path: root/defaults/initrd.scripts

#!/bin/sh

call_func_timeout() {
	local func=$1 timeout=$2 pid watcher

	( ${func} ) & pid=$!
	( sleep ${timeout} && kill -HUP ${pid} ) 2>/dev/null & watcher=$!
	if wait ${pid} 2>/dev/null
	then
		kill -HUP ${watcher} 2>/dev/null
		wait ${watcher} 2>/dev/null
		return 0
	fi

	return 1
}

modules_load() {
	fn=${1}
	shift
	for module in $*
	do
		echo ${module} >> /etc/modules/${fn}
	done

	modules_scan ${fn}
}

modules_scan() {
	local MODS
	local loaded

	MODS=$(cat /etc/modules/${1} 2>/dev/null)
	[ -n "${MODS}" ] && [ -z "${QUIET}" ] && \
		printf "%b" "${BOLD}   ::${NORMAL} Loading from ${1}: "

	for x in ${MODS}
	do
		MLOAD=$(echo ${MLIST} | sed -e "s/.*${x}.*/${x}/")
		if [ "${MLOAD}" = "${x}" ] # Only module to no-load
		then
			[ -z "${QUIET}" ] && \
				printf "%b\n" "${BOLD}   ::${NORMAL} Skipping ${x} ..."
		elif [ "${MLOAD}" = "${MLIST}" ]
		then
			if [ "${ROOTFSTYPE}" != 'auto' ] && [ -b "${REAL_ROOT}" ]
			then
				echo "Root block device found, continuing ..."
				break
			fi

			if [ -n "${DEBUG}" ]
			then
				printf "%b" "${BOLD}   ::${NORMAL} "
				printf "%b" "Scanning for ${x} ..."
			fi

			modprobe ${x} >/dev/null 2>&1
			loaded=${?}

			[ -n "${DEBUG}" -a "${loaded}" = "0" ] && \
				echo "loaded"
			[ -n "${DEBUG}" -a "${loaded}" != "0" ] && \
				echo "not loaded"

			[ -z "${DEBUG}" -a "${loaded}" = "0" ] && \
				[ -z "${QUIET}" ] && \
				printf "%b" "${x} "
		else
			[ -z "${QUIET}" ] && \
				printf "%b\n" "${BOLD}   ::${NORMAL} Skipping ${x} ..."
		fi
	done
	[ -n "${MODS}" ] && [ -z "${QUIET}" ] && echo
}

uppercase() {
	# needs tr on busybox
	echo $1 | tr 'a-z' 'A-Z'
}


findmediamount() {
	# $1 = mount dir name / media name
	# $2 = recognition file
	# $3 = variable to have the device path
	# $4 = actual mount dir path (full path)
	# args remaining are possible devices

	local media=$1 recon=$2 vrbl=$3 mntdir=$4
	shift 4

	good_msg "Looking for the ${media}" ${CRYPT_SILENT}

	if [ "$#" -gt "0" ]
	then
		[ ! -d "${mntdir}" ] && mkdir -p ${mntdir} >/dev/null 2>&1
		if [ -n "${ISOBOOT}" ]
		then
			mntcddir="${mntdir%${media}}iso"
			if [ ! -f "${mntcddir}" ]
			then
				mkdir "${mntcddir}"
			fi
		else
			mntcddir="${mntdir}"
		fi

		for x in $*
		do
			# Check for a block device to mount
			if [ -b "${x}" ]
			then
				skip=0
				bsn=$(basename "${x}")
				#
				# If disk and it has at least one partition, skip.
				# We use /sys/block/${bsn}/${bsn}[0-9]* to make sure that we
				# don't skip device mapper devices. Even the craziest scenario
				# deserves a fair chance.
				#
				for part in $(ls /sys/block/${bsn}/${bsn}*[0-9]* 2>/dev/null)
				do
					skip=1
					break;
				done
				if [ ${skip} -eq 1 ]
				then
					continue
				fi
				good_msg "Attempting to mount media: ${x}" ${CRYPT_SILENT}

				mount -t ${CDROOT_TYPE} ${x} ${mntcddir} >/dev/null 2>&1
				if [ $? -eq 0 ]
				then
					if [ -n "${ISOBOOT}" ]
					then
						if [ -f "${mntcddir}/${ISOBOOT}" ]
						then
							mount -o loop "${mntcddir}/${ISOBOOT}" "${mntdir}"
							if [ $? -eq 0 ]
							then
								good_msg "iso mounted on ${mntdir}"
							fi
						fi
					fi

					# Check for the media
					if [ -f "${mntdir}/${recon}" ]
					then
						#set REAL_ROOT, CRYPT_ROOT_KEYDEV or whatever ${vrbl} is
						eval ${vrbl}'='"${x}"
						good_msg "Media found on ${x}" ${CRYPT_SILENT}
						break
					else
						umount ${mntcddir}
					fi
				fi
			fi
		done
	fi

	eval local result='$'${vrbl}

	[ -n "${result}" ] || bad_msg "Media not found" ${CRYPT_SILENT}
}

devicelist() {
	# Locate the cdrom device with our media on it.
	# CDROM DEVICES
	local DEVICES="/dev/cdroms/* /dev/ide/cd/* /dev/sr*"
	# USB Keychain/Storage
	DEVICES="${DEVICES} /dev/sd*"
	# IDE devices
	DEVICES="${DEVICES} /dev/hd*"
	# virtio devices
	DEVICES="${DEVICES} /dev/vd*"
	# USB using the USB Block Driver
	DEVICES="${DEVICES} /dev/ubd* /dev/ubd/*"
	# iSeries devices
	DEVICES="${DEVICES} /dev/iseries/vcd*"
	# builtin mmc/sd card reader devices
	DEVICES="${DEVICES} /dev/mmcblk* /dev/mmcblk*/*"
	# fallback scanning, this might scan something twice, but it's better than
	# failing to boot.
	[ -e /proc/partitions ] && DEVICES="${DEVICES} $(awk '/([0-9]+[[:space:]]+)/{print "/dev/" $4}' /proc/partitions)"
	echo ${DEVICES}
}

bootstrapFS() {
	if [ "${aufs}" = '1' ]
	then
		# Directories used for rw aufs mount filesystem
		aufs_union=/union aufs_memory=/memory

		# Mountpoint for the aufs dev
		aufs_dev_mnt=/mnt/aufs-dev

		if [ -z "${aufs_dev_uid}" ]
		then
			aufs_branch=${aufs_memory}/aufs-rw-branch/default
		else
			aufs_branch=${aufs_memory}/aufs-rw-branch/${aufs_dev_uid}
		fi

		mkdir -p ${aufs_memory} ${aufs_union} ${aufs_dev_mnt}
	else
		# Legacy SquashFS implementation
		good_msg "Making tmpfs for ${NEW_ROOT}"
		mount -n -t tmpfs tmpfs ${NEW_ROOT}
	fi

	# Setup the filesystem nodes and directories
	for i in ${CDROOT_PATH} /mnt/livecd /mnt/key /mnt/gentoo /tmp /tmp/.initrd /dev /proc /run /sys; do
		mkdir -p "${NEW_ROOT}${i}"
		chmod 755 "${NEW_ROOT}${i}"
	done

	[ ! -d "${CDROOT_PATH}" ] && mkdir -p "${CDROOT_PATH}"
	[ ! -e "${NEW_ROOT}/dev/null" ] && mknod -m 666 "${NEW_ROOT}"/dev/null c 1 3
	[ ! -e "${NEW_ROOT}/dev/zero" ] && mknod -m 666 "${NEW_ROOT}"/dev/zero c 1 5
	[ ! -e "${NEW_ROOT}/dev/console" ] && mknod -m 600 "${NEW_ROOT}"/dev/console c 5 1
	[ ! -e "${NEW_ROOT}/dev/ttyS0" ] && mknod -m 660 "${NEW_ROOT}"/dev/ttyS0 c 4 64

	# For SGI LiveCDs
	if [ "${LOOPTYPE}" = "sgimips" ]
	then
		[ ! -e "${NEW_ROOT}/dev/sr0" ] && mknod "${NEW_ROOT}/dev/sr0" b 11 0
		[ ! -e "${NEW_ROOT}/dev/loop0" ] && mknod "${NEW_ROOT}/dev/loop0" b 7 0
	fi

	# Required for splash to work. Not an issue with the initrd as this
	# device isn't created there and is not needed.
	for minor in 0 1
	do
		[ ! -e "${NEW_ROOT}/dev/${minor}" ] && mknod -m 600 "${NEW_ROOT}/dev/tty${minor}" c 4 ${minor}
	done
}

bootstrapCD() {
	local DEVICES=

	# The device was specified on the command line, so there's no need
	# to scan a bunch of extra devices
	[ -n "${CDROOT_DEV}" ] && DEVICES="${CDROOT_DEV}"
	[ -z "${CDROOT_DEV}" ] && DEVICES=$(devicelist)

	findmediamount "cdrom" "${SUBDIR}/${CDROOT_MARKER}" \
		"REAL_ROOT" "${CDROOT_PATH}" ${DEVICES}

	if [ "${VERIFY}" = '1' ]
	then
		cd "${CDROOT_PATH}"
		if [ -f isoroot_checksums ]
		then
			good_msg "Verifying checksums, this may take some time ..."
			if ! busybox sha512sum -c isoroot_checksums
			then
				bad_msg "Some checksums failed, press any key to poweroff ..."
				read -n1 -s
				busybox poweroff -f
			else
				good_msg "Checksums all valid, continuing boot ..."
			fi
			cd "${OLDPWD}"
		else
			bad_msg "Verify enabled but no checksums file exists, skipping"
		fi
	fi
}

bootstrapKey() {
	# $1 = ROOT/SWAP
	local KEYDEVS=$(devicelist)
	eval local keyloc='"${CRYPT_'${1}'_KEY}"'

