diff options
Diffstat (limited to 'src/livecd/profiles')
454 files changed, 0 insertions, 86282 deletions
diff --git a/src/livecd/profiles/README b/src/livecd/profiles/README deleted file mode 100644 index 02e16cd013..0000000000 --- a/src/livecd/profiles/README +++ /dev/null @@ -1 +0,0 @@ -x86 only working profile with current livecd-ng diff --git a/src/livecd/profiles/aa/XF86Config.ati b/src/livecd/profiles/aa/XF86Config.ati deleted file mode 100644 index 4f62e673e0..0000000000 --- a/src/livecd/profiles/aa/XF86Config.ati +++ /dev/null @@ -1,153 +0,0 @@ -Section "dri" - Mode 0666 -EndSection - -# ********************************************************************** -# Module section -- this section is used to specify -# which dynamically loadable modules to load. -# ********************************************************************** -# -Section "Module" - -# This loads the DBE extension module. - - Load "dbe" # Double buffer extension - -# This loads the miscellaneous extensions module, and disables -# initialisation of the XFree86-DGA extension within that module. - SubSection "extmod" - Option "omit xfree86-dga" # don't initialise the DGA extension - EndSubSection - -# This loads the Type1 and FreeType font modules - Load "type1" - Load "freetype" - -# This loads the GLX module - Load "glx" # libglx.a - Load "dri" # libdri.a - -EndSection - -# ********************************************************************** -# Files section. This allows default font and rgb paths to be set -# ********************************************************************** - -Section "Files" - -# The location of the RGB database. Note, this is the name of the -# file minus the extension (like ".txt" or ".db"). There is normally -# no need to change the default. - - RgbPath "/usr/X11R6/lib/X11/rgb" - -# Multiple FontPath entries are allowed (which are concatenated together), -# as well as specifying multiple comma-separated entries in one FontPath -# command (or a combination of both methods) -# -# If you don't have a floating point coprocessor and emacs, Mosaic or other -# programs take long to start up, try moving the Type1 and Speedo directory -# to the end of this list (or comment them out). -# - - - FontPath "/usr/X11R6/lib/X11/fonts/local/" - FontPath "/usr/X11R6/lib/X11/fonts/misc/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" - FontPath "/usr/X11R6/lib/X11/fonts/Type1/" - FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" - -# The module search path. The default path is shown here. - -# ModulePath "/usr/X11R6/lib/modules" - -EndSection - - -Section "InputDevice" - - Identifier "Keyboard1" - Driver "Keyboard" - Option "AutoRepeat" "500 30" - Option "XkbRules" "xfree86" - Option "XkbModel" "pc101" - Option "XkbLayout" "us" - -EndSection - -Section "InputDevice" - - Identifier "Mouse1" - Driver "mouse" - Option "Protocol" "##MOUSEPROTO##" - Option "ZAxisMapping" "4 5" - Option "Device" "##MOUSEDEV##" - -EndSection - -Section "Monitor" - Identifier "Monitor0" - HorizSync ##HORIZSYNC## - VertRefresh ##VERTREFRESH## -EndSection - -Section "Device" - Identifier "ATI Graphics Adapter" - Driver "fglrx" - Option "no_accel" "no" - Option "no_dri" "no" - Option "DesktopSetup" "0x00000000" - Option "MonitorLayout" "AUTO, AUTO" - Option "IgnoreEDID" "off" - Option "HSync2" "unspecified" - Option "VRefresh2" "unspecified" - Option "ScreenOverlap" "0" - Option "GammaCorrectionI" "0x00000000" - Option "GammaCorrectionII" "0x00000000" -# === OpenGL specific profiles/settings === - Option "Capabilities" "0x00000800" -# === Video Overlay for the Xv extension === - Option "VideoOverlay" "on" -# === OpenGL Overlay === -# Note: When OpenGL Overlay is enabled, Video Overlay -# will be disabled automatically - Option "OpenGLOverlay" "off" -# === Misc Options === - Option "UseFastTLS" "0" - Option "BlockSignalsOnLock" "on" - Option "UseInternalAGPGART" "yes" - Option "ForceGenericCPU" "no" - Screen 0 -EndSection - -# ********************************************************************** -# Screen sections -# ********************************************************************** - -# Any number of screen sections may be present. Each describes -# the configuration of a single screen. A single specific screen section -# may be specified from the X server command line with the "-screen" -# option. -Section "Screen" - Identifier "Screen0" - Device "ATI Graphics Adapter" - Monitor "Monitor0" - DefaultDepth 24 - #Option "backingstore" - - Subsection "Display" - Depth 24 - Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" "512x384" - ViewPort 0 0 - EndSubsection -EndSection - -Section "ServerLayout" - Identifier "Server Layout" - Screen "Screen0" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection diff --git a/src/livecd/profiles/aa/XF86Config.nvidia b/src/livecd/profiles/aa/XF86Config.nvidia deleted file mode 100644 index 44ca0c4752..0000000000 --- a/src/livecd/profiles/aa/XF86Config.nvidia +++ /dev/null @@ -1,105 +0,0 @@ -Section "ServerLayout" - Identifier "XFree86 Configured" - Screen 0 "Screen0" 0 0 - InputDevice "Mouse0" "CorePointer" - InputDevice "Keyboard0" "CoreKeyboard" -EndSection - -Section "Files" - RgbPath "/usr/X11R6/lib/X11/rgb" - ModulePath "/usr/X11R6/lib/modules" - - FontPath "/usr/X11R6/lib/X11/fonts/misc/" - FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" - FontPath "/usr/X11R6/lib/X11/fonts/Type1/" - FontPath "/usr/X11R6/lib/X11/fonts/CID/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" -EndSection - -Section "Module" - Load "dbe" -# Load "dri" - Load "extmod" - Load "glx" - Load "record" - Load "xtrap" - Load "speedo" - Load "type1" -EndSection - -Section "InputDevice" - Identifier "Keyboard0" - Driver "keyboard" -EndSection - -Section "InputDevice" - Identifier "Mouse0" - Driver "mouse" - Option "Protocol" "##MOUSEPROTO##" - Option "Device" "##MOUSEDEV##" - Option "ZAxisMapping" "4 5" -EndSection - -Section "Monitor" - Identifier "Monitor0" - VendorName "Monitor Vendor" - ModelName "Monitor Model" - HorizSync ##HORIZSYNC## - VertRefresh ##VERTREFRESH## -EndSection - -Section "Device" - ### Available Driver options are:- - ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", - ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" - ### [arg]: arg optional - #Option "DigitalVibrance" # <i> - #Option "PageFlip" # [<bool>] - #Option "Dac8Bit" # [<bool>] - #Option "NoLogo" # [<bool>] - #Option "Overlay" # [<bool>] - #Option "UBB" # [<bool>] - #Option "Stereo" # [<bool>] - #Option "BlueLine" # [<bool>] - #Option "WindowFlip" # [<bool>] - #Option "SWcursor" # [<bool>] - #Option "HWcursor" # [<bool>] - #Option "VideoKey" # <i> - #Option "NvAGP" # <i> - #Option "PixmapCacheLines" # <i> - #Option "IgnoreEDID" # [<bool>] - #Option "NoDDC" # [<bool>] - #Option "ConnectedMonitors" # <str> - #Option "TVStandard" # <str> - #Option "TVOutFormat" # <str> - #Option "NoRenderAccel" # [<bool>] - Option "CursorShadow" "1" # [<bool>] - #Option "CursorShadowAlpha" # <i> - #Option "CursorShadowXOffset" # <i> - #Option "CursorShadowYOffset" # <i> - #Option "UseEdidFreqs" # [<bool>] - #Option "FlatPanelProperties" # <str> - #Option "SecondMonitorHorizSync" # <str> - #Option "SecondMonitorVertRefresh" # <str> - #Option "UseInt10Module" # [<bool>] - #Option "SwapReady" # [<bool>] - #Option "NoTwinViewXineramaInfo" # [<bool>] - #Option "NoRenderExtension" # [<bool>] - Identifier "Card0" - Driver "nvidia" - VendorName "NVidia" -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Card0" - Monitor "Monitor0" - DefaultColorDepth 24 - SubSection "Display" - Modes "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" "512x384" - Depth 24 - ViewPort 0 0 - EndSubSection -EndSection - diff --git a/src/livecd/profiles/aa/XF86Config.xfree b/src/livecd/profiles/aa/XF86Config.xfree deleted file mode 100644 index 24109eb6b9..0000000000 --- a/src/livecd/profiles/aa/XF86Config.xfree +++ /dev/null @@ -1,125 +0,0 @@ -Section "dri" - Mode 0666 -EndSection - -# ********************************************************************** -# Module section -- this section is used to specify -# which dynamically loadable modules to load. -# ********************************************************************** -# -Section "Module" - -# This loads the DBE extension module. - - Load "dbe" # Double buffer extension - -# This loads the miscellaneous extensions module, and disables -# initialisation of the XFree86-DGA extension within that module. - SubSection "extmod" - Option "omit xfree86-dga" # don't initialise the DGA extension - EndSubSection - -# This loads the Type1 and FreeType font modules - Load "type1" - Load "freetype" - -EndSection - -# ********************************************************************** -# Files section. This allows default font and rgb paths to be set -# ********************************************************************** - -Section "Files" - -# The location of the RGB database. Note, this is the name of the -# file minus the extension (like ".txt" or ".db"). There is normally -# no need to change the default. - - RgbPath "/usr/X11R6/lib/X11/rgb" - -# Multiple FontPath entries are allowed (which are concatenated together), -# as well as specifying multiple comma-separated entries in one FontPath -# command (or a combination of both methods) -# -# If you don't have a floating point coprocessor and emacs, Mosaic or other -# programs take long to start up, try moving the Type1 and Speedo directory -# to the end of this list (or comment them out). -# - - - FontPath "/usr/X11R6/lib/X11/fonts/local/" - FontPath "/usr/X11R6/lib/X11/fonts/misc/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" - FontPath "/usr/X11R6/lib/X11/fonts/Type1/" - FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" - -# The module search path. The default path is shown here. - - ModulePath "/usr/X11R6/lib/modules" - -EndSection - - -Section "InputDevice" - - Identifier "Keyboard1" - Driver "Keyboard" - Option "AutoRepeat" "500 30" - Option "XkbRules" "xfree86" - Option "XkbModel" "pc101" - Option "XkbLayout" "us" - -EndSection - -Section "InputDevice" - - Identifier "Mouse1" - Driver "mouse" - Option "Protocol" "##MOUSEPROTO##" - Option "ZAxisMapping" "4 5" - Option "Device" "##MOUSEDEV##" - -EndSection - -Section "Monitor" - Identifier "Monitor0" - HorizSync ##HORIZSYNC## - VertRefresh ##VERTREFRESH## -EndSection - -Section "Device" - Identifier "Vesa Graphics Adapter" - Driver "vesa" - Screen 0 -EndSection - -# ********************************************************************** -# Screen sections -# ********************************************************************** - -# Any number of screen sections may be present. Each describes -# the configuration of a single screen. A single specific screen section -# may be specified from the X server command line with the "-screen" -# option. -Section "Screen" - Identifier "Screen0" - Device "Vesa Graphics Adapter" - Monitor "Monitor0" - DefaultDepth 24 - - Subsection "Display" - Depth 24 - Modes "1024x768" - ViewPort 0 0 - EndSubsection -EndSection - -Section "ServerLayout" - Identifier "Server Layout" - Screen "Screen0" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection diff --git a/src/livecd/profiles/aa/aa1024.png b/src/livecd/profiles/aa/aa1024.png Binary files differdeleted file mode 100644 index 35b3b367ab..0000000000 --- a/src/livecd/profiles/aa/aa1024.png +++ /dev/null diff --git a/src/livecd/profiles/aa/aux-files/1024.initrd b/src/livecd/profiles/aa/aux-files/1024.initrd Binary files differdeleted file mode 100644 index 13b7edabcc..0000000000 --- a/src/livecd/profiles/aa/aux-files/1024.initrd +++ /dev/null diff --git a/src/livecd/profiles/aa/aux-files/aumix b/src/livecd/profiles/aa/aux-files/aumix deleted file mode 100644 index f8fe183b70..0000000000 --- a/src/livecd/profiles/aa/aux-files/aumix +++ /dev/null @@ -1,44 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2003 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/aa/aux-files/Attic/aumix,v 1.1 2003/10/19 03:10:49 livewire Exp $ - -depend() { - need modules - use alsa -} - -checkconfig() { - if [ -z "`grep 'sound' /proc/devices`" ] && [ ! -d /proc/asound ] - then - eerror "Sound support has not been compiled into the kernel," - eerror "or is disabled. Please check that the correct modules" - eerror "is loaded." - return 1 - fi - # /dev/mixer can be a symlink - if [ ! -e /dev/mixer ] ; then - eerror "/dev/mixer do not exist, please create it, or load the" - eerror "correct modules to enable your card's mixer" - return 1 - fi -} - -start() { - checkconfig || return 1 - if [ -f /etc/aumixrc ] ; then - ebegin "Loading Mixer settings" - /usr/bin/aumix -f /etc/aumixrc -L >/dev/null 2>&1 - else - ebegin "Setting Mixer settings" - /usr/bin/aumix -v100 -c100 -w100 >/dev/null 2>&1 - fi - eend $? -} - -stop() { - checkconfig || return 1 - ebegin "Saving Mixer settings" - /usr/bin/aumix -f /etc/aumixrc -S >/dev/null 2>&1 - eend $? -} diff --git a/src/livecd/profiles/aa/aux-files/autoconfig b/src/livecd/profiles/aa/aux-files/autoconfig deleted file mode 100644 index f189a34bbd..0000000000 --- a/src/livecd/profiles/aa/aux-files/autoconfig +++ /dev/null @@ -1,173 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/aa/aux-files/Attic/autoconfig,v 1.1 2003/10/19 03:10:49 livewire Exp $ -echo "0" > /proc/sys/kernel/printk -DHCP="yes" -DETECT="yes" -PCMCIA="no" -HOTPLUG="yes" -APM="no" -ACPI="no" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "nodetect" ] - then - DETECT="no" - HOTPLUG="no" - APM="no" - ACPI="no" - fi -done -for x in $CMDLINE -do - if [ "$x" = "nodhcp" ] - then - DHCP="no" - fi -done -for x in $CMDLINE -do - if [ "$x" = "dopcmcia" ] - then - PCMCIA="yes" - fi -done -for x in $CMDLINE -do - if [ "$x" = "nohotplug" ] - then - HOTPLUG="no" - fi -done -for x in $CMDLINE -do - if [ "$x" = "noapm" ] - then - APM="no" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "acpi=on" ] - then - APM="no" - ACPI="yes" - fi -done - - -depend() { - after * - after urandom -} - -start() { -if [ "$DETECT" = "yes" ] - then - ebegin $WARN"Hardware detection started" - PC=`awk -F: '/^processor/{printf "Processor"$2" is"};/^model name/{printf $2};/^vendor_id/{printf vendor};/^cpu MHz/{printf " %dMHz",int($2)};/^cache size/{printf ","$2" Cache"};/^$/{print ""}' /proc/cpuinfo 2>/dev/null` - ebegin $GOOD"$PC" - eend - hwsetup -p >/dev/null - eend - else - ebegin $WARN"Hardware detection disabled via cmdline$NORMAL" -fi - -if [ "$APM" = "no" ] - then - ebegin $GOOD"Not Loading APM Bios support.${NORMAL}" - else - insmod apm power_off=1 >/dev/null 2>&1 && ebegin $GOOD"APM BIOS found, power management functions enabled.$NORMAL" - /etc/init.d/apmd start - eend -fi - - -if [ "$ACPI" = "yes" ] - then - insmod processor >/dev/null 2>&1 && ebegin $GOOD ACPI power management functions enabled.$NORMAL - insmod fan >/dev/null - insmod thermal >/dev/null - insmod button >/dev/null - insmod battery >/dev/null - insmod ac >/dev/null - /etc/init.d/acpid start - eend -fi - -if [ "$PCMCIA" = "yes" ] - then - ebegin $HILITE "PCMCIA enabled via cmdline" - /etc/init.d/pcmcia start -fi - -if [ "$DHCP" = "no" ] - then - sed 's/iface_eth0="dhcp"/#iface_eth0="dhcp"/' /etc/conf.d/net > /etc/conf.d/net1 - cp /etc/conf.d/net1 /etc/conf.d/net - rm /etc/conf.d/net1 - ebegin $BAD"Skipping DHCP broadcast detection as requested on boot commandline." -fi - - #Read in what hwsetup has found -[ -f /etc/sysconfig/knoppix ] && . /etc/sysconfig/knoppix - -# Mouse -if [ -n "$MOUSE_DEVICE" ] - then - ebegin $GOOD"Mouse is $HILITE$MOUSE_FULLNAME$GOOD at $HILITE$MOUSE_DEVICE$NORMAL" - eend -fi - -if [ "$HOTPLUG" = "yes" ] - then - /etc/init.d/hotplug start - else - ebegin $BAD"Hotplug disabled via cmdline$NORMAL" -fi - -if [ "$DETECT" = "no" ] - then - DHCP="no" - -fi - -if [ "$DETECT" = "yes" ] - then - NETDEVICES="`awk -F: '/eth.:|tr.:/{print $1}' /proc/net/dev 2>/dev/null`" -fi - -if [ -n "$NETDEVICES" ] - then - ebegin $GOOD"Network device$HILITE$NETDEVICES$GOOD detected,$WARN DHCP broadcasting for IP.$NORMAL" - eend - else - ebegin $BAD"No Network device auto detected.$NORMAL" - -fi - - -if [ -n "$SOUND_FULLNAME" -o -n "$SOUND_DRIVER" ] - then - # Setting micro input to zero to avoid subsonic disaster - ebegin $GOOD"Soundcard:" - eend - aumix -m 0 >/dev/null 2>&1 - aumix -f /etc/aumixrc -L >/dev/null 2>&1 - aumix -v100 -c100 -w100 >/dev/null 2>&1 - [ -n "$SOUND_FULLNAME" ] - ebegin " $WARN$SOUND_FULLNAME" - [ -n "$SOUND_DRIVER" ] - ebegin $WARN" driver = $SOUND_DRIVER"$HILITE -fi - -killall hwsetup 2>/dev/null -test -f /proc/splash && echo "show 65535" > /proc/splash -echo "6" > /proc/sys/kernel/printk -echo off >/proc/splash -clear -} diff --git a/src/livecd/profiles/aa/aux-files/bg.png b/src/livecd/profiles/aa/aux-files/bg.png Binary files differdeleted file mode 100644 index b695afc50b..0000000000 --- a/src/livecd/profiles/aa/aux-files/bg.png +++ /dev/null diff --git a/src/livecd/profiles/aa/aux-files/bootsplash-1024x768.cfg b/src/livecd/profiles/aa/aux-files/bootsplash-1024x768.cfg deleted file mode 100644 index ca47f2ad2e..0000000000 --- a/src/livecd/profiles/aa/aux-files/bootsplash-1024x768.cfg +++ /dev/null @@ -1,56 +0,0 @@ -# This is a bootsplash configuration file for -# theme SuSE, resolution 1024x768. See -# ftp://ftp.suse.com/pub/people/stepan/bootsplash for -# more information. Comments are welcome by stepan@suse.de - -# config file version -version=3 - -# should the picture be displayed? -state=1 - -# fgcolor is the text forground color. -# bgcolor is the text background (i.e. transparent) color. -fgcolor=7 -bgcolor=0 - -# (tx, ty) are the (x, y) coordinates of the text window in pixels. -# tw/th is the width/height of the text window in pixels. -tx=25 -ty=28 -tw=979 -th=649 - -# ttf message output parameters -text_x=312 -text_y=532 -text_size=18 -#text_color=0xeef4ff -text_color=-0x000000 -# name of the picture file (full path recommended) -jpeg=/etc/bootsplash/gentoo/images/bootsplash-1024x768.jpg -silentjpeg=/etc/bootsplash/gentoo/images/silent-1024x768.jpg - -progress_enable=1 - -# background -box silent noover 204 582 820 612 #04045498 -box silent inter 204 583 204 611 #ffffff #ffffff #526bb0 #526bb0 -box silent 204 583 820 611 #ffffff #ffffff #526bb0 #526bb0 -# black border -box silent 204 582 820 582 #313234 -box silent 204 612 820 612 #eef4ff -box silent 204 582 204 612 #313234 -box silent 820 582 820 612 #eef4ff - -# text box (left, top) -box 19 19 19 679 #313234 -box 19 19 1005 19 #313234 -# (right, bottom) -box 1005 19 1005 679 #eef4ff -box 19 679 1005 679 #eef4ff - -# box itself -box noover 20 20 1004 678 #04045498 - -overpaintok=1 diff --git a/src/livecd/profiles/aa/aux-files/checkfs b/src/livecd/profiles/aa/aux-files/checkfs deleted file mode 100644 index 3de343b96f..0000000000 --- a/src/livecd/profiles/aa/aux-files/checkfs +++ /dev/null @@ -1,78 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/aa/aux-files/Attic/checkfs,v 1.1 2003/10/19 03:10:49 livewire Exp $ - - -depend() { - need checkroot modules -} - -start() { - # LVM support for /usr, /home, /opt .... - # This should be done *before* checking local - # volumes, or they never get checked. - - # NOTE: Add needed modules for LVM or RAID, etc - # to /etc/modules.autoload if needed - - if [ -x /sbin/vgscan -a -d /proc/lvm ] - then - ebegin "Setting up the Logical Volume Manager" - #still echo stderr for debugging - /sbin/vgscan >/dev/null - if [ "$?" -eq 0 ] && [ -x /sbin/vgchange -a -f /etc/lvmtab ] - then - /sbin/vgchange -a y >/dev/null - fi - eend $? "Failed to setup the LVM" - fi - - # Start software raid - if [ -x /sbin/raidstart -a -f /etc/raidtab -a -f /proc/mdstat ] - then - ebegin "Starting software RAID" - ACTIVE_RAID="`grep -E "md[0-9]+[[:space:]]?: active raid" /proc/mdstat | awk -F ':' '{print $1}'`" - if [ ! -z "${ACTIVE_RAID}" ] - then - for x in $(grep -E "raiddev /dev/md[0-9]+" /etc/raidtab | \ - awk '{print $2}' | grep -v "`echo ${ACTIVE_RAID} | sed s'/[[:space:]]//g'`") - do - /sbin/raidstart /dev/${x} - done - else - /sbin/raidstart --all - fi - eend $? "Failed to start software RAID" - fi - - if [ -f /fastboot ] - then - rm -f /fastboot - else - ebegin "Checking all filesystems" - if [ -f /forcefsck ] - then - ewarn "A full fsck has been forced" - fsck -C -R -A -a -f - rm -f /forcefsck - else - fsck -R -A -a >/dev/null 2>&1 - fi - if [ "$?" -eq 0 ] - then - eend 0 - elif [ "$?" -eq 1 ] - then - ewend 1 "Filesystem errors corrected." - #everything should be ok, so return a pass - return 0 - else - eend 2 "Fsck could not correct all errors, manual repair needed" - /sbin/sulogin ${CONSOLE} - fi - fi -} - - -# vim:ts=4 diff --git a/src/livecd/profiles/aa/aux-files/checkroot b/src/livecd/profiles/aa/aux-files/checkroot deleted file mode 100644 index 9e0a06aad0..0000000000 --- a/src/livecd/profiles/aa/aux-files/checkroot +++ /dev/null @@ -1,87 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/aa/aux-files/Attic/checkroot,v 1.1 2003/10/19 03:10:49 livewire Exp $ - - -depend() { - before * -} - -start() { - if [ ! -f /fastboot ] - then - ebegin "Remounting root filesystem read-only (if necessary)" - mount / -n -o remount,ro &>/dev/null - eend $? - - ebegin "Checking root filesystem" - if [ -f /forcefsck ] - then - ewarn "A full fsck has been forced" - ewarn "Skipping fsck; this is a livecd" -# fsck -C -f -a / - # /forcefsck isn't deleted because checkfs needs it. - # it'll be deleted in that script. - fi - if [ "$?" -eq 0 ] - then - eend 0 - elif [ "$?" -eq 1 ] - then - ewend 1 "Filesystem repaired" - else - eend 2 "Filesystem couldn't be fixed :(" - /sbin/sulogin ${CONSOLE} - /sbin/reboot -f - fi - fi - - ebegin "Remounting root filesystem read/write" - mount / -n -o remount,rw &>/dev/null - if [ "$?" -ne 0 ] - then - eend 2 "Root filesystem could not be mounted R/W :(" - /sbin/sulogin ${CONSOLE} - else - eend 0 - fi - - if [ "${BOOT}" = "yes" ] - then - # create /etc/mtab (done by forcing current mounted filesystems) - # NB: this needs to be updated if our /sbin/rc mounts change ... - > /etc/mtab - mount -f -o rw / &> /dev/null - mount -f /proc &> /dev/null - - # Remove stale backups - rm -f /etc/mtab~ /etc/mtab~~ - - # should /dev be mounted ? - if ! get_bootparam "nodevfs" && [ -e /dev/.devfsd ] - then - mount -f -t devfs none /dev &> /dev/null - fi - - # should we mount a ramdisk or tmpfs? - if ! get_bootparam "notmpfs" - then - # using tmpfs - mount -f -t tmpfs tmpfs ${svcdir} \ - -o rw,mode=0644,size=${svcsize}k &> /dev/null - else - # using a ramdisk - mount -f -t ext2 /dev/ram0 ${svcdir} -o rw &> /dev/null - fi - - if ! get_bootparam "notmpfs" && get_bootparam "ngpt" - then - # POSIX shared memory support - mount -f /dev/shm &> /dev/null - fi - fi -} - - -# vim:ts=4 diff --git a/src/livecd/profiles/aa/aux-files/depscan.sh b/src/livecd/profiles/aa/aux-files/depscan.sh deleted file mode 100644 index 7fe997e1b4..0000000000 --- a/src/livecd/profiles/aa/aux-files/depscan.sh +++ /dev/null @@ -1,41 +0,0 @@ -#!/bin/bash -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# Author: Martin Schlemmer <azarah@gentoo.org> -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/aa/aux-files/Attic/depscan.sh,v 1.1 2003/10/19 03:10:49 livewire Exp $ - -source /etc/init.d/functions.sh - -ebegin "Caching service dependencies" - - -lookbusy() { - local type - type=${1}; shift - for i in "$@" - do echo -n $GOOD" * Loading Services" $i;echo -n -e "\r"; - usleep 600000 ; -done -echo $WARN" * Loading Services 100%" -echo -n $NORMAL -} - -lookbusy '10%' '20%' '30%' '40%' '50%' '60%' '70%' '80%' '90%' '100%' - -/bin/gawk -v SVCDIR="${svcdir}" \ - -f /lib/rcscripts/awk/functions.awk \ - -f /lib/rcscripts/awk/cachedepends.awk - -cd /etc/init.d - -bash ${svcdir}/depcache | \ - /bin/gawk -v SVCDIR="${svcdir}" \ - -v DEPTYPES="${deptypes}" \ - -v ORDTYPES="${ordtypes}" \ - -f /lib/rcscripts/awk/functions.awk \ - -f /lib/rcscripts/awk/gendepends.awk - -eend $? "Failed to cache service dependencies" - - -# vim:ts=4 diff --git a/src/livecd/profiles/aa/aux-files/fbresolution b/src/livecd/profiles/aa/aux-files/fbresolution Binary files differdeleted file mode 100644 index cc077dab18..0000000000 --- a/src/livecd/profiles/aa/aux-files/fbresolution +++ /dev/null diff --git a/src/livecd/profiles/aa/aux-files/fbtruetype.static b/src/livecd/profiles/aa/aux-files/fbtruetype.static Binary files differdeleted file mode 100644 index c2b9654f9e..0000000000 --- a/src/livecd/profiles/aa/aux-files/fbtruetype.static +++ /dev/null diff --git a/src/livecd/profiles/aa/aux-files/fluxbox.tar.bz2 b/src/livecd/profiles/aa/aux-files/fluxbox.tar.bz2 Binary files differdeleted file mode 100644 index 1acbf85a2d..0000000000 --- a/src/livecd/profiles/aa/aux-files/fluxbox.tar.bz2 +++ /dev/null diff --git a/src/livecd/profiles/aa/aux-files/freeramdisk.c b/src/livecd/profiles/aa/aux-files/freeramdisk.c deleted file mode 100644 index da82fba115..0000000000 --- a/src/livecd/profiles/aa/aux-files/freeramdisk.c +++ /dev/null @@ -1,32 +0,0 @@ -#include <stdio.h> -#include <string.h> -#include <sys/mount.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <fcntl.h> -#include <sys/ioctl.h> -#include <errno.h> - -main(int argc, char **argv) -{ - char rname[256]="/dev/ram"; - char b[256]; - int f; - if (argv[1]) strcpy(rname,argv[1]); - -#if 0 /* don't use on a living system, /etc/mtab is not updated */ - if (umount(rname) && (errno != ENOENT)) { - sprintf(b,"freeramdisk: cannot umount %s %d",rname,errno); - perror(b); - exit(1); - } -#endif - - if ((f=open(rname,O_RDWR)) == -1) { - sprintf(b,"freeramdisk: cannot open %s",rname); - perror(b); - exit(1); - } - ioctl(f,BLKFLSBUF); - close(f); -} diff --git a/src/livecd/profiles/aa/aux-files/fstab b/src/livecd/profiles/aa/aux-files/fstab deleted file mode 100644 index da349ef1f0..0000000000 --- a/src/livecd/profiles/aa/aux-files/fstab +++ /dev/null @@ -1,8 +0,0 @@ -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/aa/aux-files/Attic/fstab,v 1.1 2003/10/19 03:10:50 livewire Exp $ - -# /etc/fstab: static file system information. -proc /proc proc defaults 0 0 -tmpfs /dev/shm tmpfs defaults 0 0 -tmpfs /lib/dev-state tmpfs defaults 0 0 diff --git a/src/livecd/profiles/aa/aux-files/functions.sh b/src/livecd/profiles/aa/aux-files/functions.sh deleted file mode 100644 index 2ab1441f7f..0000000000 --- a/src/livecd/profiles/aa/aux-files/functions.sh +++ /dev/null @@ -1,568 +0,0 @@ -# Copyright 1999-2003 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/aa/aux-files/Attic/functions.sh,v 1.1 2003/10/19 03:10:50 livewire Exp $ - -umask 022 - -if [ -z "${EBUILD}" ] -then - # Setup a basic $PATH. Just add system default to existing. - # This should solve both /sbin and /usr/sbin not present when - # doing 'su -c foo', or for something like: PATH= rcscript start - PATH="/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/sbin:${PATH}" -fi - -# daemontools dir -SVCDIR="/var/lib/supervise" - -# Check /etc/conf.d/rc for a description of these ... -svcdir="/var/lib/init.d" -svcmount="no" -svcfstype="tmpfs" -svcsize=1024 -shmdir="/mnt/.shm" - -# Different types of dependencies -deptypes="need use" -# Different types of order deps -ordtypes="before after" - -# -# Internal variables -# - -# Dont output to stdout? -RC_QUIET_STDOUT="no" - -# Should we use color? -RC_NOCOLOR="no" - -# -# Default values for rc system -# -RC_NET_STRICT_CHECKING="no" - -# Override defaults with user settings ... -[ -f /etc/conf.d/rc ] && source /etc/conf.d/rc - - -getcols() { - echo "$2" -} - -# Should we use colors ? -if [ -n "${EBUILD}" ] && [ "${*/depend}" = "$*" ] -then - # Check user pref in portage - RC_NOCOLOR="`python -c 'import portage; print portage.settings["NOCOLOR"]' 2> /dev/null`" - -elif [ -n "${EBUILD}" ] && [ "${*/depend}" != "$*" ] -then - # We do not want colors or stty to run during emerge depend - RC_NOCOLOR="yes" - -elif [ "`/bin/consoletype 2> /dev/null`" = "serial" ] -then - # We do not want colors on serial terminals - RC_NOCOLOR="yes" -else - # Lastly check if the user disabled it with --nocolor argument - for arg in $* - do - case "${arg}" in - --nocolor) - RC_NOCOLOR="yes" - ;; - esac - done -fi - -if [ "${RC_NOCOLOR}" = "yes" ] -then - COLS="25 80" - ENDCOL= - - if [ -n "${EBUILD}" ] && [ "${*/depend}" = "$*" ] - then - stty cols 80 &>/dev/null - stty rows 25 &>/dev/null - fi -else - COLS="`stty size 2> /dev/null`" - COLS="`getcols ${COLS}`" - COLS=$((${COLS} - 7)) - ENDCOL=$'\e[A\e['${COLS}'G' # Now, ${ENDCOL} will move us to the end of the - # column; irregardless of character width -fi - -if [ "${RC_NOCOLOR}" = "yes" ] -then - GOOD="" - WARN="" - BAD="" - NORMAL="" - - HILITE="" - BRACKET="" -else - GOOD=$'\e[32;01m' - WARN=$'\e[33;01m' - BAD=$'\e[31;01m' - NORMAL=$'\e[0m' - - HILITE=$'\e[36;01m' - BRACKET=$'\e[34;01m' -fi - -# void esyslog(char* priority, char* tag, char* message) -# -# use the system logger to log a message -# -esyslog() { - if [ -x /usr/bin/logger ] - then - pri="$1" - tag="$2" - - shift 2 - [ -z "$*" ] && return 0 - - /usr/bin/logger -p "${pri}" -t "${tag}" -- "$*" - fi -} - -# void einfo(char* message) -# -# show an informative message (with a newline) -# -einfo() { - if [ "${RC_QUIET_STDOUT}" = "yes" ] - then - return - else - echo -e " ${GOOD}*${NORMAL} ${*}" - fi -} - -# void einfon(char* message) -# -# show an informative message (without a newline) -# -einfon() { - if [ "${RC_QUIET_STDOUT}" = "yes" ] - then - return - else - echo -ne " ${GOOD}*${NORMAL} ${*}" - fi -} - -# void ewarn(char* message) -# -# show a warning message + log it -# -ewarn() { - if [ "${RC_QUIET_STDOUT}" = "yes" ] - then - echo " ${*}" - else - echo -e " ${WARN}*${NORMAL} ${*}" - fi - - # Log warnings to system log - esyslog "daemon.warning" "rc-scripts" "${*}" -} - -# void eerror(char* message) -# -# show an error message + log it -# -eerror() { - if [ "${RC_QUIET_STDOUT}" = "yes" ] - then - echo " ${*}" >/dev/stderr - else - echo -e " ${BAD}*${NORMAL} ${*}" - fi - - # Log errors to system log - esyslog "daemon.err" "rc-scripts" "${*}" -} - -# void ebegin(char* message) -# -# show a message indicating the start of a process -# -ebegin() { - if [ "${RC_QUIET_STDOUT}" = "yes" ] - then - return - else - if [ "${RC_NOCOLOR}" = "yes" ] - then - echo -ne " ${GOOD}*${NORMAL} ${*}..." - else - echo -e " ${GOOD}*${NORMAL} ${*}..." - fi - fi -} - -# void eend(int error, char* errstr) -# -# indicate the completion of process -# if error, show errstr via eerror -# -eend() { - if [ "$#" -eq 0 ] || ([ -n "$1" ] && [ "$1" -eq 0 ]) - then - if [ "${RC_QUIET_STDOUT}" != "yes" ] - then - echo -e "${ENDCOL} ${BRACKET}[ ${GOOD}ok${BRACKET} ]${NORMAL}" - fi - else - local retval="$1" - if [ "$#" -ge 2 ] - then - shift - eerror "${*}" - fi - if [ "${RC_QUIET_STDOUT}" != "yes" ] - then - echo -e "${ENDCOL} ${BRACKET}[ ${BAD}!!${BRACKET} ]${NORMAL}" - # extra spacing makes it easier to read - echo - fi - return ${retval} - fi -} - -# void ewend(int error, char *warnstr) -# -# indicate the completion of process -# if error, show warnstr via ewarn -# -ewend() { - if [ "$#" -eq 0 ] || ([ -n "$1" ] && [ "$1" -eq 0 ]) - then - if [ "${RC_QUIET_STDOUT}" != "yes" ] - then - echo -e "${ENDCOL} ${BRACKET}[ ${GOOD}ok${BRACKET} ]${NORMAL}" - fi - else - local retval="$1" - if [ "$#" -ge 2 ] - then - shift - ewarn "${*}" - fi - if [ "${RC_QUIET_STDOUT}" != "yes" ] - then - echo -e "${ENDCOL} ${BRACKET}[ ${WARN}!!${BRACKET} ]${NORMAL}" - # extra spacing makes it easier to read - echo - fi - return "${retval}" - fi -} - -# bool wrap_rcscript(full_path_and_name_of_rc-script) -# -# check to see if a given rc-script has syntax errors -# zero == no errors -# nonzero == errors -# -wrap_rcscript() { - local retval=1 - - ( echo "function test_script() {" ; cat "$1"; echo "}" ) > "${svcdir}/foo.sh" - - if source "${svcdir}/foo.sh" &> /dev/null - then - test_script &> /dev/null - retval=0 - fi - rm -f "${svcdir}/foo.sh" - return "${retval}" -} - -# int checkserver(void) -# -# Return 0 (no error) if this script is executed -# onto the server, one otherwise. -# See the boot section of /sbin/rc for more details. -# -checkserver() { - # Only do check if 'gentoo=adelie' is given as kernel param - if get_bootparam "adelie" - then - [ "`cat ${svcdir}/hostname`" = "(none)" ] || return 1 - fi - - return 0 -} - -# void init_node(void) -# -# Initialize an Adelie node. -# -init_node() { - ebegin "Importing local userspace on node" - - try mount -t tmpfs none "${shmdir}" - - for DIR in /etc /var /root - do - - if grep -q -v "^${DIR}[[:space:]]" /etc/exports - then - mount -o nolock -n server:"${DIR}" "${DIR}" - fi - - if [ -e "/etc/conf.d/exclude/${DIR}" ] - then - find "${DIR}/" -type d | grep -v -f "/etc/conf.d/exclude/${DIR}" \ - > "${shmdir}/${DIR}.lst" - else - find "${DIR}/" -type d > "${shmdir}/${DIR}.lst" - fi - - for SUBDIR in `cat ${shmdir}/${DIR}.lst` - do - mkdir -p "${shmdir}/${SUBDIR}" - chmod --reference="${SUBDIR}" "${shmdir}/${SUBDIR}" - cp -dp "${SUBDIR}"/* "${shmdir}/${SUBDIR}" &> /dev/null - done - - if [ -e "/etc/conf.d/exclude/${DIR}" ] - then - for EMPTYDIR in `cat "/etc/conf.d/exclude/${DIR}"` - do - mkdir -p "${shmdir}/${EMPTYDIR}" - chmod --reference="${SUBDIR}" "${shmdir}/${SUBDIR}" - done - fi - - umount -n "${DIR}" > /dev/null - mount -n -o bind "${shmdir}/${DIR}" "${DIR}" - done - - mkdir -p "${shmdir}/tmp" - chmod 0777 "${shmdir}/tmp" - mount -n -o bind "${shmdir}/tmp" /tmp - - cat /proc/mounts > /etc/mtab - - cp -f /etc/inittab.node /etc/inittab - [ -e /etc/fstab.node ] && cp -f /etc/fstab.node /etc/fstab - killall -1 init - - eend 0 -} - -# char *KV_major(string) -# -# Return the Major version part of given kernel version. -# -KV_major() { - [ -z "$1" ] && return 1 - - local KV="`echo $1 | \ - awk '{ tmp = $0; gsub(/^[0-9\.]*/, "", tmp); sub(tmp, ""); print }'`" - echo "${KV}" | awk -- 'BEGIN { FS = "." } { print $1 }' -} - -# char *KV_minor(string) -# -# Return the Minor version part of given kernel version. -# -KV_minor() { - [ -z "$1" ] && return 1 - - local KV="`echo $1 | \ - awk '{ tmp = $0; gsub(/^[0-9\.]*/, "", tmp); sub(tmp, ""); print }'`" - echo "${KV}" | awk -- 'BEGIN { FS = "." } { print $2 }' -} - -# char *KV_micro(string) -# -# Return the Micro version part of given kernel version. -# -KV_micro() { - [ -z "$1" ] && return 1 - - local KV="`echo $1 | \ - awk '{ tmp = $0; gsub(/^[0-9\.]*/, "", tmp); sub(tmp, ""); print }'`" - echo "${KV}" | awk -- 'BEGIN { FS = "." } { print $3 }' -} - -# int KV_to_int(string) -# -# Convert a string type kernel version (2.4.0) to an int (132096) -# for easy compairing or versions ... -# -KV_to_int() { - [ -z "$1" ] && return 1 - - local KV_MAJOR="`KV_major "$1"`" - local KV_MINOR="`KV_minor "$1"`" - local KV_MICRO="`KV_micro "$1"`" - local KV_int="$((KV_MAJOR * 65536 + KV_MINOR * 256 + KV_MICRO))" - - # We make version 2.2.0 the minimum version we will handle as - # a sanity check ... if its less, we fail ... - if [ "${KV_int}" -ge 131584 ] - then - echo "${KV_int}" - - return 0 - else - return 1 - fi -} - -# int get_KV() -# -# return the kernel version (major, minor and micro concated) as an integer -# -get_KV() { - local KV="`uname -r 2> /dev/null`" - - echo "`KV_to_int ${KV}`" - - return $? -} - -# bool get_bootparam(param) -# -# return 0 if gentoo=param was passed to the kernel -# -# EXAMPLE: if get_bootparam "nodevfs" ; then .... -# -get_bootparam() { - local copt="" - local parms="" - local retval=1 - - for copt in `cat /proc/cmdline` - do - if [ "${copt%=*}" = "gentoo" ] - then - params="`gawk -v PARAMS="${copt##*=}" ' - BEGIN { - split(PARAMS, nodes, ",") - for (x in nodes) - print nodes[x] - }'`" - - # Parse gentoo option - for x in ${params} - do - if [ "${x}" = "$1" ] - then - echo YES - retval=0 - fi - done - fi - done - return ${retval} -} - -# Safer way to list the contents of a directory, -# as it do not have the "empty dir bug". -# -# char *dolisting(param) -# -# print a list of the directory contents -# -# NOTE: quote the params if they contain globs. -# also, error checking is not that extensive ... -# -dolisting() { - local x="" - local y="" - local tmpstr="" - local mylist="" - local mypath="${*}" - - if [ "${mypath%/\*}" != "${mypath}" ] - then - mypath="${mypath%/\*}" - fi - for x in ${mypath} - do - if [ ! -e ${x} ] - then - continue - fi - if [ ! -d ${x} ] && ( [ -L ${x} -o -f ${x} ] ) - then - mylist="${mylist} `ls ${x} 2> /dev/null`" - else - if [ "${x%/}" != "${x}" ] - then - x="${x%/}" - fi - cd ${x} - tmpstr="`ls`" - for y in ${tmpstr} - do - mylist="${mylist} ${x}/${y}" - done - fi - done - echo "${mylist}" -} - -# void save_options(char *option, char *optstring) -# -# save the settings ("optstring") for "option" -# -save_options() { - local myopts="$1" - shift - if [ ! -d ${svcdir}/options/${myservice} ] - then - install -d -m0755 ${svcdir}/options/${myservice} - fi - echo "$*" > ${svcdir}/options/${myservice}/${myopts} -} - -# char *get_options(char *option) -# -# get the "optstring" for "option" that was saved -# by calling the save_options function -# -get_options() { - if [ -f ${svcdir}/options/${myservice}/$1 ] - then - cat ${svcdir}/options/${myservice}/$1 - fi -} - -# Prelim code to add bootsplash support to Gentoo :) -rc_splash() { - test -f /proc/splash || return 0 - if [ -n "`grep 'splash=silent' /proc/cmdline 2>/dev/null`" ]; then - /sbin/splash "$1" - export progress=$(( ${progress} + 1 )) - fi -} - -# Allows us to save variable info between runlevels (ie. rc iterations) -save_splash_info() { - if [ -f /proc/splash ]; then - echo ${sscripts} > ${svcdir}/sscripts.tmp - echo ${progress} > ${svcdir}/progress.tmp - fi -} - -# Retrieve splash state info -get_splash_info() { - if [ -f /proc/splash ]; then - export sscripts=`cat ${svcdir}/sscripts.tmp` - export progress=`cat ${svcdir}/progress.tmp` - fi -} - -# vim:ts=4 diff --git a/src/livecd/profiles/aa/aux-files/gentoo.jpg b/src/livecd/profiles/aa/aux-files/gentoo.jpg Binary files differdeleted file mode 100644 index 21bb66a5df..0000000000 --- a/src/livecd/profiles/aa/aux-files/gentoo.jpg +++ /dev/null diff --git a/src/livecd/profiles/aa/aux-files/hosts b/src/livecd/profiles/aa/aux-files/hosts deleted file mode 100644 index 4da3032548..0000000000 --- a/src/livecd/profiles/aa/aux-files/hosts +++ /dev/null @@ -1,11 +0,0 @@ -# -# hosts This file describes a number of hostname-to-address -# mappings for the TCP/IP subsystem. It is mostly -# used at boot time, when no name servers are running. -# On small systems, this file can be used instead of a -# "named" name server. Just add the names, addresses -# and any aliases to this file... -# - -127.0.0.1 localhost -192.168.1.2 cdimage diff --git a/src/livecd/profiles/aa/aux-files/hotplug b/src/livecd/profiles/aa/aux-files/hotplug deleted file mode 100644 index dddcfb0084..0000000000 --- a/src/livecd/profiles/aa/aux-files/hotplug +++ /dev/null @@ -1,54 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2003 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# /space/gentoo/cvsroot/gentoo-x86/sys-apps/hotplug/files/hotplug.rc,v 1.2 2002/02/25 23:02:14 woodchip Exp - -HILITE="\033[1m" -NORMAL="\033[0m" - -depend() { - need modules -} - -checkconfig() { - if [ ! -d /etc/hotplug ] ; then - eerror "Hotplug requires scripts & configs in /etc/hotplug!" - return 1 - fi -} - -start() { - CMDLINE="`cat /proc/cmdline`" - for x in $CMDLINE - do - if [ "$x" = "nodetect" ] - then - ebegin "Skipping USB and PCI hotplugging (nodetect option)" - return 0 - elif [ "$x" = "nohotplug" ] - then - ebegin "Skipping USB and PCI hotplugging (nohotplug option)" - return 0 - fi - done - local error - checkconfig || return 1 - ebegin "Starting USB and PCI hotplugging" - echo "0" > /proc/sys/kernel/printk - for RC in /etc/hotplug/*.rc - do - $RC start > /dev/null 2>&1 - done - echo "6" > /proc/sys/kernel/printk - eend -} - -stop() { - local error - ebegin "Stopping USB and PCI hotplugging" - for RC in /etc/hotplug/*.rc - do - $RC stop - done - eend -} diff --git a/src/livecd/profiles/aa/aux-files/hwsetup b/src/livecd/profiles/aa/aux-files/hwsetup deleted file mode 100644 index 55900b31f9..0000000000 --- a/src/livecd/profiles/aa/aux-files/hwsetup +++ /dev/null @@ -1,49 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/aa/aux-files/Attic/hwsetup,v 1.1 2003/10/19 03:10:50 livewire Exp $ - -HILITE="\033[1m" -NORMAL="\033[0m" - -DETECT="yes" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "nodetect" ] - then - DETECT="no" - fi -done - -depend() { - after checkfs - after local -} - -blurb() { - echo -ne ${HILITE}${1} - #blurblen=${#1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} -start() { - ebegin "Hardware detection" - -if [ "$DETECT" = "yes" ] - then - # Disable kernel messages to console: - echo "0" > /proc/sys/kernel/printk - /etc/init.d/autoconfig - eend - fi - -} - -stop() { - return -} - -# vim:ts=4 diff --git a/src/livecd/profiles/aa/aux-files/inittab b/src/livecd/profiles/aa/aux-files/inittab deleted file mode 100644 index f2218e4087..0000000000 --- a/src/livecd/profiles/aa/aux-files/inittab +++ /dev/null @@ -1,47 +0,0 @@ -# -# inittab This file describes how the INIT process should set up -# the system in a certain run-level. -# -# Author: Miquel van Smoorenburg, <miquels@cistron.nl> -# Modified by: Patrick J. Volkerding, <volkerdi@ftp.cdrom.com> -# Modified by: Daniel Robbins, <drobbins@gentoo.org> -# -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/aa/aux-files/Attic/inittab,v 1.1 2003/10/19 03:10:50 livewire Exp $ - -# -# Default runlevel. - -id:3:initdefault: - -# System initialization (runs when system boots). -#DE:S12345:respawn:/sbin/devfsd /dev -fg -# Script to run when going single user (runlevel 1). -~~:S:wait:/sbin/sulogin - -si:S:sysinit:/sbin/rc sysinit -l0:0:wait:/sbin/rc shutdown -l1:1:wait:/sbin/rc single -l2:2:wait:/sbin/rc nonetwork -l3:3:wait:/sbin/rc default -l4:4:wait:/sbin/rc default -l5:5:wait:/sbin/rc default -l6:6:wait:/sbin/rc reboot -z6:6:respawn:/sbin/sulogin - -# TERMINALS -c1:12345:respawn:/sbin/mingetty --noclear --autologin root tty1 -#c2:12345:respawn:/sbin/mingetty --noclear --autologin root tty2 -#c3:12345:respawn:/sbin/mingetty --noclear --autologin root tty3 -#c4:12345:respawn:/sbin/mingetty --noclear --autologin root tty4 - -# What to do at the "Three Finger Salute". -ca:12345:ctrlaltdel:/sbin/shutdown -r now - -# Used by /etc/init.d/xdm to control DM startup. -# Read the comments in /etc/init.d/xdm for more -# info. Do NOT remove, as this will start nothing -# extra at boot if /etc/init.d/xdm is not added -# to the "default" runlevel. -x:a:once:/etc/X11/startDM.sh - -# End of /etc/inittab diff --git a/src/livecd/profiles/aa/aux-files/install.txt b/src/livecd/profiles/aa/aux-files/install.txt deleted file mode 100644 index c6df3c24af..0000000000 --- a/src/livecd/profiles/aa/aux-files/install.txt +++ /dev/null @@ -1,1482 +0,0 @@ - - Gentoo Linux 1.4_rc2 and 1.4_rc3 Installation Instructions - Contents: - [1. About the Install................................................. - .................] - - 1.About the Install - - This new boot CD will boot from nearly any modern IDE CD-ROM drive, as - well as many SCSI CD-ROM, assuming that your CD-ROM and BIOS both - support booting. Included on the CD-ROM is Linux support for IDE (and - PCI IDE) (built-in to the kernel) as well as support for all SCSI - devices (available as modules.) In addition, we provide modules for - literally every kind of network card that Linux supports, as well as - tools to allow you to configure your network and establish outbound - (as well as inbound) ssh connections and download files. - - To install from the build CD, you will need to have a 486+ processor - and ideally at least 64 Megabytes of RAM. (Gentoo Linux has been - successfully built with 64MB of RAM + 64MB of swap space, but the - build process is awfully slow under those conditions.) - - Gentoo Linux can be installed using one of three "stage" tarball - files. The one you choose depends on how much of the system you want - to compile yourself. The stage1 tarball is used when one wants to - bootstrap and build the entire system from scratch. The stage2 tarball - is used for building the entire system from scratch, except for the - bootstrap part which is already performed for you. And the stage3 - tarball already contains a basic Gentoo Linux system that has been - optimized for your system. - - So, how does one begin the install process? First, you'll want to - decide which one of our LiveCD ISO images to grab from - [3]http://www.ibiblio.org/gentoo/releases/1.4_rc2/x86/. In this - directory, you'll see several subdirectories such as athlon for each - of our various architecture-specific builds. Here's a low-down on each - arch directory and what it contains: - Architecture Description - x86 Stage 1 tarballs and "gentoo-basic" liveCD -- will work on - anything. - i586 Stage 2 and 3 tarballs, GRP packages and liveCD for i586+ CPUs - i686 Stage 2 and 3 tarballs, GRP packages and liveCD for i686+ CPUs - athlon Stage 2 and 3 tarballs, GRP packages and liveCD for AMD Athlon - CPUs - athlon-xp Stage 2 and 3 tarballs, GRP packages and liveCD for AMD - Athlon XP CPUs - athlon-mp Stage 2 and 3 tarballs, GRP packages and liveCD for AMD - Athlon MP CPUs - pentium3 Stage 2 and 3 tarballs, GRP packages and liveCD for Intel - Pentium III and Pentium 4 CPUs - - Inside each of these directories, you'll find a livecd/ directory that - contains LiveCDs. While these LiveCDs will boot on any architecture, - the install-related tarballs are optimized for a particular CPU type - and will not work on all systems, except for the "gentoo-basic" LiveCD - in the x86 directory which can be used to install on anything. - - The LiveCDs are full CD images that should be burned to a CDR or CD-RW - using CD burning software. Currently, we have two types of LiveCDs. - The first carries the "gentoo-basic" label, and is approximately 40MB - in size and lives in the x86/livecd/ directory. This LiveCD is of - minimal size to allow for a initial quick download and contains a - stage1 tarball that can be found in /mnt/cdrom/gentoo/ after the CD - has booted. - - The second flavor of LiveCD we currently offer is labelled - "livecd-grp." These CDs (found in their respective arch/livecd - directories) contain stage1, 2 and 3 tarballs, and also contain a set - of GRP packages optimized for a specific architecture. GRP is simply - precompiled packages for very large applications, such as XFree86. - KDE, GNOME, OpenOffice, etc. Using these LiveCDs, it will be possible - for you to install a fully-functional Gentoo Linux system very - quickly. The downside is that these ISO images are large -- around - 600MB -- so they can take a while to download. - If for some reason your install gets interrupted at some point, you - can reboot and restart. For example, if you have partitioned, - installed the stageX tarball, and are ready to chroot, you can restart - the install if necessary. Just re-boot with the LiveCD, then mount - your drives/partitions to /mnt as normal. Basically, you can do this - at about any point during the install, just not before partitioning - for obvious reasons. - - Warning: If you encounter a problem with any part of the install and - wish to report it as a bug, report it to [4]http://bugs.gentoo.org. If - the bug needs to be moved upstream to the package maintainers (ie KDE) - the developers will take care of that. - - Now, let's quickly review the install process. First, we'll download, - burn and boot a LiveCD. After getting a root prompt, we'll create - partitions, create our filesystems, and extract either a stage1, - stage2 or stage3 tarball. If we are using a stage1 or stage2 tarball, - we will take the appropriate steps to get our systems to stage3. Once - our systems are at stage3, we can configure them (tweaking config - files, installing a bootloader, etc) and boot them and have a - fully-functional Gentoo Linux system. Depending on what stage of the - build process you're starting from, here's what's required for - installation: - stage tarball requirements for installation - 1 partition/filesystem setup, emerge sync, bootstrap, emerge system, - emerge linux sources, final configuration - 2 partition/filesystem setup, emerge sync, emerge system, emerge linux - sources, final configuration - 3 partition/filesystem setup, emerge sync, final configuration - - 2.Booting - - Start by booting the LiveCD. If detected properly, you should see a - fancy boot screen with the Gentoo Linux logo on it. At this screen, - you can hit Enter to begin the boot process, hit F2 for help, or pass - kernel boot options by typing gentoo opt1 opt2, etc. Once you hit - Enter, you'll be greeted with a lot of text output followed by the - normal Gentoo Linux boot sequence. You will be automatically logged in - as "root" and the root password will be set to a random string for - security purposes. You should have a root ("#") prompt on the current - console, and can also open new root consoles by pressing Alt-F2, - Alt-F3 and Alt-F4. Get back to the one you started on by pressing (you - guessed it) Alt-F1. - - You've probably also noticed that above your # prompt is a bunch of - help text explaining how to do things like configure your network - devices and where you can find the Gentoo Linux stage tarballs and - packages on your CD. - - 3.Load Kernel Modules - - If the PCI autodetection missed some of your hardware, you will have - to load the appropriate modules manually. To view a list of all - available network card modules, type ls - /lib/modules/*/kernel/drivers/net/*. To load a particular module, - type: - - Code listing 3.1: PCI Modules Configuration -# modprobe pcnet32 -(replace pcnet32 with your NIC module) - - Now, if you want to be able to access any SCSI hardware that wasn't - detected during the initial boot autodetection process, you'll need to - load the appropriate modules from /lib/modules, again using modprobe: - - Code listing 3.2: Loading SCSI Modules -# modprobe aic7xxx -# modprobe sd_mod - - aic7xxx supports your SCSI controller and sd_mod supports SCSI hard - disks. - - Note: Support for a SCSI CD-ROMs and disks are built-in in the kernel. - - If you are using hardware RAID, you'll need to load the ATA-RAID - modules for your RAID controller. - - Code listing 3.3: Loading RAID Modules - -# modprobe ataraid -# modprobe pdcraid - (Promise Raid Controller) -# modprobe hptraid - (Highpoint Raid Controller) - - The Gentoo LiveCD should have enabled DMA on your disks, but if it did - not, hdparm can be used to set DMA on your drives. - - Code listing 3.4: Setting DMA -Replace hdX with your disk device. -# hdparm -d 1 /dev/hdX Enables DMA -# hdparm -d1 -A1 -m16 -u1 -a64 /dev/hdX Enables DMA and other safe performance- -enhancing options -# hdparm -X66 /dev/hdX Force-enables Ultra-DMA -- dangerous -- may cause some d -rives to mess up - - 4.Loading PCMCIA Kernel Modules - - If you have a PCMCIA network card, you will need to do some additional - trickery. - - Warning: To avoid problems with cardmgr, you must run it before you - enter the chroot portion of the install. - - Code listing 4.1: Loading PCMCIA Modules -# modprobe pcmcia_core -# modprobe i82365 -# modprobe ds -# cardmgr -f - - As cardmgr detects which hardware is present, your speaker should emit - a few reassuring beeps, and your PCMCIA network card should hum to - life. You can of course insert the PCMCIA card after loading cardmgr - too, if that's preferable. (Technically, you need not run cardmgr if - you know exactly which module your PCMCIA card requires. But if you - don't, loading all PCMCIA modules and see which sticks won't work, as - all PCMCIA modules load obligingly and hang around for a PCMCIA card - to drop by. cardmgr will also unload the module(s) for any card when - you remove it). - - 5.Configuring Networking - - PPPoE configuration - - Assuming you need PPPoE to connect to the internet, the livecd (any - version) has made things easy for you by including rp-pppoe. Use the - provided adsl-setup script to configure your connection. You will be - prompted for the ethernet device that is connected to your adsl modem, - your username and password, the IPs of your DNS servers, and if you - need a basic firewall or not. - - Code listing 5.1: Configuring PPPoE -# adsl-setup -# adsl-start - - If something goes wrong, double-check that you correctly typed your - username and password by looking at /etc/ppp/pap-secrets or - /etc/ppp/chap-secrets, and make sure you are using the right ethernet - device. - - Automatic Network Configuration - - The Gentoo Linux install lets you configure a working network, - allowing you to use ssh, scp, lynx, irssi or wget as needed before - even beginning the installation process. Even if you don't need to do - these things now, you should go ahead and set up networking now. Once - networking is up, Portage will be able to use your configured network - once you are inside the chroot environment (required for installing - Gentoo Linux). The simplest way to set up networking is to run our new - net-setup script. - - Code listing 5.2: Net-Setup Script - # net-setup eth0 - - Of course, if you prefer, you may still set up networking manually. - - Manual DHCP Configuration - - Network configuration is simple with DHCP; If your ISP is not using - DHCP, skip down to the static configuration section below. - - Code listing 5.3: Network configuration with DHCP - # dhcpcd eth0 - - Note: Some ISPs require you to provide a hostname. To do that, add a - -h myhostname flag to the dhcpcd command line above. - - If you receive dhcpConfig warnings, don't panic; the errors are most - likely cosmetic. Skip down to Network testing below. - - Manual Static Configuration - - We need to setup just enough networking so that we can download - sources for the system build, as well as the required localhost - interface. Type in the following commands, replacing $IFACE with your - network interface (typically eth0), $IPNUM with your IP address, - $BCAST with your broadcast address, and $NMASK with your network mask. - For the route command, replace $GTWAY with your default gateway. - - Code listing 5.4: Static IP Network Configuration -# ifconfig $IFACE $IPNUM broadcast $BCAST netmask $NMASK -# /sbin/route add -net default gw $GTWAY netmask 0.0.0.0 metric 1 - - Now it's time to create the /etc/resolv.conf file so that name - resolution (finding Web/FTP sites by name, rather than just by IP - address) will work. - - Here's a template to follow for creating your /etc/resolv.conf file: - - Code listing 5.5: /etc/resolv.conf template -domain mydomain.com -nameserver 10.0.0.1 -nameserver 10.0.0.2 - - Replace 10.0.0.1 and 10.0.0.2 with the IP addresses of your primary - and secondary DNS servers respectively. - - Proxy Configuration - - If you are behind a proxy, it is necessary to configure your proxy - before you continue. We will export some variables to set up the proxy - accordingly. - - Code listing 5.6: Setting a Proxy -# export http_proxy="machine.company.com:1234" -# export ftp_proxy="$http_proxy" -# export RSYNC_PROXY="$http_proxy" - - Network Testing - - Now that your network has been configured, the /sbin/ifconfig -a - command should show that your network card is working (look for UP and - RUNNING in the output). - - Code listing 5.7: /sbin/ifconfig for a working network card -eth0 Link encap:Ethernet HWaddr 00:50:BA:8F:61:7A - inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0 - inet6 addr: fe80::50:ba8f:617a/10 Scope:Link - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:1498792 errors:0 dropped:0 overruns:0 frame:0 - TX packets:1284980 errors:0 dropped:0 overruns:0 carrier:0 - collisions:1984 txqueuelen:100 - RX bytes:485691215 (463.1 Mb) TX bytes:123951388 (118.2 Mb) - Interrupt:11 - - You may want to also try pinging your ISP's DNS server (found in - /etc/resolv.conf), and a website of choice, just to make sure that - your packets are reaching the net, DNS name resolution is working - correctly, etc. - - Code listing 5.8: Further Network Testing - # ping www.some_website.com - - Networking is go! - - Networking should now be configured and useable. You should be able to - use the included ssh, scp, lynx, irssi and wget commands to connect to - other machines on your LAN or the Internet. - - 6.Partition Configuration - - Now that the kernel can see the network card and disk controllers, - it's time to set up disk partitions for Gentoo Linux. - - Here's a quick overview of the standard Gentoo Linux partition layout. - We're going to create at least three partitions: a swap partition, a - root partition (to hold the bulk of Gentoo Linux), and a special boot - partition. The boot partition is designed to hold the GRUB or LILO - boot loader information as well as your Linux kernel(s). The boot - partition gives us a safe place to store everything related to booting - Linux. During normal day-to-day Gentoo Linux use, your boot partition - should remain unmounted. This prevents your kernel from being made - unavailable to GRUB (due to filesystem corruption) in the event of a - system crash, preventing the chicken-and-egg problem where GRUB can't - read your kernel (since your filesystem isn't consistent) but you - can't bring your filesystem back to a consistent state (since you - can't boot!) - - Now, on to filesystem types. Right now, you have five filesystem - options: XFS, ext2, ext3 (journaling), jfs, and ReiserFS. ext2 is the - tried and true Linux filesystem but doesn't have metadata journaling. - ext3 is the new version of ext2 with both metadata journaling and - ordered data writes, effectively providing data journaling as well. - ReiserFS is a B*-tree based filesystem that has very good small file - performance, and greatly outperforms both ext2 and ext3 when dealing - with small files (files less than 4k), often by a factor of 10x-15x. - ReiserFS also scales extremely well and has metadata journaling. As of - kernel 2.4.18+, ReiserFS is finally rock-solid and highly recommended. - XFS is a filesystem with metadata journaling that is fully supported - under Gentoo Linux's xfs-sources kernel, but is generally not - recommended due to its tendency to lose recently-modified data if your - system locks up or unexpectedly reboots (due to a power failure, for - instance.) Finially, jfs is IBM's own high performance journaling - filesystem. Since it is obscure, we cannot comment either positvely - nor negatively on its stability. - - If you're looking for the most standard filesystem, use ext2. If - you're looking for the most rugged journalled filesystem, use ext3. If - you're looking for a high-performance filesystem with journaling - support, use ReiserFS; both ext3 and ReiserFS are mature and refined. - Here are our basic recommended filesystem sizes and types: - Partition Size Type example device - boot partition, containing kernel(s) and boot information 100 - Megabytes ext2/3 highly recommended (easiest); if ReiserFS then mount - with -o notail /dev/hda1 - swap partition (no longer a 128 Megabyte limit) Generally, unless you - are running a server, swapspace can be pretty flexible. Please consult - the below table for some loose guidelines on swap space. Linux swap - /dev/hda2 - root partition, containing main filesystem (/usr, /home, etc) >=1.5 - Gigabytes ReiserFS, ext3 recommended; ext2 ok /dev/hda3 - Physical RAM Swapspace Size - 0-48MB RAM 048-064MB RAM 064MB-128MB RAM 128-256MB RAM 256-512MB RAM - 720MB 702MB 640MB 256MB - - Before creating filesystems, you may want to initialize the beginning - of your HD using dd. Doing this will ensure that your new filesystem - will not be mis-indentified by Linux's mounting code. This can be done - as follows: - - Code listing 6.1: Initializing first 1024 Sectors of HD -# dd if=/dev/zero of=/dev/hdxy bs=1K count=1 -Replace /dev/hdxy with the device you wish to "clean." - - Warning: The command above will destroy all data from /dev/hdxy. Be - careful and check twice which partition you specify for zeroing. If - you make a mistake it might result in a loss of data. - - At this point, create your partitions using fdisk. Note that your - partitions should be of type 82 if swap and 83 for regular filesystems - (whether ReiserFS, ext2/3 or other). - - Note: cfdisk is included on the install CD, and it is considerably - easier to use than fdisk. Just type cfdisk to run it; by default, - cfdisk will work with /dev/hda. If /dev/hda is not the hard disk you - want to partition, give the right value to cfdisk as a parameter. For - example: cfdisk /dev/hde - - Note: If fdisk or cfdisk instruct you to do so, please reboot to allow - your system to detect the new partition configuration. - - Note: If you are using RAID your partitions will be a little - different. You will have the partitions like this: - /dev/ataraid/discX/partY X is the arrays you have made, so if you only - have made 1 array, then it will be disc0.Y is the partition number as - in /dev/hdaY - - Once you've created your partitions, it's time to initialize the - filesystems that will be used to house our data. Initialize swap as - follows: - - Code listing 6.2: Initializing Swap - # mkswap /dev/hda2 - - You can use the mke2fs command to create ext2 filesystems. - - Code listing 6.3: Creating an ext2 Filesystem - # mke2fs /dev/hda1 - - To create an XFS filesystem, use the mkfs.xfs command. - - Code listing 6.4: Creating a XFS Filesystem - # mkfs.xfs /dev/hda3 - - Note: You may want to add a couple of additional flags to the mkfs.xfs - command: -d agcount=3 -l size=32m. The -d agcount=3 command will lower - the number of allocation groups. XFS will insist on using at least 1 - allocation group per 4 GB of your partition, so, for example, if you - hava a 20 GB partition you will need a minimum agcount of 5. The -l - size=32m command increases the journal size to 32 Mb, increasing - performance. - - Warning: If you are installing an XFS partition over a previous - ReiserFS partition, later attempts to mount may fail without an - explicit mount -t xfs. The solution is to zero out the partition - before creating the XFS filesystem: dd if=/dev/zero of=/dev/hdx bs=1k. - - If you'd like to use ext3, you can create ext3 filesystems using - mke2fs -j. - - Code listing 6.5: Creating an ext3 Filesystem - # mke2fs -j /dev/hda3 - - Note: You can find out more about using ext3 under Linux 2.4 at - [5]http://www.zip.com.au/~akpm/linux/ext3/ext3-usage.html. - - To create ReiserFS filesystems, use the mkreiserfs command. - - Code listing 6.6: Creating a ReiserFS Filesystem - # mkreiserfs /dev/hda3 - - To create JFS filesystems, use the mkfs.jfs comamnd. - - Code listing 6.7: Creating a JFS Filesystem - # mkfs.jfs /dev/hda3 - - 7.Mount Partitions - - Now, we'll activate our new swap, since we may need the additional - virtual memory that provides later: - - Code listing 7.1: Activating Swap - # swapon /dev/hda2 - - Next, we'll create the /mnt/gentoo and /mnt/gentoo/boot mountpoints, - and we'll mount our filesystems to these mountpoints. - - Code listing 7.2: Creating Mount Points -# mkdir /mnt/gentoo -# mount /dev/hda3 /mnt/gentoo -# mkdir /mnt/gentoo/boot -# mount /dev/hda1 /mnt/gentoo/boot - - If you are setting up Gentoo Linux with a separate /usr or /var, these - would get mounted to /mnt/gentoo/usr and /mnt/gentoo/var, - respectively. - - Important: If your boot partition (the one holding the kernel) is - ReiserFS, be sure to mount it with the -o notail option so GRUB gets - properly installed. Make sure that notail ends up in your new - /etc/fstab boot partition entry, too. We'll get to that in a bit. - - Important: If you are having problems mounting your boot partition - with ext2, try using mount /dev/hXX /mnt/gentoo/boot -t ext2 - - 8.Obtaining the Desired 'stage-x' Tarball - - If you are using a GRP CD to install, you already have all of the - stage tarballs available on the CD. If this is the case, copy the - tarball of your choice to /mnt/gentoo - - Alternatively, if you do not have a GRP CD, the stage1 tarball is - still available on the CD in /mnt/cdrom/gentoo. You will have to - download the other stages though, and the best place to download those - to is /mnt/gentoo. - - Code listing 8.1: Downloading Required Stages -# cd /mnt/gentoo -Use lynx to get the URL for your tarball: -# lynx http://www.ibiblio.org/pub/Linux/distributions/gentoo/releases/1.4_rc2/x -86/ -Use Up and Down arrows keys (or the TAB key) to go to the right directory -Highlight the appropriate stage you want to download -Press d which will initiate the download -Save the file and quit the browser - -OR use wget from the command line: -# wget insert URL to the required stage tarball here. - - 9.Unpacking the Stage Tarballs - - Now it's time to extract the compressed stage tarball of your choice - to /mnt/gentoo. Then, we'll chroot over to the new Gentoo Linux build - installation to "enter" the new Gentoo Linux system. - - Important: Be sure to use the p option with tar. Forgetting to do this - will cause certain files to have incorrect permissions. - - If you are using the "from scratch, build everything" install method, - you will want to use the stage1-ix86-1.4_beta.tbz2 image. If you're - using one of our bigger CDs, you'll also have a choice of a stage2 and - stage3 image. These images allow you to save time at the expense of - configurability (we've already chosen compiler optimizations and - default USE variables for you.) - - Code listing 9.1: Unpacking the Stages -# cd /mnt/gentoo -# tar -xvjpf /mnt/cdrom/gentoo/stage?-*.tbz2 -# mount -o bind /proc /mnt/gentoo/proc - - -# cp /etc/resolv.conf /mnt/gentoo/etc/resolv.conf - - If you are going to use GRP, now would be a good time to execute the - following commands: - - Code listing 9.2: Getting ready for GRP -# mkdir /mnt/gentoo/GRP -# mount -o bind /mnt/cdrom/gentoo/packages /mnt/gentoo/GRP - - Code listing 9.3: Entering the chroot Environment -# chroot /mnt/gentoo /bin/bash -# env-update -Regenerating /etc/ld.so.cache... -# source /etc/profile -The above points your shell to the new paths and updated binaries. - - After you execute these commands, you'll be "inside" your new Gentoo - Linux environment. - - 10.Getting the Current Portage Tree using Rsync - - Now, you'll need to run emerge sync. This will make sure that you have - the most current copy of the Portage tree. - - Code listing 10.1: Updating Using Rsync - -# emerge sync -# export CONFIG_PROTECT="-*" -# export USE="-* bootstrap build" -# emerge portage -# unset USE - - The Portage tree will be downloaded and stored in /usr/portage; it's - about 90Mb in size without tarballs. - - Note: The export CONFIG_PROTECT="-*" line ensures that any new scripts - installed to /etc will overwrite the old scripts (stored in - sys-apps/baselayout), bypassing Portage's new config file management - support. Type emerge --help config for more details. - - 11.Setting Gentoo optimizations (make.conf) - - Now that you have a working copy of the Portage tree, people using - stage1 to install will need to bootstrap their Gentoo Linux system as - follows. First edit the file /etc/make.conf. In this file, you should - set your USE flags, which specify optional functionality that you - would like to be built into packages; generally, the defaults (an - empty or unset USE variable) are fine. More information on USE flags - can be found [6]here. A complete list of current USE flags can be - found [7]here. - - You also should set appropriate CHOST, CFLAGS and CXXFLAGS settings - for the kind of system that you are creating (commented examples can - be found further down in the file.) Your best friend is man gcc to - figure out what additional CFLAGS and CXXFLAGS are available. Search - for 'Optimization'. - - If necessary, you can also set proxy information here if you are - behind a firewall. - - Code listing 11.1: Setting make.conf Options - # nano -w /etc/make.conf (Adjust these settings) - - Note: People who need to substantially tweak the build process should - take a look at the /etc/make.globals file. This file comprises gentoo - defaults and should never be touched. If the defaults do not suffice, - then new values should be put in /etc/make.conf, as entries in - make.conf override the entries in make.globals. If you're interested - in tweaking USE settings, look in /etc/make.profile/make.defaults. If - you want to turn off any USE settings found here, add an appropriate - USE="-foo" in /etc/make.conf (to turn off the foo USE setting.) - - 12.Starting from Stage1 - - The stage1 tarball is for ultimate tweakage. If you have picked this - tarball, you are most likely looking to have an uber-optimized system. - Have fun, because optimization is what Gentoo Linux is all about! - - Now, it's time to start the "bootstrap" process. This process takes - about two hours on my 1200Mhz AMD Athlon system. During this time, the - extracted build image will be prepped for compiling the rest of the - system. The GNU compiler suite will be built, as well as the GNU C - library. These are time consuming builds and make up the bulk of the - bootstrap process. - - Code listing 12.1: Bootstrapping -# cd /usr/portage -# scripts/bootstrap.sh - - The "bootstrap" process will now begin. - - Note: Portage by default uses /var/tmp during package building, often - using several hundred megabytes of temporary storage. If you would - like to change where Portage stores these temporary files, set a new - PORTAGE_TMPDIR before starting the bootstrap process, as follows: - - Code listing 12.2: Changing Portage's Storage Path - # export PORTAGE_TMPDIR="/otherdir/tmp" - - bootstrap.sh will build binutils, gcc, gettext, and glibc, rebuilding - binutils, gcc, and gettext after glibc. Needless to say, this process - takes a while. Have a nice nap. Once this process completes, your - system will be equivalent to a "stage2" system, which means you can - now move on to the stage2 instructions. - - 13.Starting from Stage2 - - The stage2 tarball already has the bootstrapping done for you. All - that you have to do is install the rest of the system. - - Note: If you haven't done so, please edit /etc/make.conf to your - flavor. - - Code listing 13.1: Installing the Rest of the System -# emerge -p system - [lists the packages to be installed] -# emerge system - - It's going to take a while to finish building the entire base system. - Your reward is that it will be thoroughly optimized for your system. - The drawback is that you have to find a way to keep yourself occupied - for some time to come. The author suggests "Star Wars - Super Bombad - Racing" for the PS2. - - When this process completes, your system will be the equivalent of a - stage3 system. You have a couple of choices on how to continue at this - point. You can move onto the stage3 instructions and complete those. - Doing that will get your system right up to date with what is in the - current Portage tree. This is not necessary, but it is highly - recommended. If you do not choose to get up to date with the stage3 - instructions, you can move onto the GRP install section. If you do not - wish to use GRP, you can move onto [8]Chapter 16: Final Steps. - - 14.Starting from Stage3 - - The stage3 tarball is already configured for your system. There is not - much to do for this stage, but it is a very good idea to update your - system to the newest available packages. - - Note: If you have not already edited /etc/make.conf to fit your - specifications, now would be a good time to do so. - - Code listing 14.1: Getting up-to-date - # emerge sync - # emerge -up world - lists [packages] to be installed - # emerge -u world - - Once you complete this step, you have some options on how to continue. - If you are going to be using GRP, please move onto the GRP section. If - you are not going to use GRP, you may continue onto [9]Chapter 16: - Final Steps. - - 15.Using GRP - - You can take advantage of pre-built GRP package sets to avoid - compiling certain popular and large packages. Currently, we provide - full builds of everything you need for openoffice-bin, GNOME, KDE and - xfree. - - First, you will need to cd to the location of the packages directory. - We have already mounted the directory at /GRP. In that directory you - will find the grp-install.sh script, an All directory that contains - all of the binary packages, and a list of available GRP packages. To - install any/all of these package sets you should do the following: - - Code listing 15.1: Using GRP -# cd /GRP -# sh grp-install.sh <list of package lists> -where <list of package lists> may be any of the *-list.txt files found in the s -ame directory. - - grp-install.sh can be run multiple times without replacing existing - installations. You can do a sh grp-install.sh for a basic usage - description if you are still a bit foggy. - - 16.Setting your Timezone - - At this point, you should have system that's ready for final - configuration. We'll start the configuration process by setting the - timezone. By setting the timezone before building the kernel we ensure - that users get reasonable uname -a output. - - Look for your timezone (or GMT if you using Greenwich Mean Time) in - /usr/share/zoneinfo. Then, make a symbolic link by typing: - - Code listing 16.1: Creating a symbolic link for timezome - # ln -sf /usr/share/zoneinfo/path/to/timezonefile /etc/localtime - - You might also want to check /etc/rc.conf to make sure your timezone - settings are correct. - - 17.Installing the kernel and a System Logger - - Note: If you haven't done so, please edit /etc/make.conf to your - flavor. - - You now need to merge Linux source ebuilds. Here are the ones we - currently offer: - ebuild description - gentoo-sources Our own performance and functionality-enhanced kernel - does not include XFS support. - xfs-sources Highly-compatible kernel with XFS support. - openmosix-sources A stock Linux kernel source tree patched with - support for the GPL [10]openMosix load-balancing/clustering technology - usermode-sources A stock Linux kernel source tree patched with support - for User-Mode Linux. ("Linux inside Linux" technology) - vanilla-sources A stock Linux kernel source tree, just like you'd get - from kernel.org - - Warning: If you are configuring your own kernel, be careful with the - grsecurity option. Being too aggressive with your security settings - can cause certain programs (such as X) to not run properly. If in - doubt, leave it out. - - Choose a kernel and then merge as follows: - - Code listing 17.1: Emerging Kernel Sources - # emerge sys-kernel/gentoo-sources - - Once you have a Linux kernel source tree available, it's time to - compile your own custom kernel. - - Please note that /usr/src/linux is a symlink to your current emerged - kernel source package, which is set automatically by Portage at emerge - time. If you have multiple kernel source packages, it is necessary to - set the /usr/src/linux symlink to the correct one before proceeding. - - Code listing 17.2: Compiling the Linux Kernel -# cd /usr/src/linux -# source /etc/profile -Again, this updates your paths. If you get an error saying gcc is not found, -this is what you may have to do. -# make menuconfig -# make dep && make clean bzImage modules modules_install -# mv /boot/bzImage /boot/bzImage.orig -[if bzImage already exists] -# cp /usr/src/linux/arch/i386/boot/bzImage /boot - - Warning: For your kernel to function properly, there are several - options that you will need to ensure are in the kernel proper -- that - is, they should be enabled and not compiled as modules. You will need - to enable the "Code maturity level options --> Prompt for development - and/or incomplete code/drivers" option to see several of these - selections. Under the "File systems" section, be sure to enable the - "/dev" file system support (note that you don't need to enable the - "/dev/pts file system support" option). You'll also need to enable the - "Virtual Memory Filesystem". Be sure to enable "ReiserFS" if you have - any ReiserFS partitions; the same goes for "Ext3". If you're using - XFS, enable the "SGI XFS filesystem support" option. It's always a - good idea to leave ext2 enabled whether you are using it or not. Also, - most people using IDE hard drives will want to enable the "USE DMA by - default" option; otherwise, your IDE drives may perform very poorly. - Of course, remember to enable "IDE disk" support as well -- otherwise - your kernel won't be able to see your IDE disks. - - If you are using hardware RAID you will need to enable a couple more - options in the kernel: For Highpoint RAID controllers select hpt366 - chipset support, support for IDE RAID controllers and Highpoint 370 - software RAID.For Promise RAID controllers select PROMISE - PDC202{46|62|65|67|68|69|70} support, support for IDE RAID controllers - and Support Promise software RAID (Fasttrak(tm)) - - If you use PPPoE to connect to Internet, you will need the following - options in the kernel (built-in or as preferably as modules) : "PPP - (point-to-point protocol) support", "PPP support for async serial - ports", "PPP support for sync tty ports". The two compression options - won't harm but are not definitely needed, neither does the "PPP over - Ethernet" option, that might only be used by rp-pppoe when configured - to do kernel mode PPPoE. - - If you have an IDE cd burner, then you need to enable SCSI emulation - in the kernel. Turn on "ATA/IDE/MFM/RLL support" ---> "IDE, ATA and - ATAPI Block devices" ---> "SCSI emulation support" (I usually make it - a module), then under "SCSI support" enable "SCSI support", "SCSI - CD-ROM support" and "SCSI generic support" (again, I usually compile - them as modules). If you also choose to use modules, then echo -e - "ide-scsi\nsg\nsr_mod" >> /etc/modules.autoload to have them - automatically added at boot time. - - Note: For those who prefer it, it is now possible to install Gentoo - Linux with a 2.2 kernel. However, doing this comes at a price: you - will lose many of the nifty features that are new to the 2.4 series - kernels (such as XFS and tmpfs filesystems, iptables, and more), - although the 2.2 kernel sources can be patched with ReiserFS and devfs - support. Gentoo linux boot scripts require either tmpfs or ramdisk - support in the kernel, so 2.2 kernel users need to make sure that - ramdisk support is compiled in (ie, not a module). It is vital that a - gentoo=notmpfs flag be added to the kernel line in - /boot/grub/grub.conf for the 2.2 kernel so that a ramdisk is mounted - for the bootscripts instead of tmpfs. If you choose not to use devfs, - then gentoo=notmpfs,nodevfs should be used instead. - - Your new custom kernel (and modules) are now installed. Now you need - to choose a system logger that you would like to install. We offer - sysklogd, which is the traditional set of system logging daemons. We - also have msyslog and syslog-ng as well as metalog. Power users seem - to gravitate away from sysklogd (not very good performance) and - towards the newer alternatives. If in doubt, you may want to try - metalog, since it seems to be quite popular. To merge your logger of - choice, type one of the next four lines: - - Code listing 17.3: Emerging System Logger of Choice -# emerge app-admin/sysklogd -# rc-update add sysklogd default -or -# emerge app-admin/syslog-ng -# rc-update add syslog-ng default -or -# emerge app-admin/metalog -# rc-update add metalog default -or -# emerge app-admin/msyslog -# rc-update add msyslog default - - Warning: In the case of syslog-ng you need to create - /etc/syslog-ng/syslog-ng.conf. See /etc/syslog-ng for a sample - configuration file. - - Important: Metalog flushes output to the disk in blocks, so messages - aren't immediately recorded into the system logs. If you are trying to - debug a daemon, this performance-enhancing behavior is less than - helpful. When your Gentoo Linux system is up and running, you can send - metalog a USR1 signal to temporarily turn off this message buffering - (meaning that tail -f /var/log/everything/current will now work in - real time, as expected), and a USR2 signal to turn buffering back on - again. If you want to disable buffering permanently, you can change - METALOG_OPTS="-B" to METALOG_OPTS="-B -s" in /etc/conf.d/metalog. - - Now, you may optionally choose a cron package that you'd like to use. - Right now, we offer dcron, fcron and vcron. If you don't know which - one to choose, you might as well grab vcron. They can be installed as - follows: - - Code listing 17.4: Choosing a CRON Daemon -# emerge sys-apps/dcron -# crontab /etc/crontab -or -# emerge sys-apps/fcron -# crontab /etc/crontab -or -# emerge sys-apps/vcron -You do not need to run crontab /etc/crontab if using vcron. -Don't forget to add your *cron to the proper init level. -# rc-update add *cron default - - For more information on starting programs and daemons at startup, see - the [11]rc-script guide. - - 18.Installing miscellany necessary packages - - If you need rp-pppoe to connect to the net, be aware that at this - point it has not been installed. It would be the good time to do it. - - Code listing 18.1: Installing rp-pppoe - # USE="-X" emerge rp-pppoe - - Note: The USE="-X" prevents pppoe from installing its optional X - interface, which is a good thing, because X and its dependencies would - also be emerged. You can always recompile rp-pppoe with X support - later. - - Note: Please note that the rp-pppoe is built but not configured. You - will have to do it again using adsl-setup when you boot into your - Gentoo system for the first time. - - You may need to install some additional packages in the Portage tree - if you are using any optional features like XFS, ReiserFS or LVM. If - you're using XFS, you should emerge the xfsprogs package: - - Code listing 18.2: Emerging Filesystem Tools -# emerge sys-apps/xfsprogs -If you'd like to use ReiserFS, you should emerge the ReiserFS tools: -# emerge sys-apps/reiserfsprogs -If you'd like to use JFS, you should emerge the JFS tools: -# emerge jfsutils -If you're using LVM, you should emerge the lvm-user package: -# emerge sys-apps/lvm-user - - If you're a laptop user and wish to use your PCMCIA slots on your - first real reboot, you'll want to make sure you install the pcmcia-cs - package. - - Code listing 18.3: Emerging PCMCIA-cs - # emerge sys-apps/pcmcia-cs - - Warning: You will have to re-emerge pcmcia-cs after installation to - get PCMCIA to work. - - 19.Modifying /etc/fstab for your machine - - Your Gentoo Linux system is almost ready for use. All we need to do - now is configure a few important system files and install the GRUB - boot loader. The first file we need to configure is /etc/fstab. - Remember that you should use the notail option for your boot partition - if you chose to create a ReiserFS filesystem on it. Remember to - specify ext2, ext3 or reiserfs filesystem types as appropriate. - - Use something like the /etc/fstab listed below, but of course be sure - to replace "BOOT", "ROOT" and "SWAP" with the actual block devices you - are using (such as hda1, etc.) - - Code listing 19.1: Editing fstab -# /etc/fstab: static file system information. -# -# noatime turns off atimes for increased performance (atimes normally aren't -# needed; notail increases performance of ReiserFS (at the expense of storage -# efficiency). It's safe to drop the noatime options if you want and to -# switch between notail and tail freely. - -# <fs> <mountpoint> <type> <opts> <dump/pass> - -# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts. - -/dev/BOOT /boot ext2 noauto,noatime 1 2 -/dev/ROOT / ext3 noatime 0 1 -/dev/SWAP none swap sw 0 0 -/dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,ro 0 0 -proc /proc proc defaults 0 0 - - Warning: Please notice that /boot is NOT mounted at boottime. This is - to protect the data in /boot from corruption. If you need to access - /boot, please mount it! - - 20.Setting the Root Password - - Before you forget, set the root password by typing: - - Code listing 20.1: Setting the root Password - # passwd - - You will also want to add a non-root user for everyday use. Please - consult the [12]Gentoo FAQ. - - 21.Setting your Hostname - - Edit this file so that it contains your fully-qualified domain name on - a single line, i.e. mymachine.mydomain.com. - - Code listing 21.1: Configuring Hostname - # echo mymachine.mydomain.com > /etc/hostname - - 22.Modifying /etc/hosts - - This file contains a list of ip addresses and their associated - hostnames. It's used by the system to resolve the IP addresses of any - hostnames that may not be in your nameservers. Here's a template for - this file: - - Code listing 22.1: Hosts Template -127.0.0.1 localhost -# the next line contains your IP for your local LAN, and your associated machin -e name -192.168.1.1 mymachine.mydomain.com mymachine - - Note: If you are on a DHCP network, it might be helpful to set - localhost to your machine's actual hostname. This will help GNOME and - many other programs in name resolution. - - 23.Final Network Configuration - - Add the names of any modules that are necessary for the proper - functioning of your system to /etc/modules.autoload file (you can also - add any options you need to the same line.) When Gentoo Linux boots, - these modules will be automatically loaded. Of particular importance - is your ethernet card module, if you happened to compile it as a - module: - - Code listing 23.1: /etc/modules.autoload -This is assuming that you are using a 3com card. - Check /lib/modules/`uname -r`/kernel/drivers/net for your card. - -3c59x - - Edit the /etc/conf.d/net script to get your network configured for - your first boot: - - Code listing 23.2: Boottime Network Configuration -# nano -w /etc/conf.d/net -# rc-update add net.eth0 default - - If you have multiple network cards you need to create additional - net.ethx scripts for each one (x = 1, 2, ...): - - Code listing 23.3: Multiple Network Interfaces -# cd /etc/init.d -# cp net.eth0 net.ethx -# rc-update add net.ethx default - - If you have a PCMCIA card installed, have a quick look into - /etc/init.d/pcmcia to verify that things seem all right for your - setup, then add this line to the top of /etc/init.d/net.ethx: - - Code listing 23.4: PCMCIA depend in /etc/init.d/net.ethx -depend() { - need pcmcia -} - - This makes sure that the PCMCIA drivers are autoloaded whenever your - network is loaded. - - 24.Final steps: Configure Basic Settings (including the international - keymap setting) - - Code listing 24.1: Basic Configuration - # nano -w /etc/rc.conf - - Follow the directions in the file to configure the basic settings. All - users will want to make sure that CLOCK is set to his/her liking. - International keyboard users will want to set the KEYMAP variable - (browse /usr/share/keymaps to see the various possibilities). - - 25.Configure a Bootloader - - Notes - - In the spirit of Gentoo, users now have more than one bootloader to - choose from. Using our virtual package system, users are now able to - choose between both GRUB and LILO as their bootloaders. - - Please keep in mind that having both bootloaders installed is not - necessary. In fact, it can be a hinderance, so please only choose one. - - Important: If you are installing Gentoo Linux on a system with an - NVIDIA nForce or nForce2 chipset with an integrated GeForce graphics - card, you should use LILO and avoid GRUB. With on-board video enabled, - the low memory area of your RAM is used as video RAM. Since GRUB also - uses low memory at boot time, it will experience an "out of memory" - condition. So, if you have an nForce or potentially other board with - on-board video, use LILO. Even if you're using off-board video right - now, it'd be nice to be able to remove the graphics card and use the - on-board video in a pinch, wouldn't it? :) - - Configuring GRUB - - The most critical part of understanding GRUB is getting comfortable - with how GRUB refers to hard drives and partitions. Your Linux - partition /dev/hda1 is called (hd0,0) under GRUB. Notice the - parenthesis around the hd0,0 - they are required. Hard drives count - from zero rather than "a", and partitions start at zero rather than - one. Be aware too that with the hd devices, only harddrives are - counted, not atapi-ide devices such as cdrom players, burners, and - that the same construct can be used with scsi drives. (Normally they - get higher numbers than ide drives except when the bios is configured - to boot from scsi devices.) Assuming you have a harddrive on /dev/hda, - a cdrom player on /dev/hdb, a burner on /dev/hdc and a second hardrive - on /dev/hdd, for example, and no scsi harddrive /dev/hdd7 gets - translated to (hd1,6). It might sound tricky, and tricky it is indeed, - but as we will see, grub offers a tab completion mechanism that comes - handy for those of you having a lot of harddrives and partitions and - who are a little lost in the grub numbering scheme. Having gotten the - feel for that, it's time to install GRUB. - - The easiest way to install GRUB is to simply type grub at your - chrooted shell prompt: - - Code listing 25.1: Installing GRUB -# emerge grub -# grub - - Important: If you are using hardware RAID this part will not work at - this time. Skip to the section on making your grub.conf. After that we - will complete the grub setup for RAID controllers - - You'll be presented with the grub> grub command-line prompt. Now, you - need to type in the right commands to install the GRUB boot record - onto your hard drive. In my example configuration, I want to install - the GRUB boot record on my hard drive's MBR (master boot record), so - that the first thing I see when I turn on the computer is the GRUB - prompt. In my case, the commands I want to type are: - - Code listing 25.2: GRUB on the MBR -grub> root (hd0,0) // Your boot partition -grub> setup (hd0) // Where the boot record is installed, here, it is the MBR - - Code listing 25.3: GRUB not on the MBR -Alternatively, if you wanted to install the bootloader somewhere other than the - MBR -grub> root (hd0,0) // Your boot partition -grub> setup (hd0,4) // Where the boot record is installed, here it is /dev/hda5 -grub> quit - - Here's how the two commands work. The first root ( ) command tells - GRUB the location of your boot partition (in our example, /dev/hda1 or - (hd0,0) in GRUB terminology. Then, the second setup ( ) command tells - GRUB where to install the boot record - it will be configured to look - for its special files at the root ( ) location that you specified. In - my case, I want the boot record on the MBR of the hard drive, so I - simply specify /dev/hda (also known as (hd0)). If I were using another - boot loader and wanted to set up GRUB as a secondary boot-loader, I - could install GRUB to the boot record of a particular partition. In - that case, I'd specify a particular partition rather than the entire - disk. Once the GRUB boot record has been successfully installed, you - can type quit to quit GRUB. - - Note: The tab completion mechanism of grub can be used from within - grub, assuming you wrote root ( and that you hit the TAB key, you - would be prompted with a list of the available devices (not only - harddrives), hitting the TAB key having written root (hd, grub would - print the available harddrives and hitting the TAB key after writing - root (hd0, would make grub print the list of partitions on the first - harddrive. Checking the syntax of the grub location with completion - should really help to make the right choice. - - Gentoo Linux is now installed, but we need to create the - /boot/grub/grub.conf file so that we get a nice GRUB boot menu when - the system reboots. Here's how to do it. - - Important: To ensure backwards compatibility with GRUB, make sure to - make a link from grub.conf to menu.lst. You can do this by doing ln -s - /boot/grub/grub.conf /boot/grub/menu.lst . - - Now, create the grub.conf file (nano -w /boot/grub/grub.conf), and add - the following to it: - - Code listing 25.4: Grub.conf for GRUB -default 0 -timeout 30 -splashimage=(hd0,0)/boot/grub/splash.xpm.gz - -title=My example Gentoo Linux -root (hd0,0) -kernel (hd0,0)/boot/bzImage root=/dev/hda3 - - #Below is for setup using hardware RAID -title=My Gentoo Linux on RAID -root (hd0,0) -kernel (hd0,0)/boot/bzImage root=/dev/ataraid/dXpY - -# Below needed only for people who dual-boot -title=Windows NT Workstation -root (hd0,5) -chainloader (hd0,5)+1 - - Note: (hd0,0) should be written without any spaces inside the - parentheses. - - Important: If you set up scsi emulation for an IDE cd burner earlier, - then to get it to actually work you need to add an "hdx=ide-scsi" - fragment to the kernel line in grub.conf (where "hdx" should be the - device for your cd burner). - - After saving this file, Gentoo Linux installation is complete. - Selecting the first option will tell GRUB to boot Gentoo Linux without - a fuss. The second part of the grub.conf file is optional, and shows - you how to use GRUB to boot a bootable Windows partition. - - Note: Above, (hd0,0) should point to your "boot" partition (/dev/hda1 - in our example config) and /dev/hda3 should point to your root - filesystem. (hd0,5) contains the NT boot loader. - - Note: The path to the kernel image is relative to the boot partition. - If for example you have separated boot partition (hd0,0) and root - partition (hd0,1), all paths in the grub.conf file above will become - /bzImage. - - If you need to pass any additional options to the kernel, simply add - them to the end of the kernel command. We're already passing one - option (root=/dev/hda3), but you can pass others as well. In - particular, you can turn off devfs by default (not recommended unless - you know what you're doing) by adding the gentoo=nodevfs option to the - kernel command. - - Note: Unlike in earlier versions of Gentoo Linux, you no longer have - to add devfs=mount to the end of the kernel line to enable devfs. In - rc6 devfs is enabled by default. - - Configuring LILO - - While GRUB may be the new alternative for most people, it is not - always the best choice. LILO, the LInuxLOader, is the tried and true - workhorse of Linux bootloaders. Here's how to install LILO if you - would like to use it instead of GRUB: - - The first step is to emerge LILO: - - Code listing 25.5: Emerging LILO - # emerge lilo - - Now it is time to configure LILO. I will give you a small lilo.conf to - use, and I will explain the different parts of the file. - - Code listing 25.6: Example lilo.conf -boot=/dev/hda -map=/boot/map -install=/boot/boot.b -prompt -timeout=50 -message=/boot/message -lba32 -default=linux - -image=/boot/vmlinuz-2.4.20 - label=linux - read-only - root=/dev/hda5 - -#For dual booting windows/other OS -other=/dev/hda1 - label=dos - - * boot=/dev/hda tells LILO to install itself on the first - hard disk on the first IDE controller. - * map=/boot/map states the map file. In normal use, this should not - be modified. - * install=/boot/boot.b tells LILO to install the specified file as - the new boot sector. In normal use, this should not be altered. If - the install line is missing, LILO will assume a default of - /boot/boot.b as the file to be used. - * The existence of prompt tells LILO to show you whatever is - referenced in the message line. While it is not recommended that - you remove the prompt line, if you do remove it, you can still get - a prompt by holding down the [Shift] key while your machine starts - to boot. - * timeout=50 sets the amount of time that LILO will wait for user - input before proceeding with booting the default line entry. This - is measured in tenths of a second, with 50 as the default. - * message=/boot/message refers to the screen that LILO displays to - let you select the operating system or kernel to boot. - * lba32 describes the hard disk geometry to LILO. Another common - entry here is linear. You should not change this line unless you - are very aware of what you are doing. Otherwise, you could put - your system in an unbootable state. - * default=linux refers to the default operating system for LILO to - boot from the options listed below this line. The name linux - refers to the label line below in each of the boot options. - * image=/boot/vmlinuz-2.4.20 specifies the linux kernel to boot with - this particular boot option. - * label=linux names the operating system option in the LILO screen. - In this case, it is also the name referred to by the default line. - * read-only specifies that the root partition (see the root line - below) is read-only and cannot be altered during the boot process. - * root=/dev/hda5 tells LILO what disk partition to use as the root - partition. - - Note: Thanks to [13]Redhat.com for this information. - - After you have edited your lilo.conf file, it is time to run LILO to - load the information into the MBR: - - Code listing 25.7: Running LILO - # /sbin/lilo - - LILO is configured, and now your machine is ready to boot into Gentoo - Linux! - - 26.Creating Bootdisks - - GRUB Bootdisks - - It is always a good idea to make a boot disk the first time you - install any Linux distribution. This is a security blanket, and - generally not a bad thing to do. If you are using some kinds of - hardware RAID, you may need make a GRUB boot disk. With these types of - hardware RAID, if you try to install grub from your chrooted shell it - will fail. If you are in this camp, make a GRUB boot disk, and when - you reboot the first time you can install GRUB to the MBR. Make your - bootdisk like this: - - Code listing 26.1: Creating a GRUB Bootdisk -# mke2fs /dev/fd0 -# mount /dev/fd0 /mnt/floppy -# mkdir -p /mnt/floppy/boot/grub -# cp /usr/share/grub/i386-pc/stage1 /mnt/floppy/boot/grub/ -# cp /usr/share/grub/i386-pc/stage2 /mnt/floppy/boot/grub/ -# umount /mnt/floppy -# grub - -grub> root (fd0) -grub> setup (fd0) -grub> quit - - Now reboot and load the floppy. At the floppy's grub> prompt, you can - now execute the necessary root and setup commands. - - LILO Bootdisks - - If you are using LILO, it is also a good idea to make a bootdisk: - - Code listing 26.2: Making a LILO Bootdisk -# dd if=/boot/your_kernel of=/dev/fd0 -This will only work if your kernel is smaller than 1.4MB - - 27.Installation Complete! - - Now, Gentoo Linux is installed. The only remaining step is to exit the - chrooted shell, update necessary configuration files, safely unmount - your partitions and reboot the system: - - Code listing 27.1: Rebooting the System -# etc-update -# exit -// This exits the chrooted shell; you can also type ^D -# cd / -# umount /mnt/gentoo/boot -# umount /mnt/gentoo/proc -# umount /mnt/gentoo/dev -# umount /mnt/gentoo -# reboot - - Note: After rebooting, it is a good idea to run the update-modules - command to create the /etc/modules.conf file. Instead of modifying - this file directly, you should generally make changes to the files in - /etc/modules.d. - - Important: Remember if you are running hardware RAID, you must use the - bootdisk for the first reboot. then go back and install grub the way - everyone else did the first time. You are done -- congratulations! - - If you have any questions or would like to get involved with Gentoo - Linux development, consider joining our gentoo-user and gentoo-dev - mailing lists (there's a "click to subscribe" link on our [14]main - page). We also have a handy [15]Desktop configuration guide that will - help you to continue configuring your new Gentoo Linux system, and a - useful [16]Portage user guide to help familiarize you with Portage - basics. You can find the rest of the Gentoo Documentation [17]here. If - you have any other questions involving installation or anything for - that matter, please check the Gentoo Linux [18]FAQ. Enjoy and welcome - to Gentoo Linux! - - 28.Gentoo-Stats - - The Gentoo Linux usage statistics program was started as an attempt to - give the developers a way to find out about their user base. It - collects information about Gentoo Linux usage to help us in set - priorities our development. Installing it is completely optional, and - it would be greatly appreciated if you decide to use it. Compiled - statistics can be viewed at [19]http://stats.gentoo.org/. - - The gentoo-stats server will assign a unique ID to your system. This - ID is used to make sure that each system is counted only once. The ID - will not be used to individually identify your system, nor will it be - mached against an IP address or other personal information. Every - precaution has been taken to assure your privacy in the development of - this system. The following are the things that we are monitoring right - now through our "gentoo-stats" program: - * installed packages and their version numbers - * CPU information: speed (MHz), vendor name, model name, CPU flags - (like "mmx" or "3dnow") - * memory information (total available physical RAM, total available - swap space) - * PCI cards and network controller chips - * the Gentoo Linux profile your machine is using (that is, where the - /etc/make.profile link is pointing to). - - We are aware that disclosure of sensitive information is a threat to - most Gentoo Linux users (just as it is to the developers). - * Unless you modify the gentoo-stats program, it will never transmit - sensitive information such as your passwords, configuration data, - shoe size... - * Transmission of your e-mail addresses is optional and turned off - by default. - * The IP address your data transmission originates from will never - be logged in such a way that we can identify you. There are no "IP - address/system ID" pairs. - - The installation is easy - just run the following commands: - - Code listing 28.1: Installing gentoo-stats -# emerge gentoo-stats // Installs gentoo-stats -# gentoo-stats --new // Obtains a new system ID - - The second command above will request a new system ID and enter it - into /etc/gentoo-stats/gentoo-stats.conf automatically. You can view - this file to see additional configuration options. - - After that, the program should be run on a regular schedule - (gentoo-stats does not have to be run as root). Add this line to your - crontab: - - Code listing 28.2: Updating gentoo-stats with cron - 0 0 * * 0,4 /usr/sbin/gentoo-stats --update > /dev/null - - The gentoo-stats program is a simple perl script which can be viewed - with your favortive pager or editor: /usr/sbin/gentoo-stats. - line - Updated 26 Feb 2003 - line - [20]Daniel Robbins - Chief Architect - Chris Houser - Author - [21]Jerry Alexandratos - Author - [22]Grant Goodyear - Ghost - [23]John P. Davis - Editor - [24]Pierre-Henri Jondot - Editor - [25]Eric Stockbridge - Editor - [26]Rajiv Manglani - Editor - [27]Jungmin Seo - Editor - [28]Stoyan Zhekov - Editor - line - Summary: These instructions step you through the process of installing - Gentoo Linux 1.4_rc2 and 1.4_rc3. The Gentoo Linux installation - process supports various installation approaches, depending upon how - much of the system you want to custom-build from scratch. - line - - Donate to support our development efforts. - Make payments with PayPal - it's fast, free and secure! - line - [29]Win4Lin at NeTraverse - - Win4Lin from NeTraverse lets you run Windows applications under Gentoo - Linux at native speeds. [30]Purchase Win4Lin "Gentoo Edition" and - you'll also get a special Gentoo discount. Every sale also helps - support Gentoo Linux development :) - line - [31]DDR Memory at Crucial.com - - Purchase RAM from Crucial.com and a percentage of your sale will go - towards further Gentoo Linux development. - line - Copyright 2001-2003 Gentoo Technologies, Inc. Questions, Comments, - Corrections? Email [32]www@gentoo.org. - -References - - 1. http://www.gentoo.org/ - 2. http://www.gentoo.org/ - 3. http://www.ibiblio.org/gentoo/releases/1.4_rc2/x86/ - 4. http://bugs.gentoo.org/ - 5. http://www.zip.com.au/~akpm/linux/ext3/ext3-usage.html - 6. http://www.gentoo.org/doc/en/use-howto.xml - 7. http://www.gentoo.org/dyn/use-index.xml - 8. http://www.gentoo.org/doc/en/gentoo-x86-install.xml#doc_chp16 - 9. http://www.gentoo.org/doc/en/gentoo-x86-install.xml#doc_chp16 - 10. http://www.openmosix.com/ - 11. http://www.gentoo.org/doc/en/rc-scripts.xml - 12. http://www.gentoo.org/doc/en/faq.xml - 13. http://www.redhat.com/ - 14. http://www.gentoo.org/ - 15. http://www.gentoo.org/doc/en/desktop.xml - 16. http://www.gentoo.org/doc/en/portage-user.xml - 17. http://www.gentoo.org/main/en/docs.xml - 18. http://www.gentoo.org/doc/en/faq.xml - 19. http://stats.gentoo.org/ - 20. mailto:drobbins@gentoo.org - 21. mailto:jerry@gentoo.org - 22. mailto:g2boojum@gentoo.org - 23. mailto:zhen@gentoo.org - 24. mailto:Pierre-Henri.Jondot@wanadoo.fr - 25. mailto:stocke2@gentoo.org - 26. mailto:rajiv@gentoo.org - 27. mailto:seo@gentoo.org - 28. mailto:zhware@gentoo.org - 29. http://www.netraverse.com/gentoo.htm - 30. http://www.netraverse.com/gentoo.htm - 31. http://www.qksrv.net/click-477620-5032687 - 32. mailto:www@gentoo.org diff --git a/src/livecd/profiles/aa/aux-files/local b/src/livecd/profiles/aa/aux-files/local deleted file mode 100644 index 2652a20b8f..0000000000 --- a/src/livecd/profiles/aa/aux-files/local +++ /dev/null @@ -1,82 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/aa/aux-files/Attic/local,v 1.1 2003/10/19 03:10:50 livewire Exp $ - -HILITE="\033[1m" -NORMAL="\033[0m" - -NET="no" -GAME="yes" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "forceloadnet" ] - then - NET="yes" - elif [ "$x" = "nogame" ] - then - GAME="no" - fi -done - -depend() { - before autoconfig -} - -blurb() { - echo -ne ${HILITE}${1} - #blurblen=${#1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} - -start() { - umount /initrd - /sbin/freeramdisk /dev/ram0 - #make our mtab look sane... - local mycdloc - mycdloc=`cat /tmp/mycd` - mycdloc=${mycdloc#/newroot*} - mount -f $mycdloc /mnt/cdrom -t iso9660 -o ro - if [ -e /mnt/livecd.cloop ] - then - mount -f /mnt/livecd.cloop /mnt/cloop -t ext2 -o ro - #cloop was cached to tmpfs so that CD could be unmounted. - else - mount -f /mnt/cdrom/livecd.cloop /mnt/cloop -t ext2 -o ro - fi - rm /tmp/mycd - mount -f tmpfs / -t tmpfs -o rw - - echo "10000" > /proc/sys/fs/file-max - echo root:`pwgen -s 16` | chpasswd > /dev/null 2>&1 - if [ "$NET" = "yes" ] - then - ebegin "Auto-detecting network modules" - # Disable kernel messages to console: - echo "0" > /proc/sys/kernel/printk - local x - for x in /lib/modules/*/kernel/drivers/net/* - do - y=${x##*/} - y=${y%%.*} - echo -ne " ${GOOD}*${NORMAL} Scanning for ${y}..." - insmod -f ${x} > /dev/null 2>&1 - backup - done - echo "6" > /proc/sys/kernel/printk - fi - if [ "$GAME" = "yes" ] - then - touch /etc/startgame - fi -} - -stop() { - return -} - -# vim:ts=4 diff --git a/src/livecd/profiles/aa/aux-files/localstart.gl b/src/livecd/profiles/aa/aux-files/localstart.gl deleted file mode 100644 index 8c6d384b88..0000000000 --- a/src/livecd/profiles/aa/aux-files/localstart.gl +++ /dev/null @@ -1,8 +0,0 @@ -# /etc/conf.d/local.start: -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/aa/aux-files/Attic/localstart.gl,v 1.1 2003/10/19 03:10:50 livewire Exp $ - -# This is a good place to load any misc. -# programs on startup ( 1>&2 ) - -modprobe nvidia && opengl-update nvidia && cp /etc/X11/xfree-nvidia /etc/X11/XF86Config -modprobe fglrx && opengl-update ati && cp /etc/X11/xfree-ati /etc/X11/XF86Config diff --git a/src/livecd/profiles/aa/aux-files/login.defs b/src/livecd/profiles/aa/aux-files/login.defs deleted file mode 100644 index 8225588ab9..0000000000 --- a/src/livecd/profiles/aa/aux-files/login.defs +++ /dev/null @@ -1,133 +0,0 @@ -# -# /etc/login.defs - Configuration control definitions for the login package. -# -# All items are optional - if not specified then the described action or -# option will be inhibited. -# -# Comment lines (lines beginning with "#") and blank lines are ignored. -# - -# -# Delay in seconds before being allowed another attempt after a login failure -# -FAIL_DELAY 3 - -# -# Enable logging and display of /var/log/faillog login failure info. -# -FAILLOG_ENAB yes - -# -# Enable display of unknown usernames when login failures are recorded. -# -LOG_UNKFAIL_ENAB no - -# -# Enable logging and display of /var/log/lastlog login time info. -# -LASTLOG_ENAB no - -# -# If defined, ":" delimited list of "message of the day" files to -# be displayed upon login. -# -MOTD_FILE /etc/motd -#MOTD_FILE /etc/motd:/usr/lib/news/news-motd - -# -# If defined, file which maps tty line to TERM environment parameter. -# Each line of the file is in a format something like "vt100 tty01". -# -TTYTYPE_FILE /etc/ttytype - -# -# If defined, login failures will be logged here in a utmp format. -# last, when invoked as lastb, will read /var/log/btmp, so... -# -FTMP_FILE /var/log/btmp - -# -# If defined, file which inhibits all the usual chatter during the login -# sequence. If a full pathname, then hushed mode will be enabled if the -# user's name or shell are found in the file. If not a full pathname, then -# hushed mode will be enabled if the file exists in the user's home directory. -# -HUSHLOGIN_FILE .hushlogin -#HUSHLOGIN_FILE /etc/hushlogins - -# -# The default PATH settings. -# -ENV_PATH /usr/local/bin:/usr/bin:/bin - -# -# The default PATH settings for root: -# -ENV_ROOTPATH /sbin:/bin:/usr/sbin:/usr/bin - -# -# The default PATH settings when su'ing to root: -# -ENV_SUPATH /sbin:/bin:/usr/sbin:/usr/bin - -# -# Terminal permissions -# -# TTYGROUP Login tty will be assigned this group ownership. -# TTYPERM Login tty will be set to this permission. -# -# If you have a "write" program which is "setgid" to a special group -# which owns the terminals, define TTYGROUP to the group number and -# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign -# TTYPERM to either 622 or 600. -# -TTYGROUP tty -TTYPERM 0600 - -# -# Password aging controls: -# -# PASS_MAX_DAYS Maximum number of days a password may be used. -# PASS_MIN_DAYS Minimum number of days allowed between password changes. -# PASS_MIN_LEN Minimum acceptable password length. -# PASS_WARN_AGE Number of days warning given before a password expires. -# -PASS_MAX_DAYS 99999 -PASS_MIN_DAYS 0 -PASS_MIN_LEN 5 -PASS_WARN_AGE 7 - -# -# Min/max values for automatic uid selection in useradd -# -UID_MIN 1000 -UID_MAX 60000 - -# -# Min/max values for automatic gid selection in groupadd -# -GID_MIN 100 -GID_MAX 60000 - -# -# Max number of login retries if password is bad -# -LOGIN_RETRIES 3 - -# -# Max time in seconds for login -# -LOGIN_TIMEOUT 60 - -# -# Require password before chfn/chsh can make any changes. -# -CHFN_AUTH yes - -# -# Which fields may be changed by regular users using chfn - use -# any combination of letters "frwh" (full name, room number, work -# phone, home phone). If not defined, no changes are allowed. -# For backward compatibility, "yes" = "rwh" and "no" = "frwh". -# -CHFN_RESTRICT rwh diff --git a/src/livecd/profiles/aa/aux-files/md b/src/livecd/profiles/aa/aux-files/md deleted file mode 100644 index f90709b631..0000000000 --- a/src/livecd/profiles/aa/aux-files/md +++ /dev/null @@ -1,57 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/aa/aux-files/Attic/md,v 1.1 2003/10/19 03:10:50 livewire Exp $ - -HILITE="\033[1m" -NORMAL="\033[0m" - -RAID="no" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "noraid" ] - then - RAID="no" - fi -done - -depend() { - after checkfs - after * -} - -blurb() { - echo -ne ${HILITE}${1} - #blurblen=${#1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} -start() { - ebegin "Raid Setup" - -if [ "$RAID" = "yes" ] - then - ebegin "Auto-detecting EVMS modules" - # Disable kernel messages to console: - echo "0" > /proc/sys/kernel/printk - local x - for x in /lib/modules/*/kernel/drivers/evms/* - do - y=${x##*/} - y=${y%%.*} - echo -ne " ${GOOD}*${NORMAL} Scanning for ${y}..." - insmod -f ${x} > /dev/null 2>&1 - backup - done - fi - -} - -stop() { - return -} - -# vim:ts=4 diff --git a/src/livecd/profiles/aa/aux-files/memtest b/src/livecd/profiles/aa/aux-files/memtest Binary files differdeleted file mode 100644 index c8cfeb44a4..0000000000 --- a/src/livecd/profiles/aa/aux-files/memtest +++ /dev/null diff --git a/src/livecd/profiles/aa/aux-files/menu.blackbox b/src/livecd/profiles/aa/aux-files/menu.blackbox deleted file mode 100644 index 5d473bbf00..0000000000 --- a/src/livecd/profiles/aa/aux-files/menu.blackbox +++ /dev/null @@ -1,32 +0,0 @@ -[begin] (Gentoo) - [exec] (Americas Army) {cd /opt/armyops170/System;./armyops-bin} - [exec] (Gamelaunch) {gamelaunch} - [exec] (Mozilla) {mozilla} - [exec] (Volume) {aumix} - - -[submenu] (Setup Network) - [exec] (net-setup eth0) {xterm -e "net-setup eth0"} - [exec] (net-setup eth1) {xterm -e "net-setup eth1"} - -[end] - -[submenu] (Terminals) - [exec] (xterm) {xterm -fg white -bg black} -[end] - -[submenu] (Settings) - [workspaces] (Workspace List) -[submenu] (Styles) {Choose a style...} - [stylesdir] (/usr/share/commonbox/styles) -[end] - - [include] (/usr/share/commonbox/imagebgmenu) - [include] (/usr/share/commonbox/solidbgmenu) - [config] (Configure) - [reconfig] (Reload config) -[end] - - [restart] (Restart) -[end] - diff --git a/src/livecd/profiles/aa/aux-files/mingetty b/src/livecd/profiles/aa/aux-files/mingetty Binary files differdeleted file mode 100644 index aaa47dc976..0000000000 --- a/src/livecd/profiles/aa/aux-files/mingetty +++ /dev/null diff --git a/src/livecd/profiles/aa/aux-files/modules b/src/livecd/profiles/aa/aux-files/modules deleted file mode 100644 index 9cfa29400c..0000000000 --- a/src/livecd/profiles/aa/aux-files/modules +++ /dev/null @@ -1,26 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/aa/aux-files/Attic/modules,v 1.1 2003/10/19 03:10:50 livewire Exp $ - - -depend() { - need bootmisc localmount -} - -start() { - # Loop over every line in /etc/modules.autoload. - (cat /etc/modules.autoload; echo) | # make sure there is a LF at the end - while read module args - do - case "${module}" in - \#*|"") continue ;; - esac - ebegin " Loading module ${module}" - modprobe ${module} ${args} &>/dev/null - eend $? " Failed to load ${module}" -done -} - - -# vim:ts=4 diff --git a/src/livecd/profiles/aa/aux-files/motd b/src/livecd/profiles/aa/aux-files/motd deleted file mode 100644 index 949f3d2b55..0000000000 --- a/src/livecd/profiles/aa/aux-files/motd +++ /dev/null @@ -1,4 +0,0 @@ -Welcome to the Gentoo Linux LiveCD! -Build: 30 Apr 2003, i686 optimizations - -type "x-setup" to (re)start America's Army. diff --git a/src/livecd/profiles/aa/aux-files/net b/src/livecd/profiles/aa/aux-files/net deleted file mode 100644 index 6101b9881d..0000000000 --- a/src/livecd/profiles/aa/aux-files/net +++ /dev/null @@ -1,35 +0,0 @@ -# /etc/conf.d/net: -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/aa/aux-files/Attic/net,v 1.1 2003/10/19 03:10:50 livewire Exp $ - -# Global config file for net.* rc-scripts - -# This is basically the ifconfig argument without the ifconfig $iface -# -#iface_eth0="192.168.0.2 broadcast 192.168.0.255 netmask 255.255.255.0" -#iface_eth1="207.170.82.202 broadcast 207.0.255.255 netmask 255.255.0.0" - -# For DHCP set iface_eth? to "dhcp" -# For passing options to dhcpcd use dhcpcd_eth? -# -iface_eth0="dhcp" -iface_eth1="dhcp" -#dhcpcd_eth0="..." - -# For adding aliases to a interface -# -#alias_eth0="192.168.0.3 192.168.0.4" - -# NB: The next is only used for aliases. -# -# To add a custom netmask/broadcast address to created aliases, -# uncomment and change accordingly. Leave commented to assign -# defaults for that interface. -# -#broadcast_eth0="192.168.0.255 192.168.0.255" -#netmask_eth0="255.255.255.0 255.255.255.0" - - -# For setting the default gateway -# -#gateway="eth0/192.168.0.1" - diff --git a/src/livecd/profiles/aa/aux-files/opera.tar.bz2 b/src/livecd/profiles/aa/aux-files/opera.tar.bz2 Binary files differdeleted file mode 100644 index 5ee7d4505c..0000000000 --- a/src/livecd/profiles/aa/aux-files/opera.tar.bz2 +++ /dev/null diff --git a/src/livecd/profiles/aa/aux-files/profile b/src/livecd/profiles/aa/aux-files/profile deleted file mode 100644 index f252b88931..0000000000 --- a/src/livecd/profiles/aa/aux-files/profile +++ /dev/null @@ -1,34 +0,0 @@ -# /etc/profile: -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/aa/aux-files/Attic/profile,v 1.1 2003/10/19 03:10:51 livewire Exp $ - -if [ -e "/etc/profile.env" ] -then - source /etc/profile.env -fi - -#077 would be more secure, but 022 is generally quite realistic -umask 022 -alias cp='cp -i' -alias ls='ls --color' -alias mv='mv -i' -alias pico='nano -w' -alias rm='rm -i' -if [ `/usr/bin/whoami` = 'root' ] -then - if [ "$SHELL" = '/bin/bash' ] || [ "$SHELL" = '/bin/sh' ] - then - export PS1='\[\033[01;31m\]\h \[\033[01;34m\]\W \$ \[\033[00m\]' - fi - export PATH="/bin:/sbin:/usr/bin:/usr/sbin:${ROOTPATH}" -else - if [ "$SHELL" = '/bin/bash' ] || [ "$SHELL" = '/bin/sh' ] - then - export PS1='\[\033[01;32m\]\u@\h \[\033[01;34m\]\W \$ \[\033[00m\]' - fi - export PATH="/bin:/usr/bin:${PATH}" -fi -unset ROOTPATH - -if [ -z "$INPUTRC" -a ! -f "$HOME/.inputrc" ]; then - export INPUTRC="/etc/inputrc" -fi diff --git a/src/livecd/profiles/aa/aux-files/rc b/src/livecd/profiles/aa/aux-files/rc deleted file mode 100644 index 662e4ef310..0000000000 --- a/src/livecd/profiles/aa/aux-files/rc +++ /dev/null @@ -1,521 +0,0 @@ -#!/bin/bash -# Copyright 1999-2003 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/aa/aux-files/Attic/rc,v 1.1 2003/10/19 03:10:51 livewire Exp $ - - -trap ":" INT QUIT TSTP -source /sbin/functions.sh -umask 022 - -try() { - local retval=0 - # This works fine in test, but real life booting, fails for mounting /proc - # if we only check $? for instance ... We thus need to [ -n "${errstr}" ] - # as well. - local errstr - errstr="`(eval $*) 2>&1 >/dev/null`" - retval=$? - if [ "${retval}" -ne 0 ] || \ - ([ -n "`echo "$*" | gawk '/mount/ { print "yes" }'`" -a -n "${errstr}" ]) - then - echo -e "${ENDCOL}${NORMAL}[${BAD} oops ${NORMAL}]" - echo - eerror "The \"${1}\" command failed with error:" - echo - echo "${errstr#*: }" - echo - eerror "Since this is a critical task, startup cannot continue." - echo - /sbin/sulogin ${CONSOLE} - einfo "Unmounting filesystems" - /bin/mount -a -o remount,ro & >/dev/null - einfo "Rebooting" - /sbin/reboot -f - fi - return ${retval} -} - -# Check that $svcdir exists ... -check_statedir() { - if [ ! -d "${svcdir}" ] - then - if ! mkdir -p "${svcdir}" &> /dev/null - then - echo - eerror "For Gentoo Linux to function properly, \"${svcdir}\" need to exist." - eerror "Please mount your root partition read/write, and execute:" - echo - eerror " # mkdir -p ${svcdir}" - echo; echo - /sbin/sulogin ${CONSOLE} - einfo "Unmounting filesystems" - /bin/mount -a -o remount,ro & >/dev/null - einfo "Rebooting" - /sbin/reboot -f - fi - fi -} - -# Save $1 -argv1="$1" -# First time boot stuff goes here. Note that 'sysinit' is an internal runlevel -# used to bring up local filesystems, and should not be started with /sbin/rc -# directly ... -if [ "${RUNLEVEL}" = "S" -a "${argv1}" = "sysinit" ] -then - # Setup initial $PATH just in case - PATH="/bin:/sbin:/usr/bin:/usr/sbin:${PATH}" - - echo - echo -e "${GOOD}Gentoo Linux${GENTOO_VERS}; \e[34;01mhttp://www.gentoo.org/${NORMAL}" - echo -e " Copyright 2001-2003 Gentoo Technologies, Inc.; Distributed under the GPL" - echo - - ebegin "Mounting /proc"; \ - try mount -n /proc; \ - eend $? - - # Figure out the number scripts we are going to start for the progress meter :) - if [ -f /proc/splash ]; then - tscripts=`ls -1R /etc/runlevels/ | grep -c $` - nscripts=`ls -1R /etc/runlevels/ | grep -c '^\B'` - export sscripts=$((${tscripts} - ${nscripts})) - fi - - rc_splash "begin" 2> /dev/null - - if [ "$(get_KV)" -ge "$(KV_to_int '2.5.0')" -a -d /sys ] - then - ebegin "Mounting /sys" - mount -t sysfs none /sys - eend $? - fi - - # Check if the user disabled devfs - devfs="yes" - get_bootparam "nodevfs" - if [ "$?" -eq 0 ] - then - devfs="no" - fi - - # Fix weird bug where there is a /dev/.devfsd in a unmounted /dev - mymounts="`awk '($3 == "devfs") { print "yes"; exit 0 }' /proc/mounts`" - if [ -e "/dev/.devfsd" -a "${mymounts}" != "yes" ] - then - rm -f /dev/.devfsd - fi - - # With the new way, /dev can be mounted by the kernel ... - if [ "${devfs}" = "yes" -a ! -e "/dev/.devfsd" ] - then - mymounts="`awk '($2 == "devfs") { print "yes"; exit 0 }' /proc/filesystems`" - # Is devfs support compiled in? - if [ "${mymounts}" = "yes" ] - then - ebegin "Mounting devfs at /dev"; \ - try mount -n -t devfs none /dev; \ - eend $? - rc_splash "start" - else - clear - echo - einfo "The Gentoo Linux system initialization scripts have detected that your" - einfo "kernel has been compiled without DEVFS support. Because Gentoo Linux" - einfo "has been designed to work with DEVFS, it is required that you compile" - einfo "support for it into your kernel. Please read the 'Gentoo Linux from" - einfo "source (build) CD Installation Guide' at:" - echo - einfo " http://www.gentoo.org/doc/build.html" - echo - einfo "for more information on how to do this." - echo - read -t 15 -p "(hit Enter to continue or wait 15 seconds...)" - fi - fi - - # Need devfsd running now so that /dev/ram0 exists if we need it - mymounts="`awk '($3 == "devfs") { print "yes"; exit 0 }' /proc/mounts`" - if [ "${devfs}" = "yes" -a -e "/dev/.devfsd" -a \ - "${mymounts}" = "yes" ] - then - ebegin "Starting devfsd" - /sbin/devfsd /dev > /dev/null - eend $? - rc_splash "start" - fi - - # Mount either a ramdisk or tmpfs if requested. - # we do this to temp mount, until we can get /var mounted ... - tsvcdir="/mnt/.init.d" - - # Should we use tmpfs or a ramdisk for caching dependency and - # general initscript data? Note that the 'gentoo=tmpfs' kernel - # option should override most settings ... - if get_bootparam "tmpfs" || \ - [ "${svcmount}" = "yes" -a "${svcfstype}" = "tmpfs" ] - then - mkdir -p "${tsvcdir}" - - ebegin "Mounting tmpfs at ${tsvcdir}" - try mount -n -t tmpfs tmpfs "${tsvcdir}" \ - -o rw,mode=0644,size="${svcsize}"k - eend 0 - rc_splash "start" - - elif get_bootparam "ramfs" || \ - [ "${svcmount}" = "yes" -a "${svcfstype}" = "ramfs" ] - then - mkdir -p "${tsvcdir}" - - ebegin "Mounting ramdisk 0 at ${tsvcdir}" - try dd if=/dev/zero of=/dev/ram0 bs=1k count="${svcsize}" - try /sbin/mke2fs -i 1024 -vm0 /dev/ram0 "${svcsize}" - try mount -n -t ext2 /dev/ram0 "${tsvcdir}" -o rw - eend 0 - rc_splash "start" - fi - - if get_bootparam "adelie" - then - einfo "Server/Node low-level initialisation..." - - # Saving the kernel attributed hostname to a file for future - # initialisation selection: see /etc/init.d/switch. - cat /proc/sys/kernel/hostname > "${svcdir}/hostname" - - if checkserver - then - # For server we do pretty much a standard boot ... - einfo "Server detected." - else - # - # Low-level Node Initialisation - # - einfo "Node detected." - - init_node - fi - fi - - # If a Adelie server, or normal Gentoo box, init swap ... - if checkserver - then - # Swap needs to be activated *after* devfs has been mounted and *after* - # devfsd has been started, so that the fstab can be properly parsed - # and only if the server/Gentoo box is initialized ... - ebegin "Activating swap" - /sbin/swapon -a &> /dev/null - eend 0 - rc_splash "start" - fi - - # Set the console loglevel to 1 for a cleaner boot - # the logger should anyhow dump the ring-0 buffer at start to the - # logs, and that with dmesg can be used to check for problems - /bin/dmesg -n 1 - - # $BOOT can be used by rc-scripts to test if it is the first time - # the 'boot' runlevel is executed. Now also needed by some stuff in - # the 'sysinit' runlevel ... - export BOOT="yes" - - # We do not want to break compadibility, so we do not fully integrate - # these into /sbin/rc, but rather start them by hand ... - for x in checkroot hostname modules checkfs localmount - do - source "/etc/init.d/${x}" || error "Failed to source /etc/init.d/${x}" - start || eerror "Failed to start /etc/init.d/${x}" - - if [ "$?" -ne 0 ] - then - echo - eerror "One of more critical startup scripts failed to start!" - eerror "Please correct this, and reboot ..." - echo; echo - /sbin/sulogin ${CONSOLE} - einfo "Unmounting filesystems" - /bin/mount -a -o remount,ro & >/dev/null - einfo "Rebooting" - /sbin/reboot -f - fi - rc_splash "start" - done - - # Check that $svcdir exists ... - check_statedir - - # Since we are using tmpfs or ramfs, just bin to $tsvcdir to $svcdir - if get_bootparam "tmpfs" || get_bootparam "ramfs" || [ "${svcmount}" = "yes" ] - then - mount --bind "${tsvcdir}" "${svcdir}" - fi - - # Clear $svcdir from stale entries - rm -rf "${svcdir}"/* - - # Save our bootsplash variables if needed :) - save_splash_info - - # Update the dependency cache - /sbin/depscan.sh - - # Now that the dependency cache are up to date, make sure these - # are marked as started ... - for x in checkroot hostname modules checkfs localmount - do - ln -snf "/etc/init.d/${x}" "${svcdir}/started/${x}" - done - -fi # Sysinit ends here - -if [ "${RUNLEVEL}" = "S" -a "${argv1}" = "boot" ] -then - # $BOOT can be used by rc-scripts to test if it is the first time - # the 'boot' runlevel is executed - export BOOT="yes" - - # Fix our bootsplash variables - get_splash_info - - rc_splash "start" - -fi - -if [ "${argv1}" = "sysinit" ] -then - exit 0 -fi - -if [ -z "${argv1}" ] -then - if [ -f "${svcdir}/softlevel" ] - then - export SOFTLEVEL="`cat ${svcdir}/softlevel`" - - # Fix our bootsplash variables - get_splash_info - - rc_splash "start" - else - export SOFTLEVEL="boot" - fi -else - export SOFTLEVEL="${argv1}" -fi - -if [ ! -f "${svcdir}/softlevel" ] -then - echo "${SOFTLEVEL}" > "${svcdir}/softlevel" -fi - -# For keeping a list of services that fails during boot/halt -if [ ! -d "${svcdir}/failed" ] -then - install -d -m0755 "${svcdir}/failed" -else - rm -rf "${svcdir}"/failed/* -fi - -if [ "${SOFTLEVEL}" = "reboot" -o "${SOFTLEVEL}" = "shutdown" ] -then - - # Figure out the number scripts we are going to stop for the progress meter :) - if [ -f /proc/splash ]; then - tscripts=`ls -1R ${svcdir}/started | grep -c $` - export cscripts=$((${tscripts} - 1)) - fi - - myscripts="" - - export HALT="${SOFTLEVEL}" - -elif [ ! -d "/etc/runlevels/${SOFTLEVEL}" ] -then - eerror "ERROR: runlevel ${SOFTLEVEL} does not exist; exiting..." - exit 1 -else - myscripts="" - if [ "${SOFTLEVEL}" != "boot" ] - then - # Normal runlevels *include* boot scripts - mylevels="$(dolisting "/etc/runlevels/${SOFTLEVEL}/")" - mylevels="${mylevels} $(dolisting /etc/runlevels/boot/)" - else - # Non-normal runlevels don't include boot scripts as default - mylevels="$(dolisting "/etc/runlevels/${SOFTLEVEL}/")" - fi - for x in ${mylevels} - do - if [ -L "${x}" ] - then - myscripts="${myscripts} ${x##*/}" - fi - done -fi - -# The softscripts dir contains all scripts that belong to the -# runlevel specified in ${svcdir}/softlevel -# It needs to be a new directory, else when stopping the services -# and the old directory is not intact, things get broken - -install -d -m0755 "${svcdir}/softscripts.new" - -for x in ${myscripts} -do - if [ ! -e "/etc/init.d/${x}" ] - then - ewarn "WARNING: /etc/init.d/${x} missing; skipping..." - continue - fi - # The -f eliminates a warning if the symlink already exists, - # which can happen if a service is in both the boot level and - # the current "normal" runlevel - ln -snf "/etc/init.d/${x}" "${svcdir}/softscripts.new/${x}" -done - -dep_stop() { - local x="" - local needsme="" - local myservice="" - local depservice="" - - [ ! -L "$1" ] && continue - if [ ! -e "$1" ] - then - # Remove dud symlinks - rm -f "$1" - continue - fi - myservice="${1##*/}" - - if [ ! -L "${svcdir}/softscripts.new/${myservice}" ] - then - # Candidate for zapping - - # Should not work for 'use' - if [ ! -d "${svcdir}/need/${myservice}" ] - then - # Nothing depends on me - if [ -L "${svcdir}/started/${myservice}" ] - then - "$1" stop - fi - else - # Something may depend on me - needsme=0 - for dep in $(dolisting "${svcdir}/need/${myservice}/") - do - if [ -L "${svcdir}/softscripts.new/${dep##*/}" -a -e "${dep}" ] - then - # This dep is valid - needsme=1 - break - fi - done - if [ "${needsme}" -eq 0 ] - then - if [ -L "${svcdir}/started/${myservice}" ] - then - "$1" stop - fi - fi - fi - fi -} - -# Stop services -for i in $(dolisting "${svcdir}/started/") -do - dep_stop "${i}" -# echo "dep_stop used" -done - -# Only change softlevel AFTER all the services have been stopped, -# else they will not get the depend's right (wrong SOFTLEVEL) - -echo "${SOFTLEVEL}" > "${svcdir}/softlevel" - -if [ "${SOFTLEVEL}" = "reboot" -o "${SOFTLEVEL}" = "shutdown" ] -then - source /sbin/functions.sh - - # Make sure that our $svcdir are clean for next reboot ... - rm -rf "${svcdir}"/* - - source /etc/init.d/halt.sh - - if [ "${SOFTLEVEL}" = "reboot" ] - then - source /etc/init.d/reboot.sh - else - source /etc/init.d/shutdown.sh - fi - # Should never get here - exit 0 -fi - -# Move the old softscritps directory to a different one -# and make the new softscripts directory the current - -mv -f "${svcdir}/softscripts" "${svcdir}/softscripts.old" -mv -f "${svcdir}/softscripts.new" "${svcdir}/softscripts" - -dep_start() { - local x="" - local myservice="" - local depservice="" - - if [ ! -L "$1" ] - then - continue - fi - # Only start a script if it isn't already running - myservice="${1##*/}" - if [ ! -L "${svcdir}/started/${myservice}" ] - then - "$1" start - rc_splash "start" - fi -} - -# Fix our bootsplash variables -get_splash_info - -rc_splash "start" - -# Start scripts -for i in $(dolisting "${svcdir}/softscripts/") -do - dep_start "${i}" - rc_splash "${i} start" -done - -# Clean the old runlevel -rm -rf "${svcdir}/softscripts.old" &> /dev/null - -# Depends gets nuked, so update them -# (this problem should be solved now, but i think it will be a good idea -# to recreate the deps after a change in runlevel) - -#/sbin/depscan.sh &>/dev/null - -# We want devfsd running after a change of runlevel (this is mostly if we return -# from runlevel 'single') -if [ -z "`ps --no-heading -C 'devfsd'`" -a \ - -n "`gawk '/\/dev devfs/ { print }' /proc/mounts 2> /dev/null`" ] -then - /sbin/devfsd /dev &> /dev/null -fi - -# Runlevel end, so clear stale fail list -rm -rf "${svcdir}/failed" &> /dev/null - -# If we were in the boot runlevel, it is done now ... -[ -n "${BOOT}" ] && unset BOOT - -# Save our bootsplash variables if needed :) -save_splash_info - -# vim:ts=4 diff --git a/src/livecd/profiles/aa/aux-files/rc.sbin b/src/livecd/profiles/aa/aux-files/rc.sbin deleted file mode 100644 index f66824009d..0000000000 --- a/src/livecd/profiles/aa/aux-files/rc.sbin +++ /dev/null @@ -1,443 +0,0 @@ -#!/bin/bash -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/aa/aux-files/Attic/rc.sbin,v 1.1 2003/10/19 03:10:51 livewire Exp $ - - -trap ":" INT QUIT TSTP -source /sbin/functions.sh -umask 022 - -try() { - local retval=0 - # this works fine in test, but real life booting, fails for mounting /proc - # for instance, if we only check $?, thus we need to [ -n "${errstr}" ] - # as well - local errstr - errstr="$((eval $*) 2>&1 >/dev/null)" - retval=$? - if [ "${retval}" -ne 0 ] || \ - ([ -n "$(echo $* | egrep 'mount')" -a -n "${errstr}" ]) - then - echo -e "${ENDCOL}${NORMAL}[${BAD} oops ${NORMAL}]" - echo - eerror "The \"${1}\" command failed with error:" - echo - echo "${errstr#*: }" - echo - eerror "Since this is a critical task, startup cannot continue." - echo - /sbin/sulogin ${CONSOLE} - /sbin/reboot -f - fi - return ${retval} -} - -# save $1 -argv1="$1" - -# first time boot stuff goes here -if [ "${RUNLEVEL}" = "S" -a "${argv1}" = "boot" ] -then - # setup initial $PATH just in case - PATH="/bin:/sbin:/usr/bin:/usr/sbin:${PATH}" - - echo -e "${GOOD}Gentoo Linux${GENTOO_VERS}; \e[34;01mhttp://www.gentoo.org/${NORMAL}" - echo -e " Copyright 2001-2002 Gentoo Technologies, Inc.; Distributed under the GPL" - - ebegin "Mounting /proc"; \ - try mount -n /proc; \ - eend $? - - ebegin "Starting metalog" - start-stop-daemon --start --quiet --exec /usr/sbin/metalog \ - -- -p /var/run/metalog.pid --daemonize ${METALOG_OPTS} - eend $? "Failed to start metalog" - - # check if the user disabled devfs - devfs="yes" - get_bootparam "nodevfs" - if [ "$?" -eq 0 ] - then - devfs="no" - fi - - # fix weird bug where there is a /dev/.devfsd in a unmounted /dev - mymounts="$(awk '$3 ~ "devfs" { print $0 }' /proc/mounts)" - if [ -e /dev/.devfsd -a -z "${mymounts}" ] - then - rm -f /dev/.devfsd &>/dev/null - fi - - # with the new way, /dev can be mounted by the kernel ... - if [ "${devfs}" = "yes" -a ! -e /dev/.devfsd ] - then - mymounts="$(awk '$2 ~ "devfs" { print $0 }' /proc/filesystems)" - # is devfs support compiled in? - if [ -n "${mymounts}" ] - then - ebegin "Mounting devfs at /dev"; \ - try mount -n -t devfs none /dev; \ - eend $? - else - clear - echo - einfo "The Gentoo Linux system initialization scripts have detected that your" - einfo "kernel has been compiled without DEVFS support. Because Gentoo Linux" - einfo "has been designed to work with DEVFS, it is required that you compile" - einfo "support for it into your kernel. Please read the 'Gentoo Linux from" - einfo "source (build) CD Installation Guide' at:" - echo - einfo " http://www.gentoo.org/doc/build.html" - echo - einfo "for more information on how to do this." - echo - read -t 15 -p "(hit Enter to continue or wait 15 seconds...)" - fi - fi - - # need devfsd running now so that /dev/ram0 exists if we need it - mymounts="$(cat /proc/mounts)" - if [ "${devfs}" = "yes" -a -e /dev/.devfsd -a \ - "${mymounts/devfs//}" != "${mymounts}" ] - then - ebegin "Starting devfsd" - /sbin/devfsd /dev &>/dev/null - eend $? - fi - - if [ ! -d ${svcdir} ] - then - echo - eerror "For Gentoo Linux to function properly, \"${svcdir}\" need to exist." - eerror "Please mount your root partition read/write, and execute:" - echo - eerror " # mkdir -p ${svcdir}" - echo - echo - /sbin/sulogin ${CONSOLE} - mount -a -o remount,ro &>/dev/null - /sbin/reboot -f - fi - - # mount either a ramdisk or tmpfs and do dep scan - - # should we use tmpfs or a ramdisk ? - if ! get_bootparam "notmpfs" && \ - ([ "${svcfstype}" = "tmpfs" -o "${svcfstype}" != "ramfs" ]) - then - ebegin "Mounting tmpfs at ${svcdir}"; \ - try mount -n -t tmpfs tmpfs ${svcdir} \ - -o rw,mode=0644,size=${svcsize}k; \ - eend 0 - else - ebegin "Mounting ramdisk 0 at ${svcdir}"; \ - try dd if=/dev/zero of=/dev/ram0 bs=1k count=${svcsize}; \ - try /sbin/mke2fs -i 1024 -vm0 /dev/ram0 ${svcsize}; \ - try mount -n -t ext2 /dev/ram0 ${svcdir} -o rw; \ - eend 0 - fi - - if ! get_bootparam "notmpfs" && get_bootparam "ngpt" - then - # POSIX shared memory support - ebegin "Mounting POSIX shared memory" - mkdir -p /dev/shm - try mount -n -t tmpfs tmpfs /dev/shm - eend $? - - # NGPT support (http://www-124.ibm.com/developerworks/oss/pthreads/) - if [ -x /usr/bin/ngptinit ] - then - ebegin "Initializing NGPT" - /usr/bin/ngptinit &> /dev/null || : - eend $? - fi - fi - - /sbin/depscan.sh - - # Saving the kernel attributed hostname to a file for future - # initialisation selection: see /etc/init.d/switch. - get_bootparam "adelie" && cat /proc/sys/kernel/hostname > ${svcdir}/hostname - - get_bootparam "adelie" && einfo "Server/Node low-level initialisation..." - if checkserver - then - get_bootparam "adelie" && einfo "Server detected." - - # swap needs to be activated *after* devfs has been mounted and *after* - # devfsd has been started, so that the fstab can be properly parsed - # and only if the server is initialized - ebegin "Activating swap" - /sbin/swapon -a &>/dev/null - eend 0 - else - # - # Low-level Node Initialisation - # - einfo "Node detected." - ebegin "Importing local userspace on node" - - try mount -t tmpfs none ${shmdir} - - for DIR in /etc /var /root; - do - - if grep -q -v "^${DIR}[[:space:]]" /etc/exports - then - mount -o nolock -n server:${DIR} ${DIR} - fi - - if [ -e /etc/conf.d/exclude/${DIR} ] - then - find ${DIR} -type d | grep -v -f /etc/conf.d/exclude/${DIR} > ${shmdir}/${DIR}.lst - else - find ${DIR} -type d > ${shmdir}/${DIR}.lst - fi - - for SUBDIR in $(cat ${shmdir}/${DIR}.lst); - do - mkdir ${shmdir}/${SUBDIR} - chmod --reference=${SUBDIR} ${shmdir}/${SUBDIR} - cp -dp ${SUBDIR}/* ${shmdir}/${SUBDIR} &>/dev/null - done - - if [ -e /etc/conf.d/exclude/${DIR} ] - then - for EMPTYDIR in $(cat /etc/conf.d/exclude/${DIR}); - do - mkdir ${shmdir}/${EMPTYDIR} - chmod --reference=${SUBDIR} ${shmdir}/${SUBDIR} - done - fi - - umount -n ${DIR} > /dev/null - mount -n -o bind ${shmdir}/${DIR} ${DIR} - done - - mkdir ${shmdir}/tmp - chmod 0777 ${shmdir}/tmp - mount -n -o bind ${shmdir}/tmp /tmp - - cat /proc/mounts > /etc/mtab - - cp -f /etc/inittab.node /etc/inittab - [ -e /etc/fstab.node ] && cp -f /etc/fstab.node /etc/fstab - killall -1 init - - eend 0 - fi - - # set the console loglevel to 1 for a cleaner boot - # the logger should anyhow dump the ring-0 buffer at start to the - # logs, and that with dmesg can be used to check for problems - - /bin/dmesg -n 1 - - # $BOOT can be used by rc-scripts to test if it is the first time - # the 'boot' runlevel is executed - - export BOOT="yes" - -fi # boot ends here - -if [ -z "${argv1}" ] -then - if [ -f ${svcdir}/softlevel ] - then - export SOFTLEVEL="$(cat ${svcdir}/softlevel)" - else - export SOFTLEVEL="boot" - fi -else - export SOFTLEVEL="${argv1}" -fi - -if [ ! -f ${svcdir}/softlevel ] -then - echo "${SOFTLEVEL}" > ${svcdir}/softlevel -fi - -# for keeping a list of services that fails during boot/halt -if [ ! -d ${svcdir}/failed ] -then - install -d -m0755 ${svcdir}/failed -else - rm -rf ${svcdir}/failed/* -fi - -if [ "${SOFTLEVEL}" = "reboot" -o "${SOFTLEVEL}" = "shutdown" ] -then - myscripts="" -elif [ ! -d /etc/runlevels/${SOFTLEVEL} ] -then - eerror "ERROR: runlevel ${SOFTLEVEL} does not exist; exiting..." - exit 1 -else - myscripts="" - if [ "${SOFTLEVEL}" != "boot" ] - then - # normal runlevels *include* boot scripts - mylevels="$(dolisting /etc/runlevels/${SOFTLEVEL}/)" - mylevels="${mylevels} $(dolisting /etc/runlevels/boot/)" - else - # non-normal runlevels don't include boot scripts as default - mylevels="$(dolisting /etc/runlevels/${SOFTLEVEL}/)" - fi - for x in ${mylevels} - do - if [ -L "${x}" ] - then - myscripts="${myscripts} ${x##*/}" - fi - done -fi - -# the softscripts dir contains all scripts that belong to the -# runlevel specified in ${svcdir}/softlevel -# it needs to be a new directory, else when stopping the services -# and the old directory is not intact, things get broken - -install -d -m0755 ${svcdir}/softscripts.new - -for x in ${myscripts} -do - if [ ! -e "/etc/init.d/${x}" ] - then - ewarn "WARNING: /etc/init.d/${x} missing; skipping..." - continue - fi - # the -f eliminates a warning if the symlink already exists, - # which can happen if a service is in both the boot level and - # the current "normal" runlevel - ln -sf /etc/init.d/${x} ${svcdir}/softscripts.new/${x} -done - -dep_stop() { - local x="" - local needsme="" - local myservice="" - local depservice="" - [ ! -L $1 ] && continue - if [ ! -e $1 ] - then - # remove dud symlinks - rm $1 - continue - fi - myservice="${1##*/}" - - if [ ! -L "${svcdir}/softscripts.new/${myservice}" ] - then - # candidate for zapping - - # should not work for 'use' - if [ ! -d "${svcdir}/need/${myservice}" ] - then - # nothing depends on me - if [ -L "${svcdir}/started/${myservice}" ] - then - $1 stop - fi - else - # something may depend on me - needsme=0 - for dep in $(dolisting ${svcdir}/need/${myservice}/) - do - if [ -L "${svcdir}/softscripts.new/${dep##*/}" -a -e ${dep} ] - then - # this dep is valid - needsme=1 - break - fi - done - if [ "${needsme}" -eq 0 ] - then - if [ -L "${svcdir}/started/${myservice}" ] - then - $1 stop - fi - fi - fi - fi -} - -# stop services -for i in $(dolisting ${svcdir}/started/) -do - dep_stop ${i} -done - -# Only change softlevel AFTER all the services have been stopped, -# else they will not get the depend's right (wrong SOFTLEVEL) - -echo "${SOFTLEVEL}" > ${svcdir}/softlevel - -if [ "${SOFTLEVEL}" = "reboot" -o "${SOFTLEVEL}" = "shutdown" ] -then - source /sbin/functions.sh - source /etc/init.d/halt.sh - if [ "${SOFTLEVEL}" = "reboot" ] - then - source /etc/init.d/reboot.sh - else - source /etc/init.d/shutdown.sh - fi - # should never get here - exit 0 -fi - -# move the old softscritps directory to a different one -# and make the new softscripts directory the current - -mv ${svcdir}/softscripts ${svcdir}/softscripts.old &>/dev/null -mv ${svcdir}/softscripts.new ${svcdir}/softscripts &>/dev/null - -dep_start() { - local x="" - local myservice="" - local depservice="" - if [ ! -L $1 ] - then - continue - fi - # only start a script if it isn't already running - myservice="${1##*/}" - if [ ! -L "${svcdir}/started/${myservice}" ] - then - $1 start - fi -} - -# start scripts -for i in $(dolisting ${svcdir}/softscripts/) -do - dep_start ${i} -done - -# clean the old runlevel -rm -rf ${svcdir}/softscripts.old &>/dev/null - -# depends gets nuked, so update them -# (this problem should be solved now, but i think it will be a good idea -# to recreate the deps after a change in runlevel) - -#/sbin/depscan.sh &>/dev/null - -# we want devfsd running after a change of runlevel (this is mostly if we return -# from runlevel 'single') -if [ -z "$(ps -A | egrep 'devfsd')" -a \ - -n "$(cat /proc/mounts | egrep '/dev devfs')" ] -then - /sbin/devfsd /dev &>/dev/null -fi - -# runlevel end, so clear stale fail list -rm -rf ${svcdir}/failed &>/dev/null - -# if we were in the boot runlevel, it is done now ... -[ -n "${BOOT}" ] && unset BOOT - - -# vim:ts=4 diff --git a/src/livecd/profiles/aa/aux-files/resolv.conf b/src/livecd/profiles/aa/aux-files/resolv.conf deleted file mode 100644 index ab1cae14ce..0000000000 --- a/src/livecd/profiles/aa/aux-files/resolv.conf +++ /dev/null @@ -1 +0,0 @@ -nameserver ##NS1## diff --git a/src/livecd/profiles/aa/aux-files/root.tar.bz2 b/src/livecd/profiles/aa/aux-files/root.tar.bz2 Binary files differdeleted file mode 100644 index fd299a54c5..0000000000 --- a/src/livecd/profiles/aa/aux-files/root.tar.bz2 +++ /dev/null diff --git a/src/livecd/profiles/aa/aux-files/splash b/src/livecd/profiles/aa/aux-files/splash deleted file mode 100644 index 56e748a0b4..0000000000 --- a/src/livecd/profiles/aa/aux-files/splash +++ /dev/null @@ -1,71 +0,0 @@ -#!/bin/bash -# -# splash.sh - script to paint progress bar during -# system startup/shutdown. This script is solely run -# by the init scripts (shell function rc_splash) -# -# (w) 2002-2003 Stefan Reinauer, <stepan@suse.de> -# Modified for Gentoo by Jay Pfeifer <pfeifer@gentoo.org> -# It's licensed under GPL, of course. -# -# this script expects the following environment variables: -# sscripts = number of start scripts to be executed for runlevel change -# kscripts = number of stop scripts to be executed for runlevel change -# progress = number of currently executed start/stop script - -# execute splash binary utility because we are a wrapper: -if [ "$1" == "-s" -o "$1" == "-u" -o "$1" == "-n" -o "$1" == "-f" ]; then - exec /sbin/splash.bin $* -else - ( exec /sbin/splash.bin "$*" ) -fi - -# assertions -test -r /proc/splash || exit 0 -sparam=$1 - -# - -function box() { true; } # ignore box descriptions in the config file - -if [ -f /etc/bootsplash/default/config/bootsplash-`fbresolution`.cfg ]; then - . /etc/bootsplash/default/config/bootsplash-`fbresolution`.cfg -fi - -# Print text string.. -if [ "${sparam}" = "begin" ]; then - fbtruetype.static -x ${text_x} -y ${text_y} -t ${text_color} -s ${text_size} \ - "Booting the system... Press F2 for verbose mode" 2> /dev/null - export startnum=$(( ${sscripts} + 5 )) - -fi - -if [ "${sparam}" = "end" ]; then - fbtruetype.static -x ${text_x} -y ${text_y} -t ${text_color} -s ${text_size} \ - "Shutting down the system... Press F2 for verbose mode" 2> /dev/null - export stopnum=$(( ${cscripts} / 4 )) -fi - -# Paint progressbar.. -#if [ "$1" = "start" ]; then -if [ "${#sparam}" -ge "5" ] && \ - [ `expr "${sparam}" : '.*\(.....\)'` = "start" ]; then - export startnum=$(( ${sscripts} + 5 )) - echo "show $(( 65534 * ( ${progress} + 1 ) / ${startnum} ))" > /proc/splash - #echo ${progress} ${sscripts} ${startnum} -# fbtruetype -x ${text_x} -y $((${text_y} + 70)) -t ${text_color} -s ${text_size} \ -# " " 2> /dev/null -# fbtruetype -x ${text_x} -y $((${text_y} + 70)) -t ${text_color} -s ${text_size} \ -# "$1" 2> /dev/null -fi -#if [ "$1" = "stop" ]; then -if [ "${#sparam}" -ge "4" ] && \ - [ `expr "${sparam}" : '.*\(....\)'` = "stop" ]; then - export stopnum=$(( ${cscripts} / 4 )) - echo "show $(( 65534 * ( ${progress} + 1 ) / ${stopnum} ))" > /proc/splash - #echo ${progress} ${sscripts} ${stopnum} -# fbtruetype -x ${text_x} -y $((${text_y} + 70)) -t ${text_color} -s ${text_size} \ -# " " 2> /dev/null -# fbtruetype -x ${text_x} -y $((${text_y} + 70)) -t ${text_color} -s ${text_size} \ -# "$1" 2> /dev/null -fi diff --git a/src/livecd/profiles/aa/aux-files/splash.bin b/src/livecd/profiles/aa/aux-files/splash.bin Binary files differdeleted file mode 100644 index be47b88ee5..0000000000 --- a/src/livecd/profiles/aa/aux-files/splash.bin +++ /dev/null diff --git a/src/livecd/profiles/aa/aux-files/usleep b/src/livecd/profiles/aa/aux-files/usleep Binary files differdeleted file mode 100644 index 4bee8c4bc1..0000000000 --- a/src/livecd/profiles/aa/aux-files/usleep +++ /dev/null diff --git a/src/livecd/profiles/aa/aux-files/xfree-nvidia b/src/livecd/profiles/aa/aux-files/xfree-nvidia deleted file mode 100644 index 384c866ad7..0000000000 --- a/src/livecd/profiles/aa/aux-files/xfree-nvidia +++ /dev/null @@ -1,290 +0,0 @@ -########################################################################## -# Sample XF86Config file for NVIDIA XFree86 drivers. -# -# Refer to the XF86Config(4/5) man page for details about the format of -# this file. -# -# Be sure to replace the monitor values with correct values for your -# monitor! -########################################################################## - - -Section "Files" - - RgbPath "/usr/X11R6/lib/X11/rgb" - FontPath "unix/:-1" - -EndSection - - -########################################################################## -# Server flags section. -########################################################################## - -Section "ServerFlags" - - # Uncomment this to cause a core dump at the spot where a signal is - # received. This may leave the console in an unusable state, but may - # provide a better stack trace in the core dump to aid in debugging - #NoTrapSignals - - # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence - # This allows clients to receive this key event. - #DontZap - - # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching - # sequences. This allows clients to receive these key events. - #DontZoom - - # This allows the server to start up even if the - # mouse device can't be opened/initialised. - AllowMouseOpenFail - -EndSection - - -########################################################################## -# Input devices -########################################################################## - -# -# Keyboard section -# -Section "InputDevice" - - Identifier "Keyboard1" - Driver "Keyboard" - Option "AutoRepeat" "250 30" - - Option "XkbRules" "xfree86" - Option "XkbModel" "pc105" - Option "XkbLayout" "us" - -EndSection - - -# -# Pointer section -# -Section "InputDevice" - - Identifier "Mouse1" - Driver "mouse" - Option "Protocol" "IMPS/2" - Option "Device" "/dev/input/mice" - Option "Buttons" "7" - Option "ZAxisMapping" "4 5" -EndSection - - -########################################################################## -# Module section -########################################################################## - -Section "Module" - - Load "dbe" - - # Load the glx module. - Load "glx" - - Load "extmod" - - Load "type1" - Load "freetype" -EndSection - - -########################################################################## -# Monitor section -########################################################################## - -Section "Monitor" - - Identifier "MyMonitor" - VendorName "Mitsubisi" - ModelName "Diamond Plus 120u" - - # be sure to replace these values with values appropriate for your - # monitor! -# HorizSync 31-82 -# VertRefresh 55-120 - -EndSection - - -########################################################################## -# Graphics device section(s) -########################################################################## - -Section "Device" - Identifier "NV AGP" - VendorName "nvidia" - Driver "nvidia" - # update this with the PCI id of your card. Consult the output - # of the 'lspci' command. -# BusID "PCI:1:0:0" - Option "NoLogo" "1" -# Option "NoDDC" "1" -EndSection - -Section "Device" - Identifier "NV PCI" - VendorName "nvidia" - Driver "nvidia" - # update this with the PCI id of your card. Consult the output - # of the 'lspci' command. - BusID "PCI:0:13:0" -EndSection - -Section "Device" - Identifier "NV AGP TwinView" - VendorName "nvidia" - Driver "nvidia" - # update this with the PCI id of your card. Consult the output - # of the 'lspci' command. - BusID "PCI:1:0:0" - - # sample twinview setup - Option "TwinView" - # be sure to replace the HorizSync and VertRefresh with correct values - # for your monitor! - Option "SecondMonitorHorizSync" "31-82" - Option "SecondMonitorVertRefresh" "55-120" - Option "TwinViewOrientation" "RightOf" - Option "MetaModes" "1280x1024,1280x1024; 1024x768,1024x768" - Option "ConnectedMonitor" "crt,crt" -EndSection - - -########################################################################## -# Screen sections -########################################################################## - -# -# screen section for an nvidia AGP card -# -Section "Screen" - Identifier "Screen AGP" - Device "NV AGP" - Monitor "MyMonitor" - DefaultColorDepth 24 - DefaultFbBpp 32 - Subsection "Display" - Depth 8 - Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x400" - EndSubsection - Subsection "Display" - Depth 16 - Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - Subsection "Display" - Depth 24 - Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - -EndSection - - -# -# screen section for an nvidia PCI card -# -Section "Screen" - Identifier "Screen PCI" - Device "NV PCI" - Monitor "MyMonitor" - DefaultColorDepth 24 - Subsection "Display" - Depth 8 - Modes "1280x1024" "1024x768" "800x600" "640x400" - EndSubsection - Subsection "Display" - Depth 16 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - Subsection "Display" - Depth 24 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection -EndSection - -# -# screen section for an nvidia AGP TwinView card -# (look at the appropriate Device section) -# -Section "Screen" - Identifier "Screen AGP TwinView" - Device "NV AGP TwinView" - Monitor "MyMonitor" - DefaultColorDepth 24 - Subsection "Display" - Depth 8 - Modes "1280x1024" "1024x768" "800x600" "640x400" - EndSubsection - Subsection "Display" - Depth 16 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - Subsection "Display" - Depth 24 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection -EndSection - - -########################################################################## -# ServerLayout sections -# (invoke using the '-layout' option of 'startx'. -########################################################################## - -# -# just one agp card -# -Section "ServerLayout" - Identifier "AGP" - Screen "Screen AGP" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# just one pci card -# -Section "ServerLayout" - Identifier "PCI" - Screen "Screen PCI" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# 2 cards, non twinview -# -Section "ServerLayout" - Identifier "Both" - Screen "Screen AGP" - Screen "Screen PCI" LeftOf "Screen AGP" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# just one agp twinview card -# -Section "ServerLayout" - Identifier "AGPTwinView" - Screen "Screen AGP TwinView" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# 2 cards, one agp twinview and one pci (3 monitors total) -# -Section "ServerLayout" - Identifier "BothTwinView" - Screen "Screen AGP TwinView" - Screen "Screen PCI" LeftOf "Screen AGP TwinView" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection diff --git a/src/livecd/profiles/aa/bash_profile b/src/livecd/profiles/aa/bash_profile deleted file mode 100644 index cd8b190774..0000000000 --- a/src/livecd/profiles/aa/bash_profile +++ /dev/null @@ -1,6 +0,0 @@ -#!/bin/bash -if [ -e /etc/startgame ] - then - rm -f /etc/startgame - /usr/sbin/x-setup -fi diff --git a/src/livecd/profiles/aa/boot.msg b/src/livecd/profiles/aa/boot.msg deleted file mode 100644 index dba36228ba..0000000000 --- a/src/livecd/profiles/aa/boot.msg +++ /dev/null @@ -1,4 +0,0 @@ -17 gentoo.lss - -Gentoo Linux 1.4 http://www.gentoo.org/ RELEASE: 1.4-Release -Enter to boot; F2 for options. diff --git a/src/livecd/profiles/aa/boot1.msg b/src/livecd/profiles/aa/boot1.msg deleted file mode 100644 index f81f7531f7..0000000000 --- a/src/livecd/profiles/aa/boot1.msg +++ /dev/null @@ -1,24 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - -Welcome .... - -Hold shift key while booting for options menu , Then press F2 for help diff --git a/src/livecd/profiles/aa/ck-config b/src/livecd/profiles/aa/ck-config deleted file mode 100644 index 407f35260d..0000000000 --- a/src/livecd/profiles/aa/ck-config +++ /dev/null @@ -1,1233 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_LOLAT=y -# CONFIG_LOLAT_SYSCTL is not set -# CONFIG_M386 is not set -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M686 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -CONFIG_MK7=y -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -CONFIG_X86_WP_WORKS_OK=y -CONFIG_X86_INVLPG=y -CONFIG_X86_CMPXCHG=y -CONFIG_X86_XADD=y -CONFIG_X86_BSWAP=y -CONFIG_X86_POPAD_OK=y -# CONFIG_RWSEM_GENERIC_SPINLOCK is not set -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_X86_L1_CACHE_SHIFT=6 -CONFIG_X86_HAS_TSC=y -CONFIG_X86_GOOD_APIC=y -CONFIG_X86_USE_3DNOW=y -CONFIG_X86_PGE=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_F00F_WORKS_OK=y -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -CONFIG_PREEMPT=y -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set -CONFIG_X86_TSC=y -CONFIG_HAVE_DEC_LOCK=y - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -CONFIG_CARDBUS=y -CONFIG_TCIC=y -CONFIG_I82092=y -CONFIG_I82365=y - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -# CONFIG_CISS_SCSI_TAPE is not set -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -# CONFIG_CDROM_PKTCDVD is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -# CONFIG_BLK_DEV_IDESCSI is not set -CONFIG_IDE_TASK_IOCTL=y -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_CMD680 is not set -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -# CONFIG_PDC202XX_BURST is not set -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -# CONFIG_SCSI is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_BOOT is not set -# CONFIG_FUSION_ISENSE is not set -# CONFIG_FUSION_CTL is not set -# CONFIG_FUSION_LAN is not set - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -# CONFIG_IEEE1394_SBP2 is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -CONFIG_PCMCIA_IBMTR=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_AIRONET4500_CS=m - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=m - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -CONFIG_AGP_INTEL=y -CONFIG_AGP_I810=y -CONFIG_AGP_VIA=y -CONFIG_AGP_AMD=y -CONFIG_AGP_AMD_8151=y -CONFIG_AGP_SIS=y -CONFIG_AGP_ALI=y -CONFIG_AGP_SWORKS=y -CONFIG_DRM=y -# CONFIG_DRM_OLD is not set -CONFIG_DRM_NEW=y -CONFIG_DRM_TDFX=m -CONFIG_DRM_R128=m -CONFIG_DRM_RADEON=m -CONFIG_DRM_I810=m -CONFIG_DRM_I810_XFREE_41=y -CONFIG_DRM_I830=m -CONFIG_DRM_MGA=m -CONFIG_DRM_SIS=m - -# -# PCMCIA character devices -# -CONFIG_PCMCIA_SERIAL_CS=m -CONFIG_SYNCLINK_CS=m -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_SUPERMOUNT is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_DMAPI is not set -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_SOUND_ALI5455=m -CONFIG_SOUND_BT878=m -CONFIG_SOUND_CMPCI=m -# CONFIG_SOUND_CMPCI_FM is not set -# CONFIG_SOUND_CMPCI_MIDI is not set -# CONFIG_SOUND_CMPCI_JOYSTICK is not set -# CONFIG_SOUND_CMPCI_CM8738 is not set -CONFIG_SOUND_EMU10K1=m -# CONFIG_MIDI_EMU10K1 is not set -CONFIG_SOUND_FUSION=m -CONFIG_SOUND_CS4281=m -CONFIG_SOUND_ES1370=m -CONFIG_SOUND_ES1371=m -CONFIG_SOUND_ESSSOLO1=m -CONFIG_SOUND_MAESTRO=m -CONFIG_SOUND_MAESTRO3=m -CONFIG_SOUND_FORTE=m -CONFIG_SOUND_ICH=m -CONFIG_SOUND_RME96XX=m -CONFIG_SOUND_SONICVIBES=m -CONFIG_SOUND_TRIDENT=m -CONFIG_SOUND_MSNDCLAS=m -# CONFIG_MSNDCLAS_HAVE_BOOT is not set -CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin" -CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin" -CONFIG_SOUND_MSNDPIN=m -# CONFIG_MSNDPIN_HAVE_BOOT is not set -CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin" -CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin" -CONFIG_SOUND_VIA82CXXX=m -# CONFIG_MIDI_VIA82CXXX is not set -CONFIG_SOUND_OSS=m -# CONFIG_SOUND_TRACEINIT is not set -# CONFIG_SOUND_DMAP is not set -CONFIG_SOUND_AD1816=m -CONFIG_SOUND_SGALAXY=m -CONFIG_SOUND_ADLIB=m -CONFIG_SOUND_ACI_MIXER=m -CONFIG_SOUND_CS4232=m -CONFIG_SOUND_SSCAPE=m -CONFIG_SOUND_GUS=m -# CONFIG_SOUND_GUS16 is not set -# CONFIG_SOUND_GUSMAX is not set -CONFIG_SOUND_VMIDI=m -CONFIG_SOUND_TRIX=m -CONFIG_SOUND_MSS=m -CONFIG_SOUND_MPU401=m -CONFIG_SOUND_NM256=m -CONFIG_SOUND_MAD16=m -# CONFIG_MAD16_OLDCARD is not set -CONFIG_SOUND_PAS=m -# CONFIG_PAS_JOYSTICK is not set -CONFIG_SOUND_PSS=m -# CONFIG_PSS_MIXER is not set -# CONFIG_PSS_HAVE_BOOT is not set -CONFIG_SOUND_SB=m -CONFIG_SOUND_AWE32_SYNTH=m -CONFIG_SOUND_WAVEFRONT=m -CONFIG_SOUND_MAUI=m -CONFIG_SOUND_YM3812=m -CONFIG_SOUND_OPL3SA1=m -CONFIG_SOUND_OPL3SA2=m -CONFIG_SOUND_YMFPCI=m -# CONFIG_SOUND_YMFPCI_LEGACY is not set -CONFIG_SOUND_UART6850=m -CONFIG_SOUND_AEDSP16=m -# CONFIG_SC6600 is not set -# CONFIG_AEDSP16_SBPRO is not set -# CONFIG_AEDSP16_MSS is not set -# CONFIG_AEDSP16_MPU401 is not set -# CONFIG_SOUND_TVMIXER is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_UHCI=y -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=y -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -CONFIG_USB_HIDDEV=y -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -# CONFIG_USB_LCD is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/aa/clean b/src/livecd/profiles/aa/clean deleted file mode 100644 index 6a77a6f0c5..0000000000 --- a/src/livecd/profiles/aa/clean +++ /dev/null @@ -1,55 +0,0 @@ -#!/bin/bash -if [ -z "$CD_BUILDCHROOT" ] -then - echo "Error: \$CD_BUILDCHROOT not defined." - exit 1 -fi - -#keep important C/C++/Java shared libraries -touch ${CD_BUILDCHROOT}/usr/lib/gcc-lib/*/*/*.so* -touch ${CD_BUILDCHROOT}/usr/lib/libstdc++* -touch ${CD_BUILDCHROOT}/etc/env.d/??gcc* - -mount_all -#remove extra build-related packages -chroot ${CD_BUILDCHROOT} /bin/bash -e <<EOF -source /etc/profile -emerge -C autoconf automake bin86 binutils libtool m4 bison ld.so make perl patch linux-headers man-pages || exit 1 -emerge -C sash bison flex gettext texinfo ccache addpatches man groff lib-compat gcc python miscfiles ucl || exit 1 -EOF -#detect chroot errors: -[ $? -ne 0 ] && chroot_die "problems cleaning packages" -umount_all - -#final cleanups -for x in /var/tmp/portage /var/db /var/empty /var/cache \ -/var/lock /tmp /usr/portage /usr/share/man /usr/share/info /usr/share/unimaps \ -/usr/include /usr/share/zoneinfo /usr/share/dict /usr/share/doc /usr/share/ss /usr/share/state /usr/share/texinfo \ -/var/tmp /usr/lib/python2.2 /usr/lib/portage /usr/share/gettext /usr/share/i18n /usr/share/rfc \ -/usr/X11R6/man /usr/X11R6/include /usr/X11R6/lib/X11/config /usr/X11R6/lib/X11/etc /usr/X11R6/lib/X11/doc -do - rm -rf ${CD_BUILDCHROOT}/${x}/* ${CD_BUILDCHROOT}/${x}/.* -done -#rm -rf ${CD_BUILDCHROOT}/usr/share/keymaps - -for x in /sbin/insmod.static /sbin/sln \ -/usr/X11R6/bin/Xnest \ -/usr/X11R6/bin/Xprt \ -/usr/X11R6/bin/Xvfb -do - rm ${CD_BUILDCHROOT}/${x} -done - -#clean up the kernel source tree... -rm -rf ${CD_BUILDCHROOT}/usr/src/linux* -rm -rf ${CD_BUILDCHROOT}/var/db/pkg/sys-kernel/* -rm -rf ${CD_BUILDCHROOT}/usr/lib/gcc-lib/*/*/libgcj* -rm -rf ${CD_BUILDCHROOT}/usr/lib/*.a -rm -rf ${CD_BUILDCHROOT}/lib/*.a -rm -rf ${CD_BUILDCHROOT}/usr/X11R6/lib/*.a -#remove entire directory trees (argument 1) *except* for these files/dir trees (arguments 2+) -zapmost /usr/share/terminfo l/linux v/vt100 v/vt102 n/nxterm x/xterm x/xterm-color -zapmost /usr/share/locale C en_US -zapmost /usr/X11R6/lib/X11/locale iso8859-1 iso8859-15 common en_US.UTF-8 -[ -e ${CD_BUILDCHROOT}/usr/lib/locale ] && zapmost /usr/lib/locale en_US -zapmost /usr/share/misc magic pci.ids diff --git a/src/livecd/profiles/aa/gaming-config b/src/livecd/profiles/aa/gaming-config deleted file mode 100644 index da32fb4475..0000000000 --- a/src/livecd/profiles/aa/gaming-config +++ /dev/null @@ -1,1243 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_LOLAT=y -# CONFIG_LOLAT_SYSCTL is not set -# CONFIG_M386 is not set -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -CONFIG_M68631=y -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -CONFIG_X86_WP_WORKS_OK=y -CONFIG_X86_INVLPG=y -CONFIG_X86_CMPXCHG=y -CONFIG_X86_XADD=y -CONFIG_X86_BSWAP=y -CONFIG_X86_POPAD_OK=y -# CONFIG_RWSEM_GENERIC_SPINLOCK is not set -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_X86_L1_CACHE_SHIFT=5 -CONFIG_X86_HAS_TSC=y -CONFIG_X86_GOOD_APIC=y -CONFIG_X86_PGE=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -CONFIG_PREEMPT=y -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set -CONFIG_X86_TSC=y -CONFIG_HAVE_DEC_LOCK=y - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -CONFIG_CARDBUS=y -CONFIG_TCIC=y -CONFIG_I82092=y -CONFIG_I82365=y - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -# CONFIG_CISS_SCSI_TAPE is not set -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -# CONFIG_CDROM_PKTCDVD is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -# CONFIG_BLK_DEV_IDESCSI is not set -CONFIG_IDE_TASK_IOCTL=y -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_CMD680 is not set -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -# CONFIG_PDC202XX_BURST is not set -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -# CONFIG_SCSI is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_BOOT is not set -# CONFIG_FUSION_ISENSE is not set -# CONFIG_FUSION_CTL is not set -# CONFIG_FUSION_LAN is not set - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -# CONFIG_IEEE1394_SBP2 is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -CONFIG_PCMCIA_IBMTR=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_AIRONET4500_CS=m - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -CONFIG_INPUT_EVDEV=y - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -CONFIG_AGP_INTEL=y -CONFIG_AGP_I810=y -CONFIG_AGP_VIA=y -CONFIG_AGP_AMD=y -CONFIG_AGP_AMD_8151=y -CONFIG_AGP_SIS=y -CONFIG_AGP_ALI=y -CONFIG_AGP_SWORKS=y -CONFIG_DRM=y -# CONFIG_DRM_OLD is not set -CONFIG_DRM_NEW=y -CONFIG_DRM_TDFX=m -CONFIG_DRM_R128=m -CONFIG_DRM_RADEON=m -CONFIG_DRM_I810=m -CONFIG_DRM_I810_XFREE_41=y -CONFIG_DRM_I830=m -CONFIG_DRM_MGA=m -CONFIG_DRM_SIS=m - -# -# PCMCIA character devices -# -CONFIG_PCMCIA_SERIAL_CS=m -CONFIG_SYNCLINK_CS=m -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_SUPERMOUNT is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_DMAPI is not set -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_SOUND_ALI5455=m -# CONFIG_SOUND_BT878 is not set -CONFIG_SOUND_CMPCI=m -# CONFIG_SOUND_CMPCI_FM is not set -# CONFIG_SOUND_CMPCI_MIDI is not set -# CONFIG_SOUND_CMPCI_JOYSTICK is not set -# CONFIG_SOUND_CMPCI_CM8738 is not set -CONFIG_SOUND_EMU10K1=m -# CONFIG_MIDI_EMU10K1 is not set -CONFIG_SOUND_FUSION=m -CONFIG_SOUND_CS4281=m -CONFIG_SOUND_ES1370=m -CONFIG_SOUND_ES1371=m -CONFIG_SOUND_ESSSOLO1=m -CONFIG_SOUND_MAESTRO=m -CONFIG_SOUND_MAESTRO3=m -CONFIG_SOUND_FORTE=m -CONFIG_SOUND_ICH=m -CONFIG_SOUND_RME96XX=m -CONFIG_SOUND_SONICVIBES=m -CONFIG_SOUND_TRIDENT=m -CONFIG_SOUND_MSNDCLAS=m -# CONFIG_MSNDCLAS_HAVE_BOOT is not set -CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin" -CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin" -CONFIG_SOUND_MSNDPIN=m -# CONFIG_MSNDPIN_HAVE_BOOT is not set -CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin" -CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin" -CONFIG_SOUND_VIA82CXXX=m -# CONFIG_MIDI_VIA82CXXX is not set -CONFIG_SOUND_OSS=m -# CONFIG_SOUND_TRACEINIT is not set -# CONFIG_SOUND_DMAP is not set -CONFIG_SOUND_AD1816=m -CONFIG_SOUND_SGALAXY=m -CONFIG_SOUND_ADLIB=m -CONFIG_SOUND_ACI_MIXER=m -CONFIG_SOUND_CS4232=m -CONFIG_SOUND_SSCAPE=m -CONFIG_SOUND_GUS=m -# CONFIG_SOUND_GUS16 is not set -# CONFIG_SOUND_GUSMAX is not set -CONFIG_SOUND_VMIDI=m -CONFIG_SOUND_TRIX=m -CONFIG_SOUND_MSS=m -CONFIG_SOUND_MPU401=m -CONFIG_SOUND_NM256=m -CONFIG_SOUND_MAD16=m -# CONFIG_MAD16_OLDCARD is not set -CONFIG_SOUND_PAS=m -# CONFIG_PAS_JOYSTICK is not set -CONFIG_SOUND_PSS=m -# CONFIG_PSS_MIXER is not set -# CONFIG_PSS_HAVE_BOOT is not set -CONFIG_SOUND_SB=m -CONFIG_SOUND_AWE32_SYNTH=m -CONFIG_SOUND_WAVEFRONT=m -CONFIG_SOUND_MAUI=m -CONFIG_SOUND_YM3812=m -CONFIG_SOUND_OPL3SA1=m -CONFIG_SOUND_OPL3SA2=m -CONFIG_SOUND_YMFPCI=m -# CONFIG_SOUND_YMFPCI_LEGACY is not set -CONFIG_SOUND_UART6850=m -CONFIG_SOUND_AEDSP16=m -# CONFIG_SC6600 is not set -# CONFIG_AEDSP16_SBPRO is not set -# CONFIG_AEDSP16_MSS is not set -# CONFIG_AEDSP16_MPU401 is not set -# CONFIG_SOUND_TVMIXER is not set - -# -# USB support -# -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=m -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=m -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -CONFIG_USB_HIDDEV=y -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -# CONFIG_USB_LCD is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/aa/gaming-config2 b/src/livecd/profiles/aa/gaming-config2 deleted file mode 100644 index 6e54131e6e..0000000000 --- a/src/livecd/profiles/aa/gaming-config2 +++ /dev/null @@ -1,1309 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_LOLAT=y -# CONFIG_LOLAT_SYSCTL is not set -# CONFIG_M386 is not set -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -# CONFIG_M68631 is not set -CONFIG_MPENTIUMIII=y -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -CONFIG_X86_WP_WORKS_OK=y -CONFIG_X86_INVLPG=y -CONFIG_X86_CMPXCHG=y -CONFIG_X86_XADD=y -CONFIG_X86_BSWAP=y -CONFIG_X86_POPAD_OK=y -# CONFIG_RWSEM_GENERIC_SPINLOCK is not set -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_X86_L1_CACHE_SHIFT=5 -CONFIG_X86_HAS_TSC=y -CONFIG_X86_GOOD_APIC=y -CONFIG_X86_PGE=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_F00F_WORKS_OK=y -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -CONFIG_SMP=y -CONFIG_PREEMPT=y -# CONFIG_MULTIQUAD is not set -# CONFIG_X86_TSC_DISABLE is not set -CONFIG_X86_TSC=y -CONFIG_HAVE_DEC_LOCK=y - -# -# General setup -# -CONFIG_NET=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -# CONFIG_PCMCIA is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_IBM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -# CONFIG_ACPI_HT_ONLY is not set -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -# CONFIG_CDROM_PKTCDVD is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -# CONFIG_NETFILTER is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_IPV6=y -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_CMD680 is not set -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -# CONFIG_PDC202XX_BURST is not set -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -# CONFIG_SCSI_SYM53C8XX is not set -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -CONFIG_EQUALIZER=y -CONFIG_TUN=m -CONFIG_ETHERTAP=y -CONFIG_NET_SB1000=m - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -CONFIG_FDDI=y -CONFIG_DEFXX=m -CONFIG_SKFP=m -CONFIG_HIPPI=y -CONFIG_ROADRUNNER=m -# CONFIG_ROADRUNNER_LARGE_RINGS is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_STRIP is not set -# CONFIG_WAVELAN is not set -# CONFIG_ARLAN is not set -# CONFIG_AIRONET4500 is not set -# CONFIG_AIRONET4500_NONCS is not set -# CONFIG_AIRONET4500_PROC is not set -# CONFIG_AIRO is not set -# CONFIG_HERMES is not set -# CONFIG_PLX_HERMES is not set -# CONFIG_PCI_HERMES is not set -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_IRDA_DEBUG=y - -# -# Infrared-port device drivers -# -CONFIG_IRTTY_SIR=m -CONFIG_IRPORT_SIR=m -CONFIG_DONGLE=y -CONFIG_ESI_DONGLE=m -CONFIG_ACTISYS_DONGLE=m -CONFIG_TEKRAM_DONGLE=m -CONFIG_GIRBIL_DONGLE=m -CONFIG_LITELINK_DONGLE=m -CONFIG_MCP2120_DONGLE=m -CONFIG_OLD_BELKIN_DONGLE=m -CONFIG_ACT200L_DONGLE=m -CONFIG_MA600_DONGLE=m -CONFIG_USB_IRDA=m -CONFIG_NSC_FIR=m -CONFIG_WINBOND_FIR=m -CONFIG_TOSHIBA_FIR=m -CONFIG_SMC_IRCC_FIR=m -CONFIG_ALI_FIR=m -CONFIG_VLSI_FIR=m - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -CONFIG_ISDN_DRV_LOOP=m -CONFIG_ISDN_DIVERSION=m - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -CONFIG_AGP_INTEL=y -CONFIG_AGP_I810=y -CONFIG_AGP_VIA=y -CONFIG_AGP_AMD=y -# CONFIG_AGP_AMD_8151 is not set -CONFIG_AGP_SIS=y -CONFIG_AGP_ALI=y -# CONFIG_AGP_SWORKS is not set -# CONFIG_DRM is not set -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_SUPERMOUNT is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -CONFIG_XFS_QUOTA=y -CONFIG_XFS_DMAPI=y -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -# CONFIG_ZISOFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -CONFIG_VIDEO_SELECT=y -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -CONFIG_FB=y -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FB_LOGO_TUX is not set -# CONFIG_FB_LOGO_LARRY is not set -# CONFIG_FB_LOGO_GENTOO is not set -# CONFIG_FB_LOGO_G is not set -# CONFIG_FB_LOGO_PENGUIN is not set -CONFIG_FB_LOGO_POWEREDBY=y -# CONFIG_FB_RIVA is not set -# CONFIG_FB_CLGEN is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_VESA=y -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_HGA is not set -CONFIG_VIDEO_SELECT=y -# CONFIG_LPP is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -CONFIG_FB_VMWARE_SVGA=y -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_FBCON_SPLASHSCREEN=y -CONFIG_FBCON_CFB16=y -# CONFIG_FBCON_ADVANCED is not set -CONFIG_FBCON_CFB8=y -CONFIG_FBCON_CFB16=y -CONFIG_FBCON_CFB24=y -CONFIG_FBCON_CFB32=y -# CONFIG_FBCON_FONTWIDTH8_ONLY is not set -# CONFIG_FBCON_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_SOUND_ALI5455=m -CONFIG_SOUND_BT878=m -CONFIG_SOUND_CMPCI=m -# CONFIG_SOUND_CMPCI_FM is not set -# CONFIG_SOUND_CMPCI_MIDI is not set -# CONFIG_SOUND_CMPCI_JOYSTICK is not set -# CONFIG_SOUND_CMPCI_CM8738 is not set -CONFIG_SOUND_EMU10K1=m -# CONFIG_MIDI_EMU10K1 is not set -CONFIG_SOUND_FUSION=m -CONFIG_SOUND_CS4281=m -CONFIG_SOUND_ES1370=m -CONFIG_SOUND_ES1371=m -CONFIG_SOUND_ESSSOLO1=m -CONFIG_SOUND_MAESTRO=m -CONFIG_SOUND_MAESTRO3=m -CONFIG_SOUND_FORTE=m -CONFIG_SOUND_ICH=m -CONFIG_SOUND_RME96XX=m -CONFIG_SOUND_SONICVIBES=m -CONFIG_SOUND_TRIDENT=m -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -CONFIG_SOUND_VIA82CXXX=m -# CONFIG_MIDI_VIA82CXXX is not set -CONFIG_SOUND_OSS=m -# CONFIG_SOUND_TRACEINIT is not set -# CONFIG_SOUND_DMAP is not set -CONFIG_SOUND_AD1816=m -CONFIG_SOUND_SGALAXY=m -CONFIG_SOUND_ADLIB=m -CONFIG_SOUND_ACI_MIXER=m -CONFIG_SOUND_CS4232=m -CONFIG_SOUND_SSCAPE=m -CONFIG_SOUND_GUS=m -# CONFIG_SOUND_GUS16 is not set -# CONFIG_SOUND_GUSMAX is not set -# CONFIG_SOUND_VMIDI is not set -CONFIG_SOUND_TRIX=m -CONFIG_SOUND_MSS=m -# CONFIG_SOUND_MPU401 is not set -CONFIG_SOUND_NM256=m -CONFIG_SOUND_MAD16=m -# CONFIG_MAD16_OLDCARD is not set -CONFIG_SOUND_PAS=m -# CONFIG_PAS_JOYSTICK is not set -CONFIG_SOUND_PSS=m -# CONFIG_PSS_MIXER is not set -# CONFIG_PSS_HAVE_BOOT is not set -CONFIG_SOUND_SB=m -# CONFIG_SOUND_AWE32_SYNTH is not set -# CONFIG_SOUND_WAVEFRONT is not set -# CONFIG_SOUND_MAUI is not set -CONFIG_SOUND_YM3812=m -CONFIG_SOUND_OPL3SA1=m -CONFIG_SOUND_OPL3SA2=m -CONFIG_SOUND_YMFPCI=m -# CONFIG_SOUND_YMFPCI_LEGACY is not set -CONFIG_SOUND_UART6850=m -# CONFIG_SOUND_AEDSP16 is not set -# CONFIG_SOUND_TVMIXER is not set - -# -# USB support -# -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=m -CONFIG_USB_UHCI_ALT=m -CONFIG_USB_OHCI=m -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -CONFIG_USB_BLUETOOTH=m -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_TIGL=m -CONFIG_USB_BRLVGER=m -CONFIG_USB_LCD=m - -# -# Bluetooth support -# -CONFIG_BLUEZ=m -CONFIG_BLUEZ_L2CAP=m -CONFIG_BLUEZ_SCO=m -CONFIG_BLUEZ_BNEP=m -CONFIG_BNEP_MC_FILTER=y -CONFIG_BNEP_PROTO_FILTER=y - -# -# Bluetooth device drivers -# -CONFIG_BLUEZ_HCIUSB=m -# CONFIG_BLUEZ_USB_ZERO_PACKET is not set -CONFIG_BLUEZ_HCIUART=m -CONFIG_BLUEZ_HCIUART_H4=y -# CONFIG_BLUEZ_HCIDTL1 is not set -# CONFIG_BLUEZ_HCIBT3C is not set -# CONFIG_BLUEZ_HCIBLUECARD is not set -CONFIG_BLUEZ_HCIVHCI=m - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/aa/gentoo.lss b/src/livecd/profiles/aa/gentoo.lss Binary files differdeleted file mode 100644 index 6c7c89c82b..0000000000 --- a/src/livecd/profiles/aa/gentoo.lss +++ /dev/null diff --git a/src/livecd/profiles/aa/help.msg b/src/livecd/profiles/aa/help.msg deleted file mode 100644 index d020308813..0000000000 --- a/src/livecd/profiles/aa/help.msg +++ /dev/null @@ -1,26 +0,0 @@ -Gentoo Linux 1.4 LiveCD boot options - [F1 to redisplay boot graphic] - -At the prompt type "gentoo option" -available at prompt "gentoo,acpi,memtest" -or just hit enter if no options are needed. -Type "acpi option" at a prompt to enable acpi on the default gentoo kernel -If you experience a lockup please try to boot the cd after a poweroff. - -agpgart loads agpgart (use if you have graphic problems,lockups) -doscsi scan for scsi devices (breaks some ethernet cards) -nodetect causes hwsetup/kudzu and hotplug not to run -dofirewire modprobes firewire modules in initrd (for firewire cdroms,etc) -nousb disables usb module load from initrd, disables hotplug -nodhcp dhcp does not automatically start if nic detected -doataraid loads ide raid modules from initrd -dopcmcia starts pcmcia service -noapm disables apm module load -noraid disables loading of evms modules -nohotplug disables loading hotplug service -ide=nodma Force disabling of dma for malfunctioning ide devices -cdcache Cache the entire runtime portion of cd in ram, This - uses 40mb of RAM , but allows you to umount /mnt/cdrom - and mount another cdrom. -noraid disables autoloading of evms modules -dokeymap enable keymap selection for non-us keyboard layouts -noapic disable apic (try if having hardware problems ,nics,scsi,etc) diff --git a/src/livecd/profiles/aa/isolinux.cfg b/src/livecd/profiles/aa/isolinux.cfg deleted file mode 100644 index aa3743ee00..0000000000 --- a/src/livecd/profiles/aa/isolinux.cfg +++ /dev/null @@ -1,25 +0,0 @@ -default gentoo - -#timeout 10 -prompt 0 -#display boot.msg -display boot1.msg -F1 boot.msg -F2 help.msg - -label gentoo - kernel gentoo - append splash=silent vga=791 initrd=initrd.1024 acpi=off root=/dev/ram0 init=/linuxrc nomce - -label acpi - kernel gentoo - append splash=silent vga=791 initrd=initrd acpi=on root=/dev/ram0 init=/linuxrc nomce - -label nofb - kernel gentoo - append vga=normal initrd=initrd acpi=off root=/dev/ram0 init=/linuxrc nomce - -label memtest - kernel memtest - - diff --git a/src/livecd/profiles/aa/kernel-config b/src/livecd/profiles/aa/kernel-config deleted file mode 100644 index 466f2a02c3..0000000000 --- a/src/livecd/profiles/aa/kernel-config +++ /dev/null @@ -1,1294 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -# CONFIG_LOLAT is not set -# CONFIG_LOLAT_SYSCTL is not set -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M686 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -# CONFIG_MK7 is not set -# CONFIG_MK8 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_THINKPAD is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_1GB is not set -CONFIG_2GB=y -# CONFIG_3GB is not set -# CONFIG_05GB is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -CONFIG_CARDBUS=y -CONFIG_TCIC=y -CONFIG_I82092=y -CONFIG_I82365=y - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -CONFIG_EVMS_GPT_SEGMENT_MGR=m -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -# CONFIG_EVMS_OS2 is not set -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -# CONFIG_CRYPTO is not set -# CONFIG_CIPHERS is not set -# CONFIG_DIGESTS is not set -# CONFIG_CRYPTODEV is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_IPSEC is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -CONFIG_IDE_TASK_IOCTL=y -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_BLK_DEV_GENERIC is not set -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_TRIFLEX=y -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_BLK_DEV_NFORCE=y -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX_OLD=y -# CONFIG_PDC202XX_BURST is not set -CONFIG_BLK_DEV_PDC202XX_NEW=y -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_SC1200=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIIMAGE=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_PDC202XX=y -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m -CONFIG_BLK_DEV_ATARAID_SII=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_BUILD_FIRMWARE is not set -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -CONFIG_SCSI_SYM53C8XX=m -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -CONFIG_SCSI_PCMCIA=y -CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_FDOMAIN=m -CONFIG_PCMCIA_NINJA_SCSI=m -CONFIG_PCMCIA_QLOGIC=m - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_MAX_SGE=40 -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_TYPHOON=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_AMD8111_ETH=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -# CONFIG_EEPRO100_PIO is not set -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_R8169=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -CONFIG_PCMCIA_IBMTR=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_AIRONET4500_CS=m - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m -CONFIG_USB_AUERISDN=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_ECC is not set -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_IPMI_PANIC_EVENT is not set -# CONFIG_IPMI_DEVICE_INTERFACE is not set -# CONFIG_IPMI_KCS is not set -# CONFIG_IPMI_WATCHDOG is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_SCx200_GPIO is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set - -# -# PCMCIA character devices -# -CONFIG_PCMCIA_SERIAL_CS=m -CONFIG_SYNCLINK_CS=m -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_PROC_CONFIG=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -# CONFIG_IMON is not set - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=y -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=y -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -# CONFIG_USB_LCD is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Windows Applications support -# -# CONFIG_MKI is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/aa/keymaps/bin-keymaps.tar.gz b/src/livecd/profiles/aa/keymaps/bin-keymaps.tar.gz Binary files differdeleted file mode 100644 index 8895ca4689..0000000000 --- a/src/livecd/profiles/aa/keymaps/bin-keymaps.tar.gz +++ /dev/null diff --git a/src/livecd/profiles/aa/keymaps/key.lst b/src/livecd/profiles/aa/keymaps/key.lst deleted file mode 100644 index 7396871474..0000000000 --- a/src/livecd/profiles/aa/keymaps/key.lst +++ /dev/null @@ -1,10 +0,0 @@ -Please select a keymap from the following list by typing in the appropriate -name or number. Hit Enter for the default "us/41" US English keymap. - - 1 azerty 7 cf 13 es 19 il 25 mk 31 ru 37 trf - 2 be 8 croat 14 et 20 is 26 nl 32 se 38 trq - 3 bg 9 cz 15 fi 21 it 27 no 33 sg 39 ua - 4 br-a 10 de 16 fr 22 jp 28 pl 34 sk-y 40 uk - 5 br-l 11 dk 17 gr 23 la 29 pt 35 sk-z 41 us - 6 by 12 dvorak 18 hu 24 lt 30 ro 36 slovene 42 wangbe - diff --git a/src/livecd/profiles/aa/launcher/gamelaunch.pro b/src/livecd/profiles/aa/launcher/gamelaunch.pro deleted file mode 100644 index 81650932c1..0000000000 --- a/src/livecd/profiles/aa/launcher/gamelaunch.pro +++ /dev/null @@ -1,10 +0,0 @@ -SOURCES += main.cpp -unix { - UI_DIR = .ui - MOC_DIR = .moc - OBJECTS_DIR = .obj -} -FORMS = gamelaunch.ui -TEMPLATE =app -CONFIG += qt warn_on release -LANGUAGE = C++ diff --git a/src/livecd/profiles/aa/launcher/gamelaunch.ui b/src/livecd/profiles/aa/launcher/gamelaunch.ui deleted file mode 100644 index 84bb467f9c..0000000000 --- a/src/livecd/profiles/aa/launcher/gamelaunch.ui +++ /dev/null @@ -1,149 +0,0 @@ -<!DOCTYPE UI><UI version="3.1" stdsetdef="1"> -<class>dialog</class> -<widget class="QDialog"> - <property name="name"> - <cstring>dialog</cstring> - </property> - <property name="geometry"> - <rect> - <x>0</x> - <y>0</y> - <width>572</width> - <height>550</height> - </rect> - </property> - <property name="caption"> - <string>Gentoo GameCD Launcher</string> - </property> - <widget class="QLabel"> - <property name="name"> - <cstring>pixmapLabel1</cstring> - </property> - <property name="geometry"> - <rect> - <x>90</x> - <y>110</y> - <width>400</width> - <height>368</height> - </rect> - </property> - <property name="frameShape"> - <enum>NoFrame</enum> - </property> - <property name="frameShadow"> - <enum>Plain</enum> - </property> - <property name="pixmap"> - <pixmap>image0</pixmap> - </property> - <property name="scaledContents"> - <bool>true</bool> - </property> - </widget> - <widget class="QLabel"> - <property name="name"> - <cstring>textLabel1</cstring> - </property> - <property name="geometry"> - <rect> - <x>40</x> - <y>10</y> - <width>500</width> - <height>80</height> - </rect> - </property> - <property name="text"> - <string>Welcome to the <b>America's Army</b> GameCD! From this dialog, you can launch the game and restart or shutdown your system. We hope you enjoy the <b>America's Army</b> GameCD and... "Hooah!"