path: root/docs/en/xml/administration.xml

<!-- <!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook V4.1//EN"> -->
<chapter id="administration">
  <title>Administering Bugzilla</title>

  <section id="parameters">
    <title>Bugzilla Configuration</title>

    <para>
      Bugzilla is configured by changing various parameters, accessed
      from the "Edit parameters" link in the page footer. Here are
      some of the key parameters on that page. You should run down this
      list and set them appropriately after installing Bugzilla.
    </para>

    <indexterm>
      <primary>checklist</primary>
    </indexterm>

    <variablelist>
      <varlistentry>
        <term>
          maintainer
        </term>
        <listitem>
          <para> 
            The maintainer parameter is the email address of the person 
            responsible for maintaining this Bugzilla installation.
            The address need not be that of a valid Bugzilla account.
          </para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>
          urlbase
        </term>
        <listitem>
          <para>
            This parameter defines the fully qualified domain name and web 
            server path to your Bugzilla installation.
          </para>

          <para>
            For example, if your Bugzilla query page is
            <filename>http://www.foo.com/bugzilla/query.cgi</filename>, 
            set your <quote>urlbase</quote>
            to <filename>http://www.foo.com/bugzilla/</filename>.
          </para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>
          makeproductgroups
        </term>
        <listitem>
          <para>
            This dictates whether or not to automatically create groups
            when new products are created.
          </para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>
          useentrygroupdefault
        </term>
        <listitem>
          <para>
            Bugzilla products can have a group associated with them, so that
            certain users can only see bugs in certain products. When this 
            parameter is set to <quote>on</quote>, this 
            causes the initial group controls on newly created products 
            to place all newly-created bugs in the group 
            having the same name as the product immediately.
            After a product is initially created, the group controls
            can be further adjusted without interference by 
            this mechanism.
          </para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>
          maildeliverymethod
        </term>
        <listitem>
          <para>
            This is used to specify how email is sent, or if it is sent at 
            all.  There are several options included for different MTAs, 
            along with two additional options that disable email sending.  
            "testfile" does not send mail, but instead saves it in 
            <filename>data/mailer.testfile</filename> for later review.  
            "none" disables email sending entirely.
          </para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>
          shadowdb
        </term>
        <listitem>
          <para>
            You run into an interesting problem when Bugzilla reaches a
            high level of continuous activity. MySQL supports only table-level
            write locking. What this means is that if someone needs to make a
            change to a bug, they will lock the entire table until the operation
            is complete. Locking for write also blocks reads until the write is
            complete. Note that more recent versions of mysql support row level
            locking using different table types. These types are slower than the
            standard type, and Bugzilla does not yet take advantage of features
            such as transactions which would justify this speed decrease. The
            Bugzilla team are, however, happy to hear about any experiences with
            row level locking and Bugzilla.
          </para>

          <para>
            The <quote>shadowdb</quote> parameter was designed to get around
            this limitation. While only a single user is allowed to write to
            a table at a time, reads can continue unimpeded on a read-only
            shadow copy of the database. Although your database size will
            double, a shadow database can cause an enormous performance
            improvement when implemented on extremely high-traffic Bugzilla
            databases.
          </para>
        
          <para>
            As a guide, on reasonably old hardware, mozilla.org began needing 
            <quote>shadowdb</quote> when they reached around 40,000 Bugzilla
            users with several hundred Bugzilla bug changes and comments per day.
          </para>

          <para>
            The value of the parameter defines the name of the shadow bug
            database. You will need to set the host and port settings from
            the params page, and set up replication in your database server
            so that updates reach this readonly mirror. Consult your database
            documentation for more detail.
          </para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>
          shutdownhtml
        </term>
        <listitem>
          <para>
            If you need to shut down Bugzilla to perform administration, enter
            some descriptive text (with embedded HTML codes, if you'd like)
            into this box. Anyone who tries to use Bugzilla (including admins)
            will receive a page displaying this text. Users can neither log in
            nor log out while shutdownhtml is enabled.
          </para>

          <note>
            <para>
              Although regular log-in capability is disabled while 'shutdownhtml'
              is enabled, safeguards are in place to protect the unfortunate 
              admin who loses connection to Bugzilla. Should this happen to you,
              go directly to the <filename>editparams.cgi</filename> (by typing
              the URL in manually, if necessary). Doing this will prompt you to
              log in, and your name/password will be accepted here (but nowhere
              else). 
            </para>
          </note>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>
          movebugs
        </term>
        <listitem>
          <para>
            This option is an undocumented feature to allow moving bugs
            between separate Bugzilla installations.  You will need to understand
            the source code in order to use this feature.  Please consult
            <filename>movebugs.pl</filename> in your Bugzilla source tree for
            further documentation, such as it is.
          </para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>
          useqacontact
        </term>
        <listitem>
          <para>
            This allows you to define an email address for each component, 
            in addition to that of the default assignee, who will be sent
            carbon copies of incoming bugs.
          </para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>
          usestatuswhiteboard
        </term>
        <listitem>
          <para>
            This defines whether you wish to have a free-form, overwritable field
            associated with each bug. The advantage of the Status Whiteboard is
            that it can be deleted or modified with ease, and provides an
            easily-searchable field for indexing some bugs that have some trait
            in common.         
          </para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>
          whinedays
        </term>
        <listitem>
          <para>
            Set this to the number of days you want to let bugs go
            in the NEW or REOPENED state before notifying people they have
            untouched new bugs. If you do not plan to use this feature, simply 
            do not set up the whining cron job described in the installation
            instructions, or set this value to "0" (never whine).
          </para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>
          commenton*
        </term>
        <listitem>
          <para>
            All these fields allow you to dictate what changes can pass
            without comment, and which must have a comment from the
            person who changed them.  Often, administrators will allow
            users to add themselves to the CC list, accept bugs, or
            change the Status Whiteboard without adding a comment as to
            their reasons for the change, yet require that most other
            changes come with an explanation.
          </para>

          <para>
            Set the "commenton" options according to your site policy. It
            is a wise idea to require comments when users resolve, reassign, or
            reopen bugs at the very least. 
          </para>

          <note>
            <para>
              It is generally far better to require a developer comment
              when resolving bugs than not. Few things are more annoying to bug
              database users than having a developer mark a bug "fixed" without
              any comment as to what the fix was (or even that it was truly
              fixed!)
            </para>
          </note>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>
          supportwatchers
        </term>
        <listitem>
          <para>
            Turning on this option allows users to ask to receive copies 
            of bug mail sent to another user.  Watching a user with
            different group permissions is not a way to 'get around' the
            system; copied emails are still subject to the normal groupset
            permissions of a bug, and <quote>watchers</quote> will only be 
            copied on emails from bugs they would normally be allowed to view. 
          </para> 
        </listitem>
      </varlistentry>


