# usb devices
+KERNEL=="hiddev*",		NAME="usb/%k"
+KERNEL=="auer*",		NAME="usb/%k"
+KERNEL=="legousbtower*",	NAME="usb/%k", GROUP="usb"
+KERNEL=="dabusb*",		NAME="usb/%k"
+BUS=="usb", KERNEL=="lp[0-9]*",	NAME="usb/%k", GROUP="lp"
+
+# v4l devices
+KERNEL=="video[0-9]*",	NAME="v4l/video%n", SYMLINK+="video%n", GROUP="video"
+KERNEL=="radio[0-9]*",	NAME="v4l/radio%n", SYMLINK+="radio%n", GROUP="video"
+KERNEL=="vbi[0-9]*",	NAME="v4l/vbi%n", SYMLINK+="vbi%n", GROUP="video"
+KERNEL=="vtx[0-9]*",	NAME="v4l/vtx%n", GROUP="video"
+
+# dvb devices
+SUBSYSTEM=="dvb", PROGRAM="/bin/sh -c 'K=%k; K=$${K#dvb}; printf dvb/adapter%%i/%%s $${K%%%%.*} $${K#*.}'", NAME="%c", GROUP="video"
+
+# Asterisk Zaptel devices
+KERNEL=="zapctl",	NAME="zap/ctl"
+KERNEL=="zaptimer",	NAME="zap/timer"
+KERNEL=="zapchannel",	NAME="zap/channel"
+KERNEL=="zappseudo",	NAME="zap/pseudo"
+KERNEL=="zap[0-9]*",	NAME="zap/%n"
+
+# pilot/palm devices
+KERNEL=="pilot",	NAME="%k", GROUP="uucp"
+
+# jaz devices
+KERNEL=="jaz*",		NAME="%k", GROUP="disk"
+
+# zip devices
+KERNEL=="pocketzip*",	NAME="%k", GROUP="disk"
+KERNEL=="zip*",		NAME="%k", GROUP="disk"
+
+# ls120 devices
+KERNEL=="ls120",	NAME="%k", GROUP="disk"
+
+# lp devices
+KERNEL=="lp*",		NAME="%k", GROUP="lp"
+KERNEL=="irlpt",	NAME="%k", GROUP="lp"
+KERNEL=="usblp",	NAME="%k", GROUP="lp"
+KERNEL=="lp*",		NAME="%k", GROUP="lp"
+KERNEL=="parport*",	NAME="%k", GROUP="lp"
+
+# tape devices
+KERNEL=="ht*",		NAME="%k", GROUP="tape"
+KERNEL=="nht*",		NAME="%k", GROUP="tape"
+KERNEL=="pt*",		NAME="%k", GROUP="tape"
+KERNEL=="npt*",		NAME="%k", GROUP="tape"
+KERNEL=="st*",		NAME="%k", GROUP="tape"
+KERNEL=="nst*",		NAME="%k", GROUP="tape"
+KERNEL=="osst*",	NAME="%k", GROUP="tape"
+KERNEL=="nosst*",	NAME="%k", GROUP="tape"
+
+# diskonkey devices
+KERNEL=="diskonkey*",	NAME="%k", GROUP="disk"
+
+# rem_ide devices
+KERNEL=="microdrive*",	NAME="%k", GROUP="disk"
+
+# kbd devices
+KERNEL=="kbd",		NAME="%k", MODE="0664"
+
+# Sony Vaio Jogdial sonypi device
+KERNEL=="sonypi",	NAME="%k", MODE="0666"
+
+# packet devices
+KERNEL=="pktcdvd",		NAME="pktcdvd/control", GROUP="cdrw", MODE="0660"
+KERNEL=="pktcdvd[0-9]*",	NAME="pktcdvd/pktcdvd%n", GROUP="cdrw", MODE="0660"
+
+# infiniband devices
+KERNEL=="umad*",	NAME="infiniband/%k"
+KERNEL=="issm*",	NAME="infiniband/%k"
+
+# tpm devices
+KERNEL=="tpm*",	NAME="%k", OWNER="tss", GROUP="tss", MODE="0600"
+
+#######################################
+# Persistant block device stuff - begin
+#######################################
+
+# Skip all of this if we are not adding a block device
+ACTION!="add",		GOTO="persistent_end"
+SUBSYSTEM!="block",	GOTO="persistent_end"
+KERNEL=="ram*|loop*|fd*|nbd*",	GOTO="persistent_end"
+
+# skip accessing removable ide devices, cause the ide drivers are horrible broken
+BUS=="ide", SYSFS{removable}=="1", GOTO="no_volume_id"
+BUS=="ide", SYSFS{../removable}=="1", GOTO="no_volume_id"
+
+# persistent disk device links /dev/disk/
+KERNEL=="hd*[!0-9]", IMPORT="ata_id --export $tempnode"