</string> - </property> - <property name="alignment"> - <set>WordBreak|AlignBottom</set> - </property> - </widget> - <widget class="QPushButton"> - <property name="name"> - <cstring>launchb</cstring> - </property> - <property name="geometry"> - <rect> - <x>20</x> - <y>490</y> - <width>230</width> - <height>31</height> - </rect> - </property> - <property name="font"> - <font> - </font> - </property> - <property name="text"> - <string>&Launch America's Army</string> - </property> - </widget> - <widget class="QPushButton"> - <property name="name"> - <cstring>restartb</cstring> - </property> - <property name="geometry"> - <rect> - <x>430</x> - <y>490</y> - <width>120</width> - <height>31</height> - </rect> - </property> - <property name="text"> - <string>&Restart</string> - </property> - </widget> - <widget class="QPushButton"> - <property name="name"> - <cstring>webb</cstring> - </property> - <property name="geometry"> - <rect> - <x>270</x> - <y>490</y> - <width>140</width> - <height>31</height> - </rect> - </property> - <property name="text"> - <string>&Web Browser</string> - </property> - </widget> -</widget> -<images> - <image name="image0"> - <data format="XPM.GZ" length="300003">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</data> - </image> -</images> -<connections> - <connection> - <sender>launchb</sender> - <signal>clicked()</signal> - <receiver>dialog</receiver> - <slot>launchGame()</slot> - </connection> - <connection> - <sender>restartb</sender> - <signal>clicked()</signal> - <receiver>dialog</receiver> - <slot>restartCD()</slot> - </connection> - <connection> - <sender>webb</sender> - <signal>clicked()</signal> - <receiver>dialog</receiver> - <slot>launchBrowser()</slot> - </connection> -</connections> -<includes> - <include location="local" impldecl="in implementation">gamelaunch.ui.h</include> -</includes> -<slots> - <slot>launchGame()</slot> - <slot>restartCD()</slot> - <slot>launchBrowser()</slot> -</slots> -<layoutdefaults spacing="6" margin="11"/> -</UI> diff --git a/src/livecd/profiles/aa/launcher/gamelaunch.ui.h b/src/livecd/profiles/aa/launcher/gamelaunch.ui.h deleted file mode 100644 index 859eb3c6bb..0000000000 --- a/src/livecd/profiles/aa/launcher/gamelaunch.ui.h +++ /dev/null @@ -1,36 +0,0 @@ -/**************************************************************************** -** ui.h extension file, included from the uic-generated form implementation. -** -** If you wish to add, delete or rename functions or slots use -** Qt Designer which will update this file, preserving your code. Create an -** init() function in place of a constructor, and a destroy() function in -** place of a destructor. -*****************************************************************************/ - -#include <unistd.h> - -void dialog::launchGame() -{ - - hide(); - chdir("/opt/armyops170/System"); - system("./armyops-bin"); - show(); -} - - - -void dialog::restartCD() -{ - hide(); - system("/sbin/reboot -ndfi"); - exit(0); -} - - -void dialog::launchBrowser() -{ - hide(); - system("/usr/bin/mozilla http://www.americasarmy.com"); - show(); -} diff --git a/src/livecd/profiles/aa/launcher/main.cpp b/src/livecd/profiles/aa/launcher/main.cpp deleted file mode 100644 index 3e7b143061..0000000000 --- a/src/livecd/profiles/aa/launcher/main.cpp +++ /dev/null @@ -1,11 +0,0 @@ -#include <qapplication.h> -#include "gamelaunch.h" - -int main( int argc, char ** argv ) -{ - QApplication a( argc, argv ); - dialog w; - w.show(); - a.connect( &a, SIGNAL( lastWindowClosed() ), &a, SLOT( quit() ) ); - return a.exec(); -} diff --git a/src/livecd/profiles/aa/linuxrc b/src/livecd/profiles/aa/linuxrc deleted file mode 100644 index 77449bfb26..0000000000 --- a/src/livecd/profiles/aa/linuxrc +++ /dev/null @@ -1,278 +0,0 @@ -#!/bin/sh -# -# Script to boot up a system with autodetection of CD location -# -# Daniel Robbins <drobbins@gentoo.org> -# Copyright 2002 Gentoo Technologies, Inc. -# Distributed under the GPL - -PATH=/usr/sbin:/usr/bin:/sbin:/bin -BACK_UP="\033[1K\033[0G" -HILITE="\033[1m" -NORMAL="\033[0m" -WARN="\033[1m" -BAD="\033[1m" -mount -oremount,rw / -mount /proc -# Disable kernel messages to console: -echo "0" > /proc/sys/kernel/printk -SCSI="no" -CDCACHE="no" -IDEBUG="no" -FIREWIRE="no" -ATARAID="no" -PCMCIA="no" -DETECT="no" -USB="yes" -KEYMAP="no" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "doscsi" ] - then - SCSI="yes" - elif [ "$x" = "cdcache" ] - then - CDCACHE="yes" - elif [ "$x" = "idebug" ] - then - IDEBUG="yes" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "dofirewire" ] - then - FIREWIRE="yes" - fi -done -for x in $CMDLINE -do - if [ "$x" = "nousb" ] - then - USB="no" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "doataraid" ] - then - ATARAID="yes" - fi -done -for x in $CMDLINE -do - if [ "$x" = "dopcmcia" ] - then - PCMCIA="yes" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "dokeymap" ] - then - KEYMAP="yes" - fi -done - -blurb() { - echo -ne ${HILITE}${1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} - -# Create the new root FS -mkdir newroot -mount -t tmpfs tmpfs /newroot -cd /newroot -mkdir dev mnt mnt/cdrom mnt/cloop mnt/.init.d mnt/gentoo - -if [ ! -e /newroot/dev/.devfsd ] -then - #mount devfs - mount -t devfs devfs /newroot/dev -fi - -mounted="" - -initmsg() { - echo -e "${HILITE}${*}${NORMAL}" -} - -nocd() { - echo -e "${HILITE}---- CD not found${NORMAL}" - umount /newroot - ash - umount /proc - exec /linuxrc -} - -getkeymap() { - local mykeymap - echo -ne ${HILITE} - cat /keymaps/key.lst - echo -ne ${NORMAL} - read -p "Keymap selection: " mykeymap - if [ -e /keymaps/${mykeymap}.map ] - then - echo -e "${HILITE}---- Loading ${mykeymap} keymap${NORMAL}" - loadkmap < /keymaps/${mykeymap}.map - elif [ "$mykeymap" = "" ] - then - #default keymap is "us" - echo -e "${HILITE}---- Loading default (US) keymap${NORMAL}" - loadkmap < /keymaps/us.map - else - getkeymap - fi -} - -modules_scan() { - local type - type=${1}; shift - for x in "$@" - do - if [ ! -e /modules/${type}/${x}.o ] - then - echo -e "${HILITE}---- Module ${x}.o not found; skipping...${NORMAL}" - continue - fi - blurb "---- Scanning for ${x}..." - insmod -f /modules/${type}/${x}.o > /dev/null 2>&1 - if [ $? -eq 0 ] - then - backup - echo -e "${GOOD}---- Detected ${x} hardware${NORMAL}" - else - backup - echo -ne "${NORMAL}" - fi - done -} - -findmount() { - if [ "$*" = "" ] - then - nocd - fi - while ! mount -t iso9660 -r $1 /newroot/mnt/cdrom; do - shift - if [ "$1" = "" ]; then - nocd - fi - done - if [ ! -e /newroot/mnt/cdrom/livecd.cloop -a ! -e /newroot/mnt/cdrom/livecd.loop ]; then - echo -e "${HILITE}---- $1 is not a LiveCD; skipping...${NORMAL}" - umount /newroot/mnt/cdrom - shift - findmount $* - fi - mounted=$1 - #echo -e "${HILITE}---- CD medium found on $1${NORMAL}" -} - -# Mount the CD -if [ "$SCSI" = "yes" ] -then -DEVICE=SCSI - echo -e "${HILITE}---- Beginning storage detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan storage ##STORAGE_MODULES## -fi - -if [ "$FIREWIRE" = "yes" ] -then -DEVICE=FIREWIRE - echo -e "${HILITE}---- Beginning firewire detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan firewire ##FIREWIRE_MODULES## -fi -if [ "$ATARAID" = "yes" ] -then -DEVICE=ATARAID - echo -e "${HILITE}---- Beginning ata detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan ataraid ##ATARAID_MODULES## -fi - -if [ "$PCMCIA" = "yes" ] -then -DEVICE=PCMCIA - echo -e "${HILITE}---- Beginning pcmcia detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan pcmcia ##PCMCIA_MODULES## -fi -if [ "$USB" = "yes" ] -then -DEVICE=USB - echo -e "${HILITE}---- Beginning usb detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan usb ##USB_MODULES## -fi - -if [ "$KEYMAP" = "yes" ] -then -getkeymap -fi - -#initmsg "---- Mounting the CD" -findmount /newroot/dev/cdroms/* -if [ "$IDEBUG" = "yes" ] -then - exec /bin/sh -fi -if [ -e /newroot/mnt/cdrom/livecd.cloop ] -then - #compressed loopback - mknod /dev/cloop b 240 0 - if [ "$CDCACHE" = "yes" ] - then - #initmsg "---- Attempting to cache CD image to tmpfs" - cp /newroot/mnt/cdrom/livecd.cloop /newroot/mnt/ - if [ $? -ne 0 ] - then - #initmsg "---- Caching failed (likely due to lack of space" - CDCACHE="no" - rm -f /newroot/mnt/livecd.cloop - else - insmod /modules/cloop.o file=/newroot/mnt/livecd.cloop >/dev/null 2>&1 - mount -o ro -t ext2 /dev/cloop /newroot/mnt/cloop - fi - fi - if [ "$CDCACHE" = "no" ] - then - #initmsg "---- Mounting compressed loopback filesystem" - insmod /modules/cloop.o file=/newroot/mnt/cdrom/livecd.cloop >/dev/null 2>&1 - mount -o ro -t ext2 /dev/cloop /newroot/mnt/cloop - fi -else - mknod /dev/loop0 b 7 0 - #initmsg "---- Mounting loopback filesystem" - losetup /dev/loop0 /newroot/mnt/cdrom/livecd.loop - mount -o ro -t ext2 /dev/loop0 /newroot/mnt/cloop -fi -# Now the CD is mounted on /newroot/cdrom -#initmsg "---- Copying and symlinking files from CD to populate /" - -cd /newroot/ -for x in bin sbin lib boot usr opt install.txt -do - ln -s mnt/cloop/${x} ${x} -done -mkdir initrd proc tmp -chmod 1777 tmp -(cd /newroot/mnt/cloop; cp -a etc root home var /newroot) -#store name of mounted CD so we can add it to mtab.... (/etc/init.d/local will take it -#from here... -echo $mounted > tmp/mycd - -#initmsg "---- Switching to tmpfs root filesystem" -echo "6" > /proc/sys/kernel/printk -umount /proc -pivot_root . initrd -exec chroot . /sbin/init </dev/console >/dev/console 2>&1 diff --git a/src/livecd/profiles/aa/net-setup b/src/livecd/profiles/aa/net-setup deleted file mode 100644 index b74ed027be..0000000000 --- a/src/livecd/profiles/aa/net-setup +++ /dev/null @@ -1,32 +0,0 @@ -#!/bin/bash -[ "$1" = "" ] && echo "net-setup: please specify a network interface" && exit 1 -[ ! -d /tmp/setup.opts ] && mkdir /tmp/setup.opts -cd /tmp/setup.opts -dialog --title "Network Setup" --menu "Time to set up the $1 interface! You can use DHCP to automatically configure a network interface or you can specify an IP and related settings manually. Choose one option:" 20 60 7 0 "Use DHCP to auto-detect my network settings" 1 "Specify an IP address manually" 2> ${1}.1 -mynetsel=`cat ${1}.1` -case $mynetsel in -0) - /sbin/dhcpcd -t 10 ${1} - ;; -1) - dialog --title "IP address" --inputbox "Please enter an IP address for $1:" 20 50 "192.168.1.1" 2> ${1}.IP - dialog --title "Broadcast address" --inputbox "Please enter a Broadcast address for $1:" 20 50 "192.168.1.255" 2> ${1}.B - dialog --title "Network mask" --inputbox "Please enter a Network Mask for $1:" 20 50 "255.255.255.0" 2> ${1}.NM - dialog --title "Gateway" --inputbox "Please enter a Gateway for $1 (hit enter for none:)" 20 50 2> ${1}.GW - dialog --title "DNS server" --inputbox "Please enter a name server to use (hit enter for none:)" 20 50 2> ${1}.NS - /sbin/ifconfig $1 `cat ${1}.IP` broadcast `cat ${1}.B` netmask `cat ${1}.NM` - myroute=`cat ${1}.GW` - if [ "$myroute" != "" ] - then - /sbin/route add default gw $myroute dev $1 netmask 0.0.0.0 metric 1 - fi - myns="`cat ${1}.NS`" - if [ "$myns" = "" ] - then - : > /etc/resolv.conf - else - echo "nameserver $myns" > /etc/resolv.conf - fi - ;; -esac -echo "Type \"ifconfig\" to make sure the interface was configured correctly." diff --git a/src/livecd/profiles/aa/opengl-update b/src/livecd/profiles/aa/opengl-update deleted file mode 100644 index a082ab2c63..0000000000 --- a/src/livecd/profiles/aa/opengl-update +++ /dev/null @@ -1,95 +0,0 @@ -#!/bin/bash -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# Author: Martin Schlemmer <azarah@gentoo.org> -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/aa/Attic/opengl-update,v 1.1 2003/10/19 03:10:49 livewire Exp $ - - -source /etc/init.d/functions.sh - -if [ `id -u` -ne 0 ] -then - eerror "${0}: must be root." - exit 1 -fi - -usage() { -cat << FOO -usage: opengl-update <GL implementation> - -note: - This utility switch between OpenGL implementations. Currently there - are two supported implementations, namely "xfree" and "nvidia", the - implementations for XFree86 and the NVidia drivers respectively. - -examples: - opengl-update xfree - This will setup things to use libGL.so from XFree86 - - opengl-update nvidia - This will setup things to use libGL.so from the NVidia drivers. - -FOO - exit 1 -} - -if [ "$#" -ne 1 ] -then - usage -fi -if [ ! -d /usr/lib/opengl/${1} ] -then - usage -else - ebegin "Switching to ${1} OpenGL interface" - - #set up the $LDPATH - echo "LDPATH=/usr/lib/opengl/${1}/lib" >/etc/env.d/09opengl - /usr/sbin/env-update &>/dev/null - - #setup the /usr/lib/libGL.so symlink - rm -f /etc/opengl/libGL.so /etc/opengl/libGL.so.1 - - realname="$(readlink /usr/lib/opengl/${1}/lib/libGL.so)" - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libGL.so - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libGL.so.1 - - #setup the /usr/X11R6/lib/libMesaGL.so symlink - rm -f /etc/opengl/libMesaGL.so - realname="$(readlink /usr/lib/opengl/${1}/lib/libGL.so)" - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libMesaGL.so - - rm -f /etc/opengl/libGLcore.so* - - if [ -e /usr/lib/opengl/${1}/lib/libGLcore.so ] - then - realname="$(readlink /usr/lib/opengl/${1}/lib/libGLcore.so)" - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libGLcore.so - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libGLcore.so.1 - fi - - #setup the /usr/X11R6/lib/modules/extensions/libglx.so symlink - rm -f /etc/opengl/libglx.* - - if [ -e /usr/lib/opengl/${1}/extensions/libglx.so ] - then - ln -sf /usr/lib/opengl/${1}/extensions/libglx.so \ - /etc/opengl/libglx.so - fi - #setup the /usr/X11R6/lib/modules/extensions/libglx.a symlink - if [ -e /usr/lib/opengl/${1}/extensions/libglx.a ] - then - ln -sf /usr/lib/opengl/${1}/extensions/libglx.a \ - /etc/opengl/libglx.a - fi - - eend 0 -fi - - -# vim:ts=4 diff --git a/src/livecd/profiles/aa/openglify b/src/livecd/profiles/aa/openglify deleted file mode 100644 index 5b31383f42..0000000000 --- a/src/livecd/profiles/aa/openglify +++ /dev/null @@ -1,29 +0,0 @@ -#!/bin/bash -#This script is designed to tweak the system for CD-based opengl-update -#set up our flexible opengl stuff: - -#if [ ! -e ${CD_BUILDCHROOT}/etc/opengl ] -#then - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/opengl-update ${CD_BUILDCHROOT}/usr/sbin - #move symlinks to a malleable /etc/opengl directory. - install -d ${CD_BUILDCHROOT}/etc/opengl - mv ${CD_BUILDCHROOT}/usr/lib/libGL.* ${CDROOT}/etc/opengl/ - mv ${CD_BUILDCHROOT}/usr/lib/libGLcore.* ${CDROOT}/etc/opengl/ - ln -sf /etc/opengl/libGL.so ${CD_BUILDCHROOT}/usr/lib/libGL.so - ln -sf /etc/opengl/libGL.so.1 ${CD_BUILDCHROOT}/usr/lib/libGL.so.1 - ln -sf /etc/opengl/libGLcore.so ${CD_BUILDCHROOT}/usr/lib/libGLcore.so - ln -sf /etc/opengl/libGLcore.so.1 ${CD_BUILDCHROOT}/usr/lib/libGLcore.so.1 - mv ${CD_BUILDCHROOT}/usr/X11R6/lib/libMesaGL.so ${CDROOT}/etc/opengl/ - ln -sf /etc/opengl/libMesaGL.so ${CD_BUILDCHROOT}/usr/X11R6/lib/libMesaGL.so - for x in libglx.a libglx.so - do - if [ -e ${CD_BUILDCHROOT}/usr/X11R6/lib/modules/extensions/${x} -o -L \ - ${CD_BUILDCHROOT}/usr/X11R6/lib/modules/extensions/${x} ] - then - mv ${CD_BUILDCHROOT}/usr/X11R6/lib/modules/extensions/${x} ${CDROOT}/etc/opengl/ - fi - ln -s /etc/opengl/${x} \ - ${CD_BUILDCHROOT}/usr/X11R6/lib/modules/extensions/${x} - done -#fi - diff --git a/src/livecd/profiles/aa/post-clean b/src/livecd/profiles/aa/post-clean deleted file mode 100644 index 3ac75bd216..0000000000 --- a/src/livecd/profiles/aa/post-clean +++ /dev/null @@ -1,8 +0,0 @@ -#!/bin/bash -install -m0755 ${LIVECD_ROOT}/profiles/${CD_PROFILE}/x-setup ${CD_BUILDCHROOT}/usr/sbin/x-setup -install -m0755 ${LIVECD_ROOT}/profiles/${CD_PROFILE}/xinitrc ${CD_BUILDCHROOT}/root/.xinitrc -install -m0644 ${LIVECD_ROOT}/profiles/${CD_PROFILE}/XF86Config.* ${CD_BUILDCHROOT}/etc/X11/ -tar -zxvf ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/${GAME_TAR} -C ${CD_BUILDCHROOT}/opt || die -tar -jxvf ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/root.tar.bz2 -C ${CD_BUILDCHROOT}/ || die -tar -jxvf ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fluxbox.tar.bz2 -C ${CD_BUILDCHROOT}/root || die - diff --git a/src/livecd/profiles/aa/pre-clean b/src/livecd/profiles/aa/pre-clean deleted file mode 100644 index 5861837701..0000000000 --- a/src/livecd/profiles/aa/pre-clean +++ /dev/null @@ -1,97 +0,0 @@ -#!/bin/bash -echo "$CD_HOSTNAME" > ${CD_BUILDCHROOT}/etc/hostname || die -#modprobe has a bug and auto-adds a "above hid keybdev mousedev" line to it's internel configuration. -#this fixes it.... -echo "above hid" > ${CD_BUILDCHROOT}/etc/modules.d/hidfix -#rm ${CD_BUILDCHROOT}/etc/init.d/iptables -install -d ${CD_BUILDCHROOT}/var/state/init.d || die -install -d ${CD_BUILDCHROOT}/root/.armyops || die -install -d ${CD_BUILDCHROOT}/root/.armyops/System || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/armyops/System/*.ini ${CD_BUILDCHROOT}/root/.armyops/System || die -cp ${CD_BUILDCHROOT}/etc/init.d/net.eth0 ${CD_BUILDCHROOT}/etc/init.d/net.eth1 -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/bash_profile ${CD_BUILDCHROOT}/root/.bash_profile || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/modules ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/checkroot ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/md ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/hotplug ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/aumix ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/checkfs ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/mingetty ${CD_BUILDCHROOT}/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/autoconfig ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/usleep ${CD_BUILDCHROOT}/sbin || die -#cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/depscan.sh ${CD_BUILDCHROOT}/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/login.defs ${CD_BUILDCHROOT}/etc || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/functions.sh ${CD_BUILDCHROOT}/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/local ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fstab ${CD_BUILDCHROOT}/etc || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/net-setup ${CD_BUILDCHROOT}/usr/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/profile ${CD_BUILDCHROOT}/etc || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/net ${CD_BUILDCHROOT}/etc/conf.d || die -mv ${CD_BUILDCHROOT}/sbin/splash ${CD_BUILDCHROOT}/sbin/splash.bin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/splash ${CD_BUILDCHROOT}/sbin/ || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/functions.sh ${CD_BUILDCHROOT}/sbin/ || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/rc ${CD_BUILDCHROOT}/sbin/ || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fbtruetype.static ${CD_BUILDCHROOT}/sbin/ || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fbtruetype.static ${CD_BUILDCHROOT}/sbin/fbtruetype || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fbresolution ${CD_BUILDCHROOT}/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/splash.bin ${CD_BUILDCHROOT}/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/bg.png ${CD_BUILDCHROOT}/usr/share/commonbox/backgrounds || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/menu.blackbox ${CD_BUILDCHROOT}/usr/share/commonbox/menu || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/bootsplash-1024x768.cfg ${CD_BUILDCHROOT}/etc/bootsplash/gentoo/config || die -rm -f ${CD_BUILDCHROOT}/usr/share/hwdata/pci.ids -rm -f ${CD_BUILDCHROOT}/usr/share/hwdata/usb.ids -ln -s /usr/share/misc/pci.ids ${CD_BUILDCHROOT}/usr/share/hwdata/pci.ids -ln -s /usr/share/misc/usb.ids ${CD_BUILDCHROOT}/usr/share/hwdata/usb.ids -install -d ${CD_BUILDCHROOT}/usr/share/fonts || die -#ln -s /usr/X11R6/lib/X11/fonts/{TTF,100dpi,75dpi,PEX,Speedo,Type1,truetype,encodings} ${CD_BUILDCHROOT}/usr/share/fonts || die -rm -f ${CD_BUILDCHROOT}/lib/evms/libe2fsim.1.2.1.so -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/install.txt ${CD_BUILDCHROOT}/ || die -echo usbcore >> ${CD_BUILDCHROOT}/etc/hotplug/blacklist -chmod +x ${CD_BUILDCHROOT}/usr/sbin/net-setup || die -mymotd=${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/motd -[ -e $mymotd ] && cp $mymotd ${CD_BUILDCHROOT}/etc -echo "CDBOOT=1" >> ${CD_BUILDCHROOT}/etc/rc.conf || die -echo "svcdir=/var/state/init.d" >> ${CD_BUILDCHROOT}/etc/conf.d/rc || die -echo "127.0.0.1 cdimage localhost" > ${CD_BUILDCHROOT}/etc/hosts || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/inittab ${CD_BUILDCHROOT}/etc || die -mount_all -cat > $CD_BUILDTEMP/chroot-clean << EOF -#!/bin/bash -source /etc/profile -#do our hid fix... -modules-update -cd /usr/src/linux -#produce correct module dependency information -make _modinst_post -rc-update del iptables default -rc-update del netmount default -rc-update add autoconfig default -#rc-update add md default -#remove standard keymap support: -rc-update del keymaps -rc-update del consolefont -rc-update add metalog default -#rc-update add aumix default -fc-cache --force -update-modules -modules-update -#OK, we can't run env-update on the CD itself (likely no python) -#so we will tweak opengl stuff here... -rm /etc/env.d/09opengl -env-update -cp /etc/ld.so.conf /etc/ld.so.conf.orig -rm /usr/sbin/env-update -EOF -chmod +x $CD_BUILDTEMP/chroot-clean -chroot $CD_BUILDCHROOT /tmp/livecd/chroot-clean -[ $? -ne 0 ] && chroot_die "chroot-clean failure" -umount_all -rm -rf ${CD_BUILDCHROOT}/etc/localtime -cp ${CD_BUILDCHROOT}/usr/share/zoneinfo/GMT ${CD_BUILDCHROOT}/etc/localtime || die - -if [ -e "${LIVECD_ROOT}/profiles/${CD_PROFILE}/openglify" ] -then - source ${LIVECD_ROOT}/profiles/${CD_PROFILE}/openglify -fi -find ${CD_BUILDCHROOT}/lib/modules -name modules.dep |xargs touch - diff --git a/src/livecd/profiles/aa/settings b/src/livecd/profiles/aa/settings deleted file mode 100644 index 946b4490df..0000000000 --- a/src/livecd/profiles/aa/settings +++ /dev/null @@ -1,39 +0,0 @@ -source ${LIVECD_ROOT}/profiles/global/settings -LOOP_MODE=cloop -CD_BUILDROOT=${CD_TEMPROOT}/${CD_PROFILE} -CD_PORTAGE_PROFILE="default-x86-1.4" -CD_USE="-gnome acpi4linux crypt ipv6 -doc -slang X gtk -arts -svga -directfb -ggi -esd -nas \ --perl -python -truetype -prebuilt" -#CD_CFLAGS="-O3 -mcpu=i686 -freorder-blocks -fprefetch-loop-arrays -pipe" -CD_CFLAGS="-march=pentium3 -mno-sse -O3 -pipe -finline-functions -fdelete-null-pointer-checks \ --fprefetch-loop-arrays -foptimize-sibling-calls -funroll-loops -frerun-loop-opt \ --frename-registers -fmove-all-movables -freorder-blocks" -CD_CXXFLAGS="${CD_CFLAGS}" -CD_STAGETARBALL=ftp://ftp.twobit.net/pub/stage3-pentium3-1.4_pre20030308.tar.bz2 -#CD_STAGETARBALL=http://distro.ibiblio.org/pub/Linux/distributions/gentoo/experimental/x86/stages/stage3-x86-1.4_pre20030214.tar.bz2 -#modules to auto-detect/copy to the initrd (put in the "/modules/storage" directory) -#aic7xxx_old removed from position after aic7xxx in attempt to fix bugs #12185 and #11278 -STORAGE_MODULES="aic7xxx aic7xxx_old BusLogic \ -ncr53c8xx NCR53c406a \ -initio advansys aha1740 aha1542 aha152x \ -atp870u dtc eata fdomain gdth \ -megaraid pas16 pci2220i pci2000 psi240i \ -qlogicfas qlogicfc qlogicisp \ -seagate t128 tmscsim u14-34f ultrastor wd7000 \ -a100u2w 3w-xxxx DAC960 NCR53c406a \ -aacraid sym53c8xx a100u2w cpqfc \ -dmx3191d dpt_i2o imm in2000 ips qla1280 \ -sim710 sym53c416" -FIREWIRE_MODULES="ieee1394 ohci1394 eth1394 sbp2" -ATARAID_MODULES="ataraid pdcraid hptraid" -PCMCIA_MODULES="ide-cs" -USB_MODULES="usbcore ehci-hcd uhci usb-ohci hid usb-storage" -LOOP_SIZE="1400000" -KERNCONFIG=gaming-config2 -CD_HOSTNAME="cdimage" -CD_PORTDIR="/usr/portage" -CD_ISONAME="gentoo.iso" -ARCH=x86 -###requires 1280.initrd , 1024.initrd, 800.initrd bootsplash initrds in aux-files -BOOTSPLASH=yes -GAME_TAR=armyops170-lnxbeta6.tar.gz diff --git a/src/livecd/profiles/aa/stage1-experimental b/src/livecd/profiles/aa/stage1-experimental deleted file mode 100644 index bf7624d67b..0000000000 --- a/src/livecd/profiles/aa/stage1-experimental +++ /dev/null @@ -1,15 +0,0 @@ -=sys-kernel/gaming-sources-2.4.20-r3 -xfree -#aumix depends on xfree, so it needs to be here -aumix -iputils -kudzu -hwdata-knoppix -hwsetup -bootsplash -=sys-apps/baselayout-1.8.6.6 -x11-libs/qt -mozilla -xloadimage -giflib -fluxbox diff --git a/src/livecd/profiles/aa/stage1-packages b/src/livecd/profiles/aa/stage1-packages deleted file mode 100644 index d4432839cc..0000000000 --- a/src/livecd/profiles/aa/stage1-packages +++ /dev/null @@ -1,18 +0,0 @@ -metalog -sys-apps/pciutils -#net-www/lynx -sys-apps/e2fsprogs -sys-apps/reiserfs-utils -sys-apps/hdparm -app-editors/nano -sys-apps/less -net-misc/openssh -net-misc/dhcpcd -mingetty -pwgen -hotplug -dietlibc -popt -dialog -=sys-apps/modutils-2.4.25 -x11-libs/qt diff --git a/src/livecd/profiles/aa/stage2-experimental b/src/livecd/profiles/aa/stage2-experimental deleted file mode 100644 index aab91526b3..0000000000 --- a/src/livecd/profiles/aa/stage2-experimental +++ /dev/null @@ -1,3 +0,0 @@ -nvidia-kernel -nvidia-glx -ati-drivers diff --git a/src/livecd/profiles/aa/stage2-packages b/src/livecd/profiles/aa/stage2-packages deleted file mode 100644 index b634c4cb16..0000000000 --- a/src/livecd/profiles/aa/stage2-packages +++ /dev/null @@ -1,6 +0,0 @@ -net-wireless/wireless-tools -sys-apps/iproute -sys-apps/pcmcia-cs -net-misc/nforce-net -linux-wlan-ng -emu10k1 diff --git a/src/livecd/profiles/aa/x-setup b/src/livecd/profiles/aa/x-setup deleted file mode 100644 index dc5c7b5189..0000000000 --- a/src/livecd/profiles/aa/x-setup +++ /dev/null @@ -1,79 +0,0 @@ -#!/bin/bash -#first, get paths right if we're getting started b4 login -source /etc/profile - -echo "0" > /proc/sys/kernel/printk -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "agpgart" ] - then - modprobe agpgart > /dev/null 2>&1 - fi -done - -GLTYPE=nvidia -#now, for the key component :) -modprobe nvidia > /dev/null 2>&1 -if [ "`lsmod | cut -f1 -d\" \" | grep ^nvidia$`" = "nvidia" ] -then - echo "NVIDIA driver loaded." -else - modprobe fglrx > /dev/null 2>&1 - if [ "`lsmod | cut -f1 -d\" \" | grep ^fglrx$`" = "fglrx" ] - then - echo "ATI driver loaded." - GLTYPE=ati - else - echo "**********************************************************" - echo "NVIDIA or ATI drivers unable to load; aborting." - echo "This demo requires modern NVIDIA or ATI graphics hardware." - echo "**********************************************************" - echo "" - if [ -e /proc/splash ] - then - echo "*******************************" - echo "Entering Vesa browser-only mode" - echo "*******************************" - sleep 3 - GLTYPE=xfree - fi - fi - -fi -opengl-update $GLTYPE - -if [ ! -e /etc/sysconfig/mouse ] -then - echo "A mouse could not be detected; aborting." - echo "Please make sure a mouse is attached to your system." - exit 1 -fi -source /etc/sysconfig/mouse - -VERTREFRESH=`ddcxinfo -vsync` - -if [ "$VERTREFRESH" = "0-0" ] -then - echo "No DDC information detected; assuming reasonable defaults." - VERTREFRESH=50-80 - HORIZSYNC=30-70 -else - HORIZSYNC=`ddcxinfo -hsync` -fi - -sed -e "s:##MOUSEPROTO##:${XMOUSETYPE}:" \ - -e "s:##MOUSEDEV##:${DEVICE}:" \ - -e "s:##VERTREFRESH##:${VERTREFRESH}:" \ - -e "s:##HORIZSYNC##:${HORIZSYNC}:" \ -/etc/X11/XF86Config.${GLTYPE} > /etc/X11/XF86Config - -#Now, we need to export LD_PATH since env-update can't do this for us (no python, -#/etc/env.d/09opengl removed... - -cp /etc/ld.so.conf.orig /etc/ld.so.conf -echo /usr/lib/opengl/${GLTYPE}/lib >> /etc/ld.so.conf -ldconfig -#time to fire up X -exec /usr/X11R6/bin/xinit - diff --git a/src/livecd/profiles/aa/xfs-config b/src/livecd/profiles/aa/xfs-config deleted file mode 100644 index a6bd191872..0000000000 --- a/src/livecd/profiles/aa/xfs-config +++ /dev/null @@ -1,1314 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -# CONFIG_M68631 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_1GB is not set -CONFIG_2GB=y -# CONFIG_3GB is not set -# CONFIG_05GB is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -CONFIG_CARDBUS=y -CONFIG_TCIC=y -CONFIG_I82092=y -CONFIG_I82365=y - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -CONFIG_EVMS_GPT_SEGMENT_MGR=m -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -CONFIG_EVMS_OS2=m -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -# CONFIG_CRYPTO is not set -# CONFIG_CIPHERS is not set -# CONFIG_DIGESTS is not set -# CONFIG_CRYPTODEV is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_IPSEC is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -CONFIG_IDE_TASK_IOCTL=y -# CONFIG_IDE_TASKFILE_IO is not set -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_CMD680 is not set -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -# CONFIG_PDC202XX_BURST is not set -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_BUILD_FIRMWARE is not set -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -CONFIG_SCSI_SYM53C8XX=m -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC395x_TRMS1040=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -CONFIG_SCSI_PCMCIA=y -CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_FDOMAIN=m -CONFIG_PCMCIA_NINJA_SCSI=m -CONFIG_PCMCIA_QLOGIC=m - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -CONFIG_PCMCIA_IBMTR=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_AIRONET4500_CS=m - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_ECC is not set -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set - -# -# PCMCIA character devices -# -CONFIG_PCMCIA_SERIAL_CS=m -CONFIG_SYNCLINK_CS=m -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_PROC_CONFIG=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_DMAPI is not set -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -# CONFIG_IMON is not set - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_UHCI=y -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=y -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -# CONFIG_USB_USBDNET is not set -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -# CONFIG_USB_LCD is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Windows Applications support -# -# CONFIG_MKI is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/aa/xinitrc b/src/livecd/profiles/aa/xinitrc deleted file mode 100644 index 8064af5e01..0000000000 --- a/src/livecd/profiles/aa/xinitrc +++ /dev/null @@ -1,44 +0,0 @@ -#!/bin/bash -cd /opt/armyops170/System -xsetroot -solid black -#this xinitrc uses xrandr to detect the current resolution, and then sets the appropriate -#ut2003-demo resolution. -REALX=`xrandr | grep "^\*" | awk '{ print $2 }'` -REALY=`xrandr | grep "^\*" | awk '{ print $4 }'` -OK=0 -for NEWRES in 1600x1200 1280x1024 1280x960 1024x768 800x600 640x480 512x384 320x200 -do - - NEWX=${NEWRES%%x*} - NEWY=${NEWRES##*x} - echo $NEWRES - if [ $NEWX -gt $REALX ] - then - #the NEWX is higher than our current Y res; continue.... - continue - fi - echo REALY $REALY - echo NEWY $NEWY - if [ $REALY -lt $NEWY ] - then - #our current Y res is less than our NEWY; continue... - continue - fi - #if we've gotten here, we want to use NEWXxNEWY as our aa resolution - OK=1 - break - - -done -#tweak ut2003 configuration file here -if [ "$OK" = "0" ] -then - echo ".xinitrc: couldn't identify proper America's Army resolution; exiting." - exit 1 -fi - -#test -f /proc/splash && echo "show 65535" > /proc/splash -#bsetbg /usr/share/commonbox/backgrounds/gentoo.jpg -exec /usr/sbin/gamelaunch & -#blackbox -fluxbox diff --git a/src/livecd/profiles/gentoo-basic/kernel-config b/src/livecd/profiles/gentoo-basic/kernel-config deleted file mode 100644 index 75e5d76cc9..0000000000 --- a/src/livecd/profiles/gentoo-basic/kernel-config +++ /dev/null @@ -1,1250 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -# CONFIG_M68631 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_1GB is not set -CONFIG_2GB=y -# CONFIG_3GB is not set -# CONFIG_05GB is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -CONFIG_SMP=y -# CONFIG_MULTIQUAD is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -# CONFIG_PCMCIA is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_IBM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -# CONFIG_PM is not set -# CONFIG_APM is not set - -# -# ACPI Support -# -CONFIG_ACPI=y -# CONFIG_ACPI_HT_ONLY is not set -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=y -CONFIG_ACPI_BATTERY=y -CONFIG_ACPI_BUTTON=y -CONFIG_ACPI_FAN=y -CONFIG_ACPI_PROCESSOR=y -CONFIG_ACPI_THERMAL=y -CONFIG_ACPI_TOSHIBA=y -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -CONFIG_EVMS_GPT_SEGMENT_MGR=m -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -CONFIG_EVMS_OS2=m -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -# CONFIG_CRYPTO is not set -# CONFIG_CIPHERS is not set -# CONFIG_DIGESTS is not set -# CONFIG_CRYPTODEV is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_CMD680=y -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -CONFIG_PDC202XX_BURST=y -CONFIG_PDC202XX_FORCE=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -CONFIG_SCSI_SYM53C8XX=m -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC395x_TRMS1040=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -CONFIG_TMS380TR=m -CONFIG_TMSPCI=m -CONFIG_TMSISA=m -CONFIG_ABYSS=m -# CONFIG_MADGEMC is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -# CONFIG_COMPUTONE is not set -# CONFIG_ROCKETPORT is not set -# CONFIG_CYCLADES is not set -# CONFIG_DIGIEPCA is not set -# CONFIG_DIGI is not set -# CONFIG_ESPSERIAL is not set -# CONFIG_MOXA_INTELLIO is not set -# CONFIG_MOXA_SMARTIO is not set -# CONFIG_ISI is not set -# CONFIG_SYNCLINK is not set -# CONFIG_SYNCLINKMP is not set -CONFIG_N_HDLC=m -# CONFIG_RISCOM8 is not set -# CONFIG_SPECIALIX is not set -# CONFIG_SX is not set -# CONFIG_RIO is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -CONFIG_AGP_INTEL=y -CONFIG_AGP_I810=y -CONFIG_AGP_VIA=y -CONFIG_AGP_AMD=y -CONFIG_AGP_AMD_8151=y -CONFIG_AGP_SIS=y -CONFIG_AGP_ALI=y -CONFIG_AGP_SWORKS=y -CONFIG_DRM=y -# CONFIG_DRM_OLD is not set -CONFIG_DRM_NEW=y -CONFIG_DRM_TDFX=m -CONFIG_DRM_R128=m -CONFIG_DRM_RADEON=m -# CONFIG_DRM_I810 is not set -# CONFIG_DRM_I810_XFREE_41 is not set -# CONFIG_DRM_I830 is not set -CONFIG_DRM_MGA=m -# CONFIG_DRM_SIS is not set -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -# CONFIG_ROMFS_FS is not set -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=m -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -CONFIG_XFS_QUOTA=y -CONFIG_XFS_DMAPI=y -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_IMON=y -CONFIG_EXECOUNT=y - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=y -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=y -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -# CONFIG_USB_LCD is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Windows Applications support -# -# CONFIG_MKI is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/gentoo-basic/kernel-config-2.4.20_pre4 b/src/livecd/profiles/gentoo-basic/kernel-config-2.4.20_pre4 deleted file mode 100644 index 4037e62f04..0000000000 --- a/src/livecd/profiles/gentoo-basic/kernel-config-2.4.20_pre4 +++ /dev/null @@ -1,1281 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -# CONFIG_M68631 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_1GB is not set -CONFIG_2GB=y -# CONFIG_3GB is not set -# CONFIG_05GB is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -CONFIG_SMP=y -# CONFIG_MULTIQUAD is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -# CONFIG_PCMCIA is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_IBM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -# CONFIG_PM is not set -# CONFIG_APM is not set - -# -# ACPI Support -# -CONFIG_ACPI=y -# CONFIG_ACPI_HT_ONLY is not set -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=y -CONFIG_ACPI_BATTERY=y -CONFIG_ACPI_BUTTON=y -CONFIG_ACPI_FAN=y -CONFIG_ACPI_PROCESSOR=y -CONFIG_ACPI_THERMAL=y -CONFIG_ACPI_TOSHIBA=y -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -CONFIG_EVMS_GPT_SEGMENT_MGR=m -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -CONFIG_EVMS_OS2=m -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -# CONFIG_CRYPTO is not set -# CONFIG_CIPHERS is not set -# CONFIG_DIGESTS is not set -# CONFIG_CRYPTODEV is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_IPSEC is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -CONFIG_IDE_TASK_IOCTL=y -CONFIG_IDE_TASKFILE_IO=y -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_CMD680=y -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -CONFIG_PDC202XX_BURST=y -CONFIG_PDC202XX_FORCE=y -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_BUILD_FIRMWARE is not set -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -CONFIG_SCSI_SYM53C8XX=m -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC395x_TRMS1040=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -CONFIG_TMS380TR=m -CONFIG_TMSPCI=m -CONFIG_TMSISA=m -CONFIG_ABYSS=m -# CONFIG_MADGEMC is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_ECC is not set -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -# CONFIG_COMPUTONE is not set -# CONFIG_ROCKETPORT is not set -# CONFIG_CYCLADES is not set -# CONFIG_DIGIEPCA is not set -# CONFIG_DIGI is not set -# CONFIG_ESPSERIAL is not set -# CONFIG_MOXA_INTELLIO is not set -# CONFIG_MOXA_SMARTIO is not set -# CONFIG_ISI is not set -# CONFIG_SYNCLINK is not set -# CONFIG_SYNCLINKMP is not set -CONFIG_N_HDLC=m -# CONFIG_RISCOM8 is not set -# CONFIG_SPECIALIX is not set -# CONFIG_SX is not set -# CONFIG_RIO is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -CONFIG_AGP_INTEL=y -CONFIG_AGP_I810=y -CONFIG_AGP_VIA=y -CONFIG_AGP_AMD=y -CONFIG_AGP_AMD_8151=y -CONFIG_AGP_SIS=y -CONFIG_AGP_ALI=y -CONFIG_AGP_SWORKS=y -CONFIG_DRM=y -# CONFIG_DRM_OLD is not set -CONFIG_DRM_NEW=y -CONFIG_DRM_TDFX=m -CONFIG_DRM_R128=m -CONFIG_DRM_RADEON=m -# CONFIG_DRM_I810 is not set -# CONFIG_DRM_I810_XFREE_41 is not set -# CONFIG_DRM_I830 is not set -CONFIG_DRM_MGA=m -# CONFIG_DRM_SIS is not set -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -# CONFIG_ROMFS_FS is not set -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=m -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -CONFIG_XFS_QUOTA=y -CONFIG_XFS_DMAPI=y -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_IMON=y -CONFIG_EXECOUNT=y - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=y -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=y -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USBDNET=m -CONFIG_USB_USBDNET_VENDOR=0000 -CONFIG_USB_USBDNET_PRODUCT=0000 -CONFIG_USB_USBDNET_CLASS=0000 -CONFIG_USB_USBDNET_SUBCLASS=0000 -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -# CONFIG_USB_LCD is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Windows Applications support -# -# CONFIG_MKI is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -CONFIG_KDB=y -# CONFIG_KDB_MODULES is not set -# CONFIG_KDB_OFF is not set -# CONFIG_KDB_USB is not set -CONFIG_KALLSYMS=y - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/gentoo-basic/kernel-config-2.4.20_pre4-pcmcia b/src/livecd/profiles/gentoo-basic/kernel-config-2.4.20_pre4-pcmcia deleted file mode 100644 index fd2e8af260..0000000000 --- a/src/livecd/profiles/gentoo-basic/kernel-config-2.4.20_pre4-pcmcia +++ /dev/null @@ -1,1321 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -# CONFIG_M68631 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_1GB is not set -CONFIG_2GB=y -# CONFIG_3GB is not set -# CONFIG_05GB is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -CONFIG_SMP=y -# CONFIG_MULTIQUAD is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -CONFIG_CARDBUS=y -CONFIG_TCIC=y -CONFIG_I82092=y -CONFIG_I82365=y - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_IBM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -# CONFIG_PM is not set -# CONFIG_APM is not set - -# -# ACPI Support -# -CONFIG_ACPI=y -# CONFIG_ACPI_HT_ONLY is not set -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=y -CONFIG_ACPI_BATTERY=y -CONFIG_ACPI_BUTTON=y -CONFIG_ACPI_FAN=y -CONFIG_ACPI_PROCESSOR=y -CONFIG_ACPI_THERMAL=y -CONFIG_ACPI_TOSHIBA=y -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -CONFIG_EVMS_GPT_SEGMENT_MGR=m -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -CONFIG_EVMS_OS2=m -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -# CONFIG_CRYPTO is not set -# CONFIG_CIPHERS is not set -# CONFIG_DIGESTS is not set -# CONFIG_CRYPTODEV is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_IPSEC is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -CONFIG_IDE_TASK_IOCTL=y -CONFIG_IDE_TASKFILE_IO=y -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_CMD680=y -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -CONFIG_PDC202XX_BURST=y -CONFIG_PDC202XX_FORCE=y -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_BUILD_FIRMWARE is not set -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -CONFIG_SCSI_SYM53C8XX=m -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC395x_TRMS1040=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_SCSI_PCMCIA is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -# CONFIG_PCMCIA_HERMES is not set -# CONFIG_AIRO_CS is not set -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -CONFIG_TMS380TR=m -CONFIG_TMSPCI=m -CONFIG_TMSISA=m -CONFIG_ABYSS=m -# CONFIG_MADGEMC is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -CONFIG_PCMCIA_IBMTR=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_AIRONET4500_CS=m - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_ECC is not set -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -# CONFIG_COMPUTONE is not set -# CONFIG_ROCKETPORT is not set -# CONFIG_CYCLADES is not set -# CONFIG_DIGIEPCA is not set -# CONFIG_DIGI is not set -# CONFIG_ESPSERIAL is not set -# CONFIG_MOXA_INTELLIO is not set -# CONFIG_MOXA_SMARTIO is not set -# CONFIG_ISI is not set -# CONFIG_SYNCLINK is not set -# CONFIG_SYNCLINKMP is not set -CONFIG_N_HDLC=m -# CONFIG_RISCOM8 is not set -# CONFIG_SPECIALIX is not set -# CONFIG_SX is not set -# CONFIG_RIO is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -CONFIG_AGP_INTEL=y -CONFIG_AGP_I810=y -CONFIG_AGP_VIA=y -CONFIG_AGP_AMD=y -CONFIG_AGP_AMD_8151=y -CONFIG_AGP_SIS=y -CONFIG_AGP_ALI=y -CONFIG_AGP_SWORKS=y -CONFIG_DRM=y -# CONFIG_DRM_OLD is not set -CONFIG_DRM_NEW=y -CONFIG_DRM_TDFX=m -CONFIG_DRM_R128=m -CONFIG_DRM_RADEON=m -# CONFIG_DRM_I810 is not set -# CONFIG_DRM_I810_XFREE_41 is not set -# CONFIG_DRM_I830 is not set -CONFIG_DRM_MGA=m -# CONFIG_DRM_SIS is not set - -# -# PCMCIA character devices -# -# CONFIG_PCMCIA_SERIAL_CS is not set -# CONFIG_SYNCLINK_CS is not set -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -# CONFIG_ROMFS_FS is not set -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=m -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -CONFIG_XFS_QUOTA=y -CONFIG_XFS_DMAPI=y -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_IMON=y -CONFIG_EXECOUNT=y - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=y -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=y -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USBDNET=m -CONFIG_USB_USBDNET_VENDOR=0000 -CONFIG_USB_USBDNET_PRODUCT=0000 -CONFIG_USB_USBDNET_CLASS=0000 -CONFIG_USB_USBDNET_SUBCLASS=0000 -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -# CONFIG_USB_LCD is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Windows Applications support -# -# CONFIG_MKI is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -CONFIG_KDB=y -# CONFIG_KDB_MODULES is not set -# CONFIG_KDB_OFF is not set -# CONFIG_KDB_USB is not set -CONFIG_KALLSYMS=y - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/gentoo-basic/kernel-config-2.4.21-pre3-ac b/src/livecd/profiles/gentoo-basic/kernel-config-2.4.21-pre3-ac deleted file mode 100644 index 9148f12368..0000000000 --- a/src/livecd/profiles/gentoo-basic/kernel-config-2.4.21-pre3-ac +++ /dev/null @@ -1,1280 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M686 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -# CONFIG_MK7 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_EDD=y -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -CONFIG_SMP=y -# CONFIG_X86_NUMA is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -# CONFIG_SCx200 is not set -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -# CONFIG_PCMCIA is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_IBM is not set -# CONFIG_HOTPLUG_PCI_H2999 is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_IKCONFIG=y -# CONFIG_PM is not set -# CONFIG_ACPI is not set -# CONFIG_APM is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m -# CONFIG_PNPBIOS is not set - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m - -# -# Parallel IDE high-level drivers -# -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m - -# -# Parallel IDE protocol modules -# -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m -CONFIG_BLK_DEV_DM=m - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m - -# -# -# -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -CONFIG_IDE_TASK_IOCTL=y - -# -# IDE chipset support/bugfixes -# -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_TRIFLEX=y -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_BLK_DEV_NFORCE=y -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX_OLD=y -CONFIG_PDC202XX_BURST=y -CONFIG_BLK_DEV_PDC202XX_NEW=y -CONFIG_PDC202XX_FORCE=y -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_SC1200=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIIMAGE=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_PDC202XX=y -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m -CONFIG_BLK_DEV_ATARAID_SII=m - -# -# SCSI support -# -CONFIG_SCSI=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -CONFIG_SCSI_SYM53C8XX=m -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -CONFIG_SCSI_NSP32=m -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_MAX_SGE=40 -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_AMD8111_ETH=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_R8169=m -CONFIG_SK98LIN=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -CONFIG_TMS380TR=m -CONFIG_TMSPCI=m -CONFIG_TMSISA=m -CONFIG_ABYSS=m -# CONFIG_MADGEMC is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# low-level hardware drivers -# - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y - -# -# D-channel protocol features -# -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 - -# -# HiSax supported cards -# -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_ATI_CD1865=m -# CONFIG_COMPUTONE is not set -# CONFIG_ROCKETPORT is not set -# CONFIG_CYCLADES is not set -# CONFIG_DIGIEPCA is not set -# CONFIG_DIGI is not set -# CONFIG_ESPSERIAL is not set -# CONFIG_MOXA_INTELLIO is not set -# CONFIG_MOXA_SMARTIO is not set -# CONFIG_ISI is not set -# CONFIG_SYNCLINK is not set -# CONFIG_SYNCLINKMP is not set -CONFIG_N_HDLC=m -# CONFIG_RISCOM8 is not set -# CONFIG_SPECIALIX is not set -# CONFIG_SX is not set -# CONFIG_RIO is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set - -# -# Joysticks -# -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set -CONFIG_IPMI_HANDLER=m -# CONFIG_IPMI_PANIC_EVENT is not set -CONFIG_IPMI_DEVICE_INTERFACE=m -CONFIG_IPMI_KCS=m -CONFIG_IPMI_WATCHDOG=m - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_SCx200_GPIO is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -CONFIG_AGP_INTEL=y -CONFIG_AGP_I810=y -CONFIG_AGP_VIA=y -CONFIG_AGP_AMD=y -CONFIG_AGP_AMD_8151=y -CONFIG_AGP_SIS=y -CONFIG_AGP_ALI=y -CONFIG_AGP_SWORKS=y -CONFIG_DRM=y -# CONFIG_DRM_OLD is not set - -# -# DRM 4.1 drivers -# -CONFIG_DRM_NEW=y -CONFIG_DRM_TDFX=m -CONFIG_DRM_GAMMA=m -CONFIG_DRM_R128=m -CONFIG_DRM_RADEON=m -# CONFIG_DRM_I810 is not set -# CONFIG_DRM_I810_XFREE_41 is not set -# CONFIG_DRM_I830 is not set -CONFIG_DRM_MGA=m -# CONFIG_DRM_SIS is not set -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -# CONFIG_ROMFS_FS is not set -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=y -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=y - -# -# USB Device Class drivers -# -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set - -# -# USB Human Interface Devices (HID) -# -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_POWERMATE is not set - -# -# USB Imaging devices -# -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set - -# -# USB Multimedia devices -# - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network adaptors -# -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m - -# -# USB port drivers -# -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -# CONFIG_USB_LCD is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_PANIC_MORSE=y -# CONFIG_DEBUG_SPINLOCK is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/gentoo-basic/kernel-config-2.5.58 b/src/livecd/profiles/gentoo-basic/kernel-config-2.5.58 deleted file mode 100644 index 7bbccb904b..0000000000 --- a/src/livecd/profiles/gentoo-basic/kernel-config-2.5.58 +++ /dev/null @@ -1,1036 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_X86=y -CONFIG_MMU=y -CONFIG_SWAP=y -CONFIG_UID16=y -CONFIG_GENERIC_ISA_DMA=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# General setup -# -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_LOG_BUF_SHIFT_17 is not set -# CONFIG_LOG_BUF_SHIFT_16 is not set -CONFIG_LOG_BUF_SHIFT_15=y -# CONFIG_LOG_BUF_SHIFT_14 is not set -# CONFIG_LOG_BUF_SHIFT_13 is not set -# CONFIG_LOG_BUF_SHIFT_12 is not set -CONFIG_LOG_BUF_SHIFT=15 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_X86_PC=y -# CONFIG_X86_VOYAGER is not set -# CONFIG_X86_NUMAQ is not set -# CONFIG_X86_SUMMIT is not set -# CONFIG_X86_BIGSMP is not set -# CONFIG_M386 is not set -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M686 is not set -# CONFIG_MPENTIUMII is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -CONFIG_MK7=y -# CONFIG_MK8 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -CONFIG_X86_CMPXCHG=y -CONFIG_X86_XADD=y -CONFIG_X86_L1_CACHE_SHIFT=6 -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_X86_WP_WORKS_OK=y -CONFIG_X86_INVLPG=y -CONFIG_X86_BSWAP=y -CONFIG_X86_POPAD_OK=y -CONFIG_X86_TSC=y -CONFIG_X86_GOOD_APIC=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_USE_3DNOW=y -CONFIG_HUGETLB_PAGE=y -CONFIG_SMP=y -CONFIG_PREEMPT=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_X86_IO_APIC=y -CONFIG_NR_CPUS=4 -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_EDD=y -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -CONFIG_HAVE_DEC_LOCK=y - -# -# Power management options (ACPI, APM) -# -CONFIG_PM=y -# CONFIG_SOFTWARE_SUSPEND is not set - -# -# ACPI Support -# -CONFIG_ACPI=y -# CONFIG_ACPI_HT_ONLY is not set -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_AC=y -CONFIG_ACPI_BATTERY=y -CONFIG_ACPI_BUTTON=y -CONFIG_ACPI_FAN=y -CONFIG_ACPI_PROCESSOR=y -CONFIG_ACPI_THERMAL=y -CONFIG_ACPI_TOSHIBA=y -# CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SYSTEM=y -# CONFIG_APM is not set -# CONFIG_CPU_FREQ is not set - -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -# CONFIG_SCx200 is not set -# CONFIG_PCI_LEGACY_PROC is not set -CONFIG_PCI_NAMES=y -CONFIG_ISA=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -# CONFIG_PCMCIA is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats -# -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play support -# -CONFIG_PNP=y -CONFIG_PNP_NAMES=y -CONFIG_PNP_CARD=y -# CONFIG_PNP_DEBUG is not set - -# -# Protocols -# -# CONFIG_ISAPNP is not set -CONFIG_PNPBIOS=y - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -# CONFIG_PARIDE is not set -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_LBD=y - -# -# ATA/ATAPI/MFM/RLL device support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_IDE_TASK_IOCTL=y - -# -# IDE chipset support/bugfixes -# -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -CONFIG_BLK_DEV_IDE_TCQ=y -CONFIG_BLK_DEV_IDE_TCQ_DEFAULT=y -CONFIG_BLK_DEV_IDE_TCQ_DEPTH=8 -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -CONFIG_BLK_DEV_ADMA=y -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -CONFIG_BLK_DEV_HPT34X=y -CONFIG_BLK_DEV_HPT366=y -# CONFIG_BLK_DEV_SC1200 is not set -CONFIG_BLK_DEV_PIIX=y -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_PDC202XX_OLD=y -CONFIG_BLK_DEV_PDC202XX_NEW=y -CONFIG_PDC202XX_FORCE=y -# CONFIG_BLK_DEV_RZ1000 is not set -# CONFIG_BLK_DEV_SVWKS is not set -CONFIG_BLK_DEV_SIIMAGE=m -CONFIG_BLK_DEV_SIS5513=y -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_BLK_DEV_PDC202XX=y -CONFIG_BLK_DEV_IDE_MODES=y - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_XFRM_USER is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IPV6_SCTP__=y -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_LLC is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_HAPPYMEAL=m -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -CONFIG_ULTRA=m -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m - -# -# Tulip family network device support -# -CONFIG_NET_TULIP=y -CONFIG_DE2104X=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_WINBOND_840=m -CONFIG_DM9102=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_ZNET=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_AMD8111_ETH=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_B44=m -CONFIG_CS89x0=m -CONFIG_DGRS=m -CONFIG_EEPRO100=m -CONFIG_E100=m -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -CONFIG_E1000_NAPI=y -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_R8169=m -CONFIG_SK98LIN=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m - -# -# Wireless ISA/PCI cards support -# -CONFIG_WAVELAN=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices (depends on LLC=y) -# -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN_BOOL is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -CONFIG_MOUSE_SERIAL=y -CONFIG_MOUSE_INPORT=y -CONFIG_MOUSE_ATIXL=y -CONFIG_MOUSE_LOGIBM=y -CONFIG_MOUSE_PC110PAD=y -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_EXTENDED=y -# CONFIG_SERIAL_8250_MANY_PORTS is not set -CONFIG_SERIAL_8250_SHARE_IRQ=y -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set -# CONFIG_SERIAL_8250_RSA is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=m -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# I2C Hardware Sensors Mainboard support -# - -# -# I2C Hardware Sensors Chip support -# - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -# CONFIG_AGP3 is not set -# CONFIG_AGP_INTEL is not set -# CONFIG_AGP_VIA is not set -# CONFIG_AGP_AMD is not set -# CONFIG_AGP_SIS is not set -# CONFIG_AGP_ALI is not set -# CONFIG_AGP_SWORKS is not set -# CONFIG_AGP_AMD_8151 is not set -# CONFIG_DRM is not set -# CONFIG_MWAVE is not set -# CONFIG_RAW_DRIVER is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -CONFIG_QUOTACTL=y -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_HUGETLBFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -# CONFIG_ROMFS_FS is not set -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=m -CONFIG_XFS_RT=y -CONFIG_XFS_QUOTA=y -CONFIG_XFS_POSIX_ACL=y - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_EXPORTFS is not set -# CONFIG_CIFS is not set -# CONFIG_SMB_FS is not set -# CONFIG_NCP_FS is not set -# CONFIG_AFS_FS is not set -CONFIG_ZISOFS_FS=y -CONFIG_FS_MBCACHE=y -CONFIG_FS_POSIX_ACL=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Graphics support -# -# CONFIG_FB is not set -# CONFIG_VIDEO_SELECT is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_MDA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_UHCI_HCD=y - -# -# USB Device Class drivers -# -CONFIG_USB_BLUETOOTH_TTY=m -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set - -# -# SCSI support is needed for USB Storage -# - -# -# USB Human Interface Devices (HID) -# -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_XPAD is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network adaptors -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_CDCETHER is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set - -# -# USB port drivers -# -# CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_TIGL is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_BRLVGER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_TEST is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -CONFIG_CPUS_STAT=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_X86_REMOTE_DEBUG is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -CONFIG_KALLSYMS=y -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_FRAME_POINTER is not set -CONFIG_X86_EXTRA_IRQS=y -CONFIG_X86_FIND_SMP_CONFIG=y -CONFIG_X86_MPPARSE=y - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_CRC32=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_X86_SMP=y -CONFIG_X86_HT=y -CONFIG_X86_BIOS_REBOOT=y -CONFIG_X86_TRAMPOLINE=y diff --git a/src/livecd/profiles/gentoo-basic/kernel-config-20020111 b/src/livecd/profiles/gentoo-basic/kernel-config-20020111 deleted file mode 100644 index 5ff4e30ecc..0000000000 --- a/src/livecd/profiles/gentoo-basic/kernel-config-20020111 +++ /dev/null @@ -1,1295 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -CONFIG_ISA=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -# CONFIG_M68631 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_MCE is not set -CONFIG_JIFFIES=100 -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_1GB is not set -CONFIG_2GB=y -# CONFIG_3GB is not set -# CONFIG_05GB is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -CONFIG_SMP=y -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_TIMES is not set -# CONFIG_MULTIQUAD is not set - -# -# VIA Chipset Fixes -# -CONFIG_VIA_OOPS_FIXUP=y -CONFIG_VIA_NORTHBRIDGE_FIXUP=y - -# -# General setup -# -CONFIG_NET=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -# CONFIG_PCMCIA is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_IBM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_MAX_USER_RT_PRIO=100 -CONFIG_MAX_RT_PRIO=0 -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -# CONFIG_PM is not set -# CONFIG_APM is not set - -# -# ACPI Support -# -CONFIG_ACPI=y -# CONFIG_ACPI_HT_ONLY is not set -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=y -CONFIG_ACPI_BATTERY=y -CONFIG_ACPI_BUTTON=y -CONFIG_ACPI_FAN=y -CONFIG_ACPI_PROCESSOR=y -CONFIG_ACPI_THERMAL=y -CONFIG_ACPI_TOSHIBA=y -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=y -CONFIG_EVMS_LOCAL_DEV_MGR=y -CONFIG_EVMS_DOS_SEGMENT_MGR=y -CONFIG_EVMS_GPT_SEGMENT_MGR=y -CONFIG_EVMS_SNAPSHOT=y -CONFIG_EVMS_DRIVELINK=y -CONFIG_EVMS_BBR=y -CONFIG_EVMS_LVM=y -CONFIG_EVMS_MD=y -CONFIG_EVMS_MD_LINEAR=y -CONFIG_EVMS_MD_RAID0=y -CONFIG_EVMS_MD_RAID1=y -CONFIG_EVMS_MD_RAID5=y -CONFIG_EVMS_AIX=y -CONFIG_EVMS_OS2=y -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -# CONFIG_MD_LINEAR is not set -# CONFIG_MD_RAID0 is not set -# CONFIG_MD_RAID1 is not set -# CONFIG_MD_RAID5 is not set -# CONFIG_MD_MULTIPATH is not set -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -# CONFIG_CRYPTO is not set -# CONFIG_CIPHERS is not set -# CONFIG_DIGESTS is not set -# CONFIG_CRYPTODEV is not set -# CONFIG_CRYPTOLOOP is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -# CONFIG_IP_NF_H323 is not set -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_QUOTA=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_MPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_TIME=m -CONFIG_IP_NF_MATCH_RANDOM=m -CONFIG_IP_NF_MATCH_PSD=m -CONFIG_IP_NF_MATCH_NTH=m -CONFIG_IP_NF_MATCH_IPV4OPTIONS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_STEALTH=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_IPLIMIT=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_NETLINK=m -CONFIG_IP_NF_TARGET_IPV4OPTSSTRIP=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_IPSEC=m -# CONFIG_IPSEC_IPIP is not set -# CONFIG_IPSEC_AH is not set -# CONFIG_IPSEC_ESP is not set -# CONFIG_IPSEC_IPCOMP is not set -# CONFIG_IPSEC_DEBUG is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_TASKFILE_IO=y -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_CMD680=y -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -CONFIG_PDC202XX_BURST=y -CONFIG_PDC202XX_FORCE=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -CONFIG_SCSI_SYM53C8XX=m -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_NET_RANDOM is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -CONFIG_TC35815=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -# CONFIG_NATSEMI_CABLE_MAGIC is not set -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_NEW_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -CONFIG_TLAN=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -CONFIG_TMS380TR=m -CONFIG_TMSPCI=m -CONFIG_TMSISA=m -CONFIG_ABYSS=m -# CONFIG_MADGEMC is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -# CONFIG_COMPUTONE is not set -# CONFIG_ROCKETPORT is not set -# CONFIG_CYCLADES is not set -# CONFIG_DIGIEPCA is not set -# CONFIG_DIGI is not set -# CONFIG_ESPSERIAL is not set -# CONFIG_MOXA_INTELLIO is not set -# CONFIG_MOXA_SMARTIO is not set -# CONFIG_ISI is not set -# CONFIG_SYNCLINK is not set -CONFIG_N_HDLC=m -# CONFIG_RISCOM8 is not set -# CONFIG_SPECIALIX is not set -# CONFIG_SX is not set -# CONFIG_RIO is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -CONFIG_MWAVE=m - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -CONFIG_FS_POSIX_ACL=y -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_SUPERMOUNT is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_XATTR_SHARING=y -CONFIG_EXT3_FS_XATTR_USER=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_POSIX_ACL is not set -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -# CONFIG_ROMFS_FS is not set -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_XATTR_SHARING=y -CONFIG_EXT2_FS_XATTR_USER=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=m -CONFIG_XFS_RT=y -CONFIG_XFS_QUOTA=y -CONFIG_XFS_DMAPI=y -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_ROOT_NFS is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -CONFIG_NFSD_TCP=y -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y -CONFIG_ZLIB_FS_INFLATE=y -CONFIG_FS_MBCACHE=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -# CONFIG_IMON is not set - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=y -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=y -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USBDNET=m -CONFIG_USB_USBDNET_VENDOR=0000 -CONFIG_USB_USBDNET_PRODUCT=0000 -CONFIG_USB_USBDNET_CLASS=0000 -CONFIG_USB_USBDNET_SUBCLASS=0000 -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_SERIAL_GENERIC is not set -# CONFIG_USB_SERIAL_BELKIN is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_EMPEG is not set -# CONFIG_USB_SERIAL_FTDI_SIO is not set -# CONFIG_USB_SERIAL_VISOR is not set -# CONFIG_USB_SERIAL_IPAQ is not set -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -# CONFIG_USB_SERIAL_KEYSPAN is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_PL2303 is not set -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_SERIAL_OMNINET is not set -# CONFIG_USB_SERIAL_SAFE is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_BRLVGER=m - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set - -# -# Grsecurity -# -# CONFIG_GRKERNSEC is not set diff --git a/src/livecd/profiles/gentoo-basic/kernel-config-20030111 b/src/livecd/profiles/gentoo-basic/kernel-config-20030111 deleted file mode 100644 index 5ff4e30ecc..0000000000 --- a/src/livecd/profiles/gentoo-basic/kernel-config-20030111 +++ /dev/null @@ -1,1295 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -CONFIG_ISA=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -# CONFIG_M68631 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_MCE is not set -CONFIG_JIFFIES=100 -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_1GB is not set -CONFIG_2GB=y -# CONFIG_3GB is not set -# CONFIG_05GB is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -CONFIG_SMP=y -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_TIMES is not set -# CONFIG_MULTIQUAD is not set - -# -# VIA Chipset Fixes -# -CONFIG_VIA_OOPS_FIXUP=y -CONFIG_VIA_NORTHBRIDGE_FIXUP=y - -# -# General setup -# -CONFIG_NET=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -# CONFIG_PCMCIA is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_IBM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_MAX_USER_RT_PRIO=100 -CONFIG_MAX_RT_PRIO=0 -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -# CONFIG_PM is not set -# CONFIG_APM is not set - -# -# ACPI Support -# -CONFIG_ACPI=y -# CONFIG_ACPI_HT_ONLY is not set -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=y -CONFIG_ACPI_BATTERY=y -CONFIG_ACPI_BUTTON=y -CONFIG_ACPI_FAN=y -CONFIG_ACPI_PROCESSOR=y -CONFIG_ACPI_THERMAL=y -CONFIG_ACPI_TOSHIBA=y -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=y -CONFIG_EVMS_LOCAL_DEV_MGR=y -CONFIG_EVMS_DOS_SEGMENT_MGR=y -CONFIG_EVMS_GPT_SEGMENT_MGR=y -CONFIG_EVMS_SNAPSHOT=y -CONFIG_EVMS_DRIVELINK=y -CONFIG_EVMS_BBR=y -CONFIG_EVMS_LVM=y -CONFIG_EVMS_MD=y -CONFIG_EVMS_MD_LINEAR=y -CONFIG_EVMS_MD_RAID0=y -CONFIG_EVMS_MD_RAID1=y -CONFIG_EVMS_MD_RAID5=y -CONFIG_EVMS_AIX=y -CONFIG_EVMS_OS2=y -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -# CONFIG_MD_LINEAR is not set -# CONFIG_MD_RAID0 is not set -# CONFIG_MD_RAID1 is not set -# CONFIG_MD_RAID5 is not set -# CONFIG_MD_MULTIPATH is not set -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -# CONFIG_CRYPTO is not set -# CONFIG_CIPHERS is not set -# CONFIG_DIGESTS is not set -# CONFIG_CRYPTODEV is not set -# CONFIG_CRYPTOLOOP is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -# CONFIG_IP_NF_H323 is not set -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_QUOTA=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_MPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_TIME=m -CONFIG_IP_NF_MATCH_RANDOM=m -CONFIG_IP_NF_MATCH_PSD=m -CONFIG_IP_NF_MATCH_NTH=m -CONFIG_IP_NF_MATCH_IPV4OPTIONS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_STEALTH=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_IPLIMIT=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_NETLINK=m -CONFIG_IP_NF_TARGET_IPV4OPTSSTRIP=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_IPSEC=m -# CONFIG_IPSEC_IPIP is not set -# CONFIG_IPSEC_AH is not set -# CONFIG_IPSEC_ESP is not set -# CONFIG_IPSEC_IPCOMP is not set -# CONFIG_IPSEC_DEBUG is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_TASKFILE_IO=y -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_CMD680=y -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -CONFIG_PDC202XX_BURST=y -CONFIG_PDC202XX_FORCE=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -CONFIG_SCSI_SYM53C8XX=m -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_NET_RANDOM is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -CONFIG_TC35815=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -# CONFIG_NATSEMI_CABLE_MAGIC is not set -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_NEW_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -CONFIG_TLAN=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -CONFIG_TMS380TR=m -CONFIG_TMSPCI=m -CONFIG_TMSISA=m -CONFIG_ABYSS=m -# CONFIG_MADGEMC is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -# CONFIG_COMPUTONE is not set -# CONFIG_ROCKETPORT is not set -# CONFIG_CYCLADES is not set -# CONFIG_DIGIEPCA is not set -# CONFIG_DIGI is not set -# CONFIG_ESPSERIAL is not set -# CONFIG_MOXA_INTELLIO is not set -# CONFIG_MOXA_SMARTIO is not set -# CONFIG_ISI is not set -# CONFIG_SYNCLINK is not set -CONFIG_N_HDLC=m -# CONFIG_RISCOM8 is not set -# CONFIG_SPECIALIX is not set -# CONFIG_SX is not set -# CONFIG_RIO is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -CONFIG_MWAVE=m - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -CONFIG_FS_POSIX_ACL=y -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_SUPERMOUNT is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_XATTR_SHARING=y -CONFIG_EXT3_FS_XATTR_USER=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_POSIX_ACL is not set -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -# CONFIG_ROMFS_FS is not set -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_XATTR_SHARING=y -CONFIG_EXT2_FS_XATTR_USER=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=m -CONFIG_XFS_RT=y -CONFIG_XFS_QUOTA=y -CONFIG_XFS_DMAPI=y -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_ROOT_NFS is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -CONFIG_NFSD_TCP=y -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y -CONFIG_ZLIB_FS_INFLATE=y -CONFIG_FS_MBCACHE=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -# CONFIG_IMON is not set - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=y -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=y -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USBDNET=m -CONFIG_USB_USBDNET_VENDOR=0000 -CONFIG_USB_USBDNET_PRODUCT=0000 -CONFIG_USB_USBDNET_CLASS=0000 -CONFIG_USB_USBDNET_SUBCLASS=0000 -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_SERIAL_GENERIC is not set -# CONFIG_USB_SERIAL_BELKIN is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_EMPEG is not set -# CONFIG_USB_SERIAL_FTDI_SIO is not set -# CONFIG_USB_SERIAL_VISOR is not set -# CONFIG_USB_SERIAL_IPAQ is not set -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -# CONFIG_USB_SERIAL_KEYSPAN is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_PL2303 is not set -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_SERIAL_OMNINET is not set -# CONFIG_USB_SERIAL_SAFE is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_BRLVGER=m - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set - -# -# Grsecurity -# -# CONFIG_GRKERNSEC is not set diff --git a/src/livecd/profiles/gentoo-basic/mjc-config b/src/livecd/profiles/gentoo-basic/mjc-config deleted file mode 100644 index 2d1c976aaf..0000000000 --- a/src/livecd/profiles/gentoo-basic/mjc-config +++ /dev/null @@ -1,1344 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -# CONFIG_M68631 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -CONFIG_1GB=y -# CONFIG_2GB is not set -# CONFIG_3GB is not set -# CONFIG_05GB is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -CONFIG_SMP=y -# CONFIG_MULTIQUAD is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -# CONFIG_HOTPLUG is not set -# CONFIG_PCMCIA is not set -# CONFIG_HOTPLUG_PCI is not set -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -# CONFIG_PM is not set -# CONFIG_APM is not set - -# -# ACPI Support -# -# CONFIG_ACPI is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -CONFIG_EVMS_GPT_SEGMENT_MGR=m -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -CONFIG_EVMS_OS2=m -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -# CONFIG_MD_LINEAR is not set -# CONFIG_MD_RAID0 is not set -# CONFIG_MD_RAID1 is not set -# CONFIG_MD_RAID5 is not set -# CONFIG_MD_MULTIPATH is not set -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -CONFIG_CRYPTO=m -CONFIG_CIPHERS=y -CONFIG_CIPHER_AES=m -CONFIG_CIPHER_MARS=m -CONFIG_CIPHER_RC6=m -CONFIG_CIPHER_SERPENT=m -CONFIG_CIPHER_TWOFISH=m -CONFIG_CIPHER_3DES=m -CONFIG_CIPHER_BLOWFISH=m -CONFIG_CIPHER_CAST5=m -CONFIG_CIPHER_GOST=m -CONFIG_CIPHER_IDEA=m -CONFIG_CIPHER_RC5=m -# CONFIG_CIPHER_NULL is not set -# CONFIG_CIPHER_DES is not set -# CONFIG_CIPHER_DFC is not set -# CONFIG_CIPHER_BLOWFISH_OLD is not set -CONFIG_DIGESTS=y -CONFIG_DIGEST_MD5=m -CONFIG_DIGEST_SHA1=m -CONFIG_DIGEST_RIPEMD160=m -CONFIG_DIGEST_SHA256=m -CONFIG_DIGEST_SHA384=m -CONFIG_DIGEST_SHA512=m -CONFIG_CRYPTODEV=y -CONFIG_CRYPTOLOOP=m -CONFIG_CRYPTOLOOP_ATOMIC=y -CONFIG_CRYPTOLOOP_IV_HACK=y -CONFIG_CRYPTOLOOP_DEBUG=y -# CONFIG_IPSEC_TUNNEL is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=m -# CONFIG_NETFILTER is not set -CONFIG_FILTER=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_IPV6=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_IPX is not set -CONFIG_ATALK=m - -# -# Appletalk devices -# -CONFIG_DEV_APPLETALK=y -CONFIG_LTPC=m -CONFIG_COPS=m -CONFIG_COPS_DAYNA=y -CONFIG_COPS_TANGENT=y -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_IPDDP_DECAP=y -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -CONFIG_IDE_TASK_IOCTL=y -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -CONFIG_AEC62XX_TUNING=y -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_CMD680=y -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_PIIX_TUNING=y -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -CONFIG_PDC202XX_BURST=y -CONFIG_PDC202XX_FORCE=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -CONFIG_IDEDMA_IVB=y -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -CONFIG_SCSI_SYM53C8XX=m -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -# CONFIG_SCSI_DC395x_TRMS1040 is not set -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=y -CONFIG_IEEE1394_OHCI1394=m -# CONFIG_IEEE1394_VIDEO1394 is not set -CONFIG_IEEE1394_SBP2=y -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -# CONFIG_IEEE1394_DV1394 is not set -CONFIG_IEEE1394_RAWIO=m -CONFIG_IEEE1394_CMP=m -CONFIG_IEEE1394_AMDTP=m -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -CONFIG_I2O=m -CONFIG_I2O_PCI=m -CONFIG_I2O_BLOCK=m -CONFIG_I2O_LAN=m -CONFIG_I2O_SCSI=m -CONFIG_I2O_PROC=m - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -CONFIG_BONDING=m -CONFIG_EQUALIZER=m -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -# CONFIG_SUNGEM is not set -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -CONFIG_TMS380TR=m -CONFIG_TMSPCI=m -CONFIG_TMSISA=m -CONFIG_ABYSS=m -# CONFIG_MADGEMC is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# -CONFIG_IRTTY_SIR=m -CONFIG_IRPORT_SIR=m -CONFIG_DONGLE=y -CONFIG_ESI_DONGLE=m -CONFIG_ACTISYS_DONGLE=m -CONFIG_TEKRAM_DONGLE=m -CONFIG_GIRBIL_DONGLE=m -CONFIG_LITELINK_DONGLE=m -CONFIG_MCP2120_DONGLE=m -CONFIG_OLD_BELKIN_DONGLE=m -CONFIG_ACT200L_DONGLE=m -CONFIG_MA600_DONGLE=m -CONFIG_USB_IRDA=m -CONFIG_NSC_FIR=m -CONFIG_WINBOND_FIR=m -CONFIG_TOSHIBA_FIR=m -CONFIG_SMC_IRCC_FIR=m -CONFIG_ALI_FIR=m -CONFIG_VLSI_FIR=m - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -CONFIG_ISDN_AUDIO=y -CONFIG_ISDN_TTY_FAX=y - -# -# ISDN feature submodules -# -CONFIG_ISDN_DRV_LOOP=m -CONFIG_ISDN_DIVERSION=m - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -CONFIG_ISDN_DRV_EICON_OLD=m -CONFIG_ISDN_DRV_EICON_PCI=y -CONFIG_ISDN_DRV_EICON_ISA=y -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -CONFIG_INPUT_EVDEV=m - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -# CONFIG_CYZ_INTR is not set -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -# CONFIG_SPECIALIX_RTSCTS is not set -CONFIG_SX=m -CONFIG_RIO=m -CONFIG_RIO_OLDPCI=y -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set -CONFIG_ACQUIRE_WDT=m -CONFIG_ADVANTECH_WDT=m -CONFIG_ALIM7101_WDT=m -CONFIG_SC520_WDT=m -CONFIG_PCWATCHDOG=m -CONFIG_EUROTECH_WDT=m -CONFIG_IB700_WDT=m -CONFIG_WAFER_WDT=m -CONFIG_I810_TCO=m -CONFIG_MIXCOMWD=m -CONFIG_60XX_WDT=m -CONFIG_SC1200_WDT=m -CONFIG_SOFT_WATCHDOG=m -CONFIG_W83877F_WDT=m -CONFIG_WDT=m -CONFIG_WDTPCI=m -CONFIG_WDT_501=y -CONFIG_WDT_501_FAN=y -CONFIG_MACHZ_WDT=m -CONFIG_AMD7XX_TCO=m -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -CONFIG_AMD_PM768=m -CONFIG_NVRAM=m -CONFIG_RTC=m -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -CONFIG_SONYPI=m - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -CONFIG_MWAVE=m - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -CONFIG_QUOTA=y -CONFIG_QFMT_V1=m -CONFIG_QFMT_V2=m -CONFIG_QIFACE_COMPAT=y -CONFIG_QIFACE_V1=y -# CONFIG_QIFACE_V2 is not set -# CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -CONFIG_REISERFS_PROC_INFO=y -# CONFIG_ADFS_FS is not set -# CONFIG_ADFS_FS_RW is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -CONFIG_JFS_STATISTICS=y -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -CONFIG_DEVPTS_FS=y -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -# CONFIG_ROMFS_FS is not set -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=m -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -CONFIG_XFS_QUOTA=y -CONFIG_XFS_DMAPI=y -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -CONFIG_NFSD=m -# CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_IMON=m -CONFIG_EXECOUNT=y - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -CONFIG_VIDEO_SELECT=y -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -CONFIG_FB=y -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FB_LOGO_TUX is not set -# CONFIG_FB_LOGO_LARRY is not set -# CONFIG_FB_LOGO_GENTOO is not set -CONFIG_FB_LOGO_G=y -# CONFIG_FB_LOGO_PENGUIN is not set -# CONFIG_FB_LOGO_POWEREDBY is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_CLGEN is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_VESA=y -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_HGA is not set -CONFIG_VIDEO_SELECT=y -# CONFIG_FB_MATROX is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set -# CONFIG_FBCON_ADVANCED is not set -CONFIG_FBCON_CFB8=y -CONFIG_FBCON_CFB16=y -CONFIG_FBCON_CFB24=y -CONFIG_FBCON_CFB32=y -# CONFIG_FBCON_FONTWIDTH8_ONLY is not set -# CONFIG_FBCON_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_SOUND_ALI5455=m -CONFIG_SOUND_BT878=m -CONFIG_SOUND_CMPCI=m -CONFIG_SOUND_CMPCI_FM=y -CONFIG_SOUND_CMPCI_FMIO=388 -CONFIG_SOUND_CMPCI_FMIO=388 -CONFIG_SOUND_CMPCI_MIDI=y -CONFIG_SOUND_CMPCI_MPUIO=330 -CONFIG_SOUND_CMPCI_JOYSTICK=y -CONFIG_SOUND_CMPCI_CM8738=y -# CONFIG_SOUND_CMPCI_SPDIFINVERSE is not set -# CONFIG_SOUND_CMPCI_SPDIFLOOP is not set -CONFIG_SOUND_CMPCI_SPEAKERS=2 -CONFIG_SOUND_EMU10K1=m -CONFIG_MIDI_EMU10K1=y -CONFIG_SOUND_FUSION=m -CONFIG_SOUND_CS4281=m -CONFIG_SOUND_ES1370=m -CONFIG_SOUND_ES1371=m -CONFIG_SOUND_ESSSOLO1=m -CONFIG_SOUND_MAESTRO=m -CONFIG_SOUND_MAESTRO3=m -CONFIG_SOUND_FORTE=m -CONFIG_SOUND_ICH=m -CONFIG_SOUND_RME96XX=m -CONFIG_SOUND_SONICVIBES=m -CONFIG_SOUND_TRIDENT=m -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -CONFIG_SOUND_VIA82CXXX=m -CONFIG_MIDI_VIA82CXXX=y -CONFIG_SOUND_OSS=m -# CONFIG_SOUND_TRACEINIT is not set -# CONFIG_SOUND_DMAP is not set -CONFIG_SOUND_AD1816=m -CONFIG_SOUND_SGALAXY=m -CONFIG_SOUND_ADLIB=m -CONFIG_SOUND_ACI_MIXER=m -CONFIG_SOUND_CS4232=m -CONFIG_SOUND_SSCAPE=m -CONFIG_SOUND_GUS=m -# CONFIG_SOUND_GUS16 is not set -# CONFIG_SOUND_GUSMAX is not set -CONFIG_SOUND_VMIDI=m -CONFIG_SOUND_TRIX=m -CONFIG_SOUND_MSS=m -CONFIG_SOUND_MPU401=m -CONFIG_SOUND_NM256=m -CONFIG_SOUND_MAD16=m -# CONFIG_MAD16_OLDCARD is not set -CONFIG_SOUND_PAS=m -# CONFIG_PAS_JOYSTICK is not set -CONFIG_SOUND_PSS=m -# CONFIG_PSS_MIXER is not set -# CONFIG_PSS_HAVE_BOOT is not set -CONFIG_SOUND_SB=m -CONFIG_SOUND_AWE32_SYNTH=m -CONFIG_SOUND_WAVEFRONT=m -CONFIG_SOUND_MAUI=m -CONFIG_SOUND_YM3812=m -CONFIG_SOUND_OPL3SA1=m -CONFIG_SOUND_OPL3SA2=m -CONFIG_SOUND_YMFPCI=m -CONFIG_SOUND_YMFPCI_LEGACY=y -CONFIG_SOUND_UART6850=m -CONFIG_SOUND_AEDSP16=m -# CONFIG_SC6600 is not set -# CONFIG_AEDSP16_SBPRO is not set -# CONFIG_AEDSP16_MSS is not set -# CONFIG_AEDSP16_MPU401 is not set -# CONFIG_SOUND_TVMIXER is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=y -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=y -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -CONFIG_USB_MIDI=m -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -CONFIG_USB_HIDDEV=y -CONFIG_USB_AIPTEK=m -CONFIG_USB_WACOM=m -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -# CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -CONFIG_USB_LCD=m - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Windows Applications support -# -# CONFIG_MKI is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/gentoo-basic/motd b/src/livecd/profiles/gentoo-basic/motd deleted file mode 100644 index 56aaec836b..0000000000 --- a/src/livecd/profiles/gentoo-basic/motd +++ /dev/null @@ -1,20 +0,0 @@ - -Welcome to the Gentoo Linux LiveCD! - -The root password on this system has been auto-scrambled for security. - -Type "dhcpcd eth0" (or similar) to auto-configure eth0. -Type "net-setup eth0" to specify eth0 IP address settings by hand. - -To start an ssh server on this system, type "/etc/init.d/sshd start". -If you need to log in remotely as root, type "passwd root" to reset -root's password to a known value. - -Stage tarball(s) and packages can be found in /mnt/cdrom/gentoo. View -installation instructions by typing "less /install.txt" or "lynx -http://www.gentoo.org/doc/en/gentoo-x86-install.xml". - -Please report any bugs you find to http://bugs.gentoo.org. Be sure to -include detailed information about how to reproduce the bug you are -reporting. Thanks for using Gentoo Linux! - diff --git a/src/livecd/profiles/gentoo-basic/settings b/src/livecd/profiles/gentoo-basic/settings deleted file mode 100644 index 4b8ac4767a..0000000000 --- a/src/livecd/profiles/gentoo-basic/settings +++ /dev/null @@ -1,17 +0,0 @@ -source ${LIVECD_ROOT}/profiles/global/settings -CD_BUILDROOT=${CD_TEMPROOT}/${CD_PROFILE} -CD_PORTAGE_PROFILE="default-x86-1.4" -CD_USE="xfs acpi4linux crypt ipv6 -slang -X -gtk -arts -svga -directfb -ggi -esd -nas -perl -python" -CD_CFLAGS="-O3 -mcpu=i686 -pipe" -CD_CXXFLAGS="${CD_CFLAGS}" -#CD_STAGETARBALL=http://www.ibiblio.org/gentoo/releases/1.4_rc1/x86/stage3-i586-1.4_rc1.tar.bz2 -CD_STAGETARBALL=http://www.ibiblio.org/gentoo/experimental/x86/stages/stage3-x86-1.4_pre20030110.tar.bz2 -#modules to auto-detect/copy to the initrd (put in the "/modules/storage" directory) -#aic7xxx_old removed from position after aic7xxx in attempt to fix bugs #12185 and #11278 -STORAGE_MODULES="aic79xx aic7xxx BusLogic ncr53c8xx \ -NCR53c406a initio advansys aha1740 aha1542 aha152x \ -atp870u dtc eata fdomain gdth megaraid pas16 pci2220i \ -pci2000 psi240i qlogicfas qlogicfc qlogicisp seagate \ -t128 tmscsim u14-34f ultrastor wd7000 dc395x_trm" -LOOP_SIZE="80000" -KERNCONFIG=kernel-config-2.4.20_pre4-pcmcia diff --git a/src/livecd/profiles/gentoo-basic/stage1-experimental b/src/livecd/profiles/gentoo-basic/stage1-experimental deleted file mode 100644 index ed4548f10c..0000000000 --- a/src/livecd/profiles/gentoo-basic/stage1-experimental +++ /dev/null @@ -1,2 +0,0 @@ -=sys-kernel/xfs-sources-2.4.20_pre4 -sys-apps/partimage diff --git a/src/livecd/profiles/gentoo-basic/stage1-packages b/src/livecd/profiles/gentoo-basic/stage1-packages deleted file mode 100644 index 5f320f46fb..0000000000 --- a/src/livecd/profiles/gentoo-basic/stage1-packages +++ /dev/null @@ -1,31 +0,0 @@ -metalog -ncftp -dialog -lilo -grub -nvi -parted -app-arch/mt-st -sys-apps/star -dev-util/strace -sys-apps/pciutils -net-dialup/wvdial -net-www/lynx -sys-apps/raidtools -sys-apps/e2fsprogs -sys-apps/reiserfs-utils -sys-apps/hdparm -app-editors/nano -sys-apps/less -net-misc/openssh -net-misc/dhcpcd -sys-apps/lvm-user -net-fs/nfs-utils -net-irc/irssi -jfsutils -speedtouch -gpm -dosfstools -mingetty -pwgen -ucl diff --git a/src/livecd/profiles/gentoo-basic/stage2-packages b/src/livecd/profiles/gentoo-basic/stage2-packages deleted file mode 100644 index 5450990178..0000000000 --- a/src/livecd/profiles/gentoo-basic/stage2-packages +++ /dev/null @@ -1,13 +0,0 @@ -net-wireless/wireless-tools -sys-apps/iproute -sys-apps/pcmcia-cs -net-dialup/ppp -net-dialup/rp-pppoe -isdn4k-utils -net-misc/nforce-net -#net-misc/e100 -#net-misc/e1000 -kpnadsl4linux -pptpclient -linux-wlan-ng -iputils diff --git a/src/livecd/profiles/global/XF86Config.master b/src/livecd/profiles/global/XF86Config.master deleted file mode 100644 index b366b6db3c..0000000000 --- a/src/livecd/profiles/global/XF86Config.master +++ /dev/null @@ -1,107 +0,0 @@ -Section "ServerLayout" - Identifier "XFree86 Configured" - Screen 0 "Screen0" 0 0 - InputDevice "Mouse0" "CorePointer" - InputDevice "Keyboard0" "CoreKeyboard" -EndSection - -Section "Files" - RgbPath "/usr/X11R6/lib/X11/rgb" - ModulePath "/usr/X11R6/lib/modules" - FontPath "/usr/X11R6/lib/X11/fonts/misc/" - FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" - FontPath "/usr/X11R6/lib/X11/fonts/Type1/" - FontPath "/usr/X11R6/lib/X11/fonts/CID/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" -EndSection - -Section "Module" - Load "dbe" -# Load "dri" - Load "extmod" - Load "glx" - Load "record" - Load "xtrap" - Load "speedo" - Load "type1" -EndSection - -Section "InputDevice" - Identifier "Keyboard0" - Driver "keyboard" -EndSection - -Section "InputDevice" - Identifier "Mouse0" - Driver "mouse" - Option "Protocol" "##MOUSEPROTO##" - Option "Device" "##MOUSEDEV##" -EndSection - -Section "Monitor" - Identifier "Monitor0" - VendorName "Monitor Vendor" - ModelName "Monitor Model" - HorizSync ##HORIZSYNC## - VertRefresh ##VERTREFRESH## -EndSection - -Section "Device" - ### Available Driver options are:- - ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", - ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" - ### [arg]: arg optional - #Option "DigitalVibrance" # <i> - #Option "PageFlip" # [<bool>] - #Option "Dac8Bit" # [<bool>] - #Option "NoLogo" # [<bool>] - #Option "Overlay" # [<bool>] - #Option "UBB" # [<bool>] - #Option "Stereo" # [<bool>] - #Option "BlueLine" # [<bool>] - #Option "WindowFlip" # [<bool>] - #Option "SWcursor" # [<bool>] - #Option "HWcursor" # [<bool>] - #Option "VideoKey" # <i> - #Option "NvAGP" # <i> - #Option "PixmapCacheLines" # <i> - #Option "IgnoreEDID" # [<bool>] - #Option "NoDDC" # [<bool>] - #Option "ConnectedMonitor" # <str> - #Option "ConnectedMonitors" # <str> - #Option "TVStandard" # <str> - #Option "TVOutFormat" # <str> - #Option "NoRenderAccel" # [<bool>] - Option "CursorShadow" "1" # [<bool>] - #Option "CursorShadowAlpha" # <i> - #Option "CursorShadowXOffset" # <i> - #Option "CursorShadowYOffset" # <i> - #Option "UseEdidFreqs" # [<bool>] - #Option "FlatPanelProperties" # <str> - #Option "TwinView" # [<bool>] - #Option "TwinViewOrientation" # <str> - #Option "SecondMonitorHorizSync" # <str> - #Option "SecondMonitorVertRefresh" # <str> - #Option "MetaModes" # <str> - #Option "UseInt10Module" # [<bool>] - #Option "SwapReady" # [<bool>] - #Option "NoTwinViewXineramaInfo" # [<bool>] - #Option "NoRenderExtension" # [<bool>] - Identifier "Card0" - Driver "nvidia" - VendorName "NVidia" -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Card0" - Monitor "Monitor0" - DefaultColorDepth 24 - SubSection "Display" - Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" "512x384" - Depth 24 - ViewPort 0 0 - EndSubSection -EndSection - diff --git a/src/livecd/profiles/global/aux-files/checkroot b/src/livecd/profiles/global/aux-files/checkroot deleted file mode 100644 index 20812b0890..0000000000 --- a/src/livecd/profiles/global/aux-files/checkroot +++ /dev/null @@ -1,87 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/global/aux-files/Attic/checkroot,v 1.1 2003/10/19 03:10:52 livewire Exp $ - - -depend() { - before * -} - -start() { - if [ ! -f /fastboot ] - then - ebegin "Remounting root filesystem read-only (if necessary)" - mount / -n -o remount,ro &>/dev/null - eend $? - - ebegin "Checking root filesystem" - if [ -f /forcefsck ] - then - ewarn "A full fsck has been forced" - ewarn "Skipping fsck; this is a livecd" -# fsck -C -f -a / - # /forcefsck isn't deleted because checkfs needs it. - # it'll be deleted in that script. - fi - if [ "$?" -eq 0 ] - then - eend 0 - elif [ "$?" -eq 1 ] - then - ewend 1 "Filesystem repaired" - else - eend 2 "Filesystem couldn't be fixed :(" - /sbin/sulogin ${CONSOLE} - /sbin/reboot -f - fi - fi - - ebegin "Remounting root filesystem read/write" - mount / -n -o remount,rw &>/dev/null - if [ "$?" -ne 0 ] - then - eend 2 "Root filesystem could not be mounted R/W :(" - /sbin/sulogin ${CONSOLE} - else - eend 0 - fi - - if [ "${BOOT}" = "yes" ] - then - # create /etc/mtab (done by forcing current mounted filesystems) - # NB: this needs to be updated if our /sbin/rc mounts change ... - > /etc/mtab - mount -f -o rw / &> /dev/null - mount -f /proc &> /dev/null - - # Remove stale backups - rm -f /etc/mtab~ /etc/mtab~~ - - # should /dev be mounted ? - if ! get_bootparam "nodevfs" && [ -e /dev/.devfsd ] - then - mount -f -t devfs none /dev &> /dev/null - fi - - # should we mount a ramdisk or tmpfs? - if ! get_bootparam "notmpfs" - then - # using tmpfs - mount -f -t tmpfs tmpfs ${svcdir} \ - -o rw,mode=0644,size=${svcsize}k &> /dev/null - else - # using a ramdisk - mount -f -t ext2 /dev/ram0 ${svcdir} -o rw &> /dev/null - fi - - if ! get_bootparam "notmpfs" && get_bootparam "ngpt" - then - # POSIX shared memory support - mount -f /dev/shm &> /dev/null - fi - fi -} - - -# vim:ts=4 diff --git a/src/livecd/profiles/global/aux-files/freeramdisk.c b/src/livecd/profiles/global/aux-files/freeramdisk.c deleted file mode 100644 index da82fba115..0000000000 --- a/src/livecd/profiles/global/aux-files/freeramdisk.c +++ /dev/null @@ -1,32 +0,0 @@ -#include <stdio.h> -#include <string.h> -#include <sys/mount.