	findmediamount "key" "${keyloc}" "CRYPT_${1}_KEYDEV" "/mnt/key" ${KEYDEVS}
}

cache_cd_contents() {
	# Check loop file exists and cache to ramdisk if DO_cache is enabled
	if [ "${LOOPTYPE}" != "noloop" ] && [ "${LOOPTYPE}" != "sgimips" ]
	then
		check_loop
		if [ "${DO_cache}" ]
		then
			# TODO: Check the size of the image versus the size of our tmpfs
			# along with the amount of available RAM and increase tmpfs size
			# if necessary. (Not having awk sucks...)
			# z=0
			# for i in $(cat /proc/meminfo | grep -e ^MemFree -e ^Cached | \
			# cut -d: -f2 | cut -dk -f1 | sed -e "s/^\s*//") ; do
			# z=$((${z} + ${i})) ; done
			# echo ${z}
			good_msg "Copying loop file for caching ..."
			# Verify that the needed directory exists
			mkdir -p "$(dirname ${NEW_ROOT}/mnt/${LOOP})"
			cp -a ${CDROOT_PATH}/${LOOP} ${NEW_ROOT}/mnt/${LOOP}
			if [ $? -ne 0 ]
			then
				warn_msg "Failed to cache the loop file! Lack of RAM?"
				rm -rf ${NEW_ROOT}/mnt/${LOOP} 2>/dev/null
				rm -rf ${NEW_ROOT}/mnt/livecd.* 2>/dev/null
				rm -rf ${NEW_ROOT}/mnt/image.* 2>/dev/null
				rm -rf ${NEW_ROOT}/mnt/zisofs 2>/dev/null
			fi
		fi
	fi
}

mount_sysfs() {
	mount -t sysfs sysfs /sys -o noexec,nosuid,nodev >/dev/null 2>&1
	[ $? -eq 0 ] || bad_msg "Failed to mount /sys!"
}

# Check support for both aufs and overlayfs
# union file system style support
#
is_union_modules() {
	local mod mod_dir

	case $1 in
		aufs)
			mod=${aufs_modules}
			mod_dir=${aufs_modules_dir}
			;;
		overlayfs)
			mod=${overlayfs_modules}
			mod_dir=${overlayfs_modules_dir}
	esac

	# When {aufs,overlayfs}.modules= is used or $CDROOT_PATH/modules
	# directory is available
	if [ "${mod}" = '1' -o -d ${CDROOT_PATH}/modules ]
	then
		if [ -d ${CDROOT_PATH}/modules ]
		then
			warn_msg "Adding all modules in ${CDROOT_PATH}/modules"
			union_insert_modules "${CDROOT_PATH}"/modules
		# Is it a block device?
		elif [ ! -b "${mod_dir}" ]
		then
			bad_msg "${mod_dir} is not a valid block device"
			bad_msg "aborting modules insert into ${CHROOT}"
		else
			warn_msg "Adding all modules in ${mod_dir}"

			mkdir /mnt/modules
			mount "${mod_dir}" /mnt/modules
			union_insert_modules /mnt/modules
		fi
	fi

	return 0
}

# Insert a directory tree $2 to a aufs union specified by $1
# Top-level read-write branch is specified by it's index 0
# $1 = union absolute path (starting with /)
# $2 = path to data directory
#
aufs_insert_dir() {
	# Always mount it over the precedent (add:1:)
	if mount -n -o "remount,add:1:$2=rr" aufs "$1"
	then
		good_msg "Addition of $2 to $1 successful"
	fi
}

# Insert all modules found in $1, usually $CDROOT_PATH
# added to allow users to add their own apps.
union_insert_modules() {
	local module

	for module in "$1/"*.lzm; do
		if [ "${overlayfs}" = '1' ]
		then
			if union_mod overlayfs "${module}"
			then
				good_msg "Addition of '${module}' to overlay successful"
			else
				bad_msg "Unable to insert module: '${module}'"
			fi

			# Used in setup_overlayfs()
			mod_path="${mod_path}:${mod_dir}/.${mod}"

			# Assign variable with paths to modules mount point
			# TODO: Stop using eval
			eval ${mod}="${mod_dir}/.${mod}"
			mods="${mods} ${mod}"
		else
			union_mod aufs "${module}" || bad_msg "Unable to insert module: '${module}'"
		fi
	done
}

# Helper function for union_insert_modules()
union_mod() {
	[ -e "$2" ] || return 0

	mod_dir=/mnt/overlay

	mod=${2##*/}
	mod=${mod//-/_}
	mod=${mod%.*}

	if [ "${aufs}" = '1' ]
	then
		if [ ! -d "${aufs_union}"/mnt/"${mod}" ]
		then
			mkdir -p "${aufs_union}"/mnt/modules/"${mod}" || return
		fi

		mount -o loop,ro "$2" "${aufs_union}"/mnt/modules/"${mod}"
		aufs_insert_dir "${aufs_union}" "${aufs_union}"/mnt/modules/"${mod}"
	else
		if [ ! -d "${mod_dir}/.${mod}" ]
		then
			mkdir -p "${mod_dir}/.${mod}" || return
		fi

		mount -o loop,ro "$2" "${mod_dir}/.${mod}"
	fi
}

# Implements no_umounts variable into $CHROOT/etc/conf.d/localmount for a cleaner shutdown process
conf_rc_no_umounts() {
	local conf nomount fnd
	conf=${CHROOT}/etc/conf.d/localmount fnd=0

	if nomount=$(grep -n '^[[:blank:]]*no_umounts=' ${conf})
	then
		local i n data cmd IFS
		IFS='
'
		set -- ${nomount}
		unset IFS

		for i
		do
			n=${i%%:*}; i=${i#"$n"}
			data=${i#*=}

			case ${data} in
				"\"${no_umounts}\""|"'${no_umounts}'") fnd=1;;
				*) cmd="${cmd}${n} d;"
			esac
		done

		if [ -n "${cmd}" ]
		then
			sed -i "${cmd%;}" ${conf}
			test_success "Unable to edit /etc/conf.d/localmount"
		fi
	fi

	if [ ${fnd} -eq 0 ]
	then
		printf 'no_umounts="%s"\n' "${no_umounts}" >> ${conf}
		test_success "Unable to write to /etc/conf.d/localmount"
	fi
}

# is_int "${A}" ["${B}"..]
# NOTE we consider a leading 0 false as it would be interpreted as octal
is_int() {
	local i
	for i
	do
		case ${i} in
			''|*[!0-9]*|0?*) return 1 ;;
			*) :
		esac
	done
}

# Function to create an ext2 fs on $aufs_dev, $aufs_dev_mnt mountpoint
create_changefs() {
	local size

	while :;
	do
		read -p '<< Size of file (Press Enter for default 256 MB): ' size

		size=${size:-256}

		if ! is_int ${size}
		then
			bad_msg "Non numeric value given for size, try again"
			continue
		elif [ 15 -ge "${size}" ]
		then
			bad_msg "Please give a size of at least 16 Megabytes"
		else
			if dd if=/dev/zero "of=${aufs_dev_mnt}${aufs_union_file}" bs=1 seek="${size}"M count=0 >/dev/null 2>&1
			then
				good_msg "Creation of ${aufs_union_file}, ${size}MB on ${aufs_dev successful}, formatting it ext2"
				mke2fs -F "${aufs_dev_mnt}${aufs_union_file}" >/dev/null 2>&1
				break
			else
				rm "${aufs_dev_mnt}${aufs_union_file}"
				bad_msg "Unable to create ${aufs_union_file#*/} on ${aufs_dev} of ${size}MB"
				bad_msg "Ensure your disk is not full or read-only"

				read -p '<< Type "a" to abort, anything else to continue : ' doabort
				if [ "${doabort}" = 'a' ]
				then
					bad_msg "Aborting creation of ${aufs_union_file}!"
					umount "${aufs_dev}" && rmdir "${aufs_dev_mnt}"
					return 1
				fi
			fi
		fi
	done
	return $?
}

setup_aufs() {
	bootstrapCD

	if [ "${aufs_dev}" = "search" ]
	then
		findmediamount "aufs-dev" "${aufs_union_file}" \
			"aufs_dev" "${aufs_dev_mnt}" $(devicelist)
		aufs_mounted="1"
	elif [ -z "${aufs_dev}" ] && [ -w "${CDROOT_PATH}/${aufs_union_file}" ]
	then
		aufs_dev="${REAL_ROOT}"
		aufs_dev_mnt="${CDROOT_PATH}"
		aufs_mounted="1"
	fi

	if [ -z "${aufs_dev}" ] && [ -w "${CDROOT_PATH}/casper-rw" ]
	then
		aufs_dev="${REAL_ROOT}"
		aufs_dev_mnt="${CDROOT_PATH}"
		aufs_union_file="/casper-rw"
		aufs_mounted="1"
	fi

	if [ -n "${aufs_dev}" ]
	then
		if [ ! -b "${aufs_dev}" ]
		then
			bad_msg "${aufs_dev} is not a valid block device"
			local invalidblk=1
			unset aufs_dev
		#skip this block when aufs_dev_mnt is already mounted
		elif [ "${aufs_mounted}" != "1" ]
		then
			good_msg "Mounting ${aufs_dev} to ${aufs_memory} for aufs support"

			if ! mount -t auto "${aufs_dev}" "${aufs_dev_mnt}" >/dev/null 2>&1
			then
				bad_msg "Mount of ${aufs_dev} failed, falling back to ramdisk based aufs"
				unset aufs_dev
			fi
		fi