      <varlistentry>
        <term>
          noresolveonopenblockers
        </term>
        <listitem>
          <para>
            This option will prevent users from resolving bugs as FIXED if
            they have unresolved dependencies. Only the FIXED resolution
            is affected. Users will be still able to resolve bugs to
            resolutions other than FIXED if they have unresolved dependent
            bugs.
          </para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>
          sendmailnow
        </term>
        <listitem>
          <para>
            When Bugzilla is using Sendmail older than 8.12, turning this option
            off will improve performance by not waiting for Sendmail to actually
            send mail.  If Sendmail 8.12 or later is being used, there is 
            nothing to gain by turning this off.  If another MTA is being used, 
            such as Postfix, then this option *must* be turned on (even if you 
            are using the fake sendmail executable that Postfix provides).
          </para>
        </listitem>
      </varlistentry>

    </variablelist>
  </section>

  <section id="useradmin">
    <title>User Administration</title>

    <section id="defaultuser">
      <title>Creating the Default User</title>

      <para>When you first run checksetup.pl after installing Bugzilla, it
      will prompt you for the administrative username (email address) and
      password for this "super user". If for some reason you delete
      the "super user" account, re-running checksetup.pl will again prompt
      you for this username and password.</para>

      <tip>
        <para>If you wish to add more administrative users, add them to 
        the "admin" group and, optionally, add edit the tweakparams, editusers,
        creategroups, editcomponents, and editkeywords groups to add the
        entire admin group to those groups.
        </para>
      </tip>
    </section>

    <section id="manageusers">
      <title>Managing Other Users</title>

      <section id="createnewusers">
        <title>Creating new users</title>

        <para>Your users can create their own user accounts by clicking the
        "New Account" link at the bottom of each page (assuming they
        aren't logged in as someone else already.) However, should you
        desire to create user accounts ahead of time, here is how you do
        it.</para>

        <orderedlist>
          <listitem>
            <para>After logging in, click the "Users" link at the footer of
            the query page, and then click "Add a new user".</para>
          </listitem>

          <listitem>
            <para>Fill out the form presented. This page is self-explanatory.
            When done, click "Submit".</para>

            <note>
              <para>Adding a user this way will 
              <emphasis>not</emphasis>

              send an email informing them of their username and password.
              While useful for creating dummy accounts (watchers which
              shuttle mail to another system, for instance, or email
              addresses which are a mailing list), in general it is
              preferable to log out and use the 
              <quote>New Account</quote>

              button to create users, as it will pre-populate all the
              required fields and also notify the user of her account name
              and password.</para>
            </note>
          </listitem>
        </orderedlist>
      </section>

      <section id="modifyusers">
        <title>Modifying Users</title>

        <para>To see a specific user, search for their login name
        in the box provided on the "Edit Users" page. To see all users, 
        leave the box blank.</para>

        <para>You can search in different ways the listbox to the right
        of the text entry box. You can match by 
        case-insensitive substring (the default),
        regular expression, or a 
        <emphasis>reverse</emphasis>
        regular expression match, which finds every user name which does NOT
        match the regular expression. (Please see
        the <command>man regexp</command>
        manual page for details on regular expression syntax.)
        </para>

        <para>Once you have found your user, you can change the following
        fields:</para>

        <itemizedlist>
          <listitem>
            <para>
            <emphasis>Login Name</emphasis>: 
            This is generally the user's full email address. However, if you
            have are using the emailsuffix Param, this may just be the user's
            login name. Note that users can now change their login names
            themselves (to any valid email address.)
            </para>
          </listitem>

          <listitem>
            <para>
            <emphasis>Real Name</emphasis>: The user's real name. Note that
            Bugzilla does not require this to create an account.</para>
          </listitem>

          <listitem>
            <para>
            <emphasis>Password</emphasis>: 
            You can change the user's password here. Users can automatically
            request a new password, so you shouldn't need to do this often.
            If you want to disable an account, see Disable Text below.
            </para>
          </listitem>

          <listitem>
            <para>
              <emphasis>Disable Text</emphasis>: 
              If you type anything in this box, including just a space, the
              user is prevented from logging in, or making any changes to 
              bugs via the web interface. 
              The HTML you type in this box is presented to the user when
              they attempt to perform these actions, and should explain
              why the account was disabled.
            </para>
            <para>
              Users with disabled accounts will continue to receive
              mail from Bugzilla; furthermore, they will not be able
              to log in themselves to change their own preferences and
              stop it. If you want an account (disabled or active) to
              stop receiving mail, add the account name (one account
              per line) to the file <filename>data/nomail</filename>.
            </para>
            <note>
              <para>
                Even users whose accounts have been disabled can still
                submit bugs via the e-mail gateway, if one exists.
                The e-mail gateway should <emphasis>not</emphasis> be
                enabled for secure installations of Bugzilla.
              </para>
            </note>
            <warning>
              <para>
                Don't disable all the administrator accounts!
              </para>
            </warning>
          </listitem>

          <listitem>
            <para>
            <emphasis>&lt;groupname&gt;</emphasis>: 
            If you have created some groups, e.g. "securitysensitive", then
            checkboxes will appear here to allow you to add users to, or
            remove them from, these groups.
            </para>
          </listitem>

          <listitem>
            <para>
            <emphasis>canconfirm</emphasis>: 
            This field is only used if you have enabled the "unconfirmed"
            status. If you enable this for a user,
            that user can then move bugs from "Unconfirmed" to a "Confirmed"
            status (e.g.: "New" status).</para>
          </listitem>

          <listitem>
            <para>
            <emphasis>creategroups</emphasis>: 
            This option will allow a user to create and destroy groups in
            Bugzilla.</para>
          </listitem>

          <listitem>
            <para>
            <emphasis>editbugs</emphasis>: 
            Unless a user has this bit set, they can only edit those bugs
            for which they are the assignee or the reporter. Even if this
            option is unchecked, users can still add comments to bugs.
            </para>
          </listitem>

          <listitem>
            <para>
            <emphasis>editcomponents</emphasis>: 
            This flag allows a user to create new products and components,
            as well as modify and destroy those that have no bugs associated
            with them. If a product or component has bugs associated with it,
            those bugs must be moved to a different product or component
            before Bugzilla will allow them to be destroyed.
            </para>
          </listitem>

          <listitem>
            <para>
            <emphasis>editkeywords</emphasis>: 
            If you use Bugzilla's keyword functionality, enabling this
            feature allows a user to create and destroy keywords. As always,
            the keywords for existing bugs containing the keyword the user
            wishes to destroy must be changed before Bugzilla will allow it
            to die.</para>
          </listitem>

          <listitem>
            <para>
            <emphasis>editusers</emphasis>: 
            This flag allows a user to do what you're doing right now: edit
            other users. This will allow those with the right to do so to
            remove administrator privileges from other users or grant them to
            themselves. Enable with care.</para>
          </listitem>


          <listitem>
            <para>
            <emphasis>tweakparams</emphasis>: 
            This flag allows a user to change Bugzilla's Params 
            (using <filename>editparams.cgi</filename>.)</para>
          </listitem>

          <listitem>
            <para>
            <emphasis>&lt;productname&gt;</emphasis>: 
            This allows an administrator to specify the products in which 
            a user can see bugs. The user must still have the 
            "editbugs" privilege to edit bugs in these products.</para>
          </listitem>
        </itemizedlist>
      </section>
      