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <fcntl.h> -#include <sys/ioctl.h> -#include <errno.h> - -main(int argc, char **argv) -{ - char rname[256]="/dev/ram"; - char b[256]; - int f; - if (argv[1]) strcpy(rname,argv[1]); - -#if 0 /* don't use on a living system, /etc/mtab is not updated */ - if (umount(rname) && (errno != ENOENT)) { - sprintf(b,"freeramdisk: cannot umount %s %d",rname,errno); - perror(b); - exit(1); - } -#endif - - if ((f=open(rname,O_RDWR)) == -1) { - sprintf(b,"freeramdisk: cannot open %s",rname); - perror(b); - exit(1); - } - ioctl(f,BLKFLSBUF); - close(f); -} diff --git a/src/livecd/profiles/global/aux-files/fstab b/src/livecd/profiles/global/aux-files/fstab deleted file mode 100644 index 30872a215b..0000000000 --- a/src/livecd/profiles/global/aux-files/fstab +++ /dev/null @@ -1,8 +0,0 @@ -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/global/aux-files/Attic/fstab,v 1.1 2003/10/19 03:10:52 livewire Exp $ - -# /etc/fstab: static file system information. -proc /proc proc defaults 0 0 -tmpfs /dev/shm tmpfs defaults 0 0 - diff --git a/src/livecd/profiles/global/aux-files/hosts b/src/livecd/profiles/global/aux-files/hosts deleted file mode 100644 index 4da3032548..0000000000 --- a/src/livecd/profiles/global/aux-files/hosts +++ /dev/null @@ -1,11 +0,0 @@ -# -# hosts This file describes a number of hostname-to-address -# mappings for the TCP/IP subsystem. It is mostly -# used at boot time, when no name servers are running. -# On small systems, this file can be used instead of a -# "named" name server. Just add the names, addresses -# and any aliases to this file... -# - -127.0.0.1 localhost -192.168.1.2 cdimage diff --git a/src/livecd/profiles/global/aux-files/inittab b/src/livecd/profiles/global/aux-files/inittab deleted file mode 100644 index 9ffba4b324..0000000000 --- a/src/livecd/profiles/global/aux-files/inittab +++ /dev/null @@ -1,47 +0,0 @@ -# -# inittab This file describes how the INIT process should set up -# the system in a certain run-level. -# -# Author: Miquel van Smoorenburg, <miquels@cistron.nl> -# Modified by: Patrick J. Volkerding, <volkerdi@ftp.cdrom.com> -# Modified by: Daniel Robbins, <drobbins@gentoo.org> -# -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/global/aux-files/Attic/inittab,v 1.1 2003/10/19 03:10:52 livewire Exp $ - -# -# Default runlevel. - -id:3:initdefault: - -# System initialization (runs when system boots). -#DE:S12345:respawn:/sbin/devfsd /dev -fg -# Script to run when going single user (runlevel 1). -~~:S:wait:/sbin/sulogin - -si:S:sysinit:/sbin/rc boot -l0:0:wait:/sbin/rc shutdown -l1:1:wait:/sbin/rc single -l2:2:wait:/sbin/rc nonetwork -l3:3:wait:/sbin/rc default -l4:4:wait:/sbin/rc default -l5:5:wait:/sbin/rc default -l6:6:wait:/sbin/rc reboot -z6:6:respawn:/sbin/sulogin - -# TERMINALS -c1:12345:respawn:/sbin/mingetty --noclear --autologin root tty1 -c2:12345:respawn:/sbin/mingetty --noclear --autologin root tty2 -c3:12345:respawn:/sbin/mingetty --noclear --autologin root tty3 -c4:12345:respawn:/sbin/mingetty --noclear --autologin root tty4 - -# What to do at the "Three Finger Salute". -ca:12345:ctrlaltdel:/sbin/shutdown -r now - -# Used by /etc/init.d/xdm to control DM startup. -# Read the comments in /etc/init.d/xdm for more -# info. Do NOT remove, as this will start nothing -# extra at boot if /etc/init.d/xdm is not added -# to the "default" runlevel. -x:a:once:/etc/X11/startDM.sh - -# End of /etc/inittab diff --git a/src/livecd/profiles/global/aux-files/local b/src/livecd/profiles/global/aux-files/local deleted file mode 100644 index 6aa49e60b3..0000000000 --- a/src/livecd/profiles/global/aux-files/local +++ /dev/null @@ -1,78 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/global/aux-files/Attic/local,v 1.1 2003/10/19 03:10:52 livewire Exp $ - -HILITE="\033[1m" -NORMAL="\033[0m" - -NET="yes" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "nonet" ] - then - NET="no" - fi -done - -depend() { - after * -} - -blurb() { - echo -ne ${HILITE}${1} - #blurblen=${#1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} - -start() { - ebegin "Freeing initrd" - umount /initrd - /sbin/freeramdisk /dev/ram0 - #make our mtab look sane... - local mycdloc - mycdloc=`cat /tmp/mycd` - mycdloc=${mycdloc#/newroot*} - mount -f $mycdloc /mnt/cdrom -t iso9660 -o ro - if [ -e /mnt/livecd.cloop ] - then - mount -f /mnt/livecd.cloop /mnt/cloop -t ext2 -o ro - #cloop was cached to tmpfs so that CD could be unmounted. - else - mount -f /mnt/cdrom/livecd.cloop /mnt/cloop -t ext2 -o ro - fi - rm /tmp/mycd - mount -f tmpfs / -t tmpfs -o rw - eend - - echo "10000" > /proc/sys/fs/file-max - ebegin "Auto-scrambling root password for security" - echo root:`pwgen -s 16` | chpasswd > /dev/null 2>&1 - eend - if [ "$NET" = "yes" ] - then - ebegin "Auto-detecting network modules" - # Disable kernel messages to console: - echo "0" > /proc/sys/kernel/printk - local x - for x in /lib/modules/*/kernel/drivers/net/* - do - y=${x##*/} - y=${y%%.*} - echo -ne " ${GOOD}*${NORMAL} Scanning for ${y}..." - insmod -f ${x} > /dev/null 2>&1 - backup - done - echo "6" > /proc/sys/kernel/printk - fi -} - -stop() { - return -} - -# vim:ts=4 diff --git a/src/livecd/profiles/global/aux-files/localstart.gl b/src/livecd/profiles/global/aux-files/localstart.gl deleted file mode 100644 index d128584a85..0000000000 --- a/src/livecd/profiles/global/aux-files/localstart.gl +++ /dev/null @@ -1,8 +0,0 @@ -# /etc/conf.d/local.start: -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/global/aux-files/Attic/localstart.gl,v 1.1 2003/10/19 03:10:52 livewire Exp $ - -# This is a good place to load any misc. -# programs on startup ( 1>&2 ) - -modprobe nvidia && opengl-update nvidia && cp /etc/X11/xfree-nvidia /etc/X11/XF86Config -modprobe fglrx && opengl-update ati && cp /etc/X11/xfree-ati /etc/X11/XF86Config diff --git a/src/livecd/profiles/global/aux-files/modules b/src/livecd/profiles/global/aux-files/modules deleted file mode 100644 index f198497178..0000000000 --- a/src/livecd/profiles/global/aux-files/modules +++ /dev/null @@ -1,47 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/global/aux-files/Attic/modules,v 1.1 2003/10/19 03:10:52 livewire Exp $ - - -depend() { - need bootmisc localmount -} - -start() { - [ -f /proc/modules ] || return - [ -x /sbin/depmod ] || return - ebegin "Calculating module dependencies" - if [ -z "$CDBOOT" ] - then - /usr/sbin/update-modules &>/dev/null - eend $? "Failed to calculate dependencies" - else - /usr/sbin/update-modules &>/dev/null - eend - fi - # Loop over every line in /etc/modules.autoload. - (cat /etc/modules.autoload; echo) | # make sure there is a LF at the end - while read module args - do - case "${module}" in - \#*|"") continue ;; - esac - ebegin " Loading module ${module}" - modprobe ${module} ${args} &>/dev/null - eend $? " Failed to load ${module}" - done - echo - - # - # Just in case a sysadmin prefers generic symbolic links in - # /lib/modules/boot for boot time modules we will load these modules - # - if [ -n "$(modprobe -l -t boot)" ] - then - modprobe -a -t boot \* &>/dev/null - fi -} - - -# vim:ts=4 diff --git a/src/livecd/profiles/global/aux-files/resolv.conf b/src/livecd/profiles/global/aux-files/resolv.conf deleted file mode 100644 index ab1cae14ce..0000000000 --- a/src/livecd/profiles/global/aux-files/resolv.conf +++ /dev/null @@ -1 +0,0 @@ -nameserver ##NS1## diff --git a/src/livecd/profiles/global/aux-files/xfree-nvidia b/src/livecd/profiles/global/aux-files/xfree-nvidia deleted file mode 100644 index 384c866ad7..0000000000 --- a/src/livecd/profiles/global/aux-files/xfree-nvidia +++ /dev/null @@ -1,290 +0,0 @@ -########################################################################## -# Sample XF86Config file for NVIDIA XFree86 drivers. -# -# Refer to the XF86Config(4/5) man page for details about the format of -# this file. -# -# Be sure to replace the monitor values with correct values for your -# monitor! -########################################################################## - - -Section "Files" - - RgbPath "/usr/X11R6/lib/X11/rgb" - FontPath "unix/:-1" - -EndSection - - -########################################################################## -# Server flags section. -########################################################################## - -Section "ServerFlags" - - # Uncomment this to cause a core dump at the spot where a signal is - # received. This may leave the console in an unusable state, but may - # provide a better stack trace in the core dump to aid in debugging - #NoTrapSignals - - # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence - # This allows clients to receive this key event. - #DontZap - - # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching - # sequences. This allows clients to receive these key events. - #DontZoom - - # This allows the server to start up even if the - # mouse device can't be opened/initialised. - AllowMouseOpenFail - -EndSection - - -########################################################################## -# Input devices -########################################################################## - -# -# Keyboard section -# -Section "InputDevice" - - Identifier "Keyboard1" - Driver "Keyboard" - Option "AutoRepeat" "250 30" - - Option "XkbRules" "xfree86" - Option "XkbModel" "pc105" - Option "XkbLayout" "us" - -EndSection - - -# -# Pointer section -# -Section "InputDevice" - - Identifier "Mouse1" - Driver "mouse" - Option "Protocol" "IMPS/2" - Option "Device" "/dev/input/mice" - Option "Buttons" "7" - Option "ZAxisMapping" "4 5" -EndSection - - -########################################################################## -# Module section -########################################################################## - -Section "Module" - - Load "dbe" - - # Load the glx module. - Load "glx" - - Load "extmod" - - Load "type1" - Load "freetype" -EndSection - - -########################################################################## -# Monitor section -########################################################################## - -Section "Monitor" - - Identifier "MyMonitor" - VendorName "Mitsubisi" - ModelName "Diamond Plus 120u" - - # be sure to replace these values with values appropriate for your - # monitor! -# HorizSync 31-82 -# VertRefresh 55-120 - -EndSection - - -########################################################################## -# Graphics device section(s) -########################################################################## - -Section "Device" - Identifier "NV AGP" - VendorName "nvidia" - Driver "nvidia" - # update this with the PCI id of your card. Consult the output - # of the 'lspci' command. -# BusID "PCI:1:0:0" - Option "NoLogo" "1" -# Option "NoDDC" "1" -EndSection - -Section "Device" - Identifier "NV PCI" - VendorName "nvidia" - Driver "nvidia" - # update this with the PCI id of your card. Consult the output - # of the 'lspci' command. - BusID "PCI:0:13:0" -EndSection - -Section "Device" - Identifier "NV AGP TwinView" - VendorName "nvidia" - Driver "nvidia" - # update this with the PCI id of your card. Consult the output - # of the 'lspci' command. - BusID "PCI:1:0:0" - - # sample twinview setup - Option "TwinView" - # be sure to replace the HorizSync and VertRefresh with correct values - # for your monitor! - Option "SecondMonitorHorizSync" "31-82" - Option "SecondMonitorVertRefresh" "55-120" - Option "TwinViewOrientation" "RightOf" - Option "MetaModes" "1280x1024,1280x1024; 1024x768,1024x768" - Option "ConnectedMonitor" "crt,crt" -EndSection - - -########################################################################## -# Screen sections -########################################################################## - -# -# screen section for an nvidia AGP card -# -Section "Screen" - Identifier "Screen AGP" - Device "NV AGP" - Monitor "MyMonitor" - DefaultColorDepth 24 - DefaultFbBpp 32 - Subsection "Display" - Depth 8 - Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x400" - EndSubsection - Subsection "Display" - Depth 16 - Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - Subsection "Display" - Depth 24 - Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - -EndSection - - -# -# screen section for an nvidia PCI card -# -Section "Screen" - Identifier "Screen PCI" - Device "NV PCI" - Monitor "MyMonitor" - DefaultColorDepth 24 - Subsection "Display" - Depth 8 - Modes "1280x1024" "1024x768" "800x600" "640x400" - EndSubsection - Subsection "Display" - Depth 16 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - Subsection "Display" - Depth 24 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection -EndSection - -# -# screen section for an nvidia AGP TwinView card -# (look at the appropriate Device section) -# -Section "Screen" - Identifier "Screen AGP TwinView" - Device "NV AGP TwinView" - Monitor "MyMonitor" - DefaultColorDepth 24 - Subsection "Display" - Depth 8 - Modes "1280x1024" "1024x768" "800x600" "640x400" - EndSubsection - Subsection "Display" - Depth 16 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - Subsection "Display" - Depth 24 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection -EndSection - - -########################################################################## -# ServerLayout sections -# (invoke using the '-layout' option of 'startx'. -########################################################################## - -# -# just one agp card -# -Section "ServerLayout" - Identifier "AGP" - Screen "Screen AGP" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# just one pci card -# -Section "ServerLayout" - Identifier "PCI" - Screen "Screen PCI" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# 2 cards, non twinview -# -Section "ServerLayout" - Identifier "Both" - Screen "Screen AGP" - Screen "Screen PCI" LeftOf "Screen AGP" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# just one agp twinview card -# -Section "ServerLayout" - Identifier "AGPTwinView" - Screen "Screen AGP TwinView" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# 2 cards, one agp twinview and one pci (3 monitors total) -# -Section "ServerLayout" - Identifier "BothTwinView" - Screen "Screen AGP TwinView" - Screen "Screen PCI" LeftOf "Screen AGP TwinView" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection diff --git a/src/livecd/profiles/global/boot.msg b/src/livecd/profiles/global/boot.msg deleted file mode 100644 index aa0bfb1dee..0000000000 --- a/src/livecd/profiles/global/boot.msg +++ /dev/null @@ -1,3 +0,0 @@ -17 gentoo.lss - -Gentoo Linux 1.4 http://www.gentoo.org/ RELEASE: 1.4-ReleaseEnter to boot; F2 for options. diff --git a/src/livecd/profiles/global/clean b/src/livecd/profiles/global/clean deleted file mode 100644 index 5c1e068ca5..0000000000 --- a/src/livecd/profiles/global/clean +++ /dev/null @@ -1,55 +0,0 @@ -#!/bin/bash -if [ -z "$CD_BUILDCHROOT" ] -then - echo "Error: \$CD_BUILDCHROOT not defined." - exit 1 -fi - -#keep important C/C++/Java shared libraries -touch ${CD_BUILDCHROOT}/usr/lib/gcc-lib/*/*/*.so* -touch ${CD_BUILDCHROOT}/usr/lib/libstdc++* -touch ${CD_BUILDCHROOT}/etc/env.d/??gcc* - -mount_all -#remove extra build-related packages -chroot ${CD_BUILDCHROOT} /bin/bash -e <<EOF -source /etc/profile -emerge -C autoconf automake bin86 binutils libtool m4 bison ld.so make perl patch linux-headers man-pages || exit 1 -emerge -C sash bison flex gettext texinfo ccache addpatches man groff lib-compat gcc python miscfiles ucl || exit 1 -EOF -#detect chroot errors: -[ $? -ne 0 ] && chroot_die "problems cleaning packages" -umount_all - -#final cleanups -for x in /var/tmp/portage /var/db /var/empty /var/cache \ -/var/lock /tmp /usr/portage /usr/share/man /usr/share/info /usr/share/unimaps \ -/usr/include /usr/share/zoneinfo /usr/share/dict /usr/share/doc /usr/share/ss /usr/share/state /usr/share/texinfo \ -/var/tmp /usr/lib/python2.2 /usr/lib/portage /usr/share/gettext /usr/share/i18n /usr/share/rfc \ -/usr/X11R6/man /usr/X11R6/include /usr/X11R6/lib/X11/config /usr/X11R6/lib/X11/etc /usr/X11R6/lib/X11/doc -do - rm -rf ${CD_BUILDCHROOT}/${x}/* ${CD_BUILDCHROOT}/${x}/.* -done -rm -rf ${CD_BUILDCHROOT}/usr/share/keymaps - -for x in /sbin/insmod.static /sbin/sln \ -/usr/X11R6/bin/Xnest \ -/usr/X11R6/bin/Xprt \ -/usr/X11R6/bin/Xvfb -do - rm ${CD_BUILDCHROOT}/${x} -done - -#clean up the kernel source tree... -rm -rf ${CD_BUILDCHROOT}/usr/src/linux* -rm -rf ${CD_BUILDCHROOT}/var/db/pkg/sys-kernel/* -rm -rf ${CD_BUILDCHROOT}/usr/lib/gcc-lib/*/*/libgcj* -rm -rf ${CD_BUILDCHROOT}/usr/lib/*.a -rm -rf ${CD_BUILDCHROOT}/lib/*.a -rm -rf ${CD_BUILDCHROOT}/usr/X11R6/lib/*.a -#remove entire directory trees (argument 1) *except* for these files/dir trees (arguments 2+) -zapmost /usr/share/terminfo l/linux v/vt100 v/vt102 n/nxterm x/xterm x/xterm-color -zapmost /usr/share/locale C en_US -zapmost /usr/X11R6/lib/X11/locale iso8859-1 iso8859-15 common en_US.UTF-8 -[ -e ${CD_BUILDCHROOT}/usr/lib/locale ] && zapmost /usr/lib/locale en_US -zapmost /usr/share/misc magic pci.ids diff --git a/src/livecd/profiles/global/gentoo.lss b/src/livecd/profiles/global/gentoo.lss Binary files differdeleted file mode 100644 index 6c7c89c82b..0000000000 --- a/src/livecd/profiles/global/gentoo.lss +++ /dev/null diff --git a/src/livecd/profiles/global/help.msg b/src/livecd/profiles/global/help.msg deleted file mode 100644 index b3393366b0..0000000000 --- a/src/livecd/profiles/global/help.msg +++ /dev/null @@ -1 +0,0 @@ -Gentoo Linux 1.4 LiveCD boot options - [F1 to redisplay boot graphic] The Gentoo Linux LiveCD allows for a number of boot options to be specified at the initial isolinux prompt. To specify custom boot options, type "gentoo" followed by a space, and then specify the boot options you want (separate each boot option with a space.) If no boot options are needed, just hit enter at the prompt to boot. The following boot options (as well as others) are recognized: cdcache Cache the entire runtime portion of the CD in RAM. This uses 40MB of RAM but allows you to umount /mnt/cdrom, eject CD, and mount another. noapic This option disables support for advanced programmable interrupt controllers, which cause booting problems for some systems -- particularly laptops. noscsi This option disables boot-time storage device auto-detection; use this option if the LiveCD locks up during the storage detection phase. (If this happens to you, file a bug at http://bugs.gentoo.org/ as well.) nonet Disable boot-time network device auto-detection. acpi=on Different from APIC, ACPI stands for "advanced configuration and power interface." ACPI is required for some legacy-free systems, but can potentially cause problems on others. If you're having boot trouble on a newer system, try using this option. ide=nodma Forcefully disable DMA for malfunctioning IDE devices. diff --git a/src/livecd/profiles/global/isolinux.cfg b/src/livecd/profiles/global/isolinux.cfg deleted file mode 100644 index 272a5d03cf..0000000000 --- a/src/livecd/profiles/global/isolinux.cfg +++ /dev/null @@ -1,13 +0,0 @@ -default gentoo -append initrd=initrd acpi=off root=/dev/ram0 init=/linuxrc - -timeout 300 -prompt 1 -display boot.msg -F1 boot.msg -F2 help.msg - -label livecd - kernel gentoo - append initrd=initrd acpi=off root=/dev/ram0 init=/linuxrc - diff --git a/src/livecd/profiles/global/keymaps/bin-keymaps.tar.gz b/src/livecd/profiles/global/keymaps/bin-keymaps.tar.gz Binary files differdeleted file mode 100644 index 8895ca4689..0000000000 --- a/src/livecd/profiles/global/keymaps/bin-keymaps.tar.gz +++ /dev/null diff --git a/src/livecd/profiles/global/keymaps/key.lst b/src/livecd/profiles/global/keymaps/key.lst deleted file mode 100644 index 7396871474..0000000000 --- a/src/livecd/profiles/global/keymaps/key.lst +++ /dev/null @@ -1,10 +0,0 @@ -Please select a keymap from the following list by typing in the appropriate -name or number. Hit Enter for the default "us/41" US English keymap. - - 1 azerty 7 cf 13 es 19 il 25 mk 31 ru 37 trf - 2 be 8 croat 14 et 20 is 26 nl 32 se 38 trq - 3 bg 9 cz 15 fi 21 it 27 no 33 sg 39 ua - 4 br-a 10 de 16 fr 22 jp 28 pl 34 sk-y 40 uk - 5 br-l 11 dk 17 gr 23 la 29 pt 35 sk-z 41 us - 6 by 12 dvorak 18 hu 24 lt 30 ro 36 slovene 42 wangbe - diff --git a/src/livecd/profiles/global/linuxrc b/src/livecd/profiles/global/linuxrc deleted file mode 100644 index abe0e80d9e..0000000000 --- a/src/livecd/profiles/global/linuxrc +++ /dev/null @@ -1,198 +0,0 @@ -#!/bin/sh -# -# Script to boot up a system with autodetection of CD location -# -# Daniel Robbins <drobbins@gentoo.org> -# Copyright 2002 Gentoo Technologies, Inc. -# Distributed under the GPL - -PATH=/usr/sbin:/usr/bin:/sbin:/bin -BACK_UP="\033[1K\033[0G" -HILITE="\033[1m" -NORMAL="\033[0m" -mount -oremount,rw / -mount /proc -# Disable kernel messages to console: -echo "0" > /proc/sys/kernel/printk -SCSI="yes" -CDCACHE="no" -IDEBUG="no" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "noscsi" ] - then - SCSI="no" - elif [ "$x" = "cdcache" ] - then - CDCACHE="yes" - elif [ "$x" = "idebug" ] - then - IDEBUG="yes" - fi -done - -blurb() { - echo -ne ${HILITE}${1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} - -# Create the new root FS -mkdir newroot -mount -t tmpfs tmpfs /newroot -cd /newroot -mkdir dev mnt mnt/cdrom mnt/cloop mnt/.init.d mnt/gentoo - -if [ ! -e /newroot/dev/.devfsd ] -then - #mount devfs - mount -t devfs devfs /newroot/dev -fi - -mounted="" - -initmsg() { - echo -e "${HILITE}${*}${NORMAL}" -} - -nocd() { - echo -e "${HILITE}---- CD not found${NORMAL}" - umount /newroot - ash - umount /proc - exec /linuxrc -} - -getkeymap() { - local mykeymap - echo -ne ${HILITE} - cat /keymaps/key.lst - echo -ne ${NORMAL} - read -p "Keymap selection: " mykeymap - if [ -e /keymaps/${mykeymap}.map ] - then - echo -e "${HILITE}---- Loading ${mykeymap} keymap${NORMAL}" - loadkmap < /keymaps/${mykeymap}.map - elif [ "$mykeymap" = "" ] - then - #default keymap is "us" - echo -e "${HILITE}---- Loading default (US) keymap${NORMAL}" - loadkmap < /keymaps/us.map - else - getkeymap - fi -} - -modules_scan() { - local type - type=${1}; shift - for x in "$@" - do - if [ ! -e /modules/${type}/${x}.o ] - then - echo -e "${HILITE}---- Module ${x}.o not found; skipping...${NORMAL}" - continue - fi - blurb "---- Scanning for ${x}..." - insmod -f /modules/${type}/${x}.o > /dev/null 2>&1 - if [ $? -eq 0 ] - then - backup - echo -e "---- Detected ${x} hardware${NORMAL}" - else - backup - echo -ne "${NORMAL}" - fi - done -} - -findmount() { - if [ "$*" = "" ] - then - nocd - fi - while ! mount -t iso9660 -r $1 /newroot/mnt/cdrom; do - shift - if [ "$1" = "" ]; then - nocd - fi - done - if [ ! -e /newroot/mnt/cdrom/livecd.cloop -a ! -e /newroot/mnt/cdrom/livecd.loop ]; then - echo -e "${HILITE}---- $1 is not a LiveCD; skipping...${NORMAL}" - umount /newroot/mnt/cdrom - shift - findmount $* - fi - mounted=$1 - echo -e "${HILITE}---- CD medium found on $1${NORMAL}" -} - -# Mount the CD -if [ "$SCSI" = "yes" ] -then - echo -e "${HILITE}---- Beginning storage hardware detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan storage ##STORAGE_MODULES## -fi - -getkeymap - -initmsg "---- Mounting the CD" -findmount /newroot/dev/cdroms/* -if [ "$IDEBUG" = "yes" ] -then - exec /bin/sh -fi -if [ -e /newroot/mnt/cdrom/livecd.cloop ] -then - #compressed loopback - mknod /dev/cloop b 240 0 - if [ "$CDCACHE" = "yes" ] - then - initmsg "---- Attempting to cache CD image to tmpfs" - cp /newroot/mnt/cdrom/livecd.cloop /newroot/mnt/ - if [ $? -ne 0 ] - then - initmsg "---- Caching failed (likely due to lack of space" - CDCACHE="no" - rm -f /newroot/mnt/livecd.cloop - else - insmod /modules/cloop.o file=/newroot/mnt/livecd.cloop - mount -o ro -t ext2 /dev/cloop /newroot/mnt/cloop - fi - fi - if [ "$CDCACHE" = "no" ] - then - initmsg "---- Mounting compressed loopback filesystem" - insmod /modules/cloop.o file=/newroot/mnt/cdrom/livecd.cloop - mount -o ro -t ext2 /dev/cloop /newroot/mnt/cloop - fi -else - mknod /dev/loop0 b 7 0 - initmsg "---- Mounting loopback filesystem" - losetup /dev/loop0 /newroot/mnt/cdrom/livecd.loop - mount -o ro -t ext2 /dev/loop0 /newroot/mnt/cloop -fi -# Now the CD is mounted on /newroot/cdrom -initmsg "---- Copying and symlinking files from CD to populate /" - -cd /newroot/ -for x in bin sbin lib boot usr opt -do - ln -s mnt/cloop/${x} ${x} -done -mkdir initrd proc tmp -chmod 1777 tmp -(cd /newroot/mnt/cloop; cp -a etc root home var /newroot) -#store name of mounted CD so we can add it to mtab.... (/etc/init.d/local will take it -#from here... -echo $mounted > tmp/mycd - -initmsg "---- Switching to tmpfs root filesystem" -echo "6" > /proc/sys/kernel/printk -umount /proc -pivot_root . initrd -exec chroot . /sbin/init </dev/console >/dev/console 2>&1 diff --git a/src/livecd/profiles/global/memtest/memtest.README b/src/livecd/profiles/global/memtest/memtest.README deleted file mode 100644 index fdb2d6599a..0000000000 --- a/src/livecd/profiles/global/memtest/memtest.README +++ /dev/null @@ -1 +0,0 @@ -This is precomp.bin from memtest-3.0-r1 diff --git a/src/livecd/profiles/global/memtest/memtest.bin b/src/livecd/profiles/global/memtest/memtest.bin Binary files differdeleted file mode 100644 index 9a2132af04..0000000000 --- a/src/livecd/profiles/global/memtest/memtest.bin +++ /dev/null diff --git a/src/livecd/profiles/global/net-setup b/src/livecd/profiles/global/net-setup deleted file mode 100644 index b74ed027be..0000000000 --- a/src/livecd/profiles/global/net-setup +++ /dev/null @@ -1,32 +0,0 @@ -#!/bin/bash -[ "$1" = "" ] && echo "net-setup: please specify a network interface" && exit 1 -[ ! -d /tmp/setup.opts ] && mkdir /tmp/setup.opts -cd /tmp/setup.opts -dialog --title "Network Setup" --menu "Time to set up the $1 interface! You can use DHCP to automatically configure a network interface or you can specify an IP and related settings manually. Choose one option:" 20 60 7 0 "Use DHCP to auto-detect my network settings" 1 "Specify an IP address manually" 2> ${1}.1 -mynetsel=`cat ${1}.1` -case $mynetsel in -0) - /sbin/dhcpcd -t 10 ${1} - ;; -1) - dialog --title "IP address" --inputbox "Please enter an IP address for $1:" 20 50 "192.168.1.1" 2> ${1}.IP - dialog --title "Broadcast address" --inputbox "Please enter a Broadcast address for $1:" 20 50 "192.168.1.255" 2> ${1}.B - dialog --title "Network mask" --inputbox "Please enter a Network Mask for $1:" 20 50 "255.255.255.0" 2> ${1}.NM - dialog --title "Gateway" --inputbox "Please enter a Gateway for $1 (hit enter for none:)" 20 50 2> ${1}.GW - dialog --title "DNS server" --inputbox "Please enter a name server to use (hit enter for none:)" 20 50 2> ${1}.NS - /sbin/ifconfig $1 `cat ${1}.IP` broadcast `cat ${1}.B` netmask `cat ${1}.NM` - myroute=`cat ${1}.GW` - if [ "$myroute" != "" ] - then - /sbin/route add default gw $myroute dev $1 netmask 0.0.0.0 metric 1 - fi - myns="`cat ${1}.NS`" - if [ "$myns" = "" ] - then - : > /etc/resolv.conf - else - echo "nameserver $myns" > /etc/resolv.conf - fi - ;; -esac -echo "Type \"ifconfig\" to make sure the interface was configured correctly." diff --git a/src/livecd/profiles/global/opengl-update b/src/livecd/profiles/global/opengl-update deleted file mode 100644 index 570c87e81e..0000000000 --- a/src/livecd/profiles/global/opengl-update +++ /dev/null @@ -1,95 +0,0 @@ -#!/bin/bash -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# Author: Martin Schlemmer <azarah@gentoo.org> -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/global/Attic/opengl-update,v 1.1 2003/10/19 03:10:52 livewire Exp $ - - -source /etc/init.d/functions.sh - -if [ `id -u` -ne 0 ] -then - eerror "${0}: must be root." - exit 1 -fi - -usage() { -cat << FOO -usage: opengl-update <GL implementation> - -note: - This utility switch between OpenGL implementations. Currently there - are two supported implementations, namely "xfree" and "nvidia", the - implementations for XFree86 and the NVidia drivers respectively. - -examples: - opengl-update xfree - This will setup things to use libGL.so from XFree86 - - opengl-update nvidia - This will setup things to use libGL.so from the NVidia drivers. - -FOO - exit 1 -} - -if [ "$#" -ne 1 ] -then - usage -fi -if [ ! -d /usr/lib/opengl/${1} ] -then - usage -else - ebegin "Switching to ${1} OpenGL interface" - - #setup the $LDPATH - #echo "LDPATH=/usr/lib/opengl/${1}/lib" >/etc/env.d/09opengl - #/usr/sbin/env-update &>/dev/null - - #setup the /usr/lib/libGL.so symlink - rm -f /etc/opengl/libGL.so /etc/opengl/libGL.so.1 - - realname="$(readlink /usr/lib/opengl/${1}/lib/libGL.so)" - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libGL.so - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libGL.so.1 - - #setup the /usr/X11R6/lib/libMesaGL.so symlink - rm -f /etc/opengl/libMesaGL.so - realname="$(readlink /usr/lib/opengl/${1}/lib/libGL.so)" - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libMesaGL.so - - rm -f /etc/opengl/libGLcore.so* - - if [ -e /usr/lib/opengl/${1}/lib/libGLcore.so ] - then - realname="$(readlink /usr/lib/opengl/${1}/lib/libGLcore.so)" - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libGLcore.so - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libGLcore.so.1 - fi - - #setup the /usr/X11R6/lib/modules/extensions/libglx.so symlink - rm -f /etc/opengl/libglx.* - - if [ -e /usr/lib/opengl/${1}/extensions/libglx.so ] - then - ln -sf /usr/lib/opengl/${1}/extensions/libglx.so \ - /etc/opengl/libglx.so - fi - #setup the /usr/X11R6/lib/modules/extensions/libglx.a symlink - if [ -e /usr/lib/opengl/${1}/extensions/libglx.a ] - then - ln -sf /usr/lib/opengl/${1}/extensions/libglx.a \ - /etc/opengl/libglx.a - fi - - eend 0 -fi - - -# vim:ts=4 diff --git a/src/livecd/profiles/global/openglify b/src/livecd/profiles/global/openglify deleted file mode 100644 index 3ef880bdd7..0000000000 --- a/src/livecd/profiles/global/openglify +++ /dev/null @@ -1,23 +0,0 @@ -#!/bin/bash -#This script is designed to tweak the system for CD-based opengl-update -#set up our flexible opengl stuff: - -if [ ! -e ${CD_BUILDCHROOT}/etc/opengl ] -then - cp ${LIVECD_ROOT}/profiles/global/opengl-update ${CD_BUILDCHROOT}/usr/sbin - #move symlinks to a malleable /etc/opengl directory. - install -d ${CD_BUILDCHROOT}/etc/opengl - mv ${CD_BUILDCHROOT}/usr/lib/libGL.* ${CDROOT}/etc/opengl/ - mv ${CD_BUILDCHROOT}/usr/lib/libGLcore.* ${CDROOT}/etc/opengl/ - ln -sf /etc/opengl/libGL.so ${CD_BUILDCHROOT}/usr/lib/libGL.so - ln -sf /etc/opengl/libGL.so.1 ${CD_BUILDCHROOT}/usr/lib/libGL.so.1 - ln -sf /etc/opengl/libGLcore.so ${CD_BUILDCHROOT}/usr/lib/libGLcore.so - ln -sf /etc/opengl/libGLcore.so.1 ${CD_BUILDCHROOT}/usr/lib/libGLcore.so.1 - mv ${CD_BUILDCHROOT}/usr/X11R6/lib/libMesaGL.so ${CDROOT}/etc/opengl/ - ln -sf /etc/opengl/libMesaGL.so ${CD_BUILDCHROOT}/usr/X11R6/lib/libMesaGL.so - mv ${CD_BUILDCHROOT}/usr/X11R6/lib/modules/extensions/libglx.so ${CDROOT}/etc/opengl/ - mv ${CD_BUILDCHROOT}/usr/X11R6/lib/modules/extensions/libglx.a ${CDROOT}/etc/opengl/ - ln -s /etc/opengl/libglx.so ${CD_BUILDCHROOT}/usr/X11R6/lib/modules/extensions/libglx.so - ln -s /etc/opengl/libglx.a ${CD_BUILDCHROOT}/usr/X11R6/lib/modules/extensions/libglx.a -fi - diff --git a/src/livecd/profiles/global/settings b/src/livecd/profiles/global/settings deleted file mode 100644 index fa0cf3f685..0000000000 --- a/src/livecd/profiles/global/settings +++ /dev/null @@ -1,4 +0,0 @@ -CD_HOSTNAME="cdimage" -CD_PORTAGE_PROFILE="default-x86-1.4" -CD_PORTDIR="/usr/portage" -CD_ISONAME="gentoo.iso" diff --git a/src/livecd/profiles/global/x-setup b/src/livecd/profiles/global/x-setup deleted file mode 100644 index 56c0adfdfb..0000000000 --- a/src/livecd/profiles/global/x-setup +++ /dev/null @@ -1,37 +0,0 @@ -#!/bin/bash - -#try to load the agpgart module; use it if it loads. Otherwise default to NvAGP -modprobe agpgart -#now, for the key component :) -modprobe nvidia -if [ "`lsmod | cut -f1 -d\" \" | grep ^nvidia$`" = "nvidia" ] -then - echo "NVIDIA driver loaded." -else - echo "NVIDIA driver was unable to load; aborting." - echo "This demo requires NVIDIA graphics hardware." - exit 1 -fi -opengl-update nvidia - -source /etc/sysconfig/mouse - -VERTREFRESH=`ddcxinfo -vsync` - -if [ "$VERTREFRESH" = "0-0" ] -then - echo "No DDC information detected; assuming reasonable defaults." - VERTREFRESH=50-80 - HORIZSYNC=30-70 -else - HORIZSYNC=`ddcxinfo -hsync` -fi - -sed -e "s/##MOUSETYPE##/$XMOUSETYPE/" \ - -e "s/##MOUSEDEV##/$DEVICE/" \ - -e "s/##VERTREFRESH##/$VERTREFRESH/" \ - -e "s/##HORIZSYNC##/$HORIZSYNC/" \ -/etc/X11/XF86Config.master > /etc/X11/XF86Config -#time to fire up X -exec /usr/X11R6/bin/xinit - diff --git a/src/livecd/profiles/kde/=baselayout-1.8.6 b/src/livecd/profiles/kde/=baselayout-1.8.6 deleted file mode 100644 index 124687a487..0000000000 --- a/src/livecd/profiles/kde/=baselayout-1.8.6 +++ /dev/null @@ -1,19 +0,0 @@ - -These are the packages that I would merge, in order: - -emerge: please tell me what to do. - - -Usage: - emerge [ options ] [ action ] [ ebuildfile | tbz2file | dependency ] [ ... ] - emerge [ options ] [ action ] < system | world > - emerge < sync | info > - emerge --resume [--pretend | --skipfirst] - emerge help [ system | config | sync ] -Options: -[bcCdDefhikKlnoOpPsSuUvV] [--oneshot] [--noconfmem] - [--columns] [--nospinner] -Actions: [ clean | depclean | inject | prune | regen | search | unmerge ] - - - For more help try 'emerge --help' or consult the man page. - diff --git a/src/livecd/profiles/kde/XF86Config.ati b/src/livecd/profiles/kde/XF86Config.ati deleted file mode 100644 index 4f62e673e0..0000000000 --- a/src/livecd/profiles/kde/XF86Config.ati +++ /dev/null @@ -1,153 +0,0 @@ -Section "dri" - Mode 0666 -EndSection - -# ********************************************************************** -# Module section -- this section is used to specify -# which dynamically loadable modules to load. -# ********************************************************************** -# -Section "Module" - -# This loads the DBE extension module. - - Load "dbe" # Double buffer extension - -# This loads the miscellaneous extensions module, and disables -# initialisation of the XFree86-DGA extension within that module. - SubSection "extmod" - Option "omit xfree86-dga" # don't initialise the DGA extension - EndSubSection - -# This loads the Type1 and FreeType font modules - Load "type1" - Load "freetype" - -# This loads the GLX module - Load "glx" # libglx.a - Load "dri" # libdri.a - -EndSection - -# ********************************************************************** -# Files section. This allows default font and rgb paths to be set -# ********************************************************************** - -Section "Files" - -# The location of the RGB database. Note, this is the name of the -# file minus the extension (like ".txt" or ".db"). There is normally -# no need to change the default. - - RgbPath "/usr/X11R6/lib/X11/rgb" - -# Multiple FontPath entries are allowed (which are concatenated together), -# as well as specifying multiple comma-separated entries in one FontPath -# command (or a combination of both methods) -# -# If you don't have a floating point coprocessor and emacs, Mosaic or other -# programs take long to start up, try moving the Type1 and Speedo directory -# to the end of this list (or comment them out). -# - - - FontPath "/usr/X11R6/lib/X11/fonts/local/" - FontPath "/usr/X11R6/lib/X11/fonts/misc/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" - FontPath "/usr/X11R6/lib/X11/fonts/Type1/" - FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" - -# The module search path. The default path is shown here. - -# ModulePath "/usr/X11R6/lib/modules" - -EndSection - - -Section "InputDevice" - - Identifier "Keyboard1" - Driver "Keyboard" - Option "AutoRepeat" "500 30" - Option "XkbRules" "xfree86" - Option "XkbModel" "pc101" - Option "XkbLayout" "us" - -EndSection - -Section "InputDevice" - - Identifier "Mouse1" - Driver "mouse" - Option "Protocol" "##MOUSEPROTO##" - Option "ZAxisMapping" "4 5" - Option "Device" "##MOUSEDEV##" - -EndSection - -Section "Monitor" - Identifier "Monitor0" - HorizSync ##HORIZSYNC## - VertRefresh ##VERTREFRESH## -EndSection - -Section "Device" - Identifier "ATI Graphics Adapter" - Driver "fglrx" - Option "no_accel" "no" - Option "no_dri" "no" - Option "DesktopSetup" "0x00000000" - Option "MonitorLayout" "AUTO, AUTO" - Option "IgnoreEDID" "off" - Option "HSync2" "unspecified" - Option "VRefresh2" "unspecified" - Option "ScreenOverlap" "0" - Option "GammaCorrectionI" "0x00000000" - Option "GammaCorrectionII" "0x00000000" -# === OpenGL specific profiles/settings === - Option "Capabilities" "0x00000800" -# === Video Overlay for the Xv extension === - Option "VideoOverlay" "on" -# === OpenGL Overlay === -# Note: When OpenGL Overlay is enabled, Video Overlay -# will be disabled automatically - Option "OpenGLOverlay" "off" -# === Misc Options === - Option "UseFastTLS" "0" - Option "BlockSignalsOnLock" "on" - Option "UseInternalAGPGART" "yes" - Option "ForceGenericCPU" "no" - Screen 0 -EndSection - -# ********************************************************************** -# Screen sections -# ********************************************************************** - -# Any number of screen sections may be present. Each describes -# the configuration of a single screen. A single specific screen section -# may be specified from the X server command line with the "-screen" -# option. -Section "Screen" - Identifier "Screen0" - Device "ATI Graphics Adapter" - Monitor "Monitor0" - DefaultDepth 24 - #Option "backingstore" - - Subsection "Display" - Depth 24 - Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" "512x384" - ViewPort 0 0 - EndSubsection -EndSection - -Section "ServerLayout" - Identifier "Server Layout" - Screen "Screen0" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection diff --git a/src/livecd/profiles/kde/XF86Config.nvidia b/src/livecd/profiles/kde/XF86Config.nvidia deleted file mode 100644 index 44ca0c4752..0000000000 --- a/src/livecd/profiles/kde/XF86Config.nvidia +++ /dev/null @@ -1,105 +0,0 @@ -Section "ServerLayout" - Identifier "XFree86 Configured" - Screen 0 "Screen0" 0 0 - InputDevice "Mouse0" "CorePointer" - InputDevice "Keyboard0" "CoreKeyboard" -EndSection - -Section "Files" - RgbPath "/usr/X11R6/lib/X11/rgb" - ModulePath "/usr/X11R6/lib/modules" - - FontPath "/usr/X11R6/lib/X11/fonts/misc/" - FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" - FontPath "/usr/X11R6/lib/X11/fonts/Type1/" - FontPath "/usr/X11R6/lib/X11/fonts/CID/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" -EndSection - -Section "Module" - Load "dbe" -# Load "dri" - Load "extmod" - Load "glx" - Load "record" - Load "xtrap" - Load "speedo" - Load "type1" -EndSection - -Section "InputDevice" - Identifier "Keyboard0" - Driver "keyboard" -EndSection - -Section "InputDevice" - Identifier "Mouse0" - Driver "mouse" - Option "Protocol" "##MOUSEPROTO##" - Option "Device" "##MOUSEDEV##" - Option "ZAxisMapping" "4 5" -EndSection - -Section "Monitor" - Identifier "Monitor0" - VendorName "Monitor Vendor" - ModelName "Monitor Model" - HorizSync ##HORIZSYNC## - VertRefresh ##VERTREFRESH## -EndSection - -Section "Device" - ### Available Driver options are:- - ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", - ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" - ### [arg]: arg optional - #Option "DigitalVibrance" # <i> - #Option "PageFlip" # [<bool>] - #Option "Dac8Bit" # [<bool>] - #Option "NoLogo" # [<bool>] - #Option "Overlay" # [<bool>] - #Option "UBB" # [<bool>] - #Option "Stereo" # [<bool>] - #Option "BlueLine" # [<bool>] - #Option "WindowFlip" # [<bool>] - #Option "SWcursor" # [<bool>] - #Option "HWcursor" # [<bool>] - #Option "VideoKey" # <i> - #Option "NvAGP" # <i> - #Option "PixmapCacheLines" # <i> - #Option "IgnoreEDID" # [<bool>] - #Option "NoDDC" # [<bool>] - #Option "ConnectedMonitors" # <str> - #Option "TVStandard" # <str> - #Option "TVOutFormat" # <str> - #Option "NoRenderAccel" # [<bool>] - Option "CursorShadow" "1" # [<bool>] - #Option "CursorShadowAlpha" # <i> - #Option "CursorShadowXOffset" # <i> - #Option "CursorShadowYOffset" # <i> - #Option "UseEdidFreqs" # [<bool>] - #Option "FlatPanelProperties" # <str> - #Option "SecondMonitorHorizSync" # <str> - #Option "SecondMonitorVertRefresh" # <str> - #Option "UseInt10Module" # [<bool>] - #Option "SwapReady" # [<bool>] - #Option "NoTwinViewXineramaInfo" # [<bool>] - #Option "NoRenderExtension" # [<bool>] - Identifier "Card0" - Driver "nvidia" - VendorName "NVidia" -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Card0" - Monitor "Monitor0" - DefaultColorDepth 24 - SubSection "Display" - Modes "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" "512x384" - Depth 24 - ViewPort 0 0 - EndSubSection -EndSection - diff --git a/src/livecd/profiles/kde/XF86Config.xfree b/src/livecd/profiles/kde/XF86Config.xfree deleted file mode 100644 index 16a0718006..0000000000 --- a/src/livecd/profiles/kde/XF86Config.xfree +++ /dev/null @@ -1,126 +0,0 @@ -Section "dri" - Mode 0666 -EndSection - -# ********************************************************************** -# Module section -- this section is used to specify -# which dynamically loadable modules to load. -# ********************************************************************** -# -Section "Module" - -# This loads the DBE extension module. - - Load "dbe" # Double buffer extension - -# This loads the miscellaneous extensions module, and disables -# initialisation of the XFree86-DGA extension within that module. - SubSection "extmod" - Option "omit xfree86-dga" # don't initialise the DGA extension - EndSubSection - -# This loads the Type1 and FreeType font modules - Load "glx" - Load "type1" - Load "freetype" - -EndSection - -# ********************************************************************** -# Files section. This allows default font and rgb paths to be set -# ********************************************************************** - -Section "Files" - -# The location of the RGB database. Note, this is the name of the -# file minus the extension (like ".txt" or ".db"). There is normally -# no need to change the default. - - RgbPath "/usr/X11R6/lib/X11/rgb" - -# Multiple FontPath entries are allowed (which are concatenated together), -# as well as specifying multiple comma-separated entries in one FontPath -# command (or a combination of both methods) -# -# If you don't have a floating point coprocessor and emacs, Mosaic or other -# programs take long to start up, try moving the Type1 and Speedo directory -# to the end of this list (or comment them out). -# - - - FontPath "/usr/X11R6/lib/X11/fonts/local/" - FontPath "/usr/X11R6/lib/X11/fonts/misc/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" - FontPath "/usr/X11R6/lib/X11/fonts/Type1/" - FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" - -# The module search path. The default path is shown here. - - ModulePath "/usr/X11R6/lib/modules" - -EndSection - - -Section "InputDevice" - - Identifier "Keyboard1" - Driver "Keyboard" - Option "AutoRepeat" "500 30" - Option "XkbRules" "xfree86" - Option "XkbModel" "pc101" - Option "XkbLayout" "us" - -EndSection - -Section "InputDevice" - - Identifier "Mouse1" - Driver "mouse" - Option "Protocol" "##MOUSEPROTO##" - Option "ZAxisMapping" "4 5" - Option "Device" "##MOUSEDEV##" - -EndSection - -Section "Monitor" - Identifier "Monitor0" - HorizSync ##HORIZSYNC## - VertRefresh ##VERTREFRESH## -EndSection - -Section "Device" - Identifier "Vesa Graphics Adapter" - Driver "##DRIVER##" - Screen 0 -EndSection - -# ********************************************************************** -# Screen sections -# ********************************************************************** - -# Any number of screen sections may be present. Each describes -# the configuration of a single screen. A single specific screen section -# may be specified from the X server command line with the "-screen" -# option. -Section "Screen" - Identifier "Screen0" - Device "Vesa Graphics Adapter" - Monitor "Monitor0" - DefaultDepth 24 - - Subsection "Display" - Depth 24 - Modes "1024x768" - ViewPort 0 0 - EndSubsection -EndSection - -Section "ServerLayout" - Identifier "Server Layout" - Screen "Screen0" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection diff --git a/src/livecd/profiles/kde/aux-files/1024.initrd b/src/livecd/profiles/kde/aux-files/1024.initrd Binary files differdeleted file mode 100644 index ba0cf2b6d3..0000000000 --- a/src/livecd/profiles/kde/aux-files/1024.initrd +++ /dev/null diff --git a/src/livecd/profiles/kde/aux-files/aumix b/src/livecd/profiles/kde/aux-files/aumix deleted file mode 100644 index 88180194f0..0000000000 --- a/src/livecd/profiles/kde/aux-files/aumix +++ /dev/null @@ -1,44 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2003 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/kde/aux-files/Attic/aumix,v 1.1 2003/10/19 03:10:54 livewire Exp $ - -depend() { - need modules - use alsa -} - -checkconfig() { - if [ -z "`grep 'sound' /proc/devices`" ] && [ ! -d /proc/asound ] - then - eerror "Sound support has not been compiled into the kernel," - eerror "or is disabled. Please check that the correct modules" - eerror "is loaded." - return 1 - fi - # /dev/mixer can be a symlink - if [ ! -e /dev/mixer ] ; then - eerror "/dev/mixer do not exist, please create it, or load the" - eerror "correct modules to enable your card's mixer" - return 1 - fi -} - -start() { - checkconfig || return 1 - if [ -f /etc/aumixrc ] ; then - ebegin "Loading Mixer settings" - /usr/bin/aumix -f /etc/aumixrc -L >/dev/null 2>&1 - else - ebegin "Setting Mixer settings" - /usr/bin/aumix -v100 -c100 -w100 >/dev/null 2>&1 - fi - eend $? -} - -stop() { - checkconfig || return 1 - ebegin "Saving Mixer settings" - /usr/bin/aumix -f /etc/aumixrc -S >/dev/null 2>&1 - eend $? -} diff --git a/src/livecd/profiles/kde/aux-files/autoconfig b/src/livecd/profiles/kde/aux-files/autoconfig deleted file mode 100644 index d52266f8e7..0000000000 --- a/src/livecd/profiles/kde/aux-files/autoconfig +++ /dev/null @@ -1,182 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/kde/aux-files/Attic/autoconfig,v 1.1 2003/10/19 03:10:54 livewire Exp $ -echo "0" > /proc/sys/kernel/printk -DHCP="yes" -DETECT="yes" -PCMCIA="no" -HOTPLUG="yes" -APM="no" -ACPI="no" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "nodetect" ] - then - DETECT="no" - HOTPLUG="no" - APM="no" - ACPI="no" - fi -done -for x in $CMDLINE -do - if [ "$x" = "nodhcp" ] - then - DHCP="no" - fi -done -for x in $CMDLINE -do - if [ "$x" = "dopcmcia" ] - then - PCMCIA="yes" - fi -done -for x in $CMDLINE -do - if [ "$x" = "nohotplug" ] - then - HOTPLUG="no" - fi -done -for x in $CMDLINE -do - if [ "$x" = "noapm" ] - then - APM="no" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "acpi=on" ] - then - APM="no" - ACPI="yes" - fi -done - - -depend() { - after * -} - -start() { -if [ "$DETECT" = "yes" ] - then - ebegin $WARN"Hardware detection started" - PC=`awk -F: '/^processor/{printf "Processor"$2" is"};/^model name/{printf $2};/^vendor_id/{printf vendor};/^cpu MHz/{printf " %dMHz",int($2)};/^cache size/{printf ","$2" Cache"};/^$/{print ""}' /proc/cpuinfo 2>/dev/null` - ebegin $GOOD"$PC" - eend - hwsetup -p >/dev/null - eend - else - ebegin $WARN"Hardware detection disabled via cmdline$NORMAL" -fi - -if [ "$APM" = "no" ] - then - ebegin $GOOD"Not Loading APM Bios support.${NORMAL}" - else - insmod apm power_off=1 >/dev/null 2>&1 && ebegin $GOOD"APM BIOS found, power management functions enabled.$NORMAL" - /etc/init.d/apmd start - eend -fi - - -if [ "$ACPI" = "yes" ] - then - insmod processor >/dev/null 2>&1 && ebegin $GOOD ACPI power management functions enabled.$NORMAL - insmod fan >/dev/null - insmod thermal >/dev/null - insmod button >/dev/null - insmod battery >/dev/null - insmod ac >/dev/null - /etc/init.d/acpid start - eend -fi - -if [ "$PCMCIA" = "yes" ] - then - ebegin $HILITE "PCMCIA enabled via cmdline" - /etc/init.d/pcmcia start -fi - -if [ "$DHCP" = "no" ] - then - sed 's/iface_eth0="dhcp"/#iface_eth0="dhcp"/' /etc/conf.d/net > /etc/conf.d/net1 - cp /etc/conf.d/net1 /etc/conf.d/net - rm /etc/conf.d/net1 - ebegin $BAD"Skipping DHCP broadcast detection as requested on boot commandline." -fi - - #Read in what hwsetup has found -[ -f /etc/sysconfig/knoppix ] && . /etc/sysconfig/knoppix - -# Mouse -if [ -n "$MOUSE_DEVICE" ] - then - ebegin $GOOD"Mouse is $HILITE$MOUSE_FULLNAME$GOOD at $HILITE$MOUSE_DEVICE$NORMAL" - eend -fi - -if [ "$HOTPLUG" = "yes" ] - then - /etc/init.d/hotplug start - else - ebegin $BAD"Hotplug disabled via cmdline$NORMAL" -fi - -if [ "$DETECT" = "no" ] - then - DHCP="no" - -fi - -if [ "$DETECT" = "yes" ] - then - NETDEVICES="`awk -F: '/eth.:|tr.:/{print $1}' /proc/net/dev 2>/dev/null`" -fi - -if [ -n "$NETDEVICES" ] - then - ebegin $GOOD"Network device$HILITE$NETDEVICES$GOOD detected,$WARN DHCP broadcasting for IP.$NORMAL" - eend - else - ebegin $BAD"No Network device auto detected.$NORMAL" - -fi - - -if [ -n "$SOUND_FULLNAME" -o -n "$SOUND_DRIVER" ] - then - # Setting micro input to zero to avoid subsonic disaster - ebegin $GOOD"Soundcard:" - eend - aumix -m 0 >/dev/null 2>&1 - aumix -f /etc/aumixrc -L >/dev/null 2>&1 - aumix -v75 -c75 -w75 >/dev/null 2>&1 -# modprobe /dev/dsp - [ -n "$SOUND_FULLNAME" ] - ebegin " $WARN$SOUND_FULLNAME" - [ -n "$SOUND_DRIVER" ] - ebegin $WARN" driver = $SOUND_DRIVER"$HILITE -fi - - -if [ -n "$XDESC" -o -n "$XDESC" ] - then - ebegin $GOOD"VideoCard: $WARN ${XDESC}" - eend -fi - - -killall hwsetup 2>/dev/null -test -f /proc/splash && echo "show 65535" > /proc/splash -echo "6" > /proc/sys/kernel/printk -sleep 1 -echo off >/proc/splash -clear -} diff --git a/src/livecd/profiles/kde/aux-files/bootsplash-1024x768.cfg b/src/livecd/profiles/kde/aux-files/bootsplash-1024x768.cfg deleted file mode 100644 index ca47f2ad2e..0000000000 --- a/src/livecd/profiles/kde/aux-files/bootsplash-1024x768.cfg +++ /dev/null @@ -1,56 +0,0 @@ -# This is a bootsplash configuration file for -# theme SuSE, resolution 1024x768. See -# ftp://ftp.suse.com/pub/people/stepan/bootsplash for -# more information. Comments are welcome by stepan@suse.de - -# config file version -version=3 - -# should the picture be displayed? -state=1 - -# fgcolor is the text forground color. -# bgcolor is the text background (i.e. transparent) color. -fgcolor=7 -bgcolor=0 - -# (tx, ty) are the (x, y) coordinates of the text window in pixels. -# tw/th is the width/height of the text window in pixels. -tx=25 -ty=28 -tw=979 -th=649 - -# ttf message output parameters -text_x=312 -text_y=532 -text_size=18 -#text_color=0xeef4ff -text_color=-0x000000 -# name of the picture file (full path recommended) -jpeg=/etc/bootsplash/gentoo/images/bootsplash-1024x768.jpg -silentjpeg=/etc/bootsplash/gentoo/images/silent-1024x768.jpg - -progress_enable=1 - -# background -box silent noover 204 582 820 612 #04045498 -box silent inter 204 583 204 611 #ffffff #ffffff #526bb0 #526bb0 -box silent 204 583 820 611 #ffffff #ffffff #526bb0 #526bb0 -# black border -box silent 204 582 820 582 #313234 -box silent 204 612 820 612 #eef4ff -box silent 204 582 204 612 #313234 -box silent 820 582 820 612 #eef4ff - -# text box (left, top) -box 19 19 19 679 #313234 -box 19 19 1005 19 #313234 -# (right, bottom) -box 1005 19 1005 679 #eef4ff -box 19 679 1005 679 #eef4ff - -# box itself -box noover 20 20 1004 678 #04045498 - -overpaintok=1 diff --git a/src/livecd/profiles/kde/aux-files/checkfs b/src/livecd/profiles/kde/aux-files/checkfs deleted file mode 100644 index 671f89f1a5..0000000000 --- a/src/livecd/profiles/kde/aux-files/checkfs +++ /dev/null @@ -1,78 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/kde/aux-files/Attic/checkfs,v 1.1 2003/10/19 03:10:54 livewire Exp $ - - -depend() { - need checkroot modules -} - -start() { - # LVM support for /usr, /home, /opt .... - # This should be done *before* checking local - # volumes, or they never get checked. - - # NOTE: Add needed modules for LVM or RAID, etc - # to /etc/modules.autoload if needed - - if [ -x /sbin/vgscan -a -d /proc/lvm ] - then - ebegin "Setting up the Logical Volume Manager" - #still echo stderr for debugging - /sbin/vgscan >/dev/null - if [ "$?" -eq 0 ] && [ -x /sbin/vgchange -a -f /etc/lvmtab ] - then - /sbin/vgchange -a y >/dev/null - fi - eend $? "Failed to setup the LVM" - fi - - # Start software raid - if [ -x /sbin/raidstart -a -f /etc/raidtab -a -f /proc/mdstat ] - then - ebegin "Starting software RAID" - ACTIVE_RAID="`grep -E "md[0-9]+[[:space:]]?: active raid" /proc/mdstat | awk -F ':' '{print $1}'`" - if [ ! -z "${ACTIVE_RAID}" ] - then - for x in $(grep -E "raiddev /dev/md[0-9]+" /etc/raidtab | \ - awk '{print $2}' | grep -v "`echo ${ACTIVE_RAID} | sed s'/[[:space:]]//g'`") - do - /sbin/raidstart /dev/${x} - done - else - /sbin/raidstart --all - fi - eend $? "Failed to start software RAID" - fi - - if [ -f /fastboot ] - then - rm -f /fastboot - else - ebegin "Checking all filesystems" - if [ -f /forcefsck ] - then - ewarn "A full fsck has been forced" - fsck -C -R -A -a -f - rm -f /forcefsck - else - fsck -R -A -a >/dev/null 2>&1 - fi - if [ "$?" -eq 0 ] - then - eend 0 - elif [ "$?" -eq 1 ] - then - ewend 1 "Filesystem errors corrected." - #everything should be ok, so return a pass - return 0 - else - eend 2 "Fsck could not correct all errors, manual repair needed" - /sbin/sulogin ${CONSOLE} - fi - fi -} - - -# vim:ts=4 diff --git a/src/livecd/profiles/kde/aux-files/checkroot b/src/livecd/profiles/kde/aux-files/checkroot deleted file mode 100644 index ff84a9f735..0000000000 --- a/src/livecd/profiles/kde/aux-files/checkroot +++ /dev/null @@ -1,87 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/kde/aux-files/Attic/checkroot,v 1.1 2003/10/19 03:10:54 livewire Exp $ - - -depend() { - before * -} - -start() { - if [ ! -f /fastboot ] - then - ebegin "Remounting root filesystem read-only (if necessary)" - mount / -n -o remount,ro &>/dev/null - eend $? - - ebegin "Checking root filesystem" - if [ -f /forcefsck ] - then - ewarn "A full fsck has been forced" - ewarn "Skipping fsck; this is a livecd" -# fsck -C -f -a / - # /forcefsck isn't deleted because checkfs needs it. - # it'll be deleted in that script. - fi - if [ "$?" -eq 0 ] - then - eend 0 - elif [ "$?" -eq 1 ] - then - ewend 1 "Filesystem repaired" - else - eend 2 "Filesystem couldn't be fixed :(" - /sbin/sulogin ${CONSOLE} - /sbin/reboot -f - fi - fi - - ebegin "Remounting root filesystem read/write" - mount / -n -o remount,rw &>/dev/null - if [ "$?" -ne 0 ] - then - eend 2 "Root filesystem could not be mounted R/W :(" - /sbin/sulogin ${CONSOLE} - else - eend 0 - fi - - if [ "${BOOT}" = "yes" ] - then - # create /etc/mtab (done by forcing current mounted filesystems) - # NB: this needs to be updated if our /sbin/rc mounts change ... - > /etc/mtab - mount -f -o rw / &> /dev/null - mount -f /proc &> /dev/null - - # Remove stale backups - rm -f /etc/mtab~ /etc/mtab~~ - - # should /dev be mounted ? - if ! get_bootparam "nodevfs" && [ -e /dev/.devfsd ] - then - mount -f -t devfs none /dev &> /dev/null - fi - - # should we mount a ramdisk or tmpfs? - if ! get_bootparam "notmpfs" - then - # using tmpfs - mount -f -t tmpfs tmpfs ${svcdir} \ - -o rw,mode=0644,size=${svcsize}k &> /dev/null - else - # using a ramdisk - mount -f -t ext2 /dev/ram0 ${svcdir} -o rw &> /dev/null - fi - - if ! get_bootparam "notmpfs" && get_bootparam "ngpt" - then - # POSIX shared memory support - mount -f /dev/shm &> /dev/null - fi - fi -} - - -# vim:ts=4 diff --git a/src/livecd/profiles/kde/aux-files/depscan.sh b/src/livecd/profiles/kde/aux-files/depscan.sh deleted file mode 100644 index d1ab93e863..0000000000 --- a/src/livecd/profiles/kde/aux-files/depscan.sh +++ /dev/null @@ -1,41 +0,0 @@ -#!/bin/bash -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# Author: Martin Schlemmer <azarah@gentoo.org> -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/kde/aux-files/Attic/depscan.sh,v 1.1 2003/10/19 03:10:54 livewire Exp $ - -source /etc/init.d/functions.sh - -ebegin "Caching service dependencies" - - -lookbusy() { - local type - type=${1}; shift - for i in "$@" - do echo -n $GOOD" * Loading Services" $i;echo -n -e "\r"; - usleep 600000 ; -done -echo $WARN" * Loading Services 100%" -echo -n $NORMAL -} - -lookbusy '10%' '20%' '30%' '40%' '50%' '60%' '70%' '80%' '90%' '100%' - -/bin/gawk -v SVCDIR="${svcdir}" \ - -f /lib/rcscripts/awk/functions.awk \ - -f /lib/rcscripts/awk/cachedepends.awk - -cd /etc/init.d - -bash ${svcdir}/depcache | \ - /bin/gawk -v SVCDIR="${svcdir}" \ - -v DEPTYPES="${deptypes}" \ - -v ORDTYPES="${ordtypes}" \ - -f /lib/rcscripts/awk/functions.awk \ - -f /lib/rcscripts/awk/gendepends.awk - -eend $? "Failed to cache service dependencies" - - -# vim:ts=4 diff --git a/src/livecd/profiles/kde/aux-files/fbresolution b/src/livecd/profiles/kde/aux-files/fbresolution Binary files differdeleted file mode 100644 index cc077dab18..0000000000 --- a/src/livecd/profiles/kde/aux-files/fbresolution +++ /dev/null diff --git a/src/livecd/profiles/kde/aux-files/fbtruetype.static b/src/livecd/profiles/kde/aux-files/fbtruetype.static Binary files differdeleted file mode 100644 index c2b9654f9e..0000000000 --- a/src/livecd/profiles/kde/aux-files/fbtruetype.static +++ /dev/null diff --git a/src/livecd/profiles/kde/aux-files/freeramdisk.c b/src/livecd/profiles/kde/aux-files/freeramdisk.c deleted file mode 100644 index da82fba115..0000000000 --- a/src/livecd/profiles/kde/aux-files/freeramdisk.c +++ /dev/null @@ -1,32 +0,0 @@ -#include <stdio.h> -#include <string.h> -#include <sys/mount.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <fcntl.h> -#include <sys/ioctl.h> -#include <errno.h> - -main(int argc, char **argv) -{ - char rname[256]="/dev/ram"; - char b[256]; - int f; - if (argv[1]) strcpy(rname,argv[1]); - -#if 0 /* don't use on a living system, /etc/mtab is not updated */ - if (umount(rname) && (errno != ENOENT)) { - sprintf(b,"freeramdisk: cannot umount %s %d",rname,errno); - perror(b); - exit(1); - } -#endif - - if ((f=open(rname,O_RDWR)) == -1) { - sprintf(b,"freeramdisk: cannot open %s",rname); - perror(b); - exit(1); - } - ioctl(f,BLKFLSBUF); - close(f); -} diff --git a/src/livecd/profiles/kde/aux-files/fstab b/src/livecd/profiles/kde/aux-files/fstab deleted file mode 100644 index 23f30347a1..0000000000 --- a/src/livecd/profiles/kde/aux-files/fstab +++ /dev/null @@ -1,8 +0,0 @@ -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/kde/aux-files/Attic/fstab,v 1.1 2003/10/19 03:10:54 livewire Exp $ - -# /etc/fstab: static file system information. -proc /proc proc defaults 0 0 -tmpfs /dev/shm tmpfs defaults 0 0 -tmpfs /lib/dev-state tmpfs defaults 0 0 diff --git a/src/livecd/profiles/kde/aux-files/functions.sh b/src/livecd/profiles/kde/aux-files/functions.sh deleted file mode 100644 index 81f2bdbc97..0000000000 --- a/src/livecd/profiles/kde/aux-files/functions.sh +++ /dev/null @@ -1,568 +0,0 @@ -# Copyright 1999-2003 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/kde/aux-files/Attic/functions.sh,v 1.1 2003/10/19 03:10:54 livewire Exp $ - -umask 022 - -if [ -z "${EBUILD}" ] -then - # Setup a basic $PATH. Just add system default to existing. - # This should solve both /sbin and /usr/sbin not present when - # doing 'su -c foo', or for something like: PATH= rcscript start - PATH="/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/sbin:${PATH}" -fi - -# daemontools dir -SVCDIR="/var/lib/supervise" - -# Check /etc/conf.d/rc for a description of these ... -svcdir="/var/lib/init.d" -svcmount="no" -svcfstype="tmpfs" -svcsize=1024 -shmdir="/mnt/.shm" - -# Different types of dependencies -deptypes="need use" -# Different types of order deps -ordtypes="before after" - -# -# Internal variables -# - -# Dont output to stdout? -RC_QUIET_STDOUT="no" - -# Should we use color? -RC_NOCOLOR="no" - -# -# Default values for rc system -# -RC_NET_STRICT_CHECKING="no" - -# Override defaults with user settings ... -[ -f /etc/conf.d/rc ] && source /etc/conf.d/rc - - -getcols() { - echo "$2" -} - -# Should we use colors ? -if [ -n "${EBUILD}" ] && [ "${*/depend}" = "$*" ] -then - # Check user pref in portage - RC_NOCOLOR="`python -c 'import portage; print portage.settings["NOCOLOR"]' 2> /dev/null`" - -elif [ -n "${EBUILD}" ] && [ "${*/depend}" != "$*" ] -then - # We do not want colors or stty to run during emerge depend - RC_NOCOLOR="yes" - -elif [ "`/bin/consoletype 2> /dev/null`" = "serial" ] -then - # We do not want colors on serial terminals - RC_NOCOLOR="yes" -else - # Lastly check if the user disabled it with --nocolor argument - for arg in $* - do - case "${arg}" in - --nocolor) - RC_NOCOLOR="yes" - ;; - esac - done -fi - -if [ "${RC_NOCOLOR}" = "yes" ] -then - COLS="25 80" - ENDCOL= - - if [ -n "${EBUILD}" ] && [ "${*/depend}" = "$*" ] - then - stty cols 80 &>/dev/null - stty rows 25 &>/dev/null - fi -else - COLS="`stty size 2> /dev/null`" - COLS="`getcols ${COLS}`" - COLS=$((${COLS} - 7)) - ENDCOL=$'\e[A\e['${COLS}'G' # Now, ${ENDCOL} will move us to the end of the - # column; irregardless of character width -fi - -if [ "${RC_NOCOLOR}" = "yes" ] -then - GOOD="" - WARN="" - BAD="" - NORMAL="" - - HILITE="" - BRACKET="" -else - GOOD=$'\e[32;01m' - WARN=$'\e[33;01m' - BAD=$'\e[31;01m' - NORMAL=$'\e[0m' - - HILITE=$'\e[36;01m' - BRACKET=$'\e[34;01m' -fi - -# void esyslog(char* priority, char* tag, char* message) -# -# use the system logger to log a message -# -esyslog() { - if [ -x /usr/bin/logger ] - then - pri="$1" - tag="$2" - - shift 2 - [ -z "$*" ] && return 0 - - /usr/bin/logger -p "${pri}" -t "${tag}" -- "$*" - fi -} - -# void einfo(char* message) -# -# show an informative message (with a newline) -# -einfo() { - if [ "${RC_QUIET_STDOUT}" = "yes" ] - then - return - else - echo -e " ${GOOD}*${NORMAL} ${*}" - fi -} - -# void einfon(char* message) -# -# show an informative message (without a newline) -# -einfon() { - if [ "${RC_QUIET_STDOUT}" = "yes" ] - then - return - else - echo -ne " ${GOOD}*${NORMAL} ${*}" - fi -} - -# void ewarn(char* message) -# -# show a warning message + log it -# -ewarn() { - if [ "${RC_QUIET_STDOUT}" = "yes" ] - then - echo " ${*}" - else - echo -e " ${WARN}*${NORMAL} ${*}" - fi - - # Log warnings to system log - esyslog "daemon.warning" "rc-scripts" "${*}" -} - -# void eerror(char* message) -# -# show an error message + log it -# -eerror() { - if [ "${RC_QUIET_STDOUT}" = "yes" ] - then - echo " ${*}" >/dev/stderr - else - echo -e " ${BAD}*${NORMAL} ${*}" - fi - - # Log errors to system log - esyslog "daemon.err" "rc-scripts" "${*}" -} - -# void ebegin(char* message) -# -# show a message indicating the start of a process -# -ebegin() { - if [ "${RC_QUIET_STDOUT}" = "yes" ] - then - return - else - if [ "${RC_NOCOLOR}" = "yes" ] - then - echo -ne " ${GOOD}*${NORMAL} ${*}..." - else - echo -e " ${GOOD}*${NORMAL} ${*}..." - fi - fi -} - -# void eend(int error, char* errstr) -# -# indicate the completion of process -# if error, show errstr via eerror -# -eend() { - if [ "$#" -eq 0 ] || ([ -n "$1" ] && [ "$1" -eq 0 ]) - then - if [ "${RC_QUIET_STDOUT}" != "yes" ] - then - echo -e "${ENDCOL} ${BRACKET}[ ${GOOD}ok${BRACKET} ]${NORMAL}" - fi - else - local retval="$1" - if [ "$#" -ge 2 ] - then - shift - eerror "${*}" - fi - if [ "${RC_QUIET_STDOUT}" != "yes" ] - then - echo -e "${ENDCOL} ${BRACKET}[ ${BAD}!!${BRACKET} ]${NORMAL}" - # extra spacing makes it easier to read - echo - fi - return ${retval} - fi -} - -# void ewend(int error, char *warnstr) -# -# indicate the completion of process -# if error, show warnstr via ewarn -# -ewend() { - if [ "$#" -eq 0 ] || ([ -n "$1" ] && [ "$1" -eq 0 ]) - then - if [ "${RC_QUIET_STDOUT}" != "yes" ] - then - echo -e "${ENDCOL} ${BRACKET}[ ${GOOD}ok${BRACKET} ]${NORMAL}" - fi - else - local retval="$1" - if [ "$#" -ge 2 ] - then - shift - ewarn "${*}" - fi - if [ "${RC_QUIET_STDOUT}" != "yes" ] - then - echo -e "${ENDCOL} ${BRACKET}[ ${WARN}!!${BRACKET} ]${NORMAL}" - # extra spacing makes it easier to read - echo - fi - return "${retval}" - fi -} - -# bool wrap_rcscript(full_path_and_name_of_rc-script) -# -# check to see if a given rc-script has syntax errors -# zero == no errors -# nonzero == errors -# -wrap_rcscript() { - local retval=1 - - ( echo "function test_script() {" ; cat "$1"; echo "}" ) > "${svcdir}/foo.sh" - - if source "${svcdir}/foo.sh" &> /dev/null - then - test_script &> /dev/null - retval=0 - fi - rm -f "${svcdir}/foo.sh" - return "${retval}" -} - -# int checkserver(void) -# -# Return 0 (no error) if this script is executed -# onto the server, one otherwise. -# See the boot section of /sbin/rc for more details. -# -checkserver() { - # Only do check if 'gentoo=adelie' is given as kernel param - if get_bootparam "adelie" - then - [ "`cat ${svcdir}/hostname`" = "(none)" ] || return 1 - fi - - return 0 -} - -# void init_node(void) -# -# Initialize an Adelie node. -# -init_node() { - ebegin "Importing local userspace on node" - - try mount -t tmpfs none "${shmdir}" - - for DIR in /etc /var /root - do - - if grep -q -v "^${DIR}[[:space:]]" /etc/exports - then - mount -o nolock -n server:"${DIR}" "${DIR}" - fi - - if [ -e "/etc/conf.d/exclude/${DIR}" ] - then - find "${DIR}/" -type d | grep -v -f "/etc/conf.d/exclude/${DIR}" \ - > "${shmdir}/${DIR}.lst" - else - find "${DIR}/" -type d > "${shmdir}/${DIR}.lst" - fi - - for SUBDIR in `cat ${shmdir}/${DIR}.lst` - do - mkdir -p "${shmdir}/${SUBDIR}" - chmod --reference="${SUBDIR}" "${shmdir}/${SUBDIR}" - cp -dp "${SUBDIR}"/* "${shmdir}/${SUBDIR}" &> /dev/null - done - - if [ -e "/etc/conf.d/exclude/${DIR}" ] - then - for EMPTYDIR in `cat "/etc/conf.d/exclude/${DIR}"` - do - mkdir -p "${shmdir}/${EMPTYDIR}" - chmod --reference="${SUBDIR}" "${shmdir}/${SUBDIR}" - done - fi - - umount -n "${DIR}" > /dev/null - mount -n -o bind "${shmdir}/${DIR}" "${DIR}" - done - - mkdir -p "${shmdir}/tmp" - chmod 0777 "${shmdir}/tmp" - mount -n -o bind "${shmdir}/tmp" /tmp - - cat /proc/mounts > /etc/mtab - - cp -f /etc/inittab.node /etc/inittab - [ -e /etc/fstab.node ] && cp -f /etc/fstab.node /etc/fstab - killall -1 init - - eend 0 -} - -# char *KV_major(string) -# -# Return the Major version part of given kernel version. -# -KV_major() { - [ -z "$1" ] && return 1 - - local KV="`echo $1 | \ - awk '{ tmp = $0; gsub(/^[0-9\.]*/, "", tmp); sub(tmp, ""); print }'`" - echo "${KV}" | awk -- 'BEGIN { FS = "." } { print $1 }' -} - -# char *KV_minor(string) -# -# Return the Minor version part of given kernel version. -# -KV_minor() { - [ -z "$1" ] && return 1 - - local KV="`echo $1 | \ - awk '{ tmp = $0; gsub(/^[0-9\.]*/, "", tmp); sub(tmp, ""); print }'`" - echo "${KV}" | awk -- 'BEGIN { FS = "." } { print $2 }' -} - -# char *KV_micro(string) -# -# Return the Micro version part of given kernel version. -# -KV_micro() { - [ -z "$1" ] && return 1 - - local KV="`echo $1 | \ - awk '{ tmp = $0; gsub(/^[0-9\.]