		# Check and attempt to create the AUFS union file
		if [ ! -e ${aufs_dev_mnt}${aufs_union_file} ] && [ -n "${aufs_dev}" ]
		then
			create_changefs && mount -t auto "${aufs_dev_mnt}${aufs_union_file}" "${aufs_memory}"
		elif [ -n "${aufs_dev}" ]
		then
			while :;
			do
				if mount -t auto "${aufs_dev_mnt}${aufs_union_file}" "${aufs_memory}" >/dev/null 2>&1
				then
					if [ "${aufs_union_file}" = "/casper-rw" ]
					then
						bad_msg "Use of livecd.aufs preferred to casper-rw for changes saving, please rename the file."
					fi
					break
				else
					bad_msg "Mounting of changes file failed, Running e2fsck"

					if ! hash e2fsck >/dev/null 2>&1
					then
						bad_msg "/sbin/e2fsck not found! aborting filesystem check"
						bad_msg "Moving ${aufs_union_file#*/} to ${aufs_union_file#*/}.bad"

						mv "${aufs_dev_mnt}${aufs_union_file}" "${aufs_dev_mnt}${aufs_union_file}.bad"
						break
					fi

					if e2fsck "${aufs_dev_mnt}${aufs_union_file}" >/dev/null 2>&1
					then
						good_msg "e2fsck ran successfully. Please verify data after bootup"
					else
						bad_msg "Your ${aufs_union_file#*/} image might be corrupted"
						bad_msg "moving ${aufs_union_file#*/} to ${aufs_union_file#*/}.bad"

						mv "${aufs_dev_mnt}${aufs_union_file}" "${aufs_dev_mnt}${aufs_union_file}.bad"
						break
					fi
				fi
			done
		fi

		# Mount tmpfs only in the case when aufs= boot parameter was
		# empty or we were not able to mount the storage device
		if [ "${CDROOT}" = '1' ] && [ ! -f "${aufs_dev_mnt}${aufs_union_file}" ]
		then
			aufs_xino=${aufs_memory}
			umount "${aufs_memory}" >/dev/null 2>&1

			if [ "${invalidblk}" = '1' ]
			then
				bad_msg "Verify that you've entered a valid device path"
			else
				bad_msg "Create an extfs ${aufs_union_file#*/} file on this device"
			fi

			bad_msg "if you wish to have aufs data persistency on reboots"
			bad_msg "Falling back to ramdisk based aufs"
			good_msg "Mounting ramdisk to ${aufs_memory} for aufs support"

			mount -t tmpfs tmpfs "${aufs_memory}"
		else
			aufs_xino=${aufs_memory}/xino

			mkdir -p "${aufs_xino}"
			mount -t tmpfs aufs-xino "${aufs_xino}"
		fi
	else
		aufs_xino=${aufs_memory}

		good_msg "Mounting ramdisk to ${aufs_memory} for aufs support"
		mount -t tmpfs tmpfs "${aufs_memory}"
	fi

	mkdir -p "${aufs_branch}"
	if ! mount -t aufs -n -o "nowarn_perm,udba=none,xino=${aufs_xino}/.aufs.xino,br:${aufs_branch}=rw" aufs "${aufs_union}"
	then
		bad_msg "Can't setup union ${aufs_union} in directory!"
		aufs=0
	fi
}

setup_overlayfs() {
	# Setup directories and vars
	local overlay=/mnt/overlay
	local upperdir="${overlay}/.upper"
	local workdir="${overlay}/.work"
	local static=/mnt/livecd

	rundebugshell overlayfs
	for i in "${overlay}" "${static}"
	do
		[ ! -d "${i}" ] && mkdir -p "${i}"
	done

	good_msg "Loading overlayfs"
	modprobe overlay >/dev/null 2>&1
	checkfs overlay

	mount -t squashfs -o loop,ro "${CDROOT_PATH}/${LOOPEXT}${LOOP}" "${static}"
	mount -t tmpfs none "${overlay}"
	mkdir "${upperdir}" "${workdir}"

	is_union_modules overlayfs
	mount -t overlay overlay -o lowerdir="${static}${mod_path}",upperdir="${upperdir}",workdir="${workdir}" "${NEW_ROOT}"

	[ ! -d "${NEW_ROOT}${overlay}" ] && mkdir -p "${NEW_ROOT}${overlay}"
	[ ! -d "${NEW_ROOT}${static}" ] && mkdir -p "${NEW_ROOT}${static}"

	echo "overlay / overlay defaults 0 0" > "${NEW_ROOT}"/etc/fstab

	for i in "${overlay}" "${static}"
	do
		mount --bind "${i}" "${NEW_ROOT}${i}"
	done

	# Did we populate the overlayfs modules path locations variable?
	if [ -n "${mods}" ]
	then
		for i in ${mods}
		do
			mount --bind "${overlay}/.${i}" "${NEW_ROOT}/${overlay}/.${i}"
		done
	fi
}


findnfsmount() {
	if start_network
	then
		[ -e /rootpath ] && NFSROOT=$(cat /rootpath)

		if [ -z "${NFSROOT}" ]
		then
			# Obtain NFSIP
			OPTIONS=$(busybox dmesg | grep rootserver | sed -e "s/,/ /g")
			for OPTION in ${OPTIONS}
			do
				if [ $(echo ${OPTION} | sed -e "s/=/ /g" | cut -d " " -f 1) = 'rootserver' ]
				then
					NFSIP=$(echo ${OPTION} | sed -e "s/=/ /g" | cut -d " " -f 2)
				fi
			done

			# Obtain NFSPATH
			OPTIONS=$(busybox dmesg | grep rootpath | sed -e "s/,/ /g")
			for OPTION in ${OPTIONS}
			do
				if [ $(echo ${OPTION} | sed -e "s/=/ /g" | cut -d " " -f 1) = 'rootpath' ]
				then
					NFSPATH=$(echo ${OPTION} | sed -e "s/=/ /g" | cut -d " " -f 2)
				fi
			done

			# Setup NFSROOT
			if [ -n "${NFSIP}" -a -n "${NFSPATH}" ]
			then
				NFSROOT="${NFSIP}:${NFSPATH}"
			else
				bad_msg "The DHCP Server did not send a valid root-path."
				bad_msg "Please check your DHCP setup, or provide a nfsroot=<...> parameter."
				return 1
			fi
		fi

		if [ -n "${NFSROOT}" ]
		then
			NFSOPTIONS=${NFSROOT#*,}
			NFSROOT=${NFSROOT%%,*}
			if [ "${NFSOPTIONS}" = "${NFSROOT}" ]
			then
				NFSOPTIONS=${DEFAULT_NFSOPTIONS}
			else
				NFSOPTIONS="${DEFAULT_NFSOPTIONS},${NFSOPTIONS}"
			fi

			if [ "${CDROOT}" != '0' ]
			then
				good_msg "Attempting to mount NFS CD image on ${NFSROOT} with options ${NFSOPTIONS}"
				mount -t nfs -o ${NFSOPTIONS} ${NFSROOT} ${CDROOT_PATH}
				if [ $? -eq 0 ]
				then
					REAL_ROOT="/dev/nfs"
				else
					bad_msg "NFS Mounting failed. Is the path corrent ?"
					return 1
				fi
			else
				good_msg "Attempting to mount NFS root on ${NFSROOT} with options ${NFSOPTIONS}"
				mount -t nfs -o ${NFSOPTIONS} ${NFSROOT} ${NEW_ROOT}
				if [ $? -eq 0 ]
				then
					REAL_ROOT="/dev/nfs"
				else
					bad_msg "NFS Mounting failed. Is the path correct ?"
					return 1
				fi
				# FIXME: Need to start portmap and the other rpc daemons in
				# order to remount rw.
			fi

		fi
	else # IP / DHCP
		return 1
	fi
}

find_real_device() {
	local DEVICE="${1}"
	case "${DEVICE}" in
		UUID\=*|LABEL\=*)
			local REAL_DEVICE=""
			local retval=1

			if [ ${retval} -ne 0 ]
			then
				REAL_DEVICE=$(findfs "${DEVICE}" 2>/dev/null)
				retval=$?
			fi

			if [ ${retval} -ne 0 ]
			then
				REAL_DEVICE=$(busybox findfs "${DEVICE}" 2>/dev/null)
				retval=$?
			fi

			if [ ${retval} -ne 0 ]
			then
				REAL_DEVICE=$(blkid -o device -l -t "${DEVICE}")
				retval=$?
			fi

			if [ ${retval} -eq 0 ] && [ -n "${REAL_DEVICE}" ]
			then
				DEVICE="${REAL_DEVICE}"
			fi
		;;
	esac
	printf "%s" "${DEVICE}"
}

check_loop() {
	if [ -z "${LOOP}" -o ! -e "${CDROOT_PATH}/${LOOP}" ]
	then

		bad_msg "Invalid loop location: ${LOOP}"
		bad_msg 'Please export LOOP with a valid location, or reboot and pass a proper loop=...'
		bad_msg 'kernel command line!'

		run_shell
	fi
}

run_shell() {
	[ -x /bin/sh ] && SH=/bin/sh || SH=/bin/ash

	export PS1='rescueshell \w \# '

	if [ -n "${CONSOLE}" ] && [ -c "/dev/${CONSOLE}" ]
	then
		setsid ${SH} -c "exec sh --login </dev/${CONSOLE} >/dev/${CONSOLE} 2>&1"
	elif command -v cttyhack 1>/dev/null 2>&1
	then
		setsid cttyhack ${SH} --login
	elif [ -c '/dev/tty1' ]
	then
		setsid ${SH} -c 'exec sh --login </dev/tty1 >/dev/tty1 2>&1'
	else
		${SH} --login
	fi

	echo

	:> "${GK_SHELL_LOCKFILE}"
}

fs_type_in_use() {
	fs_type=$1
	cut -d ' ' -f 3 < /proc/mounts | fgrep -q "${fs_type}"
}

mount_devfs() {
	# Use devtmpfs if enabled in kernel,
	# else tmpfs. Always run mdev just in case
	local devfs=tmpfs

	if checkfs devtmpfs >/dev/null
	then
		devfs=devtmpfs
	fi

	# Options copied from /etc/init.d/udev-mount, should probably be kept in sync
	if ! fs_type_in_use devtmpfs
	then
		mount -t ${devfs} -o "exec,nosuid,mode=0755,size=10M" udev /dev \
			|| bad_msg "Failed to mount /dev as ${devfs}"
	fi