      <section id="impersonatingusers">
        <title>Impersonating Users</title>
        
        <para>
        There may be times when an administrator would like to do something as
        another user.  The <command>sudo</command> feature may be used to do 
        this.
        </para>
        
        <note>
          <para>
          To use the sudo feature, you must be in the
          <emphasis>bz_sudoers</emphasis> group.  By default, all
          administrators are in this group.</para>
        </note>
        
        <para>
        If you have access to this feature, you may start a session by
        going to the Edit Users page, Searching for a user and clicking on 
        their login.  You should see a link below their login name titled 
        "Impersonate this user".  Click on the link.  This will take you 
        to a page where you will see a description of the feature and 
        instructions for using it.  After reading the text, simply 
        enter the login of the user you would like to impersonate, provide 
        a short message explaining why you are doing this, and press the 
        button.</para>
        
        <para>
        As long as you are using this feature, everything you do will be done 
        as if you were logged in as the user you are impersonating.</para>
        
        <warning>
          <para>
          The user you are impersonating will not be told about what you are 
          doing.  If you do anything that results in mail being sent, that 
          mail will appear to be from the user you are impersonating.  You 
          should be extremely careful while using this feature.</para>
        </warning>
      </section>
    </section>
  </section>

  <section id="products">
    <title>Products</title>

    <para>
    <glossterm linkend="gloss-product" baseform="product">
    Products</glossterm>

    are the broadest category in Bugzilla, and tend to represent real-world
    shipping products. E.g. if your company makes computer games, 
    you should have one product per game, perhaps a "Common" product for 
    units of technology used in multiple games, and maybe a few special
     products (Website, Administration...)</para>

    <para>Many of Bugzilla's settings are configurable on a per-product
    basis. The number of "votes" available to users is set per-product, 
    as is the number of votes
    required to move a bug automatically from the UNCONFIRMED status to the
    NEW status.</para>

    <para>To create a new product:</para>

    <orderedlist>
      <listitem>
        <para>Select "products" from the footer</para>

      </listitem>

      <listitem>
        <para>Select the "Add" link in the bottom right</para>
      </listitem>

      <listitem>
        <para>Enter the name of the product and a description. The
        Description field may contain HTML.</para>
      </listitem>
    </orderedlist>

    <para>Don't worry about the "Closed for bug entry", "Maximum Votes
    per person", "Maximum votes a person can put on a single bug",
    "Number of votes a bug in this Product needs to automatically get out
    of the UNCOMFIRMED state", and "Version" options yet. We'll cover
    those in a few moments.
    </para>
  </section>

  <section id="components">
    <title>Components</title>

    <para>Components are subsections of a Product. E.g. the computer game 
    you are designing may have a "UI"
    component, an "API" component, a "Sound System" component, and a
    "Plugins" component, each overseen by a different programmer. It
    often makes sense to divide Components in Bugzilla according to the
    natural divisions of responsibility within your Product or
    company.</para>

    <para>
    Each component has a default assignee and (if you turned it on in the parameters),
    a QA Contact. The default assignee should be the primary person who fixes bugs in
    that component. The QA Contact should be the person who will ensure
    these bugs are completely fixed. The Assignee, QA Contact, and Reporter
    will get email when new bugs are created in this Component and when
    these bugs change. Default Assignee and Default QA Contact fields only
    dictate the 
    <emphasis>default assignments</emphasis>; 
    these can be changed on bug submission, or at any later point in
    a bug's life.</para>

    <para>To create a new Component:</para>

    <orderedlist>
      <listitem>
        <para>Select the "Edit components" link from the "Edit product"
        page</para>
      </listitem>

      <listitem>
        <para>Select the "Add" link in the bottom right.</para>
      </listitem>

      <listitem>
        <para>Fill out the "Component" field, a short "Description", 
        the "Default Assignee" and "Default QA Contact" (if enabled.) 
        The Component and Description fields may contain HTML; 
        the "Default Assignee" field must be a login name
        already existing in the database. 
        </para>
      </listitem>
    </orderedlist>
  </section>

  <section id="versions">
    <title>Versions</title>

    <para>Versions are the revisions of the product, such as "Flinders
    3.1", "Flinders 95", and "Flinders 2000". Version is not a multi-select
    field; the usual practice is to select the earliest version known to have
    the bug.
    </para>

    <para>To create and edit Versions:</para>

    <orderedlist>
      <listitem>
        <para>From the "Edit product" screen, select "Edit Versions"</para>
      </listitem>

      <listitem>
        <para>You will notice that the product already has the default
        version "undefined". Click the "Add" link in the bottom right.</para>
      </listitem>

      <listitem>
        <para>Enter the name of the Version. This field takes text only. 
        Then click the "Add" button.</para>
      </listitem>

    </orderedlist>
  </section>

  <section id="milestones">
    <title>Milestones</title>

    <para>Milestones are "targets" that you plan to get a bug fixed by. For
    example, you have a bug that you plan to fix for your 3.0 release, it
    would be assigned the milestone of 3.0.</para>

    <note>
      <para>Milestone options will only appear for a Product if you turned
      on the "usetargetmilestone" Param in the "Edit Parameters" screen.
      </para>
    </note>

    <para>To create new Milestones, set Default Milestones, and set
    Milestone URL:</para>

    <orderedlist>
      <listitem>
        <para>Select "Edit milestones" from the "Edit product" page.</para>
      </listitem>

      <listitem>
        <para>Select "Add" in the bottom right corner.
        text</para>
      </listitem>

      <listitem>
        <para>Enter the name of the Milestone in the "Milestone" field. You
        can optionally set the "sortkey", which is a positive or negative
        number (-32768 to 32767) that defines where in the list this particular
        milestone appears. This is because milestones often do not 
        occur in alphanumeric order For example, "Future" might be
        after "Release 1.2". Select "Add".</para>
      </listitem>

      <listitem>
        <para>From the Edit product screen, you can enter the URL of a 
        page which gives information about your milestones and what
        they mean. </para>
      </listitem>
    </orderedlist>
  </section>
  
 <section id="flags-overview">
   <title>Flags</title>
   
   <para>
     Flags are a way to attach a specific status to a bug or attachment, 
     either <quote>+</quote> or <quote>-</quote>. The meaning of these symbols depends on the text
     the flag itself, but contextually they could mean pass/fail, 
     accept/reject, approved/denied, or even a simple yes/no. If your site
     allows requestable flags, then users may set a flag to <quote>?</quote> as a 
     request to another user that they look at the bug/attachment, and set
     the flag to its correct status.
   </para>

   <section id="flags-simpleexample">
     <title>A Simple Example</title>

     <para>
       A developer might want to ask their manager, 
       <quote>Should we fix this bug before we release version 2.0?</quote> 
       They might want to do this for a <emphasis>lot</emphasis> of bugs,
       so it would be nice to streamline the process...
     </para>
     <para>
       In Bugzilla, it would work this way:
       <orderedlist>
         <listitem>
           <para>
             The Bugzilla administrator creates a flag type called 
             <quote>blocking2.0</quote> that shows up on all bugs in 
             your product.
           </para>
 