*/, "", tmp); sub(tmp, ""); print }'`" - echo "${KV}" | awk -- 'BEGIN { FS = "." } { print $3 }' -} - -# int KV_to_int(string) -# -# Convert a string type kernel version (2.4.0) to an int (132096) -# for easy compairing or versions ... -# -KV_to_int() { - [ -z "$1" ] && return 1 - - local KV_MAJOR="`KV_major "$1"`" - local KV_MINOR="`KV_minor "$1"`" - local KV_MICRO="`KV_micro "$1"`" - local KV_int="$((KV_MAJOR * 65536 + KV_MINOR * 256 + KV_MICRO))" - - # We make version 2.2.0 the minimum version we will handle as - # a sanity check ... if its less, we fail ... - if [ "${KV_int}" -ge 131584 ] - then - echo "${KV_int}" - - return 0 - else - return 1 - fi -} - -# int get_KV() -# -# return the kernel version (major, minor and micro concated) as an integer -# -get_KV() { - local KV="`uname -r 2> /dev/null`" - - echo "`KV_to_int ${KV}`" - - return $? -} - -# bool get_bootparam(param) -# -# return 0 if gentoo=param was passed to the kernel -# -# EXAMPLE: if get_bootparam "nodevfs" ; then .... -# -get_bootparam() { - local copt="" - local parms="" - local retval=1 - - for copt in `cat /proc/cmdline` - do - if [ "${copt%=*}" = "gentoo" ] - then - params="`gawk -v PARAMS="${copt##*=}" ' - BEGIN { - split(PARAMS, nodes, ",") - for (x in nodes) - print nodes[x] - }'`" - - # Parse gentoo option - for x in ${params} - do - if [ "${x}" = "$1" ] - then - echo YES - retval=0 - fi - done - fi - done - return ${retval} -} - -# Safer way to list the contents of a directory, -# as it do not have the "empty dir bug". -# -# char *dolisting(param) -# -# print a list of the directory contents -# -# NOTE: quote the params if they contain globs. -# also, error checking is not that extensive ... -# -dolisting() { - local x="" - local y="" - local tmpstr="" - local mylist="" - local mypath="${*}" - - if [ "${mypath%/\*}" != "${mypath}" ] - then - mypath="${mypath%/\*}" - fi - for x in ${mypath} - do - if [ ! -e ${x} ] - then - continue - fi - if [ ! -d ${x} ] && ( [ -L ${x} -o -f ${x} ] ) - then - mylist="${mylist} `ls ${x} 2> /dev/null`" - else - if [ "${x%/}" != "${x}" ] - then - x="${x%/}" - fi - cd ${x} - tmpstr="`ls`" - for y in ${tmpstr} - do - mylist="${mylist} ${x}/${y}" - done - fi - done - echo "${mylist}" -} - -# void save_options(char *option, char *optstring) -# -# save the settings ("optstring") for "option" -# -save_options() { - local myopts="$1" - shift - if [ ! -d ${svcdir}/options/${myservice} ] - then - install -d -m0755 ${svcdir}/options/${myservice} - fi - echo "$*" > ${svcdir}/options/${myservice}/${myopts} -} - -# char *get_options(char *option) -# -# get the "optstring" for "option" that was saved -# by calling the save_options function -# -get_options() { - if [ -f ${svcdir}/options/${myservice}/$1 ] - then - cat ${svcdir}/options/${myservice}/$1 - fi -} - -# Prelim code to add bootsplash support to Gentoo :) -rc_splash() { - test -f /proc/splash || return 0 - if [ -n "`grep 'splash=silent' /proc/cmdline 2>/dev/null`" ]; then - /sbin/splash "$1" - export progress=$(( ${progress} + 1 )) - fi -} - -# Allows us to save variable info between runlevels (ie. rc iterations) -save_splash_info() { - if [ -f /proc/splash ]; then - echo ${sscripts} > ${svcdir}/sscripts.tmp - echo ${progress} > ${svcdir}/progress.tmp - fi -} - -# Retrieve splash state info -get_splash_info() { - if [ -f /proc/splash ]; then - export sscripts=`cat ${svcdir}/sscripts.tmp` - export progress=`cat ${svcdir}/progress.tmp` - fi -} - -# vim:ts=4 diff --git a/src/livecd/profiles/kde/aux-files/gentoo_default_blue.jpg b/src/livecd/profiles/kde/aux-files/gentoo_default_blue.jpg Binary files differdeleted file mode 100644 index e94b8780b8..0000000000 --- a/src/livecd/profiles/kde/aux-files/gentoo_default_blue.jpg +++ /dev/null diff --git a/src/livecd/profiles/kde/aux-files/hosts b/src/livecd/profiles/kde/aux-files/hosts deleted file mode 100644 index 4da3032548..0000000000 --- a/src/livecd/profiles/kde/aux-files/hosts +++ /dev/null @@ -1,11 +0,0 @@ -# -# hosts This file describes a number of hostname-to-address -# mappings for the TCP/IP subsystem. It is mostly -# used at boot time, when no name servers are running. -# On small systems, this file can be used instead of a -# "named" name server. Just add the names, addresses -# and any aliases to this file... -# - -127.0.0.1 localhost -192.168.1.2 cdimage diff --git a/src/livecd/profiles/kde/aux-files/hotplug b/src/livecd/profiles/kde/aux-files/hotplug deleted file mode 100644 index dddcfb0084..0000000000 --- a/src/livecd/profiles/kde/aux-files/hotplug +++ /dev/null @@ -1,54 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2003 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# /space/gentoo/cvsroot/gentoo-x86/sys-apps/hotplug/files/hotplug.rc,v 1.2 2002/02/25 23:02:14 woodchip Exp - -HILITE="\033[1m" -NORMAL="\033[0m" - -depend() { - need modules -} - -checkconfig() { - if [ ! -d /etc/hotplug ] ; then - eerror "Hotplug requires scripts & configs in /etc/hotplug!" - return 1 - fi -} - -start() { - CMDLINE="`cat /proc/cmdline`" - for x in $CMDLINE - do - if [ "$x" = "nodetect" ] - then - ebegin "Skipping USB and PCI hotplugging (nodetect option)" - return 0 - elif [ "$x" = "nohotplug" ] - then - ebegin "Skipping USB and PCI hotplugging (nohotplug option)" - return 0 - fi - done - local error - checkconfig || return 1 - ebegin "Starting USB and PCI hotplugging" - echo "0" > /proc/sys/kernel/printk - for RC in /etc/hotplug/*.rc - do - $RC start > /dev/null 2>&1 - done - echo "6" > /proc/sys/kernel/printk - eend -} - -stop() { - local error - ebegin "Stopping USB and PCI hotplugging" - for RC in /etc/hotplug/*.rc - do - $RC stop - done - eend -} diff --git a/src/livecd/profiles/kde/aux-files/hwsetup b/src/livecd/profiles/kde/aux-files/hwsetup deleted file mode 100644 index d611d6c7ee..0000000000 --- a/src/livecd/profiles/kde/aux-files/hwsetup +++ /dev/null @@ -1,49 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/kde/aux-files/Attic/hwsetup,v 1.1 2003/10/19 03:10:54 livewire Exp $ - -HILITE="\033[1m" -NORMAL="\033[0m" - -DETECT="yes" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "nodetect" ] - then - DETECT="no" - fi -done - -depend() { - after checkfs - after local -} - -blurb() { - echo -ne ${HILITE}${1} - #blurblen=${#1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} -start() { - ebegin "Hardware detection" - -if [ "$DETECT" = "yes" ] - then - # Disable kernel messages to console: - echo "0" > /proc/sys/kernel/printk - /etc/init.d/autoconfig - eend - fi - -} - -stop() { - return -} - -# vim:ts=4 diff --git a/src/livecd/profiles/kde/aux-files/inittab b/src/livecd/profiles/kde/aux-files/inittab deleted file mode 100644 index 2dfc9aea88..0000000000 --- a/src/livecd/profiles/kde/aux-files/inittab +++ /dev/null @@ -1,47 +0,0 @@ -# -# inittab This file describes how the INIT process should set up -# the system in a certain run-level. -# -# Author: Miquel van Smoorenburg, <miquels@cistron.nl> -# Modified by: Patrick J. Volkerding, <volkerdi@ftp.cdrom.com> -# Modified by: Daniel Robbins, <drobbins@gentoo.org> -# -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/kde/aux-files/Attic/inittab,v 1.1 2003/10/19 03:10:54 livewire Exp $ - -# -# Default runlevel. - -id:3:initdefault: - -# System initialization (runs when system boots). -#DE:S12345:respawn:/sbin/devfsd /dev -fg -# Script to run when going single user (runlevel 1). -~~:S:wait:/sbin/sulogin - -si:S:sysinit:/sbin/rc sysinit -l0:0:wait:/sbin/rc shutdown -l1:1:wait:/sbin/rc single -l2:2:wait:/sbin/rc nonetwork -l3:3:wait:/sbin/rc default -l4:4:wait:/sbin/rc default -l5:5:wait:/sbin/rc default -l6:6:wait:/sbin/rc reboot -z6:6:respawn:/sbin/sulogin - -# TERMINALS -c1:12345:respawn:/sbin/mingetty --noclear --autologin root tty1 -c2:12345:respawn:/sbin/mingetty --noclear --autologin root tty2 -c3:12345:respawn:/sbin/mingetty --noclear --autologin root tty3 -c4:12345:respawn:/sbin/mingetty --noclear --autologin root tty4 - -# What to do at the "Three Finger Salute". -ca:12345:ctrlaltdel:/sbin/shutdown -r now - -# Used by /etc/init.d/xdm to control DM startup. -# Read the comments in /etc/init.d/xdm for more -# info. Do NOT remove, as this will start nothing -# extra at boot if /etc/init.d/xdm is not added -# to the "default" runlevel. -x:a:once:/etc/X11/startDM.sh - -# End of /etc/inittab diff --git a/src/livecd/profiles/kde/aux-files/install.txt b/src/livecd/profiles/kde/aux-files/install.txt deleted file mode 100644 index c6df3c24af..0000000000 --- a/src/livecd/profiles/kde/aux-files/install.txt +++ /dev/null @@ -1,1482 +0,0 @@ - - Gentoo Linux 1.4_rc2 and 1.4_rc3 Installation Instructions - Contents: - [1. About the Install................................................. - .................] - - 1.About the Install - - This new boot CD will boot from nearly any modern IDE CD-ROM drive, as - well as many SCSI CD-ROM, assuming that your CD-ROM and BIOS both - support booting. Included on the CD-ROM is Linux support for IDE (and - PCI IDE) (built-in to the kernel) as well as support for all SCSI - devices (available as modules.) In addition, we provide modules for - literally every kind of network card that Linux supports, as well as - tools to allow you to configure your network and establish outbound - (as well as inbound) ssh connections and download files. - - To install from the build CD, you will need to have a 486+ processor - and ideally at least 64 Megabytes of RAM. (Gentoo Linux has been - successfully built with 64MB of RAM + 64MB of swap space, but the - build process is awfully slow under those conditions.) - - Gentoo Linux can be installed using one of three "stage" tarball - files. The one you choose depends on how much of the system you want - to compile yourself. The stage1 tarball is used when one wants to - bootstrap and build the entire system from scratch. The stage2 tarball - is used for building the entire system from scratch, except for the - bootstrap part which is already performed for you. And the stage3 - tarball already contains a basic Gentoo Linux system that has been - optimized for your system. - - So, how does one begin the install process? First, you'll want to - decide which one of our LiveCD ISO images to grab from - [3]http://www.ibiblio.org/gentoo/releases/1.4_rc2/x86/. In this - directory, you'll see several subdirectories such as athlon for each - of our various architecture-specific builds. Here's a low-down on each - arch directory and what it contains: - Architecture Description - x86 Stage 1 tarballs and "gentoo-basic" liveCD -- will work on - anything. - i586 Stage 2 and 3 tarballs, GRP packages and liveCD for i586+ CPUs - i686 Stage 2 and 3 tarballs, GRP packages and liveCD for i686+ CPUs - athlon Stage 2 and 3 tarballs, GRP packages and liveCD for AMD Athlon - CPUs - athlon-xp Stage 2 and 3 tarballs, GRP packages and liveCD for AMD - Athlon XP CPUs - athlon-mp Stage 2 and 3 tarballs, GRP packages and liveCD for AMD - Athlon MP CPUs - pentium3 Stage 2 and 3 tarballs, GRP packages and liveCD for Intel - Pentium III and Pentium 4 CPUs - - Inside each of these directories, you'll find a livecd/ directory that - contains LiveCDs. While these LiveCDs will boot on any architecture, - the install-related tarballs are optimized for a particular CPU type - and will not work on all systems, except for the "gentoo-basic" LiveCD - in the x86 directory which can be used to install on anything. - - The LiveCDs are full CD images that should be burned to a CDR or CD-RW - using CD burning software. Currently, we have two types of LiveCDs. - The first carries the "gentoo-basic" label, and is approximately 40MB - in size and lives in the x86/livecd/ directory. This LiveCD is of - minimal size to allow for a initial quick download and contains a - stage1 tarball that can be found in /mnt/cdrom/gentoo/ after the CD - has booted. - - The second flavor of LiveCD we currently offer is labelled - "livecd-grp." These CDs (found in their respective arch/livecd - directories) contain stage1, 2 and 3 tarballs, and also contain a set - of GRP packages optimized for a specific architecture. GRP is simply - precompiled packages for very large applications, such as XFree86. - KDE, GNOME, OpenOffice, etc. Using these LiveCDs, it will be possible - for you to install a fully-functional Gentoo Linux system very - quickly. The downside is that these ISO images are large -- around - 600MB -- so they can take a while to download. - If for some reason your install gets interrupted at some point, you - can reboot and restart. For example, if you have partitioned, - installed the stageX tarball, and are ready to chroot, you can restart - the install if necessary. Just re-boot with the LiveCD, then mount - your drives/partitions to /mnt as normal. Basically, you can do this - at about any point during the install, just not before partitioning - for obvious reasons. - - Warning: If you encounter a problem with any part of the install and - wish to report it as a bug, report it to [4]http://bugs.gentoo.org. If - the bug needs to be moved upstream to the package maintainers (ie KDE) - the developers will take care of that. - - Now, let's quickly review the install process. First, we'll download, - burn and boot a LiveCD. After getting a root prompt, we'll create - partitions, create our filesystems, and extract either a stage1, - stage2 or stage3 tarball. If we are using a stage1 or stage2 tarball, - we will take the appropriate steps to get our systems to stage3. Once - our systems are at stage3, we can configure them (tweaking config - files, installing a bootloader, etc) and boot them and have a - fully-functional Gentoo Linux system. Depending on what stage of the - build process you're starting from, here's what's required for - installation: - stage tarball requirements for installation - 1 partition/filesystem setup, emerge sync, bootstrap, emerge system, - emerge linux sources, final configuration - 2 partition/filesystem setup, emerge sync, emerge system, emerge linux - sources, final configuration - 3 partition/filesystem setup, emerge sync, final configuration - - 2.Booting - - Start by booting the LiveCD. If detected properly, you should see a - fancy boot screen with the Gentoo Linux logo on it. At this screen, - you can hit Enter to begin the boot process, hit F2 for help, or pass - kernel boot options by typing gentoo opt1 opt2, etc. Once you hit - Enter, you'll be greeted with a lot of text output followed by the - normal Gentoo Linux boot sequence. You will be automatically logged in - as "root" and the root password will be set to a random string for - security purposes. You should have a root ("#") prompt on the current - console, and can also open new root consoles by pressing Alt-F2, - Alt-F3 and Alt-F4. Get back to the one you started on by pressing (you - guessed it) Alt-F1. - - You've probably also noticed that above your # prompt is a bunch of - help text explaining how to do things like configure your network - devices and where you can find the Gentoo Linux stage tarballs and - packages on your CD. - - 3.Load Kernel Modules - - If the PCI autodetection missed some of your hardware, you will have - to load the appropriate modules manually. To view a list of all - available network card modules, type ls - /lib/modules/*/kernel/drivers/net/*. To load a particular module, - type: - - Code listing 3.1: PCI Modules Configuration -# modprobe pcnet32 -(replace pcnet32 with your NIC module) - - Now, if you want to be able to access any SCSI hardware that wasn't - detected during the initial boot autodetection process, you'll need to - load the appropriate modules from /lib/modules, again using modprobe: - - Code listing 3.2: Loading SCSI Modules -# modprobe aic7xxx -# modprobe sd_mod - - aic7xxx supports your SCSI controller and sd_mod supports SCSI hard - disks. - - Note: Support for a SCSI CD-ROMs and disks are built-in in the kernel. - - If you are using hardware RAID, you'll need to load the ATA-RAID - modules for your RAID controller. - - Code listing 3.3: Loading RAID Modules - -# modprobe ataraid -# modprobe pdcraid - (Promise Raid Controller) -# modprobe hptraid - (Highpoint Raid Controller) - - The Gentoo LiveCD should have enabled DMA on your disks, but if it did - not, hdparm can be used to set DMA on your drives. - - Code listing 3.4: Setting DMA -Replace hdX with your disk device. -# hdparm -d 1 /dev/hdX Enables DMA -# hdparm -d1 -A1 -m16 -u1 -a64 /dev/hdX Enables DMA and other safe performance- -enhancing options -# hdparm -X66 /dev/hdX Force-enables Ultra-DMA -- dangerous -- may cause some d -rives to mess up - - 4.Loading PCMCIA Kernel Modules - - If you have a PCMCIA network card, you will need to do some additional - trickery. - - Warning: To avoid problems with cardmgr, you must run it before you - enter the chroot portion of the install. - - Code listing 4.1: Loading PCMCIA Modules -# modprobe pcmcia_core -# modprobe i82365 -# modprobe ds -# cardmgr -f - - As cardmgr detects which hardware is present, your speaker should emit - a few reassuring beeps, and your PCMCIA network card should hum to - life. You can of course insert the PCMCIA card after loading cardmgr - too, if that's preferable. (Technically, you need not run cardmgr if - you know exactly which module your PCMCIA card requires. But if you - don't, loading all PCMCIA modules and see which sticks won't work, as - all PCMCIA modules load obligingly and hang around for a PCMCIA card - to drop by. cardmgr will also unload the module(s) for any card when - you remove it). - - 5.Configuring Networking - - PPPoE configuration - - Assuming you need PPPoE to connect to the internet, the livecd (any - version) has made things easy for you by including rp-pppoe. Use the - provided adsl-setup script to configure your connection. You will be - prompted for the ethernet device that is connected to your adsl modem, - your username and password, the IPs of your DNS servers, and if you - need a basic firewall or not. - - Code listing 5.1: Configuring PPPoE -# adsl-setup -# adsl-start - - If something goes wrong, double-check that you correctly typed your - username and password by looking at /etc/ppp/pap-secrets or - /etc/ppp/chap-secrets, and make sure you are using the right ethernet - device. - - Automatic Network Configuration - - The Gentoo Linux install lets you configure a working network, - allowing you to use ssh, scp, lynx, irssi or wget as needed before - even beginning the installation process. Even if you don't need to do - these things now, you should go ahead and set up networking now. Once - networking is up, Portage will be able to use your configured network - once you are inside the chroot environment (required for installing - Gentoo Linux). The simplest way to set up networking is to run our new - net-setup script. - - Code listing 5.2: Net-Setup Script - # net-setup eth0 - - Of course, if you prefer, you may still set up networking manually. - - Manual DHCP Configuration - - Network configuration is simple with DHCP; If your ISP is not using - DHCP, skip down to the static configuration section below. - - Code listing 5.3: Network configuration with DHCP - # dhcpcd eth0 - - Note: Some ISPs require you to provide a hostname. To do that, add a - -h myhostname flag to the dhcpcd command line above. - - If you receive dhcpConfig warnings, don't panic; the errors are most - likely cosmetic. Skip down to Network testing below. - - Manual Static Configuration - - We need to setup just enough networking so that we can download - sources for the system build, as well as the required localhost - interface. Type in the following commands, replacing $IFACE with your - network interface (typically eth0), $IPNUM with your IP address, - $BCAST with your broadcast address, and $NMASK with your network mask. - For the route command, replace $GTWAY with your default gateway. - - Code listing 5.4: Static IP Network Configuration -# ifconfig $IFACE $IPNUM broadcast $BCAST netmask $NMASK -# /sbin/route add -net default gw $GTWAY netmask 0.0.0.0 metric 1 - - Now it's time to create the /etc/resolv.conf file so that name - resolution (finding Web/FTP sites by name, rather than just by IP - address) will work. - - Here's a template to follow for creating your /etc/resolv.conf file: - - Code listing 5.5: /etc/resolv.conf template -domain mydomain.com -nameserver 10.0.0.1 -nameserver 10.0.0.2 - - Replace 10.0.0.1 and 10.0.0.2 with the IP addresses of your primary - and secondary DNS servers respectively. - - Proxy Configuration - - If you are behind a proxy, it is necessary to configure your proxy - before you continue. We will export some variables to set up the proxy - accordingly. - - Code listing 5.6: Setting a Proxy -# export http_proxy="machine.company.com:1234" -# export ftp_proxy="$http_proxy" -# export RSYNC_PROXY="$http_proxy" - - Network Testing - - Now that your network has been configured, the /sbin/ifconfig -a - command should show that your network card is working (look for UP and - RUNNING in the output). - - Code listing 5.7: /sbin/ifconfig for a working network card -eth0 Link encap:Ethernet HWaddr 00:50:BA:8F:61:7A - inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0 - inet6 addr: fe80::50:ba8f:617a/10 Scope:Link - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:1498792 errors:0 dropped:0 overruns:0 frame:0 - TX packets:1284980 errors:0 dropped:0 overruns:0 carrier:0 - collisions:1984 txqueuelen:100 - RX bytes:485691215 (463.1 Mb) TX bytes:123951388 (118.2 Mb) - Interrupt:11 - - You may want to also try pinging your ISP's DNS server (found in - /etc/resolv.conf), and a website of choice, just to make sure that - your packets are reaching the net, DNS name resolution is working - correctly, etc. - - Code listing 5.8: Further Network Testing - # ping www.some_website.com - - Networking is go! - - Networking should now be configured and useable. You should be able to - use the included ssh, scp, lynx, irssi and wget commands to connect to - other machines on your LAN or the Internet. - - 6.Partition Configuration - - Now that the kernel can see the network card and disk controllers, - it's time to set up disk partitions for Gentoo Linux. - - Here's a quick overview of the standard Gentoo Linux partition layout. - We're going to create at least three partitions: a swap partition, a - root partition (to hold the bulk of Gentoo Linux), and a special boot - partition. The boot partition is designed to hold the GRUB or LILO - boot loader information as well as your Linux kernel(s). The boot - partition gives us a safe place to store everything related to booting - Linux. During normal day-to-day Gentoo Linux use, your boot partition - should remain unmounted. This prevents your kernel from being made - unavailable to GRUB (due to filesystem corruption) in the event of a - system crash, preventing the chicken-and-egg problem where GRUB can't - read your kernel (since your filesystem isn't consistent) but you - can't bring your filesystem back to a consistent state (since you - can't boot!) - - Now, on to filesystem types. Right now, you have five filesystem - options: XFS, ext2, ext3 (journaling), jfs, and ReiserFS. ext2 is the - tried and true Linux filesystem but doesn't have metadata journaling. - ext3 is the new version of ext2 with both metadata journaling and - ordered data writes, effectively providing data journaling as well. - ReiserFS is a B*-tree based filesystem that has very good small file - performance, and greatly outperforms both ext2 and ext3 when dealing - with small files (files less than 4k), often by a factor of 10x-15x. - ReiserFS also scales extremely well and has metadata journaling. As of - kernel 2.4.18+, ReiserFS is finally rock-solid and highly recommended. - XFS is a filesystem with metadata journaling that is fully supported - under Gentoo Linux's xfs-sources kernel, but is generally not - recommended due to its tendency to lose recently-modified data if your - system locks up or unexpectedly reboots (due to a power failure, for - instance.) Finially, jfs is IBM's own high performance journaling - filesystem. Since it is obscure, we cannot comment either positvely - nor negatively on its stability. - - If you're looking for the most standard filesystem, use ext2. If - you're looking for the most rugged journalled filesystem, use ext3. If - you're looking for a high-performance filesystem with journaling - support, use ReiserFS; both ext3 and ReiserFS are mature and refined. - Here are our basic recommended filesystem sizes and types: - Partition Size Type example device - boot partition, containing kernel(s) and boot information 100 - Megabytes ext2/3 highly recommended (easiest); if ReiserFS then mount - with -o notail /dev/hda1 - swap partition (no longer a 128 Megabyte limit) Generally, unless you - are running a server, swapspace can be pretty flexible. Please consult - the below table for some loose guidelines on swap space. Linux swap - /dev/hda2 - root partition, containing main filesystem (/usr, /home, etc) >=1.5 - Gigabytes ReiserFS, ext3 recommended; ext2 ok /dev/hda3 - Physical RAM Swapspace Size - 0-48MB RAM 048-064MB RAM 064MB-128MB RAM 128-256MB RAM 256-512MB RAM - 720MB 702MB 640MB 256MB - - Before creating filesystems, you may want to initialize the beginning - of your HD using dd. Doing this will ensure that your new filesystem - will not be mis-indentified by Linux's mounting code. This can be done - as follows: - - Code listing 6.1: Initializing first 1024 Sectors of HD -# dd if=/dev/zero of=/dev/hdxy bs=1K count=1 -Replace /dev/hdxy with the device you wish to "clean." - - Warning: The command above will destroy all data from /dev/hdxy. Be - careful and check twice which partition you specify for zeroing. If - you make a mistake it might result in a loss of data. - - At this point, create your partitions using fdisk. Note that your - partitions should be of type 82 if swap and 83 for regular filesystems - (whether ReiserFS, ext2/3 or other). - - Note: cfdisk is included on the install CD, and it is considerably - easier to use than fdisk. Just type cfdisk to run it; by default, - cfdisk will work with /dev/hda. If /dev/hda is not the hard disk you - want to partition, give the right value to cfdisk as a parameter. For - example: cfdisk /dev/hde - - Note: If fdisk or cfdisk instruct you to do so, please reboot to allow - your system to detect the new partition configuration. - - Note: If you are using RAID your partitions will be a little - different. You will have the partitions like this: - /dev/ataraid/discX/partY X is the arrays you have made, so if you only - have made 1 array, then it will be disc0.Y is the partition number as - in /dev/hdaY - - Once you've created your partitions, it's time to initialize the - filesystems that will be used to house our data. Initialize swap as - follows: - - Code listing 6.2: Initializing Swap - # mkswap /dev/hda2 - - You can use the mke2fs command to create ext2 filesystems. - - Code listing 6.3: Creating an ext2 Filesystem - # mke2fs /dev/hda1 - - To create an XFS filesystem, use the mkfs.xfs command. - - Code listing 6.4: Creating a XFS Filesystem - # mkfs.xfs /dev/hda3 - - Note: You may want to add a couple of additional flags to the mkfs.xfs - command: -d agcount=3 -l size=32m. The -d agcount=3 command will lower - the number of allocation groups. XFS will insist on using at least 1 - allocation group per 4 GB of your partition, so, for example, if you - hava a 20 GB partition you will need a minimum agcount of 5. The -l - size=32m command increases the journal size to 32 Mb, increasing - performance. - - Warning: If you are installing an XFS partition over a previous - ReiserFS partition, later attempts to mount may fail without an - explicit mount -t xfs. The solution is to zero out the partition - before creating the XFS filesystem: dd if=/dev/zero of=/dev/hdx bs=1k. - - If you'd like to use ext3, you can create ext3 filesystems using - mke2fs -j. - - Code listing 6.5: Creating an ext3 Filesystem - # mke2fs -j /dev/hda3 - - Note: You can find out more about using ext3 under Linux 2.4 at - [5]http://www.zip.com.au/~akpm/linux/ext3/ext3-usage.html. - - To create ReiserFS filesystems, use the mkreiserfs command. - - Code listing 6.6: Creating a ReiserFS Filesystem - # mkreiserfs /dev/hda3 - - To create JFS filesystems, use the mkfs.jfs comamnd. - - Code listing 6.7: Creating a JFS Filesystem - # mkfs.jfs /dev/hda3 - - 7.Mount Partitions - - Now, we'll activate our new swap, since we may need the additional - virtual memory that provides later: - - Code listing 7.1: Activating Swap - # swapon /dev/hda2 - - Next, we'll create the /mnt/gentoo and /mnt/gentoo/boot mountpoints, - and we'll mount our filesystems to these mountpoints. - - Code listing 7.2: Creating Mount Points -# mkdir /mnt/gentoo -# mount /dev/hda3 /mnt/gentoo -# mkdir /mnt/gentoo/boot -# mount /dev/hda1 /mnt/gentoo/boot - - If you are setting up Gentoo Linux with a separate /usr or /var, these - would get mounted to /mnt/gentoo/usr and /mnt/gentoo/var, - respectively. - - Important: If your boot partition (the one holding the kernel) is - ReiserFS, be sure to mount it with the -o notail option so GRUB gets - properly installed. Make sure that notail ends up in your new - /etc/fstab boot partition entry, too. We'll get to that in a bit. - - Important: If you are having problems mounting your boot partition - with ext2, try using mount /dev/hXX /mnt/gentoo/boot -t ext2 - - 8.Obtaining the Desired 'stage-x' Tarball - - If you are using a GRP CD to install, you already have all of the - stage tarballs available on the CD. If this is the case, copy the - tarball of your choice to /mnt/gentoo - - Alternatively, if you do not have a GRP CD, the stage1 tarball is - still available on the CD in /mnt/cdrom/gentoo. You will have to - download the other stages though, and the best place to download those - to is /mnt/gentoo. - - Code listing 8.1: Downloading Required Stages -# cd /mnt/gentoo -Use lynx to get the URL for your tarball: -# lynx http://www.ibiblio.org/pub/Linux/distributions/gentoo/releases/1.4_rc2/x -86/ -Use Up and Down arrows keys (or the TAB key) to go to the right directory -Highlight the appropriate stage you want to download -Press d which will initiate the download -Save the file and quit the browser - -OR use wget from the command line: -# wget insert URL to the required stage tarball here. - - 9.Unpacking the Stage Tarballs - - Now it's time to extract the compressed stage tarball of your choice - to /mnt/gentoo. Then, we'll chroot over to the new Gentoo Linux build - installation to "enter" the new Gentoo Linux system. - - Important: Be sure to use the p option with tar. Forgetting to do this - will cause certain files to have incorrect permissions. - - If you are using the "from scratch, build everything" install method, - you will want to use the stage1-ix86-1.4_beta.tbz2 image. If you're - using one of our bigger CDs, you'll also have a choice of a stage2 and - stage3 image. These images allow you to save time at the expense of - configurability (we've already chosen compiler optimizations and - default USE variables for you.) - - Code listing 9.1: Unpacking the Stages -# cd /mnt/gentoo -# tar -xvjpf /mnt/cdrom/gentoo/stage?-*.tbz2 -# mount -o bind /proc /mnt/gentoo/proc - - -# cp /etc/resolv.conf /mnt/gentoo/etc/resolv.conf - - If you are going to use GRP, now would be a good time to execute the - following commands: - - Code listing 9.2: Getting ready for GRP -# mkdir /mnt/gentoo/GRP -# mount -o bind /mnt/cdrom/gentoo/packages /mnt/gentoo/GRP - - Code listing 9.3: Entering the chroot Environment -# chroot /mnt/gentoo /bin/bash -# env-update -Regenerating /etc/ld.so.cache... -# source /etc/profile -The above points your shell to the new paths and updated binaries. - - After you execute these commands, you'll be "inside" your new Gentoo - Linux environment. - - 10.Getting the Current Portage Tree using Rsync - - Now, you'll need to run emerge sync. This will make sure that you have - the most current copy of the Portage tree. - - Code listing 10.1: Updating Using Rsync - -# emerge sync -# export CONFIG_PROTECT="-*" -# export USE="-* bootstrap build" -# emerge portage -# unset USE - - The Portage tree will be downloaded and stored in /usr/portage; it's - about 90Mb in size without tarballs. - - Note: The export CONFIG_PROTECT="-*" line ensures that any new scripts - installed to /etc will overwrite the old scripts (stored in - sys-apps/baselayout), bypassing Portage's new config file management - support. Type emerge --help config for more details. - - 11.Setting Gentoo optimizations (make.conf) - - Now that you have a working copy of the Portage tree, people using - stage1 to install will need to bootstrap their Gentoo Linux system as - follows. First edit the file /etc/make.conf. In this file, you should - set your USE flags, which specify optional functionality that you - would like to be built into packages; generally, the defaults (an - empty or unset USE variable) are fine. More information on USE flags - can be found [6]here. A complete list of current USE flags can be - found [7]here. - - You also should set appropriate CHOST, CFLAGS and CXXFLAGS settings - for the kind of system that you are creating (commented examples can - be found further down in the file.) Your best friend is man gcc to - figure out what additional CFLAGS and CXXFLAGS are available. Search - for 'Optimization'. - - If necessary, you can also set proxy information here if you are - behind a firewall. - - Code listing 11.1: Setting make.conf Options - # nano -w /etc/make.conf (Adjust these settings) - - Note: People who need to substantially tweak the build process should - take a look at the /etc/make.globals file. This file comprises gentoo - defaults and should never be touched. If the defaults do not suffice, - then new values should be put in /etc/make.conf, as entries in - make.conf override the entries in make.globals. If you're interested - in tweaking USE settings, look in /etc/make.profile/make.defaults. If - you want to turn off any USE settings found here, add an appropriate - USE="-foo" in /etc/make.conf (to turn off the foo USE setting.) - - 12.Starting from Stage1 - - The stage1 tarball is for ultimate tweakage. If you have picked this - tarball, you are most likely looking to have an uber-optimized system. - Have fun, because optimization is what Gentoo Linux is all about! - - Now, it's time to start the "bootstrap" process. This process takes - about two hours on my 1200Mhz AMD Athlon system. During this time, the - extracted build image will be prepped for compiling the rest of the - system. The GNU compiler suite will be built, as well as the GNU C - library. These are time consuming builds and make up the bulk of the - bootstrap process. - - Code listing 12.1: Bootstrapping -# cd /usr/portage -# scripts/bootstrap.sh - - The "bootstrap" process will now begin. - - Note: Portage by default uses /var/tmp during package building, often - using several hundred megabytes of temporary storage. If you would - like to change where Portage stores these temporary files, set a new - PORTAGE_TMPDIR before starting the bootstrap process, as follows: - - Code listing 12.2: Changing Portage's Storage Path - # export PORTAGE_TMPDIR="/otherdir/tmp" - - bootstrap.sh will build binutils, gcc, gettext, and glibc, rebuilding - binutils, gcc, and gettext after glibc. Needless to say, this process - takes a while. Have a nice nap. Once this process completes, your - system will be equivalent to a "stage2" system, which means you can - now move on to the stage2 instructions. - - 13.Starting from Stage2 - - The stage2 tarball already has the bootstrapping done for you. All - that you have to do is install the rest of the system. - - Note: If you haven't done so, please edit /etc/make.conf to your - flavor. - - Code listing 13.1: Installing the Rest of the System -# emerge -p system - [lists the packages to be installed] -# emerge system - - It's going to take a while to finish building the entire base system. - Your reward is that it will be thoroughly optimized for your system. - The drawback is that you have to find a way to keep yourself occupied - for some time to come. The author suggests "Star Wars - Super Bombad - Racing" for the PS2. - - When this process completes, your system will be the equivalent of a - stage3 system. You have a couple of choices on how to continue at this - point. You can move onto the stage3 instructions and complete those. - Doing that will get your system right up to date with what is in the - current Portage tree. This is not necessary, but it is highly - recommended. If you do not choose to get up to date with the stage3 - instructions, you can move onto the GRP install section. If you do not - wish to use GRP, you can move onto [8]Chapter 16: Final Steps. - - 14.Starting from Stage3 - - The stage3 tarball is already configured for your system. There is not - much to do for this stage, but it is a very good idea to update your - system to the newest available packages. - - Note: If you have not already edited /etc/make.conf to fit your - specifications, now would be a good time to do so. - - Code listing 14.1: Getting up-to-date - # emerge sync - # emerge -up world - lists [packages] to be installed - # emerge -u world - - Once you complete this step, you have some options on how to continue. - If you are going to be using GRP, please move onto the GRP section. If - you are not going to use GRP, you may continue onto [9]Chapter 16: - Final Steps. - - 15.Using GRP - - You can take advantage of pre-built GRP package sets to avoid - compiling certain popular and large packages. Currently, we provide - full builds of everything you need for openoffice-bin, GNOME, KDE and - xfree. - - First, you will need to cd to the location of the packages directory. - We have already mounted the directory at /GRP. In that directory you - will find the grp-install.sh script, an All directory that contains - all of the binary packages, and a list of available GRP packages. To - install any/all of these package sets you should do the following: - - Code listing 15.1: Using GRP -# cd /GRP -# sh grp-install.sh <list of package lists> -where <list of package lists> may be any of the *-list.txt files found in the s -ame directory. - - grp-install.sh can be run multiple times without replacing existing - installations. You can do a sh grp-install.sh for a basic usage - description if you are still a bit foggy. - - 16.Setting your Timezone - - At this point, you should have system that's ready for final - configuration. We'll start the configuration process by setting the - timezone. By setting the timezone before building the kernel we ensure - that users get reasonable uname -a output. - - Look for your timezone (or GMT if you using Greenwich Mean Time) in - /usr/share/zoneinfo. Then, make a symbolic link by typing: - - Code listing 16.1: Creating a symbolic link for timezome - # ln -sf /usr/share/zoneinfo/path/to/timezonefile /etc/localtime - - You might also want to check /etc/rc.conf to make sure your timezone - settings are correct. - - 17.Installing the kernel and a System Logger - - Note: If you haven't done so, please edit /etc/make.conf to your - flavor. - - You now need to merge Linux source ebuilds. Here are the ones we - currently offer: - ebuild description - gentoo-sources Our own performance and functionality-enhanced kernel - does not include XFS support. - xfs-sources Highly-compatible kernel with XFS support. - openmosix-sources A stock Linux kernel source tree patched with - support for the GPL [10]openMosix load-balancing/clustering technology - usermode-sources A stock Linux kernel source tree patched with support - for User-Mode Linux. ("Linux inside Linux" technology) - vanilla-sources A stock Linux kernel source tree, just like you'd get - from kernel.org - - Warning: If you are configuring your own kernel, be careful with the - grsecurity option. Being too aggressive with your security settings - can cause certain programs (such as X) to not run properly. If in - doubt, leave it out. - - Choose a kernel and then merge as follows: - - Code listing 17.1: Emerging Kernel Sources - # emerge sys-kernel/gentoo-sources - - Once you have a Linux kernel source tree available, it's time to - compile your own custom kernel. - - Please note that /usr/src/linux is a symlink to your current emerged - kernel source package, which is set automatically by Portage at emerge - time. If you have multiple kernel source packages, it is necessary to - set the /usr/src/linux symlink to the correct one before proceeding. - - Code listing 17.2: Compiling the Linux Kernel -# cd /usr/src/linux -# source /etc/profile -Again, this updates your paths. If you get an error saying gcc is not found, -this is what you may have to do. -# make menuconfig -# make dep && make clean bzImage modules modules_install -# mv /boot/bzImage /boot/bzImage.orig -[if bzImage already exists] -# cp /usr/src/linux/arch/i386/boot/bzImage /boot - - Warning: For your kernel to function properly, there are several - options that you will need to ensure are in the kernel proper -- that - is, they should be enabled and not compiled as modules. You will need - to enable the "Code maturity level options --> Prompt for development - and/or incomplete code/drivers" option to see several of these - selections. Under the "File systems" section, be sure to enable the - "/dev" file system support (note that you don't need to enable the - "/dev/pts file system support" option). You'll also need to enable the - "Virtual Memory Filesystem". Be sure to enable "ReiserFS" if you have - any ReiserFS partitions; the same goes for "Ext3". If you're using - XFS, enable the "SGI XFS filesystem support" option. It's always a - good idea to leave ext2 enabled whether you are using it or not. Also, - most people using IDE hard drives will want to enable the "USE DMA by - default" option; otherwise, your IDE drives may perform very poorly. - Of course, remember to enable "IDE disk" support as well -- otherwise - your kernel won't be able to see your IDE disks. - - If you are using hardware RAID you will need to enable a couple more - options in the kernel: For Highpoint RAID controllers select hpt366 - chipset support, support for IDE RAID controllers and Highpoint 370 - software RAID.For Promise RAID controllers select PROMISE - PDC202{46|62|65|67|68|69|70} support, support for IDE RAID controllers - and Support Promise software RAID (Fasttrak(tm)) - - If you use PPPoE to connect to Internet, you will need the following - options in the kernel (built-in or as preferably as modules) : "PPP - (point-to-point protocol) support", "PPP support for async serial - ports", "PPP support for sync tty ports". The two compression options - won't harm but are not definitely needed, neither does the "PPP over - Ethernet" option, that might only be used by rp-pppoe when configured - to do kernel mode PPPoE. - - If you have an IDE cd burner, then you need to enable SCSI emulation - in the kernel. Turn on "ATA/IDE/MFM/RLL support" ---> "IDE, ATA and - ATAPI Block devices" ---> "SCSI emulation support" (I usually make it - a module), then under "SCSI support" enable "SCSI support", "SCSI - CD-ROM support" and "SCSI generic support" (again, I usually compile - them as modules). If you also choose to use modules, then echo -e - "ide-scsi\nsg\nsr_mod" >> /etc/modules.autoload to have them - automatically added at boot time. - - Note: For those who prefer it, it is now possible to install Gentoo - Linux with a 2.2 kernel. However, doing this comes at a price: you - will lose many of the nifty features that are new to the 2.4 series - kernels (such as XFS and tmpfs filesystems, iptables, and more), - although the 2.2 kernel sources can be patched with ReiserFS and devfs - support. Gentoo linux boot scripts require either tmpfs or ramdisk - support in the kernel, so 2.2 kernel users need to make sure that - ramdisk support is compiled in (ie, not a module). It is vital that a - gentoo=notmpfs flag be added to the kernel line in - /boot/grub/grub.conf for the 2.2 kernel so that a ramdisk is mounted - for the bootscripts instead of tmpfs. If you choose not to use devfs, - then gentoo=notmpfs,nodevfs should be used instead. - - Your new custom kernel (and modules) are now installed. Now you need - to choose a system logger that you would like to install. We offer - sysklogd, which is the traditional set of system logging daemons. We - also have msyslog and syslog-ng as well as metalog. Power users seem - to gravitate away from sysklogd (not very good performance) and - towards the newer alternatives. If in doubt, you may want to try - metalog, since it seems to be quite popular. To merge your logger of - choice, type one of the next four lines: - - Code listing 17.3: Emerging System Logger of Choice -# emerge app-admin/sysklogd -# rc-update add sysklogd default -or -# emerge app-admin/syslog-ng -# rc-update add syslog-ng default -or -# emerge app-admin/metalog -# rc-update add metalog default -or -# emerge app-admin/msyslog -# rc-update add msyslog default - - Warning: In the case of syslog-ng you need to create - /etc/syslog-ng/syslog-ng.conf. See /etc/syslog-ng for a sample - configuration file. - - Important: Metalog flushes output to the disk in blocks, so messages - aren't immediately recorded into the system logs. If you are trying to - debug a daemon, this performance-enhancing behavior is less than - helpful. When your Gentoo Linux system is up and running, you can send - metalog a USR1 signal to temporarily turn off this message buffering - (meaning that tail -f /var/log/everything/current will now work in - real time, as expected), and a USR2 signal to turn buffering back on - again. If you want to disable buffering permanently, you can change - METALOG_OPTS="-B" to METALOG_OPTS="-B -s" in /etc/conf.d/metalog. - - Now, you may optionally choose a cron package that you'd like to use. - Right now, we offer dcron, fcron and vcron. If you don't know which - one to choose, you might as well grab vcron. They can be installed as - follows: - - Code listing 17.4: Choosing a CRON Daemon -# emerge sys-apps/dcron -# crontab /etc/crontab -or -# emerge sys-apps/fcron -# crontab /etc/crontab -or -# emerge sys-apps/vcron -You do not need to run crontab /etc/crontab if using vcron. -Don't forget to add your *cron to the proper init level. -# rc-update add *cron default - - For more information on starting programs and daemons at startup, see - the [11]rc-script guide. - - 18.Installing miscellany necessary packages - - If you need rp-pppoe to connect to the net, be aware that at this - point it has not been installed. It would be the good time to do it. - - Code listing 18.1: Installing rp-pppoe - # USE="-X" emerge rp-pppoe - - Note: The USE="-X" prevents pppoe from installing its optional X - interface, which is a good thing, because X and its dependencies would - also be emerged. You can always recompile rp-pppoe with X support - later. - - Note: Please note that the rp-pppoe is built but not configured. You - will have to do it again using adsl-setup when you boot into your - Gentoo system for the first time. - - You may need to install some additional packages in the Portage tree - if you are using any optional features like XFS, ReiserFS or LVM. If - you're using XFS, you should emerge the xfsprogs package: - - Code listing 18.2: Emerging Filesystem Tools -# emerge sys-apps/xfsprogs -If you'd like to use ReiserFS, you should emerge the ReiserFS tools: -# emerge sys-apps/reiserfsprogs -If you'd like to use JFS, you should emerge the JFS tools: -# emerge jfsutils -If you're using LVM, you should emerge the lvm-user package: -# emerge sys-apps/lvm-user - - If you're a laptop user and wish to use your PCMCIA slots on your - first real reboot, you'll want to make sure you install the pcmcia-cs - package. - - Code listing 18.3: Emerging PCMCIA-cs - # emerge sys-apps/pcmcia-cs - - Warning: You will have to re-emerge pcmcia-cs after installation to - get PCMCIA to work. - - 19.Modifying /etc/fstab for your machine - - Your Gentoo Linux system is almost ready for use. All we need to do - now is configure a few important system files and install the GRUB - boot loader. The first file we need to configure is /etc/fstab. - Remember that you should use the notail option for your boot partition - if you chose to create a ReiserFS filesystem on it. Remember to - specify ext2, ext3 or reiserfs filesystem types as appropriate. - - Use something like the /etc/fstab listed below, but of course be sure - to replace "BOOT", "ROOT" and "SWAP" with the actual block devices you - are using (such as hda1, etc.) - - Code listing 19.1: Editing fstab -# /etc/fstab: static file system information. -# -# noatime turns off atimes for increased performance (atimes normally aren't -# needed; notail increases performance of ReiserFS (at the expense of storage -# efficiency). It's safe to drop the noatime options if you want and to -# switch between notail and tail freely. - -# <fs> <mountpoint> <type> <opts> <dump/pass> - -# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts. - -/dev/BOOT /boot ext2 noauto,noatime 1 2 -/dev/ROOT / ext3 noatime 0 1 -/dev/SWAP none swap sw 0 0 -/dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,ro 0 0 -proc /proc proc defaults 0 0 - - Warning: Please notice that /boot is NOT mounted at boottime. This is - to protect the data in /boot from corruption. If you need to access - /boot, please mount it! - - 20.Setting the Root Password - - Before you forget, set the root password by typing: - - Code listing 20.1: Setting the root Password - # passwd - - You will also want to add a non-root user for everyday use. Please - consult the [12]Gentoo FAQ. - - 21.Setting your Hostname - - Edit this file so that it contains your fully-qualified domain name on - a single line, i.e. mymachine.mydomain.com. - - Code listing 21.1: Configuring Hostname - # echo mymachine.mydomain.com > /etc/hostname - - 22.Modifying /etc/hosts - - This file contains a list of ip addresses and their associated - hostnames. It's used by the system to resolve the IP addresses of any - hostnames that may not be in your nameservers. Here's a template for - this file: - - Code listing 22.1: Hosts Template -127.0.0.1 localhost -# the next line contains your IP for your local LAN, and your associated machin -e name -192.168.1.1 mymachine.mydomain.com mymachine - - Note: If you are on a DHCP network, it might be helpful to set - localhost to your machine's actual hostname. This will help GNOME and - many other programs in name resolution. - - 23.Final Network Configuration - - Add the names of any modules that are necessary for the proper - functioning of your system to /etc/modules.autoload file (you can also - add any options you need to the same line.) When Gentoo Linux boots, - these modules will be automatically loaded. Of particular importance - is your ethernet card module, if you happened to compile it as a - module: - - Code listing 23.1: /etc/modules.autoload -This is assuming that you are using a 3com card. - Check /lib/modules/`uname -r`/kernel/drivers/net for your card. - -3c59x - - Edit the /etc/conf.d/net script to get your network configured for - your first boot: - - Code listing 23.2: Boottime Network Configuration -# nano -w /etc/conf.d/net -# rc-update add net.eth0 default - - If you have multiple network cards you need to create additional - net.ethx scripts for each one (x = 1, 2, ...): - - Code listing 23.3: Multiple Network Interfaces -# cd /etc/init.d -# cp net.eth0 net.ethx -# rc-update add net.ethx default - - If you have a PCMCIA card installed, have a quick look into - /etc/init.d/pcmcia to verify that things seem all right for your - setup, then add this line to the top of /etc/init.d/net.ethx: - - Code listing 23.4: PCMCIA depend in /etc/init.d/net.ethx -depend() { - need pcmcia -} - - This makes sure that the PCMCIA drivers are autoloaded whenever your - network is loaded. - - 24.Final steps: Configure Basic Settings (including the international - keymap setting) - - Code listing 24.1: Basic Configuration - # nano -w /etc/rc.conf - - Follow the directions in the file to configure the basic settings. All - users will want to make sure that CLOCK is set to his/her liking. - International keyboard users will want to set the KEYMAP variable - (browse /usr/share/keymaps to see the various possibilities). - - 25.Configure a Bootloader - - Notes - - In the spirit of Gentoo, users now have more than one bootloader to - choose from. Using our virtual package system, users are now able to - choose between both GRUB and LILO as their bootloaders. - - Please keep in mind that having both bootloaders installed is not - necessary. In fact, it can be a hinderance, so please only choose one. - - Important: If you are installing Gentoo Linux on a system with an - NVIDIA nForce or nForce2 chipset with an integrated GeForce graphics - card, you should use LILO and avoid GRUB. With on-board video enabled, - the low memory area of your RAM is used as video RAM. Since GRUB also - uses low memory at boot time, it will experience an "out of memory" - condition. So, if you have an nForce or potentially other board with - on-board video, use LILO. Even if you're using off-board video right - now, it'd be nice to be able to remove the graphics card and use the - on-board video in a pinch, wouldn't it? :) - - Configuring GRUB - - The most critical part of understanding GRUB is getting comfortable - with how GRUB refers to hard drives and partitions. Your Linux - partition /dev/hda1 is called (hd0,0) under GRUB. Notice the - parenthesis around the hd0,0 - they are required. Hard drives count - from zero rather than "a", and partitions start at zero rather than - one. Be aware too that with the hd devices, only harddrives are - counted, not atapi-ide devices such as cdrom players, burners, and - that the same construct can be used with scsi drives. (Normally they - get higher numbers than ide drives except when the bios is configured - to boot from scsi devices.) Assuming you have a harddrive on /dev/hda, - a cdrom player on /dev/hdb, a burner on /dev/hdc and a second hardrive - on /dev/hdd, for example, and no scsi harddrive /dev/hdd7 gets - translated to (hd1,6). It might sound tricky, and tricky it is indeed, - but as we will see, grub offers a tab completion mechanism that comes - handy for those of you having a lot of harddrives and partitions and - who are a little lost in the grub numbering scheme. Having gotten the - feel for that, it's time to install GRUB. - - The easiest way to install GRUB is to simply type grub at your - chrooted shell prompt: - - Code listing 25.1: Installing GRUB -# emerge grub -# grub - - Important: If you are using hardware RAID this part will not work at - this time. Skip to the section on making your grub.conf. After that we - will complete the grub setup for RAID controllers - - You'll be presented with the grub> grub command-line prompt. Now, you - need to type in the right commands to install the GRUB boot record - onto your hard drive. In my example configuration, I want to install - the GRUB boot record on my hard drive's MBR (master boot record), so - that the first thing I see when I turn on the computer is the GRUB - prompt. In my case, the commands I want to type are: - - Code listing 25.2: GRUB on the MBR -grub> root (hd0,0) // Your boot partition -grub> setup (hd0) // Where the boot record is installed, here, it is the MBR - - Code listing 25.3: GRUB not on the MBR -Alternatively, if you wanted to install the bootloader somewhere other than the - MBR -grub> root (hd0,0) // Your boot partition -grub> setup (hd0,4) // Where the boot record is installed, here it is /dev/hda5 -grub> quit - - Here's how the two commands work. The first root ( ) command tells - GRUB the location of your boot partition (in our example, /dev/hda1 or - (hd0,0) in GRUB terminology. Then, the second setup ( ) command tells - GRUB where to install the boot record - it will be configured to look - for its special files at the root ( ) location that you specified. In - my case, I want the boot record on the MBR of the hard drive, so I - simply specify /dev/hda (also known as (hd0)). If I were using another - boot loader and wanted to set up GRUB as a secondary boot-loader, I - could install GRUB to the boot record of a particular partition. In - that case, I'd specify a particular partition rather than the entire - disk. Once the GRUB boot record has been successfully installed, you - can type quit to quit GRUB. - - Note: The tab completion mechanism of grub can be used from within - grub, assuming you wrote root ( and that you hit the TAB key, you - would be prompted with a list of the available devices (not only - harddrives), hitting the TAB key having written root (hd, grub would - print the available harddrives and hitting the TAB key after writing - root (hd0, would make grub print the list of partitions on the first - harddrive. Checking the syntax of the grub location with completion - should really help to make the right choice. - - Gentoo Linux is now installed, but we need to create the - /boot/grub/grub.conf file so that we get a nice GRUB boot menu when - the system reboots. Here's how to do it. - - Important: To ensure backwards compatibility with GRUB, make sure to - make a link from grub.conf to menu.lst. You can do this by doing ln -s - /boot/grub/grub.conf /boot/grub/menu.lst . - - Now, create the grub.conf file (nano -w /boot/grub/grub.conf), and add - the following to it: - - Code listing 25.4: Grub.conf for GRUB -default 0 -timeout 30 -splashimage=(hd0,0)/boot/grub/splash.xpm.gz - -title=My example Gentoo Linux -root (hd0,0) -kernel (hd0,0)/boot/bzImage root=/dev/hda3 - - #Below is for setup using hardware RAID -title=My Gentoo Linux on RAID -root (hd0,0) -kernel (hd0,0)/boot/bzImage root=/dev/ataraid/dXpY - -# Below needed only for people who dual-boot -title=Windows NT Workstation -root (hd0,5) -chainloader (hd0,5)+1 - - Note: (hd0,0) should be written without any spaces inside the - parentheses. - - Important: If you set up scsi emulation for an IDE cd burner earlier, - then to get it to actually work you need to add an "hdx=ide-scsi" - fragment to the kernel line in grub.conf (where "hdx" should be the - device for your cd burner). - - After saving this file, Gentoo Linux installation is complete. - Selecting the first option will tell GRUB to boot Gentoo Linux without - a fuss. The second part of the grub.conf file is optional, and shows - you how to use GRUB to boot a bootable Windows partition. - - Note: Above, (hd0,0) should point to your "boot" partition (/dev/hda1 - in our example config) and /dev/hda3 should point to your root - filesystem. (hd0,5) contains the NT boot loader. - - Note: The path to the kernel image is relative to the boot partition. - If for example you have separated boot partition (hd0,0) and root - partition (hd0,1), all paths in the grub.conf file above will become - /bzImage. - - If you need to pass any additional options to the kernel, simply add - them to the end of the kernel command. We're already passing one - option (root=/dev/hda3), but you can pass others as well. In - particular, you can turn off devfs by default (not recommended unless - you know what you're doing) by adding the gentoo=nodevfs option to the - kernel command. - - Note: Unlike in earlier versions of Gentoo Linux, you no longer have - to add devfs=mount to the end of the kernel line to enable devfs. In - rc6 devfs is enabled by default. - - Configuring LILO - - While GRUB may be the new alternative for most people, it is not - always the best choice. LILO, the LInuxLOader, is the tried and true - workhorse of Linux bootloaders. Here's how to install LILO if you - would like to use it instead of GRUB: - - The first step is to emerge LILO: - - Code listing 25.5: Emerging LILO - # emerge lilo - - Now it is time to configure LILO. I will give you a small lilo.conf to - use, and I will explain the different parts of the file. - - Code listing 25.6: Example lilo.conf -boot=/dev/hda -map=/boot/map -install=/boot/boot.b -prompt -timeout=50 -message=/boot/message -lba32 -default=linux - -image=/boot/vmlinuz-2.4.20 - label=linux - read-only - root=/dev/hda5 - -#For dual booting windows/other OS -other=/dev/hda1 - label=dos - - * boot=/dev/hda tells LILO to install itself on the first - hard disk on the first IDE controller. - * map=/boot/map states the map file. In normal use, this should not - be modified. - * install=/boot/boot.b tells LILO to install the specified file as - the new boot sector. In normal use, this should not be altered. If - the install line is missing, LILO will assume a default of - /boot/boot.b as the file to be used. - * The existence of prompt tells LILO to show you whatever is - referenced in the message line. While it is not recommended that - you remove the prompt line, if you do remove it, you can still get - a prompt by holding down the [Shift] key while your machine starts - to boot. - * timeout=50 sets the amount of time that LILO will wait for user - input before proceeding with booting the default line entry. This - is measured in tenths of a second, with 50 as the default. - * message=/boot/message refers to the screen that LILO displays to - let you select the operating system or kernel to boot. - * lba32 describes the hard disk geometry to LILO. Another common - entry here is linear. You should not change this line unless you - are very aware of what you are doing. Otherwise, you could put - your system in an unbootable state. - * default=linux refers to the default operating system for LILO to - boot from the options listed below this line. The name linux - refers to the label line below in each of the boot options. - * image=/boot/vmlinuz-2.4.20 specifies the linux kernel to boot with - this particular boot option. - * label=linux names the operating system option in the LILO screen. - In this case, it is also the name referred to by the default line. - * read-only specifies that the root partition (see the root line - below) is read-only and cannot be altered during the boot process. - * root=/dev/hda5 tells LILO what disk partition to use as the root - partition. - - Note: Thanks to [13]Redhat.com for this information. - - After you have edited your lilo.conf file, it is time to run LILO to - load the information into the MBR: - - Code listing 25.7: Running LILO - # /sbin/lilo - - LILO is configured, and now your machine is ready to boot into Gentoo - Linux! - - 26.Creating Bootdisks - - GRUB Bootdisks - - It is always a good idea to make a boot disk the first time you - install any Linux distribution. This is a security blanket, and - generally not a bad thing to do. If you are using some kinds of - hardware RAID, you may need make a GRUB boot disk. With these types of - hardware RAID, if you try to install grub from your chrooted shell it - will fail. If you are in this camp, make a GRUB boot disk, and when - you reboot the first time you can install GRUB to the MBR. Make your - bootdisk like this: - - Code listing 26.1: Creating a GRUB Bootdisk -# mke2fs /dev/fd0 -# mount /dev/fd0 /mnt/floppy -# mkdir -p /mnt/floppy/boot/grub -# cp /usr/share/grub/i386-pc/stage1 /mnt/floppy/boot/grub/ -# cp /usr/share/grub/i386-pc/stage2 /mnt/floppy/boot/grub/ -# umount /mnt/floppy -# grub - -grub> root (fd0) -grub> setup (fd0) -grub> quit - - Now reboot and load the floppy. At the floppy's grub> prompt, you can - now execute the necessary root and setup commands. - - LILO Bootdisks - - If you are using LILO, it is also a good idea to make a bootdisk: - - Code listing 26.2: Making a LILO Bootdisk -# dd if=/boot/your_kernel of=/dev/fd0 -This will only work if your kernel is smaller than 1.4MB - - 27.Installation Complete! - - Now, Gentoo Linux is installed. The only remaining step is to exit the - chrooted shell, update necessary configuration files, safely unmount - your partitions and reboot the system: - - Code listing 27.1: Rebooting the System -# etc-update -# exit -// This exits the chrooted shell; you can also type ^D -# cd / -# umount /mnt/gentoo/boot -# umount /mnt/gentoo/proc -# umount /mnt/gentoo/dev -# umount /mnt/gentoo -# reboot - - Note: After rebooting, it is a good idea to run the update-modules - command to create the /etc/modules.conf file. Instead of modifying - this file directly, you should generally make changes to the files in - /etc/modules.d. - - Important: Remember if you are running hardware RAID, you must use the - bootdisk for the first reboot. then go back and install grub the way - everyone else did the first time. You are done -- congratulations! - - If you have any questions or would like to get involved with Gentoo - Linux development, consider joining our gentoo-user and gentoo-dev - mailing lists (there's a "click to subscribe" link on our [14]main - page). We also have a handy [15]Desktop configuration guide that will - help you to continue configuring your new Gentoo Linux system, and a - useful [16]Portage user guide to help familiarize you with Portage - basics. You can find the rest of the Gentoo Documentation [17]here. If - you have any other questions involving installation or anything for - that matter, please check the Gentoo Linux [18]FAQ. Enjoy and welcome - to Gentoo Linux! - - 28.Gentoo-Stats - - The Gentoo Linux usage statistics program was started as an attempt to - give the developers a way to find out about their user base. It - collects information about Gentoo Linux usage to help us in set - priorities our development. Installing it is completely optional, and - it would be greatly appreciated if you decide to use it. Compiled - statistics can be viewed at [19]http://stats.gentoo.org/. - - The gentoo-stats server will assign a unique ID to your system. This - ID is used to make sure that each system is counted only once. The ID - will not be used to individually identify your system, nor will it be - mached against an IP address or other personal information. Every - precaution has been taken to assure your privacy in the development of - this system. The following are the things that we are monitoring right - now through our "gentoo-stats" program: - * installed packages and their version numbers - * CPU information: speed (MHz), vendor name, model name, CPU flags - (like "mmx" or "3dnow") - * memory information (total available physical RAM, total available - swap space) - * PCI cards and network controller chips - * the Gentoo Linux profile your machine is using (that is, where the - /etc/make.profile link is pointing to). - - We are aware that disclosure of sensitive information is a threat to - most Gentoo Linux users (just as it is to the developers). - * Unless you modify the gentoo-stats program, it will never transmit - sensitive information such as your passwords, configuration data, - shoe size... - * Transmission of your e-mail addresses is optional and turned off - by default. - * The IP address your data transmission originates from will never - be logged in such a way that we can identify you. There are no "IP - address/system ID" pairs. - - The installation is easy - just run the following commands: - - Code listing 28.1: Installing gentoo-stats -# emerge gentoo-stats // Installs gentoo-stats -# gentoo-stats --new // Obtains a new system ID - - The second command above will request a new system ID and enter it - into /etc/gentoo-stats/gentoo-stats.conf automatically. You can view - this file to see additional configuration options. - - After that, the program should be run on a regular schedule - (gentoo-stats does not have to be run as root). Add this line to your - crontab: - - Code listing 28.2: Updating gentoo-stats with cron - 0 0 * * 0,4 /usr/sbin/gentoo-stats --update > /dev/null - - The gentoo-stats program is a simple perl script which can be viewed - with your favortive pager or editor: /usr/sbin/gentoo-stats. - line - Updated 26 Feb 2003 - line - [20]Daniel Robbins - Chief Architect - Chris Houser - Author - [21]Jerry Alexandratos - Author - [22]Grant Goodyear - Ghost - [23]John P. Davis - Editor - [24]Pierre-Henri Jondot - Editor - [25]Eric Stockbridge - Editor - [26]Rajiv Manglani - Editor - [27]Jungmin Seo - Editor - [28]Stoyan Zhekov - Editor - line - Summary: These instructions step you through the process of installing - Gentoo Linux 1.4_rc2 and 1.4_rc3. The Gentoo Linux installation - process supports various installation approaches, depending upon how - much of the system you want to custom-build from scratch. - line - - Donate to support our development efforts. - Make payments with PayPal - it's fast, free and secure! - line - [29]Win4Lin at NeTraverse - - Win4Lin from NeTraverse lets you run Windows applications under Gentoo - Linux at native speeds. [30]Purchase Win4Lin "Gentoo Edition" and - you'll also get a special Gentoo discount. Every sale also helps - support Gentoo Linux development :) - line - [31]DDR Memory at Crucial.com - - Purchase RAM from Crucial.com and a percentage of your sale will go - towards further Gentoo Linux development. - line - Copyright 2001-2003 Gentoo Technologies, Inc. Questions, Comments, - Corrections? Email [32]www@gentoo.org. - -References - - 1. http://www.gentoo.org/ - 2. http://www.gentoo.org/ - 3. http://www.ibiblio.org/gentoo/releases/1.4_rc2/x86/ - 4. http://bugs.gentoo.org/ - 5. http://www.zip.com.au/~akpm/linux/ext3/ext3-usage.html - 6. http://www.gentoo.org/doc/en/use-howto.xml - 7. http://www.gentoo.org/dyn/use-index.xml - 8. http://www.gentoo.org/doc/en/gentoo-x86-install.xml#doc_chp16 - 9. http://www.gentoo.org/doc/en/gentoo-x86-install.xml#doc_chp16 - 10. http://www.openmosix.com/ - 11. http://www.gentoo.org/doc/en/rc-scripts.xml - 12. http://www.gentoo.org/doc/en/faq.xml - 13. http://www.redhat.com/ - 14. http://www.gentoo.org/ - 15. http://www.gentoo.org/doc/en/desktop.xml - 16. http://www.gentoo.org/doc/en/portage-user.xml - 17. http://www.gentoo.org/main/en/docs.xml - 18. http://www.gentoo.org/doc/en/faq.xml - 19. http://stats.gentoo.org/ - 20. mailto:drobbins@gentoo.org - 21. mailto:jerry@gentoo.org - 22. mailto:g2boojum@gentoo.org - 23. mailto:zhen@gentoo.org - 24. mailto:Pierre-Henri.Jondot@wanadoo.fr - 25. mailto:stocke2@gentoo.org - 26. mailto:rajiv@gentoo.org - 27. mailto:seo@gentoo.org - 28. mailto:zhware@gentoo.org - 29. http://www.netraverse.com/gentoo.htm - 30. http://www.netraverse.com/gentoo.htm - 31. http://www.qksrv.net/click-477620-5032687 - 32. mailto:www@gentoo.org diff --git a/src/livecd/profiles/kde/aux-files/local b/src/livecd/profiles/kde/aux-files/local deleted file mode 100644 index f170cdc1c2..0000000000 --- a/src/livecd/profiles/kde/aux-files/local +++ /dev/null @@ -1,102 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/kde/aux-files/Attic/local,v 1.1 2003/10/19 03:10:54 livewire Exp $ - -HILITE="\033[1m" -NORMAL="\033[0m" - -NET="no" -GAME="yes" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "forceloadnet" ] - then - NET="yes" - elif [ "$x" = "noX" ] - then - GAME="no" - fi -done - -depend() { - before autoconfig -} - -blurb() { - echo -ne ${HILITE}${1} - #blurblen=${#1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} - -start() { - umount /initrd - /sbin/freeramdisk /dev/ram0 - #make our mtab look sane... - local mycdloc - mycdloc=`cat /tmp/mycd` - mycdloc=${mycdloc#/newroot*} - mount -f $mycdloc /mnt/cdrom -t iso9660 -o ro - if [ -e /mnt/livecd.cloop ] - then - mount -f /mnt/livecd.cloop /mnt/cloop -t ext2 -o ro - #cloop was cached to tmpfs so that CD could be unmounted. - else - mount -f /mnt/cdrom/livecd.cloop /mnt/cloop -t ext2 -o ro - fi - rm /tmp/mycd - FOUNDMEM="$(awk '/MemTotal/{print $2}' /proc/meminfo)" - TOTALMEM="$(awk 'BEGIN{m=0};/MemFree|Cached/{m+=$2};END{print m}' /proc/meminfo)" - MINSIZE=2000 - # At least this much memory minus 30% should remain when home and var are full. - MINLEFT=16000 - # Maximum ramdisk size - MAXSIZE="$(expr $TOTALMEM - $MINLEFT)" - # Default ramdisk size for ramdisk - RAMSIZE="$(expr $TOTALMEM / 5)" - # Check for sufficient memory to mount extra ramdisk for /home + /var - if test -n "$TOTALMEM" -a "$TOTALMEM" -gt "$MINLEFT"; then - test -z "$RAMSIZE" && RAMSIZE=1000000 - fi -# tmpfs/varsize version, can use swap - RAMSIZE=$(expr $RAMSIZE \* 5) - - mount -f tmpfs / -t tmpfs -o rw,size=${RAMSIZE}k - echo "10000" > /proc/sys/fs/file-max - echo root:`pwgen -s 16` | chpasswd > /dev/null 2>&1 - if [ "$NET" = "yes" ] - then - ebegin "Auto-detecting network modules" - # Disable kernel messages to console: - echo "0" > /proc/sys/kernel/printk - local x - for x in /lib/modules/*/kernel/drivers/net/* - do - y=${x##*/} - y=${y%%.*} - echo -ne " ${GOOD}*${NORMAL} Scanning for ${y}..." - insmod -f ${x} > /dev/null 2>&1 - backup - done - echo "6" > /proc/sys/kernel/printk - fi - if [ "$GAME" = "yes" ] - then - touch /etc/startgame - fi - if [ -e /etc/conf.d/local.start ] - then - source /etc/conf.d/local.start - fi - -} - -stop() { - return -} - -# vim:ts=4 diff --git a/src/livecd/profiles/kde/aux-files/localstart.gl b/src/livecd/profiles/kde/aux-files/localstart.gl deleted file mode 100644 index 0ed3a4175d..0000000000 --- a/src/livecd/profiles/kde/aux-files/localstart.gl +++ /dev/null @@ -1,8 +0,0 @@ -# /etc/conf.d/local.start: -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/kde/aux-files/Attic/localstart.gl,v 1.1 2003/10/19 03:10:54 livewire Exp $ - -# This is a good place to load any misc. -# programs on startup ( 1>&2 ) - -modprobe nvidia && opengl-update nvidia && cp /etc/X11/xfree-nvidia /etc/X11/XF86Config -modprobe fglrx && opengl-update ati && cp /etc/X11/xfree-ati /etc/X11/XF86Config diff --git a/src/livecd/profiles/kde/aux-files/login.defs b/src/livecd/profiles/kde/aux-files/login.defs deleted file mode 100644 index 8225588ab9..0000000000 --- a/src/livecd/profiles/kde/aux-files/login.defs +++ /dev/null @@ -1,133 +0,0 @@ -# -# /etc/login.defs - Configuration control definitions for the login package. -# -# All items are optional - if not specified then the described action or -# option will be inhibited. -# -# Comment lines (lines beginning with "#") and blank lines are ignored. -# - -# -# Delay in seconds before being allowed another attempt after a login failure -# -FAIL_DELAY 3 - -# -# Enable logging and display of /var/log/faillog login failure info. -# -FAILLOG_ENAB yes - -# -# Enable display of unknown usernames when login failures are recorded. -# -LOG_UNKFAIL_ENAB no - -# -# Enable logging and display of /var/log/lastlog login time info. -# -LASTLOG_ENAB no - -# -# If defined, ":" delimited list of "message of the day" files to -# be displayed upon login. -# -MOTD_FILE /etc/motd -#MOTD_FILE /etc/motd:/usr/lib/news/news-motd - -# -# If defined, file which maps tty line to TERM environment parameter. -# Each line of the file is in a format something like "vt100 tty01". -# -TTYTYPE_FILE /etc/ttytype - -# -# If defined, login failures will be logged here in a utmp format. -# last, when invoked as lastb, will read /var/log/btmp, so... -# -FTMP_FILE /var/log/btmp - -# -# If defined, file which inhibits all the usual chatter during the login -# sequence. If a full pathname, then hushed mode will be enabled if the -# user's name or shell are found in the file. If not a full pathname, then -# hushed mode will be enabled if the file exists in the user's home directory. -# -HUSHLOGIN_FILE .hushlogin -#HUSHLOGIN_FILE /etc/hushlogins - -# -# The default PATH settings. -# -ENV_PATH /usr/local/bin:/usr/bin:/bin - -# -# The default PATH settings for root: -# -ENV_ROOTPATH /sbin:/bin:/usr/sbin:/usr/bin - -# -# The default PATH settings when su'ing to root: -# -ENV_SUPATH /sbin:/bin:/usr/sbin:/usr/bin - -# -# Terminal permissions -# -# TTYGROUP Login tty will be assigned this group ownership. -# TTYPERM Login tty will be set to this permission. -# -# If you have a "write" program which is "setgid" to a special group -# which owns the terminals, define TTYGROUP to the group number and -# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign -# TTYPERM to either 622 or 600. -# -TTYGROUP tty -TTYPERM 0600 - -# -# Password aging controls: -# -# PASS_MAX_DAYS Maximum number of days a password may be used. -# PASS_MIN_DAYS Minimum number of days allowed between password changes. -# PASS_MIN_LEN Minimum acceptable password length. -# PASS_WARN_AGE Number of days warning given before a password expires. -# -PASS_MAX_DAYS 99999 -PASS_MIN_DAYS 0 -PASS_MIN_LEN 5 -PASS_WARN_AGE 7 - -# -# Min/max values for automatic uid selection in useradd -# -UID_MIN 1000 -UID_MAX 60000 - -# -# Min/max values for automatic gid selection in groupadd -# -GID_MIN 100 -GID_MAX 60000 - -# -# Max number of login retries if password is bad -# -LOGIN_RETRIES 3 - -# -# Max time in seconds for login -# -LOGIN_TIMEOUT 60 - -# -# Require password before chfn/chsh can make any changes. -# -CHFN_AUTH yes - -# -# Which fields may be changed by regular users using chfn - use -# any combination of letters "frwh" (full name, room number, work -# phone, home phone). If not defined, no changes are allowed. -# For backward compatibility, "yes" = "rwh" and "no" = "frwh". -# -CHFN_RESTRICT rwh diff --git a/src/livecd/profiles/kde/aux-files/md b/src/livecd/profiles/kde/aux-files/md deleted file mode 100644 index a9646751b7..0000000000 --- a/src/livecd/profiles/kde/aux-files/md +++ /dev/null @@ -1,57 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/kde/aux-files/Attic/md,v 1.1 2003/10/19 03:10:54 livewire Exp $ - -HILITE="\033[1m" -NORMAL="\033[0m" - -RAID="no" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "noraid" ] - then - RAID="no" - fi -done - -depend() { - after checkfs -# after * -} - -blurb() { - echo -ne ${HILITE}${1} - #blurblen=${#1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} -start() { - ebegin "Raid Setup" - -if [ "$RAID" = "yes" ] - then - ebegin "Auto-detecting EVMS modules" - # Disable kernel messages to console: - echo "0" > /proc/sys/kernel/printk - local x - for x in /lib/modules/*/kernel/drivers/evms/* - do - y=${x##*/} - y=${y%%.*} - echo -ne " ${GOOD}*${NORMAL} Scanning for ${y}..." - insmod -f ${x} > /dev/null 2>&1 - backup - done - fi - -} - -stop() { - return -} - -# vim:ts=4 diff --git a/src/livecd/profiles/kde/aux-files/memtest b/src/livecd/profiles/kde/aux-files/memtest Binary files differdeleted file mode 100644 index c8cfeb44a4..0000000000 --- a/src/livecd/profiles/kde/aux-files/memtest +++ /dev/null diff --git a/src/livecd/profiles/kde/aux-files/mingetty b/src/livecd/profiles/kde/aux-files/mingetty Binary files differdeleted file mode 100644 index aaa47dc976..0000000000 --- a/src/livecd/profiles/kde/aux-files/mingetty +++ /dev/null diff --git a/src/livecd/profiles/kde/aux-files/modules b/src/livecd/profiles/kde/aux-files/modules deleted file mode 100644 index 7a469b9031..0000000000 --- a/src/livecd/profiles/kde/aux-files/modules +++ /dev/null @@ -1,26 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/kde/aux-files/Attic/modules,v 1.1 2003/10/19 03:10:54 livewire Exp $ - - -depend() { - need bootmisc localmount -} - -start() { - # Loop over every line in /etc/modules.autoload. - (cat /etc/modules.autoload; echo) | # make sure there is a LF at the end - while read module args - do - case "${module}" in - \#*|"") continue ;; - esac - ebegin " Loading module ${module}" - modprobe ${module} ${args} &>/dev/null - eend $? " Failed to load ${module}" -done -} - - -# vim:ts=4 diff --git a/src/livecd/profiles/kde/aux-files/motd b/src/livecd/profiles/kde/aux-files/motd deleted file mode 100644 index c9f8c20df4..0000000000 --- a/src/livecd/profiles/kde/aux-files/motd +++ /dev/null @@ -1,4 +0,0 @@ -Welcome to the Gentoo Linux LiveCD! -Build: 26 May 2003, i686 optimizations - -type "x-setup" to (re)start Xfree86. diff --git a/src/livecd/profiles/kde/aux-files/net b/src/livecd/profiles/kde/aux-files/net deleted file mode 100644 index 22c8ffbdea..0000000000 --- a/src/livecd/profiles/kde/aux-files/net +++ /dev/null @@ -1,35 +0,0 @@ -# /etc/conf.d/net: -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/kde/aux-files/Attic/net,v 1.1 2003/10/19 03:10:54 livewire Exp $ - -# Global config file for net.* rc-scripts - -# This is basically the ifconfig argument without the ifconfig $iface -# -#iface_eth0="192.168.0.2 broadcast 192.168.0.255 netmask 255.255.255.0" -#iface_eth1="207.170.82.202 broadcast 207.0.255.255 netmask 255.255.0.0" - -# For DHCP set iface_eth? to "dhcp" -# For passing options to dhcpcd use dhcpcd_eth? -# -iface_eth0="dhcp" -iface_eth1="dhcp" -#dhcpcd_eth0="..." - -# For adding aliases to a interface -# -#alias_eth0="192.168.0.3 192.168.0.4" - -# NB: The next is only used for aliases. -# -# To add a custom netmask/broadcast address to created aliases, -# uncomment and change accordingly. Leave commented to assign -# defaults for that interface. -# -#broadcast_eth0="192.168.0.255 192.168.0.255" -#netmask_eth0="255.255.255.0 255.255.255.0" - - -# For setting the default gateway -# -#gateway="eth0/192.168.0.1" - diff --git a/src/livecd/profiles/kde/aux-files/opera.tar.bz2 b/src/livecd/profiles/kde/aux-files/opera.tar.bz2 Binary files differdeleted file mode 100644 index 5ee7d4505c..0000000000 --- a/src/livecd/profiles/kde/aux-files/opera.tar.bz2 +++ /dev/null diff --git a/src/livecd/profiles/kde/aux-files/profile b/src/livecd/profiles/kde/aux-files/profile deleted file mode 100644 index 2c9cbcacab..0000000000 --- a/src/livecd/profiles/kde/aux-files/profile +++ /dev/null @@ -1,34 +0,0 @@ -# /etc/profile: -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/kde/aux-files/Attic/profile,v 1.1 2003/10/19 03:10:54 livewire Exp $ - -if [ -e "/etc/profile.env" ] -then - source /etc/profile.env -fi - -#077 would be more secure, but 022 is generally quite realistic -umask 022 -alias cp='cp -i' -alias ls='ls --color' -alias mv='mv -i' -alias pico='nano -w' -alias rm='rm -i' -if [ `/usr/bin/whoami` = 'root' ] -then - if [ "$SHELL" = '/bin/bash' ] || [ "$SHELL" = '/bin/sh' ] - then - export PS1='\[\033[01;31m\]\h \[\033[01;34m\]\W \$ \[\033[00m\]' - fi - export PATH="/bin:/sbin:/usr/bin:/usr/sbin:${ROOTPATH}" -else - if [ "$SHELL" = '/bin/bash' ] || [ "$SHELL" = '/bin/sh' ] - then - export PS1='\[\033[01;32m\]\u@\h \[\033[01;34m\]\W \$ \[\033[00m\]' - fi - export PATH="/bin:/usr/bin:${PATH}" -fi -unset ROOTPATH - -if [ -z "$INPUTRC" -a ! -f "$HOME/.inputrc" ]; then - export INPUTRC="/etc/inputrc" -fi diff --git a/src/livecd/profiles/kde/aux-files/rc b/src/livecd/profiles/kde/aux-files/rc deleted file mode 100644 index b3e09564e3..0000000000 --- a/src/livecd/profiles/kde/aux-files/rc +++ /dev/null @@ -1,521 +0,0 @@ -#!/bin/bash -# Copyright 1999-2003 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/kde/aux-files/Attic/rc,v 1.1 2003/10/19 03:10:55 livewire Exp $ - - -trap ":" INT QUIT TSTP -source /sbin/functions.sh -umask 022 - -try() { - local retval=0 - # This works fine in test, but real life booting, fails for mounting /proc - # if we only check $? for instance ... We thus need to [ -n "${errstr}" ] - # as well. - local errstr - errstr="`(eval $*) 2>&1 >/dev/null`" - retval=$? - if [ "${retval}" -ne 0 ] || \ - ([ -n "`echo "$*" | gawk '/mount/ { print "yes" }'`" -a -n "${errstr}" ]) - then - echo -e "${ENDCOL}${NORMAL}[${BAD} oops ${NORMAL}]" - echo - eerror "The \"${1}\" command failed with error:" - echo - echo "${errstr#*: }" - echo - eerror "Since this is a critical task, startup cannot continue." - echo - /sbin/sulogin ${CONSOLE} - einfo "Unmounting filesystems" - /bin/mount -a -o remount,ro & >/dev/null - einfo "Rebooting" - /sbin/reboot -f - fi - return ${retval} -} - -# Check that $svcdir exists ... -check_statedir() { - if [ ! -d "${svcdir}" ] - then - if ! mkdir -p "${svcdir}" &> /dev/null - then - echo - eerror "For Gentoo Linux to function properly, \"${svcdir}\" need to exist." - eerror "Please mount your root partition read/write, and execute:" - echo - eerror " # mkdir -p ${svcdir}" - echo; echo - /sbin/sulogin ${CONSOLE} - einfo "Unmounting filesystems" - /bin/mount -a -o remount,ro & >/dev/null - einfo "Rebooting" - /sbin/reboot -f - fi - fi -} - -# Save $1 -argv1="$1" -# First time boot stuff goes here. Note that 'sysinit' is an internal runlevel -# used to bring up local filesystems, and should not be started with /sbin/rc -# directly ... -if [ "${RUNLEVEL}" = "S" -a "${argv1}" = "sysinit" ] -then - # Setup initial $PATH just in case - PATH="/bin:/sbin:/usr/bin:/usr/sbin:${PATH}" - - echo - echo -e "${GOOD}Gentoo Linux${GENTOO_VERS}; \e[34;01mhttp://www.gentoo.org/${NORMAL}" - echo -e " Copyright 2001-2003 Gentoo Technologies, Inc.; Distributed under the GPL" - echo - - ebegin "Mounting /proc"; \ - try mount -n /proc; \ - eend $? - - # Figure out the number scripts we are going to start for the progress meter :) - if [ -f /proc/splash ]; then - tscripts=`ls -1R /etc/runlevels/ | grep -c $` - nscripts=`ls -1R /etc/runlevels/ | grep -c '^\B'` - export sscripts=$((${tscripts} - ${nscripts})) - fi - - rc_splash "begin" 2> /dev/null - - if [ "$(get_KV)" -ge "$(KV_to_int '2.5.0')" -a -d /sys ] - then - ebegin "Mounting /sys" - mount -t sysfs none /sys - eend $? - fi - - # Check if the user disabled devfs - devfs="yes" - get_bootparam "nodevfs" - if [ "$?" -eq 0 ] - then - devfs="no" - fi - - # Fix weird bug where there is a /dev/.devfsd in a unmounted /dev - mymounts="`awk '($3 == "devfs") { print "yes"; exit 0 }' /proc/mounts`" - if [ -e "/dev/.devfsd" -a "${mymounts}" != "yes" ] - then - rm -f /dev/.devfsd - fi - - # With the new way, /dev can be mounted by the kernel ... - if [ "${devfs}" = "yes" -a ! -e "/dev/.devfsd" ] - then - mymounts="`awk '($2 == "devfs") { print "yes"; exit 0 }' /proc/filesystems`" - # Is devfs support compiled in? - if [ "${mymounts}" = "yes" ] - then - ebegin "Mounting devfs at /dev"; \ - try mount -n -t devfs none /dev; \ - eend $? - rc_splash "start" - else - clear - echo - einfo "The Gentoo Linux system initialization scripts have detected that your" - einfo "kernel has been compiled without DEVFS support. Because Gentoo Linux" - einfo "has been designed to work with DEVFS, it is required that you compile" - einfo "support for it into your kernel. Please read the 'Gentoo Linux from" - einfo "source (build) CD Installation Guide' at:" - echo - einfo " http://www.gentoo.org/doc/build.html" - echo - einfo "for more information on how to do this." - echo - read -t 15 -p "(hit Enter to continue or wait 15 seconds...)" - fi - fi - - # Need devfsd running now so that /dev/ram0 exists if we need it - mymounts="`awk '($3 == "devfs") { print "yes"; exit 0 }' /proc/mounts`" - if [ "${devfs}" = "yes" -a -e "/dev/.devfsd" -a \ - "${mymounts}" = "yes" ] - then - ebegin "Starting devfsd" - /sbin/devfsd /dev > /dev/null - eend $? - rc_splash "start" - fi - - # Mount either a ramdisk or tmpfs if requested. - # we do this to temp mount, until we can get /var mounted ... - tsvcdir="/mnt/.init.d" - - # Should we use tmpfs or a ramdisk for caching dependency and - # general initscript data? Note that the 'gentoo=tmpfs' kernel - # option should override most settings ... - if get_bootparam "tmpfs" || \ - [ "${svcmount}" = "yes" -a "${svcfstype}" = "tmpfs" ] - then - mkdir -p "${tsvcdir}" - - ebegin "Mounting tmpfs at ${tsvcdir}" - try mount -n -t tmpfs tmpfs "${tsvcdir}" \ - -o rw,mode=0644,size="${svcsize}"k - eend 0 - rc_splash "start" - - elif get_bootparam "ramfs" || \ - [ "${svcmount}" = "yes" -a "${svcfstype}" = "ramfs" ] - then - mkdir -p "${tsvcdir}" - - ebegin "Mounting ramdisk 0 at ${tsvcdir}" - try dd if=/dev/zero of=/dev/ram0 bs=1k count="${svcsize}" - try /sbin/mke2fs -i 1024 -vm0 /dev/ram0 "${svcsize}" - try mount -n -t ext2 /dev/ram0 "${tsvcdir}" -o rw - eend 0 - rc_splash "start" - fi - - if get_bootparam "adelie" - then - einfo "Server/Node low-level initialisation..." - - # Saving the kernel attributed hostname to a file for future - # initialisation selection: see /etc/init.d/switch. - cat /proc/sys/kernel/hostname > "${svcdir}/hostname" - - if checkserver - then - # For server we do pretty much a standard boot ... - einfo "Server detected." - else - # - # Low-level Node Initialisation - # - einfo "Node detected." - - init_node - fi - fi - - # If a Adelie server, or normal Gentoo box, init swap ... - if checkserver - then - # Swap needs to be activated *after* devfs has been mounted and *after* - # devfsd has been started, so that the fstab can be properly parsed - # and only if the server/Gentoo box is initialized ... - ebegin "Activating swap" - /sbin/swapon -a &> /dev/null - eend 0 - rc_splash "start" - fi - - # Set the console loglevel to 1 for a cleaner boot - # the logger should anyhow dump the ring-0 buffer at start to the - # logs, and that with dmesg can be used to check for problems - /bin/dmesg -n 1 - - # $BOOT can be used by rc-scripts to test if it is the first time - # the 'boot' runlevel is executed. Now also needed by some stuff in - # the 'sysinit' runlevel ... - export BOOT="yes" - - # We do not want to break compadibility, so we do not fully integrate - # these into /sbin/rc, but rather start them by hand ... - for x in checkroot hostname modules checkfs localmount - do - source "/etc/init.d/${x}" || error "Failed to source /etc/init.d/${x}" - start || eerror "Failed to start /etc/init.d/${x}" - - if [ "$?" -ne 0 ] - then - echo - eerror "One of more critical startup scripts failed to start!" - eerror "Please correct this, and reboot ..." - echo; echo - /sbin/sulogin ${CONSOLE} - einfo "Unmounting filesystems" - /bin/mount -a -o remount,ro & >/dev/null - einfo "Rebooting" - /sbin/reboot -f - fi - rc_splash "start" - done - - # Check that $svcdir exists ... - check_statedir - - # Since we are using tmpfs or ramfs, just bin to $tsvcdir to $svcdir - if get_bootparam "tmpfs" || get_bootparam "ramfs" || [ "${svcmount}" = "yes" ] - then - mount --bind "${tsvcdir}" "${svcdir}" - fi - - # Clear $svcdir from stale entries - rm -rf "${svcdir}"/* - - # Save our bootsplash variables if needed :) - save_splash_info - - # Update the dependency cache - /sbin/depscan.sh - - # Now that the dependency cache are up to date, make sure these - # are marked as started ... - for x in checkroot hostname modules checkfs localmount - do - ln -snf "/etc/init.d/${x}" "${svcdir}/started/${x}" - done - -fi # Sysinit ends here - -if [ "${RUNLEVEL}" = "S" -a "${argv1}" = "boot" ] -then - # $BOOT can be used by rc-scripts to test if it is the first time - # the 'boot' runlevel is executed - export BOOT="yes" - - # Fix our bootsplash variables - get_splash_info - - rc_splash "start" - -fi - -if [ "${argv1}" = "sysinit" ] -then - exit 0 -fi - -if [ -z "${argv1}" ] -then - if [ -f "${svcdir}/softlevel" ] - then - export SOFTLEVEL="`cat ${svcdir}/softlevel`" - - # Fix our bootsplash variables - get_splash_info - - rc_splash "start" - else - export SOFTLEVEL="boot" - fi -else - export SOFTLEVEL="${argv1}" -fi - -if [ ! -f "${svcdir}/softlevel" ] -then - echo "${SOFTLEVEL}" > "${svcdir}/softlevel" -fi - -# For keeping a list of services that fails during boot/halt -if [ ! -d "${svcdir}/failed" ] -then - install -d -m0755 "${svcdir}/failed" -else - rm -rf "${svcdir}"/failed/* -fi - -if [ "${SOFTLEVEL}" = "reboot" -o "${SOFTLEVEL}" = "shutdown" ] -then - - # Figure out the number scripts we are going to stop for the progress meter :) - if [ -f /proc/splash ]; then - tscripts=`ls -1R ${svcdir}/started | grep -c $` - export cscripts=$((${tscripts} - 1)) - fi - - myscripts="" - - export HALT="${SOFTLEVEL}" - -elif [ ! -d "/etc/runlevels/${SOFTLEVEL}" ] -then - eerror "ERROR: runlevel ${SOFTLEVEL} does not exist; exiting..." - exit 1 -else - myscripts="" - if [ "${SOFTLEVEL}" != "boot" ] - then - # Normal runlevels *include* boot scripts - mylevels="$(dolisting "/etc/runlevels/${SOFTLEVEL}/")" - mylevels="${mylevels} $(dolisting /etc/runlevels/boot/)" - else - # Non-normal runlevels don't include boot scripts as default - mylevels="$(dolisting "/etc/runlevels/${SOFTLEVEL}/")" - fi - for x in ${mylevels} - do - if [ -L "${x}" ] - then - myscripts="${myscripts} ${x##*/}" - fi - done -fi - -# The softscripts dir contains all scripts that belong to the -# runlevel specified in ${svcdir}/softlevel -# It needs to be a new directory, else when stopping the services -# and the old directory is not intact, things get broken - -install -d -m0755 "${svcdir}/softscripts.new" - -for x in ${myscripts} -do - if [ ! -e "/etc/init.d/${x}" ] - then - ewarn "WARNING: /etc/init.d/${x} missing; skipping..." - continue - fi - # The -f eliminates a warning if the symlink already exists, - # which can happen if a service is in both the boot level and - # the current "normal" runlevel - ln -snf "/etc/init.d/${x}" "${svcdir}/softscripts.new/${x}" -done - -dep_stop() { - local x="" - local needsme="" - local myservice="" - local depservice="" - - [ ! -L "$1" ] && continue - if [ ! -e "$1" ] - then - # Remove dud symlinks - rm -f "$1" - continue - fi - myservice="${1##*/}" - - if [ ! -L "${svcdir}/softscripts.new/${myservice}" ] - then - # Candidate for zapping - - # Should not work for 'use' - if [ ! -d "${svcdir}/need/${myservice}" ] - then - # Nothing depends on me - if [ -L "${svcdir}/started/${myservice}" ] - then - "$1" stop - fi - else - # Something may depend on me - needsme=0 - for dep in $(dolisting "${svcdir}/need/${myservice}/") - do - if [ -L "${svcdir}/softscripts.new/${dep##*/}" -a -e "${dep}" ] - then - # This dep is valid - needsme=1 - break - fi - done - if [ "${needsme}" -eq 0 ] - then - if [ -L "${svcdir}/started/${myservice}" ] - then - "$1" stop - fi - fi - fi - fi -} - -# Stop services -for i in $(dolisting "${svcdir}/started/") -do - dep_stop "${i}" -# echo "dep_stop used" -done - -# Only change softlevel AFTER all the services have been stopped, -# else they will not get the depend's right (wrong SOFTLEVEL) - -echo "${SOFTLEVEL}" > "${svcdir}/softlevel" - -if [ "${SOFTLEVEL}" = "reboot" -o "${SOFTLEVEL}" = "shutdown" ] -then - source /sbin/functions.sh - - # Make sure that our $svcdir are clean for next reboot ... - rm -rf "${svcdir}"/* - - source /etc/init.d/halt.sh - - if [ "${SOFTLEVEL}" = "reboot" ] - then - source /etc/init.d/reboot.sh - else - source /etc/init.d/shutdown.sh - fi - # Should never get here - exit 0 -fi - -# Move the old softscritps directory to a different one -# and make the new softscripts directory the current - -mv -f "${svcdir}/softscripts" "${svcdir}/softscripts.old" -mv -f "${svcdir}/softscripts.new" "${svcdir}/softscripts" - -dep_start() { - local x="" - local myservice="" - local depservice="" - - if [ ! -L "$1" ] - then - continue - fi - # Only start a script if it isn't already running - myservice="${1##*/}" - if [ ! -L "${svcdir}/started/${myservice}" ] - then - "$1" start - rc_splash "start" - fi -} - -# Fix our bootsplash variables -get_splash_info - -rc_splash "start" - -# Start scripts -for i in $(dolisting "${svcdir}/softscripts/") -do - dep_start "${i}" - rc_splash "${i} start" -done - -# Clean the old runlevel -rm -rf "${svcdir}/softscripts.old" &> /dev/null - -# Depends gets nuked, so update them -# (this problem should be solved now, but i think it will be a good idea -# to recreate the deps after a change in runlevel) - -#/sbin/depscan.sh &>/dev/null - -# We want devfsd running after a change of runlevel (this is mostly if we return -# from runlevel 'single') -if [ -z "`ps --no-heading -C 'devfsd'`" -a \ - -n "`gawk '/\/dev devfs/ { print }' /proc/mounts 2> /dev/null`" ] -then - /sbin/devfsd /dev &> /dev/null -fi - -# Runlevel end, so clear stale fail list -rm -rf "${svcdir}/failed" &> /dev/null - -# If we were in the boot runlevel, it is done now ... -[ -n "${BOOT}" ] && unset BOOT - -# Save our bootsplash variables if needed :) -save_splash_info - -# vim:ts=4 diff --git a/src/livecd/profiles/kde/aux-files/rc.sbin b/src/livecd/profiles/kde/aux-files/rc.sbin deleted file mode 100644 index 2b2fa618e2..0000000000 --- a/src/livecd/profiles/kde/aux-files/rc.sbin +++ /dev/null @@ -1,443 +0,0 @@ -#!