+KERNEL=="hd*[!0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/ata-$env{ID_MODEL}_$env{ID_SERIAL}"
+KERNEL=="hd*[0-9]", IMPORT{parent}=="ID_*", SYMLINK+="disk/by-id/ata-$env{ID_MODEL}_$env{ID_SERIAL}-part%n"
+
+KERNEL=="sd*[!0-9]", SYSFS{ieee1394_id}=="*", IMPORT="/bin/echo -e 'ID_SERIAL=$sysfs{ieee1394_id}\nID_BUS=ieee1394'"
+KERNEL=="sd*[!0-9]", ENV{ID_SERIAL}=="", IMPORT="usb_id -x"
+KERNEL=="sd*[!0-9]", ENV{ID_SERIAL}=="", IMPORT="scsi_id -g -x -s %p -d %N"
+KERNEL=="sd*[!0-9]", ENV{ID_SERIAL}=="", IMPORT="scsi_id -g -x -a -s %p -d %N"
+KERNEL=="sd*[!0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
+KERNEL=="sd*[0-9]", IMPORT{parent}=="ID_*"
+KERNEL=="sd*[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}-part%n"
+
+# Skip id for ram / loop / fd
+KERNEL=="ram*", GOTO="no_volume_id"
+KERNEL=="loop*", GOTO="no_volume_id"
+KERNEL=="fd*", GOTO="no_volume_id"
+
+KERNEL=="*[!0-9]", ENV{ID_TYPE}=="?*", IMPORT="path_id %p", SYMLINK+="disk/by-path/$env{ID_PATH}"
+KERNEL=="*[0-9]", IMPORT{parent}=="ID_*"
+KERNEL=="*[0-9]", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-part%n"
+
+# volume-label/uuid
+KERNEL=="*[!0-9]", SYSFS{removable}=="1", GOTO="no_volume_id"
+KERNEL=="sr*", GOTO="no_volume_id"
+KERNEL=="*[0-9]", IMPORT="vol_id --export $tempnode"
+KERNEL=="*[0-9]", ENV{ID_FS_UUID}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID}"
+KERNEL=="*[0-9]", ENV{ID_FS_LABEL_SAFE}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_SAFE}"
+LABEL="no_volume_id"
+
+LABEL="persistent_end"
+
+#####################################
+# Persistant block device stuff - end
+#####################################
+
+# usbfs-like device nodes
+SUBSYSTEM=="usb_device", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev}; printf bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", NAME="%c", MODE="0644"
+
+
+# Module autoloading
+
+# Autoload modules that lack aliases but have them defined inutoload modules
+SYSFS{modalias}=="?*", ACTION=="add", RUN+="/sbin/modprobe $env{MODALIAS}"
+
+# /etc/modprobe.conf.
+SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", RUN+="/bin/sh -c 'while read id; do /sbin/modprobe pnp:d$$id; done < /sys$devpath/id'"
+# If you have problems with some pnp modules being loaded, please enter the
+# following aliases into the modprobe configuration files.  These are needed by
+# udev to autoload some modules
+# alias pnp:dPNP0510 irtty-sir
+# alias pnp:dPNP0511 irtty-sir
+# alias pnp:dPNP0700 floppy
+# alias pnp:dPNP0800 pcspkr
+# alias pnp:dPNP0b00 rtc
+# alias pnp:dPNP0303 atkbd
+# alias pnp:dPNP0f13 psmouse
+# alias pnp:dPNPb02f analog
+
+
+
+# Load firmware
+SUBSYSTEM=="firmware", ACTION=="add", RUN+="firmware.sh"
+
+
+# be backward compatible for a while with the /etc/dev.d and /etc/hotplug.d/ systems
+# run /etc/hotplug.d/ stuff only if we came from a hotplug event, not for udevstart
+ENV{UDEVD_EVENT}=="1", RUN+="udev_run_hotplugd $env{SUBSYSTEM}"
+
+# always run /etc/dev.d/ stuff for now.