           <para>
             It shows up on the <quote>Show Bug</quote> screen
             as the text <quote>blocking2.0</quote> with a drop-down box next
             to it. The drop-down box contains four values: an empty space,
             <quote>?</quote>, <quote>-</quote>, and <quote>+</quote>.
           </para>
         </listitem>
         <listitem>
           <para>The developer sets the flag to <quote>?</quote>.</para>
         </listitem>
         <listitem>
           <para>
             The manager sees the <computeroutput>blocking2.0</computeroutput>
             flag with a <quote>?</quote> value.
           </para>
         </listitem>
         <listitem>
           <para>
             If the manager thinks the feature should go into the product
             before version 2.0 can be released, he sets the flag to 
             <quote>+</quote>. Otherwise, he sets it to <quote>-</quote>.
           </para>
         </listitem>
         <listitem>
           <para>
             Now, every Bugzilla user who looks at the bug knows whether or 
             not the bug needs to be fixed before release of version 2.0.
           </para>
         </listitem>
       </orderedlist>
     </para>

   </section>

   <section id="flags-about">
     <title>About Flags</title>

     <section id="flag-values">
       <title>Values</title>
       <para>
         Flags can have three values:
         <variablelist>
           <varlistentry>
             <term><computeroutput>?</computeroutput></term>
             <listitem><simpara>
               A user is requesting that a status be set. (Think of it as 'A question is being asked'.)
             </simpara></listitem>
           </varlistentry>
           <varlistentry>
             <term><computeroutput>-</computeroutput></term>
             <listitem><simpara>
               The status has been set negatively. (The question has been answered <quote>no</quote>.)
             </simpara></listitem>
           </varlistentry>
           <varlistentry>
             <term><computeroutput>+</computeroutput></term>
             <listitem><simpara>
               The status has been set positively.
               (The question has been answered <quote>yes</quote>.)
             </simpara></listitem>
           </varlistentry>
         </variablelist>
       </para>
       <para>
         Actually, there's a fourth value a flag can have -- 
         <quote>unset</quote> -- which shows up as a blank space. This 
         just means that nobody has expressed an opinion (or asked
         someone else to express an opinion) about this bug or attachment.
       </para>
     </section>
   </section>

   <section id="flag-askto">
     <title>Using flag requests</title>
     <para>
       If a flag has been defined as 'requestable', 
       users are allowed to set the flag's status to <quote>?</quote>.
       This status indicates that someone (aka <quote>the requester</quote> is asking
       for someone else to set the flag to either <quote>+</quote> or <quote>-</quote>.
     </para>
     <para>
       If a flag has been defined as 'specifically requestable', 
       a text box will appear next to the flag into which the requester may
       enter a Bugzilla username. That named person (aka <quote>the requestee</quote>)
       will receive an email notifying them of the request, and pointing them
       to the bug/attachment in question.
     </para>
     <para>
       If a flag has <emphasis>not</emphasis> been defined as 'specifically requestable',
       then no such text-box will appear. A request to set this flag cannot be made of
       any specific individual, but must be asked <quote>to the wind</quote>.
       A requester may <quote>ask the wind</quote> on any flag simply by leaving the text-box blank.
     </para>
   </section>

   <section id="flag-types">
     <title>Two Types of Flags</title>
    
     <para>
       Flags can go in two places: on an attachment, or on a bug.
     </para>

     <section id="flag-type-attachment">
       <title>Attachment Flags</title>
      
       <para>
         Attachment flags are used to ask a question about a specific 
         attachment on a bug.
       </para>
       <para>
         Many Bugzilla installations use this to 
         request that one developer <quote>review</quote> another 
         developer's code before they check it in. They attach the code to
         a bug report, and then set a flag on that attachment called
         <quote>review</quote> to 
         <computeroutput>review?boss@domain.com</computeroutput>.
         boss@domain.com is then notified by email that
         he has to check out that attachment and approve it or deny it.
       </para>

       <para>
         For a Bugzilla user, attachment flags show up in two 
         places:
         <orderedlist>
           <listitem>
             <para>
               On the list of attachments in the <quote>Show Bug</quote>
               screen, you can see the current state of any flags that
               have been set to ?, +, or -. You can see who asked about 
               the flag (the requester), and who is being asked (the 
               requestee).
             </para>
           </listitem>
           <listitem>
             <para>
              When you <quote>Edit</quote> an attachment, you can 
              see any settable flag, along with any flags that have 
              already been set. This <quote>Edit Attachment</quote> 
              screen is where you set flags to ?, -, +, or unset them.
             </para>
           </listitem>
         </orderedlist>
       </para>

     </section>

     <section id="flag-type-bug">
       <title>Bug Flags</title>

       <para>
         Bug flags are used to set a status on the bug itself. You can 
         see Bug Flags in the <quote>Show Bug</quote> screen 
         (<filename>editbug.cgi</filename>).
       </para>
       <para>
         Only users with the ability to edit the bug may 
         set flags on bugs. This includes the assignee, reporter, and 
         any user with the <computeroutput>editbugs</computeroutput> 
         permission.
       </para>
     </section>

   </section>

   <section id="flags-admin">
     <title>Administering Flags</title>

     <para>
       If you have the <quote>editcomponents</quote> permission, you will
       have <quote>Edit: ... | Flags | ...</quote> in your page footer.
       Clicking on that link will bring you to the <quote>Administer 
       Flag Types</quote> page. Here, you can select whether you want 
       to create (or edit) a Bug flag, or an Attachment flag.
     </para>
     <para>
       No matter which you choose, the interface is the same, so we'll 
       just go over it once.
     </para>

     <section id="flags-create">
       <title>Creating a Flag</title>
       
        <para>
          When you click on the <quote>Create a Flag Type for...</quote>
          link, you will be presented with a form. Here is what the fields in 
          the form mean:
        </para>

        <section id="flags-create-field-name">
          <title>Name</title>
          <para>
            This is the name of the flag. This will be displayed 
            to Bugzilla users who are looking at or setting the flag. 
            The name may consist of any valid Unicode character. 
          </para>
        </section>

        <section id="flags-create-field-description">
          <title>Description</title>
          <para>
            This describes the flag in more detail. At present, this doesn't
            show up anywhere helpful; ideally, it would be nice to have
            it show up as a tooltip. This field 
            can be as long as you like, and can contain any character you want.
          </para>
        </section>

        <section id="flags-create-field-category">
          <title>Category</title>

          <para>
            Default behaviour for a newly-created flag is to appear on
            products and all components, which is why <quote>__Any__:__Any__</quote>
            is already entered in the <quote>Inclusions</quote> box.
            If this is not your desired behaviour, you must either set some
            exclusions (for products on which you don't want the flag to appear),
            or you must remove <quote>__Any__:__Any__</quote> from the Inclusions box
            and define products/components specifically for this flag.
          </para>

          <para>
            To create an Inclusion, select a Product from the top drop-down box.
            You may also select a specific component from the bottom drop-down box.
            (Setting <quote>__Any__</quote> for Product translates to, 
            <quote>all the products in this Bugzilla</quote>.
            Selecting  <quote>__Any__</quote> in the Component field means
            <quote>all components in the selected product.</quote>) 
            Selections made, press <quote>Include</quote>, and your
            Product/Component pairing will show up in the <quote>Inclusions</quote> box on the right.
          </para>