/bin/bash -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/kde/aux-files/Attic/rc.sbin,v 1.1 2003/10/19 03:10:55 livewire Exp $ - - -trap ":" INT QUIT TSTP -source /sbin/functions.sh -umask 022 - -try() { - local retval=0 - # this works fine in test, but real life booting, fails for mounting /proc - # for instance, if we only check $?, thus we need to [ -n "${errstr}" ] - # as well - local errstr - errstr="$((eval $*) 2>&1 >/dev/null)" - retval=$? - if [ "${retval}" -ne 0 ] || \ - ([ -n "$(echo $* | egrep 'mount')" -a -n "${errstr}" ]) - then - echo -e "${ENDCOL}${NORMAL}[${BAD} oops ${NORMAL}]" - echo - eerror "The \"${1}\" command failed with error:" - echo - echo "${errstr#*: }" - echo - eerror "Since this is a critical task, startup cannot continue." - echo - /sbin/sulogin ${CONSOLE} - /sbin/reboot -f - fi - return ${retval} -} - -# save $1 -argv1="$1" - -# first time boot stuff goes here -if [ "${RUNLEVEL}" = "S" -a "${argv1}" = "boot" ] -then - # setup initial $PATH just in case - PATH="/bin:/sbin:/usr/bin:/usr/sbin:${PATH}" - - echo -e "${GOOD}Gentoo Linux${GENTOO_VERS}; \e[34;01mhttp://www.gentoo.org/${NORMAL}" - echo -e " Copyright 2001-2002 Gentoo Technologies, Inc.; Distributed under the GPL" - - ebegin "Mounting /proc"; \ - try mount -n /proc; \ - eend $? - - ebegin "Starting metalog" - start-stop-daemon --start --quiet --exec /usr/sbin/metalog \ - -- -p /var/run/metalog.pid --daemonize ${METALOG_OPTS} - eend $? "Failed to start metalog" - - # check if the user disabled devfs - devfs="yes" - get_bootparam "nodevfs" - if [ "$?" -eq 0 ] - then - devfs="no" - fi - - # fix weird bug where there is a /dev/.devfsd in a unmounted /dev - mymounts="$(awk '$3 ~ "devfs" { print $0 }' /proc/mounts)" - if [ -e /dev/.devfsd -a -z "${mymounts}" ] - then - rm -f /dev/.devfsd &>/dev/null - fi - - # with the new way, /dev can be mounted by the kernel ... - if [ "${devfs}" = "yes" -a ! -e /dev/.devfsd ] - then - mymounts="$(awk '$2 ~ "devfs" { print $0 }' /proc/filesystems)" - # is devfs support compiled in? - if [ -n "${mymounts}" ] - then - ebegin "Mounting devfs at /dev"; \ - try mount -n -t devfs none /dev; \ - eend $? - else - clear - echo - einfo "The Gentoo Linux system initialization scripts have detected that your" - einfo "kernel has been compiled without DEVFS support. Because Gentoo Linux" - einfo "has been designed to work with DEVFS, it is required that you compile" - einfo "support for it into your kernel. Please read the 'Gentoo Linux from" - einfo "source (build) CD Installation Guide' at:" - echo - einfo " http://www.gentoo.org/doc/build.html" - echo - einfo "for more information on how to do this." - echo - read -t 15 -p "(hit Enter to continue or wait 15 seconds...)" - fi - fi - - # need devfsd running now so that /dev/ram0 exists if we need it - mymounts="$(cat /proc/mounts)" - if [ "${devfs}" = "yes" -a -e /dev/.devfsd -a \ - "${mymounts/devfs//}" != "${mymounts}" ] - then - ebegin "Starting devfsd" - /sbin/devfsd /dev &>/dev/null - eend $? - fi - - if [ ! -d ${svcdir} ] - then - echo - eerror "For Gentoo Linux to function properly, \"${svcdir}\" need to exist." - eerror "Please mount your root partition read/write, and execute:" - echo - eerror " # mkdir -p ${svcdir}" - echo - echo - /sbin/sulogin ${CONSOLE} - mount -a -o remount,ro &>/dev/null - /sbin/reboot -f - fi - - # mount either a ramdisk or tmpfs and do dep scan - - # should we use tmpfs or a ramdisk ? - if ! get_bootparam "notmpfs" && \ - ([ "${svcfstype}" = "tmpfs" -o "${svcfstype}" != "ramfs" ]) - then - ebegin "Mounting tmpfs at ${svcdir}"; \ - try mount -n -t tmpfs tmpfs ${svcdir} \ - -o rw,mode=0644,size=${svcsize}k; \ - eend 0 - else - ebegin "Mounting ramdisk 0 at ${svcdir}"; \ - try dd if=/dev/zero of=/dev/ram0 bs=1k count=${svcsize}; \ - try /sbin/mke2fs -i 1024 -vm0 /dev/ram0 ${svcsize}; \ - try mount -n -t ext2 /dev/ram0 ${svcdir} -o rw; \ - eend 0 - fi - - if ! get_bootparam "notmpfs" && get_bootparam "ngpt" - then - # POSIX shared memory support - ebegin "Mounting POSIX shared memory" - mkdir -p /dev/shm - try mount -n -t tmpfs tmpfs /dev/shm - eend $? - - # NGPT support (http://www-124.ibm.com/developerworks/oss/pthreads/) - if [ -x /usr/bin/ngptinit ] - then - ebegin "Initializing NGPT" - /usr/bin/ngptinit &> /dev/null || : - eend $? - fi - fi - - /sbin/depscan.sh - - # Saving the kernel attributed hostname to a file for future - # initialisation selection: see /etc/init.d/switch. - get_bootparam "adelie" && cat /proc/sys/kernel/hostname > ${svcdir}/hostname - - get_bootparam "adelie" && einfo "Server/Node low-level initialisation..." - if checkserver - then - get_bootparam "adelie" && einfo "Server detected." - - # swap needs to be activated *after* devfs has been mounted and *after* - # devfsd has been started, so that the fstab can be properly parsed - # and only if the server is initialized - ebegin "Activating swap" - /sbin/swapon -a &>/dev/null - eend 0 - else - # - # Low-level Node Initialisation - # - einfo "Node detected." - ebegin "Importing local userspace on node" - - try mount -t tmpfs none ${shmdir} - - for DIR in /etc /var /root; - do - - if grep -q -v "^${DIR}[[:space:]]" /etc/exports - then - mount -o nolock -n server:${DIR} ${DIR} - fi - - if [ -e /etc/conf.d/exclude/${DIR} ] - then - find ${DIR} -type d | grep -v -f /etc/conf.d/exclude/${DIR} > ${shmdir}/${DIR}.lst - else - find ${DIR} -type d > ${shmdir}/${DIR}.lst - fi - - for SUBDIR in $(cat ${shmdir}/${DIR}.lst); - do - mkdir ${shmdir}/${SUBDIR} - chmod --reference=${SUBDIR} ${shmdir}/${SUBDIR} - cp -dp ${SUBDIR}/* ${shmdir}/${SUBDIR} &>/dev/null - done - - if [ -e /etc/conf.d/exclude/${DIR} ] - then - for EMPTYDIR in $(cat /etc/conf.d/exclude/${DIR}); - do - mkdir ${shmdir}/${EMPTYDIR} - chmod --reference=${SUBDIR} ${shmdir}/${SUBDIR} - done - fi - - umount -n ${DIR} > /dev/null - mount -n -o bind ${shmdir}/${DIR} ${DIR} - done - - mkdir ${shmdir}/tmp - chmod 0777 ${shmdir}/tmp - mount -n -o bind ${shmdir}/tmp /tmp - - cat /proc/mounts > /etc/mtab - - cp -f /etc/inittab.node /etc/inittab - [ -e /etc/fstab.node ] && cp -f /etc/fstab.node /etc/fstab - killall -1 init - - eend 0 - fi - - # set the console loglevel to 1 for a cleaner boot - # the logger should anyhow dump the ring-0 buffer at start to the - # logs, and that with dmesg can be used to check for problems - - /bin/dmesg -n 1 - - # $BOOT can be used by rc-scripts to test if it is the first time - # the 'boot' runlevel is executed - - export BOOT="yes" - -fi # boot ends here - -if [ -z "${argv1}" ] -then - if [ -f ${svcdir}/softlevel ] - then - export SOFTLEVEL="$(cat ${svcdir}/softlevel)" - else - export SOFTLEVEL="boot" - fi -else - export SOFTLEVEL="${argv1}" -fi - -if [ ! -f ${svcdir}/softlevel ] -then - echo "${SOFTLEVEL}" > ${svcdir}/softlevel -fi - -# for keeping a list of services that fails during boot/halt -if [ ! -d ${svcdir}/failed ] -then - install -d -m0755 ${svcdir}/failed -else - rm -rf ${svcdir}/failed/* -fi - -if [ "${SOFTLEVEL}" = "reboot" -o "${SOFTLEVEL}" = "shutdown" ] -then - myscripts="" -elif [ ! -d /etc/runlevels/${SOFTLEVEL} ] -then - eerror "ERROR: runlevel ${SOFTLEVEL} does not exist; exiting..." - exit 1 -else - myscripts="" - if [ "${SOFTLEVEL}" != "boot" ] - then - # normal runlevels *include* boot scripts - mylevels="$(dolisting /etc/runlevels/${SOFTLEVEL}/)" - mylevels="${mylevels} $(dolisting /etc/runlevels/boot/)" - else - # non-normal runlevels don't include boot scripts as default - mylevels="$(dolisting /etc/runlevels/${SOFTLEVEL}/)" - fi - for x in ${mylevels} - do - if [ -L "${x}" ] - then - myscripts="${myscripts} ${x##*/}" - fi - done -fi - -# the softscripts dir contains all scripts that belong to the -# runlevel specified in ${svcdir}/softlevel -# it needs to be a new directory, else when stopping the services -# and the old directory is not intact, things get broken - -install -d -m0755 ${svcdir}/softscripts.new - -for x in ${myscripts} -do - if [ ! -e "/etc/init.d/${x}" ] - then - ewarn "WARNING: /etc/init.d/${x} missing; skipping..." - continue - fi - # the -f eliminates a warning if the symlink already exists, - # which can happen if a service is in both the boot level and - # the current "normal" runlevel - ln -sf /etc/init.d/${x} ${svcdir}/softscripts.new/${x} -done - -dep_stop() { - local x="" - local needsme="" - local myservice="" - local depservice="" - [ ! -L $1 ] && continue - if [ ! -e $1 ] - then - # remove dud symlinks - rm $1 - continue - fi - myservice="${1##*/}" - - if [ ! -L "${svcdir}/softscripts.new/${myservice}" ] - then - # candidate for zapping - - # should not work for 'use' - if [ ! -d "${svcdir}/need/${myservice}" ] - then - # nothing depends on me - if [ -L "${svcdir}/started/${myservice}" ] - then - $1 stop - fi - else - # something may depend on me - needsme=0 - for dep in $(dolisting ${svcdir}/need/${myservice}/) - do - if [ -L "${svcdir}/softscripts.new/${dep##*/}" -a -e ${dep} ] - then - # this dep is valid - needsme=1 - break - fi - done - if [ "${needsme}" -eq 0 ] - then - if [ -L "${svcdir}/started/${myservice}" ] - then - $1 stop - fi - fi - fi - fi -} - -# stop services -for i in $(dolisting ${svcdir}/started/) -do - dep_stop ${i} -done - -# Only change softlevel AFTER all the services have been stopped, -# else they will not get the depend's right (wrong SOFTLEVEL) - -echo "${SOFTLEVEL}" > ${svcdir}/softlevel - -if [ "${SOFTLEVEL}" = "reboot" -o "${SOFTLEVEL}" = "shutdown" ] -then - source /sbin/functions.sh - source /etc/init.d/halt.sh - if [ "${SOFTLEVEL}" = "reboot" ] - then - source /etc/init.d/reboot.sh - else - source /etc/init.d/shutdown.sh - fi - # should never get here - exit 0 -fi - -# move the old softscritps directory to a different one -# and make the new softscripts directory the current - -mv ${svcdir}/softscripts ${svcdir}/softscripts.old &>/dev/null -mv ${svcdir}/softscripts.new ${svcdir}/softscripts &>/dev/null - -dep_start() { - local x="" - local myservice="" - local depservice="" - if [ ! -L $1 ] - then - continue - fi - # only start a script if it isn't already running - myservice="${1##*/}" - if [ ! -L "${svcdir}/started/${myservice}" ] - then - $1 start - fi -} - -# start scripts -for i in $(dolisting ${svcdir}/softscripts/) -do - dep_start ${i} -done - -# clean the old runlevel -rm -rf ${svcdir}/softscripts.old &>/dev/null - -# depends gets nuked, so update them -# (this problem should be solved now, but i think it will be a good idea -# to recreate the deps after a change in runlevel) - -#/sbin/depscan.sh &>/dev/null - -# we want devfsd running after a change of runlevel (this is mostly if we return -# from runlevel 'single') -if [ -z "$(ps -A | egrep 'devfsd')" -a \ - -n "$(cat /proc/mounts | egrep '/dev devfs')" ] -then - /sbin/devfsd /dev &>/dev/null -fi - -# runlevel end, so clear stale fail list -rm -rf ${svcdir}/failed &>/dev/null - -# if we were in the boot runlevel, it is done now ... -[ -n "${BOOT}" ] && unset BOOT - - -# vim:ts=4 diff --git a/src/livecd/profiles/kde/aux-files/resolv.conf b/src/livecd/profiles/kde/aux-files/resolv.conf deleted file mode 100644 index ab1cae14ce..0000000000 --- a/src/livecd/profiles/kde/aux-files/resolv.conf +++ /dev/null @@ -1 +0,0 @@ -nameserver ##NS1## diff --git a/src/livecd/profiles/kde/aux-files/root.tar.bz2 b/src/livecd/profiles/kde/aux-files/root.tar.bz2 Binary files differdeleted file mode 100644 index fc9a752a71..0000000000 --- a/src/livecd/profiles/kde/aux-files/root.tar.bz2 +++ /dev/null diff --git a/src/livecd/profiles/kde/aux-files/splash b/src/livecd/profiles/kde/aux-files/splash deleted file mode 100644 index b83f3c8351..0000000000 --- a/src/livecd/profiles/kde/aux-files/splash +++ /dev/null @@ -1,71 +0,0 @@ -#!/bin/bash -# -# splash.sh - script to paint progress bar during -# system startup/shutdown. This script is solely run -# by the init scripts (shell function rc_splash) -# -# (w) 2002-2003 Stefan Reinauer, <stepan@suse.de> -# Modified for Gentoo by Jay Pfeifer <pfeifer@gentoo.org> -# It's licensed under GPL, of course. -# -# this script expects the following environment variables: -# sscripts = number of start scripts to be executed for runlevel change -# kscripts = number of stop scripts to be executed for runlevel change -# progress = number of currently executed start/stop script - -# execute splash binary utility because we are a wrapper: -if [ "$1" == "-s" -o "$1" == "-u" -o "$1" == "-n" -o "$1" == "-f" ]; then - exec /sbin/splash.bin $* -else - ( exec /sbin/splash.bin "$*" ) -fi - -# assertions -test -r /proc/splash || exit 0 -sparam=$1 - -# - -function box() { true; } # ignore box descriptions in the config file - -if [ -f /etc/bootsplash/default/config/bootsplash-`fbresolution`.cfg ]; then - . /etc/bootsplash/default/config/bootsplash-`fbresolution`.cfg -fi - -# Print text string.. -if [ "${sparam}" = "begin" ]; then - fbtruetype.static -x ${text_x} -y ${text_y} -t ${text_color} -s ${text_size} \ - "Booting the system... Press F2 for verbose mode" 2> /dev/null - export startnum=$(( ${sscripts} + 5 )) - -fi - -#if [ "${sparam}" = "end" ]; then - # fbtruetype.static -x ${text_x} -y ${text_y} -t ${text_color} -s ${text_size} \ - # "Shutting down the system... Press F2 for verbose mode" 2> /dev/null -# export stopnum=$(( ${cscripts} / 4 )) -#fi - -# Paint progressbar.. -#if [ "$1" = "start" ]; then -if [ "${#sparam}" -ge "5" ] && \ - [ `expr "${sparam}" : '.*\(.....\)'` = "start" ]; then - export startnum=$(( ${sscripts} + 5 )) - echo "show $(( 65534 * ( ${progress} + 1 ) / ${startnum} ))" > /proc/splash - #echo ${progress} ${sscripts} ${startnum} -# fbtruetype -x ${text_x} -y $((${text_y} + 70)) -t ${text_color} -s ${text_size} \ -# " " 2> /dev/null -# fbtruetype -x ${text_x} -y $((${text_y} + 70)) -t ${text_color} -s ${text_size} \ -# "$1" 2> /dev/null -fi -#if [ "$1" = "stop" ]; then -if [ "${#sparam}" -ge "4" ] && \ - [ `expr "${sparam}" : '.*\(....\)'` = "stop" ]; then - export stopnum=$(( ${cscripts} / 4 )) - echo "show $(( 65534 * ( ${progress} + 1 ) / ${stopnum} ))" > /proc/splash - #echo ${progress} ${sscripts} ${stopnum} -# fbtruetype -x ${text_x} -y $((${text_y} + 70)) -t ${text_color} -s ${text_size} \ -# " " 2> /dev/null -# fbtruetype -x ${text_x} -y $((${text_y} + 70)) -t ${text_color} -s ${text_size} \ -# "$1" 2> /dev/null -fi diff --git a/src/livecd/profiles/kde/aux-files/splash.bin b/src/livecd/profiles/kde/aux-files/splash.bin Binary files differdeleted file mode 100644 index be47b88ee5..0000000000 --- a/src/livecd/profiles/kde/aux-files/splash.bin +++ /dev/null diff --git a/src/livecd/profiles/kde/aux-files/splash.sh b/src/livecd/profiles/kde/aux-files/splash.sh deleted file mode 100644 index a25b473471..0000000000 --- a/src/livecd/profiles/kde/aux-files/splash.sh +++ /dev/null @@ -1,26 +0,0 @@ -# Prelim code to add bootsplash support to Gentoo :) -rc_splash() { - test -f /proc/splash || return 0 - if [ -n "`grep 'splash=silent' /proc/cmdline 2>/dev/null`" ]; then - /sbin/splash "$1" - export progress=$(( ${progress} + 1 )) - fi -} - -# Allows us to save variable info between runlevels (ie. rc iterations) -save_splash_info() { - if [ -f /proc/splash ]; then - echo ${sscripts} > ${svcdir}/sscripts.tmp - echo ${progress} > ${svcdir}/progress.tmp - fi -} - -# Retrieve splash state info -get_splash_info() { - if [ -f /proc/splash ]; then - export sscripts=`cat ${svcdir}/sscripts.tmp` - export progress=`cat ${svcdir}/progress.tmp` - fi -} - - diff --git a/src/livecd/profiles/kde/aux-files/usleep b/src/livecd/profiles/kde/aux-files/usleep Binary files differdeleted file mode 100644 index 4bee8c4bc1..0000000000 --- a/src/livecd/profiles/kde/aux-files/usleep +++ /dev/null diff --git a/src/livecd/profiles/kde/aux-files/xfree-nvidia b/src/livecd/profiles/kde/aux-files/xfree-nvidia deleted file mode 100644 index 384c866ad7..0000000000 --- a/src/livecd/profiles/kde/aux-files/xfree-nvidia +++ /dev/null @@ -1,290 +0,0 @@ -########################################################################## -# Sample XF86Config file for NVIDIA XFree86 drivers. -# -# Refer to the XF86Config(4/5) man page for details about the format of -# this file. -# -# Be sure to replace the monitor values with correct values for your -# monitor! -########################################################################## - - -Section "Files" - - RgbPath "/usr/X11R6/lib/X11/rgb" - FontPath "unix/:-1" - -EndSection - - -########################################################################## -# Server flags section. -########################################################################## - -Section "ServerFlags" - - # Uncomment this to cause a core dump at the spot where a signal is - # received. This may leave the console in an unusable state, but may - # provide a better stack trace in the core dump to aid in debugging - #NoTrapSignals - - # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence - # This allows clients to receive this key event. - #DontZap - - # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching - # sequences. This allows clients to receive these key events. - #DontZoom - - # This allows the server to start up even if the - # mouse device can't be opened/initialised. - AllowMouseOpenFail - -EndSection - - -########################################################################## -# Input devices -########################################################################## - -# -# Keyboard section -# -Section "InputDevice" - - Identifier "Keyboard1" - Driver "Keyboard" - Option "AutoRepeat" "250 30" - - Option "XkbRules" "xfree86" - Option "XkbModel" "pc105" - Option "XkbLayout" "us" - -EndSection - - -# -# Pointer section -# -Section "InputDevice" - - Identifier "Mouse1" - Driver "mouse" - Option "Protocol" "IMPS/2" - Option "Device" "/dev/input/mice" - Option "Buttons" "7" - Option "ZAxisMapping" "4 5" -EndSection - - -########################################################################## -# Module section -########################################################################## - -Section "Module" - - Load "dbe" - - # Load the glx module. - Load "glx" - - Load "extmod" - - Load "type1" - Load "freetype" -EndSection - - -########################################################################## -# Monitor section -########################################################################## - -Section "Monitor" - - Identifier "MyMonitor" - VendorName "Mitsubisi" - ModelName "Diamond Plus 120u" - - # be sure to replace these values with values appropriate for your - # monitor! -# HorizSync 31-82 -# VertRefresh 55-120 - -EndSection - - -########################################################################## -# Graphics device section(s) -########################################################################## - -Section "Device" - Identifier "NV AGP" - VendorName "nvidia" - Driver "nvidia" - # update this with the PCI id of your card. Consult the output - # of the 'lspci' command. -# BusID "PCI:1:0:0" - Option "NoLogo" "1" -# Option "NoDDC" "1" -EndSection - -Section "Device" - Identifier "NV PCI" - VendorName "nvidia" - Driver "nvidia" - # update this with the PCI id of your card. Consult the output - # of the 'lspci' command. - BusID "PCI:0:13:0" -EndSection - -Section "Device" - Identifier "NV AGP TwinView" - VendorName "nvidia" - Driver "nvidia" - # update this with the PCI id of your card. Consult the output - # of the 'lspci' command. - BusID "PCI:1:0:0" - - # sample twinview setup - Option "TwinView" - # be sure to replace the HorizSync and VertRefresh with correct values - # for your monitor! - Option "SecondMonitorHorizSync" "31-82" - Option "SecondMonitorVertRefresh" "55-120" - Option "TwinViewOrientation" "RightOf" - Option "MetaModes" "1280x1024,1280x1024; 1024x768,1024x768" - Option "ConnectedMonitor" "crt,crt" -EndSection - - -########################################################################## -# Screen sections -########################################################################## - -# -# screen section for an nvidia AGP card -# -Section "Screen" - Identifier "Screen AGP" - Device "NV AGP" - Monitor "MyMonitor" - DefaultColorDepth 24 - DefaultFbBpp 32 - Subsection "Display" - Depth 8 - Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x400" - EndSubsection - Subsection "Display" - Depth 16 - Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - Subsection "Display" - Depth 24 - Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - -EndSection - - -# -# screen section for an nvidia PCI card -# -Section "Screen" - Identifier "Screen PCI" - Device "NV PCI" - Monitor "MyMonitor" - DefaultColorDepth 24 - Subsection "Display" - Depth 8 - Modes "1280x1024" "1024x768" "800x600" "640x400" - EndSubsection - Subsection "Display" - Depth 16 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - Subsection "Display" - Depth 24 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection -EndSection - -# -# screen section for an nvidia AGP TwinView card -# (look at the appropriate Device section) -# -Section "Screen" - Identifier "Screen AGP TwinView" - Device "NV AGP TwinView" - Monitor "MyMonitor" - DefaultColorDepth 24 - Subsection "Display" - Depth 8 - Modes "1280x1024" "1024x768" "800x600" "640x400" - EndSubsection - Subsection "Display" - Depth 16 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - Subsection "Display" - Depth 24 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection -EndSection - - -########################################################################## -# ServerLayout sections -# (invoke using the '-layout' option of 'startx'. -########################################################################## - -# -# just one agp card -# -Section "ServerLayout" - Identifier "AGP" - Screen "Screen AGP" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# just one pci card -# -Section "ServerLayout" - Identifier "PCI" - Screen "Screen PCI" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# 2 cards, non twinview -# -Section "ServerLayout" - Identifier "Both" - Screen "Screen AGP" - Screen "Screen PCI" LeftOf "Screen AGP" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# just one agp twinview card -# -Section "ServerLayout" - Identifier "AGPTwinView" - Screen "Screen AGP TwinView" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# 2 cards, one agp twinview and one pci (3 monitors total) -# -Section "ServerLayout" - Identifier "BothTwinView" - Screen "Screen AGP TwinView" - Screen "Screen PCI" LeftOf "Screen AGP TwinView" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection diff --git a/src/livecd/profiles/kde/bash_profile b/src/livecd/profiles/kde/bash_profile deleted file mode 100644 index cd8b190774..0000000000 --- a/src/livecd/profiles/kde/bash_profile +++ /dev/null @@ -1,6 +0,0 @@ -#!/bin/bash -if [ -e /etc/startgame ] - then - rm -f /etc/startgame - /usr/sbin/x-setup -fi diff --git a/src/livecd/profiles/kde/boot.msg b/src/livecd/profiles/kde/boot.msg deleted file mode 100644 index dba36228ba..0000000000 --- a/src/livecd/profiles/kde/boot.msg +++ /dev/null @@ -1,4 +0,0 @@ -17 gentoo.lss - -Gentoo Linux 1.4 http://www.gentoo.org/ RELEASE: 1.4-Release -Enter to boot; F2 for options. diff --git a/src/livecd/profiles/kde/boot1.msg b/src/livecd/profiles/kde/boot1.msg deleted file mode 100644 index f81f7531f7..0000000000 --- a/src/livecd/profiles/kde/boot1.msg +++ /dev/null @@ -1,24 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - -Welcome .... - -Hold shift key while booting for options menu , Then press F2 for help diff --git a/src/livecd/profiles/kde/ck-config b/src/livecd/profiles/kde/ck-config deleted file mode 100644 index 407f35260d..0000000000 --- a/src/livecd/profiles/kde/ck-config +++ /dev/null @@ -1,1233 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_LOLAT=y -# CONFIG_LOLAT_SYSCTL is not set -# CONFIG_M386 is not set -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M686 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -CONFIG_MK7=y -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -CONFIG_X86_WP_WORKS_OK=y -CONFIG_X86_INVLPG=y -CONFIG_X86_CMPXCHG=y -CONFIG_X86_XADD=y -CONFIG_X86_BSWAP=y -CONFIG_X86_POPAD_OK=y -# CONFIG_RWSEM_GENERIC_SPINLOCK is not set -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_X86_L1_CACHE_SHIFT=6 -CONFIG_X86_HAS_TSC=y -CONFIG_X86_GOOD_APIC=y -CONFIG_X86_USE_3DNOW=y -CONFIG_X86_PGE=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_F00F_WORKS_OK=y -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -CONFIG_PREEMPT=y -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set -CONFIG_X86_TSC=y -CONFIG_HAVE_DEC_LOCK=y - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -CONFIG_CARDBUS=y -CONFIG_TCIC=y -CONFIG_I82092=y -CONFIG_I82365=y - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -# CONFIG_CISS_SCSI_TAPE is not set -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -# CONFIG_CDROM_PKTCDVD is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -# CONFIG_BLK_DEV_IDESCSI is not set -CONFIG_IDE_TASK_IOCTL=y -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_CMD680 is not set -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -# CONFIG_PDC202XX_BURST is not set -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -# CONFIG_SCSI is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_BOOT is not set -# CONFIG_FUSION_ISENSE is not set -# CONFIG_FUSION_CTL is not set -# CONFIG_FUSION_LAN is not set - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -# CONFIG_IEEE1394_SBP2 is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -CONFIG_PCMCIA_IBMTR=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_AIRONET4500_CS=m - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=m - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -CONFIG_AGP_INTEL=y -CONFIG_AGP_I810=y -CONFIG_AGP_VIA=y -CONFIG_AGP_AMD=y -CONFIG_AGP_AMD_8151=y -CONFIG_AGP_SIS=y -CONFIG_AGP_ALI=y -CONFIG_AGP_SWORKS=y -CONFIG_DRM=y -# CONFIG_DRM_OLD is not set -CONFIG_DRM_NEW=y -CONFIG_DRM_TDFX=m -CONFIG_DRM_R128=m -CONFIG_DRM_RADEON=m -CONFIG_DRM_I810=m -CONFIG_DRM_I810_XFREE_41=y -CONFIG_DRM_I830=m -CONFIG_DRM_MGA=m -CONFIG_DRM_SIS=m - -# -# PCMCIA character devices -# -CONFIG_PCMCIA_SERIAL_CS=m -CONFIG_SYNCLINK_CS=m -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_SUPERMOUNT is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_DMAPI is not set -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_SOUND_ALI5455=m -CONFIG_SOUND_BT878=m -CONFIG_SOUND_CMPCI=m -# CONFIG_SOUND_CMPCI_FM is not set -# CONFIG_SOUND_CMPCI_MIDI is not set -# CONFIG_SOUND_CMPCI_JOYSTICK is not set -# CONFIG_SOUND_CMPCI_CM8738 is not set -CONFIG_SOUND_EMU10K1=m -# CONFIG_MIDI_EMU10K1 is not set -CONFIG_SOUND_FUSION=m -CONFIG_SOUND_CS4281=m -CONFIG_SOUND_ES1370=m -CONFIG_SOUND_ES1371=m -CONFIG_SOUND_ESSSOLO1=m -CONFIG_SOUND_MAESTRO=m -CONFIG_SOUND_MAESTRO3=m -CONFIG_SOUND_FORTE=m -CONFIG_SOUND_ICH=m -CONFIG_SOUND_RME96XX=m -CONFIG_SOUND_SONICVIBES=m -CONFIG_SOUND_TRIDENT=m -CONFIG_SOUND_MSNDCLAS=m -# CONFIG_MSNDCLAS_HAVE_BOOT is not set -CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin" -CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin" -CONFIG_SOUND_MSNDPIN=m -# CONFIG_MSNDPIN_HAVE_BOOT is not set -CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin" -CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin" -CONFIG_SOUND_VIA82CXXX=m -# CONFIG_MIDI_VIA82CXXX is not set -CONFIG_SOUND_OSS=m -# CONFIG_SOUND_TRACEINIT is not set -# CONFIG_SOUND_DMAP is not set -CONFIG_SOUND_AD1816=m -CONFIG_SOUND_SGALAXY=m -CONFIG_SOUND_ADLIB=m -CONFIG_SOUND_ACI_MIXER=m -CONFIG_SOUND_CS4232=m -CONFIG_SOUND_SSCAPE=m -CONFIG_SOUND_GUS=m -# CONFIG_SOUND_GUS16 is not set -# CONFIG_SOUND_GUSMAX is not set -CONFIG_SOUND_VMIDI=m -CONFIG_SOUND_TRIX=m -CONFIG_SOUND_MSS=m -CONFIG_SOUND_MPU401=m -CONFIG_SOUND_NM256=m -CONFIG_SOUND_MAD16=m -# CONFIG_MAD16_OLDCARD is not set -CONFIG_SOUND_PAS=m -# CONFIG_PAS_JOYSTICK is not set -CONFIG_SOUND_PSS=m -# CONFIG_PSS_MIXER is not set -# CONFIG_PSS_HAVE_BOOT is not set -CONFIG_SOUND_SB=m -CONFIG_SOUND_AWE32_SYNTH=m -CONFIG_SOUND_WAVEFRONT=m -CONFIG_SOUND_MAUI=m -CONFIG_SOUND_YM3812=m -CONFIG_SOUND_OPL3SA1=m -CONFIG_SOUND_OPL3SA2=m -CONFIG_SOUND_YMFPCI=m -# CONFIG_SOUND_YMFPCI_LEGACY is not set -CONFIG_SOUND_UART6850=m -CONFIG_SOUND_AEDSP16=m -# CONFIG_SC6600 is not set -# CONFIG_AEDSP16_SBPRO is not set -# CONFIG_AEDSP16_MSS is not set -# CONFIG_AEDSP16_MPU401 is not set -# CONFIG_SOUND_TVMIXER is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_UHCI=y -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=y -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -CONFIG_USB_HIDDEV=y -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -# CONFIG_USB_LCD is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/kde/clean b/src/livecd/profiles/kde/clean deleted file mode 100644 index 4ac2708e66..0000000000 --- a/src/livecd/profiles/kde/clean +++ /dev/null @@ -1,55 +0,0 @@ -#!/bin/bash -if [ -z "$CD_BUILDCHROOT" ] -then - echo "Error: \$CD_BUILDCHROOT not defined." - exit 1 -fi - -#keep important C/C++/Java shared libraries -touch ${CD_BUILDCHROOT}/usr/lib/gcc-lib/*/*/*.so* -touch ${CD_BUILDCHROOT}/usr/lib/libstdc++* -touch ${CD_BUILDCHROOT}/etc/env.d/??gcc* - -mount_all -#remove extra build-related packages -chroot ${CD_BUILDCHROOT} /bin/bash -e <<EOF -source /etc/profile -emerge -C automake autoconf bison patch linux-headers man-pages || exit 1 -emerge -C sash bison flex gettext ccache addpatches man groff lib-compat python miscfiles || exit 1 -EOF -#detect chroot errors: -[ $? -ne 0 ] && chroot_die "problems cleaning packages" -umount_all - -#final cleanups -for x in /var/tmp/portage /var/db /var/empty /var/cache \ -/var/lock /tmp /usr/portage /usr/share/man /usr/share/unimaps \ -/usr/include /usr/share/dict /usr/share/doc /usr/share/ss /usr/share/state /usr/share/texinfo \ -/var/tmp /usr/lib/python2.2 /usr/lib/portage /usr/share/gettext /usr/share/rfc \ -/usr/X11R6/man /usr/X11R6/include /usr/X11R6/lib/X11/doc -do - rm -rf ${CD_BUILDCHROOT}/${x}/* ${CD_BUILDCHROOT}/${x}/.* -done -#rm -rf ${CD_BUILDCHROOT}/usr/share/keymaps - -for x in /sbin/insmod.static /sbin/sln \ -/usr/X11R6/bin/Xnest \ -/usr/X11R6/bin/Xprt \ -/usr/X11R6/bin/Xvfb -do - rm ${CD_BUILDCHROOT}/${x} -done - -#clean up the kernel source tree... -rm -rf ${CD_BUILDCHROOT}/usr/src/linux* -rm -rf ${CD_BUILDCHROOT}/var/db/pkg/sys-kernel/* -rm -rf ${CD_BUILDCHROOT}/usr/lib/gcc-lib/*/*/libgcj* -rm -rf ${CD_BUILDCHROOT}/usr/lib/*.a -rm -rf ${CD_BUILDCHROOT}/lib/*.a -rm -rf ${CD_BUILDCHROOT}/usr/X11R6/lib/*.a -#remove entire directory trees (argument 1) *except* for these files/dir trees (arguments 2+) -#zapmost /usr/share/terminfo l/linux v/vt100 v/vt102 n/nxterm x/xterm x/xterm-color -#zapmost /usr/share/locale C en_US -#zapmost /usr/X11R6/lib/X11/locale iso8859-1 iso8859-15 common en_US.UTF-8 -#[ -e ${CD_BUILDCHROOT}/usr/lib/locale ] && zapmost /usr/lib/locale en_US -zapmost /usr/share/misc magic pci.ids diff --git a/src/livecd/profiles/kde/clean.orig b/src/livecd/profiles/kde/clean.orig deleted file mode 100644 index 6e117b8175..0000000000 --- a/src/livecd/profiles/kde/clean.orig +++ /dev/null @@ -1,55 +0,0 @@ -#!/bin/bash -if [ -z "$CD_BUILDCHROOT" ] -then - echo "Error: \$CD_BUILDCHROOT not defined." - exit 1 -fi - -#keep important C/C++/Java shared libraries -touch ${CD_BUILDCHROOT}/usr/lib/gcc-lib/*/*/*.so* -touch ${CD_BUILDCHROOT}/usr/lib/libstdc++* -touch ${CD_BUILDCHROOT}/etc/env.d/??gcc* - -mount_all -#remove extra build-related packages -chroot ${CD_BUILDCHROOT} /bin/bash -e <<EOF -source /etc/profile -emerge -C autoconf automake bin86 binutils libtool m4 bison ld.so make patch linux-headers man-pages || exit 1 -emerge -C sash bison flex gettext texinfo ccache addpatches man groff lib-compat gcc python miscfiles ucl || exit 1 -EOF -#detect chroot errors: -[ $? -ne 0 ] && chroot_die "problems cleaning packages" -umount_all - -#final cleanups -for x in /var/tmp/portage /var/db /var/empty /var/cache \ -/var/lock /tmp /usr/portage /usr/share/man /usr/share/info /usr/share/unimaps \ -/usr/include /usr/share/zoneinfo /usr/share/dict /usr/share/doc /usr/share/ss /usr/share/state /usr/share/texinfo \ -/var/tmp /usr/lib/python2.2 /usr/lib/portage /usr/share/gettext /usr/share/i18n /usr/share/rfc \ -/usr/X11R6/man /usr/X11R6/include /usr/X11R6/lib/X11/doc -do - rm -rf ${CD_BUILDCHROOT}/${x}/* ${CD_BUILDCHROOT}/${x}/.* -done -#rm -rf ${CD_BUILDCHROOT}/usr/share/keymaps - -for x in /sbin/insmod.static /sbin/sln \ -/usr/X11R6/bin/Xnest \ -/usr/X11R6/bin/Xprt \ -/usr/X11R6/bin/Xvfb -do - rm ${CD_BUILDCHROOT}/${x} -done - -#clean up the kernel source tree... -rm -rf ${CD_BUILDCHROOT}/usr/src/linux* -rm -rf ${CD_BUILDCHROOT}/var/db/pkg/sys-kernel/* -rm -rf ${CD_BUILDCHROOT}/usr/lib/gcc-lib/*/*/libgcj* -rm -rf ${CD_BUILDCHROOT}/usr/lib/*.a -rm -rf ${CD_BUILDCHROOT}/lib/*.a -rm -rf ${CD_BUILDCHROOT}/usr/X11R6/lib/*.a -#remove entire directory trees (argument 1) *except* for these files/dir trees (arguments 2+) -#zapmost /usr/share/terminfo l/linux v/vt100 v/vt102 n/nxterm x/xterm x/xterm-color -#zapmost /usr/share/locale C en_US -zapmost /usr/X11R6/lib/X11/locale iso8859-1 iso8859-15 common en_US.UTF-8 -[ -e ${CD_BUILDCHROOT}/usr/lib/locale ] && zapmost /usr/lib/locale en_US -zapmost /usr/share/misc magic pci.ids diff --git a/src/livecd/profiles/kde/gaming-config b/src/livecd/profiles/kde/gaming-config deleted file mode 100644 index da32fb4475..0000000000 --- a/src/livecd/profiles/kde/gaming-config +++ /dev/null @@ -1,1243 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_LOLAT=y -# CONFIG_LOLAT_SYSCTL is not set -# CONFIG_M386 is not set -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -CONFIG_M68631=y -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -CONFIG_X86_WP_WORKS_OK=y -CONFIG_X86_INVLPG=y -CONFIG_X86_CMPXCHG=y -CONFIG_X86_XADD=y -CONFIG_X86_BSWAP=y -CONFIG_X86_POPAD_OK=y -# CONFIG_RWSEM_GENERIC_SPINLOCK is not set -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_X86_L1_CACHE_SHIFT=5 -CONFIG_X86_HAS_TSC=y -CONFIG_X86_GOOD_APIC=y -CONFIG_X86_PGE=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -CONFIG_PREEMPT=y -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set -CONFIG_X86_TSC=y -CONFIG_HAVE_DEC_LOCK=y - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -CONFIG_CARDBUS=y -CONFIG_TCIC=y -CONFIG_I82092=y -CONFIG_I82365=y - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -# CONFIG_CISS_SCSI_TAPE is not set -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -# CONFIG_CDROM_PKTCDVD is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -# CONFIG_BLK_DEV_IDESCSI is not set -CONFIG_IDE_TASK_IOCTL=y -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_CMD680 is not set -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -# CONFIG_PDC202XX_BURST is not set -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -# CONFIG_SCSI is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_BOOT is not set -# CONFIG_FUSION_ISENSE is not set -# CONFIG_FUSION_CTL is not set -# CONFIG_FUSION_LAN is not set - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -# CONFIG_IEEE1394_SBP2 is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -CONFIG_PCMCIA_IBMTR=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_AIRONET4500_CS=m - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -CONFIG_INPUT_EVDEV=y - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -CONFIG_AGP_INTEL=y -CONFIG_AGP_I810=y -CONFIG_AGP_VIA=y -CONFIG_AGP_AMD=y -CONFIG_AGP_AMD_8151=y -CONFIG_AGP_SIS=y -CONFIG_AGP_ALI=y -CONFIG_AGP_SWORKS=y -CONFIG_DRM=y -# CONFIG_DRM_OLD is not set -CONFIG_DRM_NEW=y -CONFIG_DRM_TDFX=m -CONFIG_DRM_R128=m -CONFIG_DRM_RADEON=m -CONFIG_DRM_I810=m -CONFIG_DRM_I810_XFREE_41=y -CONFIG_DRM_I830=m -CONFIG_DRM_MGA=m -CONFIG_DRM_SIS=m - -# -# PCMCIA character devices -# -CONFIG_PCMCIA_SERIAL_CS=m -CONFIG_SYNCLINK_CS=m -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_SUPERMOUNT is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_DMAPI is not set -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_SOUND_ALI5455=m -# CONFIG_SOUND_BT878 is not set -CONFIG_SOUND_CMPCI=m -# CONFIG_SOUND_CMPCI_FM is not set -# CONFIG_SOUND_CMPCI_MIDI is not set -# CONFIG_SOUND_CMPCI_JOYSTICK is not set -# CONFIG_SOUND_CMPCI_CM8738 is not set -CONFIG_SOUND_EMU10K1=m -# CONFIG_MIDI_EMU10K1 is not set -CONFIG_SOUND_FUSION=m -CONFIG_SOUND_CS4281=m -CONFIG_SOUND_ES1370=m -CONFIG_SOUND_ES1371=m -CONFIG_SOUND_ESSSOLO1=m -CONFIG_SOUND_MAESTRO=m -CONFIG_SOUND_MAESTRO3=m -CONFIG_SOUND_FORTE=m -CONFIG_SOUND_ICH=m -CONFIG_SOUND_RME96XX=m -CONFIG_SOUND_SONICVIBES=m -CONFIG_SOUND_TRIDENT=m -CONFIG_SOUND_MSNDCLAS=m -# CONFIG_MSNDCLAS_HAVE_BOOT is not set -CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin" -CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin" -CONFIG_SOUND_MSNDPIN=m -# CONFIG_MSNDPIN_HAVE_BOOT is not set -CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin" -CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin" -CONFIG_SOUND_VIA82CXXX=m -# CONFIG_MIDI_VIA82CXXX is not set -CONFIG_SOUND_OSS=m -# CONFIG_SOUND_TRACEINIT is not set -# CONFIG_SOUND_DMAP is not set -CONFIG_SOUND_AD1816=m -CONFIG_SOUND_SGALAXY=m -CONFIG_SOUND_ADLIB=m -CONFIG_SOUND_ACI_MIXER=m -CONFIG_SOUND_CS4232=m -CONFIG_SOUND_SSCAPE=m -CONFIG_SOUND_GUS=m -# CONFIG_SOUND_GUS16 is not set -# CONFIG_SOUND_GUSMAX is not set -CONFIG_SOUND_VMIDI=m -CONFIG_SOUND_TRIX=m -CONFIG_SOUND_MSS=m -CONFIG_SOUND_MPU401=m -CONFIG_SOUND_NM256=m -CONFIG_SOUND_MAD16=m -# CONFIG_MAD16_OLDCARD is not set -CONFIG_SOUND_PAS=m -# CONFIG_PAS_JOYSTICK is not set -CONFIG_SOUND_PSS=m -# CONFIG_PSS_MIXER is not set -# CONFIG_PSS_HAVE_BOOT is not set -CONFIG_SOUND_SB=m -CONFIG_SOUND_AWE32_SYNTH=m -CONFIG_SOUND_WAVEFRONT=m -CONFIG_SOUND_MAUI=m -CONFIG_SOUND_YM3812=m -CONFIG_SOUND_OPL3SA1=m -CONFIG_SOUND_OPL3SA2=m -CONFIG_SOUND_YMFPCI=m -# CONFIG_SOUND_YMFPCI_LEGACY is not set -CONFIG_SOUND_UART6850=m -CONFIG_SOUND_AEDSP16=m -# CONFIG_SC6600 is not set -# CONFIG_AEDSP16_SBPRO is not set -# CONFIG_AEDSP16_MSS is not set -# CONFIG_AEDSP16_MPU401 is not set -# CONFIG_SOUND_TVMIXER is not set - -# -# USB support -# -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=m -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=m -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -CONFIG_USB_HIDDEV=y -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -# CONFIG_USB_LCD is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/kde/gaming-config2 b/src/livecd/profiles/kde/gaming-config2 deleted file mode 100644 index 6e54131e6e..0000000000 --- a/src/livecd/profiles/kde/gaming-config2 +++ /dev/null @@ -1,1309 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_LOLAT=y -# CONFIG_LOLAT_SYSCTL is not set -# CONFIG_M386 is not set -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -# CONFIG_M68631 is not set -CONFIG_MPENTIUMIII=y -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -CONFIG_X86_WP_WORKS_OK=y -CONFIG_X86_INVLPG=y -CONFIG_X86_CMPXCHG=y -CONFIG_X86_XADD=y -CONFIG_X86_BSWAP=y -CONFIG_X86_POPAD_OK=y -# CONFIG_RWSEM_GENERIC_SPINLOCK is not set -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_X86_L1_CACHE_SHIFT=5 -CONFIG_X86_HAS_TSC=y -CONFIG_X86_GOOD_APIC=y -CONFIG_X86_PGE=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_F00F_WORKS_OK=y -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -CONFIG_SMP=y -CONFIG_PREEMPT=y -# CONFIG_MULTIQUAD is not set -# CONFIG_X86_TSC_DISABLE is not set -CONFIG_X86_TSC=y -CONFIG_HAVE_DEC_LOCK=y - -# -# General setup -# -CONFIG_NET=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -# CONFIG_PCMCIA is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_IBM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -# CONFIG_ACPI_HT_ONLY is not set -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -# CONFIG_CDROM_PKTCDVD is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -# CONFIG_NETFILTER is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_IPV6=y -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_CMD680 is not set -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -# CONFIG_PDC202XX_BURST is not set -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -# CONFIG_SCSI_SYM53C8XX is not set -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -CONFIG_EQUALIZER=y -CONFIG_TUN=m -CONFIG_ETHERTAP=y -CONFIG_NET_SB1000=m - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -CONFIG_FDDI=y -CONFIG_DEFXX=m -CONFIG_SKFP=m -CONFIG_HIPPI=y -CONFIG_ROADRUNNER=m -# CONFIG_ROADRUNNER_LARGE_RINGS is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_STRIP is not set -# CONFIG_WAVELAN is not set -# CONFIG_ARLAN is not set -# CONFIG_AIRONET4500 is not set -# CONFIG_AIRONET4500_NONCS is not set -# CONFIG_AIRONET4500_PROC is not set -# CONFIG_AIRO is not set -# CONFIG_HERMES is not set -# CONFIG_PLX_HERMES is not set -# CONFIG_PCI_HERMES is not set -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_IRDA_DEBUG=y - -# -# Infrared-port device drivers -# -CONFIG_IRTTY_SIR=m -CONFIG_IRPORT_SIR=m -CONFIG_DONGLE=y -CONFIG_ESI_DONGLE=m -CONFIG_ACTISYS_DONGLE=m -CONFIG_TEKRAM_DONGLE=m -CONFIG_GIRBIL_DONGLE=m -CONFIG_LITELINK_DONGLE=m -CONFIG_MCP2120_DONGLE=m -CONFIG_OLD_BELKIN_DONGLE=m -CONFIG_ACT200L_DONGLE=m -CONFIG_MA600_DONGLE=m -CONFIG_USB_IRDA=m -CONFIG_NSC_FIR=m -CONFIG_WINBOND_FIR=m -CONFIG_TOSHIBA_FIR=m -CONFIG_SMC_IRCC_FIR=m -CONFIG_ALI_FIR=m -CONFIG_VLSI_FIR=m - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -CONFIG_ISDN_DRV_LOOP=m -CONFIG_ISDN_DIVERSION=m - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -CONFIG_AGP_INTEL=y -CONFIG_AGP_I810=y -CONFIG_AGP_VIA=y -CONFIG_AGP_AMD=y -# CONFIG_AGP_AMD_8151 is not set -CONFIG_AGP_SIS=y -CONFIG_AGP_ALI=y -# CONFIG_AGP_SWORKS is not set -# CONFIG_DRM is not set -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_SUPERMOUNT is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -CONFIG_XFS_QUOTA=y -CONFIG_XFS_DMAPI=y -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -# CONFIG_ZISOFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -CONFIG_VIDEO_SELECT=y -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -CONFIG_FB=y -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FB_LOGO_TUX is not set -# CONFIG_FB_LOGO_LARRY is not set -# CONFIG_FB_LOGO_GENTOO is not set -# CONFIG_FB_LOGO_G is not set -# CONFIG_FB_LOGO_PENGUIN is not set -CONFIG_FB_LOGO_POWEREDBY=y -# CONFIG_FB_RIVA is not set -# CONFIG_FB_CLGEN is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_VESA=y -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_HGA is not set -CONFIG_VIDEO_SELECT=y -# CONFIG_LPP is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -CONFIG_FB_VMWARE_SVGA=y -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_FBCON_SPLASHSCREEN=y -CONFIG_FBCON_CFB16=y -# CONFIG_FBCON_ADVANCED is not set -CONFIG_FBCON_CFB8=y -CONFIG_FBCON_CFB16=y -CONFIG_FBCON_CFB24=y -CONFIG_FBCON_CFB32=y -# CONFIG_FBCON_FONTWIDTH8_ONLY is not set -# CONFIG_FBCON_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_SOUND_ALI5455=m -CONFIG_SOUND_BT878=m -CONFIG_SOUND_CMPCI=m -# CONFIG_SOUND_CMPCI_FM is not set -# CONFIG_SOUND_CMPCI_MIDI is not set -# CONFIG_SOUND_CMPCI_JOYSTICK is not set -# CONFIG_SOUND_CMPCI_CM8738 is not set -CONFIG_SOUND_EMU10K1=m -# CONFIG_MIDI_EMU10K1 is not set -CONFIG_SOUND_FUSION=m -CONFIG_SOUND_CS4281=m -CONFIG_SOUND_ES1370=m -CONFIG_SOUND_ES1371=m -CONFIG_SOUND_ESSSOLO1=m -CONFIG_SOUND_MAESTRO=m -CONFIG_SOUND_MAESTRO3=m -CONFIG_SOUND_FORTE=m -CONFIG_SOUND_ICH=m -CONFIG_SOUND_RME96XX=m -CONFIG_SOUND_SONICVIBES=m -CONFIG_SOUND_TRIDENT=m -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -CONFIG_SOUND_VIA82CXXX=m -# CONFIG_MIDI_VIA82CXXX is not set -CONFIG_SOUND_OSS=m -# CONFIG_SOUND_TRACEINIT is not set -# CONFIG_SOUND_DMAP is not set -CONFIG_SOUND_AD1816=m -CONFIG_SOUND_SGALAXY=m -CONFIG_SOUND_ADLIB=m -CONFIG_SOUND_ACI_MIXER=m -CONFIG_SOUND_CS4232=m -CONFIG_SOUND_SSCAPE=m -CONFIG_SOUND_GUS=m -# CONFIG_SOUND_GUS16 is not set -# CONFIG_SOUND_GUSMAX is not set -# CONFIG_SOUND_VMIDI is not set -CONFIG_SOUND_TRIX=m -CONFIG_SOUND_MSS=m -# CONFIG_SOUND_MPU401 is not set -CONFIG_SOUND_NM256=m -CONFIG_SOUND_MAD16=m -# CONFIG_MAD16_OLDCARD is not set -CONFIG_SOUND_PAS=m -# CONFIG_PAS_JOYSTICK is not set -CONFIG_SOUND_PSS=m -# CONFIG_PSS_MIXER is not set -# CONFIG_PSS_HAVE_BOOT is not set -CONFIG_SOUND_SB=m -# CONFIG_SOUND_AWE32_SYNTH is not set -# CONFIG_SOUND_WAVEFRONT is not set -# CONFIG_SOUND_MAUI is not set -CONFIG_SOUND_YM3812=m -CONFIG_SOUND_OPL3SA1=m -CONFIG_SOUND_OPL3SA2=m -CONFIG_SOUND_YMFPCI=m -# CONFIG_SOUND_YMFPCI_LEGACY is not set -CONFIG_SOUND_UART6850=m -# CONFIG_SOUND_AEDSP16 is not set -# CONFIG_SOUND_TVMIXER is not set - -# -# USB support -# -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=m -CONFIG_USB_UHCI_ALT=m -CONFIG_USB_OHCI=m -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -CONFIG_USB_BLUETOOTH=m -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_TIGL=m -CONFIG_USB_BRLVGER=m -CONFIG_USB_LCD=m - -# -# Bluetooth support -# -CONFIG_BLUEZ=m -CONFIG_BLUEZ_L2CAP=m -CONFIG_BLUEZ_SCO=m -CONFIG_BLUEZ_BNEP=m -CONFIG_BNEP_MC_FILTER=y -CONFIG_BNEP_PROTO_FILTER=y - -# -# Bluetooth device drivers -# -CONFIG_BLUEZ_HCIUSB=m -# CONFIG_BLUEZ_USB_ZERO_PACKET is not set -CONFIG_BLUEZ_HCIUART=m -CONFIG_BLUEZ_HCIUART_H4=y -# CONFIG_BLUEZ_HCIDTL1 is not set -# CONFIG_BLUEZ_HCIBT3C is not set -# CONFIG_BLUEZ_HCIBLUECARD is not set -CONFIG_BLUEZ_HCIVHCI=m - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/kde/gentoo.lss b/src/livecd/profiles/kde/gentoo.lss Binary files differdeleted file mode 100644 index 6c7c89c82b..0000000000 --- a/src/livecd/profiles/kde/gentoo.lss +++ /dev/null diff --git a/src/livecd/profiles/kde/gs2-config b/src/livecd/profiles/kde/gs2-config deleted file mode 100644 index da75b8b3df..0000000000 --- a/src/livecd/profiles/kde/gs2-config +++ /dev/null @@ -1,1599 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODVERSIONS=y -CONFIG_KMOD=y - -# -# Processor type and features -# -# CONFIG_LOLAT is not set -# CONFIG_LOLAT_SYSCTL is not set -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -# CONFIG_MPPRO31 is not set -# CONFIG_M68631 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MK8 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_MVIAC3_2 is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -CONFIG_TOSHIBA=m -CONFIG_I8K=m -CONFIG_THINKPAD=m -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -CONFIG_PREEMPT=y -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -CONFIG_CARDBUS=y -CONFIG_TCIC=y -CONFIG_I82092=y -CONFIG_I82365=y - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -# CONFIG_EVMS_GPT_SEGMENT_MGR is not set -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -# CONFIG_EVMS_OS2 is not set -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -CONFIG_CRYPTO=m -CONFIG_CIPHERS=y -CONFIG_CIPHER_AES=m -CONFIG_CIPHER_MARS=m -CONFIG_CIPHER_RC6=m -CONFIG_CIPHER_SERPENT=m -CONFIG_CIPHER_TWOFISH=m -CONFIG_CIPHER_3DES=m -CONFIG_CIPHER_BLOWFISH=m -CONFIG_CIPHER_CAST5=m -CONFIG_CIPHER_GOST=m -CONFIG_CIPHER_IDEA=m -CONFIG_CIPHER_RC5=m -CONFIG_CIPHER_NULL=m -CONFIG_CIPHER_DES=m -CONFIG_CIPHER_DFC=m -CONFIG_CIPHER_BLOWFISH_OLD=m -CONFIG_DIGESTS=y -CONFIG_DIGEST_MD5=m -CONFIG_DIGEST_SHA1=m -CONFIG_DIGEST_RIPEMD160=m -CONFIG_DIGEST_SHA256=m -CONFIG_DIGEST_SHA384=m -CONFIG_DIGEST_SHA512=m -CONFIG_CRYPTODEV=y -CONFIG_CRYPTOLOOP=m -CONFIG_CRYPTOLOOP_ATOMIC=y -CONFIG_CRYPTOLOOP_IV_HACK=y -CONFIG_CRYPTOLOOP_DEBUG=y -CONFIG_IPSEC_TUNNEL=m - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -# CONFIG_IP_NF_COMPAT_IPCHAINS is not set -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -CONFIG_IPX=m -CONFIG_IPX_INTERN=y -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -CONFIG_DECNET=m -# CONFIG_DECNET_SIOCGIFCONF is not set -# CONFIG_DECNET_ROUTER is not set -CONFIG_BRIDGE=m -CONFIG_X25=m -CONFIG_LAPB=m -CONFIG_LLC=y -CONFIG_NET_DIVERT=y -CONFIG_ECONET=m -# CONFIG_ECONET_AUNUDP is not set -# CONFIG_ECONET_NATIVE is not set -CONFIG_WAN_ROUTER=m -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_IPSEC is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -CONFIG_BLK_DEV_ADMA100=y -CONFIG_BLK_DEV_AEC62XX=y -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_TRIFLEX=y -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX_OLD=y -# CONFIG_PDC202XX_BURST is not set -CONFIG_BLK_DEV_PDC202XX_NEW=y -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_SC1200=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIIMAGE=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_PDC202XX=y -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m -CONFIG_BLK_DEV_ATARAID_SII=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_BUILD_FIRMWARE is not set -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -# CONFIG_SCSI_SYM53C8XX is not set -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -CONFIG_SCSI_NSP32=m -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -CONFIG_SCSI_PCMCIA=y -CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_FDOMAIN=m -CONFIG_PCMCIA_NINJA_SCSI=m -CONFIG_PCMCIA_QLOGIC=m - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_MAX_SGE=40 -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -CONFIG_EQUALIZER=y -CONFIG_TUN=m -CONFIG_ETHERTAP=y -CONFIG_NET_SB1000=m - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_TYPHOON=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_AMD8111_ETH=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -# CONFIG_EEPRO100_PIO is not set -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_R8169=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -CONFIG_FDDI=y -CONFIG_DEFXX=m -CONFIG_SKFP=m -CONFIG_HIPPI=y -CONFIG_ROADRUNNER=m -# CONFIG_ROADRUNNER_LARGE_RINGS is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -CONFIG_WAN=y -# CONFIG_HOSTESS_SV11 is not set -# CONFIG_COSA is not set -# CONFIG_COMX is not set -# CONFIG_DSCC4 is not set -# CONFIG_LANMEDIA is not set -# CONFIG_ATI_XX20 is not set -# CONFIG_SEALEVEL_4021 is not set -# CONFIG_SYNCLINK_SYNCPPP is not set -# CONFIG_HDLC is not set -# CONFIG_DLCI is not set -# CONFIG_WAN_ROUTER_DRIVERS is not set -# CONFIG_LAPBETHER is not set -# CONFIG_X25_ASY is not set -# CONFIG_SBNI is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -CONFIG_PCMCIA_IBMTR=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_AIRONET4500_CS=m - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_IRDA_DEBUG=y - -# -# Infrared-port device drivers -# -CONFIG_IRTTY_SIR=m -CONFIG_IRPORT_SIR=m -CONFIG_DONGLE=y -CONFIG_ESI_DONGLE=m -CONFIG_ACTISYS_DONGLE=m -CONFIG_TEKRAM_DONGLE=m -CONFIG_GIRBIL_DONGLE=m -CONFIG_LITELINK_DONGLE=m -CONFIG_MCP2120_DONGLE=m -CONFIG_OLD_BELKIN_DONGLE=m -CONFIG_ACT200L_DONGLE=m -CONFIG_MA600_DONGLE=m -CONFIG_USB_IRDA=m -CONFIG_NSC_FIR=m -CONFIG_WINBOND_FIR=m -# CONFIG_TOSHIBA_OLD is not set -CONFIG_TOSHIBA_FIR=m -CONFIG_SMC_IRCC_FIR=m -CONFIG_ALI_FIR=m -CONFIG_VLSI_FIR=m - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set -# CONFIG_ISDN_X25 is not set - -# -# ISDN feature submodules -# -CONFIG_ISDN_DRV_LOOP=m -CONFIG_ISDN_DIVERSION=m - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m -CONFIG_USB_AUERISDN=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=m - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_ECC is not set -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set - -# -# I2C support -# -CONFIG_I2C=m -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -CONFIG_I2C_MAINBOARD=y -CONFIG_I2C_ALI1535=m -CONFIG_I2C_ALI15X3=m -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_AMD756=m -CONFIG_I2C_AMD8111=m -# CONFIG_I2C_TSUNAMI is not set -CONFIG_I2C_I801=m -# CONFIG_I2C_I810 is not set -CONFIG_I2C_PIIX4=m -CONFIG_I2C_SIS5595=m -CONFIG_I2C_SIS630=m -CONFIG_I2C_SIS645=m -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_VIA is not set -CONFIG_I2C_VIAPRO=m -# CONFIG_I2C_VOODOO3 is not set -CONFIG_I2C_ISA=m -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_PROC=m - -# -# Hardware sensors support -# -CONFIG_SENSORS=y -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1024=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM9240=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_FSCPOS=m -CONFIG_SENSORS_FSCSCY=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_MAXILIFE=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_MTP008=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_SIS5595=m -CONFIG_SENSORS_SMSC47M1=m -CONFIG_SENSORS_THMC50=m -CONFIG_SENSORS_VIA686A=m -CONFIG_SENSORS_VT1211=m -CONFIG_SENSORS_VT8231=m -CONFIG_SENSORS_W83781D=m -# CONFIG_SENSORS_OTHER is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_IPMI_PANIC_EVENT is not set -# CONFIG_IPMI_DEVICE_INTERFACE is not set -# CONFIG_IPMI_KCS is not set -# CONFIG_IPMI_WATCHDOG is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_SCx200_GPIO is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -CONFIG_AGP_INTEL=y -CONFIG_AGP_I810=y -CONFIG_AGP_VIA=y -CONFIG_AGP_AMD=y -CONFIG_AGP_AMD_8151=y -CONFIG_AGP_SIS=y -CONFIG_AGP_ALI=y -CONFIG_AGP_SWORKS=y -CONFIG_AGP_NV=y -# CONFIG_DRM is not set - -# -# PCMCIA character devices -# -CONFIG_PCMCIA_SERIAL_CS=m -CONFIG_SYNCLINK_CS=m -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -# CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -CONFIG_VXFS_FS=m -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -CONFIG_XFS_QUOTA=y -CONFIG_XFS_DMAPI=y -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -CONFIG_CODA_FS=m -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_ROOT_NFS is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -CONFIG_NCP_FS=m -CONFIG_NCPFS_PACKET_SIGNING=y -CONFIG_NCPFS_IOCTL_LOCKING=y -CONFIG_NCPFS_STRONG=y -CONFIG_NCPFS_NFS_NS=y -CONFIG_NCPFS_OS2_NS=y -CONFIG_NCPFS_SMALLDOS=y -CONFIG_NCPFS_NLS=y -CONFIG_NCPFS_EXTRAS=y -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_IMON=m -CONFIG_EXECOUNT=y - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -CONFIG_VIDEO_SELECT=y -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -CONFIG_FB=y -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FB_LOGO_TUX is not set -# CONFIG_FB_LOGO_LARRY is not set -# CONFIG_FB_LOGO_GENTOO is not set -# CONFIG_FB_LOGO_G is not set -# CONFIG_FB_LOGO_PENGUIN is not set -CONFIG_FB_LOGO_POWEREDBY=y -# CONFIG_FB_RIVA is not set -# CONFIG_FB_CLGEN is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_VESA=y -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_HGA is not set -CONFIG_VIDEO_SELECT=y -# CONFIG_FB_MATROX is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_INTEL is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_FBCON_SPLASHSCREEN=y -CONFIG_FBCON_CFB16=y -# CONFIG_FBCON_ADVANCED is not set -CONFIG_FBCON_CFB8=y -CONFIG_FBCON_CFB16=y -CONFIG_FBCON_CFB24=y -CONFIG_FBCON_CFB32=y -# CONFIG_FBCON_FONTWIDTH8_ONLY is not set -# CONFIG_FBCON_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_SOUND_ALI5455=m -CONFIG_SOUND_BT878=m -CONFIG_SOUND_CMPCI=m -# CONFIG_SOUND_CMPCI_FM is not set -# CONFIG_SOUND_CMPCI_MIDI is not set -# CONFIG_SOUND_CMPCI_JOYSTICK is not set -# CONFIG_SOUND_CMPCI_CM8738 is not set -CONFIG_SOUND_EMU10K1=m -# CONFIG_MIDI_EMU10K1 is not set -CONFIG_SOUND_FUSION=m -CONFIG_SOUND_CS4281=m -CONFIG_SOUND_ES1370=m -CONFIG_SOUND_ES1371=m -CONFIG_SOUND_ESSSOLO1=m -CONFIG_SOUND_MAESTRO=m -CONFIG_SOUND_MAESTRO3=m -CONFIG_SOUND_FORTE=m -CONFIG_SOUND_ICH=m -CONFIG_SOUND_RME96XX=m -CONFIG_SOUND_SONICVIBES=m -CONFIG_SOUND_TRIDENT=m -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -CONFIG_SOUND_VIA82CXXX=m -# CONFIG_MIDI_VIA82CXXX is not set -CONFIG_SOUND_OSS=m -# CONFIG_SOUND_TRACEINIT is not set -# CONFIG_SOUND_DMAP is not set -CONFIG_SOUND_AD1816=m -CONFIG_SOUND_AD1889=m -CONFIG_SOUND_SGALAXY=m -CONFIG_SOUND_ADLIB=m -CONFIG_SOUND_ACI_MIXER=m -CONFIG_SOUND_CS4232=m -CONFIG_SOUND_SSCAPE=m -CONFIG_SOUND_GUS=m -# CONFIG_SOUND_GUS16 is not set -# CONFIG_SOUND_GUSMAX is not set -# CONFIG_SOUND_VMIDI is not set -CONFIG_SOUND_TRIX=m -CONFIG_SOUND_MSS=m -CONFIG_SOUND_MPU401=m -CONFIG_SOUND_NM256=m -CONFIG_SOUND_MAD16=m -CONFIG_MAD16_OLDCARD=y -CONFIG_SOUND_PAS=m -# CONFIG_PAS_JOYSTICK is not set -CONFIG_SOUND_PSS=m -# CONFIG_PSS_MIXER is not set -# CONFIG_PSS_HAVE_BOOT is not set -CONFIG_SOUND_SB=m -CONFIG_SOUND_AWE32_SYNTH=m -CONFIG_SOUND_KAHLUA=m -CONFIG_SOUND_WAVEFRONT=m -CONFIG_SOUND_MAUI=m -CONFIG_SOUND_YM3812=m -CONFIG_SOUND_OPL3SA1=m -CONFIG_SOUND_OPL3SA2=m -CONFIG_SOUND_YMFPCI=m -# CONFIG_SOUND_YMFPCI_LEGACY is not set -# CONFIG_SOUND_UART6850 is not set -CONFIG_SOUND_AEDSP16=m -# CONFIG_SC6600 is not set -# CONFIG_AEDSP16_SBPRO is not set -# CONFIG_AEDSP16_MSS is not set -# CONFIG_AEDSP16_MPU401 is not set -# CONFIG_SOUND_TVMIXER is not set - -# -# USB support -# -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=m -CONFIG_USB_UHCI_ALT=m -CONFIG_USB_OHCI=m -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_TIGL=m -CONFIG_USB_BRLVGER=m -CONFIG_USB_LCD=m - -# -# Bluetooth support -# -CONFIG_BLUEZ=m -CONFIG_BLUEZ_L2CAP=m -CONFIG_BLUEZ_SCO=m -# CONFIG_BLUEZ_RFCOMM is not set -CONFIG_BLUEZ_BNEP=m -# CONFIG_BLUEZ_BNEP_MC_FILTER is not set -# CONFIG_BLUEZ_BNEP_PROTO_FILTER is not set - -# -# Bluetooth device drivers -# -CONFIG_BLUEZ_HCIUSB=m -# CONFIG_BLUEZ_USB_SCO is not set -# CONFIG_BLUEZ_USB_ZERO_PACKET is not set -CONFIG_BLUEZ_HCIUART=m -CONFIG_BLUEZ_HCIUART_H4=y -CONFIG_BLUEZ_HCIUART_BCSP=y -CONFIG_BLUEZ_HCIUART_BCSP_TXCRC=y -# CONFIG_BLUEZ_HCIDTL1 is not set -# CONFIG_BLUEZ_HCIBT3C is not set -# CONFIG_BLUEZ_HCIBLUECARD is not set -# CONFIG_BLUEZ_HCIBTUART is not set -CONFIG_BLUEZ_HCIVHCI=m - -# -# Windows Applications support -# -# CONFIG_MKI is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/kde/gss-config b/src/livecd/profiles/kde/gss-config deleted file mode 100644 index f242fed0cd..0000000000 --- a/src/livecd/profiles/kde/gss-config +++ /dev/null @@ -1,1539 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODVERSIONS=y -CONFIG_KMOD=y - -# -# Processor type and features -# -# CONFIG_LOLAT is not set -# CONFIG_LOLAT_SYSCTL is not set -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -# CONFIG_MPPRO31 is not set -# CONFIG_M68631 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MK8 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_MVIAC3_2 is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -CONFIG_TOSHIBA=m -CONFIG_I8K=m -CONFIG_THINKPAD=m -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -CONFIG_PREEMPT=y -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -# CONFIG_PCMCIA is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_IBM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -# CONFIG_ACPI_HT_ONLY is not set -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -# CONFIG_EVMS_GPT_SEGMENT_MGR is not set -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -# CONFIG_EVMS_OS2 is not set -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -CONFIG_CRYPTO=m -CONFIG_CIPHERS=y -CONFIG_CIPHER_AES=m -CONFIG_CIPHER_MARS=m -CONFIG_CIPHER_RC6=m -CONFIG_CIPHER_SERPENT=m -CONFIG_CIPHER_TWOFISH=m -CONFIG_CIPHER_3DES=m -CONFIG_CIPHER_BLOWFISH=m -CONFIG_CIPHER_CAST5=m -CONFIG_CIPHER_GOST=m -CONFIG_CIPHER_IDEA=m -CONFIG_CIPHER_RC5=m -CONFIG_CIPHER_NULL=m -CONFIG_CIPHER_DES=m -CONFIG_CIPHER_DFC=m -CONFIG_CIPHER_BLOWFISH_OLD=m -CONFIG_DIGESTS=y -CONFIG_DIGEST_MD5=m -CONFIG_DIGEST_SHA1=m -CONFIG_DIGEST_RIPEMD160=m -CONFIG_DIGEST_SHA256=m -CONFIG_DIGEST_SHA384=m -CONFIG_DIGEST_SHA512=m -CONFIG_CRYPTODEV=y -CONFIG_CRYPTOLOOP=m -CONFIG_CRYPTOLOOP_ATOMIC=y -CONFIG_CRYPTOLOOP_IV_HACK=y -CONFIG_CRYPTOLOOP_DEBUG=y -CONFIG_IPSEC_TUNNEL=m - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -# CONFIG_IP_NF_COMPAT_IPCHAINS is not set -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -CONFIG_IPX=m -CONFIG_IPX_INTERN=y -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -CONFIG_DECNET=m -# CONFIG_DECNET_SIOCGIFCONF is not set -# CONFIG_DECNET_ROUTER is not set -CONFIG_BRIDGE=m -CONFIG_X25=m -CONFIG_LAPB=m -CONFIG_LLC=y -CONFIG_NET_DIVERT=y -CONFIG_ECONET=m -# CONFIG_ECONET_AUNUDP is not set -# CONFIG_ECONET_NATIVE is not set -CONFIG_WAN_ROUTER=m -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_IPSEC is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -CONFIG_BLK_DEV_ADMA100=y -CONFIG_BLK_DEV_AEC62XX=y -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_TRIFLEX=y -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX_OLD=y -# CONFIG_PDC202XX_BURST is not set -CONFIG_BLK_DEV_PDC202XX_NEW=y -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_SC1200=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIIMAGE=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_PDC202XX=y -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m -CONFIG_BLK_DEV_ATARAID_SII=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_BUILD_FIRMWARE is not set -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -# CONFIG_SCSI_SYM53C8XX is not set -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -CONFIG_SCSI_NSP32=m -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_MAX_SGE=40 -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -CONFIG_EQUALIZER=y -CONFIG_TUN=m -CONFIG_ETHERTAP=y -CONFIG_NET_SB1000=m - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_TYPHOON=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_AMD8111_ETH=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -# CONFIG_EEPRO100_PIO is not set -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_R8169=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -CONFIG_FDDI=y -CONFIG_DEFXX=m -CONFIG_SKFP=m -CONFIG_HIPPI=y -CONFIG_ROADRUNNER=m -# CONFIG_ROADRUNNER_LARGE_RINGS is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_STRIP is not set -# CONFIG_WAVELAN is not set -# CONFIG_ARLAN is not set -# CONFIG_AIRONET4500 is not set -# CONFIG_AIRONET4500_NONCS is not set -# CONFIG_AIRONET4500_PROC is not set -# CONFIG_AIRO is not set -# CONFIG_HERMES is not set -# CONFIG_PLX_HERMES is not set -# CONFIG_PCI_HERMES is not set -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_IRDA_DEBUG=y - -# -# Infrared-port device drivers -# -CONFIG_IRTTY_SIR=m -CONFIG_IRPORT_SIR=m -CONFIG_DONGLE=y -CONFIG_ESI_DONGLE=m -CONFIG_ACTISYS_DONGLE=m -CONFIG_TEKRAM_DONGLE=m -CONFIG_GIRBIL_DONGLE=m -CONFIG_LITELINK_DONGLE=m -CONFIG_MCP2120_DONGLE=m -CONFIG_OLD_BELKIN_DONGLE=m -CONFIG_ACT200L_DONGLE=m -CONFIG_MA600_DONGLE=m -CONFIG_USB_IRDA=m -CONFIG_NSC_FIR=m -CONFIG_WINBOND_FIR=m -# CONFIG_TOSHIBA_OLD is not set -CONFIG_TOSHIBA_FIR=m -CONFIG_SMC_IRCC_FIR=m -CONFIG_ALI_FIR=m -CONFIG_VLSI_FIR=m - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set -# CONFIG_ISDN_X25 is not set - -# -# ISDN feature submodules -# -CONFIG_ISDN_DRV_LOOP=m -CONFIG_ISDN_DIVERSION=m - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m -CONFIG_USB_AUERISDN=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=m - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_ECC is not set -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set - -# -# I2C support -# -CONFIG_I2C=m -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -CONFIG_I2C_MAINBOARD=y -CONFIG_I2C_ALI1535=m -CONFIG_I2C_ALI15X3=m -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_AMD756=m -CONFIG_I2C_AMD8111=m -# CONFIG_I2C_TSUNAMI is not set -CONFIG_I2C_I801=m -# CONFIG_I2C_I810 is not set -CONFIG_I2C_PIIX4=m -CONFIG_I2C_SIS5595=m -CONFIG_I2C_SIS630=m -CONFIG_I2C_SIS645=m -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_VIA is not set -CONFIG_I2C_VIAPRO=m -# CONFIG_I2C_VOODOO3 is not set -CONFIG_I2C_ISA=m -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_PROC=m - -# -# Hardware sensors support -# -CONFIG_SENSORS=y -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1024=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM9240=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_FSCPOS=m -CONFIG_SENSORS_FSCSCY=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_MAXILIFE=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_MTP008=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_SIS5595=m -CONFIG_SENSORS_SMSC47M1=m -CONFIG_SENSORS_THMC50=m -CONFIG_SENSORS_VIA686A=m -CONFIG_SENSORS_VT1211=m -CONFIG_SENSORS_VT8231=m -CONFIG_SENSORS_W83781D=m -# CONFIG_SENSORS_OTHER is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_IPMI_PANIC_EVENT is not set -# CONFIG_IPMI_DEVICE_INTERFACE is not set -# CONFIG_IPMI_KCS is not set -# CONFIG_IPMI_WATCHDOG is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_SCx200_GPIO is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -CONFIG_AGP_INTEL=y -CONFIG_AGP_I810=y -CONFIG_AGP_VIA=y -CONFIG_AGP_AMD=y -CONFIG_AGP_AMD_8151=y -CONFIG_AGP_SIS=y -CONFIG_AGP_ALI=y -CONFIG_AGP_SWORKS=y -CONFIG_AGP_NV=y -# CONFIG_DRM is not set -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -# CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -CONFIG_VXFS_FS=m -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -CONFIG_XFS_QUOTA=y -CONFIG_XFS_DMAPI=y -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -CONFIG_CODA_FS=m -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_ROOT_NFS is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -CONFIG_NCP_FS=m -CONFIG_NCPFS_PACKET_SIGNING=y -CONFIG_NCPFS_IOCTL_LOCKING=y -CONFIG_NCPFS_STRONG=y -CONFIG_NCPFS_NFS_NS=y -CONFIG_NCPFS_OS2_NS=y -CONFIG_NCPFS_SMALLDOS=y -CONFIG_NCPFS_NLS=y -CONFIG_NCPFS_EXTRAS=y -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_IMON=m -CONFIG_EXECOUNT=y - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -CONFIG_VIDEO_SELECT=y -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -CONFIG_FB=y -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FB_LOGO_TUX is not set -# CONFIG_FB_LOGO_LARRY is not set -# CONFIG_FB_LOGO_GENTOO is not set -# CONFIG_FB_LOGO_G is not set -# CONFIG_FB_LOGO_PENGUIN is not set -CONFIG_FB_LOGO_POWEREDBY=y -# CONFIG_FB_RIVA is not set -# CONFIG_FB_CLGEN is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_VESA=y -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_HGA is not set -CONFIG_VIDEO_SELECT=y -# CONFIG_FB_MATROX is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_INTEL is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_FBCON_SPLASHSCREEN=y -CONFIG_FBCON_CFB16=y -# CONFIG_FBCON_ADVANCED is not set -CONFIG_FBCON_CFB8=y -CONFIG_FBCON_CFB16=y -CONFIG_FBCON_CFB24=y -CONFIG_FBCON_CFB32=y -# CONFIG_FBCON_FONTWIDTH8_ONLY is not set -# CONFIG_FBCON_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_SOUND_ALI5455=m -CONFIG_SOUND_BT878=m -CONFIG_SOUND_CMPCI=m -# CONFIG_SOUND_CMPCI_FM is not set -# CONFIG_SOUND_CMPCI_MIDI is not set -# CONFIG_SOUND_CMPCI_JOYSTICK is not set -# CONFIG_SOUND_CMPCI_CM8738 is not set -CONFIG_SOUND_EMU10K1=m -# CONFIG_MIDI_EMU10K1 is not set -CONFIG_SOUND_FUSION=m -CONFIG_SOUND_CS4281=m -CONFIG_SOUND_ES1370=m -CONFIG_SOUND_ES1371=m -CONFIG_SOUND_ESSSOLO1=m -CONFIG_SOUND_MAESTRO=m -CONFIG_SOUND_MAESTRO3=m -CONFIG_SOUND_FORTE=m -CONFIG_SOUND_ICH=m -CONFIG_SOUND_RME96XX=m -CONFIG_SOUND_SONICVIBES=m -CONFIG_SOUND_TRIDENT=m -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -CONFIG_SOUND_VIA82CXXX=m -# CONFIG_MIDI_VIA82CXXX is not set -CONFIG_SOUND_OSS=m -# CONFIG_SOUND_TRACEINIT is not set -# CONFIG_SOUND_DMAP is not set -CONFIG_SOUND_AD1816=m -CONFIG_SOUND_AD1889=m -CONFIG_SOUND_SGALAXY=m -CONFIG_SOUND_ADLIB=m -CONFIG_SOUND_ACI_MIXER=m -CONFIG_SOUND_CS4232=m -CONFIG_SOUND_SSCAPE=m -CONFIG_SOUND_GUS=m -# CONFIG_SOUND_GUS16 is not set -# CONFIG_SOUND_GUSMAX is not set -# CONFIG_SOUND_VMIDI is not set -CONFIG_SOUND_TRIX=m -CONFIG_SOUND_MSS=m -CONFIG_SOUND_MPU401=m -CONFIG_SOUND_NM256=m -CONFIG_SOUND_MAD16=m -CONFIG_MAD16_OLDCARD=y -CONFIG_SOUND_PAS=m -# CONFIG_PAS_JOYSTICK is not set -CONFIG_SOUND_PSS=m -# CONFIG_PSS_MIXER is not set -# CONFIG_PSS_HAVE_BOOT is not set -CONFIG_SOUND_SB=m -CONFIG_SOUND_AWE32_SYNTH=m -CONFIG_SOUND_KAHLUA=m -CONFIG_SOUND_WAVEFRONT=m -CONFIG_SOUND_MAUI=m -CONFIG_SOUND_YM3812=m -CONFIG_SOUND_OPL3SA1=m -CONFIG_SOUND_OPL3SA2=m -CONFIG_SOUND_YMFPCI=m -# CONFIG_SOUND_YMFPCI_LEGACY is not set -# CONFIG_SOUND_UART6850 is not set -CONFIG_SOUND_AEDSP16=m -# CONFIG_SC6600 is not set -# CONFIG_AEDSP16_SBPRO is not set -# CONFIG_AEDSP16_MSS is not set -# CONFIG_AEDSP16_MPU401 is not set -# CONFIG_SOUND_TVMIXER is not set - -# -# USB support -# -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=m -CONFIG_USB_UHCI_ALT=m -CONFIG_USB_OHCI=m -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_TIGL=m -CONFIG_USB_BRLVGER=m -CONFIG_USB_LCD=m - -# -# Bluetooth support -# -CONFIG_BLUEZ=m -CONFIG_BLUEZ_L2CAP=m -CONFIG_BLUEZ_SCO=m -# CONFIG_BLUEZ_RFCOMM is not set -CONFIG_BLUEZ_BNEP=m -# CONFIG_BLUEZ_BNEP_MC_FILTER is not set -# CONFIG_BLUEZ_BNEP_PROTO_FILTER is not set - -# -# Bluetooth device drivers -# -CONFIG_BLUEZ_HCIUSB=m -# CONFIG_BLUEZ_USB_SCO is not set -# CONFIG_BLUEZ_USB_ZERO_PACKET is not set -CONFIG_BLUEZ_HCIUART=m -CONFIG_BLUEZ_HCIUART_H4=y -CONFIG_BLUEZ_HCIUART_BCSP=y -CONFIG_BLUEZ_HCIUART_BCSP_TXCRC=y -# CONFIG_BLUEZ_HCIDTL1 is not set -# CONFIG_BLUEZ_HCIBT3C is not set -# CONFIG_BLUEZ_HCIBLUECARD is not set -# CONFIG_BLUEZ_HCIBTUART is not set -CONFIG_BLUEZ_HCIVHCI=m - -# -# Windows Applications support -# -# CONFIG_MKI is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/kde/help.msg b/src/livecd/profiles/kde/help.msg deleted file mode 100644 index 2271b688dd..0000000000 --- a/src/livecd/profiles/kde/help.msg +++ /dev/null @@ -1,25 +0,0 @@ -Gentoo Linux 1.4 LiveCD boot options - [F1 to redisplay boot graphic] - -At the prompt type "gentoo option" -available at prompt "gentoo,acpi,memtest" -or just hit enter if no options are needed. -Type "acpi option" at a prompt to enable acpi on the default gentoo kernel - -agpgart loads agpgart (use if you have graphic problems,lockups) -doscsi scan for scsi devices (breaks some ethernet cards) -nodetect causes hwsetup/kudzu and hotplug not to run -dofirewire modprobes firewire modules in initrd (for firewire cdroms,etc) -nousb disables usb module load from initrd, disables hotplug -nodhcp dhcp does not automatically start if nic detected -doataraid loads ide raid modules from initrd -dopcmcia starts pcmcia service -noapm disables apm module load -noraid disables loading of evms modules -nohotplug disables loading hotplug service -ide=nodma Force disabling of dma for malfunctioning ide devices -cdcache Cache the entire runtime portion of cd in ram, This - uses 40mb of RAM , but allows you to umount /mnt/cdrom - and mount another cdrom. -noraid disables autoloading of evms modules -dokeymap enable keymap selection for non-us keyboard layouts -noapic disable apic (try if having hardware problems ,nics,scsi,etc) diff --git a/src/livecd/profiles/kde/isolinux.cfg b/src/livecd/profiles/kde/isolinux.cfg deleted file mode 100644 index cc8bd5849f..0000000000 --- a/src/livecd/profiles/kde/isolinux.cfg +++ /dev/null @@ -1,32 +0,0 @@ -default gentoo - -timeout 150 -prompt 1 -display boot.msg -#display boot1.msg -F1 boot.msg -F2 help.msg - -label gentoo - kernel gentoo - append splash=silent noX vga=791 initrd=initrd.1024 acpi=off root=/dev/ram0 init=/linuxrc nomce - -label acpi - kernel gentoo - append splash=silent vga=791 initrd=initrd acpi=on root=/dev/ram0 init=/linuxrc nomce - -label nofb - kernel gentoo - append vga=normal initrd=initrd acpi=off root=/dev/ram0 init=/linuxrc nomce - -label memtest - kernel memtest - -label smp - kernel smp - append initrd=initrd2 acpi=off root=/dev/ram0 init=/linuxrc nomce - -label smp-acpi - kernel smp - append initrd=initrd2 acpi=on root=/dev/ram0 init=/linuxrc nomce - diff --git a/src/livecd/profiles/kde/kernel-config b/src/livecd/profiles/kde/kernel-config deleted file mode 100644 index 466f2a02c3..0000000000 --- a/src/livecd/profiles/kde/kernel-config +++ /dev/null @@ -1,1294 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -# CONFIG_LOLAT is not set -# CONFIG_LOLAT_SYSCTL is not set -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M686 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -# CONFIG_MK7 is not set -# CONFIG_MK8 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_THINKPAD is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_1GB is not set -CONFIG_2GB=y -# CONFIG_3GB is not set -# CONFIG_05GB is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -CONFIG_CARDBUS=y -CONFIG_TCIC=y -CONFIG_I82092=y -CONFIG_I82365=y - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -CONFIG_EVMS_GPT_SEGMENT_MGR=m -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -# CONFIG_EVMS_OS2 is not set -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -# CONFIG_CRYPTO is not set -# CONFIG_CIPHERS is not set -# CONFIG_DIGESTS is not set -# CONFIG_CRYPTODEV is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_IPSEC is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -CONFIG_IDE_TASK_IOCTL=y -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_BLK_DEV_GENERIC is not set -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_TRIFLEX=y -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_BLK_DEV_NFORCE=y -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX_OLD=y -# CONFIG_PDC202XX_BURST is not set -CONFIG_BLK_DEV_PDC202XX_NEW=y -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_SC1200=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIIMAGE=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_PDC202XX=y -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m -CONFIG_BLK_DEV_ATARAID_SII=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_BUILD_FIRMWARE is not set -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -CONFIG_SCSI_SYM53C8XX=m -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -CONFIG_SCSI_PCMCIA=y -CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_FDOMAIN=m -CONFIG_PCMCIA_NINJA_SCSI=m -CONFIG_PCMCIA_QLOGIC=m - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_MAX_SGE=40 -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_TYPHOON=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_AMD8111_ETH=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -# CONFIG_EEPRO100_PIO is not set -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_R8169=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -CONFIG_PCMCIA_IBMTR=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_AIRONET4500_CS=m - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m -CONFIG_USB_AUERISDN=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_ECC is not set -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_IPMI_PANIC_EVENT is not set -# CONFIG_IPMI_DEVICE_INTERFACE is not set -# CONFIG_IPMI_KCS is not set -# CONFIG_IPMI_WATCHDOG is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_SCx200_GPIO is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set - -# -# PCMCIA character devices -# -CONFIG_PCMCIA_SERIAL_CS=m -CONFIG_SYNCLINK_CS=m -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_PROC_CONFIG=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -# CONFIG_IMON is not set - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=y -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=y -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -# CONFIG_USB_LCD is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Windows Applications support -# -# CONFIG_MKI is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/kde/keymaps/bin-keymaps.tar.gz b/src/livecd/profiles/kde/keymaps/bin-keymaps.tar.gz Binary files differdeleted file mode 100644 index 8895ca4689..0000000000 --- a/src/livecd/profiles/kde/keymaps/bin-keymaps.tar.gz +++ /dev/null diff --git a/src/livecd/profiles/kde/keymaps/key.lst b/src/livecd/profiles/kde/keymaps/key.lst deleted file mode 100644 index 7396871474..0000000000 --- a/src/livecd/profiles/kde/keymaps/key.lst +++ /dev/null @@ -1,10 +0,0 @@ -Please select a keymap from the following list by typing in the appropriate -name or number. Hit Enter for the default "us/41" US English keymap. - - 1 azerty 7 cf 13 es 19 il 25 mk 31 ru 37 trf - 2 be 8 croat 14 et 20 is 26 nl 32 se 38 trq - 3 bg 9 cz 15 fi 21 it 27 no 33 sg 39 ua - 4 br-a 10 de 16 fr 22 jp 28 pl 34 sk-y 40 uk - 5 br-l 11 dk 17 gr 23 la 29 pt 35 sk-z 41 us - 6 by 12 dvorak 18 hu 24 lt 30 ro 36 slovene 42 wangbe - diff --git a/src/livecd/profiles/kde/linuxrc b/src/livecd/profiles/kde/linuxrc deleted file mode 100644 index 77449bfb26..0000000000 --- a/src/livecd/profiles/kde/linuxrc +++ /dev/null @@ -1,278 +0,0 @@ -#!/bin/sh -# -# Script to boot up a system with autodetection of CD location -# -# Daniel Robbins <drobbins@gentoo.org> -# Copyright 2002 Gentoo Technologies, Inc. -# Distributed under the GPL - -PATH=/usr/sbin:/usr/bin:/sbin:/bin -BACK_UP="\033[1K\033[0G" -HILITE="\033[1m" -NORMAL="\033[0m" -WARN="\033[1m" -BAD="\033[1m" -mount -oremount,rw / -mount /proc -# Disable kernel messages to console: -echo "0" > /proc/sys/kernel/printk -SCSI="no" -CDCACHE="no" -IDEBUG="no" -FIREWIRE="no" -ATARAID="no" -PCMCIA="no" -DETECT="no" -USB="yes" -KEYMAP="no" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "doscsi" ] - then - SCSI="yes" - elif [ "$x" = "cdcache" ] - then - CDCACHE="yes" - elif [ "$x" = "idebug" ] - then - IDEBUG="yes" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "dofirewire" ] - then - FIREWIRE="yes" - fi -done -for x in $CMDLINE -do - if [ "$x" = "nousb" ] - then - USB="no" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "doataraid" ] - then - ATARAID="yes" - fi -done -for x in $CMDLINE -do - if [ "$x" = "dopcmcia" ] - then - PCMCIA="yes" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "dokeymap" ] - then - KEYMAP="yes" - fi -done - -blurb() { - echo -ne ${HILITE}${1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} - -# Create the new root FS -mkdir newroot -mount -t tmpfs tmpfs /newroot -cd /newroot -mkdir dev mnt mnt/cdrom mnt/cloop mnt/.init.d mnt/gentoo - -if [ ! -e /newroot/dev/.devfsd ] -then - #mount devfs - mount -t devfs devfs /newroot/dev -fi - -mounted="" - -initmsg() { - echo -e "${HILITE}${*}${NORMAL}" -} - -nocd() { - echo -e "${HILITE}---- CD not found${NORMAL}" - umount /newroot - ash - umount /proc - exec /linuxrc -} - -getkeymap() { - local mykeymap - echo -ne ${HILITE} - cat /keymaps/key.lst - echo -ne ${NORMAL} - read -p "Keymap selection: " mykeymap - if [ -e /keymaps/${mykeymap}.map ] - then - echo -e "${HILITE}---- Loading ${mykeymap} keymap${NORMAL}" - loadkmap < /keymaps/${mykeymap}.map - elif [ "$mykeymap" = "" ] - then - #default keymap is "us" - echo -e "${HILITE}---- Loading default (US) keymap${NORMAL}" - loadkmap < /keymaps/us.map - else - getkeymap - fi -} - -modules_scan() { - local type - type=${1}; shift - for x in "$@" - do - if [ ! -e /modules/${type}/${x}.o ] - then - echo -e "${HILITE}---- Module ${x}.o not found; skipping...${NORMAL}" - continue - fi - blurb "---- Scanning for ${x}..." - insmod -f /modules/${type}/${x}.o > /dev/null 2>&1 - if [ $? -eq 0 ] - then - backup - echo -e "${GOOD}---- Detected ${x} hardware${NORMAL}" - else - backup - echo -ne "${NORMAL}" - fi - done -} - -findmount() { - if [ "$*" = "" ] - then - nocd - fi - while ! mount -t iso9660 -r $1 /newroot/mnt/cdrom; do - shift - if [ "$1" = "" ]; then - nocd - fi - done - if [ ! -e /newroot/mnt/cdrom/livecd.cloop -a ! -e /newroot/mnt/cdrom/livecd.loop ]; then - echo -e "${HILITE}---- $1 is not a LiveCD; skipping...${NORMAL}" - umount /newroot/mnt/cdrom - shift - findmount $* - fi - mounted=$1 - #echo -e "${HILITE}---- CD medium found on $1${NORMAL}" -} - -# Mount the CD -if [ "$SCSI" = "yes" ] -then -DEVICE=SCSI - echo -e "${HILITE}---- Beginning storage detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan storage ##STORAGE_MODULES## -fi - -if [ "$FIREWIRE" = "yes" ] -then -DEVICE=FIREWIRE - echo -e "${HILITE}---- Beginning firewire detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan firewire ##FIREWIRE_MODULES## -fi -if [ "$ATARAID" = "yes" ] -then -DEVICE=ATARAID - echo -e "${HILITE}---- Beginning ata detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan ataraid ##ATARAID_MODULES## -fi - -if [ "$PCMCIA" = "yes" ] -then -DEVICE=PCMCIA - echo -e "${HILITE}---- Beginning pcmcia detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan pcmcia ##PCMCIA_MODULES## -fi -if [ "$USB" = "yes" ] -then -DEVICE=USB - echo -e "${HILITE}---- Beginning usb detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan usb ##USB_MODULES## -fi - -if [ "$KEYMAP" = "yes" ] -then -getkeymap -fi - -#initmsg "---- Mounting the CD" -findmount /newroot/dev/cdroms/* -if [ "$IDEBUG" = "yes" ] -then - exec /bin/sh -fi -if [ -e /newroot/mnt/cdrom/livecd.cloop ] -then - #compressed loopback - mknod /dev/cloop b 240 0 - if [ "$CDCACHE" = "yes" ] - then - #initmsg "---- Attempting to cache CD image to tmpfs" - cp /newroot/mnt/cdrom/livecd.cloop /newroot/mnt/ - if [ $? -ne 0 ] - then - #initmsg "---- Caching failed (likely due to lack of space" - CDCACHE="no" - rm -f /newroot/mnt/livecd.cloop - else - insmod /modules/cloop.o file=/newroot/mnt/livecd.cloop >/dev/null 2>&1 - mount -o ro -t ext2 /dev/cloop /newroot/mnt/cloop - fi - fi - if [ "$CDCACHE" = "no" ] - then - #initmsg "---- Mounting compressed loopback filesystem" - insmod /modules/cloop.o file=/newroot/mnt/cdrom/livecd.cloop >/dev/null 2>&1 - mount -o ro -t ext2 /dev/cloop /newroot/mnt/cloop - fi -else - mknod /dev/loop0 b 7 0 - #initmsg "---- Mounting loopback filesystem" - losetup /dev/loop0 /newroot/mnt/cdrom/livecd.loop - mount -o ro -t ext2 /dev/loop0 /newroot/mnt/cloop -fi -# Now the CD is mounted on /newroot/cdrom -#initmsg "---- Copying and symlinking files from CD to populate /" - -cd /newroot/ -for x in bin sbin lib boot usr opt install.txt -do - ln -s mnt/cloop/${x} ${x} -done -mkdir initrd proc tmp -chmod 1777 tmp -(cd /newroot/mnt/cloop; cp -a etc root home var /newroot) -#store name of mounted CD so we can add it to mtab.... (/etc/init.d/local will take it -#from here... -echo $mounted > tmp/mycd - -#initmsg "---- Switching to tmpfs root filesystem" -echo "6" > /proc/sys/kernel/printk -umount /proc -pivot_root . initrd -exec chroot . /sbin/init </dev/console >/dev/console 2>&1 diff --git a/src/livecd/profiles/kde/net-setup b/src/livecd/profiles/kde/net-setup deleted file mode 100644 index b74ed027be..0000000000 --- a/src/livecd/profiles/kde/net-setup +++ /dev/null @@ -1,32 +0,0 @@ -#!/bin/bash -[ "$1" = "" ] && echo "net-setup: please specify a network interface" && exit 1 -[ ! -d /tmp/setup.opts ] && mkdir /tmp/setup.opts -cd /tmp/setup.opts -dialog --title "Network Setup" --menu "Time to set up the $1 interface! You can use DHCP to automatically configure a network interface or you can specify an IP and related settings manually. Choose one option:" 20 60 7 0 "Use DHCP to auto-detect my network settings" 1 "Specify an IP address manually" 2> ${1}.1 -mynetsel=`cat ${1}.1` -case $mynetsel in -0) - /sbin/dhcpcd -t 10 ${1} - ;; -1) - dialog --title "IP address" --inputbox "Please enter an IP address for $1:" 20 50 "192.168.1.1" 2> ${1}.IP - dialog --title "Broadcast address" --inputbox "Please enter a Broadcast address for $1:" 20 50 "192.168.1.255" 2> ${1}.B - dialog --title "Network mask" --inputbox "Please enter a Network Mask for $1:" 20 50 "255.255.255.0" 2> ${1}.NM - dialog --title "Gateway" --inputbox "Please enter a Gateway for $1 (hit enter for none:)" 20 50 2> ${1}.GW - dialog --title "DNS server" --inputbox "Please enter a name server to use (hit enter for none:)" 20 50 2> ${1}.NS - /sbin/ifconfig $1 `cat ${1}.IP` broadcast `cat ${1}.B` netmask `cat ${1}.NM` - myroute=`cat ${1}.GW` - if [ "$myroute" != "" ] - then - /sbin/route add default gw $myroute dev $1 netmask 0.0.0.0 metric 1 - fi - myns="`cat ${1}.NS`" - if [ "$myns" = "" ] - then - : > /etc/resolv.conf - else - echo "nameserver $myns" > /etc/resolv.conf - fi - ;; -esac -echo "Type \"ifconfig\" to make sure the interface was configured correctly." diff --git a/src/livecd/profiles/kde/opengl-update b/src/livecd/profiles/kde/opengl-update deleted file mode 100644 index 1de19d8fec..0000000000 --- a/src/livecd/profiles/kde/opengl-update +++ /dev/null @@ -1,95 +0,0 @@ -#!/bin/bash -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# Author: Martin Schlemmer <azarah@gentoo.org> -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/kde/Attic/opengl-update,v 1.1 2003/10/19 03:10:53 livewire Exp $ - - -source /etc/init.d/functions.sh - -if [ `id -u` -ne 0 ] -then - eerror "${0}: must be root." - exit 1 -fi - -usage() { -cat << FOO -usage: opengl-update <GL implementation> - -note: - This utility switch between OpenGL implementations. Currently there - are two supported implementations, namely "xfree" and "nvidia", the - implementations for XFree86 and the NVidia drivers respectively. - -examples: - opengl-update xfree - This will setup things to use libGL.so from XFree86 - - opengl-update nvidia - This will setup things to use libGL.so from the NVidia drivers. - -FOO - exit 1 -} - -if [ "$#" -ne 1 ] -then - usage -fi -if [ ! -d /usr/lib/opengl/${1} ] -then - usage -else - ebegin "Switching to ${1} OpenGL interface" - - #set up the $LDPATH - echo "LDPATH=/usr/lib/opengl/${1}/lib" >/etc/env.d/09opengl - /usr/sbin/env-update &>/dev/null - - #setup the /usr/lib/libGL.so symlink - rm -f /etc/opengl/libGL.so /etc/opengl/libGL.so.1 - - realname="$(readlink /usr/lib/opengl/${1}/lib/libGL.so)" - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libGL.so - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libGL.so.1 - - #setup the /usr/X11R6/lib/libMesaGL.so symlink - rm -f /etc/opengl/libMesaGL.so - realname="$(readlink /usr/lib/opengl/${1}/lib/libGL.so)" - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libMesaGL.so - - rm -f /etc/opengl/libGLcore.so* - - if [ -e /usr/lib/opengl/${1}/lib/libGLcore.so ] - then - realname="$(readlink /usr/lib/opengl/${1}/lib/libGLcore.so)" - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libGLcore.so - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libGLcore.so.1 - fi - - #setup the /usr/X11R6/lib/modules/extensions/libglx.so symlink - rm -f /etc/opengl/libglx.