+RUN+="udev_run_devd $env{SUBSYSTEM}"
+
+# debugging monitor
+RUN+="socket:/org/kernel/udev/monitor"
diff --git a/sys-fs/udev/udev-096-r1.ebuild b/sys-fs/udev/udev-096-r1.ebuild
new file mode 100644
index 000000000000..7ab4a4367582
--- /dev/null
+++ b/sys-fs/udev/udev-096-r1.ebuild
@@ -0,0 +1,294 @@
+# Copyright 1999-2006 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/udev/udev-096-r1.ebuild,v 1.1 2006/07/17 08:36:43 azarah Exp $
+
+inherit eutils flag-o-matic
+
+DESCRIPTION="Linux dynamic and persistent device naming support (aka userspace devfs)"
+HOMEPAGE="http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html"
+SRC_URI="mirror://kernel/linux/utils/kernel/hotplug/${P}.tar.bz2"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86"
+IUSE="selinux"
+
+# still rely on hotplug (need to fix that), but now we implement coldplug
+
+DEPEND="sys-apps/hotplug-base"
+RDEPEND="!sys-apps/coldplug"
+RDEPEND="${DEPEND} ${RDEPEND}
+	>=sys-apps/baselayout-1.11.14"
+# We need the lib/rcscripts/addon support
+PROVIDE="virtual/dev-manager"
+
+src_unpack() {
+	unpack ${A}
+
+	cd "${S}"
+
+	# patches go here...
+	#epatch ${FILESDIR}/${P}-udev_volume_id.patch
+	# Add --no-scan-{block,bus,class} options to udevtrigger, bug #119989
+	epatch ${FILESDIR}/${P}-udevtrigger.patch
+
+	# No need to clutter the logs ...
+	sed -ie '/^DEBUG/ c\DEBUG = false' Makefile
+	# Do not use optimization flags from the package
+	sed -ie 's|$(OPTIMIZATION)||g' Makefile
+
+	# Make sure there is no sudden changes to udev.rules.gentoo
+	# (more for my own needs than anything else ...)
+	MD5=`md5sum < "${S}/etc/udev/gentoo/udev.rules"`
+	MD5=${MD5/  -/}
+	if [ "${MD5}" != "590d3e6346938e3b608237973f4f1805" ]
+	then
+		echo
+		eerror "gentoo/udev.rules has been updated, please validate!"
+		die "gentoo/udev.rules has been updated, please validate!"
+	fi
+}
+
+src_compile() {
+	filter-flags -fprefetch-loop-arrays
+	local myconf=
+	local extras="extras/ata_id \
+				  extras/cdrom_id \
+				  extras/dasd_id \
+				  extras/edd_id \
+				  extras/firmware \
+				  extras/floppy \
+				  extras/path_id \
+				  extras/run_directory \
+				  extras/scsi_id \
+				  extras/usb_id \
+				  extras/volume_id"
+
+	use selinux && myconf="${myconf} USE_SELINUX=true"
+
+	# Not everyone has full $CHOST-{ld,ar,etc...} yet
+	local mycross=""
+	type -p ${CHOST}-ar && mycross=${CHOST}-
+
+	echo "get_libdir = $(get_libdir)"
+	# Do not work with emake
+	make \
+		EXTRAS="${extras}" \
+		udevdir="/dev/" \
+		CROSS_COMPILE=${mycross} \
+		${myconf} || die
+}
+
+src_install() {
+	# we install everything by "hand" and don't rely on the udev Makefile to do
+	# it for us (why? it's easier that way...)