	# http://git.busybox.net/busybox/plain/docs/mdev.txt
	if ! fs_type_in_use devpts
	then
		mkdir -m 0755 /dev/pts
		mount -t devpts -o gid=5,mode=0620 devpts /dev/pts || bad_msg "Failed to mount /dev/pts"
	fi
}

test_success() {
	retcode=$?
	# If last command failed send error message and fall back to a shell
	if [ "${retcode}" != '0' ]
	then
		error_string=${1}
		error_string="${error_string:-run command}"
		bad_msg 'Failed to ${1}; failing back to the shell ...'
		run_shell
	fi
}


# msg functions arguments
# $1 string
# $2 hide flag

good_msg() {
	[ -n "${QUIET}" ] && [ -z "${DEBUG}" ] && return 0

	msg_string=${1}
	msg_string="${msg_string:-...}"
	[ "$2" != '1' ] && printf "%b\n" "${GOOD}>>${NORMAL}${BOLD} ${msg_string} ${NORMAL}"
}

bad_msg() {
	msg_string=${1}
	msg_string="${msg_string:-...}"
	if [ "$2" != '1' ]
	then
		splash 'verbose' >/dev/null &
		printf "%b\n" "${BAD}!!${NORMAL}${BOLD} ${msg_string} ${NORMAL}"
	fi
}

warn_msg() {
	msg_string=${1}
	msg_string="${msg_string:-...}"
	[ "$2" != '1' ] && printf "%b\n" "${WARN}**${NORMAL}${BOLD} ${msg_string} ${NORMAL}"
}

crypt_filter() {
	if [ "${CRYPT_SILENT}" = '1' ]
	then
		eval $1 >/dev/null 2>&1
	else
		splash 'verbose' >/dev/null &
		eval $1
		res=$?
		if [ ${res} -eq 0 ]
		then
			splash set_msg 'Disk unlocked.'
		fi
		return ${res}
	fi
}

prompt_user() {
	# $1 = variable whose value is the path (examples: "REAL_ROOT",
	#      "LUKS_KEYDEV")
	# $2 = label
	# $3 = optional explanations for failure

	eval local oldvalue='$'${1}

	if [ $# != 2 -a $# != 3 ]
	then
		bad_msg "Bad invocation of function prompt_user."
		bad_msg "Please file a bug report with this message"
		exit 1
	fi
	[ -n "${3}" ] && local explnt=" or : ${3}" || local explnt="."

	bad_msg "Could not find the ${2} in ${oldvalue}${explnt}"
	bad_msg "Please specify another value or:"
	bad_msg "- press Enter for the same"
	bad_msg '- type "shell" for a shell'
	bad_msg '- type "q" to skip ...'
	printf "%s" "${2}(${oldvalue}) :: "
	read -t 10 ${1}
	if [ $? -gt 0 ]
	then
		# prompt timed out
		printf "\n"
	fi

	case $(eval echo '$'${1}) in
		'q')
			eval ${1}'='${oldvalue}
			warn_msg "Skipping step, this will likely cause a boot failure."
			;;
		'shell')
			eval ${1}'='${oldvalue}
			warn_msg "To leave and try again just press <Ctrl>+D"
			run_shell
			;;
		'')
			eval ${1}'='${oldvalue}
			;;
	esac
}

cmdline_hwopts() {
	# Scan CMDLINE for any "doscsi" or "noscsi"-type arguments
	local FOUND
	local TMP_HWOPTS

	for x in ${HWOPTS}
	do
		for y in ${CMDLINE}
		do
			if [ "${y}" = "do${x}" ]
			then
				MY_HWOPTS="${MY_HWOPTS} ${x}"
			elif [ "${y}" = "no${x}" ]
			then
				MY_HWOPTS="$(echo ${MY_HWOPTS} | sed -e "s/${x}//g" -)"
			fi
			if [ "$(echo ${y} | cut -b -7)" = "keymap=" ]
			then
				MY_HWOPTS="${MY_HWOPTS} keymap"
			fi
		done
	done

	# Shouldnt need to sort this as the following loop should figure out the
	# duplicates and strip them out
	#MY_HWOPTS=$(echo ${MY_HWOPTS} | sort)

	for x in ${MY_HWOPTS}
	do
		FOUND=0
		for y in ${TMP_HWOPTS}
		do
			if [ "${y}" = "${x}" ]
			then
				continue 2
			fi
		done
		TMP_HWOPTS="${TMP_HWOPTS} ${x}"
		eval DO_$(echo ${x} | sed 's/-//')=1
	done

	MY_HWOPTS=${TMP_HWOPTS}
}

load_modules() {
	# Load modules listed in MY_HWOPTS if /lib/modules exists for the running
	# kernel version
	if [ -d "/lib/modules/${KV}" ]
	then
		good_msg 'Loading modules'
		# Load appropriate kernel modules
		for modules in ${MY_HWOPTS}
		do
			modules_scan ${modules}
		done
	else
		good_msg 'Skipping module load; no modules in the ramdisk!'
	fi
}

setup_keymap() {
	if [ "${DO_keymap}" ]
	then
		if [ ! -e /dev/vc/0 -a ! -e /dev/tty0 ]
		then
			DEVBIND=1
			mount -o bind ${NEW_ROOT}/dev /dev
		fi
		[ ! -e /dev/tty0 ] && ln -s /dev/tty1 /dev/tty0

		[ -f /lib/keymaps/keymapList ] && chooseKeymap

		[ "${DEVBIND}" = '1' ] && umount /dev
	fi
}

setup_locale() {
	if [ -n "${locale}" ]
	then
		echo "LANG=${locale}" >${NEW_ROOT}/etc/sysconfig/locale
	fi
}

chooseKeymap() {
	good_msg "Loading keymaps"
	if [ -z "${keymap}" ]
	then
		splash 'verbose' >/dev/null &
		cat /lib/keymaps/keymapList
		read -t 10 -p '<< Load keymap (Enter for default): ' keymap
		case ${keymap} in
			1|azerty) keymap=azerty ;;
			2|be) keymap=be ;;
			3|bg) keymap=bg ;;
			4|br-a) keymap=br-a ;;
			5|br-l) keymap=br-l ;;
			6|by) keymap=by ;;
			7|cf) keymap=cf ;;
			8|croat) keymap=croat ;;
			9|cz) keymap=cz ;;
			10|de) keymap=de ;;
			11|dk) keymap=dk ;;
			12|dvorak) keymap=dvorak ;;
			13|es) keymap=es ;;
			14|et) keymap=et ;;
			15|fi) keymap=fi ;;
			16|fr) keymap=fr ;;
			17|gr) keymap=gr ;;
			18|hu) keymap=hu ;;
			19|il) keymap=il ;;
			20|is) keymap=is ;;
			21|it) keymap=it ;;
			22|jp) keymap=jp ;;
			23|la) keymap=la ;;
			24|lt) keymap=lt ;;
			25|mk) keymap=mk ;;
			26|nl) keymap=nl ;;
			27|no) keymap=no ;;
			28|pl) keymap=pl ;;
			29|pt) keymap=pt ;;
			30|ro) keymap=ro ;;
			31|ru) keymap=ru ;;
			32|se) keymap=se ;;
			33|sg) keymap=sg ;;
			34|sk-y) keymap=sk-y ;;
			35|sk-z) keymap=sk-z ;;
			36|slovene) keymap=slovene ;;
			37|trf) keymap=trf ;;
			38|trq) keymap=trq ;;
			39|ua) keymap=ua ;;
			40|uk) keymap=uk ;;
			41|us) keymap=us ;;
			42|wangbe) keymap=wangbe ;;
			43|sf|ch*) keymap=sf ;;
		esac
	fi
	if [ -e /lib/keymaps/${keymap}.map ]
	then
		good_msg "Loading the '${keymap}' keymap ..."
		loadkmap < /lib/keymaps/${keymap}.map
#		xkeymap=${keymap}
#		echo ${keymap} | egrep -e "[0-9]+" >/dev/null 2>&1
#		if [ $? -eq 0 ]
#		then
#			xkeymap=$(tail -n 8 /lib/keymaps/keymapList | grep ${keymap} | sed -r "s/.*\s+${keymap}\s+([a-z-]+).*/\1/g" | egrep -v 1)
#		fi
		mkdir -p /etc/sysconfig
#		echo "XKEYBOARD=${xkeymap}" > /etc/sysconfig/keyboard
		echo "XKEYBOARD=${keymap}" > /etc/sysconfig/keyboard
		splash set_msg "Set keymap to '${keymap}'"
	elif [ -z "${keymap}" ]
	then
		good_msg
		good_msg "Keeping default keymap"
		splash set_msg "Keeping default keymap"
	else
		bad_msg "Sorry, but keymap '${keymap}' is invalid!"
		unset keymap
		chooseKeymap
	fi
}

#
# Copy over user selected keymap
#
copyKeymap() {
	if [ -e /etc/sysconfig/keyboard -a ${CDROOT} -eq 1 ]
	then
		[ ! -d ${NEW_ROOT}/etc/sysconfig ] && mkdir -p ${NEW_ROOT}/etc/sysconfig
		cp /etc/sysconfig/keyboard ${NEW_ROOT}/etc/sysconfig/keyboard
	fi
}