* - - if [ -e /usr/lib/opengl/${1}/extensions/libglx.so ] - then - ln -sf /usr/lib/opengl/${1}/extensions/libglx.so \ - /etc/opengl/libglx.so - fi - #setup the /usr/X11R6/lib/modules/extensions/libglx.a symlink - if [ -e /usr/lib/opengl/${1}/extensions/libglx.a ] - then - ln -sf /usr/lib/opengl/${1}/extensions/libglx.a \ - /etc/opengl/libglx.a - fi - - eend 0 -fi - - -# vim:ts=4 diff --git a/src/livecd/profiles/kde/openglify b/src/livecd/profiles/kde/openglify deleted file mode 100644 index 5b31383f42..0000000000 --- a/src/livecd/profiles/kde/openglify +++ /dev/null @@ -1,29 +0,0 @@ -#!/bin/bash -#This script is designed to tweak the system for CD-based opengl-update -#set up our flexible opengl stuff: - -#if [ ! -e ${CD_BUILDCHROOT}/etc/opengl ] -#then - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/opengl-update ${CD_BUILDCHROOT}/usr/sbin - #move symlinks to a malleable /etc/opengl directory. - install -d ${CD_BUILDCHROOT}/etc/opengl - mv ${CD_BUILDCHROOT}/usr/lib/libGL.* ${CDROOT}/etc/opengl/ - mv ${CD_BUILDCHROOT}/usr/lib/libGLcore.* ${CDROOT}/etc/opengl/ - ln -sf /etc/opengl/libGL.so ${CD_BUILDCHROOT}/usr/lib/libGL.so - ln -sf /etc/opengl/libGL.so.1 ${CD_BUILDCHROOT}/usr/lib/libGL.so.1 - ln -sf /etc/opengl/libGLcore.so ${CD_BUILDCHROOT}/usr/lib/libGLcore.so - ln -sf /etc/opengl/libGLcore.so.1 ${CD_BUILDCHROOT}/usr/lib/libGLcore.so.1 - mv ${CD_BUILDCHROOT}/usr/X11R6/lib/libMesaGL.so ${CDROOT}/etc/opengl/ - ln -sf /etc/opengl/libMesaGL.so ${CD_BUILDCHROOT}/usr/X11R6/lib/libMesaGL.so - for x in libglx.a libglx.so - do - if [ -e ${CD_BUILDCHROOT}/usr/X11R6/lib/modules/extensions/${x} -o -L \ - ${CD_BUILDCHROOT}/usr/X11R6/lib/modules/extensions/${x} ] - then - mv ${CD_BUILDCHROOT}/usr/X11R6/lib/modules/extensions/${x} ${CDROOT}/etc/opengl/ - fi - ln -s /etc/opengl/${x} \ - ${CD_BUILDCHROOT}/usr/X11R6/lib/modules/extensions/${x} - done -#fi - diff --git a/src/livecd/profiles/kde/post-clean b/src/livecd/profiles/kde/post-clean deleted file mode 100644 index 04109ce040..0000000000 --- a/src/livecd/profiles/kde/post-clean +++ /dev/null @@ -1,5 +0,0 @@ -#!/bin/bash -install -m0755 ${LIVECD_ROOT}/profiles/${CD_PROFILE}/x-setup ${CD_BUILDCHROOT}/usr/sbin/x-setup -install -m0755 ${LIVECD_ROOT}/profiles/${CD_PROFILE}/xinitrc ${CD_BUILDCHROOT}/root/.xinitrc -install -m0644 ${LIVECD_ROOT}/profiles/${CD_PROFILE}/XF86Config.* ${CD_BUILDCHROOT}/etc/X11/ -tar -jxvf ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/root.tar.bz2 -C ${CD_BUILDCHROOT}/ || die diff --git a/src/livecd/profiles/kde/pre-clean b/src/livecd/profiles/kde/pre-clean deleted file mode 100644 index 9178c24be7..0000000000 --- a/src/livecd/profiles/kde/pre-clean +++ /dev/null @@ -1,96 +0,0 @@ -#!/bin/bash -echo "$CD_HOSTNAME" > ${CD_BUILDCHROOT}/etc/hostname || die -#modprobe has a bug and auto-adds a "above hid keybdev mousedev" line to it's internel configuration. -#this fixes it.... -echo "above hid" > ${CD_BUILDCHROOT}/etc/modules.d/hidfix -#rm ${CD_BUILDCHROOT}/etc/init.d/iptables -install -d ${CD_BUILDCHROOT}/var/state/init.d || die -cp ${CD_BUILDCHROOT}/etc/init.d/net.eth0 ${CD_BUILDCHROOT}/etc/init.d/net.eth1 -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/bash_profile ${CD_BUILDCHROOT}/root/.bash_profile || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/modules ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/checkroot ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/md ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/hotplug ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/aumix ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/checkfs ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/mingetty ${CD_BUILDCHROOT}/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/autoconfig ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/usleep ${CD_BUILDCHROOT}/sbin || die -#cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/depscan.sh ${CD_BUILDCHROOT}/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/login.defs ${CD_BUILDCHROOT}/etc || die -#cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/functions.sh ${CD_BUILDCHROOT}/sbin || die -cat ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/splash.sh >> ${CD_BUILDCHROOT}/sbin/functions.sh || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/bootsplash-1024x768.cfg ${CD_BUILDCHROOT}/etc/bootsplash/gentoo/config || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/local ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fstab ${CD_BUILDCHROOT}/etc || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/net-setup ${CD_BUILDCHROOT}/usr/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/profile ${CD_BUILDCHROOT}/etc || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/net ${CD_BUILDCHROOT}/etc/conf.d || die -mv ${CD_BUILDCHROOT}/sbin/splash ${CD_BUILDCHROOT}/sbin/splash.bin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/splash ${CD_BUILDCHROOT}/sbin/ || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/rc ${CD_BUILDCHROOT}/sbin/ || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fbtruetype.static ${CD_BUILDCHROOT}/sbin/ || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fbtruetype.static ${CD_BUILDCHROOT}/sbin/fbtruetype || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fbresolution ${CD_BUILDCHROOT}/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/splash.bin ${CD_BUILDCHROOT}/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/gentoo_default_blue.jpg ${CD_BUILDCHROOT}/usr/kde/3.1/share/wallpapers || die -mv ${CD_BUILDCHROOT}/usr/kde/3.1/share/config ${CD_BUILDCHROOT}/etc || die -ln -s /etc/config ${CD_BUILDCHROOT}/usr/kde/3.1/share/config || die -rm -f ${CD_BUILDCHROOT}/usr/share/hwdata/pci.ids -rm -f ${CD_BUILDCHROOT}/usr/share/hwdata/usb.ids -ln -s /usr/share/misc/pci.ids ${CD_BUILDCHROOT}/usr/share/hwdata/pci.ids -ln -s /usr/share/misc/usb.ids ${CD_BUILDCHROOT}/usr/share/hwdata/usb.ids -install -d ${CD_BUILDCHROOT}/usr/share/fonts || die -ln -s /usr/X11R6/lib/X11/fonts/{TTF,100dpi,75dpi,PEX,Speedo,Type1,truetype,encodings} ${CD_BUILDCHROOT}/usr/share/fonts || die -rm -f ${CD_BUILDCHROOT}/lib/evms/libe2fsim.1.2.1.so -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/install.txt ${CD_BUILDCHROOT}/ || die -echo usbcore >> ${CD_BUILDCHROOT}/etc/hotplug/blacklist -chmod +x ${CD_BUILDCHROOT}/usr/sbin/net-setup || die -mymotd=${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/motd -[ -e $mymotd ] && cp $mymotd ${CD_BUILDCHROOT}/etc -echo "CDBOOT=1" >> ${CD_BUILDCHROOT}/etc/rc.conf || die -echo "svcdir=/var/state/init.d" >> ${CD_BUILDCHROOT}/etc/conf.d/rc || die -echo "127.0.0.1 cdimage localhost" > ${CD_BUILDCHROOT}/etc/hosts || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/inittab ${CD_BUILDCHROOT}/etc || die -mount_all -cat > $CD_BUILDTEMP/chroot-clean << EOF -#!/bin/bash -source /etc/profile -#do our hid fix... -modules-update -cd /usr/src/linux -#produce correct module dependency information -make _modinst_post -rc-update del iptables default -rc-update del netmount default -rc-update add autoconfig default -#rc-update add md default -#remove standard keymap support: -rc-update del keymaps -rc-update del consolefont -rc-update add metalog default -rc-update add distccd default -#rc-update add aumix default -adduser distcc -fc-cache --force -modules-update -#OK, we can't run env-update on the CD itself (likely no python) -#so we will tweak opengl stuff here... -rm /etc/env.d/09opengl -env-update -cp /etc/ld.so.conf /etc/ld.so.conf.orig -rm /usr/sbin/env-update -EOF -chmod +x $CD_BUILDTEMP/chroot-clean -chroot $CD_BUILDCHROOT /tmp/livecd/chroot-clean -[ $? -ne 0 ] && chroot_die "chroot-clean failure" -umount_all -rm -rf ${CD_BUILDCHROOT}/etc/localtime -cp ${CD_BUILDCHROOT}/usr/share/zoneinfo/GMT ${CD_BUILDCHROOT}/etc/localtime || die - -if [ -e "${LIVECD_ROOT}/profiles/${CD_PROFILE}/openglify" ] -then - source ${LIVECD_ROOT}/profiles/${CD_PROFILE}/openglify -fi -find ${CD_BUILDCHROOT}/lib/modules -name modules.dep |xargs touch - diff --git a/src/livecd/profiles/kde/settings b/src/livecd/profiles/kde/settings deleted file mode 100644 index aa175dbdba..0000000000 --- a/src/livecd/profiles/kde/settings +++ /dev/null @@ -1,41 +0,0 @@ -source ${LIVECD_ROOT}/profiles/global/settings -LOOP_MODE=cloop -CD_BUILDROOT=${CD_TEMPROOT}/${CD_PROFILE} -CD_PORTAGE_PROFILE="default-x86-1.4" -CD_USE="-cdr -wavelan pcmcia -gnome -dvd -gpm -lirc crypt ipv6 -doc -slang X -svga -directfb \ --ggi -esd -nas -ggi socks5 usb \ --python -truetype -prebuilt -cups gtk2 xv" -CD_CFLAGS="-O2 -mcpu=i686 -pipe" -#CD_CFLAGS="-march=pentium3 -mno-sse -Os -pipe -finline-functions -fdelete-null-pointer-checks \ -#-fprefetch-loop-arrays -foptimize-sibling-calls -funroll-loops -frerun-loop-opt \ -#-frename-registers -fmove-all-movables -freorder-blocks" -CD_CXXFLAGS="${CD_CFLAGS}" -#CD_STAGETARBALL=ftp://ftp.twobit.net/pub/stage3-pentium3-1.4_pre20030308.tar.bz2 -CD_STAGETARBALL=http://distro.ibiblio.org/pub/Linux/distributions/gentoo/experimental/x86/stages/stage3-x86-1.4_pre20030214.tar.bz2 -#modules to auto-detect/copy to the initrd (put in the "/modules/storage" directory) -#aic7xxx_old removed from position after aic7xxx in attempt to fix bugs #12185 and #11278 -STORAGE_MODULES="aic79xx aic7xxx aic7xxx_old BusLogic \ -ncr53c8xx NCR53c406a \ -initio advansys aha1740 aha1542 aha152x \ -atp870u dtc eata fdomain gdth \ -megaraid pas16 pci2220i pci2000 psi240i \ -qlogicfas qlogicfc qlogicisp \ -seagate t128 tmscsim u14-34f ultrastor wd7000 \ -a100u2w 3w-xxxx DAC960 NCR53c406a \ -aacraid sym53c8xx a100u2w cpqfc \ -dmx3191d dpt_i2o imm in2000 ips qla1280 \ -sim710 sym53c416" -FIREWIRE_MODULES="ieee1394 ohci1394 eth1394 sbp2" -ATARAID_MODULES="ataraid pdcraid hptraid silraid" -PCMCIA_MODULES="pcmcia_core i82365 ds ide-cs" -USB_MODULES="usbcore ehci-hcd uhci usb-ohci hid usb-storage" - -LOOP_SIZE="900000" -KERNCONFIG=gs2-config -CD_HOSTNAME="cdimage" -CD_PORTDIR="/usr/portage" -CD_ISONAME="gentoo.iso" -ARCH=x86 -BOOTSPLASH=yes -DISTCC_HOSTS="192.168.0.1 192.168.0.2" -MAKEOPTS="-j4" diff --git a/src/livecd/profiles/kde/stage1-experimental b/src/livecd/profiles/kde/stage1-experimental deleted file mode 100644 index bd55153eb6..0000000000 --- a/src/livecd/profiles/kde/stage1-experimental +++ /dev/null @@ -1,20 +0,0 @@ -#=sys-kernel/gaming-sources-2.4.20-r3 -gs-sources -mirrorselect -#=sys-kernel/gs-sources-2.4.21_rc6 -#xfree -=media-fonts/urw-fonts-2.0-r1 -#aumix depends on xfree, so it needs to be here -#ut2003-demo -aumix -iputils -kudzu -=sys-apps/hwdata-knoppix-0.8 -hwsetup -bootsplash -=sys-apps/baselayout-1.8.6.8-r1 -#x11-libs/qt -#=media-libs/giflib-4.1.0-r3 -#mozilla -#=kde-base/kde-3.1.2 -#=gnome-base/gnome-2.2.1 diff --git a/src/livecd/profiles/kde/stage1-packages b/src/livecd/profiles/kde/stage1-packages deleted file mode 100644 index 4f062fb719..0000000000 --- a/src/livecd/profiles/kde/stage1-packages +++ /dev/null @@ -1,44 +0,0 @@ -metalog -ncftp -sys-apps/pciutils -#net-www/lynx -grub -lilo -parted -app-arch/mt-st -sys-apps/star -dev-util/strace -sys-apps/pciutils -#net-dialup/wvdial -raidtools -nfs-utils -#net-irc/irssi -jfsutils -speedtouch -#gpm -dosfstools -xfsprogs -e2fsprogs -reiserfsprogs -hdparm -app-editors/nano -sys-apps/less -net-misc/openssh -net-misc/dhcpcd -mingetty -pwgen -dietlibc -popt -dialog -=sys-apps/modutils-2.4.25 -#x11-libs/qt -xfree -=media-libs/giflib-4.1.0-r3 -#app-text/docbook-xml-dtd -#=gnome-base/gnome-2.2.1 -kde -gnome -#=kde-base/kde-3.1.2 -=sys-apps/hotplug-20020826-r2 -gcc -screen diff --git a/src/livecd/profiles/kde/stage2-experimental b/src/livecd/profiles/kde/stage2-experimental deleted file mode 100644 index 2ab65f6537..0000000000 --- a/src/livecd/profiles/kde/stage2-experimental +++ /dev/null @@ -1,5 +0,0 @@ -nvidia-kernel -nvidia-glx -ati-drivers -rp-l2tp -usbutils diff --git a/src/livecd/profiles/kde/stage2-packages b/src/livecd/profiles/kde/stage2-packages deleted file mode 100644 index f24b5d0e1f..0000000000 --- a/src/livecd/profiles/kde/stage2-packages +++ /dev/null @@ -1,12 +0,0 @@ -net-misc/nforce-net -emu10k1 -net-wireless/wireless-tools -sys-apps/iproute -sys-apps/pcmcia-cs -linux-wlan-ng -net-dialup/ppp -net-dialup/rp-pppoe -isdn4k-utils -kpnadsl4linux -pptpclient -lvm-user diff --git a/src/livecd/profiles/kde/x-setup b/src/livecd/profiles/kde/x-setup deleted file mode 100644 index acbd1c381e..0000000000 --- a/src/livecd/profiles/kde/x-setup +++ /dev/null @@ -1,79 +0,0 @@ -#!/bin/bash -#first, get paths right if we're getting started b4 login -source /etc/profile - -echo "0" > /proc/sys/kernel/printk -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "agpgart" ] - then - modprobe agpgart > /dev/null 2>&1 - fi -done - -GLTYPE=nvidia -#now, for the key component :) -modprobe nvidia > /dev/null 2>&1 -if [ "`lsmod | cut -f1 -d\" \" | grep ^nvidia$`" = "nvidia" ] -then - echo "NVIDIA driver loaded." -else - modprobe fglrx > /dev/null 2>&1 - if [ "`lsmod | cut -f1 -d\" \" | grep ^fglrx$`" = "fglrx" ] - then - echo "ATI driver loaded." - GLTYPE=ati - else - source /etc/sysconfig/xserver - echo "**********************************************************" - echo "NVIDIA or ATI drivers unable to load; aborting." - echo "" - echo "**********************************************************" - echo "" - echo "*******************************" - echo "Falling back to Xfree86 drivers" - echo "*******************************" - GLTYPE=xfree - fi - -fi -opengl-update $GLTYPE - -if [ ! -e /etc/sysconfig/mouse ] -then - "******************************" - echo "A mouse could not be detected" - echo "Trying Auto mode" - echo "******************************" - DEVICE="auto" -fi -source /etc/sysconfig/mouse - -VERTREFRESH=`ddcxinfo -vsync` - -if [ "$VERTREFRESH" = "0-0" ] -then - echo "No DDC information detected; assuming reasonable defaults." - VERTREFRESH=50-80 - HORIZSYNC=30-70 -else - HORIZSYNC=`ddcxinfo -hsync` -fi - -sed -e "s:##MOUSEPROTO##:${XMOUSETYPE}:" \ - -e "s:##MOUSEDEV##:${DEVICE}:" \ - -e "s:##VERTREFRESH##:${VERTREFRESH}:" \ - -e "s:##HORIZSYNC##:${HORIZSYNC}:" \ - -e "s:##DRIVER##:${XMODULE}:" \ -/etc/X11/XF86Config.${GLTYPE} > /etc/X11/XF86Config - -#Now, we need to export LD_PATH since env-update can't do this for us (no python, -#/etc/env.d/09opengl removed... - -cp /etc/ld.so.conf.orig /etc/ld.so.conf -echo /usr/lib/opengl/${GLTYPE}/lib >> /etc/ld.so.conf -ldconfig -#time to fire up X -exec /usr/X11R6/bin/xinit - diff --git a/src/livecd/profiles/kde/xfs-config b/src/livecd/profiles/kde/xfs-config deleted file mode 100644 index a6bd191872..0000000000 --- a/src/livecd/profiles/kde/xfs-config +++ /dev/null @@ -1,1314 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -# CONFIG_M68631 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_1GB is not set -CONFIG_2GB=y -# CONFIG_3GB is not set -# CONFIG_05GB is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -CONFIG_CARDBUS=y -CONFIG_TCIC=y -CONFIG_I82092=y -CONFIG_I82365=y - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -CONFIG_EVMS_GPT_SEGMENT_MGR=m -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -CONFIG_EVMS_OS2=m -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -# CONFIG_CRYPTO is not set -# CONFIG_CIPHERS is not set -# CONFIG_DIGESTS is not set -# CONFIG_CRYPTODEV is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_IPSEC is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -CONFIG_IDE_TASK_IOCTL=y -# CONFIG_IDE_TASKFILE_IO is not set -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_CMD680 is not set -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -# CONFIG_PDC202XX_BURST is not set -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_BUILD_FIRMWARE is not set -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -CONFIG_SCSI_SYM53C8XX=m -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC395x_TRMS1040=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -CONFIG_SCSI_PCMCIA=y -CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_FDOMAIN=m -CONFIG_PCMCIA_NINJA_SCSI=m -CONFIG_PCMCIA_QLOGIC=m - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -CONFIG_PCMCIA_IBMTR=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_AIRONET4500_CS=m - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_ECC is not set -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set - -# -# PCMCIA character devices -# -CONFIG_PCMCIA_SERIAL_CS=m -CONFIG_SYNCLINK_CS=m -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_PROC_CONFIG=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_DMAPI is not set -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -# CONFIG_IMON is not set - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_UHCI=y -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=y -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -# CONFIG_USB_USBDNET is not set -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -# CONFIG_USB_LCD is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Windows Applications support -# -# CONFIG_MKI is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/kde/xfs-kde b/src/livecd/profiles/kde/xfs-kde deleted file mode 100644 index e986dc06a2..0000000000 --- a/src/livecd/profiles/kde/xfs-kde +++ /dev/null @@ -1,1343 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODVERSIONS=y -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M686 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -# CONFIG_MK7 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -CONFIG_TOSHIBA=m -CONFIG_I8K=m -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -# CONFIG_PCMCIA is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -# CONFIG_EVMS_GPT_SEGMENT_MGR is not set -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -CONFIG_EVMS_OS2=m -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -# CONFIG_CRYPTO is not set -# CONFIG_CIPHERS is not set -# CONFIG_DIGESTS is not set -# CONFIG_CRYPTODEV is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -# CONFIG_NETFILTER is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_IPV6=y -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_IPSEC is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -# CONFIG_IDE_TASK_IOCTL is not set -# CONFIG_IDE_TASKFILE_IO is not set -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_CMD680 is not set -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -# CONFIG_PDC202XX_BURST is not set -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_BUILD_FIRMWARE is not set -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -# CONFIG_SCSI_SYM53C8XX is not set -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -CONFIG_EQUALIZER=y -CONFIG_TUN=m -CONFIG_ETHERTAP=y -CONFIG_NET_SB1000=m - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -CONFIG_FDDI=y -CONFIG_DEFXX=m -CONFIG_SKFP=m -CONFIG_HIPPI=y -CONFIG_ROADRUNNER=m -# CONFIG_ROADRUNNER_LARGE_RINGS is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_STRIP is not set -# CONFIG_WAVELAN is not set -# CONFIG_ARLAN is not set -# CONFIG_AIRONET4500 is not set -# CONFIG_AIRONET4500_NONCS is not set -# CONFIG_AIRONET4500_PROC is not set -# CONFIG_AIRO is not set -# CONFIG_HERMES is not set -# CONFIG_PLX_HERMES is not set -# CONFIG_PCI_HERMES is not set -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_IRDA_DEBUG=y - -# -# Infrared-port device drivers -# -CONFIG_IRTTY_SIR=m -CONFIG_IRPORT_SIR=m -CONFIG_DONGLE=y -CONFIG_ESI_DONGLE=m -CONFIG_ACTISYS_DONGLE=m -CONFIG_TEKRAM_DONGLE=m -CONFIG_GIRBIL_DONGLE=m -CONFIG_LITELINK_DONGLE=m -CONFIG_MCP2120_DONGLE=m -CONFIG_OLD_BELKIN_DONGLE=m -CONFIG_ACT200L_DONGLE=m -CONFIG_MA600_DONGLE=m -CONFIG_USB_IRDA=m -CONFIG_NSC_FIR=m -CONFIG_WINBOND_FIR=m -CONFIG_TOSHIBA_FIR=m -CONFIG_SMC_IRCC_FIR=m -CONFIG_ALI_FIR=m -CONFIG_VLSI_FIR=m - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -CONFIG_ISDN_DRV_LOOP=m -CONFIG_ISDN_DIVERSION=m - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_ECC is not set -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -CONFIG_AGP_INTEL=y -CONFIG_AGP_I810=y -CONFIG_AGP_VIA=y -CONFIG_AGP_AMD=y -CONFIG_AGP_AMD_8151=y -# CONFIG_AGP_SIS is not set -CONFIG_AGP_ALI=y -CONFIG_AGP_SWORKS=y -# CONFIG_DRM is not set -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -CONFIG_VXFS_FS=m -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_PROC_CONFIG=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -CONFIG_XFS_QUOTA=y -CONFIG_XFS_DMAPI=y -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_ROOT_NFS is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -CONFIG_NCP_FS=m -CONFIG_NCPFS_PACKET_SIGNING=y -CONFIG_NCPFS_IOCTL_LOCKING=y -CONFIG_NCPFS_STRONG=y -CONFIG_NCPFS_NFS_NS=y -CONFIG_NCPFS_OS2_NS=y -CONFIG_NCPFS_SMALLDOS=y -CONFIG_NCPFS_NLS=y -CONFIG_NCPFS_EXTRAS=y -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -CONFIG_VIDEO_SELECT=y -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -CONFIG_FB=y -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FB_LOGO_TUX is not set -# CONFIG_FB_LOGO_LARRY is not set -# CONFIG_FB_LOGO_GENTOO is not set -# CONFIG_FB_LOGO_G is not set -# CONFIG_FB_LOGO_PENGUIN is not set -CONFIG_FB_LOGO_POWEREDBY=y -# CONFIG_FB_RIVA is not set -# CONFIG_FB_CLGEN is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_VESA=y -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_HGA is not set -CONFIG_VIDEO_SELECT=y -# CONFIG_FB_MATROX is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_FBCON_SPLASHSCREEN=y -CONFIG_FBCON_CFB16=y -# CONFIG_FBCON_ADVANCED is not set -CONFIG_FBCON_CFB8=y -CONFIG_FBCON_CFB16=y -CONFIG_FBCON_CFB24=y -CONFIG_FBCON_CFB32=y -# CONFIG_FBCON_FONTWIDTH8_ONLY is not set -# CONFIG_FBCON_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_SOUND_ALI5455=m -CONFIG_SOUND_BT878=m -CONFIG_SOUND_CMPCI=m -# CONFIG_SOUND_CMPCI_FM is not set -# CONFIG_SOUND_CMPCI_MIDI is not set -# CONFIG_SOUND_CMPCI_JOYSTICK is not set -# CONFIG_SOUND_CMPCI_CM8738 is not set -CONFIG_SOUND_EMU10K1=m -CONFIG_MIDI_EMU10K1=y -CONFIG_SOUND_FUSION=m -CONFIG_SOUND_CS4281=m -CONFIG_SOUND_ES1370=m -CONFIG_SOUND_ES1371=m -CONFIG_SOUND_ESSSOLO1=m -CONFIG_SOUND_MAESTRO=m -CONFIG_SOUND_MAESTRO3=m -CONFIG_SOUND_FORTE=m -CONFIG_SOUND_ICH=m -CONFIG_SOUND_RME96XX=m -CONFIG_SOUND_SONICVIBES=m -CONFIG_SOUND_TRIDENT=m -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -CONFIG_SOUND_VIA82CXXX=m -CONFIG_MIDI_VIA82CXXX=y -CONFIG_SOUND_OSS=m -# CONFIG_SOUND_TRACEINIT is not set -# CONFIG_SOUND_DMAP is not set -CONFIG_SOUND_AD1816=m -CONFIG_SOUND_SGALAXY=m -CONFIG_SOUND_ADLIB=m -CONFIG_SOUND_ACI_MIXER=m -CONFIG_SOUND_CS4232=m -CONFIG_SOUND_SSCAPE=m -CONFIG_SOUND_GUS=m -# CONFIG_SOUND_GUS16 is not set -# CONFIG_SOUND_GUSMAX is not set -# CONFIG_SOUND_VMIDI is not set -# CONFIG_SOUND_TRIX is not set -# CONFIG_SOUND_MSS is not set -# CONFIG_SOUND_MPU401 is not set -# CONFIG_SOUND_NM256 is not set -# CONFIG_SOUND_MAD16 is not set -# CONFIG_SOUND_PAS is not set -# CONFIG_PAS_JOYSTICK is not set -# CONFIG_SOUND_PSS is not set -CONFIG_SOUND_SB=m -# CONFIG_SOUND_AWE32_SYNTH is not set -# CONFIG_SOUND_WAVEFRONT is not set -# CONFIG_SOUND_MAUI is not set -CONFIG_SOUND_YM3812=m -CONFIG_SOUND_OPL3SA1=m -CONFIG_SOUND_OPL3SA2=m -CONFIG_SOUND_YMFPCI=m -# CONFIG_SOUND_YMFPCI_LEGACY is not set -# CONFIG_SOUND_UART6850 is not set -CONFIG_SOUND_AEDSP16=m -# CONFIG_SC6600 is not set -# CONFIG_AEDSP16_SBPRO is not set -# CONFIG_SOUND_TVMIXER is not set - -# -# USB support -# -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=m -CONFIG_USB_UHCI_ALT=m -CONFIG_USB_OHCI=m -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -CONFIG_USB_BLUETOOTH=m -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_TIGL=m -CONFIG_USB_BRLVGER=m -CONFIG_USB_LCD=m - -# -# Bluetooth support -# -CONFIG_BLUEZ=m -CONFIG_BLUEZ_L2CAP=m -CONFIG_BLUEZ_SCO=m -CONFIG_BLUEZ_BNEP=m -CONFIG_BNEP_MC_FILTER=y -CONFIG_BNEP_PROTO_FILTER=y - -# -# Bluetooth device drivers -# -CONFIG_BLUEZ_HCIUSB=m -# CONFIG_BLUEZ_USB_ZERO_PACKET is not set -CONFIG_BLUEZ_HCIUART=m -CONFIG_BLUEZ_HCIUART_H4=y -# CONFIG_BLUEZ_HCIDTL1 is not set -# CONFIG_BLUEZ_HCIBT3C is not set -# CONFIG_BLUEZ_HCIBLUECARD is not set -CONFIG_BLUEZ_HCIVHCI=m - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m - -# -# Grsecurity -# -# CONFIG_GRKERNSEC is not set diff --git a/src/livecd/profiles/kde/xfs2-config b/src/livecd/profiles/kde/xfs2-config deleted file mode 100644 index 07467409c2..0000000000 --- a/src/livecd/profiles/kde/xfs2-config +++ /dev/null @@ -1,1410 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M686 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -# CONFIG_MK7 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -CONFIG_CARDBUS=y -CONFIG_TCIC=y -CONFIG_I82092=y -CONFIG_I82365=y - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -CONFIG_EVMS_GPT_SEGMENT_MGR=m -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -CONFIG_EVMS_OS2=m -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -# CONFIG_CRYPTO is not set -# CONFIG_CIPHERS is not set -# CONFIG_DIGESTS is not set -# CONFIG_CRYPTODEV is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -# CONFIG_IP_NF_MATCH_STEALTH is not set -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_IPSEC is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -CONFIG_IDE_TASK_IOCTL=y -# CONFIG_IDE_TASKFILE_IO is not set -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_CMD680 is not set -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -# CONFIG_PDC202XX_BURST is not set -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_BUILD_FIRMWARE is not set -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -CONFIG_SCSI_SYM53C8XX=m -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -CONFIG_SCSI_PCMCIA=y -CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_FDOMAIN=m -CONFIG_PCMCIA_NINJA_SCSI=m -CONFIG_PCMCIA_QLOGIC=m - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -CONFIG_PCMCIA_IBMTR=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_AIRONET4500_CS=m - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_ECC is not set -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -CONFIG_AGP_INTEL=y -CONFIG_AGP_I810=y -CONFIG_AGP_VIA=y -CONFIG_AGP_AMD=y -CONFIG_AGP_AMD_8151=y -CONFIG_AGP_SIS=y -CONFIG_AGP_ALI=y -# CONFIG_AGP_SWORKS is not set -# CONFIG_DRM is not set - -# -# PCMCIA character devices -# -CONFIG_PCMCIA_SERIAL_CS=m -CONFIG_SYNCLINK_CS=m -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_PROC_CONFIG=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_DMAPI is not set -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -CONFIG_VIDEO_SELECT=y -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -CONFIG_FB=y -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FB_LOGO_TUX is not set -# CONFIG_FB_LOGO_LARRY is not set -# CONFIG_FB_LOGO_GENTOO is not set -# CONFIG_FB_LOGO_G is not set -# CONFIG_FB_LOGO_PENGUIN is not set -CONFIG_FB_LOGO_POWEREDBY=y -# CONFIG_FB_RIVA is not set -# CONFIG_FB_CLGEN is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_VESA is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_HGA is not set -CONFIG_VIDEO_SELECT=y -# CONFIG_FB_MATROX is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_FBCON_SPLASHSCREEN=y -CONFIG_FBCON_CFB16=y -# CONFIG_FBCON_ADVANCED is not set -# CONFIG_FBCON_FONTWIDTH8_ONLY is not set -# CONFIG_FBCON_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_SOUND_ALI5455=m -CONFIG_SOUND_BT878=m -CONFIG_SOUND_CMPCI=m -# CONFIG_SOUND_CMPCI_FM is not set -# CONFIG_SOUND_CMPCI_MIDI is not set -# CONFIG_SOUND_CMPCI_JOYSTICK is not set -# CONFIG_SOUND_CMPCI_CM8738 is not set -CONFIG_SOUND_EMU10K1=m -# CONFIG_MIDI_EMU10K1 is not set -CONFIG_SOUND_FUSION=m -CONFIG_SOUND_CS4281=m -CONFIG_SOUND_ES1370=m -CONFIG_SOUND_ES1371=m -CONFIG_SOUND_ESSSOLO1=m -CONFIG_SOUND_MAESTRO=m -CONFIG_SOUND_MAESTRO3=m -CONFIG_SOUND_FORTE=m -CONFIG_SOUND_ICH=m -CONFIG_SOUND_RME96XX=m -CONFIG_SOUND_SONICVIBES=m -CONFIG_SOUND_TRIDENT=m -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -CONFIG_SOUND_VIA82CXXX=m -CONFIG_MIDI_VIA82CXXX=y -CONFIG_SOUND_OSS=m -# CONFIG_SOUND_TRACEINIT is not set -# CONFIG_SOUND_DMAP is not set -CONFIG_SOUND_AD1816=m -CONFIG_SOUND_SGALAXY=m -CONFIG_SOUND_ADLIB=m -CONFIG_SOUND_ACI_MIXER=m -CONFIG_SOUND_CS4232=m -CONFIG_SOUND_SSCAPE=m -CONFIG_SOUND_GUS=m -# CONFIG_SOUND_GUS16 is not set -CONFIG_SOUND_GUSMAX=y -# CONFIG_SOUND_VMIDI is not set -CONFIG_SOUND_TRIX=m -CONFIG_SOUND_MSS=m -CONFIG_SOUND_MPU401=m -CONFIG_SOUND_NM256=m -CONFIG_SOUND_MAD16=m -# CONFIG_MAD16_OLDCARD is not set -CONFIG_SOUND_PAS=m -# CONFIG_PAS_JOYSTICK is not set -CONFIG_SOUND_PSS=m -CONFIG_PSS_MIXER=y -# CONFIG_PSS_HAVE_BOOT is not set -CONFIG_SOUND_SB=m -CONFIG_SOUND_AWE32_SYNTH=m -CONFIG_SOUND_WAVEFRONT=m -# CONFIG_SOUND_MAUI is not set -CONFIG_SOUND_YM3812=m -CONFIG_SOUND_OPL3SA1=m -CONFIG_SOUND_OPL3SA2=m -CONFIG_SOUND_YMFPCI=m -# CONFIG_SOUND_YMFPCI_LEGACY is not set -# CONFIG_SOUND_UART6850 is not set -CONFIG_SOUND_AEDSP16=m -# CONFIG_SC6600 is not set -# CONFIG_AEDSP16_SBPRO is not set -# CONFIG_AEDSP16_MSS is not set -# CONFIG_AEDSP16_MPU401 is not set -# CONFIG_SOUND_TVMIXER is not set - -# -# USB support -# -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=m -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=m -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -CONFIG_USB_RIO500=m -CONFIG_USB_AUERSWALD=m -CONFIG_USB_TIGL=m -CONFIG_USB_BRLVGER=m -CONFIG_USB_LCD=m - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m - -# -# Grsecurity -# -# CONFIG_GRKERNSEC is not set diff --git a/src/livecd/profiles/kde/xinitrc b/src/livecd/profiles/kde/xinitrc deleted file mode 100644 index 6530fa4b3f..0000000000 --- a/src/livecd/profiles/kde/xinitrc +++ /dev/null @@ -1,37 +0,0 @@ -#!/bin/bash -#this xinitrc uses xrandr to detect the current resolution, and then sets the appropriate -#resolution. -REALX=`xrandr | grep "^\*" | awk '{ print $2 }'` -REALY=`xrandr | grep "^\*" | awk '{ print $4 }'` -OK=0 -for NEWRES in 1600x1200 1280x1024 1280x960 1024x768 800x600 640x480 512x384 320x200 -do - - NEWX=${NEWRES%%x*} - NEWY=${NEWRES##*x} - echo $NEWRES - if [ $NEWX -gt $REALX ] - then - #the NEWX is higher than our current Y res; continue.... - continue - fi - echo REALY $REALY - echo NEWY $NEWY - if [ $REALY -lt $NEWY ] - then - #our current Y res is less than our NEWY; continue... - continue - fi - #if we've gotten here, we want to use NEWXxNEWY as our aa resolution - OK=1 - break - - -done -#tweak configuration file here -if [ "$OK" = "0" ] -then - echo ".xinitrc: couldn't identify proper Xfree resolution; exiting." - exit 1 -fi -startkde diff --git a/src/livecd/profiles/local/settings b/src/livecd/profiles/local/settings deleted file mode 100644 index b7e1cb0232..0000000000 --- a/src/livecd/profiles/local/settings +++ /dev/null @@ -1,4 +0,0 @@ -CD_DISTDIR=/home/distfiles -CD_PORTDIR=/usr/portage -CD_TEMPROOT=/var/tmp -CD_STAGELOC=/home/drobbins diff --git a/src/livecd/profiles/lw-ut2003/README b/src/livecd/profiles/lw-ut2003/README deleted file mode 100644 index c64621732b..0000000000 --- a/src/livecd/profiles/lw-ut2003/README +++ /dev/null @@ -1,31 +0,0 @@ - -***** use livecd-ng in this dir ***** - - - -script does : - -Add Hotplug to default runlevel ,change /etc/init.d/hotplug to run before local - -need to blacklist usbcore or will error on module load (built in kernel) - -add new user aliases: -alias cp='cp -i' -alias ls='ls --color' -alias mv='mv -i' -alias pico='nano -w' -alias rm='rm -i' - -change /etc/conf.d/net for dhcp (for hotplug) - -rm /lib/evms/libe2fsim.1.2.1.so (broken un-needed plugin that causes errors) until fixed by evms ppl - -cp lw/md /etc/init.d / add md to runlevel default (noraid boot option) - -rc-update add serial default - -mv modules.conf. > modules.conf so ppp works automagically - -cp install.txt to cdroot, change linuxrc to create symlink - -add hwsetup init - diff --git a/src/livecd/profiles/lw-ut2003/XF86Config.ATI b/src/livecd/profiles/lw-ut2003/XF86Config.ATI deleted file mode 100644 index 8654ab8758..0000000000 --- a/src/livecd/profiles/lw-ut2003/XF86Config.ATI +++ /dev/null @@ -1,152 +0,0 @@ -Section "dri" - Mode 0666 -EndSection - -# ********************************************************************** -# Module section -- this section is used to specify -# which dynamically loadable modules to load. -# ********************************************************************** -# -Section "Module" - -# This loads the DBE extension module. - - Load "dbe" # Double buffer extension - -# This loads the miscellaneous extensions module, and disables -# initialisation of the XFree86-DGA extension within that module. - SubSection "extmod" - Option "omit xfree86-dga" # don't initialise the DGA extension - EndSubSection - -# This loads the Type1 and FreeType font modules - Load "type1" - Load "freetype" - -# This loads the GLX module - Load "glx" # libglx.a - Load "dri" # libdri.a - -EndSection - -# ********************************************************************** -# Files section. This allows default font and rgb paths to be set -# ********************************************************************** - -Section "Files" - -# The location of the RGB database. Note, this is the name of the -# file minus the extension (like ".txt" or ".db"). There is normally -# no need to change the default. - - RgbPath "/usr/X11R6/lib/X11/rgb" - -# Multiple FontPath entries are allowed (which are concatenated together), -# as well as specifying multiple comma-separated entries in one FontPath -# command (or a combination of both methods) -# -# If you don't have a floating point coprocessor and emacs, Mosaic or other -# programs take long to start up, try moving the Type1 and Speedo directory -# to the end of this list (or comment them out). -# - - FontPath "/usr/X11R6/lib/X11/fonts/local/" - FontPath "/usr/X11R6/lib/X11/fonts/misc/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" - FontPath "/usr/X11R6/lib/X11/fonts/Type1/" - FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" - -# The module search path. The default path is shown here. - -# ModulePath "/usr/X11R6/lib/modules" - -EndSection - - -Section "InputDevice" - - Identifier "Keyboard1" - Driver "Keyboard" - Option "AutoRepeat" "500 30" - Option "XkbRules" "xfree86" - Option "XkbModel" "pc101" - Option "XkbLayout" "us" - -EndSection - -Section "InputDevice" - - Identifier "Mouse1" - Driver "mouse" - Option "Protocol" "##MOUSEPROTO##" - Option "ZAxisMapping" "4 5" - Option "Device" "##MOUSEDEV##" - -EndSection - -Section "Monitor" - Identifier "Monitor0" - HorizSync ##HORIZSYNC## - VertRefresh ##VERTREFRESH## -EndSection - -Section "Device" - Identifier "ATI Graphics Adapter" - Driver "fglrx" - Option "no_accel" "no" - Option "no_dri" "no" - Option "DesktopSetup" "0x00000000" - Option "MonitorLayout" "AUTO, AUTO" - Option "IgnoreEDID" "off" - Option "HSync2" "unspecified" - Option "VRefresh2" "unspecified" - Option "ScreenOverlap" "0" - Option "GammaCorrectionI" "0x00000000" - Option "GammaCorrectionII" "0x00000000" -# === OpenGL specific profiles/settings === - Option "Capabilities" "0x00000800" -# === Video Overlay for the Xv extension === - Option "VideoOverlay" "on" -# === OpenGL Overlay === -# Note: When OpenGL Overlay is enabled, Video Overlay -# will be disabled automatically - Option "OpenGLOverlay" "off" -# === Misc Options === - Option "UseFastTLS" "0" - Option "BlockSignalsOnLock" "on" - Option "UseInternalAGPGART" "yes" - Option "ForceGenericCPU" "no" - Screen 0 -EndSection - -# ********************************************************************** -# Screen sections -# ********************************************************************** - -# Any number of screen sections may be present. Each describes -# the configuration of a single screen. A single specific screen section -# may be specified from the X server command line with the "-screen" -# option. -Section "Screen" - Identifier "Screen0" - Device "ATI Graphics Adapter" - Monitor "Monitor0" - DefaultDepth 24 - #Option "backingstore" - - Subsection "Display" - Depth 24 - Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" "512x384" - ViewPort 0 0 - EndSubsection -EndSection - -Section "ServerLayout" - Identifier "Server Layout" - Screen "Screen0" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection diff --git a/src/livecd/profiles/lw-ut2003/XF86Config.ati b/src/livecd/profiles/lw-ut2003/XF86Config.ati deleted file mode 100644 index 4f62e673e0..0000000000 --- a/src/livecd/profiles/lw-ut2003/XF86Config.ati +++ /dev/null @@ -1,153 +0,0 @@ -Section "dri" - Mode 0666 -EndSection - -# ********************************************************************** -# Module section -- this section is used to specify -# which dynamically loadable modules to load. -# ********************************************************************** -# -Section "Module" - -# This loads the DBE extension module. - - Load "dbe" # Double buffer extension - -# This loads the miscellaneous extensions module, and disables -# initialisation of the XFree86-DGA extension within that module. - SubSection "extmod" - Option "omit xfree86-dga" # don't initialise the DGA extension - EndSubSection - -# This loads the Type1 and FreeType font modules - Load "type1" - Load "freetype" - -# This loads the GLX module - Load "glx" # libglx.a - Load "dri" # libdri.a - -EndSection - -# ********************************************************************** -# Files section. This allows default font and rgb paths to be set -# ********************************************************************** - -Section "Files" - -# The location of the RGB database. Note, this is the name of the -# file minus the extension (like ".txt" or ".db"). There is normally -# no need to change the default. - - RgbPath "/usr/X11R6/lib/X11/rgb" - -# Multiple FontPath entries are allowed (which are concatenated together), -# as well as specifying multiple comma-separated entries in one FontPath -# command (or a combination of both methods) -# -# If you don't have a floating point coprocessor and emacs, Mosaic or other -# programs take long to start up, try moving the Type1 and Speedo directory -# to the end of this list (or comment them out). -# - - - FontPath "/usr/X11R6/lib/X11/fonts/local/" - FontPath "/usr/X11R6/lib/X11/fonts/misc/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" - FontPath "/usr/X11R6/lib/X11/fonts/Type1/" - FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" - -# The module search path. The default path is shown here. - -# ModulePath "/usr/X11R6/lib/modules" - -EndSection - - -Section "InputDevice" - - Identifier "Keyboard1" - Driver "Keyboard" - Option "AutoRepeat" "500 30" - Option "XkbRules" "xfree86" - Option "XkbModel" "pc101" - Option "XkbLayout" "us" - -EndSection - -Section "InputDevice" - - Identifier "Mouse1" - Driver "mouse" - Option "Protocol" "##MOUSEPROTO##" - Option "ZAxisMapping" "4 5" - Option "Device" "##MOUSEDEV##" - -EndSection - -Section "Monitor" - Identifier "Monitor0" - HorizSync ##HORIZSYNC## - VertRefresh ##VERTREFRESH## -EndSection - -Section "Device" - Identifier "ATI Graphics Adapter" - Driver "fglrx" - Option "no_accel" "no" - Option "no_dri" "no" - Option "DesktopSetup" "0x00000000" - Option "MonitorLayout" "AUTO, AUTO" - Option "IgnoreEDID" "off" - Option "HSync2" "unspecified" - Option "VRefresh2" "unspecified" - Option "ScreenOverlap" "0" - Option "GammaCorrectionI" "0x00000000" - Option "GammaCorrectionII" "0x00000000" -# === OpenGL specific profiles/settings === - Option "Capabilities" "0x00000800" -# === Video Overlay for the Xv extension === - Option "VideoOverlay" "on" -# === OpenGL Overlay === -# Note: When OpenGL Overlay is enabled, Video Overlay -# will be disabled automatically - Option "OpenGLOverlay" "off" -# === Misc Options === - Option "UseFastTLS" "0" - Option "BlockSignalsOnLock" "on" - Option "UseInternalAGPGART" "yes" - Option "ForceGenericCPU" "no" - Screen 0 -EndSection - -# ********************************************************************** -# Screen sections -# ********************************************************************** - -# Any number of screen sections may be present. Each describes -# the configuration of a single screen. A single specific screen section -# may be specified from the X server command line with the "-screen" -# option. -Section "Screen" - Identifier "Screen0" - Device "ATI Graphics Adapter" - Monitor "Monitor0" - DefaultDepth 24 - #Option "backingstore" - - Subsection "Display" - Depth 24 - Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" "512x384" - ViewPort 0 0 - EndSubsection -EndSection - -Section "ServerLayout" - Identifier "Server Layout" - Screen "Screen0" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection diff --git a/src/livecd/profiles/lw-ut2003/XF86Config.master b/src/livecd/profiles/lw-ut2003/XF86Config.master deleted file mode 100644 index f74f851cac..0000000000 --- a/src/livecd/profiles/lw-ut2003/XF86Config.master +++ /dev/null @@ -1,108 +0,0 @@ -Section "ServerLayout" - Identifier "XFree86 Configured" - Screen 0 "Screen0" 0 0 - InputDevice "Mouse0" "CorePointer" - InputDevice "Keyboard0" "CoreKeyboard" -EndSection - -Section "Files" - RgbPath "/usr/X11R6/lib/X11/rgb" - ModulePath "/usr/X11R6/lib/modules" - FontPath "/usr/X11R6/lib/X11/fonts/misc/" - FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" - FontPath "/usr/X11R6/lib/X11/fonts/Type1/" - FontPath "/usr/X11R6/lib/X11/fonts/CID/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" -EndSection - -Section "Module" - Load "dbe" -# Load "dri" - Load "extmod" - Load "glx" - Load "record" - Load "xtrap" - Load "speedo" - Load "type1" -EndSection - -Section "InputDevice" - Identifier "Keyboard0" - Driver "keyboard" -EndSection - -Section "InputDevice" - Identifier "Mouse0" - Driver "mouse" - Option "Protocol" "##MOUSEPROTO##" - Option "Device" "##MOUSEDEV##" - Option "ZAxisMapping" "4 5" -EndSection - -Section "Monitor" - Identifier "Monitor0" - VendorName "Monitor Vendor" - ModelName "Monitor Model" - HorizSync ##HORIZSYNC## - VertRefresh ##VERTREFRESH## -EndSection - -Section "Device" - ### Available Driver options are:- - ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", - ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" - ### [arg]: arg optional - #Option "DigitalVibrance" # <i> - #Option "PageFlip" # [<bool>] - #Option "Dac8Bit" # [<bool>] - #Option "NoLogo" # [<bool>] - #Option "Overlay" # [<bool>] - #Option "UBB" # [<bool>] - #Option "Stereo" # [<bool>] - #Option "BlueLine" # [<bool>] - #Option "WindowFlip" # [<bool>] - #Option "SWcursor" # [<bool>] - #Option "HWcursor" # [<bool>] - #Option "VideoKey" # <i> - #Option "NvAGP" # <i> - #Option "PixmapCacheLines" # <i> - #Option "IgnoreEDID" # [<bool>] - #Option "NoDDC" # [<bool>] - #Option "ConnectedMonitor" # <str> - #Option "ConnectedMonitors" # <str> - #Option "TVStandard" # <str> - #Option "TVOutFormat" # <str> - #Option "NoRenderAccel" # [<bool>] - Option "CursorShadow" "1" # [<bool>] - #Option "CursorShadowAlpha" # <i> - #Option "CursorShadowXOffset" # <i> - #Option "CursorShadowYOffset" # <i> - #Option "UseEdidFreqs" # [<bool>] - #Option "FlatPanelProperties" # <str> - #Option "TwinView" # [<bool>] - #Option "TwinViewOrientation" # <str> - #Option "SecondMonitorHorizSync" # <str> - #Option "SecondMonitorVertRefresh" # <str> - #Option "MetaModes" # <str> - #Option "UseInt10Module" # [<bool>] - #Option "SwapReady" # [<bool>] - #Option "NoTwinViewXineramaInfo" # [<bool>] - #Option "NoRenderExtension" # [<bool>] - Identifier "Card0" - Driver "nvidia" - VendorName "NVidia" -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Card0" - Monitor "Monitor0" - DefaultColorDepth 24 - SubSection "Display" - Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" "512x384" - Depth 24 - ViewPort 0 0 - EndSubSection -EndSection - diff --git a/src/livecd/profiles/lw-ut2003/XF86Config.nvidia b/src/livecd/profiles/lw-ut2003/XF86Config.nvidia deleted file mode 100644 index 44ca0c4752..0000000000 --- a/src/livecd/profiles/lw-ut2003/XF86Config.nvidia +++ /dev/null @@ -1,105 +0,0 @@ -Section "ServerLayout" - Identifier "XFree86 Configured" - Screen 0 "Screen0" 0 0 - InputDevice "Mouse0" "CorePointer" - InputDevice "Keyboard0" "CoreKeyboard" -EndSection - -Section "Files" - RgbPath "/usr/X11R6/lib/X11/rgb" - ModulePath "/usr/X11R6/lib/modules" - - FontPath "/usr/X11R6/lib/X11/fonts/misc/" - FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" - FontPath "/usr/X11R6/lib/X11/fonts/Type1/" - FontPath "/usr/X11R6/lib/X11/fonts/CID/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" -EndSection - -Section "Module" - Load "dbe" -# Load "dri" - Load "extmod" - Load "glx" - Load "record" - Load "xtrap" - Load "speedo" - Load "type1" -EndSection - -Section "InputDevice" - Identifier "Keyboard0" - Driver "keyboard" -EndSection - -Section "InputDevice" - Identifier "Mouse0" - Driver "mouse" - Option "Protocol" "##MOUSEPROTO##" - Option "Device" "##MOUSEDEV##" - Option "ZAxisMapping" "4 5" -EndSection - -Section "Monitor" - Identifier "Monitor0" - VendorName "Monitor Vendor" - ModelName "Monitor Model" - HorizSync ##HORIZSYNC## - VertRefresh ##VERTREFRESH## -EndSection - -Section "Device" - ### Available Driver options are:- - ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", - ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" - ### [arg]: arg optional - #Option "DigitalVibrance" # <i> - #Option "PageFlip" # [<bool>] - #Option "Dac8Bit" # [<bool>] - #Option "NoLogo" # [<bool>] - #Option "Overlay" # [<bool>] - #Option "UBB" # [<bool>] - #Option "Stereo" # [<bool>] - #Option "BlueLine" # [<bool>] - #Option "WindowFlip" # [<bool>] - #Option "SWcursor" # [<bool>] - #Option "HWcursor" # [<bool>] - #Option "VideoKey" # <i> - #Option "NvAGP" # <i> - #Option "PixmapCacheLines" # <i> - #Option "IgnoreEDID" # [<bool>] - #Option "NoDDC" # [<bool>] - #Option "ConnectedMonitors" # <str> - #Option "TVStandard" # <str> - #Option "TVOutFormat" # <str> - #Option "NoRenderAccel" # [<bool>] - Option "CursorShadow" "1" # [<bool>] - #Option "CursorShadowAlpha" # <i> - #Option "CursorShadowXOffset" # <i> - #Option "CursorShadowYOffset" # <i> - #Option "UseEdidFreqs" # [<bool>] - #Option "FlatPanelProperties" # <str> - #Option "SecondMonitorHorizSync" # <str> - #Option "SecondMonitorVertRefresh" # <str> - #Option "UseInt10Module" # [<bool>] - #Option "SwapReady" # [<bool>] - #Option "NoTwinViewXineramaInfo" # [<bool>] - #Option "NoRenderExtension" # [<bool>] - Identifier "Card0" - Driver "nvidia" - VendorName "NVidia" -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Card0" - Monitor "Monitor0" - DefaultColorDepth 24 - SubSection "Display" - Modes "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" "512x384" - Depth 24 - ViewPort 0 0 - EndSubSection -EndSection - diff --git a/src/livecd/profiles/lw-ut2003/XF86Config.xfree b/src/livecd/profiles/lw-ut2003/XF86Config.xfree deleted file mode 100644 index 24109eb6b9..0000000000 --- a/src/livecd/profiles/lw-ut2003/XF86Config.xfree +++ /dev/null @@ -1,125 +0,0 @@ -Section "dri" - Mode 0666 -EndSection - -# ********************************************************************** -# Module section -- this section is used to specify -# which dynamically loadable modules to load. -# ********************************************************************** -# -Section "Module" - -# This loads the DBE extension module. - - Load "dbe" # Double buffer extension - -# This loads the miscellaneous extensions module, and disables -# initialisation of the XFree86-DGA extension within that module. - SubSection "extmod" - Option "omit xfree86-dga" # don't initialise the DGA extension - EndSubSection - -# This loads the Type1 and FreeType font modules - Load "type1" - Load "freetype" - -EndSection - -# ********************************************************************** -# Files section. This allows default font and rgb paths to be set -# ********************************************************************** - -Section "Files" - -# The location of the RGB database. Note, this is the name of the -# file minus the extension (like ".txt" or ".db"). There is normally -# no need to change the default. - - RgbPath "/usr/X11R6/lib/X11/rgb" - -# Multiple FontPath entries are allowed (which are concatenated together), -# as well as specifying multiple comma-separated entries in one FontPath -# command (or a combination of both methods) -# -# If you don't have a floating point coprocessor and emacs, Mosaic or other -# programs take long to start up, try moving the Type1 and Speedo directory -# to the end of this list (or comment them out). -# - - - FontPath "/usr/X11R6/lib/X11/fonts/local/" - FontPath "/usr/X11R6/lib/X11/fonts/misc/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" - FontPath "/usr/X11R6/lib/X11/fonts/Type1/" - FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" - -# The module search path. The default path is shown here. - - ModulePath "/usr/X11R6/lib/modules" - -EndSection - - -Section "InputDevice" - - Identifier "Keyboard1" - Driver "Keyboard" - Option "AutoRepeat" "500 30" - Option "XkbRules" "xfree86" - Option "XkbModel" "pc101" - Option "XkbLayout" "us" - -EndSection - -Section "InputDevice" - - Identifier "Mouse1" - Driver "mouse" - Option "Protocol" "##MOUSEPROTO##" - Option "ZAxisMapping" "4 5" - Option "Device" "##MOUSEDEV##" - -EndSection - -Section "Monitor" - Identifier "Monitor0" - HorizSync ##HORIZSYNC## - VertRefresh ##VERTREFRESH## -EndSection - -Section "Device" - Identifier "Vesa Graphics Adapter" - Driver "vesa" - Screen 0 -EndSection - -# ********************************************************************** -# Screen sections -# ********************************************************************** - -# Any number of screen sections may be present. Each describes -# the configuration of a single screen. A single specific screen section -# may be specified from the X server command line with the "-screen" -# option. -Section "Screen" - Identifier "Screen0" - Device "Vesa Graphics Adapter" - Monitor "Monitor0" - DefaultDepth 24 - - Subsection "Display" - Depth 24 - Modes "1024x768" - ViewPort 0 0 - EndSubsection -EndSection - -Section "ServerLayout" - Identifier "Server Layout" - Screen "Screen0" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection diff --git a/src/livecd/profiles/lw-ut2003/aux-files/1024.initrd b/src/livecd/profiles/lw-ut2003/aux-files/1024.initrd Binary files differdeleted file mode 100644 index 7cdda38937..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/1024.initrd +++ /dev/null diff --git a/src/livecd/profiles/lw-ut2003/aux-files/autoconfig b/src/livecd/profiles/lw-ut2003/aux-files/autoconfig deleted file mode 100644 index c9acb5efff..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/autoconfig +++ /dev/null @@ -1,173 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw-ut2003/aux-files/Attic/autoconfig,v 1.1 2003/10/19 03:46:49 livewire Exp $ -echo "0" > /proc/sys/kernel/printk -DHCP="yes" -DETECT="yes" -PCMCIA="no" -HOTPLUG="yes" -APM="no" -ACPI="no" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "nodetect" ] - then - DETECT="no" - HOTPLUG="no" - APM="no" - ACPI="no" - fi -done -for x in $CMDLINE -do - if [ "$x" = "nodhcp" ] - then - DHCP="no" - fi -done -for x in $CMDLINE -do - if [ "$x" = "dopcmcia" ] - then - PCMCIA="yes" - fi -done -for x in $CMDLINE -do - if [ "$x" = "nohotplug" ] - then - HOTPLUG="no" - fi -done -for x in $CMDLINE -do - if [ "$x" = "noapm" ] - then - APM="no" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "acpi=on" ] - then - APM="no" - ACPI="yes" - fi -done - - -depend() { - after * - after urandom -} - -start() { -if [ "$DETECT" = "yes" ] - then - ebegin $WARN"Hardware detection started" - PC=`awk -F: '/^processor/{printf "Processor"$2" is"};/^model name/{printf $2};/^vendor_id/{printf vendor};/^cpu MHz/{printf " %dMHz",int($2)};/^cache size/{printf ","$2" Cache"};/^$/{print ""}' /proc/cpuinfo 2>/dev/null` - ebegin $GOOD"$PC" - eend - hwsetup -p >/dev/null - eend - else - ebegin $WARN"Hardware detection disabled via cmdline$NORMAL" -fi - -if [ "$APM" = "no" ] - then - ebegin $GOOD"Not Loading APM Bios support.${NORMAL}" - else - insmod apm power_off=1 >/dev/null 2>&1 && ebegin $GOOD"APM BIOS found, power management functions enabled.$NORMAL" - /etc/init.d/apmd start - eend -fi - - -if [ "$ACPI" = "yes" ] - then - insmod processor >/dev/null 2>&1 && ebegin $GOOD ACPI power management functions enabled.$NORMAL - insmod fan >/dev/null - insmod thermal >/dev/null - insmod button >/dev/null - insmod battery >/dev/null - insmod ac >/dev/null - /etc/init.d/acpid start - eend -fi - -if [ "$PCMCIA" = "yes" ] - then - ebegin $HILITE "PCMCIA enabled via cmdline" - /etc/init.d/pcmcia start -fi - -if [ "$DHCP" = "no" ] - then - sed 's/iface_eth0="dhcp"/#iface_eth0="dhcp"/' /etc/conf.d/net > /etc/conf.d/net1 - cp /etc/conf.d/net1 /etc/conf.d/net - rm /etc/conf.d/net1 - ebegin $BAD"Skipping DHCP broadcast detection as requested on boot commandline." -fi - - #Read in what hwsetup has found -[ -f /etc/sysconfig/knoppix ] && . /etc/sysconfig/knoppix - -# Mouse -if [ -n "$MOUSE_DEVICE" ] - then - ebegin $GOOD"Mouse is $HILITE$MOUSE_FULLNAME$GOOD at $HILITE$MOUSE_DEVICE$NORMAL" - eend -fi - -if [ "$HOTPLUG" = "yes" ] - then - /etc/init.d/hotplug start - else - ebegin $BAD"Hotplug disabled via cmdline$NORMAL" -fi - -if [ "$DETECT" = "no" ] - then - DHCP="no" - -fi - -if [ "$DETECT" = "yes" ] - then - NETDEVICES="`awk -F: '/eth.:|tr.:/{print $1}' /proc/net/dev 2>/dev/null`" -fi - -if [ -n "$NETDEVICES" ] - then - ebegin $GOOD"Network device$HILITE$NETDEVICES$GOOD detected,$WARN DHCP broadcasting for IP.$NORMAL" - eend - else - ebegin $BAD"No Network device auto detected.$NORMAL" - -fi - - -if [ -n "$SOUND_FULLNAME" -o -n "$SOUND_DRIVER" ] - then - # Setting micro input to zero to avoid subsonic disaster - ebegin $GOOD"Soundcard:" - eend - aumix -m 0 >/dev/null 2>&1 - aumix -f /etc/aumixrc -L >/dev/null 2>&1 - aumix -v100 -c100 -w100 >/dev/null 2>&1 - [ -n "$SOUND_FULLNAME" ] - ebegin " $WARN$SOUND_FULLNAME" - [ -n "$SOUND_DRIVER" ] - ebegin $WARN" driver = $SOUND_DRIVER"$HILITE -fi - -killall hwsetup 2>/dev/null -test -f /proc/splash && echo "show 65535" > /proc/splash -echo "6" > /proc/sys/kernel/printk -echo off >/proc/splash -clear -} diff --git a/src/livecd/profiles/lw-ut2003/aux-files/bg.png b/src/livecd/profiles/lw-ut2003/aux-files/bg.png Binary files differdeleted file mode 100644 index b695afc50b..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/bg.png +++ /dev/null diff --git a/src/livecd/profiles/lw-ut2003/aux-files/bootsplash-1024x768.cfg b/src/livecd/profiles/lw-ut2003/aux-files/bootsplash-1024x768.cfg deleted file mode 100644 index ca47f2ad2e..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/bootsplash-1024x768.cfg +++ /dev/null @@ -1,56 +0,0 @@ -# This is a bootsplash configuration file for -# theme SuSE, resolution 1024x768. See -# ftp://ftp.suse.com/pub/people/stepan/bootsplash for -# more information. Comments are welcome by stepan@suse.de - -# config file version -version=3 - -# should the picture be displayed? -state=1 - -# fgcolor is the text forground color. -# bgcolor is the text background (i.e. transparent) color. -fgcolor=7 -bgcolor=0 - -# (tx, ty) are the (x, y) coordinates of the text window in pixels. -# tw/th is the width/height of the text window in pixels. -tx=25 -ty=28 -tw=979 -th=649 - -# ttf message output parameters -text_x=312 -text_y=532 -text_size=18 -#text_color=0xeef4ff -text_color=-0x000000 -# name of the picture file (full path recommended) -jpeg=/etc/bootsplash/gentoo/images/bootsplash-1024x768.jpg -silentjpeg=/etc/bootsplash/gentoo/images/silent-1024x768.jpg - -progress_enable=1 - -# background -box silent noover 204 582 820 612 #04045498 -box silent inter 204 583 204 611 #ffffff #ffffff #526bb0 #526bb0 -box silent 204 583 820 611 #ffffff #ffffff #526bb0 #526bb0 -# black border -box silent 204 582 820 582 #313234 -box silent 204 612 820 612 #eef4ff -box silent 204 582 204 612 #313234 -box silent 820 582 820 612 #eef4ff - -# text box (left, top) -box 19 19 19 679 #313234 -box 19 19 1005 19 #313234 -# (right, bottom) -box 1005 19 1005 679 #eef4ff -box 19 679 1005 679 #eef4ff - -# box itself -box noover 20 20 1004 678 #04045498 - -overpaintok=1 diff --git a/src/livecd/profiles/lw-ut2003/aux-files/checkfs b/src/livecd/profiles/lw-ut2003/aux-files/checkfs deleted file mode 100644 index 2bc25d835e..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/checkfs +++ /dev/null @@ -1,78 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw-ut2003/aux-files/Attic/checkfs,v 1.1 2003/10/19 03:46:49 livewire Exp $ - - -depend() { - need checkroot modules -} - -start() { - # LVM support for /usr, /home, /opt .... - # This should be done *before* checking local - # volumes, or they never get checked. - - # NOTE: Add needed modules for LVM or RAID, etc - # to /etc/modules.autoload if needed - - if [ -x /sbin/vgscan -a -d /proc/lvm ] - then - ebegin "Setting up the Logical Volume Manager" - #still echo stderr for debugging - /sbin/vgscan >/dev/null - if [ "$?" -eq 0 ] && [ -x /sbin/vgchange -a -f /etc/lvmtab ] - then - /sbin/vgchange -a y >/dev/null - fi - eend $? "Failed to setup the LVM" - fi - - # Start software raid - if [ -x /sbin/raidstart -a -f /etc/raidtab -a -f /proc/mdstat ] - then - ebegin "Starting software RAID" - ACTIVE_RAID="`grep -E "md[0-9]+[[:space:]]?: active raid" /proc/mdstat | awk -F ':' '{print $1}'`" - if [ ! -z "${ACTIVE_RAID}" ] - then - for x in $(grep -E "raiddev /dev/md[0-9]+" /etc/raidtab | \ - awk '{print $2}' | grep -v "`echo ${ACTIVE_RAID} | sed s'/[[:space:]]//g'`") - do - /sbin/raidstart /dev/${x} - done - else - /sbin/raidstart --all - fi - eend $? "Failed to start software RAID" - fi - - if [ -f /fastboot ] - then - rm -f /fastboot - else - ebegin "Checking all filesystems" - if [ -f /forcefsck ] - then - ewarn "A full fsck has been forced" - fsck -C -R -A -a -f - rm -f /forcefsck - else - fsck -R -A -a >/dev/null 2>&1 - fi - if [ "$?" -eq 0 ] - then - eend 0 - elif [ "$?" -eq 1 ] - then - ewend 1 "Filesystem errors corrected." - #everything should be ok, so return a pass - return 0 - else - eend 2 "Fsck could not correct all errors, manual repair needed" - /sbin/sulogin ${CONSOLE} - fi - fi -} - - -# vim:ts=4 diff --git a/src/livecd/profiles/lw-ut2003/aux-files/checkroot b/src/livecd/profiles/lw-ut2003/aux-files/checkroot deleted file mode 100644 index 4dc70dcbb2..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/checkroot +++ /dev/null @@ -1,87 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw-ut2003/aux-files/Attic/checkroot,v 1.1 2003/10/19 03:46:49 livewire Exp $ - - -depend() { - before * -} - -start() { - if [ ! -f /fastboot ] - then - ebegin "Remounting root filesystem read-only (if necessary)" - mount / -n -o remount,ro &>/dev/null - eend $? - - ebegin "Checking root filesystem" - if [ -f /forcefsck ] - then - ewarn "A full fsck has been forced" - ewarn "Skipping fsck; this is a livecd" -# fsck -C -f -a / - # /forcefsck isn't deleted because checkfs needs it. - # it'll be deleted in that script. - fi - if [ "$?" -eq 0 ] - then - eend 0 - elif [ "$?" -eq 1 ] - then - ewend 1 "Filesystem repaired" - else - eend 2 "Filesystem couldn't be fixed :(" - /sbin/sulogin ${CONSOLE} - /sbin/reboot -f - fi - fi - - ebegin "Remounting root filesystem read/write" - mount / -n -o remount,rw &>/dev/null - if [ "$?" -ne 0 ] - then - eend 2 "Root filesystem could not be mounted R/W :(" - /sbin/sulogin ${CONSOLE} - else - eend 0 - fi - - if [ "${BOOT}" = "yes" ] - then - # create /etc/mtab (done by forcing current mounted filesystems) - # NB: this needs to be updated if our /sbin/rc mounts change ... - > /etc/mtab - mount -f -o rw / &> /dev/null - mount -f /proc &> /dev/null - - # Remove stale backups - rm -f /etc/mtab~ /etc/mtab~~ - - # should /dev be mounted ? - if ! get_bootparam "nodevfs" && [ -e /dev/.devfsd ] - then - mount -f -t devfs none /dev &> /dev/null - fi - - # should we mount a ramdisk or tmpfs? - if ! get_bootparam "notmpfs" - then - # using tmpfs - mount -f -t tmpfs tmpfs ${svcdir} \ - -o rw,mode=0644,size=${svcsize}k &> /dev/null - else - # using a ramdisk - mount -f -t ext2 /dev/ram0 ${svcdir} -o rw &> /dev/null - fi - - if ! get_bootparam "notmpfs" && get_bootparam "ngpt" - then - # POSIX shared memory support - mount -f /dev/shm &> /dev/null - fi - fi -} - - -# vim:ts=4 diff --git a/src/livecd/profiles/lw-ut2003/aux-files/depscan.sh b/src/livecd/profiles/lw-ut2003/aux-files/depscan.sh deleted file mode 100644 index d9562f9d3c..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/depscan.sh +++ /dev/null @@ -1,41 +0,0 @@ -#!/bin/bash -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# Author: Martin Schlemmer <azarah@gentoo.org> -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw-ut2003/aux-files/Attic/depscan.sh,v 1.1 2003/10/19 03:46:49 livewire Exp $ - -source /etc/init.d/functions.sh - -ebegin "Caching service dependencies" - - -lookbusy() { - local type - type=${1}; shift - for i in "$@" - do echo -n $GOOD" * Loading Services" $i;echo -n -e "\r"; - usleep 600000 ; -done -echo $WARN" * Loading Services 100%" -echo -n $NORMAL -} - -lookbusy '10%' '20%' '30%' '40%' '50%' '60%' '70%' '80%' '90%' '100%' - -/bin/gawk -v SVCDIR="${svcdir}" \ - -f /lib/rcscripts/awk/functions.awk \ - -f /lib/rcscripts/awk/cachedepends.awk - -cd /etc/init.d - -bash ${svcdir}/depcache | \ - /bin/gawk -v SVCDIR="${svcdir}" \ - -v DEPTYPES="${deptypes}" \ - -v ORDTYPES="${ordtypes}" \ - -f /lib/rcscripts/awk/functions.awk \ - -f /lib/rcscripts/awk/gendepends.awk - -eend $? "Failed to cache service dependencies" - - -# vim:ts=4 diff --git a/src/livecd/profiles/lw-ut2003/aux-files/fbresolution b/src/livecd/profiles/lw-ut2003/aux-files/fbresolution Binary files differdeleted file mode 100644 index cc077dab18..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/fbresolution +++ /dev/null diff --git a/src/livecd/profiles/lw-ut2003/aux-files/fbtruetype.static b/src/livecd/profiles/lw-ut2003/aux-files/fbtruetype.static Binary files differdeleted file mode 100644 index c2b9654f9e..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/fbtruetype.static +++ /dev/null diff --git a/src/livecd/profiles/lw-ut2003/aux-files/fluxbox.tar.bz2 b/src/livecd/profiles/lw-ut2003/aux-files/fluxbox.tar.bz2 Binary files differdeleted file mode 100644 index d26bee9f78..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/fluxbox.tar.bz2 +++ /dev/null diff --git a/src/livecd/profiles/lw-ut2003/aux-files/freeramdisk.c b/src/livecd/profiles/lw-ut2003/aux-files/freeramdisk.c deleted file mode 100644 index da82fba115..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/freeramdisk.c +++ /dev/null @@ -1,32 +0,0 @@ -#include <stdio.h> -#include <string.h> -#include <sys/mount.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <fcntl.h> -#include <sys/ioctl.h> -#include <errno.h> - -main(int argc, char **argv) -{ - char rname[256]="/dev/ram"; - char b[256]; - int f; - if (argv[1]) strcpy(rname,argv[1]); - -#if 0 /* don't use on a living system, /etc/mtab is not updated */ - if (umount(rname) && (errno != ENOENT)) { - sprintf(b,"freeramdisk: cannot umount %s %d",rname,errno); - perror(b); - exit(1); - } -#endif - - if ((f=open(rname,O_RDWR)) == -1) { - sprintf(b,"freeramdisk: cannot open %s",rname); - perror(b); - exit(1); - } - ioctl(f,BLKFLSBUF); - close(f); -} diff --git a/src/livecd/profiles/lw-ut2003/aux-files/fstab b/src/livecd/profiles/lw-ut2003/aux-files/fstab deleted file mode 100644 index 964e1c7506..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/fstab +++ /dev/null @@ -1,8 +0,0 @@ -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw-ut2003/aux-files/Attic/fstab,v 1.1 2003/10/19 03:46:49 livewire Exp $ - -# /etc/fstab: static file system information. -proc /proc proc defaults 0 0 -tmpfs /dev/shm tmpfs defaults 0 0 -tmpfs /lib/dev-state tmpfs defaults 0 0 diff --git a/src/livecd/profiles/lw-ut2003/aux-files/functions.sh b/src/livecd/profiles/lw-ut2003/aux-files/functions.sh deleted file mode 100644 index c227af1637..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/functions.sh +++ /dev/null @@ -1,568 +0,0 @@ -# Copyright 1999-2003 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw-ut2003/aux-files/Attic/functions.sh,v 1.1 2003/10/19 03:46:49 livewire Exp $ - -umask 022 - -if [ -z "${EBUILD}" ] -then - # Setup a basic $PATH. Just add system default to existing. - # This should solve both /sbin and /usr/sbin not present when - # doing 'su -c foo', or for something like: PATH= rcscript start - PATH="/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/sbin:${PATH}" -fi - -# daemontools dir -SVCDIR="/var/lib/supervise" - -# Check /etc/conf.d/rc for a description of these ... -svcdir="/var/lib/init.d" -svcmount="no" -svcfstype="tmpfs" -svcsize=1024 -shmdir="/mnt/.shm" - -# Different types of dependencies -deptypes="need use" -# Different types of order deps -ordtypes="before after" - -# -# Internal variables -# - -# Dont output to stdout? -RC_QUIET_STDOUT="no" - -# Should we use color? -RC_NOCOLOR="no" - -# -# Default values for rc system -# -RC_NET_STRICT_CHECKING="no" - -# Override defaults with user settings ... -[ -f /etc/conf.d/rc ] && source /etc/conf.d/rc - - -getcols() { - echo "$2" -} - -# Should we use colors ? -if [ -n "${EBUILD}" ] && [ "${*/depend}" = "$*" ] -then - # Check user pref in portage - RC_NOCOLOR="`python -c 'import portage; print portage.settings["NOCOLOR"]' 2> /dev/null`" - -elif [ -n "${EBUILD}" ] && [ "${*/depend}" != "$*" ] -then - # We do not want colors or stty to run during emerge depend - RC_NOCOLOR="yes" - -elif [ "`/bin/consoletype 2> /dev/null`" = "serial" ] -then - # We do not want colors on serial terminals - RC_NOCOLOR="yes" -else - # Lastly check if the user disabled it with --nocolor argument - for arg in $* - do - case "${arg}" in - --nocolor) - RC_NOCOLOR="yes" - ;; - esac - done -fi - -if [ "${RC_NOCOLOR}" = "yes" ] -then - COLS="25 80" - ENDCOL= - - if [ -n "${EBUILD}" ] && [ "${*/depend}" = "$*" ] - then - stty cols 80 &>/dev/null - stty rows 25 &>/dev/null - fi -else - COLS="`stty size 2> /dev/null`" - COLS="`getcols ${COLS}`" - COLS=$((${COLS} - 7)) - ENDCOL=$'\e[A\e['${COLS}'G' # Now, ${ENDCOL} will move us to the end of the - # column; irregardless of character width -fi - -if [ "${RC_NOCOLOR}" = "yes" ] -then - GOOD="" - WARN="" - BAD="" - NORMAL="" - - HILITE="" - BRACKET="" -else - GOOD=$'\e[32;01m' - WARN=$'\e[33;01m' - BAD=$'\e[31;01m' - NORMAL=$'\e[0m' - - HILITE=$'\e[36;01m' - BRACKET=$'\e[34;01m' -fi - -# void esyslog(char* priority, char* tag, char* message) -# -# use the system logger to log a message -# -esyslog() { - if [ -x /usr/bin/logger ] - then - pri="$1" - tag="$2" - - shift 2 - [ -z "$*" ] && return 0 - - /usr/bin/logger -p "${pri}" -t "${tag}" -- "$*" - fi -} - -# void einfo(char* message) -# -# show an informative message (with a newline) -# -einfo() { - if [ "${RC_QUIET_STDOUT}" = "yes" ] - then - return - else - echo -e " ${GOOD}*${NORMAL} ${*}" - fi -} - -# void einfon(char* message) -# -# show an informative message (without a newline) -# -einfon() { - if [ "${RC_QUIET_STDOUT}" = "yes" ] - then - return - else - echo -ne " ${GOOD}*${NORMAL} ${*}" - fi -} - -# void ewarn(char* message) -# -# show a warning message + log it -# -ewarn() { - if [ "${RC_QUIET_STDOUT}" = "yes" ] - then - echo " ${*}" - else - echo -e " ${WARN}*${NORMAL} ${*}" - fi - - # Log warnings to system log - esyslog "daemon.warning" "rc-scripts" "${*}" -} - -# void eerror(char* message) -# -# show an error message + log it -# -eerror() { - if [ "${RC_QUIET_STDOUT}" = "yes" ] - then - echo " ${*}" >/dev/stderr - else - echo -e " ${BAD}*${NORMAL} ${*}" - fi - - # Log errors to system log - esyslog "daemon.err" "rc-scripts" "${*}" -} - -# void ebegin(char* message) -# -# show a message indicating the start of a process -# -ebegin() { - if [ "${RC_QUIET_STDOUT}" = "yes" ] - then - return - else - if [ "${RC_NOCOLOR}" = "yes" ] - then - echo -ne " ${GOOD}*${NORMAL} ${*}..." - else - echo -e " ${GOOD}*${NORMAL} ${*}..." - fi - fi -} - -# void eend(int error, char* errstr) -# -# indicate the completion of process -# if error, show errstr via eerror -# -eend() { - if [ "$#" -eq 0 ] || ([ -n "$1" ] && [ "$1" -eq 0 ]) - then - if [ "${RC_QUIET_STDOUT}" != "yes" ] - then - echo -e "${ENDCOL} ${BRACKET}[ ${GOOD}ok${BRACKET} ]${NORMAL}" - fi - else - local retval="$1" - if [ "$#" -ge 2 ] - then - shift - eerror "${*}" - fi - if [ "${RC_QUIET_STDOUT}" != "yes" ] - then - echo -e "${ENDCOL} ${BRACKET}[ ${BAD}!!${BRACKET} ]${NORMAL}" - # extra spacing makes it easier to read - echo - fi - return ${retval} - fi -} - -# void ewend(int error, char *warnstr) -# -# indicate the completion of process -# if error, show warnstr via ewarn -# -ewend() { - if [ "$#" -eq 0 ] || ([ -n "$1" ] && [ "$1" -eq 0 ]) - then - if [ "${RC_QUIET_STDOUT}" != "yes" ] - then - echo -e "${ENDCOL} ${BRACKET}[ ${GOOD}ok${BRACKET} ]${NORMAL}" - fi - else - local retval="$1" - if [ "$#" -ge 2 ] - then - shift - ewarn "${*}" - fi - if [ "${RC_QUIET_STDOUT}" != "yes" ] - then - echo -e "${ENDCOL} ${BRACKET}[ ${WARN}!!${BRACKET} ]${NORMAL}" - # extra spacing makes it easier to read - echo - fi - return "${retval}" - fi -} - -# bool wrap_rcscript(full_path_and_name_of_rc-script) -# -# check to see if a given rc-script has syntax errors -# zero == no errors -# nonzero == errors -# -wrap_rcscript() { - local retval=1 - - ( echo "function test_script() {" ; cat "$1"; echo "}" ) > "${svcdir}/foo.sh" - - if source "${svcdir}/foo.sh" &> /dev/null - then - test_script &> /dev/null - retval=0 - fi - rm -f "${svcdir}/foo.sh" - return "${retval}" -} - -# int checkserver(void) -# -# Return 0 (no error) if this script is executed -# onto the server, one otherwise. -# See the boot section of /sbin/rc for more details. -# -checkserver() { - # Only do check if 'gentoo=adelie' is given as kernel param - if get_bootparam "adelie" - then - [ "`cat ${svcdir}/hostname`" = "(none)" ] || return 1 - fi - - return 0 -} - -# void init_node(void) -# -# Initialize an Adelie node. -# -init_node() { - ebegin "Importing local userspace on node" - - try mount -t tmpfs none "${shmdir}" - - for DIR in /etc /var /root - do - - if grep -q -v "^${DIR}[[:space:]]" /etc/exports - then - mount -o nolock -n server:"${DIR}" "${DIR}" - fi - - if [ -e "/etc/conf.d/exclude/${DIR}" ] - then - find "${DIR}/" -type d | grep -v -f "/etc/conf.d/exclude/${DIR}" \ - > "${shmdir}/${DIR}.lst" - else - find "${DIR}/" -type d > "${shmdir}/${DIR}.lst" - fi - - for SUBDIR in `cat ${shmdir}/${DIR}.lst` - do - mkdir -p "${shmdir}/${SUBDIR}" - chmod --reference="${SUBDIR}" "${shmdir}/${SUBDIR}" - cp -dp "${SUBDIR}"/* "${shmdir}/${SUBDIR}" &> /dev/null - done - - if [ -e "/etc/conf.d/exclude/${DIR}" ] - then - for EMPTYDIR in `cat "/etc/conf.d/exclude/${DIR}"` - do - mkdir -p "${shmdir}/${EMPTYDIR}" - chmod --reference="${SUBDIR}" "${shmdir}/${SUBDIR}" - done - fi - - umount -n "${DIR}" > /dev/null - mount -n -o bind "${shmdir}/${DIR}" "${DIR}" - done - - mkdir -p "${shmdir}/tmp" - chmod 0777 "${shmdir}/tmp" - mount -n -o bind "${shmdir}/tmp" /tmp - - cat /proc/mounts > /etc/mtab - - cp -f /etc/inittab.node /etc/inittab - [ -e /etc/fstab.node ] && cp -f /etc/fstab.node /etc/fstab - killall -1 init - - eend 0 -} - -# char *KV_major(string) -# -# Return the Major version part of given kernel version. -# -KV_major() { - [ -z "$1" ] && return 1 - - local KV="`echo $1 | \ - awk '{ tmp = $0; gsub(/^[0-9\.]*/, "", tmp); sub(tmp, ""); print }'`" - echo "${KV}" | awk -- 'BEGIN { FS = "." } { print $1 }' -} - -# char *KV_minor(string) -# -# Return the Minor version part of given kernel version. -# -KV_minor() { - [ -z "$1" ] && return 1 - - local KV="`echo $1 | \ - awk '{ tmp = $0; gsub(/^[0-9\.]*/, "", tmp); sub(tmp, ""); print }'`" - echo "${KV}" | awk -- 'BEGIN { FS = "." } { print $2 }' -} - -# char *KV_micro(string) -# -# Return the Micro version part of given kernel version. -# -KV_micro() { - [ -z "$1" ] && return 1 - - local KV="`echo $1 | \ - awk '{ tmp = $0; gsub(/^[0-9\.]*/, "", tmp); sub(tmp, ""); print }'`" - echo "${KV}" | awk -- 'BEGIN { FS = "." } { print $3 }' -} - -# int KV_to_int(string) -# -# Convert a string type kernel version (2.4.0) to an int (132096) -# for easy compairing or versions ... -# -KV_to_int() { - [ -z "$1" ] && return 1 - - local KV_MAJOR="`KV_major "$1"`" - local KV_MINOR="`KV_minor "$1"`" - local KV_MICRO="`KV_micro "$1"`" - local KV_int="$((KV_MAJOR * 65536 + KV_MINOR * 256 + KV_MICRO))" - - # We make version 2.2.0 the minimum version we will handle as - # a sanity check ... if its less, we fail ... - if [ "${KV_int}" -ge 131584 ] - then - echo "${KV_int}" - - return 0 - else - return 1 - fi -} - -# int get_KV() -# -# return the kernel version (major, minor and micro concated) as an integer -# -get_KV() { - local KV="`uname -r 2> /dev/null`" - - echo "`KV_to_int ${KV}`" - - return $? -} - -# bool get_bootparam(param) -# -# return 0 if gentoo=param was passed to the kernel -# -# EXAMPLE: if get_bootparam "nodevfs" ; then .... -# -get_bootparam() { - local copt="" - local parms="" - local retval=1 - - for copt in `cat /proc/cmdline` - do - if [ "${copt%=*}" = "gentoo" ] - then - params="`gawk -v PARAMS="${copt##*=}" ' - BEGIN { - split(PARAMS, nodes, ",") - for (x in nodes) - print nodes[x] - }'`" - - # Parse gentoo option - for x in ${params} - do - if [ "${x}" = "$1" ] - then - echo YES - retval=0 - fi - done - fi - done - return ${retval} -} - -# Safer way to list the contents of a directory, -# as it do not have the "empty dir bug". -# -# char *dolisting(param) -# -# print a list of the directory contents -# -# NOTE: quote the params if they contain globs. -# also, error checking is not that extensive ... -# -dolisting() { - local x="" - local y="" - local tmpstr="" - local mylist="" - local mypath="${*}" - - if [ "${mypath%/\*}" != "${mypath}" ] - then - mypath="${mypath%/\*}" - fi - for x in ${mypath} - do - if [ ! -e ${x} ] - then - continue - fi - if [ ! -d ${x} ] && ( [ -L ${x} -o -f ${x} ] ) - then - mylist="${mylist} `ls ${x} 2> /dev/null`" - else - if [ "${x%/}" != "${x}" ] - then - x="${x%/}" - fi - cd ${x} - tmpstr="`ls`" - for y in ${tmpstr} - do - mylist="${mylist} ${x}/${y}" - done - fi - done - echo "${mylist}" -} - -# void save_options(char *option, char *optstring) -# -# save the settings ("optstring") for "option" -# -save_options() { - local myopts="$1" - shift - if [ ! -d ${svcdir}/options/${myservice} ] - then - install -d -m0755 ${svcdir}/options/${myservice} - fi - echo "$*" > ${svcdir}/options/${myservice}/${myopts} -} - -# char *get_options(char *option) -# -# get the "optstring" for "option" that was saved -# by calling the save_options function -# -get_options() { - if [ -f ${svcdir}/options/${myservice}/$1 ] - then - cat ${svcdir}/options/${myservice}/$1 - fi -} - -# Prelim code to add bootsplash support to Gentoo :) -rc_splash() { - test -f /proc/splash || return 0 - if [ -n "`grep 'splash=silent' /proc/cmdline 2>/dev/null`" ]; then - /sbin/splash "$1" - export progress=$(( ${progress} + 1 )) - fi -} - -# Allows us to save variable info between runlevels (ie. rc iterations) -save_splash_info() { - if [ -f /proc/splash ]; then - echo ${sscripts} > ${svcdir}/sscripts.tmp - echo ${progress} > ${svcdir}/progress.tmp - fi -} - -# Retrieve splash state info -get_splash_info() { - if [ -f /proc/splash ]; then - export sscripts=`cat ${svcdir}/sscripts.tmp` - export progress=`cat ${svcdir}/progress.tmp` - fi -} - -# vim:ts=4 diff --git a/src/livecd/profiles/lw-ut2003/aux-files/hosts b/src/livecd/profiles/lw-ut2003/aux-files/hosts deleted file mode 100644 index 4da3032548..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/hosts +++ /dev/null @@ -1,11 +0,0 @@ -# -# hosts This file describes a number of hostname-to-address -# mappings for the TCP/IP subsystem. It is mostly -# used at boot time, when no name servers are running. -# On small systems, this file can be used instead of a -# "named" name server. Just add the names, addresses -# and any aliases to this file... -# - -127.0.0.1 localhost -192.168.1.2 cdimage diff --git a/src/livecd/profiles/lw-ut2003/aux-files/hotplug b/src/livecd/profiles/lw-ut2003/aux-files/hotplug deleted file mode 100644 index dddcfb0084..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/hotplug +++ /dev/null @@ -1,54 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2003 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# /space/gentoo/cvsroot/gentoo-x86/sys-apps/hotplug/files/hotplug.rc,v 1.2 2002/02/25 23:02:14 woodchip Exp - -HILITE="\033[1m" -NORMAL="\033[0m" - -depend() { - need modules -} - -checkconfig() { - if [ ! -d /etc/hotplug ] ; then - eerror "Hotplug requires scripts & configs in /etc/hotplug!" - return 1 - fi -} - -start() { - CMDLINE="`cat /proc/cmdline`" - for x in $CMDLINE - do - if [ "$x" = "nodetect" ] - then - ebegin "Skipping USB and PCI hotplugging (nodetect option)" - return 0 - elif [ "$x" = "nohotplug" ] - then - ebegin "Skipping USB and PCI hotplugging (nohotplug option)" - return 0 - fi - done - local error - checkconfig || return 1 - ebegin "Starting USB and PCI hotplugging" - echo "0" > /proc/sys/kernel/printk - for RC in /etc/hotplug/*.rc - do - $RC start > /dev/null 2>&1 - done - echo "6" > /proc/sys/kernel/printk - eend -} - -stop() { - local error - ebegin "Stopping USB and PCI hotplugging" - for RC in /etc/hotplug/*.rc - do - $RC stop - done - eend -} diff --git a/src/livecd/profiles/lw-ut2003/aux-files/hwsetup b/src/livecd/profiles/lw-ut2003/aux-files/hwsetup deleted file mode 100644 index 58c907ec17..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/hwsetup +++ /dev/null @@ -1,49 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw-ut2003/aux-files/Attic/hwsetup,v 1.1 2003/10/19 03:46:49 livewire Exp $ - -HILITE="\033[1m" -NORMAL="\033[0m" - -DETECT="yes" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "nodetect" ] - then - DETECT="no" - fi -done - -depend() { - after checkfs - after local -} - -blurb() { - echo -ne ${HILITE}${1} - #blurblen=${#1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} -start() { - ebegin "Hardware detection" - -if [ "$DETECT" = "yes" ] - then - # Disable kernel messages to console: - echo "0" > /proc/sys/kernel/printk - /etc/init.d/autoconfig - eend - fi - -} - -stop() { - return -} - -# vim:ts=4 diff --git a/src/livecd/profiles/lw-ut2003/aux-files/inittab b/src/livecd/profiles/lw-ut2003/aux-files/inittab deleted file mode 100644 index 48b8e0f445..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/inittab +++ /dev/null @@ -1,47 +0,0 @@ -# -# inittab This file describes how the INIT process should set up -# the system in a certain run-level. -# -# Author: Miquel van Smoorenburg, <miquels@cistron.nl> -# Modified by: Patrick J. Volkerding, <volkerdi@ftp.cdrom.com> -# Modified by: Daniel Robbins, <drobbins@gentoo.org> -# -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw-ut2003/aux-files/Attic/inittab,v 1.1 2003/10/19 03:46:49 livewire Exp $ - -# -# Default runlevel. - -id:3:initdefault: - -# System initialization (runs when system boots). -#DE:S12345:respawn:/sbin/devfsd /dev -fg -# Script to run when going single user (runlevel 1). -~~:S:wait:/sbin/sulogin - -si:S:sysinit:/sbin/rc sysinit -l0:0:wait:/sbin/rc shutdown -l1:1:wait:/sbin/rc single -l2:2:wait:/sbin/rc nonetwork -l3:3:wait:/sbin/rc default -l4:4:wait:/sbin/rc default -l5:5:wait:/sbin/rc default -l6:6:wait:/sbin/rc reboot -z6:6:respawn:/sbin/sulogin - -# TERMINALS -c1:12345:respawn:/sbin/mingetty --noclear --autologin root tty1 -#c2:12345:respawn:/sbin/mingetty --noclear --autologin root tty2 -#c3:12345:respawn:/sbin/mingetty --noclear --autologin root tty3 -#c4:12345:respawn:/sbin/mingetty --noclear --autologin root tty4 - -# What to do at the "Three Finger Salute". -ca:12345:ctrlaltdel:/sbin/shutdown -r now - -# Used by /etc/init.d/xdm to control DM startup. -# Read the comments in /etc/init.d/xdm for more -# info. Do NOT remove, as this will start nothing -# extra at boot if /etc/init.d/xdm is not added -# to the "default" runlevel. -x:a:once:/etc/X11/startDM.sh - -# End of /etc/inittab diff --git a/src/livecd/profiles/lw-ut2003/aux-files/install.txt b/src/livecd/profiles/lw-ut2003/aux-files/install.txt deleted file mode 100644 index c6df3c24af..