+	dobin udevinfo		|| die "Required binary not installed properly"
+	dobin udevtest		|| die "Required binary not installed properly"
+	dobin udevmonitor	|| die "Required binary not installed properly"
+	into /
+	dosbin udev			|| die "Required binary not installed properly"
+	dosbin udevd		|| die "Required binary not installed properly"
+	#dosbin udevsend		|| die "Required binary not installed properly"
+	dosbin udevstart	|| die "Required binary not installed properly"
+	dosbin udevtrigger	|| die "Required binary not installed properly"
+	dosbin udevcontrol	|| die "Required binary not installed properly"
+	dosbin udevsettle	|| die "Required binary not installed properly"
+	# Helpers
+	exeinto /lib/udev
+	doexe extras/run_directory/udev_run_devd	|| die "Required helper not installed properly"
+	doexe extras/run_directory/udev_run_hotplugd	|| die "Required helper not installed properly"
+	doexe extras/ata_id/ata_id		|| die "Required helper not installed properly"
+	doexe extras/volume_id/vol_id	|| die "Required helper not installed properly"
+	doexe extras/scsi_id/scsi_id	|| die "Required helper not installed properly"
+	doexe extras/usb_id/usb_id		|| die "Required helper not installed properly"
+	doexe extras/path_id/path_id	|| die "Required helper not installed properly"
+	doexe extras/cdrom_id/cdrom_id	|| die "Required helper not installed properly"
+	doexe extras/dasd_id/dasd_id	|| die "Required helper not installed properly"
+	doexe extras/edd_id/edd_id		|| die "Required helper not installed properly"
+
+	# vol_id library (needed by mount and HAL)
+	dolib extras/volume_id/lib/*.a extras/volume_id/lib/*.so*
+	# move the .a files to /usr/lib
+	dodir /usr/$(get_libdir)
+	mv -f "${D}"/$(get_libdir)/*.a  "${D}"/usr/$(get_libdir)/
+
+	# handle static linking bug #4411
+	gen_usr_ldscript libvolume_id.so
+
+	# save pkgconfig info
+	insinto /usr/$(get_libdir)/pkgconfig
+	doins extras/volume_id/lib/*.pc
+
+	#exeinto /etc/udev/scripts
+	exeinto /lib/udev
+	#doexe extras/ide-devfs.sh
+	#doexe extras/scsi-devfs.sh
+	#doexe extras/raid-devfs.sh
+	doexe extras/floppy/create_floppy_devices	|| die "Required binary not installed properly"
+	doexe extras/firmware/firmware.sh			|| die "Required binary not installed properly"
+	doexe ${FILESDIR}/seq_node.sh				|| die "Required binary not installed properly"
+
+	# Our udev config file
+	insinto /etc/udev
+	newins ${FILESDIR}/udev.conf.post_081 udev.conf
+
+	# Our rules files
+	insinto /etc/udev/rules.d/
+	newins etc/udev/gentoo/udev.rules 50-udev.rules
+	newins ${FILESDIR}/udev.rules-096-r1 50-udev.rules
+	newins ${FILESDIR}/05-udev-early.rules-079 05-udev-early.rules
+	# We cover most of these, but add them for good measure and as examples
+	doins etc/udev/60-*.rules
+
+	# scsi_id configuration
+	insinto /etc
+	doins extras/scsi_id/scsi_id.config
+
+	# set up symlinks in /etc/hotplug.d/default
+	dodir /etc/hotplug.d/default
+	dosym ../../../sbin/udevsend /etc/hotplug.d/default/10-udev.hotplug
+
+	# set up the /etc/dev.d directory tree
+	dodir /etc/dev.d/default
+	dodir /etc/dev.d/net
+	exeinto /etc/dev.d/net
+	doexe extras/run_directory/dev.d/net/hotplug.dev
+
+	# all of the man pages
+	doman *.7
+	doman *.8
+	doman extras/ata_id/ata_id.8
+	doman extras/edd_id/edd_id.8
+	doman extras/scsi_id/scsi_id.8
+	doman extras/volume_id/vol_id.8
+	doman extras/dasd_id/dasd_id.8
+	doman extras/cdrom_id/cdrom_id.8
+
+	# our udev hooks into the rc system
+	insinto /lib/rcscripts/addons
+	newins "${FILESDIR}"/udev-start-096.sh udev-start.sh
+	doins "${FILESDIR}"/udev-stop.sh
+
+	dodoc ChangeLog FAQ README TODO RELEASE-NOTES
+	dodoc docs/{overview,udev_vs_devfs}
+	dodoc docs/writing_udev_rules/*
+
+	newdoc extras/volume_id/README README_volume_id
+
+}
+
+pkg_preinst() {
+	if [ -f "${ROOT}/etc/udev/udev.config" -a \
+	     ! -f "${ROOT}/etc/udev/udev.rules" ]
+	then
+		mv -f ${ROOT}/etc/udev/udev.config ${ROOT}/etc/udev/udev.rules
+	fi
+
+	# delete the old udev.hotplug symlink if it is present
+	if [ -h "${ROOT}/etc/hotplug.d/default/udev.hotplug" ]
+	then
+		rm -f ${ROOT}/etc/hotplug.d/default/udev.hotplug
+	fi
+
+	# delete the old wait_for_sysfs.hotplug symlink if it is present
+	if [ -h "${ROOT}/etc/hotplug.d/default/05-wait_for_sysfs.hotplug" ]
+	then
+		rm -f ${ROOT}/etc/hotplug.d/default/05-wait_for_sysfs.hotplug
+	fi
+
+	# is there a stale coldplug initscript? (CONFIG_PROTECT leaves it behind)
+	coldplug_stale=""
+	if [ -f "${ROOT}/etc/init.d/coldplug" ]
+	then
+		coldplug_stale="1"
+	fi
+
+	# Create some nodes that we know we need.