          <para>
            To create an Exclusion, the process is the same; select a Product from the
            top drop-down box, select a specific component if you want one, and press
            <quote>Exclude</quote>. The Product/Component pairing will show up in the 
            <quote>Exclusions</quote> box on the right.
          </para>

          <para>
            This flag <emphasis>will</emphasis> and <emphasis>can</emphasis> be set for any
            products/components that appearing in the <quote>Inclusions</quote> box 
            (or which fall under the appropriate <quote>__Any__</quote>). 
            This flag <emphasis>will not</emphasis> appear (and therefore cannot be set) on
            any products appearing in the <quote>Exclusions</quote> box.
            <emphasis> IMPORTANT: Exclusions override inclusions.</emphasis>
          </para>

          <para>
            You may select a Product without selecting a specific Component,
            but it is illegal to select a Component without a Product, or to select a
            Component that does not belong to the named Product. Doing so as of
            this writing (2.18rc3) will raise an error... even if all your products
            have a component by that name.
          </para>

          <para><emphasis>Example:</emphasis> Let's say you have a product called 
            <quote>Jet Plane</quote> that has thousands of components. You want
            to be able to ask if a problem should be fixed in the next model of 
            plane you release. We'll call the flag <quote>fixInNext</quote>.
            But, there's one component in <quote>Jet Plane,</quote> 
            called <quote>Pilot.</quote> It doesn't make sense to release a 
            new pilot, so you don't want to have the flag show up in that component.
            So, you include <quote>Jet Plane:__Any__</quote> and you exclude 
            <quote>Jet Plane:Pilot</quote>.
          </para>
        </section>

        <section id="flags-create-field-sortkey">
          <title>Sort Key</title>
          <para>
            Flags normally show up in alphabetical order. If you want them to 
            show up in a different order, you can use this key set the order on each flag. 
            Flags with a lower sort key will appear before flags with a higher
            sort key. Flags that have the same sort key will be sorted alphabetically,
            but they will still be after flags with a lower sort key, and before flags
            with a higher sort key.
          </para>
          <para>
            <emphasis>Example:</emphasis> I have AFlag (Sort Key 100), BFlag (Sort Key 10), 
            CFlag (Sort Key 10), and DFlag (Sort Key 1). These show up in
            the order: DFlag, BFlag, CFlag, AFlag.
          </para>
        </section>

        <section id="flags-create-field-active">
          <title>Active</title>
          <para>
            Sometimes, you might want to keep old flag information in the 
            Bugzilla database, but stop users from setting any new flags of this type.
            To do this, uncheck <quote>active</quote>. Deactivated
            flags will still show up in the UI if they are ?, +, or -, but they
            may only be cleared (unset), and cannot be changed to a new value.
            Once a deactivated flag is cleared, it will completely disappear from a 
            bug/attachment, and cannot be set again.
          </para>
        </section>

        <section id="flags-create-field-requestable">
          <title>Requestable</title>
          <para>
            New flags are, by default, <quote>requestable</quote>, meaning that they
            offer users the <quote>?</quote> option, as well as <quote>+</quote>
            and <quote>-</quote>.
            To remove the ? option, uncheck <quote>requestable</quote>.
          </para>
        </section>

        <section id="flags-create-field-cclist">
          <title>CC List</title>

          <para>
            If you want certain users to be notified every time this flag is 
            set to ?, -, +, or unset, add them here. This is a comma-separated 
            list of email addresses that need not be restricted to Bugzilla usernames..
          </para>
        </section>

        <section id="flags-create-field-specific">
          <title>Specifically Requestable</title>
          <para>
            By default this box is checked for new flags, meaning that users may make
            flag requests of specific individuals. Unchecking this box will remove the
            text box next to a flag; if it is still requestable, then requests may
            only be made <quote>to the wind.</quote> Removing this after specific
            requests have been made will not remove those requests; that data will
            stay in the database (though it will no longer appear to the user).
          </para>
        </section>

        <section id="flags-create-field-multiplicable">
          <title>Multiplicable</title>
          <para>
            Any flag with <quote>Multiplicable</quote> set (default for new flags is 'on')
            may be set more than once. After being set once, an unset flag
            of the same type will appear below it with <quote>addl.</quote> (short for 
            <quote>additional</quote>) before the name. There is no limit to the number of
            times a Multiplicable flags may be set on the same bug/attachment.
          </para>
        </section>

      </section> <!-- flags-create -->

      <section id="flags-delete">
        <title>Deleting a Flag</title>

        <para>
          When you are at the <quote>Administer Flag Types</quote> screen,
          you will be presented with a list of Bug flags and a list of Attachment
          Flags.
        </para>
        <para>
          To delete a flag, click on the <quote>Delete</quote> link next to
          the flag description.
        </para>
        <warning>
          <para>
            Once you delete a flag, it is <emphasis>gone</emphasis> from
            your Bugzilla. All the data for that flag will be deleted.
            Everywhere that flag was set, it will disappear,
            and you cannot get that data back. If you want to keep flag data,
            but don't want anybody to set any new flags or change current flags,
            unset <quote>active</quote> in the flag Edit form.
          </para>
        </warning>
      </section>

      <section id="flags-edit">
        <title>Editing a Flag</title>
        <para>
          To edit a flag's properties, just click on the <quote>Edit</quote>
          link next to the flag's description. That will take you to the same
          form described in the <quote>Creating a Flag</quote> section.
        </para>
      </section>

    </section> <!-- flags-admin -->

    <!-- XXX We should add a "Uses of Flags" section, here, with examples. -->

  </section> <!-- flags -->
   
  <section id="voting">
    <title>Voting</title>

    <para>Voting allows users to be given a pot of votes which they can allocate
    to bugs, to indicate that they'd like them fixed. 
    This allows developers to gauge
    user need for a particular enhancement or bugfix. By allowing bugs with
    a certain number of votes to automatically move from "UNCONFIRMED" to
    "NEW", users of the bug system can help high-priority bugs garner
    attention so they don't sit for a long time awaiting triage.</para>

    <para>To modify Voting settings:</para>

    <orderedlist>
      <listitem>
        <para>Navigate to the "Edit product" screen for the Product you
        wish to modify</para>
      </listitem>

      <listitem>
        <para><emphasis>Maximum Votes per person</emphasis>:
        Setting this field to "0" disables voting.</para>
      </listitem>

      <listitem>
        <para><emphasis>Maximum Votes a person can put on a single
         bug</emphasis>: 
         It should probably be some number lower than the
        "Maximum votes per person". Don't set this field to "0" if
        "Maximum votes per person" is non-zero; that doesn't make
        any sense.</para>
      </listitem>

      <listitem>
        <para><emphasis>Number of votes a bug in this product needs to
        automatically get out of the UNCONFIRMED state</emphasis>: 
        Setting this field to "0" disables the automatic move of
        bugs from UNCONFIRMED to NEW. 
        </para>
      </listitem>

      <listitem>
        <para>Once you have adjusted the values to your preference, click
        "Update".</para>
      </listitem>
    </orderedlist>
  </section>