# This helper function is to be called using call_func_timeout.
# It enables us to wait a reasonable amount of time until /dev/zfs appears.
waitForZFS() {
	while [ ! -c /dev/zfs ]
	do
		echo >/dev/null
	done

	exit 1
}

start_volumes() {
	# Here, we check for /dev/device-mapper, and if it exists, we setup a
	# a symlink, which should hopefully fix bug #142775 and bug #147015
	if [ -e /dev/device-mapper ] && [ ! -e /dev/mapper/control ]
	then
		mkdir -p /dev/mapper
		ln -sf /dev/device-mapper /dev/mapper/control
	fi

	if [ "${USE_MDADM}" = '1' ]
	then
		if [ -x '/sbin/mdadm' ]
		then
			/sbin/mdadm --assemble --scan
			#Intel Matrix RAID (and possibly others) have a container layer above the actual volumes,
			#So we have to look for volumes that haven't been activated.
			mdadm -IRs
		else
			bad_msg "mdadm not found: skipping mdadm raid assembly!"
		fi
	fi

	if [ "${USE_MULTIPATH_NORMAL}" = '1' ]
	then
		for multipath_path in /sbin/multipath /bin/multipath MISSING
		do
			[ -x "${multipath_path}" ] && break
		done

		for dmsetup_path in /sbin/dmsetup /bin/dmsetup MISSING
		do
			[ -x "${dmsetup_path}" ] && break
		done

		for kpartx_path in /sbin/kpartx /bin/kpartx MISSING
		do
			[ -x "${kpartx_path}" ] && break
		done

		fail=0
		[ "${multipath_path}" = "MISSING" ] && fail=1 && bad_msg "domultipath called, but multipath binary missing! Skipping multipath"
		[ "${dmsetup_path}" = "MISSING" ] && fail=1 && bad_msg "domultipath called, but dmsetup binary missing! Skipping multipath"
		[ "${kpartx_path}" = "MISSING" ] && fail=1 && bad_msg "domultipath called, but kpartx binary missing! Skipping multipath"

		if [ ${fail} -eq 0 ]
		then
			good_msg "Scanning for multipath devices"
			good_msg ":: Populating scsi_id info for libudev queries"
			mkdir -p /run/udev/data
			for ech in /sys/block/*
			do
				local tgtfile=b$(cat ${ech}/dev)
				/lib/udev/scsi_id -g -x /dev/${ech##*/} |sed -e 's/^/E:/' >/run/udev/data/${tgtfile}
			done
			${multipath_path} -v 0
			sleep 2
			good_msg "Activating multipath devices"
			${dmsetup_path} ls --target multipath --exec "${kpartx_path} -a -v"
			#for MULTIPATH_VOLUMES in /dev/mapper/*; do ${kpartx_path} -a ${MULTIPATH_VOLUMES}; done
		fi
	fi

	if [ "${USE_DMRAID_NORMAL}" = '1' ]
	then
		if [ -x '/sbin/dmraid' ]
		then
			good_msg "Activating Device-Mapper RAID(s)"
			if [ -z "${DMRAID_OPTS}" ]
			then
				/sbin/dmraid -ay
			else
				/sbin/dmraid -ay ${DMRAID_OPTS}
			fi
			[ -x '/sbin/kpartx' ] && /sbin/dmsetup ls --exec '/sbin/kpartx -a -s'
		fi
	fi

	if [ "${USE_LVM_NORMAL}" = '1' ]
	then
		for lvm_path in /sbin/lvm /bin/lvm MISSING
		do
			[ -x "${lvm_path}" ] && break
		done

		if [ "${lvm_path}" = "MISSING" ]
		then
			bad_msg "dolvm invoked, but LVM binary not available! skipping LVM volume group activation!"
		else
			for dev in ${RAID_DEVICES}
			do
				setup_md_device "${dev}"
			done

			# This is needed for LVM to accept the following logic
			lvm_commands="#! ${lvm_path}"

			# If there is a cache, update it. Unbreak at least dmcrypt
			[ -d /etc/lvm/cache ] && lvm_commands="${lvm_commands} \nvgscan"

			# To activate volumegroups on all devices in the cache
			lvm_commands="${lvm_commands} \nvgchange -ay --sysinit"

			# To create symlinks so users can use real_root=/dev/vg/root
			# This needs to run after vgchange, using vgchange --mknodes is too
			# early.
			lvm_commands="${lvm_commands} \nvgmknodes --ignorelockingfailure"

			# And finally execute it all (/proc/... needed if lvm is compiled without readline)
			good_msg "Scanning for and activating Volume Groups"
			printf "%b\n" "${lvm_commands}" | ${lvm_path} /proc/self/fd/0
		fi
	fi

	if [ "${USE_BTRFS}" = '1' ]
	then
		if [ -x '/sbin/btrfs' ]
		then
			/sbin/btrfs device scan
		else
			bad_msg "btrfs not found: skipping btrfs device scanning!"
		fi
	fi

	if [ "${USE_ZFS}" = '1' ]
	then
		# Avoid race involving asynchronous module loading
		if call_func_timeout waitForZFS 5
		then
			bad_msg "Cannot import ZFS pool because /dev/zfs is missing"
		elif [ -z "${ZFS_POOL}" ]
		then
			good_msg "Importing ZFS pools"

			/sbin/zpool import -N -a ${ZPOOL_CACHE} ${ZPOOL_FORCE}
			if [ $? -eq 0 ]
			then
				good_msg "Importing ZFS pools succeeded"
			else
				bad_msg "Imported ZFS pools failed"
			fi
		else

			if [ "$(zpool list -H -o name ${ZFS_POOL} 2>&1)" = "${ZFS_POOL}" ]
			then
				good_msg "ZFS pool ${ZFS_POOL} already imported."

				if [ -n "${CRYPT_ROOT}" -o -n "${CRYPT_SWAP}" ]
				then
					good_msg "LUKS detected. Reimporting ${ZFS_POOL}"
					/sbin/zpool export -f "${ZFS_POOL}"
					/sbin/zpool import -N ${ZPOOL_CACHE} ${ZPOOL_FORCE} "${ZFS_POOL}"
				fi
			else
				good_msg "Importing ZFS pool ${ZFS_POOL}"

				/sbin/zpool import -N ${ZPOOL_CACHE} ${ZPOOL_FORCE} "${ZFS_POOL}"
				if [ $? -eq 0 ]
				then
					good_msg "Import of ${ZFS_POOL} succeeded"
				else
					bad_msg "Import of ${ZFS_POOL} failed"
				fi
			fi
		fi
	fi
}

start_iscsi() {
	if [ ! -n "${ISCSI_NOIBFT}" ]
	then
		good_msg "Activating iSCSI via iBFT"
		iscsistart -b
	fi

	if [ -n "${ISCSI_INITIATORNAME}" ] && [ -n "${ISCSI_TARGET}" ] && [ -n "${ISCSI_ADDRESS}" ]
	then
		good_msg "Activating iSCSI via cmdline"

		if [ -n "${ISCSI_TGPT}" ]
		then
			ADDITIONAL="${ADDITIONAL} -g ${ISCSI_TGPT}"
		else
			ADDITIONAL="${ADDITIONAL} -g 1"
		fi

		if [ -n "${ISCSI_PORT}" ]
		then
			ADDITIONAL="${ADDITIONAL} -p ${ISCSI_PORT}"
		fi

		if [ -n "${ISCSI_USERNAME}" ]
		then
			ADDITIONAL="${ADDITIONAL} -u ${ISCSI_USERNAME}"
		fi

		if [ -n "${ISCSI_PASSWORD}" ]
		then
			ADDITIONAL="${ADDITIONAL} -w ${ISCSI_PASSWORD}"
		fi

		if [ -n "${ISCSI_USERNAME_IN}" ]
		then
			ADDITIONAL="${ADDITIONAL} -U ${ISCSI_USERNAME_IN}"
		fi

		if [ -n "${ISCSI_PASSWORD_IN}" ]
		then
			ADDITIONAL="${ADDITIONAL} -W ${ISCSI_PASSWORD_IN}"
		fi

		if [ -n "${ISCSI_DEBUG}" ]
		then
			ADDITIONAL="${ADDITIONAL} -d ${ISCSI_DEBUG}"
		fi

		iscsistart -i "${ISCSI_INITIATORNAME}" -t "${ISCSI_TARGET}" -a "${ISCSI_ADDRESS}" ${ADDITIONAL}
	fi
}


# Open a LUKS device
# It is either the root or a swap, other devices are supported in the scripts provided with sys-fs/cryptsetup
# $1 - root/swap
openLUKS() {
	if [ ! -x /sbin/cryptsetup ]
	then
		bad_msg "cryptsetup program is missing. Was initramfs built without --luks parameter?"
		exit 1
	fi

	case $1 in
		root)
			local TYPE=ROOT
			;;
		swap)
			local TYPE=SWAP
			;;
	esac

	eval local LUKS_DEVICE='"${CRYPT_'${TYPE}'}"' LUKS_NAME="$1" LUKS_KEY='"${CRYPT_'${TYPE}'_KEY}"'
	eval local LUKS_KEYDEV='"${CRYPT_'${TYPE}'_KEYDEV}"' LUKS_TRIM='"${CRYPT_'${TYPE}'_TRIM}"'
	eval local OPENED_LOCKFILE='"${CRYPT_'${TYPE}'_OPENED_LOCKFILE}"'
	local DEV_ERROR=0 KEY_ERROR=0 KEYDEV_ERROR=0
	local mntkey="/mnt/key/" crypt_filter_ret= cryptsetup_options=''