+	# set the time/date so we can see in /dev which ones we copied over
+	# in the udev-start.sh script
+	mkdir -p ${ROOT}/lib/udev/devices
+
+	if [ ! -e ${ROOT}/lib/udev/devices/null ] ; then
+	    mknod ${ROOT}/lib/udev/devices/null c 1 3
+	fi
+	chmod 666 ${ROOT}/lib/udev/devices/null
+	touch -t 200010220101 ${ROOT}/lib/udev/devices/null
+
+	if [ ! -e ${ROOT}/lib/udev/devices/zero ] ; then
+	    mknod ${ROOT}/lib/udev/devices/zero c 1 5
+	fi
+	chmod 666 ${ROOT}/lib/udev/devices/zero
+	touch -t 200010220101 ${ROOT}/lib/udev/devices/zero
+
+	if [ ! -e ${ROOT}/lib/udev/devices/console ] ; then
+	    mknod ${ROOT}/lib/udev/devices/console c 5 1
+	fi
+	chmod 600 ${ROOT}/lib/udev/devices/console
+	chown root:tty ${ROOT}/lib/udev/devices/console
+	touch -t 200010220101 ${ROOT}/lib/udev/devices/console
+}
+
+pkg_postinst() {
+	if [ "${ROOT}" = "/" -a -n "`pidof udevd`" ]
+	then
+		killall -15 udevd &>/dev/null
+		sleep 1
+		killall -9 udevd &>/dev/null
+	fi
+	/sbin/udevd --daemon
+
+	# people want reminders, I'll give them reminders.  Odds are they will
+	# just ignore them anyway...
+	if has_version '<sys-fs/udev-046' ; then
+		ewarn "Note: If you rely on the output of udevinfo for anything, please"
+		ewarn "      either run 'udevstart' now, or reboot, in order to get a"
+		ewarn "      up-to-date udev database."
+		ewarn
+	fi
+	if has_version '<sys-fs/udev-050' ; then
+		ewarn "Note: If you had written some custom permissions rules, please"
+		ewarn "      realize that the permission rules are now part of the main"
+		ewarn "      udev rules files and are not stand-alone anymore.  This means"
+		ewarn "      you need to rewrite them."
+		ewarn
+	fi
+	if has_version '<sys-fs/udev-059' ; then
+		ewarn "Note: If you are upgrading from a version of udev prior to 059"
+		ewarn "      and you have written custom rules, and rely on the etc/dev.d/"
+		ewarn "      functionality, or the etc/hotplug.d functionality, or just"
+		ewarn "      want to write some very cool and power udev rules, please "
+		ewarn "      read the RELEASE-NOTES file for details on what has changed"
+		ewarn "      with this feature, and how to change your rules to work properly."
+		ewarn
+	elif has_version '<sys-fs/udev-057' ; then
+		ewarn "Note: If you have written custom rules, and rely on the etc/dev.d/"
+		ewarn "      functionality, please read the RELEASE-NOTES file for details"
+		ewarn "      on what has changed with this feature, and how to change your"
+		ewarn "      rules to work properly."
+		ewarn
+	fi
+	if has_version '<sys-fs/udev-063' ; then
+		ewarn "Note: If you use the devfs-style names for your block devices"
+		ewarn "      or use devfs-style names in /etc/inittab or /etc/securetty or"
+		ewarn "      your GRUB or LILO kernel boot command line, you need to"
+		ewarn "      change them back to LSB compliant names, as the devfs names are"
+		ewarn "      now gone.  If you wish to use some persistent names for your"
+		ewarn "      block devices, look at the symlinks in /dev/disk/ for the names"
+		ewarn "      you can use."
+		ewarn
+	fi
+
+	if [[ ${coldplug_stale} == "1" ]] ; then
+		ewarn "A stale coldplug init script found. You should run:"
+		ewarn
+		ewarn "      rc-update del coldplug"
+		ewarn "      rm -f /etc/init.d/coldplug"
+		ewarn
+		ewarn "udev now provides its own coldplug functionality."
+	fi
+
+	einfo
+	einfo "For more information on udev on Gentoo, writing udev rules, and"
+	einfo "         fixing known issues visit:"
+	einfo "         http://www.gentoo.org/doc/en/udev-guide.xml"
+}