  <section id="quips">
    <title>Quips</title>

    <para>
      Quips are small text messages that can be configured to appear
      next to search results. A Bugzilla installation can have its own specific
      quips. Whenever a quip needs to be displayed, a random selection
      is made from the pool of already existing quips.
    </para>
  
    <para>
      Quips are controlled by the <emphasis>enablequips</emphasis> parameter.
      It has several possible values: on, approved, frozen or off.
      In order to enable quips approval you need to set this parameter
      to "approved". In this way, users are free to submit quips for
      addition but an administrator must explicitly approve them before
      they are actually used.
    </para>

    <para>
      In order to see the user interface for the quips, it is enough to click
      on a quip when it is displayed together with the search results. Or
      it can be seen directly in the browser by visiting the quips.cgi URL
      (prefixed with the usual web location of the Bugzilla installation).
      Once the quip interface is displayed, it is enough to click the
      "view and edit the whole quip list" in order to see the administration
      page. A page with all the quips available in the database will
      be displayed.
    </para>

    <para>
      Next to each tip there is a checkbox, under the
      "Approved" column. Quips who have this checkbox checked are
      already approved and will appear next to the search results.
      The ones that have it unchecked are still preserved in the
      database but they will not appear on search results pages.
      User submitted quips have initially the checkbox unchecked.
    </para>
  
    <para>
      Also, there is a delete link next to each quip,
      which can be used in order to permanently delete a quip.
    </para>
  </section>

  <section id="groups">
    <title>Groups and Group Security</title>

    <para>Groups allow the administrator
    to isolate bugs or products that should only be seen by certain people.
    The association between products and groups is controlled from
    the product edit page under <quote>Edit Group Controls.</quote>
    </para>

    <para>
    If the makeproductgroups param is on, a new group will be automatically
    created for every new product. It is primarily available for backward
    compatibility with older sites. 
    </para>
    <para>
      Note that group permissions are such that you need to be a member
      of <emphasis>all</emphasis> the groups a bug is in, for whatever
      reason, to see that bug. Similarly, you must be a member 
      of <emphasis>all</emphasis> of the entry groups for a product 
      to add bugs to a product and you must be a member 
      of <emphasis>all</emphasis> of the canedit groups for a product
      in order to make <emphasis>any</emphasis> change to bugs in that
      product.
    </para>    
    <note>
      <para>
        By default, bugs can also be seen by the Assignee, the Reporter, and 
        by everyone on the CC List, regardless of whether or not the bug would 
        typically be viewable by them. Visibility to the Reporter and CC List can 
        be overridden (on a per-bug basis) by bringing up the bug, finding the 
        section that starts with <quote>Users in the roles selected below...</quote>
        and un-checking the box next to either 'Reporter' or 'CC List' (or both).
      </para>
    </note>
    <section>
      <title>Creating Groups</title>
      <para>To create Groups:</para>
  
      <orderedlist>
        <listitem>
          <para>Select the <quote>groups</quote>
          link in the footer.</para>
        </listitem>
  
        <listitem>
          <para>Take a moment to understand the instructions on the <quote>Edit
          Groups</quote> screen, then select the <quote>Add Group</quote> link.</para>
        </listitem>
  
        <listitem>
          <para>Fill out the <quote>Group</quote>, <quote>Description</quote>, 
           and <quote>User RegExp</quote> fields. 
           <quote>User RegExp</quote> allows you to automatically
           place all users who fulfill the Regular Expression into the new group. 
           When you have finished, click <quote>Add</quote>.</para>
           <para>Users whose email addresses match the regular expression
           will automatically be members of the group as long as their 
           email addresses continue to match the regular expression.</para>
           <note>
             <para>This is a change from 2.16 where the regular expression
             resulted in a user acquiring permanent membership in a group.
             To remove a user from a group the user was in due to a regular
             expression in version 2.16 or earlier, the user must be explicitly
             removed from the group. This can easily be done by pressing
             buttons named 'Remove Memberships' or 'Remove Memberships
             included in regular expression' under the table.</para>
           </note>
           <warning>
             <para>If specifying a domain in the regexp, make sure you end
             the regexp with a $. Otherwise, when granting access to 
             "@mycompany\.com", you will allow access to 
             'badperson@mycompany.com.cracker.net'. You need to use 
             '@mycompany\.com$' as the regexp.</para>
           </warning>
        </listitem>
        <listitem>
          <para>If you plan to use this group to directly control
          access to bugs, check the "use for bugs" box. Groups
          not used for bugs are still useful because other groups
          can include the group as a whole.</para>
        </listitem>
        <listitem>
          <para>After you add your new group, edit the new group.  On the
          edit page, you can specify other groups that should be included
          in this group and which groups should be permitted to add and delete
          users from this group.</para>
        </listitem>
      </orderedlist>
  
    </section>
    <section>
      <title>Assigning Users to Groups</title>
      <para>Users can become a member of a group in several ways.</para>
      <orderedlist>
        <listitem>
          <para>The user can be explicitly placed in the group by editing
          the user's own profile</para>
        </listitem>
        <listitem>
          <para>The group can include another group of which the user is
          a member.</para>
        </listitem>
        <listitem>
          <para>The user's email address can match a regular expression
          that the group specifies to automatically grant membership to
          the group.</para>
        </listitem>
      </orderedlist>
    </section>
    
    <section>
      <title>Assigning Group Controls to Products</title>
      <para>
      On the product edit page, there is a page to edit the 
      <quote>Group Controls</quote> 
      for a product. This  allows you to 
      configure how a group relates to the product. 
      Groups may be applicable, default, 
      and mandatory as well as used to control entry 
      or used to make bugs in the product
      totally read-only unless the group restrictions are met. 
      </para>
      
      <para>
      For each group, it is possible to specify if membership in that
      group is...
      </para>
      <orderedlist>
        <listitem>
          <para>
          required for bug entry, 
          </para>
        </listitem>
        <listitem>
          <para>
          Not applicable to this product(NA),
          a possible restriction for a member of the 
          group to place on a bug in this product(Shown),
          a default restriction for a member of the 
          group to place on a bug in this product(Default),
          or a mandatory restriction to be placed on bugs 
          in this product(Mandatory).
          </para>
        </listitem>
        <listitem>
          <para>
          Not applicable by non-members to this product(NA),
          a possible restriction for a non-member of the 
          group to place on a bug in this product(Shown),
          a default restriction for a non-member of the 
          group to place on a bug in this product(Default),
          or a mandatory restriction to be placed on bugs 
          in this product when entered by a non-member(Mandatory).
          </para>
        </listitem>
        <listitem>
          <para>
          required in order to make <emphasis>any</emphasis> change
          to bugs in this product <emphasis>including comments.</emphasis>
          </para>
        </listitem>
      </orderedlist>
      <para>These controls are often described in this order, so a 
      product that requires a user to be a member of group "foo" 
      to enter a bug and then requires that the bug stay restricted
      to group "foo" at all times and that only members of group "foo"
      can edit the bug even if they otherwise could see the bug would 
      have its controls summarized by...</para>
      <programlisting> 
foo: ENTRY, MANDATORY/MANDATORY, CANEDIT
      </programlisting>
      