	while true
	do
		local gpg_cmd=""
		if [ -e "${OPENED_LOCKFILE}" ]
		then
			good_msg "The LUKS device ${LUKS_DEVICE} meanwhile was opened by someone else."
			break
		# if crypt_silent=1 and some error occurs, enter shell quietly
		elif [ \( ${CRYPT_SILENT} -eq 1 \) -a \( \( \( ${DEV_ERROR} -eq 1 \) -o \( ${KEY_ERROR} -eq 1 \) \) -o \( ${KEYDEV_ERROR} -eq 1 \) \) ]
		then
			run_shell
		elif [ ${DEV_ERROR} -eq 1 ]
		then
			prompt_user "LUKS_DEVICE" "${LUKS_NAME}"
			DEV_ERROR=0
		elif [ ${KEY_ERROR} -eq 1 ]
		then
			prompt_user "LUKS_KEY" "${LUKS_NAME} key"
			KEY_ERROR=0
		elif [ ${KEYDEV_ERROR} -eq 1 ]
		then
			prompt_user "LUKS_KEYDEV" "${LUKS_NAME} key device"
			KEYDEV_ERROR=0
		else
			LUKS_DEVICE=$(find_real_device "${LUKS_DEVICE}")
			if [ -z "${LUKS_DEVICE}" ]
			then
				bad_msg "Looks like CRYPT_${TYPE} kernel cmdline argument is not set." ${CRYPT_SILENT}
				DEV_ERROR=1
				continue
			fi

			setup_md_device ${LUKS_DEVICE}
			cryptsetup isLuks ${LUKS_DEVICE}
			if [ $? -ne 0 ]
			then
				bad_msg "The LUKS device ${LUKS_DEVICE} does not contain a LUKS header" ${CRYPT_SILENT}
				DEV_ERROR=1
				continue
			else
				if [ "x${LUKS_TRIM}" = "xyes" ]
				then
					good_msg "Enabling TRIM support for ${LUKS_NAME} ..." ${CRYPT_SILENT}
					cryptsetup_options="${cryptsetup_options} --allow-discards"
				fi

				# Handle keys
				if [ -n "${LUKS_KEY}" ]
				then
					local REAL_LUKS_KEYDEV="${LUKS_KEYDEV}"
					if [ ! -e "${mntkey}${LUKS_KEY}" ]
					then
						REAL_LUKS_KEYDEV=$(find_real_device "${LUKS_KEYDEV}")
						if [ -b "${REAL_LUKS_KEYDEV}" ]
						then good_msg "Using key device ${REAL_LUKS_KEYDEV}." ${CRYPT_SILENT}
						else
							good_msg "Please insert removable device ${LUKS_KEYDEV} for ${LUKS_NAME}" ${CRYPT_SILENT}
							# abort after 10 secs
							local count=10
							while [ ${count} -gt 0 ]
							do
								count=$((count-1))
								sleep 1
								REAL_LUKS_KEYDEV=$(find_real_device "${LUKS_KEYDEV}")
								if [ -b "${REAL_LUKS_KEYDEV}" ]
								then
									good_msg "Removable device ${REAL_LUKS_KEYDEV} detected." ${CRYPT_SILENT}
									break
								fi
							done
							if [ ! -b "${REAL_LUKS_KEYDEV}" ]
							then
								eval CRYPT_${TYPE}_KEY=${LUKS_KEY}
								bootstrapKey ${TYPE}
								eval LUKS_KEYDEV='"${CRYPT_'${TYPE}'_KEYDEV}"'
								REAL_LUKS_KEYDEV=$(find_real_device "${LUKS_KEYDEV}")
								if [ ! -b "${REAL_LUKS_KEYDEV}" ]
								then
									KEYDEV_ERROR=1
									bad_msg "Removable device ${LUKS_KEYDEV} not found." ${CRYPT_SILENT}
									continue
								fi
								# continue otherwise will mount keydev which is mounted by bootstrap
								continue
							fi
						fi

						# At this point a device was recognized, now let's see if the key is there
						[ ! -d "${mntkey}" ] && mkdir -p "${mntkey}" >/dev/null 2>&1

						mount -n -o ro ${REAL_LUKS_KEYDEV} ${mntkey} >/dev/null 2>&1
						if [ "$?" != '0' ]
						then
							KEYDEV_ERROR=1
							bad_msg "Mounting of device ${REAL_LUKS_KEYDEV} failed." ${CRYPT_SILENT}
							continue
						else
							good_msg "Removable device ${REAL_LUKS_KEYDEV} mounted." ${CRYPT_SILENT}
							sleep 2
							# keyfile exists?
							if [ ! -e "${mntkey}${LUKS_KEY}" ]
							then
								umount -n "${mntkey}" >/dev/null 2>&1
								KEY_ERROR=1
								KEYDEV_ERROR=1
								bad_msg "Key {LUKS_KEY} on device ${REAL_LUKS_KEYDEV} not found." ${CRYPT_SILENT}
								continue
							fi
						fi
					fi
					# At this point a candidate key exists (either mounted before or not)
					good_msg "${LUKS_KEY} on device ${REAL_LUKS_KEYDEV} found" ${CRYPT_SILENT}

					if [ "$(echo ${LUKS_KEY} | grep -o '.gpg$')" = ".gpg" ]
					then
						if [ ! -x '/sbin/gpg' ]
						then
							bad_msg "GPG-encrypted key file provided but gpg program is missing. Was initramfs built without --gpg parameter?"
							bad_msg "Falling back to passphrase usage!"
						else
							[ -e /dev/tty ] && mv /dev/tty /dev/tty.org
							mknod /dev/tty c 5 1
							cryptsetup_options="${cryptsetup_options} -d -"
							gpg_cmd="/sbin/gpg --logger-file /dev/null --quiet --decrypt ${mntkey}${LUKS_KEY} |"
						fi
					else
						cryptsetup_options="${cryptsetup_options} -d ${mntkey}${LUKS_KEY}"
					fi
				fi
				# At this point, keyfile or not, we're ready!
				crypt_filter "${gpg_cmd}cryptsetup ${cryptsetup_options} luksOpen ${LUKS_DEVICE} ${LUKS_NAME}"
				crypt_filter_ret=$?

				[ -e /dev/tty.org ] \
					&& rm -f /dev/tty \
					&& mv /dev/tty.org /dev/tty

				if [ ${crypt_filter_ret} -eq 0 ]
				then
					touch "${OPENED_LOCKFILE}"
					good_msg "LUKS device ${LUKS_DEVICE} opened" ${CRYPT_SILENT}
					break
				elif [ ! -e "${OPENED_LOCKFILE}" ]
				then
					bad_msg "Failed to open LUKS device ${LUKS_DEVICE}" ${CRYPT_SILENT}
					DEV_ERROR=1
					KEY_ERROR=1
					KEYDEV_ERROR=1
				fi
			fi
		fi
	done
	umount "${mntkey}" >/dev/null 2>&1
	rmdir -p "${mntkey}" >/dev/null 2>&1
}

iface_name() {
	local ifname="${1}"

	if echo "${ifname}" | grep -qE ':|-'
	then
		local interface=
		local mac="$(echo "${ifname}" | sed 'y/ABCDEF-/abcdef:/')"

		for interface in /sys/class/net/*
		do
			if [ $(cat ${interface}/address) = "${mac}" ]
			then
				echo ${interface##*/}
				return
			fi
		done
	else
		echo "${ifname}"
	fi
}

start_network() {
	# At least gk.net.iface can only be processed after sysfs was
	# mounted.
	local x=
	for x in ${CMDLINE}
	do
		case "${x}" in
			ip=*)
				IP=${x#*=}
			;;
			gk.net.dhcp.retries=*)
				local tmp_n_retries=${x#*=}
				if is_int "${tmp_n_retries}"
				then
					GK_NET_DHCP_RETRIES=${tmp_n_retries}
				else
					warn_msg "'${x}' does not look like a valid number -- will keep using default value ${GK_NET_DHCP_RETRIES}!"
				fi
				unset tmp_n_retries
			;;
			gk.net.gw=*)
				GK_NET_GW=${x#*=}
			;;
			gk.net.iface=*)
				local tmp_iface=$(iface_name "${x#*=}")
				if [ -z "${tmp_iface}" ]
				then
					warn_msg "Interface specified by '${x}' not found, falling back to genkernel defaults ..."
				else
					GK_NET_IFACE=${tmp_iface}
				fi
			;;
			gk.net.routes=*)
				GK_NET_ROUTES=${x#*=}
			;;
			gk.net.timeout.dad=*)
				local tmp_dad_timeout=${x#*=}
				if is_int "${tmp_dad_timeout}"
				then
					GK_NET_TIMEOUT_DAD=${tmp_dad_timeout}
				else
					warn_msg "'${x}' does not look like a valid number -- will keep using default value ${GK_NET_TIMEOUT_DAD}!"
				fi
				unset tmp_dad_timeout
			;;
			gk.net.timeout.deconfiguration=*)
				local tmp_deconfiguration_timeout=${x#*=}
				if is_int "${tmp_deconfiguration_timeout}"
				then
					GK_NET_TIMEOUT_DECONFIGURATION=${tmp_deconfiguration_timeout}
				else
					warn_msg "'${x}' does not look like a valid number -- will keep using default value ${GK_NET_TIMEOUT_DECONFIGURATION}!"
				fi
				unset tmp_deconfiguration_timeout
			;;
			gk.net.timeout.dhcp=*)
				local tmp_dhcp_timeout=${x#*=}
				if is_int "${tmp_dhcp_timeout}"
				then
					GK_NET_TIMEOUT_DHCP=${tmp_dhcp_timeout}
				else
					warn_msg "'${x}' does not look like a valid number -- will keep using default value ${GK_NET_TIMEOUT_DHCP}!"
				fi
				unset tmp_dhcp_timeout
			;;
		esac
	done

	if [ -z "${IP}" -o "${IP}" = 'dhcp' ]
	then
		good_msg "Bringing up interface ${GK_NET_IFACE} using dhcp ..." ${QUIET}
		busybox udhcpc -i "${GK_NET_IFACE}" -n -t ${GK_NET_DHCP_RETRIES} -T ${GK_NET_TIMEOUT_DHCP} -R -p "${GK_NET_DHCP_PIDFILE}"
	else
		good_msg "Bringing up interface ${GK_NET_IFACE} ..." ${QUIET}
		ip link set "${GK_NET_IFACE}" up

		good_msg "Setting address '${IP}' on ${GK_NET_IFACE} ..." ${QUIET}
		ip addr add "${IP}" dev "${GK_NET_IFACE}"

		if [ -n "${GK_NET_ROUTES}" ]
		then
			local route=
			for route in ${GK_NET_ROUTES}
			do
				good_msg "Adding additional route '${route}' on ${GK_NET_IFACE} ..." ${QUIET}
				ip route add "${route}" dev "${GK_NET_IFACE}"
			done
		fi

		if [ -n "${GK_NET_GW}" ]
		then
			good_msg "Adding default route via '${GK_NET_GW}' on ${GK_NET_IFACE} ..." ${QUIET}
			ip route add default via "${GK_NET_GW}" dev "${GK_NET_IFACE}"
		fi
	fi

	touch "${GK_NET_LOCKFILE}"
}

kill_network() {
	if [ -s "${GK_NET_DHCP_PIDFILE}" ]
	then
		good_msg "Stopping udhcpc ..."
		kill $(cat "${GK_NET_DHCP_PIDFILE}")
	fi