    </section>
    <section>
    <title>Common Applications of Group Controls</title>
      <section>
      <title>General User Access With Security Group</title>
      <para>To permit any user to file bugs in each product (A, B, C...) 
      and to permit any user to submit those bugs into a security
      group....</para>
      <programlisting> 
Product A...
security: SHOWN/SHOWN
Product B...
security: SHOWN/SHOWN
Product C...
security: SHOWN/SHOWN
      </programlisting>
      </section>
      <section>
      <title>General User Access With A Security Product</title>
      <para>To permit any user to file bugs in a Security product
      while keeping those bugs from becoming visible to anyone
      outside the securityworkers group unless a member of the
      securityworkers group removes that restriction....</para>
      <programlisting> 
Product Security...
securityworkers: DEFAULT/MANDATORY
      </programlisting>
      </section>
      <section>
      <title>Product Isolation With Common Group</title>
      <para>To permit users of product A to access the bugs for
      product A, users of product B to access product B, and support
      staff to access both, 3 groups are needed</para>
      <orderedlist>
        <listitem>
          <para>Support: Contains members of the support staff.</para>
        </listitem>
        <listitem>
          <para>AccessA: Contains users of product A and the Support group.</para>
        </listitem>
        <listitem>
          <para>AccessB: Contains users of product B and the Support group.</para>
        </listitem>
      </orderedlist>
      <para>Once these 3 groups are defined, the products group controls
      can be set to..</para>
      <programlisting>
Product A...
AccessA: ENTRY, MANDATORY/MANDATORY
Product B...
AccessB: ENTRY, MANDATORY/MANDATORY
      </programlisting>
      <para>Optionally, the support group could be permitted to make
      bugs inaccessible to the users and could be permitted to publish
      bugs relevant to all users in a common product that is read-only
      to anyone outside the support group. That configuration could
      be...</para>
      <programlisting>
Product A...
AccessA: ENTRY, MANDATORY/MANDATORY
Support: SHOWN/NA
Product B...
AccessB: ENTRY, MANDATORY/MANDATORY
Support: SHOWN/NA
Product Common...
Support: ENTRY, DEFAULT/MANDATORY, CANEDIT
      </programlisting>
      </section>
    </section>
  </section>

  <section id="upgrading">
    <title>Upgrading to New Releases</title>

    <para>
      Upgrading Bugzilla is something we all want to do from time to time,
      be it to get new features or pick up the latest security fix. How easy
      it is to update depends on a few factors:
    </para>

    <itemizedlist>
      <listitem>
        <para>
          If the new version is a revision or a new point release
        </para>
      </listitem>
      <listitem>
        <para>
          How many local changes (if any) have been made
        </para>
      </listitem>
    </itemizedlist>

    <section id="upgrading-version-defns">
      <title>Version Definitions</title>

      <para>
        Bugzilla displays the version you are using at the top of most
        pages you load. It will look something like '2.16.7' or '2.18rc3'
        or '2.19.1+'. The first number in this series is the Major Version.
        This does not change very often (that is to say, almost never);
        Bugzilla was 1.x.x when it was first created, and went to 2.x.x
        when it was re-written in perl in Sept 1998. If/When the major version
        is changed to 3.x.x, it will signify a significant structural change
        and will be accompanied by much fanfare and many instructions on
        how to upgrade, including a revision to this page. :)
      </para>

      <para>
        The second number in the version is called the 'minor number', and
        a release that changes the minor number is called a 'point release'.
        An even number in this position (2.14, 2.16, 2.18, 2.20, etc.)
        represents a stable version, while an odd number (2.17, 2.19, etc.)
        represents a development version. In the past, stable point releases
        were feature-based, coming when certain enhancements had been
        completed, or the Bugzilla development team felt that enough
        progress had been made overall. As of version 2.18, however,
        Bugzilla has moved to a time-based release schedule; current plans
        are to create a stable point release every 6 months or so after
        2.18 is deployed.
      </para>

      <para>
        The third number in the Bugzilla version represents a bugfix version.
        Bugfix Revisions are normally released only to address security
        vulnerabilities; in the future, it is likely that the Bugzilla
        development team will back-port bugfixes in a new point release to
        the old point release for a limited period. Once enough of these
        bugfixes have accumulated (or a new security vulnerability is
        identified and closed), a bugfix release will be made. As an 
        example, 2.16.6 was a bugfix release, and improved on 2.16.5.
      </para>

      <note>
        <para>
          When reading version numbers, everything separated by a point ('.')
          should be read as a single number. It is <emphasis>not</emphasis>
          the same as decimal. 2.14 is newer than 2.8 because minor version
          14 is greater than minor version 8. 2.24.11 would be newer than
          2.24.9 (because bugfix 11 is greater than bugfix 9. This is
          confusing to some people who aren't used to dealing with software.
        </para>
      </note>
    </section>

    <section id="upgrading-methods">
    <title>Upgrading - Methods and Procedure</title>
      <para>
        There are three different ways to upgrade your installation.
      </para>

      <orderedlist>
        <listitem>
          <para>
            Using CVS (<xref linkend="upgrade-cvs"/>)
          </para>
        </listitem>
        <listitem>
          <para>
            Downloading a new tarball (<xref linkend="upgrade-tarball"/>)
          </para>
        </listitem>
        <listitem>
          <para>
            Applying the relevant patches (<xref linkend="upgrade-patches"/>)
          </para>
        </listitem>
      </orderedlist>

      <para>
        Each of these options has its own pros and cons; the one that's
        right for you depends on how long it has been since you last
        installed, the degree to which you have customized your installation,
        and/or your network configuration. (Some discussion of the various
        methods of updating compared with degree and methods of local
        customization can be found in <xref linkend="template-method"/>.)
      </para>

      <para>
        The larger the jump you are trying to make, the more difficult it
        is going to be to upgrade if you have made local customizations.
        Upgrading from 2.18 to 2.18.1 should be fairly painless even if
        you are heavily customized, but going from 2.14 to 2.18 is going
        to mean a fair bit of work re-writing your local changes to use
        the new files, logic, templates, etc. If you have done no local
        changes at all, however, then upgrading should be approximately
        the same amount of work regardless of how long it has been since
        your version was released.
      </para>

      <warning>
        <para>
          Upgrading is a one-way process. You should backup your database
          and current Bugzilla directory before attempting the upgrade. If
          you wish to revert to the old Bugzilla version for any reason, you
          will have to restore from these backups.
        </para>
      </warning>

      <para>
        The examples in the following sections are written as though the
        user were updating to version 2.18.1, but the procedures are the
        same regardless of whether one is updating to a new point release
        or simply trying to obtain a new bugfix release. Also, in the
        examples the user's Bugzilla installation is found at
        <filename>/var/www/html/bugzilla</filename>. If that is not the
        same as the location of your Bugzilla installation, simply
        substitute the proper paths where appropriate.
      </para>

      <section id="upgrade-cvs">
      <title>Upgrading using CVS</title>

        <para>
          Every release of Bugzilla, whether it is a point release or a bugfix,
          is tagged in CVS.  Also, every tarball that has been distributed since
          version 2.12 has been created in such a way that it can be used with
          CVS once it is unpacked. Doing so, however, requires that you are able
          to access cvs-mirror.mozilla.org on port 2401, which may not be an
          option or a possibility for some users, especially those behind a
          highly restrictive firewall.
        </para>

        <tip>
          <para>
            If you can, updating using CVS is probably the most painless
            method, especially if you have a lot of local changes.
          </para>
        </tip>

        <para>
          The following shows the sequence of commands needed to update a
          Bugzilla installation via CVS, and a typical series of results.
        </para>

        <programlisting>
bash$ <command>cd /var/www/html/bugzilla</command>
bash$ <command>cvs login</command>
Logging in to :pserver:anonymous@cvs-mirror.mozilla.org:2401/cvsroot
CVS password: <emphasis>('anonymous', or just leave it blank)</emphasis>
bash$ <command>cvs -q update -r BUGZILLA-2_18_1 -dP</command>
P checksetup.pl
P collectstats.pl
P globals.pl
P docs/rel_notes.txt
P template/en/default/list/quips.html.tmpl
<emphasis>(etc.)</emphasis>
        </programlisting>

        <caution>
          <para>
            If a line in the output from <command>cvs update</command> begins
            with a <computeroutput>C</computeroutput>, then that represents a
            file with local changes that CVS was unable to properly merge. You
            need to resolve these conflicts manually before Bugzilla (or at
            least the portion using that file) will be usable.
          </para>
        </caution>
      </section>

      <section id="upgrade-tarball">
        <title>Upgrading using the tarball</title>

        <para>
          If you are unable (or unwilling) to use CVS, another option that's
          always available is to obtain the latest tarball from the <ulink
          url="http://www.bugzilla.org/download/">Download Page</ulink> and 
          create a new Bugzilla installation from that.
        </para>

        <para>
          This sequence of commands shows how to get the tarball from the
          command-line; it is also possible to download it from the site
          directly in a web browser. If you go that route, save the file
          to the <filename class="directory">/var/www/html</filename>
          directory (or its equivalent, if you use something else) and 
          omit the first three lines of the example.
        </para>

        <programlisting>
bash$ <command>cd /var/www/html</command>
bash$ <command>wget ftp://ftp.mozilla.org/pub/mozilla.org/webtools/bugzilla-2.18.1.tar.gz</command>
<emphasis>(Output omitted)</emphasis>
bash$ <command>tar xzvf bugzilla-2.18.1.tar.gz</command>
bugzilla-2.18.1/
bugzilla-2.18.1/.cvsignore
bugzilla-2.18.1/1x1.gif
<emphasis>(Output truncated)</emphasis>
bash$ <command>cd bugzilla-2.18.1</command>
bash$ <command>cp ../bugzilla/localconfig* .</command>
bash$ <command>cp -r ../bugzilla/data .</command>
bash$ <command>cd ..</command>
bash$ <command>mv bugzilla bugzilla.old</command>
bash$ <command>mv bugzilla-2.18.1 bugzilla</command>
        </programlisting>

        <warning>
          <para>
            The <command>cp</command> commands both end with periods which
            is a very important detail, it tells the shell that the destination
            directory is the current working directory. 
          </para>
        </warning>

        <para>
          This upgrade method will give you a clean install of Bugzilla with the 
          same version as the tarball. That's fine if you don't have any local
          customizations that you want to maintain, but if you do then you will 
          need to reapply them by hand to the appropriate files. 
        </para>

        <para>
          It's worth noting that since 2.12, the Bugzilla tarballs come
          CVS-ready, so if you decide at a later date that you'd rather use
          CVS as an upgrade method, your code will already be set up for it.
        </para>
      </section>

      <section id="upgrade-patches">
        <title>Upgrading using patches</title>

        <para>
          If you are doing a bugfix upgrade -- that is, one where only the 
          last number of the revision changes, such as from 2.16.6 to 2.16.7
          -- then you have the option of obtaining and applying a patch file
          from the <ulink
          url="http://www.bugzilla.org/download/">Download Page</ulink>.
          This file is made available by the <ulink
          url="http://www.bugzilla.org/developers/profiles.html">Bugzilla
          Development Team</ulink>, and is a collection of all the bug fixes
          and security patches that have been made since the last bugfix
          release. If you are planning to upgrade via patches, it is safer
          to grab this developer-made patch file than to read the patch
          notes and apply all (or even just some of) the patches oneself,
          as sometimes patches on bugs get changed before they get checked in.
        </para>

        <para>
          As above, this example starts with obtaining the file via the 
          command line. If you have already downloaded it, you can omit the
          first two commands.
        </para>

        <programlisting>
bash$ <command>cd /var/www/html/bugzilla</command>
bash$ <command>wget ftp://ftp.mozilla.org/pub/mozilla.org/webtools/bugzilla-2.18.0-to-2.18.1.diff.gz</command>
<emphasis>(Output omitted)</emphasis>
bash$ <command>gunzip bugzilla-2.18.0-to-2.18.1.diff.gz</command>
bash$ <command>patch -p1 &lt; bugzilla-2.18.0-to-2.18.1.diff</command>
patching file checksetup.pl
patching file collectstats.pl
patching file globals.pl
<emphasis>(etc.)</emphasis>
        </programlisting>

        <warning>
          <para>
            Be aware that upgrading from a patch file does not change the
            entries in your <filename class="directory">CVS</filename> directory.
            This could make it more difficult to upgrade using CVS
            (<xref linkend="upgrade-cvs"/>) in the future.
          </para>
        </warning>

      </section>
    </section>

    <section id="upgrading-completion">
    <title>Completing Your Upgrade</title>

      <para>
        Regardless of which upgrade method you choose, you will need to
        run <command>./checksetup.pl</command> before your Bugzilla
        upgrade will be complete.
      </para>

      <programlisting>
bash$ <command>cd bugzilla</command>
bash$ <command>./checksetup.pl</command>
      </programlisting>

      <warning>
        <para>
          The period at the beginning of the command
          <command>./checksetup.pl</command> is important and can not
          be omitted.
        </para>
      </warning>
          
      <para>
        If you have done a lot of local modifications, it wouldn't hurt
        to run the Bugzilla Testing suite. This is not a required step,
        but it isn't going to hurt anything, and might help point out
        some areas that could be improved. (More information on the
        test suite can be had by following this link to the appropriate
        section in the <ulink
        url="http://www.bugzilla.org/docs/developer.html#testsuite">Developers'
        Guide</ulink>.)
      </para>

    </section>
  </section>
</chapter>

<!-- Keep this comment at the end of the file
Local variables:
mode: sgml
sgml-always-quote-attributes:t
sgml-auto-insert-required-elements:t
sgml-balanced-tag-edit:t
sgml-exposed-tags:nil
sgml-general-insert-case:lower
sgml-indent-data:t
sgml-indent-step:2
sgml-local-catalogs:nil
sgml-local-ecat-files:nil
sgml-minimize-attributes:nil
sgml-namecase-general:t
sgml-omittag:t
sgml-parent-document:("Bugzilla-Guide.xml" "book" "chapter")
sgml-shorttag:t
sgml-tag-region-if-active:t
End:
-->