	# If we are too quick and interface is still configuring IPv6
	# waiting for DAD to complete due to received IPv6 RA, we have to
	# wait.
	# If we don't wait, ip command will bring down interface for a
	# moment but it will return to up state once DAD is completed which
	# will cause trouble with real system which is expecting an unused
	# interface.
	if ipv6_tentative
	then
		[ -z "${QUIET}" ] && \
		printf "%b" "${WARN}**${NORMAL}${BOLD} Waiting for tentative IPv6 addresses to complete DAD ${NORMAL}..."

		local dad_timeout=10
		while [ ${dad_timeout} -gt 0 ]
		do
			ipv6_tentative || break
			sleep 1
			: $(( dad_timeout -= 1 ))
			[ -z "${QUIET}" ] && \
			printf "."
		done

		echo ""

		if [ ${dad_timeout} -le 0 ]
		then
			bad_msg "DAD still not completed after ${GK_NET_TIMEOUT_DAD} seconds!"
		fi
	fi

	[ -z "${QUIET}" ] && \
	printf "%b" "${GOOD}>>${NORMAL}${BOLD} Bringing down interface ${GK_NET_IFACE} ${NORMAL}..."

	local deconfiguration_timeout=${GK_NET_TIMEOUT_DECONFIGURATION}
	while [ ${deconfiguration_timeout} -gt 0 ]
	do
		ip addr flush dev "${GK_NET_IFACE}"
		ip route flush dev "${GK_NET_IFACE}"
		ip link set "${GK_NET_IFACE}" down
		if grep -q "down" "/sys/class/net/${GK_NET_IFACE}/operstate"
		then
			break
		fi
		sleep 1
		: $(( deconfiguration_timeout -= 1 ))
		[ -z "${QUIET}" ] && \
		printf "."
	done

	echo ""

	if [ ${deconfiguration_timeout} -le 0 ]
	then
		bad_msg "Failed to bring down interface ${GK_NET_IFACE} within ${GK_NET_TIMEOUT_DECONFIGURATION} seconds!"
		return
	fi

	rm "${GK_NET_LOCKFILE}"
}

ipv6_tentative() {
	if ip -family inet6 addr show dev "${GK_NET_IFACE}" | grep -q " tentative "
	then
		return 0
	else
		return 1
	fi
}

start_LUKS() {
	# if key is set but neither ssh enabled or key device is given, find
	# the key device

	[ -n "${CRYPT_ROOT_KEY}" ] && [ -z "${CRYPT_ROOT_KEYDEV}" ] \
		&& sleep 6 && bootstrapKey "ROOT"

	if [ -n "${CRYPT_ROOT}" ]
	then
		openLUKS "root"
		if [ -n "${REAL_ROOT}" ]
		then
			# Rescan volumes
			start_volumes
		else
			REAL_ROOT="/dev/mapper/root"
		fi
	fi

	# same for swap, but no need to sleep if root was unencrypted
	[ -n "${CRYPT_SWAP_KEY}" ] && [ -z "${CRYPT_SWAP_KEYDEV}" ] \
		&& { [ -z "${CRYPT_ROOT}" ] && sleep 6; bootstrapKey "SWAP"; }

	if [ -n "${CRYPT_SWAP}" ]
	then
		openLUKS "swap"
		if [ -z "${REAL_RESUME}" ]
		then
			# Resume from swap as default
			REAL_RESUME="/dev/mapper/swap"
		fi
	fi
}

start_sshd() {
	if [ -s "${GK_SSHD_PIDFILE}" ]
	then
		# Already running
		return
	fi

	if [ ! -x "/usr/sbin/dropbear" ]
	then
		bad_msg "/usr/sbin/dropbear not found! Did you call genkernel with --ssh parameter?"
		return
	fi

	# setup environment variables for the ssh login shell
	local varname= varvalue=
	touch "${CRYPT_ENV_FILE}"
	for varname in CRYPT_ROOT CRYPT_ROOT_TRIM CRYPT_SILENT CRYPT_SWAP DEBUG
	do
		eval varvalue=\$${varname}
		echo "${varname}=${varvalue}" >> "${CRYPT_ENV_FILE}"
	done

	touch /var/log/lastlog

	good_msg "Starting dropbear sshd ..." ${QUIET}
	/usr/sbin/dropbear -p ${GK_SSHD_PORT} -R -P "${GK_SSHD_PIDFILE}" 2>/var/log/dropbear.log
	test_success "Failed to start dropbear"
}

wait_sshd() {
	if [ -z "${GK_SSHD_WAIT}" -o "${GK_SSHD_WAIT}" = '0' ]
	then
		return
	fi

	if [ -f "${GK_SSHD_LOCKFILE}" -o ! -s "${GK_SSHD_PIDFILE}" ]
	then
		return
	fi

	printf "%b" "${GOOD}>>${NORMAL}${BOLD} gk.sshd.wait set; Waiting ${GK_SSHD_WAIT} seconds for SSH connection ${NORMAL}..."

	local ssh_timeout=${GK_SSHD_WAIT}
	while [ ${ssh_timeout} -gt 0 ]
	do
		if [ -f "${GK_SSHD_LOCKFILE}" ]
		then
			echo ""
			last -W | head -n 3 2>/dev/null
			break
		fi
		sleep 1
		: $(( ssh_timeout -= 1 ))
		printf "."
	done

	echo ""
}

kill_sshd() {
	if [ -s "${GK_SSHD_PIDFILE}" ]
	then
		good_msg "Stopping dropbear sshd ..." ${QUIET}
		kill $(cat "${GK_SSHD_PIDFILE}")
	fi
}

cleanup() {
	if [ -f "${GK_NET_LOCKFILE}" ]
	then
		if [ -f "${GK_SSHD_LOCKFILE}" ]
		then
			warn_msg "The lockfile at '${GK_SSHD_LOCKFILE}' exists."
			warn_msg "The boot process will be paused until the lock is removed."
			while true
			do
				if [ -f "${GK_SSHD_LOCKFILE}" ]
				then
					sleep 1
				else
					break
				fi
			done
		fi
	fi

	kill_sshd

	# Ensure that we terminated any existing connection
	pkill -9 dropbear >/dev/null 2>&1

	if [ -f "${GK_NET_LOCKFILE}" ]
	then
		kill_network
	fi
}

sdelay() {
	# Sleep a specific number of seconds if SDELAY is set
	if [ -n "${SDELAY}" ]
	then
		good_msg "Waiting ${SDELAY} seconds ..."
		sleep ${SDELAY}
	elif [ "${CDROOT}" = '1' ]
	then
		good_msg 'Hint: Use scandelay[=seconds] if your live medium is slow and boot fails'
	fi
}

quiet_kmsg() {
	# if QUIET is set make the kernel less chatty
	[ -n "${QUIET}" ] && echo '0' > /proc/sys/kernel/printk
}

verbose_kmsg() {
	# if QUIET is set make the kernel less chatty
	[ -n "${QUIET}" ] && echo '6' > /proc/sys/kernel/printk
}

cdupdate() {
	if [ "${CDROOT}" = '1' ]
	then
		cdupdate_path=''
		for p in /${NEW_ROOT}/${CDROOT_PATH}/ /${CDROOT_PATH}/
		do
			[ -x "${p}/cdupdate.sh" ] && cdupdate_path="${p}/cdupdate.sh" && break
		done

		if [ -n "${cdupdate_path}" ]
		then
			good_msg "Running cdupdate.sh (${cdupdate_path})"
			${cdupdate_path}
			if [ "$?" != '0' ]
			then
				bad_msg "Executing cdupdate.sh failed!"
				run_shell
			fi
		else
			good_msg 'No cdupdate.sh script found, skipping ...'
		fi
	fi
}

setup_btrfsctl() {
	# start BTRFS volume detection, if available
	[ -x /sbin/btrfsctl ] && /sbin/btrfsctl -a
}

setup_md_device() {
	local device

	[ -z "$1" ] && device="${REAL_ROOT}" || device="$1"
	[ -z "${device}" ] && return # LiveCD

	if [ $(echo ${device}|sed -e 's#\(luks:\)\?\(/dev/md\)[[:digit:]]\+#\2#') = "/dev/md" ]
	then
		good_msg 'Detected real_root as a md device. Setting up the device node ...'
		MD_NUMBER=$(echo ${device}|sed -e 's#\(luks:\)\?/dev/md\([[:digit:]]\+\)#\2#')
		if [ ! -e /dev/md${MD_NUMBER} ]
		then
			mknod /dev/md${MD_NUMBER} b 9 ${MD_NUMBER} >/dev/null 2>&1
			[ $? -ne 0 ] && bad_msg "Creation of /dev/md${MD_NUMBER} failed ..."
		fi
		mdstart ${MDPART} /dev/md${MD_NUMBER}
	fi
}

rundebugshell() {
	if [ -n "${DEBUG}" ]
	then
		good_msg 'Starting debug shell as requested by "debug" option.'
		good_msg "Stopping by: ${1}"
		run_shell
	fi
}

do_resume() {
	if [ -d /proc/suspend2 -o -d /sys/power/suspend2 -o -d /sys/power/tuxonice ]
	then
		tuxonice_resume
	else
		swsusp_resume
	fi
}

swsusp_resume() {
	# determine swap resume partition
	local device=$(ls -lL "${REAL_RESUME}" | sed 's/\  */ /g' | cut -d \  -f 5-6 | sed 's/,\ */:/')
	[ -f /sys/power/resume ] && echo "${device}" > /sys/power/resume
}

tuxonice_resume() {
	local splash_theme
	if grep "splash=" /proc/cmdline >/dev/null 2>&1
	then
		splash_theme=$(cat /proc/cmdline | sed 's/.*splash=/splash=/' | sed 's/ .*//' | sed 's/.*theme://' | sed 's/,.*//')
	fi

	local tuxonice_userui_program="/sys/power/tuxonice/user_interface/program"
	local tuxonice_do_resume="/sys/power/tuxonice/do_resume"
	local tuxonice_resumedev="/sys/power/tuxonice/resume"
	local tuxonice_replace_swsusp="/sys/power/tuxonice/replace_swsusp"

	#
	# Backward compatibility
	#
	if [ -e /sys/power/suspend2 ]
	then
		tuxonice_userui_program="/sys/power/suspend2/user_interface/program"
		tuxonice_do_resume="/sys/power/suspend2/do_resume"
		tuxonice_resumedev="/sys/power/suspend2/resume"
		tuxonice_replace_swsusp="/sys/power/suspend2/replace_swsusp"
	elif [ -e /proc/suspend2 ]
	then
		tuxonice_userui_program="/proc/suspend2/userui_program"
		tuxonice_do_resume="/proc/suspend2/do_resume"
		tuxonice_resumedev="/proc/suspend2/resume"
		tuxonice_replace_swsusp="/proc/suspend2/replace_swsusp"
	fi

	# if 'use_swsusp' is given, use swsusp instead
	if grep "use_swsusp" /proc/cmdline >/dev/null 2>&1
	then
		echo 0 > ${tuxonice_replace_swsusp}
		swsusp_resume
		return
	fi

	modules_scan tuxonice

	# we both configure tuxonice and activate resuming,
	# however the kernel will resume only if an image is found

	if ! grep suspend_noui /proc/cmdline >/dev/null 2>&1
	then
		which suspend2ui_text >/dev/null 2>&1 && which suspend2ui_text > "${tuxonice_userui_program}"
		which tuxoniceui_text >/dev/null 2>&1 && which tuxoniceui_text > "${tuxonice_userui_program}"

		if [ -n "${splash_theme}" ]
		then
			ln -s /etc/splash/${splash_theme} /etc/splash/suspend2
			ln -s /etc/splash/${splash_theme} /etc/splash/tuxonice

			which suspend2ui_fbsplash >/dev/null 2>&1 && which suspend2ui_fbsplash > "${tuxonice_userui_program}"
			which tuxoniceui_fbsplash >/dev/null 2>&1 && which tuxoniceui_fbsplash > "${tuxonice_userui_program}"
		fi

	fi
	echo "${REAL_RESUME}" > "${tuxonice_resumedev}"
	echo > "${tuxonice_do_resume}"
}

find_loop() {
	for loop in ${LOOPS}
	do
		if [ -e "${CDROOT_PATH}""${loop}" ]
		then
			LOOP="${loop}"
		fi
	done
}

find_looptype() {
	LOOPTYPE="${LOOP##*.}"
	[ "${LOOPTYPE}" = "loop" ] && LOOPTYPE="normal"
	[ "${LOOP}" = "/zisofs" ] && LOOPTYPE="${LOOP#/}"
	[ -z "${LOOPTYPE}" ] && LOOPTYPE="noloop"
}

getdvhoff() {
	echo $(( $(hexdump -n 4 -s $((316 + 12 * $2)) -e '"%i"' $1) * 512))
}

setup_squashfs_aufs() {
	# Setup aufs directories and vars
	aufs_rw_branch=/mnt/aufs-rw-branch aufs_ro_branch=/mnt/livecd

	for dir in ${aufs_rw_branch} ${aufs_ro_branch}
	do
		[ ! -d "${dir}" ] && mkdir -p "${dir}"
	done

	good_msg "Loading aufs module ..."
	modprobe aufs >/dev/null 2>&1
	checkfs aufs

	mount -t squashfs -o loop,ro "${CDROOT_PATH}/${LOOPEXT}${LOOP}" "${aufs_ro_branch}"
	mount -t tmpfs none "${aufs_rw_branch}"
	mount -t aufs -o "br:${aufs_rw_branch}:${aufs_ro_branch}" aufs "${NEW_ROOT}"
}

setup_unionfs() {
	local rw_dir=$1
	local ro_dir=$2
	if [ "${USE_UNIONFS_NORMAL}" = '1' ]
	then
		# Directory used for rw changes in union mount filesystem
		UNION=/union
#		MEMORY=/memory
#		if [ -z "${UID}" ]
#		then
#			CHANGES=${MEMORY}/unionfs_changes/default
#		else
#			CHANGES=${MEMORY}/unionfs_changes/${UID}
#		fi

#		mkdir -p ${MEMORY}
		mkdir -p ${UNION}
		good_msg "Loading fuse module"
		modprobe fuse >/dev/null 2>&1
#		 if [ -n "${UNIONFS}" ]
#		 then
#			 CHANGESDEV=${UNIONFS}
#			 good_msg "mounting ${CHANGESDEV} to ${MEMORY} for unionfs support"
#			 mount -t auto ${CHANGESDEV} ${MEMORY}
#			 # mount tmpfs only in the case when changes= boot parameter was
#			 # empty or we were not able to mount the storage device
#			 ret=$?
#			 if [ ${ret} -ne 0 ]
#			 then
#				 bad_msg "mount of ${CHANGESDEV} failed falling back to ramdisk based unionfs"
#				 mount -t tmpfs tmpfs ${MEMORY}
#			 fi
#			 if [ "${CDROOT}" -eq '1' -a ! -f ${MEMORY}/livecd.unionfs ]
#			 then
#				 umount ${MEMORY}
#				 bad_msg "failed to find livecd.unionfs file on ${CHANGESDEV}"
#				 bad_msg "create a livecd.unionfs file on this device if you wish to use it for unionfs"
#				 bad_msg "falling back to ramdisk based unionfs for safety"
#				 mount -t tmpfs tmpfs ${MEMORY}
#			 fi
#		 else
#			 good_msg "Mounting ramdisk to ${MEMORY} for unionfs support..."
#			 mount -t tmpfs tmpfs ${MEMORY}
#		 fi

		mkdir /tmp
		mkdir -p ${UNION}
#		mkdir -p ${CHANGES}
#		mount -t unionfs -o dirs=${CHANGES}=rw unionfs ${UNION}
		good_msg "Creating union mount"
		unionfs -o allow_other,cow,noinitgroups,suid,dev,default_permissions,use_ino ${rw_dir}=RW:${ro_dir}=RO ${UNION} 2>/dev/null
		ret=$?
		if [ ${ret} -ne 0 ]
		then
			bad_msg "Can't setup union mount!"
			USE_UNIONFS_NORMAL=0
		fi
		[ ! -d "${NEW_ROOT}${CDROOT_PATH}" ] && mkdir -p "${NEW_ROOT}${CDROOT_PATH}"
		mount --bind "${CDROOT_PATH}" "${NEW_ROOT}${CDROOT_PATH}"
	else
		USE_UNIONFS_NORMAL=0
	fi
}

get_mounts_list() {
	awk '
		/^[[:blank:]]*#/ { next }
		{ print $1 }
		' ${NEW_ROOT}/etc/initramfs.mounts
}

get_mount_fstype() {
	[ -e "${NEW_ROOT}"/etc/fstab ] || return 1
	awk -v fs="$1" '
		/^[[:blank:]]*#/ { next }
		$2 == fs { print $3 }
		' ${NEW_ROOT}/etc/fstab
}

get_mount_options() {
	[ -e "${NEW_ROOT}"/etc/fstab ] || return 1
	awk -v fs="$1" '
		/^[[:blank:]]*#/ { next }
		$2 == fs { print $4 }
		' ${NEW_ROOT}/etc/fstab
}

get_mount_device() {
	[ -e "${NEW_ROOT}"/etc/fstab ] || return 1
	awk -v fs="$1" '
		/^[[:blank:]]*#/ { next }
		$2 == fs { print $1 }
		' ${NEW_ROOT}/etc/fstab
}

# If the kernel is handed a mount option is does not recognize, it WILL fail to
# mount. util-linux handles auto/noauto, but busybox passes it straight to the kernel
# which then rejects the mount.
# To make like a little easier, busybox mount does not care about leading,
# trailing or duplicate commas.
strip_mount_options() {
	sed -r \
		-e 's/(,|^)(no)?auto(,|$)/,/g' \
		-e 's/(,|^)iversion(,|$)/,/g'
}

checkfs() {
	if [ -r "/proc/filesystems" ]
	then
		if grep -qs "$1" /proc/filesystems
		then
			return 0
		fi
	fi

	warn_msg "No ${1} support listed in /proc/filesystems"
	warn_msg "${1} is not likely to work on this medium"

	return 1
}