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/install.txt +++ /dev/null @@ -1,1482 +0,0 @@ - - Gentoo Linux 1.4_rc2 and 1.4_rc3 Installation Instructions - Contents: - [1. About the Install................................................. - .................] - - 1.About the Install - - This new boot CD will boot from nearly any modern IDE CD-ROM drive, as - well as many SCSI CD-ROM, assuming that your CD-ROM and BIOS both - support booting. Included on the CD-ROM is Linux support for IDE (and - PCI IDE) (built-in to the kernel) as well as support for all SCSI - devices (available as modules.) In addition, we provide modules for - literally every kind of network card that Linux supports, as well as - tools to allow you to configure your network and establish outbound - (as well as inbound) ssh connections and download files. - - To install from the build CD, you will need to have a 486+ processor - and ideally at least 64 Megabytes of RAM. (Gentoo Linux has been - successfully built with 64MB of RAM + 64MB of swap space, but the - build process is awfully slow under those conditions.) - - Gentoo Linux can be installed using one of three "stage" tarball - files. The one you choose depends on how much of the system you want - to compile yourself. The stage1 tarball is used when one wants to - bootstrap and build the entire system from scratch. The stage2 tarball - is used for building the entire system from scratch, except for the - bootstrap part which is already performed for you. And the stage3 - tarball already contains a basic Gentoo Linux system that has been - optimized for your system. - - So, how does one begin the install process? First, you'll want to - decide which one of our LiveCD ISO images to grab from - [3]http://www.ibiblio.org/gentoo/releases/1.4_rc2/x86/. In this - directory, you'll see several subdirectories such as athlon for each - of our various architecture-specific builds. Here's a low-down on each - arch directory and what it contains: - Architecture Description - x86 Stage 1 tarballs and "gentoo-basic" liveCD -- will work on - anything. - i586 Stage 2 and 3 tarballs, GRP packages and liveCD for i586+ CPUs - i686 Stage 2 and 3 tarballs, GRP packages and liveCD for i686+ CPUs - athlon Stage 2 and 3 tarballs, GRP packages and liveCD for AMD Athlon - CPUs - athlon-xp Stage 2 and 3 tarballs, GRP packages and liveCD for AMD - Athlon XP CPUs - athlon-mp Stage 2 and 3 tarballs, GRP packages and liveCD for AMD - Athlon MP CPUs - pentium3 Stage 2 and 3 tarballs, GRP packages and liveCD for Intel - Pentium III and Pentium 4 CPUs - - Inside each of these directories, you'll find a livecd/ directory that - contains LiveCDs. While these LiveCDs will boot on any architecture, - the install-related tarballs are optimized for a particular CPU type - and will not work on all systems, except for the "gentoo-basic" LiveCD - in the x86 directory which can be used to install on anything. - - The LiveCDs are full CD images that should be burned to a CDR or CD-RW - using CD burning software. Currently, we have two types of LiveCDs. - The first carries the "gentoo-basic" label, and is approximately 40MB - in size and lives in the x86/livecd/ directory. This LiveCD is of - minimal size to allow for a initial quick download and contains a - stage1 tarball that can be found in /mnt/cdrom/gentoo/ after the CD - has booted. - - The second flavor of LiveCD we currently offer is labelled - "livecd-grp." These CDs (found in their respective arch/livecd - directories) contain stage1, 2 and 3 tarballs, and also contain a set - of GRP packages optimized for a specific architecture. GRP is simply - precompiled packages for very large applications, such as XFree86. - KDE, GNOME, OpenOffice, etc. Using these LiveCDs, it will be possible - for you to install a fully-functional Gentoo Linux system very - quickly. The downside is that these ISO images are large -- around - 600MB -- so they can take a while to download. - If for some reason your install gets interrupted at some point, you - can reboot and restart. For example, if you have partitioned, - installed the stageX tarball, and are ready to chroot, you can restart - the install if necessary. Just re-boot with the LiveCD, then mount - your drives/partitions to /mnt as normal. Basically, you can do this - at about any point during the install, just not before partitioning - for obvious reasons. - - Warning: If you encounter a problem with any part of the install and - wish to report it as a bug, report it to [4]http://bugs.gentoo.org. If - the bug needs to be moved upstream to the package maintainers (ie KDE) - the developers will take care of that. - - Now, let's quickly review the install process. First, we'll download, - burn and boot a LiveCD. After getting a root prompt, we'll create - partitions, create our filesystems, and extract either a stage1, - stage2 or stage3 tarball. If we are using a stage1 or stage2 tarball, - we will take the appropriate steps to get our systems to stage3. Once - our systems are at stage3, we can configure them (tweaking config - files, installing a bootloader, etc) and boot them and have a - fully-functional Gentoo Linux system. Depending on what stage of the - build process you're starting from, here's what's required for - installation: - stage tarball requirements for installation - 1 partition/filesystem setup, emerge sync, bootstrap, emerge system, - emerge linux sources, final configuration - 2 partition/filesystem setup, emerge sync, emerge system, emerge linux - sources, final configuration - 3 partition/filesystem setup, emerge sync, final configuration - - 2.Booting - - Start by booting the LiveCD. If detected properly, you should see a - fancy boot screen with the Gentoo Linux logo on it. At this screen, - you can hit Enter to begin the boot process, hit F2 for help, or pass - kernel boot options by typing gentoo opt1 opt2, etc. Once you hit - Enter, you'll be greeted with a lot of text output followed by the - normal Gentoo Linux boot sequence. You will be automatically logged in - as "root" and the root password will be set to a random string for - security purposes. You should have a root ("#") prompt on the current - console, and can also open new root consoles by pressing Alt-F2, - Alt-F3 and Alt-F4. Get back to the one you started on by pressing (you - guessed it) Alt-F1. - - You've probably also noticed that above your # prompt is a bunch of - help text explaining how to do things like configure your network - devices and where you can find the Gentoo Linux stage tarballs and - packages on your CD. - - 3.Load Kernel Modules - - If the PCI autodetection missed some of your hardware, you will have - to load the appropriate modules manually. To view a list of all - available network card modules, type ls - /lib/modules/*/kernel/drivers/net/*. To load a particular module, - type: - - Code listing 3.1: PCI Modules Configuration -# modprobe pcnet32 -(replace pcnet32 with your NIC module) - - Now, if you want to be able to access any SCSI hardware that wasn't - detected during the initial boot autodetection process, you'll need to - load the appropriate modules from /lib/modules, again using modprobe: - - Code listing 3.2: Loading SCSI Modules -# modprobe aic7xxx -# modprobe sd_mod - - aic7xxx supports your SCSI controller and sd_mod supports SCSI hard - disks. - - Note: Support for a SCSI CD-ROMs and disks are built-in in the kernel. - - If you are using hardware RAID, you'll need to load the ATA-RAID - modules for your RAID controller. - - Code listing 3.3: Loading RAID Modules - -# modprobe ataraid -# modprobe pdcraid - (Promise Raid Controller) -# modprobe hptraid - (Highpoint Raid Controller) - - The Gentoo LiveCD should have enabled DMA on your disks, but if it did - not, hdparm can be used to set DMA on your drives. - - Code listing 3.4: Setting DMA -Replace hdX with your disk device. -# hdparm -d 1 /dev/hdX Enables DMA -# hdparm -d1 -A1 -m16 -u1 -a64 /dev/hdX Enables DMA and other safe performance- -enhancing options -# hdparm -X66 /dev/hdX Force-enables Ultra-DMA -- dangerous -- may cause some d -rives to mess up - - 4.Loading PCMCIA Kernel Modules - - If you have a PCMCIA network card, you will need to do some additional - trickery. - - Warning: To avoid problems with cardmgr, you must run it before you - enter the chroot portion of the install. - - Code listing 4.1: Loading PCMCIA Modules -# modprobe pcmcia_core -# modprobe i82365 -# modprobe ds -# cardmgr -f - - As cardmgr detects which hardware is present, your speaker should emit - a few reassuring beeps, and your PCMCIA network card should hum to - life. You can of course insert the PCMCIA card after loading cardmgr - too, if that's preferable. (Technically, you need not run cardmgr if - you know exactly which module your PCMCIA card requires. But if you - don't, loading all PCMCIA modules and see which sticks won't work, as - all PCMCIA modules load obligingly and hang around for a PCMCIA card - to drop by. cardmgr will also unload the module(s) for any card when - you remove it). - - 5.Configuring Networking - - PPPoE configuration - - Assuming you need PPPoE to connect to the internet, the livecd (any - version) has made things easy for you by including rp-pppoe. Use the - provided adsl-setup script to configure your connection. You will be - prompted for the ethernet device that is connected to your adsl modem, - your username and password, the IPs of your DNS servers, and if you - need a basic firewall or not. - - Code listing 5.1: Configuring PPPoE -# adsl-setup -# adsl-start - - If something goes wrong, double-check that you correctly typed your - username and password by looking at /etc/ppp/pap-secrets or - /etc/ppp/chap-secrets, and make sure you are using the right ethernet - device. - - Automatic Network Configuration - - The Gentoo Linux install lets you configure a working network, - allowing you to use ssh, scp, lynx, irssi or wget as needed before - even beginning the installation process. Even if you don't need to do - these things now, you should go ahead and set up networking now. Once - networking is up, Portage will be able to use your configured network - once you are inside the chroot environment (required for installing - Gentoo Linux). The simplest way to set up networking is to run our new - net-setup script. - - Code listing 5.2: Net-Setup Script - # net-setup eth0 - - Of course, if you prefer, you may still set up networking manually. - - Manual DHCP Configuration - - Network configuration is simple with DHCP; If your ISP is not using - DHCP, skip down to the static configuration section below. - - Code listing 5.3: Network configuration with DHCP - # dhcpcd eth0 - - Note: Some ISPs require you to provide a hostname. To do that, add a - -h myhostname flag to the dhcpcd command line above. - - If you receive dhcpConfig warnings, don't panic; the errors are most - likely cosmetic. Skip down to Network testing below. - - Manual Static Configuration - - We need to setup just enough networking so that we can download - sources for the system build, as well as the required localhost - interface. Type in the following commands, replacing $IFACE with your - network interface (typically eth0), $IPNUM with your IP address, - $BCAST with your broadcast address, and $NMASK with your network mask. - For the route command, replace $GTWAY with your default gateway. - - Code listing 5.4: Static IP Network Configuration -# ifconfig $IFACE $IPNUM broadcast $BCAST netmask $NMASK -# /sbin/route add -net default gw $GTWAY netmask 0.0.0.0 metric 1 - - Now it's time to create the /etc/resolv.conf file so that name - resolution (finding Web/FTP sites by name, rather than just by IP - address) will work. - - Here's a template to follow for creating your /etc/resolv.conf file: - - Code listing 5.5: /etc/resolv.conf template -domain mydomain.com -nameserver 10.0.0.1 -nameserver 10.0.0.2 - - Replace 10.0.0.1 and 10.0.0.2 with the IP addresses of your primary - and secondary DNS servers respectively. - - Proxy Configuration - - If you are behind a proxy, it is necessary to configure your proxy - before you continue. We will export some variables to set up the proxy - accordingly. - - Code listing 5.6: Setting a Proxy -# export http_proxy="machine.company.com:1234" -# export ftp_proxy="$http_proxy" -# export RSYNC_PROXY="$http_proxy" - - Network Testing - - Now that your network has been configured, the /sbin/ifconfig -a - command should show that your network card is working (look for UP and - RUNNING in the output). - - Code listing 5.7: /sbin/ifconfig for a working network card -eth0 Link encap:Ethernet HWaddr 00:50:BA:8F:61:7A - inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0 - inet6 addr: fe80::50:ba8f:617a/10 Scope:Link - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:1498792 errors:0 dropped:0 overruns:0 frame:0 - TX packets:1284980 errors:0 dropped:0 overruns:0 carrier:0 - collisions:1984 txqueuelen:100 - RX bytes:485691215 (463.1 Mb) TX bytes:123951388 (118.2 Mb) - Interrupt:11 - - You may want to also try pinging your ISP's DNS server (found in - /etc/resolv.conf), and a website of choice, just to make sure that - your packets are reaching the net, DNS name resolution is working - correctly, etc. - - Code listing 5.8: Further Network Testing - # ping www.some_website.com - - Networking is go! - - Networking should now be configured and useable. You should be able to - use the included ssh, scp, lynx, irssi and wget commands to connect to - other machines on your LAN or the Internet. - - 6.Partition Configuration - - Now that the kernel can see the network card and disk controllers, - it's time to set up disk partitions for Gentoo Linux. - - Here's a quick overview of the standard Gentoo Linux partition layout. - We're going to create at least three partitions: a swap partition, a - root partition (to hold the bulk of Gentoo Linux), and a special boot - partition. The boot partition is designed to hold the GRUB or LILO - boot loader information as well as your Linux kernel(s). The boot - partition gives us a safe place to store everything related to booting - Linux. During normal day-to-day Gentoo Linux use, your boot partition - should remain unmounted. This prevents your kernel from being made - unavailable to GRUB (due to filesystem corruption) in the event of a - system crash, preventing the chicken-and-egg problem where GRUB can't - read your kernel (since your filesystem isn't consistent) but you - can't bring your filesystem back to a consistent state (since you - can't boot!) - - Now, on to filesystem types. Right now, you have five filesystem - options: XFS, ext2, ext3 (journaling), jfs, and ReiserFS. ext2 is the - tried and true Linux filesystem but doesn't have metadata journaling. - ext3 is the new version of ext2 with both metadata journaling and - ordered data writes, effectively providing data journaling as well. - ReiserFS is a B*-tree based filesystem that has very good small file - performance, and greatly outperforms both ext2 and ext3 when dealing - with small files (files less than 4k), often by a factor of 10x-15x. - ReiserFS also scales extremely well and has metadata journaling. As of - kernel 2.4.18+, ReiserFS is finally rock-solid and highly recommended. - XFS is a filesystem with metadata journaling that is fully supported - under Gentoo Linux's xfs-sources kernel, but is generally not - recommended due to its tendency to lose recently-modified data if your - system locks up or unexpectedly reboots (due to a power failure, for - instance.) Finially, jfs is IBM's own high performance journaling - filesystem. Since it is obscure, we cannot comment either positvely - nor negatively on its stability. - - If you're looking for the most standard filesystem, use ext2. If - you're looking for the most rugged journalled filesystem, use ext3. If - you're looking for a high-performance filesystem with journaling - support, use ReiserFS; both ext3 and ReiserFS are mature and refined. - Here are our basic recommended filesystem sizes and types: - Partition Size Type example device - boot partition, containing kernel(s) and boot information 100 - Megabytes ext2/3 highly recommended (easiest); if ReiserFS then mount - with -o notail /dev/hda1 - swap partition (no longer a 128 Megabyte limit) Generally, unless you - are running a server, swapspace can be pretty flexible. Please consult - the below table for some loose guidelines on swap space. Linux swap - /dev/hda2 - root partition, containing main filesystem (/usr, /home, etc) >=1.5 - Gigabytes ReiserFS, ext3 recommended; ext2 ok /dev/hda3 - Physical RAM Swapspace Size - 0-48MB RAM 048-064MB RAM 064MB-128MB RAM 128-256MB RAM 256-512MB RAM - 720MB 702MB 640MB 256MB - - Before creating filesystems, you may want to initialize the beginning - of your HD using dd. Doing this will ensure that your new filesystem - will not be mis-indentified by Linux's mounting code. This can be done - as follows: - - Code listing 6.1: Initializing first 1024 Sectors of HD -# dd if=/dev/zero of=/dev/hdxy bs=1K count=1 -Replace /dev/hdxy with the device you wish to "clean." - - Warning: The command above will destroy all data from /dev/hdxy. Be - careful and check twice which partition you specify for zeroing. If - you make a mistake it might result in a loss of data. - - At this point, create your partitions using fdisk. Note that your - partitions should be of type 82 if swap and 83 for regular filesystems - (whether ReiserFS, ext2/3 or other). - - Note: cfdisk is included on the install CD, and it is considerably - easier to use than fdisk. Just type cfdisk to run it; by default, - cfdisk will work with /dev/hda. If /dev/hda is not the hard disk you - want to partition, give the right value to cfdisk as a parameter. For - example: cfdisk /dev/hde - - Note: If fdisk or cfdisk instruct you to do so, please reboot to allow - your system to detect the new partition configuration. - - Note: If you are using RAID your partitions will be a little - different. You will have the partitions like this: - /dev/ataraid/discX/partY X is the arrays you have made, so if you only - have made 1 array, then it will be disc0.Y is the partition number as - in /dev/hdaY - - Once you've created your partitions, it's time to initialize the - filesystems that will be used to house our data. Initialize swap as - follows: - - Code listing 6.2: Initializing Swap - # mkswap /dev/hda2 - - You can use the mke2fs command to create ext2 filesystems. - - Code listing 6.3: Creating an ext2 Filesystem - # mke2fs /dev/hda1 - - To create an XFS filesystem, use the mkfs.xfs command. - - Code listing 6.4: Creating a XFS Filesystem - # mkfs.xfs /dev/hda3 - - Note: You may want to add a couple of additional flags to the mkfs.xfs - command: -d agcount=3 -l size=32m. The -d agcount=3 command will lower - the number of allocation groups. XFS will insist on using at least 1 - allocation group per 4 GB of your partition, so, for example, if you - hava a 20 GB partition you will need a minimum agcount of 5. The -l - size=32m command increases the journal size to 32 Mb, increasing - performance. - - Warning: If you are installing an XFS partition over a previous - ReiserFS partition, later attempts to mount may fail without an - explicit mount -t xfs. The solution is to zero out the partition - before creating the XFS filesystem: dd if=/dev/zero of=/dev/hdx bs=1k. - - If you'd like to use ext3, you can create ext3 filesystems using - mke2fs -j. - - Code listing 6.5: Creating an ext3 Filesystem - # mke2fs -j /dev/hda3 - - Note: You can find out more about using ext3 under Linux 2.4 at - [5]http://www.zip.com.au/~akpm/linux/ext3/ext3-usage.html. - - To create ReiserFS filesystems, use the mkreiserfs command. - - Code listing 6.6: Creating a ReiserFS Filesystem - # mkreiserfs /dev/hda3 - - To create JFS filesystems, use the mkfs.jfs comamnd. - - Code listing 6.7: Creating a JFS Filesystem - # mkfs.jfs /dev/hda3 - - 7.Mount Partitions - - Now, we'll activate our new swap, since we may need the additional - virtual memory that provides later: - - Code listing 7.1: Activating Swap - # swapon /dev/hda2 - - Next, we'll create the /mnt/gentoo and /mnt/gentoo/boot mountpoints, - and we'll mount our filesystems to these mountpoints. - - Code listing 7.2: Creating Mount Points -# mkdir /mnt/gentoo -# mount /dev/hda3 /mnt/gentoo -# mkdir /mnt/gentoo/boot -# mount /dev/hda1 /mnt/gentoo/boot - - If you are setting up Gentoo Linux with a separate /usr or /var, these - would get mounted to /mnt/gentoo/usr and /mnt/gentoo/var, - respectively. - - Important: If your boot partition (the one holding the kernel) is - ReiserFS, be sure to mount it with the -o notail option so GRUB gets - properly installed. Make sure that notail ends up in your new - /etc/fstab boot partition entry, too. We'll get to that in a bit. - - Important: If you are having problems mounting your boot partition - with ext2, try using mount /dev/hXX /mnt/gentoo/boot -t ext2 - - 8.Obtaining the Desired 'stage-x' Tarball - - If you are using a GRP CD to install, you already have all of the - stage tarballs available on the CD. If this is the case, copy the - tarball of your choice to /mnt/gentoo - - Alternatively, if you do not have a GRP CD, the stage1 tarball is - still available on the CD in /mnt/cdrom/gentoo. You will have to - download the other stages though, and the best place to download those - to is /mnt/gentoo. - - Code listing 8.1: Downloading Required Stages -# cd /mnt/gentoo -Use lynx to get the URL for your tarball: -# lynx http://www.ibiblio.org/pub/Linux/distributions/gentoo/releases/1.4_rc2/x -86/ -Use Up and Down arrows keys (or the TAB key) to go to the right directory -Highlight the appropriate stage you want to download -Press d which will initiate the download -Save the file and quit the browser - -OR use wget from the command line: -# wget insert URL to the required stage tarball here. - - 9.Unpacking the Stage Tarballs - - Now it's time to extract the compressed stage tarball of your choice - to /mnt/gentoo. Then, we'll chroot over to the new Gentoo Linux build - installation to "enter" the new Gentoo Linux system. - - Important: Be sure to use the p option with tar. Forgetting to do this - will cause certain files to have incorrect permissions. - - If you are using the "from scratch, build everything" install method, - you will want to use the stage1-ix86-1.4_beta.tbz2 image. If you're - using one of our bigger CDs, you'll also have a choice of a stage2 and - stage3 image. These images allow you to save time at the expense of - configurability (we've already chosen compiler optimizations and - default USE variables for you.) - - Code listing 9.1: Unpacking the Stages -# cd /mnt/gentoo -# tar -xvjpf /mnt/cdrom/gentoo/stage?-*.tbz2 -# mount -o bind /proc /mnt/gentoo/proc - - -# cp /etc/resolv.conf /mnt/gentoo/etc/resolv.conf - - If you are going to use GRP, now would be a good time to execute the - following commands: - - Code listing 9.2: Getting ready for GRP -# mkdir /mnt/gentoo/GRP -# mount -o bind /mnt/cdrom/gentoo/packages /mnt/gentoo/GRP - - Code listing 9.3: Entering the chroot Environment -# chroot /mnt/gentoo /bin/bash -# env-update -Regenerating /etc/ld.so.cache... -# source /etc/profile -The above points your shell to the new paths and updated binaries. - - After you execute these commands, you'll be "inside" your new Gentoo - Linux environment. - - 10.Getting the Current Portage Tree using Rsync - - Now, you'll need to run emerge sync. This will make sure that you have - the most current copy of the Portage tree. - - Code listing 10.1: Updating Using Rsync - -# emerge sync -# export CONFIG_PROTECT="-*" -# export USE="-* bootstrap build" -# emerge portage -# unset USE - - The Portage tree will be downloaded and stored in /usr/portage; it's - about 90Mb in size without tarballs. - - Note: The export CONFIG_PROTECT="-*" line ensures that any new scripts - installed to /etc will overwrite the old scripts (stored in - sys-apps/baselayout), bypassing Portage's new config file management - support. Type emerge --help config for more details. - - 11.Setting Gentoo optimizations (make.conf) - - Now that you have a working copy of the Portage tree, people using - stage1 to install will need to bootstrap their Gentoo Linux system as - follows. First edit the file /etc/make.conf. In this file, you should - set your USE flags, which specify optional functionality that you - would like to be built into packages; generally, the defaults (an - empty or unset USE variable) are fine. More information on USE flags - can be found [6]here. A complete list of current USE flags can be - found [7]here. - - You also should set appropriate CHOST, CFLAGS and CXXFLAGS settings - for the kind of system that you are creating (commented examples can - be found further down in the file.) Your best friend is man gcc to - figure out what additional CFLAGS and CXXFLAGS are available. Search - for 'Optimization'. - - If necessary, you can also set proxy information here if you are - behind a firewall. - - Code listing 11.1: Setting make.conf Options - # nano -w /etc/make.conf (Adjust these settings) - - Note: People who need to substantially tweak the build process should - take a look at the /etc/make.globals file. This file comprises gentoo - defaults and should never be touched. If the defaults do not suffice, - then new values should be put in /etc/make.conf, as entries in - make.conf override the entries in make.globals. If you're interested - in tweaking USE settings, look in /etc/make.profile/make.defaults. If - you want to turn off any USE settings found here, add an appropriate - USE="-foo" in /etc/make.conf (to turn off the foo USE setting.) - - 12.Starting from Stage1 - - The stage1 tarball is for ultimate tweakage. If you have picked this - tarball, you are most likely looking to have an uber-optimized system. - Have fun, because optimization is what Gentoo Linux is all about! - - Now, it's time to start the "bootstrap" process. This process takes - about two hours on my 1200Mhz AMD Athlon system. During this time, the - extracted build image will be prepped for compiling the rest of the - system. The GNU compiler suite will be built, as well as the GNU C - library. These are time consuming builds and make up the bulk of the - bootstrap process. - - Code listing 12.1: Bootstrapping -# cd /usr/portage -# scripts/bootstrap.sh - - The "bootstrap" process will now begin. - - Note: Portage by default uses /var/tmp during package building, often - using several hundred megabytes of temporary storage. If you would - like to change where Portage stores these temporary files, set a new - PORTAGE_TMPDIR before starting the bootstrap process, as follows: - - Code listing 12.2: Changing Portage's Storage Path - # export PORTAGE_TMPDIR="/otherdir/tmp" - - bootstrap.sh will build binutils, gcc, gettext, and glibc, rebuilding - binutils, gcc, and gettext after glibc. Needless to say, this process - takes a while. Have a nice nap. Once this process completes, your - system will be equivalent to a "stage2" system, which means you can - now move on to the stage2 instructions. - - 13.Starting from Stage2 - - The stage2 tarball already has the bootstrapping done for you. All - that you have to do is install the rest of the system. - - Note: If you haven't done so, please edit /etc/make.conf to your - flavor. - - Code listing 13.1: Installing the Rest of the System -# emerge -p system - [lists the packages to be installed] -# emerge system - - It's going to take a while to finish building the entire base system. - Your reward is that it will be thoroughly optimized for your system. - The drawback is that you have to find a way to keep yourself occupied - for some time to come. The author suggests "Star Wars - Super Bombad - Racing" for the PS2. - - When this process completes, your system will be the equivalent of a - stage3 system. You have a couple of choices on how to continue at this - point. You can move onto the stage3 instructions and complete those. - Doing that will get your system right up to date with what is in the - current Portage tree. This is not necessary, but it is highly - recommended. If you do not choose to get up to date with the stage3 - instructions, you can move onto the GRP install section. If you do not - wish to use GRP, you can move onto [8]Chapter 16: Final Steps. - - 14.Starting from Stage3 - - The stage3 tarball is already configured for your system. There is not - much to do for this stage, but it is a very good idea to update your - system to the newest available packages. - - Note: If you have not already edited /etc/make.conf to fit your - specifications, now would be a good time to do so. - - Code listing 14.1: Getting up-to-date - # emerge sync - # emerge -up world - lists [packages] to be installed - # emerge -u world - - Once you complete this step, you have some options on how to continue. - If you are going to be using GRP, please move onto the GRP section. If - you are not going to use GRP, you may continue onto [9]Chapter 16: - Final Steps. - - 15.Using GRP - - You can take advantage of pre-built GRP package sets to avoid - compiling certain popular and large packages. Currently, we provide - full builds of everything you need for openoffice-bin, GNOME, KDE and - xfree. - - First, you will need to cd to the location of the packages directory. - We have already mounted the directory at /GRP. In that directory you - will find the grp-install.sh script, an All directory that contains - all of the binary packages, and a list of available GRP packages. To - install any/all of these package sets you should do the following: - - Code listing 15.1: Using GRP -# cd /GRP -# sh grp-install.sh <list of package lists> -where <list of package lists> may be any of the *-list.txt files found in the s -ame directory. - - grp-install.sh can be run multiple times without replacing existing - installations. You can do a sh grp-install.sh for a basic usage - description if you are still a bit foggy. - - 16.Setting your Timezone - - At this point, you should have system that's ready for final - configuration. We'll start the configuration process by setting the - timezone. By setting the timezone before building the kernel we ensure - that users get reasonable uname -a output. - - Look for your timezone (or GMT if you using Greenwich Mean Time) in - /usr/share/zoneinfo. Then, make a symbolic link by typing: - - Code listing 16.1: Creating a symbolic link for timezome - # ln -sf /usr/share/zoneinfo/path/to/timezonefile /etc/localtime - - You might also want to check /etc/rc.conf to make sure your timezone - settings are correct. - - 17.Installing the kernel and a System Logger - - Note: If you haven't done so, please edit /etc/make.conf to your - flavor. - - You now need to merge Linux source ebuilds. Here are the ones we - currently offer: - ebuild description - gentoo-sources Our own performance and functionality-enhanced kernel - does not include XFS support. - xfs-sources Highly-compatible kernel with XFS support. - openmosix-sources A stock Linux kernel source tree patched with - support for the GPL [10]openMosix load-balancing/clustering technology - usermode-sources A stock Linux kernel source tree patched with support - for User-Mode Linux. ("Linux inside Linux" technology) - vanilla-sources A stock Linux kernel source tree, just like you'd get - from kernel.org - - Warning: If you are configuring your own kernel, be careful with the - grsecurity option. Being too aggressive with your security settings - can cause certain programs (such as X) to not run properly. If in - doubt, leave it out. - - Choose a kernel and then merge as follows: - - Code listing 17.1: Emerging Kernel Sources - # emerge sys-kernel/gentoo-sources - - Once you have a Linux kernel source tree available, it's time to - compile your own custom kernel. - - Please note that /usr/src/linux is a symlink to your current emerged - kernel source package, which is set automatically by Portage at emerge - time. If you have multiple kernel source packages, it is necessary to - set the /usr/src/linux symlink to the correct one before proceeding. - - Code listing 17.2: Compiling the Linux Kernel -# cd /usr/src/linux -# source /etc/profile -Again, this updates your paths. If you get an error saying gcc is not found, -this is what you may have to do. -# make menuconfig -# make dep && make clean bzImage modules modules_install -# mv /boot/bzImage /boot/bzImage.orig -[if bzImage already exists] -# cp /usr/src/linux/arch/i386/boot/bzImage /boot - - Warning: For your kernel to function properly, there are several - options that you will need to ensure are in the kernel proper -- that - is, they should be enabled and not compiled as modules. You will need - to enable the "Code maturity level options --> Prompt for development - and/or incomplete code/drivers" option to see several of these - selections. Under the "File systems" section, be sure to enable the - "/dev" file system support (note that you don't need to enable the - "/dev/pts file system support" option). You'll also need to enable the - "Virtual Memory Filesystem". Be sure to enable "ReiserFS" if you have - any ReiserFS partitions; the same goes for "Ext3". If you're using - XFS, enable the "SGI XFS filesystem support" option. It's always a - good idea to leave ext2 enabled whether you are using it or not. Also, - most people using IDE hard drives will want to enable the "USE DMA by - default" option; otherwise, your IDE drives may perform very poorly. - Of course, remember to enable "IDE disk" support as well -- otherwise - your kernel won't be able to see your IDE disks. - - If you are using hardware RAID you will need to enable a couple more - options in the kernel: For Highpoint RAID controllers select hpt366 - chipset support, support for IDE RAID controllers and Highpoint 370 - software RAID.For Promise RAID controllers select PROMISE - PDC202{46|62|65|67|68|69|70} support, support for IDE RAID controllers - and Support Promise software RAID (Fasttrak(tm)) - - If you use PPPoE to connect to Internet, you will need the following - options in the kernel (built-in or as preferably as modules) : "PPP - (point-to-point protocol) support", "PPP support for async serial - ports", "PPP support for sync tty ports". The two compression options - won't harm but are not definitely needed, neither does the "PPP over - Ethernet" option, that might only be used by rp-pppoe when configured - to do kernel mode PPPoE. - - If you have an IDE cd burner, then you need to enable SCSI emulation - in the kernel. Turn on "ATA/IDE/MFM/RLL support" ---> "IDE, ATA and - ATAPI Block devices" ---> "SCSI emulation support" (I usually make it - a module), then under "SCSI support" enable "SCSI support", "SCSI - CD-ROM support" and "SCSI generic support" (again, I usually compile - them as modules). If you also choose to use modules, then echo -e - "ide-scsi\nsg\nsr_mod" >> /etc/modules.autoload to have them - automatically added at boot time. - - Note: For those who prefer it, it is now possible to install Gentoo - Linux with a 2.2 kernel. However, doing this comes at a price: you - will lose many of the nifty features that are new to the 2.4 series - kernels (such as XFS and tmpfs filesystems, iptables, and more), - although the 2.2 kernel sources can be patched with ReiserFS and devfs - support. Gentoo linux boot scripts require either tmpfs or ramdisk - support in the kernel, so 2.2 kernel users need to make sure that - ramdisk support is compiled in (ie, not a module). It is vital that a - gentoo=notmpfs flag be added to the kernel line in - /boot/grub/grub.conf for the 2.2 kernel so that a ramdisk is mounted - for the bootscripts instead of tmpfs. If you choose not to use devfs, - then gentoo=notmpfs,nodevfs should be used instead. - - Your new custom kernel (and modules) are now installed. Now you need - to choose a system logger that you would like to install. We offer - sysklogd, which is the traditional set of system logging daemons. We - also have msyslog and syslog-ng as well as metalog. Power users seem - to gravitate away from sysklogd (not very good performance) and - towards the newer alternatives. If in doubt, you may want to try - metalog, since it seems to be quite popular. To merge your logger of - choice, type one of the next four lines: - - Code listing 17.3: Emerging System Logger of Choice -# emerge app-admin/sysklogd -# rc-update add sysklogd default -or -# emerge app-admin/syslog-ng -# rc-update add syslog-ng default -or -# emerge app-admin/metalog -# rc-update add metalog default -or -# emerge app-admin/msyslog -# rc-update add msyslog default - - Warning: In the case of syslog-ng you need to create - /etc/syslog-ng/syslog-ng.conf. See /etc/syslog-ng for a sample - configuration file. - - Important: Metalog flushes output to the disk in blocks, so messages - aren't immediately recorded into the system logs. If you are trying to - debug a daemon, this performance-enhancing behavior is less than - helpful. When your Gentoo Linux system is up and running, you can send - metalog a USR1 signal to temporarily turn off this message buffering - (meaning that tail -f /var/log/everything/current will now work in - real time, as expected), and a USR2 signal to turn buffering back on - again. If you want to disable buffering permanently, you can change - METALOG_OPTS="-B" to METALOG_OPTS="-B -s" in /etc/conf.d/metalog. - - Now, you may optionally choose a cron package that you'd like to use. - Right now, we offer dcron, fcron and vcron. If you don't know which - one to choose, you might as well grab vcron. They can be installed as - follows: - - Code listing 17.4: Choosing a CRON Daemon -# emerge sys-apps/dcron -# crontab /etc/crontab -or -# emerge sys-apps/fcron -# crontab /etc/crontab -or -# emerge sys-apps/vcron -You do not need to run crontab /etc/crontab if using vcron. -Don't forget to add your *cron to the proper init level. -# rc-update add *cron default - - For more information on starting programs and daemons at startup, see - the [11]rc-script guide. - - 18.Installing miscellany necessary packages - - If you need rp-pppoe to connect to the net, be aware that at this - point it has not been installed. It would be the good time to do it. - - Code listing 18.1: Installing rp-pppoe - # USE="-X" emerge rp-pppoe - - Note: The USE="-X" prevents pppoe from installing its optional X - interface, which is a good thing, because X and its dependencies would - also be emerged. You can always recompile rp-pppoe with X support - later. - - Note: Please note that the rp-pppoe is built but not configured. You - will have to do it again using adsl-setup when you boot into your - Gentoo system for the first time. - - You may need to install some additional packages in the Portage tree - if you are using any optional features like XFS, ReiserFS or LVM. If - you're using XFS, you should emerge the xfsprogs package: - - Code listing 18.2: Emerging Filesystem Tools -# emerge sys-apps/xfsprogs -If you'd like to use ReiserFS, you should emerge the ReiserFS tools: -# emerge sys-apps/reiserfsprogs -If you'd like to use JFS, you should emerge the JFS tools: -# emerge jfsutils -If you're using LVM, you should emerge the lvm-user package: -# emerge sys-apps/lvm-user - - If you're a laptop user and wish to use your PCMCIA slots on your - first real reboot, you'll want to make sure you install the pcmcia-cs - package. - - Code listing 18.3: Emerging PCMCIA-cs - # emerge sys-apps/pcmcia-cs - - Warning: You will have to re-emerge pcmcia-cs after installation to - get PCMCIA to work. - - 19.Modifying /etc/fstab for your machine - - Your Gentoo Linux system is almost ready for use. All we need to do - now is configure a few important system files and install the GRUB - boot loader. The first file we need to configure is /etc/fstab. - Remember that you should use the notail option for your boot partition - if you chose to create a ReiserFS filesystem on it. Remember to - specify ext2, ext3 or reiserfs filesystem types as appropriate. - - Use something like the /etc/fstab listed below, but of course be sure - to replace "BOOT", "ROOT" and "SWAP" with the actual block devices you - are using (such as hda1, etc.) - - Code listing 19.1: Editing fstab -# /etc/fstab: static file system information. -# -# noatime turns off atimes for increased performance (atimes normally aren't -# needed; notail increases performance of ReiserFS (at the expense of storage -# efficiency). It's safe to drop the noatime options if you want and to -# switch between notail and tail freely. - -# <fs> <mountpoint> <type> <opts> <dump/pass> - -# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts. - -/dev/BOOT /boot ext2 noauto,noatime 1 2 -/dev/ROOT / ext3 noatime 0 1 -/dev/SWAP none swap sw 0 0 -/dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,ro 0 0 -proc /proc proc defaults 0 0 - - Warning: Please notice that /boot is NOT mounted at boottime. This is - to protect the data in /boot from corruption. If you need to access - /boot, please mount it! - - 20.Setting the Root Password - - Before you forget, set the root password by typing: - - Code listing 20.1: Setting the root Password - # passwd - - You will also want to add a non-root user for everyday use. Please - consult the [12]Gentoo FAQ. - - 21.Setting your Hostname - - Edit this file so that it contains your fully-qualified domain name on - a single line, i.e. mymachine.mydomain.com. - - Code listing 21.1: Configuring Hostname - # echo mymachine.mydomain.com > /etc/hostname - - 22.Modifying /etc/hosts - - This file contains a list of ip addresses and their associated - hostnames. It's used by the system to resolve the IP addresses of any - hostnames that may not be in your nameservers. Here's a template for - this file: - - Code listing 22.1: Hosts Template -127.0.0.1 localhost -# the next line contains your IP for your local LAN, and your associated machin -e name -192.168.1.1 mymachine.mydomain.com mymachine - - Note: If you are on a DHCP network, it might be helpful to set - localhost to your machine's actual hostname. This will help GNOME and - many other programs in name resolution. - - 23.Final Network Configuration - - Add the names of any modules that are necessary for the proper - functioning of your system to /etc/modules.autoload file (you can also - add any options you need to the same line.) When Gentoo Linux boots, - these modules will be automatically loaded. Of particular importance - is your ethernet card module, if you happened to compile it as a - module: - - Code listing 23.1: /etc/modules.autoload -This is assuming that you are using a 3com card. - Check /lib/modules/`uname -r`/kernel/drivers/net for your card. - -3c59x - - Edit the /etc/conf.d/net script to get your network configured for - your first boot: - - Code listing 23.2: Boottime Network Configuration -# nano -w /etc/conf.d/net -# rc-update add net.eth0 default - - If you have multiple network cards you need to create additional - net.ethx scripts for each one (x = 1, 2, ...): - - Code listing 23.3: Multiple Network Interfaces -# cd /etc/init.d -# cp net.eth0 net.ethx -# rc-update add net.ethx default - - If you have a PCMCIA card installed, have a quick look into - /etc/init.d/pcmcia to verify that things seem all right for your - setup, then add this line to the top of /etc/init.d/net.ethx: - - Code listing 23.4: PCMCIA depend in /etc/init.d/net.ethx -depend() { - need pcmcia -} - - This makes sure that the PCMCIA drivers are autoloaded whenever your - network is loaded. - - 24.Final steps: Configure Basic Settings (including the international - keymap setting) - - Code listing 24.1: Basic Configuration - # nano -w /etc/rc.conf - - Follow the directions in the file to configure the basic settings. All - users will want to make sure that CLOCK is set to his/her liking. - International keyboard users will want to set the KEYMAP variable - (browse /usr/share/keymaps to see the various possibilities). - - 25.Configure a Bootloader - - Notes - - In the spirit of Gentoo, users now have more than one bootloader to - choose from. Using our virtual package system, users are now able to - choose between both GRUB and LILO as their bootloaders. - - Please keep in mind that having both bootloaders installed is not - necessary. In fact, it can be a hinderance, so please only choose one. - - Important: If you are installing Gentoo Linux on a system with an - NVIDIA nForce or nForce2 chipset with an integrated GeForce graphics - card, you should use LILO and avoid GRUB. With on-board video enabled, - the low memory area of your RAM is used as video RAM. Since GRUB also - uses low memory at boot time, it will experience an "out of memory" - condition. So, if you have an nForce or potentially other board with - on-board video, use LILO. Even if you're using off-board video right - now, it'd be nice to be able to remove the graphics card and use the - on-board video in a pinch, wouldn't it? :) - - Configuring GRUB - - The most critical part of understanding GRUB is getting comfortable - with how GRUB refers to hard drives and partitions. Your Linux - partition /dev/hda1 is called (hd0,0) under GRUB. Notice the - parenthesis around the hd0,0 - they are required. Hard drives count - from zero rather than "a", and partitions start at zero rather than - one. Be aware too that with the hd devices, only harddrives are - counted, not atapi-ide devices such as cdrom players, burners, and - that the same construct can be used with scsi drives. (Normally they - get higher numbers than ide drives except when the bios is configured - to boot from scsi devices.) Assuming you have a harddrive on /dev/hda, - a cdrom player on /dev/hdb, a burner on /dev/hdc and a second hardrive - on /dev/hdd, for example, and no scsi harddrive /dev/hdd7 gets - translated to (hd1,6). It might sound tricky, and tricky it is indeed, - but as we will see, grub offers a tab completion mechanism that comes - handy for those of you having a lot of harddrives and partitions and - who are a little lost in the grub numbering scheme. Having gotten the - feel for that, it's time to install GRUB. - - The easiest way to install GRUB is to simply type grub at your - chrooted shell prompt: - - Code listing 25.1: Installing GRUB -# emerge grub -# grub - - Important: If you are using hardware RAID this part will not work at - this time. Skip to the section on making your grub.conf. After that we - will complete the grub setup for RAID controllers - - You'll be presented with the grub> grub command-line prompt. Now, you - need to type in the right commands to install the GRUB boot record - onto your hard drive. In my example configuration, I want to install - the GRUB boot record on my hard drive's MBR (master boot record), so - that the first thing I see when I turn on the computer is the GRUB - prompt. In my case, the commands I want to type are: - - Code listing 25.2: GRUB on the MBR -grub> root (hd0,0) // Your boot partition -grub> setup (hd0) // Where the boot record is installed, here, it is the MBR - - Code listing 25.3: GRUB not on the MBR -Alternatively, if you wanted to install the bootloader somewhere other than the - MBR -grub> root (hd0,0) // Your boot partition -grub> setup (hd0,4) // Where the boot record is installed, here it is /dev/hda5 -grub> quit - - Here's how the two commands work. The first root ( ) command tells - GRUB the location of your boot partition (in our example, /dev/hda1 or - (hd0,0) in GRUB terminology. Then, the second setup ( ) command tells - GRUB where to install the boot record - it will be configured to look - for its special files at the root ( ) location that you specified. In - my case, I want the boot record on the MBR of the hard drive, so I - simply specify /dev/hda (also known as (hd0)). If I were using another - boot loader and wanted to set up GRUB as a secondary boot-loader, I - could install GRUB to the boot record of a particular partition. In - that case, I'd specify a particular partition rather than the entire - disk. Once the GRUB boot record has been successfully installed, you - can type quit to quit GRUB. - - Note: The tab completion mechanism of grub can be used from within - grub, assuming you wrote root ( and that you hit the TAB key, you - would be prompted with a list of the available devices (not only - harddrives), hitting the TAB key having written root (hd, grub would - print the available harddrives and hitting the TAB key after writing - root (hd0, would make grub print the list of partitions on the first - harddrive. Checking the syntax of the grub location with completion - should really help to make the right choice. - - Gentoo Linux is now installed, but we need to create the - /boot/grub/grub.conf file so that we get a nice GRUB boot menu when - the system reboots. Here's how to do it. - - Important: To ensure backwards compatibility with GRUB, make sure to - make a link from grub.conf to menu.lst. You can do this by doing ln -s - /boot/grub/grub.conf /boot/grub/menu.lst . - - Now, create the grub.conf file (nano -w /boot/grub/grub.conf), and add - the following to it: - - Code listing 25.4: Grub.conf for GRUB -default 0 -timeout 30 -splashimage=(hd0,0)/boot/grub/splash.xpm.gz - -title=My example Gentoo Linux -root (hd0,0) -kernel (hd0,0)/boot/bzImage root=/dev/hda3 - - #Below is for setup using hardware RAID -title=My Gentoo Linux on RAID -root (hd0,0) -kernel (hd0,0)/boot/bzImage root=/dev/ataraid/dXpY - -# Below needed only for people who dual-boot -title=Windows NT Workstation -root (hd0,5) -chainloader (hd0,5)+1 - - Note: (hd0,0) should be written without any spaces inside the - parentheses. - - Important: If you set up scsi emulation for an IDE cd burner earlier, - then to get it to actually work you need to add an "hdx=ide-scsi" - fragment to the kernel line in grub.conf (where "hdx" should be the - device for your cd burner). - - After saving this file, Gentoo Linux installation is complete. - Selecting the first option will tell GRUB to boot Gentoo Linux without - a fuss. The second part of the grub.conf file is optional, and shows - you how to use GRUB to boot a bootable Windows partition. - - Note: Above, (hd0,0) should point to your "boot" partition (/dev/hda1 - in our example config) and /dev/hda3 should point to your root - filesystem. (hd0,5) contains the NT boot loader. - - Note: The path to the kernel image is relative to the boot partition. - If for example you have separated boot partition (hd0,0) and root - partition (hd0,1), all paths in the grub.conf file above will become - /bzImage. - - If you need to pass any additional options to the kernel, simply add - them to the end of the kernel command. We're already passing one - option (root=/dev/hda3), but you can pass others as well. In - particular, you can turn off devfs by default (not recommended unless - you know what you're doing) by adding the gentoo=nodevfs option to the - kernel command. - - Note: Unlike in earlier versions of Gentoo Linux, you no longer have - to add devfs=mount to the end of the kernel line to enable devfs. In - rc6 devfs is enabled by default. - - Configuring LILO - - While GRUB may be the new alternative for most people, it is not - always the best choice. LILO, the LInuxLOader, is the tried and true - workhorse of Linux bootloaders. Here's how to install LILO if you - would like to use it instead of GRUB: - - The first step is to emerge LILO: - - Code listing 25.5: Emerging LILO - # emerge lilo - - Now it is time to configure LILO. I will give you a small lilo.conf to - use, and I will explain the different parts of the file. - - Code listing 25.6: Example lilo.conf -boot=/dev/hda -map=/boot/map -install=/boot/boot.b -prompt -timeout=50 -message=/boot/message -lba32 -default=linux - -image=/boot/vmlinuz-2.4.20 - label=linux - read-only - root=/dev/hda5 - -#For dual booting windows/other OS -other=/dev/hda1 - label=dos - - * boot=/dev/hda tells LILO to install itself on the first - hard disk on the first IDE controller. - * map=/boot/map states the map file. In normal use, this should not - be modified. - * install=/boot/boot.b tells LILO to install the specified file as - the new boot sector. In normal use, this should not be altered. If - the install line is missing, LILO will assume a default of - /boot/boot.b as the file to be used. - * The existence of prompt tells LILO to show you whatever is - referenced in the message line. While it is not recommended that - you remove the prompt line, if you do remove it, you can still get - a prompt by holding down the [Shift] key while your machine starts - to boot. - * timeout=50 sets the amount of time that LILO will wait for user - input before proceeding with booting the default line entry. This - is measured in tenths of a second, with 50 as the default. - * message=/boot/message refers to the screen that LILO displays to - let you select the operating system or kernel to boot. - * lba32 describes the hard disk geometry to LILO. Another common - entry here is linear. You should not change this line unless you - are very aware of what you are doing. Otherwise, you could put - your system in an unbootable state. - * default=linux refers to the default operating system for LILO to - boot from the options listed below this line. The name linux - refers to the label line below in each of the boot options. - * image=/boot/vmlinuz-2.4.20 specifies the linux kernel to boot with - this particular boot option. - * label=linux names the operating system option in the LILO screen. - In this case, it is also the name referred to by the default line. - * read-only specifies that the root partition (see the root line - below) is read-only and cannot be altered during the boot process. - * root=/dev/hda5 tells LILO what disk partition to use as the root - partition. - - Note: Thanks to [13]Redhat.com for this information. - - After you have edited your lilo.conf file, it is time to run LILO to - load the information into the MBR: - - Code listing 25.7: Running LILO - # /sbin/lilo - - LILO is configured, and now your machine is ready to boot into Gentoo - Linux! - - 26.Creating Bootdisks - - GRUB Bootdisks - - It is always a good idea to make a boot disk the first time you - install any Linux distribution. This is a security blanket, and - generally not a bad thing to do. If you are using some kinds of - hardware RAID, you may need make a GRUB boot disk. With these types of - hardware RAID, if you try to install grub from your chrooted shell it - will fail. If you are in this camp, make a GRUB boot disk, and when - you reboot the first time you can install GRUB to the MBR. Make your - bootdisk like this: - - Code listing 26.1: Creating a GRUB Bootdisk -# mke2fs /dev/fd0 -# mount /dev/fd0 /mnt/floppy -# mkdir -p /mnt/floppy/boot/grub -# cp /usr/share/grub/i386-pc/stage1 /mnt/floppy/boot/grub/ -# cp /usr/share/grub/i386-pc/stage2 /mnt/floppy/boot/grub/ -# umount /mnt/floppy -# grub - -grub> root (fd0) -grub> setup (fd0) -grub> quit - - Now reboot and load the floppy. At the floppy's grub> prompt, you can - now execute the necessary root and setup commands. - - LILO Bootdisks - - If you are using LILO, it is also a good idea to make a bootdisk: - - Code listing 26.2: Making a LILO Bootdisk -# dd if=/boot/your_kernel of=/dev/fd0 -This will only work if your kernel is smaller than 1.4MB - - 27.Installation Complete! - - Now, Gentoo Linux is installed. The only remaining step is to exit the - chrooted shell, update necessary configuration files, safely unmount - your partitions and reboot the system: - - Code listing 27.1: Rebooting the System -# etc-update -# exit -// This exits the chrooted shell; you can also type ^D -# cd / -# umount /mnt/gentoo/boot -# umount /mnt/gentoo/proc -# umount /mnt/gentoo/dev -# umount /mnt/gentoo -# reboot - - Note: After rebooting, it is a good idea to run the update-modules - command to create the /etc/modules.conf file. Instead of modifying - this file directly, you should generally make changes to the files in - /etc/modules.d. - - Important: Remember if you are running hardware RAID, you must use the - bootdisk for the first reboot. then go back and install grub the way - everyone else did the first time. You are done -- congratulations! - - If you have any questions or would like to get involved with Gentoo - Linux development, consider joining our gentoo-user and gentoo-dev - mailing lists (there's a "click to subscribe" link on our [14]main - page). We also have a handy [15]Desktop configuration guide that will - help you to continue configuring your new Gentoo Linux system, and a - useful [16]Portage user guide to help familiarize you with Portage - basics. You can find the rest of the Gentoo Documentation [17]here. If - you have any other questions involving installation or anything for - that matter, please check the Gentoo Linux [18]FAQ. Enjoy and welcome - to Gentoo Linux! - - 28.Gentoo-Stats - - The Gentoo Linux usage statistics program was started as an attempt to - give the developers a way to find out about their user base. It - collects information about Gentoo Linux usage to help us in set - priorities our development. Installing it is completely optional, and - it would be greatly appreciated if you decide to use it. Compiled - statistics can be viewed at [19]http://stats.gentoo.org/. - - The gentoo-stats server will assign a unique ID to your system. This - ID is used to make sure that each system is counted only once. The ID - will not be used to individually identify your system, nor will it be - mached against an IP address or other personal information. Every - precaution has been taken to assure your privacy in the development of - this system. The following are the things that we are monitoring right - now through our "gentoo-stats" program: - * installed packages and their version numbers - * CPU information: speed (MHz), vendor name, model name, CPU flags - (like "mmx" or "3dnow") - * memory information (total available physical RAM, total available - swap space) - * PCI cards and network controller chips - * the Gentoo Linux profile your machine is using (that is, where the - /etc/make.profile link is pointing to). - - We are aware that disclosure of sensitive information is a threat to - most Gentoo Linux users (just as it is to the developers). - * Unless you modify the gentoo-stats program, it will never transmit - sensitive information such as your passwords, configuration data, - shoe size... - * Transmission of your e-mail addresses is optional and turned off - by default. - * The IP address your data transmission originates from will never - be logged in such a way that we can identify you. There are no "IP - address/system ID" pairs. - - The installation is easy - just run the following commands: - - Code listing 28.1: Installing gentoo-stats -# emerge gentoo-stats // Installs gentoo-stats -# gentoo-stats --new // Obtains a new system ID - - The second command above will request a new system ID and enter it - into /etc/gentoo-stats/gentoo-stats.conf automatically. You can view - this file to see additional configuration options. - - After that, the program should be run on a regular schedule - (gentoo-stats does not have to be run as root). Add this line to your - crontab: - - Code listing 28.2: Updating gentoo-stats with cron - 0 0 * * 0,4 /usr/sbin/gentoo-stats --update > /dev/null - - The gentoo-stats program is a simple perl script which can be viewed - with your favortive pager or editor: /usr/sbin/gentoo-stats. - line - Updated 26 Feb 2003 - line - [20]Daniel Robbins - Chief Architect - Chris Houser - Author - [21]Jerry Alexandratos - Author - [22]Grant Goodyear - Ghost - [23]John P. Davis - Editor - [24]Pierre-Henri Jondot - Editor - [25]Eric Stockbridge - Editor - [26]Rajiv Manglani - Editor - [27]Jungmin Seo - Editor - [28]Stoyan Zhekov - Editor - line - Summary: These instructions step you through the process of installing - Gentoo Linux 1.4_rc2 and 1.4_rc3. The Gentoo Linux installation - process supports various installation approaches, depending upon how - much of the system you want to custom-build from scratch. - line - - Donate to support our development efforts. - Make payments with PayPal - it's fast, free and secure! - line - [29]Win4Lin at NeTraverse - - Win4Lin from NeTraverse lets you run Windows applications under Gentoo - Linux at native speeds. [30]Purchase Win4Lin "Gentoo Edition" and - you'll also get a special Gentoo discount. Every sale also helps - support Gentoo Linux development :) - line - [31]DDR Memory at Crucial.com - - Purchase RAM from Crucial.com and a percentage of your sale will go - towards further Gentoo Linux development. - line - Copyright 2001-2003 Gentoo Technologies, Inc. Questions, Comments, - Corrections? Email [32]www@gentoo.org. - -References - - 1. http://www.gentoo.org/ - 2. http://www.gentoo.org/ - 3. http://www.ibiblio.org/gentoo/releases/1.4_rc2/x86/ - 4. http://bugs.gentoo.org/ - 5. http://www.zip.com.au/~akpm/linux/ext3/ext3-usage.html - 6. http://www.gentoo.org/doc/en/use-howto.xml - 7. http://www.gentoo.org/dyn/use-index.xml - 8. http://www.gentoo.org/doc/en/gentoo-x86-install.xml#doc_chp16 - 9. http://www.gentoo.org/doc/en/gentoo-x86-install.xml#doc_chp16 - 10. http://www.openmosix.com/ - 11. http://www.gentoo.org/doc/en/rc-scripts.xml - 12. http://www.gentoo.org/doc/en/faq.xml - 13. http://www.redhat.com/ - 14. http://www.gentoo.org/ - 15. http://www.gentoo.org/doc/en/desktop.xml - 16. http://www.gentoo.org/doc/en/portage-user.xml - 17. http://www.gentoo.org/main/en/docs.xml - 18. http://www.gentoo.org/doc/en/faq.xml - 19. http://stats.gentoo.org/ - 20. mailto:drobbins@gentoo.org - 21. mailto:jerry@gentoo.org - 22. mailto:g2boojum@gentoo.org - 23. mailto:zhen@gentoo.org - 24. mailto:Pierre-Henri.Jondot@wanadoo.fr - 25. mailto:stocke2@gentoo.org - 26. mailto:rajiv@gentoo.org - 27. mailto:seo@gentoo.org - 28. mailto:zhware@gentoo.org - 29. http://www.netraverse.com/gentoo.htm - 30. http://www.netraverse.com/gentoo.htm - 31. http://www.qksrv.net/click-477620-5032687 - 32. mailto:www@gentoo.org diff --git a/src/livecd/profiles/lw-ut2003/aux-files/local b/src/livecd/profiles/lw-ut2003/aux-files/local deleted file mode 100644 index 2c0367accd..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/local +++ /dev/null @@ -1,97 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw-ut2003/aux-files/Attic/local,v 1.1 2003/10/19 03:46:49 livewire Exp $ - -HILITE="\033[1m" -NORMAL="\033[0m" - -NET="no" -GAME="yes" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "forceloadnet" ] - then - NET="yes" - elif [ "$x" = "noX" ] - then - GAME="no" - fi -done - -depend() { - before autoconfig -} - -blurb() { - echo -ne ${HILITE}${1} - #blurblen=${#1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} - -start() { - umount /initrd - /sbin/freeramdisk /dev/ram0 - #make our mtab look sane... - local mycdloc - mycdloc=`cat /tmp/mycd` - mycdloc=${mycdloc#/newroot*} - mount -f $mycdloc /mnt/cdrom -t iso9660 -o ro - if [ -e /mnt/livecd.cloop ] - then - mount -f /mnt/livecd.cloop /mnt/cloop -t ext2 -o ro - #cloop was cached to tmpfs so that CD could be unmounted. - else - mount -f /mnt/cdrom/livecd.cloop /mnt/cloop -t ext2 -o ro - fi - rm /tmp/mycd - FOUNDMEM="$(awk '/MemTotal/{print $2}' /proc/meminfo)" - TOTALMEM="$(awk 'BEGIN{m=0};/MemFree|Cached/{m+=$2};END{print m}' /proc/meminfo)" - MINSIZE=2000 - # At least this much memory minus 30% should remain when home and var are full. - MINLEFT=16000 - # Maximum ramdisk size - MAXSIZE="$(expr $TOTALMEM - $MINLEFT)" - # Default ramdisk size for ramdisk - RAMSIZE="$(expr $TOTALMEM / 5)" - # Check for sufficient memory to mount extra ramdisk for /home + /var - if test -n "$TOTALMEM" -a "$TOTALMEM" -gt "$MINLEFT"; then - test -z "$RAMSIZE" && RAMSIZE=1000000 - fi -# tmpfs/varsize version, can use swap - RAMSIZE=$(expr $RAMSIZE \* 5) - - mount -f tmpfs / -t tmpfs -o rw,size=${RAMSIZE}k - echo "10000" > /proc/sys/fs/file-max -# echo root:`pwgen -s 16` | chpasswd > /dev/null 2>&1 - if [ "$NET" = "yes" ] - then - ebegin "Auto-detecting network modules" - # Disable kernel messages to console: - echo "0" > /proc/sys/kernel/printk - local x - for x in /lib/modules/*/kernel/drivers/net/* - do - y=${x##*/} - y=${y%%.*} - echo -ne " ${GOOD}*${NORMAL} Scanning for ${y}..." - insmod -f ${x} > /dev/null 2>&1 - backup - done - echo "6" > /proc/sys/kernel/printk - fi - if [ "$GAME" = "yes" ] - then - touch /etc/startgame - fi -} - -stop() { - return -} - -# vim:ts=4 diff --git a/src/livecd/profiles/lw-ut2003/aux-files/localstart.gl b/src/livecd/profiles/lw-ut2003/aux-files/localstart.gl deleted file mode 100644 index f875ec495c..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/localstart.gl +++ /dev/null @@ -1,8 +0,0 @@ -# /etc/conf.d/local.start: -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw-ut2003/aux-files/Attic/localstart.gl,v 1.1 2003/10/19 03:46:49 livewire Exp $ - -# This is a good place to load any misc. -# programs on startup ( 1>&2 ) - -modprobe nvidia && opengl-update nvidia && cp /etc/X11/xfree-nvidia /etc/X11/XF86Config -modprobe fglrx && opengl-update ati && cp /etc/X11/xfree-ati /etc/X11/XF86Config diff --git a/src/livecd/profiles/lw-ut2003/aux-files/login.defs b/src/livecd/profiles/lw-ut2003/aux-files/login.defs deleted file mode 100644 index 8225588ab9..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/login.defs +++ /dev/null @@ -1,133 +0,0 @@ -# -# /etc/login.defs - Configuration control definitions for the login package. -# -# All items are optional - if not specified then the described action or -# option will be inhibited. -# -# Comment lines (lines beginning with "#") and blank lines are ignored. -# - -# -# Delay in seconds before being allowed another attempt after a login failure -# -FAIL_DELAY 3 - -# -# Enable logging and display of /var/log/faillog login failure info. -# -FAILLOG_ENAB yes - -# -# Enable display of unknown usernames when login failures are recorded. -# -LOG_UNKFAIL_ENAB no - -# -# Enable logging and display of /var/log/lastlog login time info. -# -LASTLOG_ENAB no - -# -# If defined, ":" delimited list of "message of the day" files to -# be displayed upon login. -# -MOTD_FILE /etc/motd -#MOTD_FILE /etc/motd:/usr/lib/news/news-motd - -# -# If defined, file which maps tty line to TERM environment parameter. -# Each line of the file is in a format something like "vt100 tty01". -# -TTYTYPE_FILE /etc/ttytype - -# -# If defined, login failures will be logged here in a utmp format. -# last, when invoked as lastb, will read /var/log/btmp, so... -# -FTMP_FILE /var/log/btmp - -# -# If defined, file which inhibits all the usual chatter during the login -# sequence. If a full pathname, then hushed mode will be enabled if the -# user's name or shell are found in the file. If not a full pathname, then -# hushed mode will be enabled if the file exists in the user's home directory. -# -HUSHLOGIN_FILE .hushlogin -#HUSHLOGIN_FILE /etc/hushlogins - -# -# The default PATH settings. -# -ENV_PATH /usr/local/bin:/usr/bin:/bin - -# -# The default PATH settings for root: -# -ENV_ROOTPATH /sbin:/bin:/usr/sbin:/usr/bin - -# -# The default PATH settings when su'ing to root: -# -ENV_SUPATH /sbin:/bin:/usr/sbin:/usr/bin - -# -# Terminal permissions -# -# TTYGROUP Login tty will be assigned this group ownership. -# TTYPERM Login tty will be set to this permission. -# -# If you have a "write" program which is "setgid" to a special group -# which owns the terminals, define TTYGROUP to the group number and -# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign -# TTYPERM to either 622 or 600. -# -TTYGROUP tty -TTYPERM 0600 - -# -# Password aging controls: -# -# PASS_MAX_DAYS Maximum number of days a password may be used. -# PASS_MIN_DAYS Minimum number of days allowed between password changes. -# PASS_MIN_LEN Minimum acceptable password length. -# PASS_WARN_AGE Number of days warning given before a password expires. -# -PASS_MAX_DAYS 99999 -PASS_MIN_DAYS 0 -PASS_MIN_LEN 5 -PASS_WARN_AGE 7 - -# -# Min/max values for automatic uid selection in useradd -# -UID_MIN 1000 -UID_MAX 60000 - -# -# Min/max values for automatic gid selection in groupadd -# -GID_MIN 100 -GID_MAX 60000 - -# -# Max number of login retries if password is bad -# -LOGIN_RETRIES 3 - -# -# Max time in seconds for login -# -LOGIN_TIMEOUT 60 - -# -# Require password before chfn/chsh can make any changes. -# -CHFN_AUTH yes - -# -# Which fields may be changed by regular users using chfn - use -# any combination of letters "frwh" (full name, room number, work -# phone, home phone). If not defined, no changes are allowed. -# For backward compatibility, "yes" = "rwh" and "no" = "frwh". -# -CHFN_RESTRICT rwh diff --git a/src/livecd/profiles/lw-ut2003/aux-files/md b/src/livecd/profiles/lw-ut2003/aux-files/md deleted file mode 100644 index 1920ea11f8..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/md +++ /dev/null @@ -1,57 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw-ut2003/aux-files/Attic/md,v 1.1 2003/10/19 03:46:49 livewire Exp $ - -HILITE="\033[1m" -NORMAL="\033[0m" - -RAID="no" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "noraid" ] - then - RAID="no" - fi -done - -depend() { - after checkfs - after * -} - -blurb() { - echo -ne ${HILITE}${1} - #blurblen=${#1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} -start() { - ebegin "Raid Setup" - -if [ "$RAID" = "yes" ] - then - ebegin "Auto-detecting EVMS modules" - # Disable kernel messages to console: - echo "0" > /proc/sys/kernel/printk - local x - for x in /lib/modules/*/kernel/drivers/evms/* - do - y=${x##*/} - y=${y%%.*} - echo -ne " ${GOOD}*${NORMAL} Scanning for ${y}..." - insmod -f ${x} > /dev/null 2>&1 - backup - done - fi - -} - -stop() { - return -} - -# vim:ts=4 diff --git a/src/livecd/profiles/lw-ut2003/aux-files/memtest b/src/livecd/profiles/lw-ut2003/aux-files/memtest Binary files differdeleted file mode 100644 index c8cfeb44a4..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/memtest +++ /dev/null diff --git a/src/livecd/profiles/lw-ut2003/aux-files/menu.blackbox b/src/livecd/profiles/lw-ut2003/aux-files/menu.blackbox deleted file mode 100644 index 5d473bbf00..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/menu.blackbox +++ /dev/null @@ -1,32 +0,0 @@ -[begin] (Gentoo) - [exec] (Americas Army) {cd /opt/armyops170/System;./armyops-bin} - [exec] (Gamelaunch) {gamelaunch} - [exec] (Mozilla) {mozilla} - [exec] (Volume) {aumix} - - -[submenu] (Setup Network) - [exec] (net-setup eth0) {xterm -e "net-setup eth0"} - [exec] (net-setup eth1) {xterm -e "net-setup eth1"} - -[end] - -[submenu] (Terminals) - [exec] (xterm) {xterm -fg white -bg black} -[end] - -[submenu] (Settings) - [workspaces] (Workspace List) -[submenu] (Styles) {Choose a style...} - [stylesdir] (/usr/share/commonbox/styles) -[end] - - [include] (/usr/share/commonbox/imagebgmenu) - [include] (/usr/share/commonbox/solidbgmenu) - [config] (Configure) - [reconfig] (Reload config) -[end] - - [restart] (Restart) -[end] - diff --git a/src/livecd/profiles/lw-ut2003/aux-files/mingetty b/src/livecd/profiles/lw-ut2003/aux-files/mingetty Binary files differdeleted file mode 100644 index aaa47dc976..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/mingetty +++ /dev/null diff --git a/src/livecd/profiles/lw-ut2003/aux-files/modules b/src/livecd/profiles/lw-ut2003/aux-files/modules deleted file mode 100644 index 76e7d81b33..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/modules +++ /dev/null @@ -1,26 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw-ut2003/aux-files/Attic/modules,v 1.1 2003/10/19 03:46:49 livewire Exp $ - - -depend() { - need bootmisc localmount -} - -start() { - # Loop over every line in /etc/modules.autoload. - (cat /etc/modules.autoload; echo) | # make sure there is a LF at the end - while read module args - do - case "${module}" in - \#*|"") continue ;; - esac - ebegin " Loading module ${module}" - modprobe ${module} ${args} &>/dev/null - eend $? " Failed to load ${module}" -done -} - - -# vim:ts=4 diff --git a/src/livecd/profiles/lw-ut2003/aux-files/net b/src/livecd/profiles/lw-ut2003/aux-files/net deleted file mode 100644 index fb2c3b107c..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/net +++ /dev/null @@ -1,35 +0,0 @@ -# /etc/conf.d/net: -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw-ut2003/aux-files/Attic/net,v 1.1 2003/10/19 03:46:49 livewire Exp $ - -# Global config file for net.* rc-scripts - -# This is basically the ifconfig argument without the ifconfig $iface -# -#iface_eth0="192.168.0.2 broadcast 192.168.0.255 netmask 255.255.255.0" -#iface_eth1="207.170.82.202 broadcast 207.0.255.255 netmask 255.255.0.0" - -# For DHCP set iface_eth? to "dhcp" -# For passing options to dhcpcd use dhcpcd_eth? -# -iface_eth0="dhcp" -iface_eth1="dhcp" -#dhcpcd_eth0="..." - -# For adding aliases to a interface -# -#alias_eth0="192.168.0.3 192.168.0.4" - -# NB: The next is only used for aliases. -# -# To add a custom netmask/broadcast address to created aliases, -# uncomment and change accordingly. Leave commented to assign -# defaults for that interface. -# -#broadcast_eth0="192.168.0.255 192.168.0.255" -#netmask_eth0="255.255.255.0 255.255.255.0" - - -# For setting the default gateway -# -#gateway="eth0/192.168.0.1" - diff --git a/src/livecd/profiles/lw-ut2003/aux-files/profile b/src/livecd/profiles/lw-ut2003/aux-files/profile deleted file mode 100644 index 02da4835c1..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/profile +++ /dev/null @@ -1,34 +0,0 @@ -# /etc/profile: -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw-ut2003/aux-files/Attic/profile,v 1.1 2003/10/19 03:46:49 livewire Exp $ - -if [ -e "/etc/profile.env" ] -then - source /etc/profile.env -fi - -#077 would be more secure, but 022 is generally quite realistic -umask 022 -alias cp='cp -i' -alias ls='ls --color' -alias mv='mv -i' -alias pico='nano -w' -alias rm='rm -i' -if [ `/usr/bin/whoami` = 'root' ] -then - if [ "$SHELL" = '/bin/bash' ] || [ "$SHELL" = '/bin/sh' ] - then - export PS1='\[\033[01;31m\]\h \[\033[01;34m\]\W \$ \[\033[00m\]' - fi - export PATH="/bin:/sbin:/usr/bin:/usr/sbin:${ROOTPATH}" -else - if [ "$SHELL" = '/bin/bash' ] || [ "$SHELL" = '/bin/sh' ] - then - export PS1='\[\033[01;32m\]\u@\h \[\033[01;34m\]\W \$ \[\033[00m\]' - fi - export PATH="/bin:/usr/bin:${PATH}" -fi -unset ROOTPATH - -if [ -z "$INPUTRC" -a ! -f "$HOME/.inputrc" ]; then - export INPUTRC="/etc/inputrc" -fi diff --git a/src/livecd/profiles/lw-ut2003/aux-files/rc b/src/livecd/profiles/lw-ut2003/aux-files/rc deleted file mode 100644 index 0d2fa0e079..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/rc +++ /dev/null @@ -1,521 +0,0 @@ -#!/bin/bash -# Copyright 1999-2003 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw-ut2003/aux-files/Attic/rc,v 1.1 2003/10/19 03:46:49 livewire Exp $ - - -trap ":" INT QUIT TSTP -source /sbin/functions.sh -umask 022 - -try() { - local retval=0 - # This works fine in test, but real life booting, fails for mounting /proc - # if we only check $? for instance ... We thus need to [ -n "${errstr}" ] - # as well. - local errstr - errstr="`(eval $*) 2>&1 >/dev/null`" - retval=$? - if [ "${retval}" -ne 0 ] || \ - ([ -n "`echo "$*" | gawk '/mount/ { print "yes" }'`" -a -n "${errstr}" ]) - then - echo -e "${ENDCOL}${NORMAL}[${BAD} oops ${NORMAL}]" - echo - eerror "The \"${1}\" command failed with error:" - echo - echo "${errstr#*: }" - echo - eerror "Since this is a critical task, startup cannot continue." - echo - /sbin/sulogin ${CONSOLE} - einfo "Unmounting filesystems" - /bin/mount -a -o remount,ro & >/dev/null - einfo "Rebooting" - /sbin/reboot -f - fi - return ${retval} -} - -# Check that $svcdir exists ... -check_statedir() { - if [ ! -d "${svcdir}" ] - then - if ! mkdir -p "${svcdir}" &> /dev/null - then - echo - eerror "For Gentoo Linux to function properly, \"${svcdir}\" need to exist." - eerror "Please mount your root partition read/write, and execute:" - echo - eerror " # mkdir -p ${svcdir}" - echo; echo - /sbin/sulogin ${CONSOLE} - einfo "Unmounting filesystems" - /bin/mount -a -o remount,ro & >/dev/null - einfo "Rebooting" - /sbin/reboot -f - fi - fi -} - -# Save $1 -argv1="$1" -# First time boot stuff goes here. Note that 'sysinit' is an internal runlevel -# used to bring up local filesystems, and should not be started with /sbin/rc -# directly ... -if [ "${RUNLEVEL}" = "S" -a "${argv1}" = "sysinit" ] -then - # Setup initial $PATH just in case - PATH="/bin:/sbin:/usr/bin:/usr/sbin:${PATH}" - - echo - echo -e "${GOOD}Gentoo Linux${GENTOO_VERS}; \e[34;01mhttp://www.gentoo.org/${NORMAL}" - echo -e " Copyright 2001-2003 Gentoo Technologies, Inc.; Distributed under the GPL" - echo - - ebegin "Mounting /proc"; \ - try mount -n /proc; \ - eend $? - - # Figure out the number scripts we are going to start for the progress meter :) - if [ -f /proc/splash ]; then - tscripts=`ls -1R /etc/runlevels/ | grep -c $` - nscripts=`ls -1R /etc/runlevels/ | grep -c '^\B'` - export sscripts=$((${tscripts} - ${nscripts})) - fi - - rc_splash "begin" 2> /dev/null - - if [ "$(get_KV)" -ge "$(KV_to_int '2.5.0')" -a -d /sys ] - then - ebegin "Mounting /sys" - mount -t sysfs none /sys - eend $? - fi - - # Check if the user disabled devfs - devfs="yes" - get_bootparam "nodevfs" - if [ "$?" -eq 0 ] - then - devfs="no" - fi - - # Fix weird bug where there is a /dev/.devfsd in a unmounted /dev - mymounts="`awk '($3 == "devfs") { print "yes"; exit 0 }' /proc/mounts`" - if [ -e "/dev/.devfsd" -a "${mymounts}" != "yes" ] - then - rm -f /dev/.devfsd - fi - - # With the new way, /dev can be mounted by the kernel ... - if [ "${devfs}" = "yes" -a ! -e "/dev/.devfsd" ] - then - mymounts="`awk '($2 == "devfs") { print "yes"; exit 0 }' /proc/filesystems`" - # Is devfs support compiled in? - if [ "${mymounts}" = "yes" ] - then - ebegin "Mounting devfs at /dev"; \ - try mount -n -t devfs none /dev; \ - eend $? - rc_splash "start" - else - clear - echo - einfo "The Gentoo Linux system initialization scripts have detected that your" - einfo "kernel has been compiled without DEVFS support. Because Gentoo Linux" - einfo "has been designed to work with DEVFS, it is required that you compile" - einfo "support for it into your kernel. Please read the 'Gentoo Linux from" - einfo "source (build) CD Installation Guide' at:" - echo - einfo " http://www.gentoo.org/doc/build.html" - echo - einfo "for more information on how to do this." - echo - read -t 15 -p "(hit Enter to continue or wait 15 seconds...)" - fi - fi - - # Need devfsd running now so that /dev/ram0 exists if we need it - mymounts="`awk '($3 == "devfs") { print "yes"; exit 0 }' /proc/mounts`" - if [ "${devfs}" = "yes" -a -e "/dev/.devfsd" -a \ - "${mymounts}" = "yes" ] - then - ebegin "Starting devfsd" - /sbin/devfsd /dev > /dev/null - eend $? - rc_splash "start" - fi - - # Mount either a ramdisk or tmpfs if requested. - # we do this to temp mount, until we can get /var mounted ... - tsvcdir="/mnt/.init.d" - - # Should we use tmpfs or a ramdisk for caching dependency and - # general initscript data? Note that the 'gentoo=tmpfs' kernel - # option should override most settings ... - if get_bootparam "tmpfs" || \ - [ "${svcmount}" = "yes" -a "${svcfstype}" = "tmpfs" ] - then - mkdir -p "${tsvcdir}" - - ebegin "Mounting tmpfs at ${tsvcdir}" - try mount -n -t tmpfs tmpfs "${tsvcdir}" \ - -o rw,mode=0644,size="${svcsize}"k - eend 0 - rc_splash "start" - - elif get_bootparam "ramfs" || \ - [ "${svcmount}" = "yes" -a "${svcfstype}" = "ramfs" ] - then - mkdir -p "${tsvcdir}" - - ebegin "Mounting ramdisk 0 at ${tsvcdir}" - try dd if=/dev/zero of=/dev/ram0 bs=1k count="${svcsize}" - try /sbin/mke2fs -i 1024 -vm0 /dev/ram0 "${svcsize}" - try mount -n -t ext2 /dev/ram0 "${tsvcdir}" -o rw - eend 0 - rc_splash "start" - fi - - if get_bootparam "adelie" - then - einfo "Server/Node low-level initialisation..." - - # Saving the kernel attributed hostname to a file for future - # initialisation selection: see /etc/init.d/switch. - cat /proc/sys/kernel/hostname > "${svcdir}/hostname" - - if checkserver - then - # For server we do pretty much a standard boot ... - einfo "Server detected." - else - # - # Low-level Node Initialisation - # - einfo "Node detected." - - init_node - fi - fi - - # If a Adelie server, or normal Gentoo box, init swap ... - if checkserver - then - # Swap needs to be activated *after* devfs has been mounted and *after* - # devfsd has been started, so that the fstab can be properly parsed - # and only if the server/Gentoo box is initialized ... - ebegin "Activating swap" - /sbin/swapon -a &> /dev/null - eend 0 - rc_splash "start" - fi - - # Set the console loglevel to 1 for a cleaner boot - # the logger should anyhow dump the ring-0 buffer at start to the - # logs, and that with dmesg can be used to check for problems - /bin/dmesg -n 1 - - # $BOOT can be used by rc-scripts to test if it is the first time - # the 'boot' runlevel is executed. Now also needed by some stuff in - # the 'sysinit' runlevel ... - export BOOT="yes" - - # We do not want to break compadibility, so we do not fully integrate - # these into /sbin/rc, but rather start them by hand ... - for x in checkroot hostname modules checkfs localmount - do - source "/etc/init.d/${x}" || error "Failed to source /etc/init.d/${x}" - start || eerror "Failed to start /etc/init.d/${x}" - - if [ "$?" -ne 0 ] - then - echo - eerror "One of more critical startup scripts failed to start!" - eerror "Please correct this, and reboot ..." - echo; echo - /sbin/sulogin ${CONSOLE} - einfo "Unmounting filesystems" - /bin/mount -a -o remount,ro & >/dev/null - einfo "Rebooting" - /sbin/reboot -f - fi - rc_splash "start" - done - - # Check that $svcdir exists ... - check_statedir - - # Since we are using tmpfs or ramfs, just bin to $tsvcdir to $svcdir - if get_bootparam "tmpfs" || get_bootparam "ramfs" || [ "${svcmount}" = "yes" ] - then - mount --bind "${tsvcdir}" "${svcdir}" - fi - - # Clear $svcdir from stale entries - rm -rf "${svcdir}"/* - - # Save our bootsplash variables if needed :) - save_splash_info - - # Update the dependency cache - /sbin/depscan.sh - - # Now that the dependency cache are up to date, make sure these - # are marked as started ... - for x in checkroot hostname modules checkfs localmount - do - ln -snf "/etc/init.d/${x}" "${svcdir}/started/${x}" - done - -fi # Sysinit ends here - -if [ "${RUNLEVEL}" = "S" -a "${argv1}" = "boot" ] -then - # $BOOT can be used by rc-scripts to test if it is the first time - # the 'boot' runlevel is executed - export BOOT="yes" - - # Fix our bootsplash variables - get_splash_info - - rc_splash "start" - -fi - -if [ "${argv1}" = "sysinit" ] -then - exit 0 -fi - -if [ -z "${argv1}" ] -then - if [ -f "${svcdir}/softlevel" ] - then - export SOFTLEVEL="`cat ${svcdir}/softlevel`" - - # Fix our bootsplash variables - get_splash_info - - rc_splash "start" - else - export SOFTLEVEL="boot" - fi -else - export SOFTLEVEL="${argv1}" -fi - -if [ ! -f "${svcdir}/softlevel" ] -then - echo "${SOFTLEVEL}" > "${svcdir}/softlevel" -fi - -# For keeping a list of services that fails during boot/halt -if [ ! -d "${svcdir}/failed" ] -then - install -d -m0755 "${svcdir}/failed" -else - rm -rf "${svcdir}"/failed/* -fi - -if [ "${SOFTLEVEL}" = "reboot" -o "${SOFTLEVEL}" = "shutdown" ] -then - - # Figure out the number scripts we are going to stop for the progress meter :) - if [ -f /proc/splash ]; then - tscripts=`ls -1R ${svcdir}/started | grep -c $` - export cscripts=$((${tscripts} - 1)) - fi - - myscripts="" - - export HALT="${SOFTLEVEL}" - -elif [ ! -d "/etc/runlevels/${SOFTLEVEL}" ] -then - eerror "ERROR: runlevel ${SOFTLEVEL} does not exist; exiting..." - exit 1 -else - myscripts="" - if [ "${SOFTLEVEL}" != "boot" ] - then - # Normal runlevels *include* boot scripts - mylevels="$(dolisting "/etc/runlevels/${SOFTLEVEL}/")" - mylevels="${mylevels} $(dolisting /etc/runlevels/boot/)" - else - # Non-normal runlevels don't include boot scripts as default - mylevels="$(dolisting "/etc/runlevels/${SOFTLEVEL}/")" - fi - for x in ${mylevels} - do - if [ -L "${x}" ] - then - myscripts="${myscripts} ${x##*/}" - fi - done -fi - -# The softscripts dir contains all scripts that belong to the -# runlevel specified in ${svcdir}/softlevel -# It needs to be a new directory, else when stopping the services -# and the old directory is not intact, things get broken - -install -d -m0755 "${svcdir}/softscripts.new" - -for x in ${myscripts} -do - if [ ! -e "/etc/init.d/${x}" ] - then - ewarn "WARNING: /etc/init.d/${x} missing; skipping..." - continue - fi - # The -f eliminates a warning if the symlink already exists, - # which can happen if a service is in both the boot level and - # the current "normal" runlevel - ln -snf "/etc/init.d/${x}" "${svcdir}/softscripts.new/${x}" -done - -dep_stop() { - local x="" - local needsme="" - local myservice="" - local depservice="" - - [ ! -L "$1" ] && continue - if [ ! -e "$1" ] - then - # Remove dud symlinks - rm -f "$1" - continue - fi - myservice="${1##*/}" - - if [ ! -L "${svcdir}/softscripts.new/${myservice}" ] - then - # Candidate for zapping - - # Should not work for 'use' - if [ ! -d "${svcdir}/need/${myservice}" ] - then - # Nothing depends on me - if [ -L "${svcdir}/started/${myservice}" ] - then - "$1" stop - fi - else - # Something may depend on me - needsme=0 - for dep in $(dolisting "${svcdir}/need/${myservice}/") - do - if [ -L "${svcdir}/softscripts.new/${dep##*/}" -a -e "${dep}" ] - then - # This dep is valid - needsme=1 - break - fi - done - if [ "${needsme}" -eq 0 ] - then - if [ -L "${svcdir}/started/${myservice}" ] - then - "$1" stop - fi - fi - fi - fi -} - -# Stop services -for i in $(dolisting "${svcdir}/started/") -do - dep_stop "${i}" -# echo "dep_stop used" -done - -# Only change softlevel AFTER all the services have been stopped, -# else they will not get the depend's right (wrong SOFTLEVEL) - -echo "${SOFTLEVEL}" > "${svcdir}/softlevel" - -if [ "${SOFTLEVEL}" = "reboot" -o "${SOFTLEVEL}" = "shutdown" ] -then - source /sbin/functions.sh - - # Make sure that our $svcdir are clean for next reboot ... - rm -rf "${svcdir}"/* - - source /etc/init.d/halt.sh - - if [ "${SOFTLEVEL}" = "reboot" ] - then - source /etc/init.d/reboot.sh - else - source /etc/init.d/shutdown.sh - fi - # Should never get here - exit 0 -fi - -# Move the old softscritps directory to a different one -# and make the new softscripts directory the current - -mv -f "${svcdir}/softscripts" "${svcdir}/softscripts.old" -mv -f "${svcdir}/softscripts.new" "${svcdir}/softscripts" - -dep_start() { - local x="" - local myservice="" - local depservice="" - - if [ ! -L "$1" ] - then - continue - fi - # Only start a script if it isn't already running - myservice="${1##*/}" - if [ ! -L "${svcdir}/started/${myservice}" ] - then - "$1" start - rc_splash "start" - fi -} - -# Fix our bootsplash variables -get_splash_info - -rc_splash "start" - -# Start scripts -for i in $(dolisting "${svcdir}/softscripts/") -do - dep_start "${i}" - rc_splash "${i} start" -done - -# Clean the old runlevel -rm -rf "${svcdir}/softscripts.old" &> /dev/null - -# Depends gets nuked, so update them -# (this problem should be solved now, but i think it will be a good idea -# to recreate the deps after a change in runlevel) - -#/sbin/depscan.sh &>/dev/null - -# We want devfsd running after a change of runlevel (this is mostly if we return -# from runlevel 'single') -if [ -z "`ps --no-heading -C 'devfsd'`" -a \ - -n "`gawk '/\/dev devfs/ { print }' /proc/mounts 2> /dev/null`" ] -then - /sbin/devfsd /dev &> /dev/null -fi - -# Runlevel end, so clear stale fail list -rm -rf "${svcdir}/failed" &> /dev/null - -# If we were in the boot runlevel, it is done now ... -[ -n "${BOOT}" ] && unset BOOT - -# Save our bootsplash variables if needed :) -save_splash_info - -# vim:ts=4 diff --git a/src/livecd/profiles/lw-ut2003/aux-files/rc.sbin b/src/livecd/profiles/lw-ut2003/aux-files/rc.sbin deleted file mode 100644 index 497c37072d..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/rc.sbin +++ /dev/null @@ -1,443 +0,0 @@ -#!/bin/bash -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw-ut2003/aux-files/Attic/rc.sbin,v 1.1 2003/10/19 03:46:49 livewire Exp $ - - -trap ":" INT QUIT TSTP -source /sbin/functions.sh -umask 022 - -try() { - local retval=0 - # this works fine in test, but real life booting, fails for mounting /proc - # for instance, if we only check $?, thus we need to [ -n "${errstr}" ] - # as well - local errstr - errstr="$((eval $*) 2>&1 >/dev/null)" - retval=$? - if [ "${retval}" -ne 0 ] || \ - ([ -n "$(echo $* | egrep 'mount')" -a -n "${errstr}" ]) - then - echo -e "${ENDCOL}${NORMAL}[${BAD} oops ${NORMAL}]" - echo - eerror "The \"${1}\" command failed with error:" - echo - echo "${errstr#*: }" - echo - eerror "Since this is a critical task, startup cannot continue." - echo - /sbin/sulogin ${CONSOLE} - /sbin/reboot -f - fi - return ${retval} -} - -# save $1 -argv1="$1" - -# first time boot stuff goes here -if [ "${RUNLEVEL}" = "S" -a "${argv1}" = "boot" ] -then - # setup initial $PATH just in case - PATH="/bin:/sbin:/usr/bin:/usr/sbin:${PATH}" - - echo -e "${GOOD}Gentoo Linux${GENTOO_VERS}; \e[34;01mhttp://www.gentoo.org/${NORMAL}" - echo -e " Copyright 2001-2002 Gentoo Technologies, Inc.; Distributed under the GPL" - - ebegin "Mounting /proc"; \ - try mount -n /proc; \ - eend $? - - ebegin "Starting metalog" - start-stop-daemon --start --quiet --exec /usr/sbin/metalog \ - -- -p /var/run/metalog.pid --daemonize ${METALOG_OPTS} - eend $? "Failed to start metalog" - - # check if the user disabled devfs - devfs="yes" - get_bootparam "nodevfs" - if [ "$?" -eq 0 ] - then - devfs="no" - fi - - # fix weird bug where there is a /dev/.devfsd in a unmounted /dev - mymounts="$(awk '$3 ~ "devfs" { print $0 }' /proc/mounts)" - if [ -e /dev/.devfsd -a -z "${mymounts}" ] - then - rm -f /dev/.devfsd &>/dev/null - fi - - # with the new way, /dev can be mounted by the kernel ... - if [ "${devfs}" = "yes" -a ! -e /dev/.devfsd ] - then - mymounts="$(awk '$2 ~ "devfs" { print $0 }' /proc/filesystems)" - # is devfs support compiled in? - if [ -n "${mymounts}" ] - then - ebegin "Mounting devfs at /dev"; \ - try mount -n -t devfs none /dev; \ - eend $? - else - clear - echo - einfo "The Gentoo Linux system initialization scripts have detected that your" - einfo "kernel has been compiled without DEVFS support. Because Gentoo Linux" - einfo "has been designed to work with DEVFS, it is required that you compile" - einfo "support for it into your kernel. Please read the 'Gentoo Linux from" - einfo "source (build) CD Installation Guide' at:" - echo - einfo " http://www.gentoo.org/doc/build.html" - echo - einfo "for more information on how to do this." - echo - read -t 15 -p "(hit Enter to continue or wait 15 seconds...)" - fi - fi - - # need devfsd running now so that /dev/ram0 exists if we need it - mymounts="$(cat /proc/mounts)" - if [ "${devfs}" = "yes" -a -e /dev/.devfsd -a \ - "${mymounts/devfs//}" != "${mymounts}" ] - then - ebegin "Starting devfsd" - /sbin/devfsd /dev &>/dev/null - eend $? - fi - - if [ ! -d ${svcdir} ] - then - echo - eerror "For Gentoo Linux to function properly, \"${svcdir}\" need to exist." - eerror "Please mount your root partition read/write, and execute:" - echo - eerror " # mkdir -p ${svcdir}" - echo - echo - /sbin/sulogin ${CONSOLE} - mount -a -o remount,ro &>/dev/null - /sbin/reboot -f - fi - - # mount either a ramdisk or tmpfs and do dep scan - - # should we use tmpfs or a ramdisk ? - if ! get_bootparam "notmpfs" && \ - ([ "${svcfstype}" = "tmpfs" -o "${svcfstype}" != "ramfs" ]) - then - ebegin "Mounting tmpfs at ${svcdir}"; \ - try mount -n -t tmpfs tmpfs ${svcdir} \ - -o rw,mode=0644,size=${svcsize}k; \ - eend 0 - else - ebegin "Mounting ramdisk 0 at ${svcdir}"; \ - try dd if=/dev/zero of=/dev/ram0 bs=1k count=${svcsize}; \ - try /sbin/mke2fs -i 1024 -vm0 /dev/ram0 ${svcsize}; \ - try mount -n -t ext2 /dev/ram0 ${svcdir} -o rw; \ - eend 0 - fi - - if ! get_bootparam "notmpfs" && get_bootparam "ngpt" - then - # POSIX shared memory support - ebegin "Mounting POSIX shared memory" - mkdir -p /dev/shm - try mount -n -t tmpfs tmpfs /dev/shm - eend $? - - # NGPT support (http://www-124.ibm.com/developerworks/oss/pthreads/) - if [ -x /usr/bin/ngptinit ] - then - ebegin "Initializing NGPT" - /usr/bin/ngptinit &> /dev/null || : - eend $? - fi - fi - - /sbin/depscan.sh - - # Saving the kernel attributed hostname to a file for future - # initialisation selection: see /etc/init.d/switch. - get_bootparam "adelie" && cat /proc/sys/kernel/hostname > ${svcdir}/hostname - - get_bootparam "adelie" && einfo "Server/Node low-level initialisation..." - if checkserver - then - get_bootparam "adelie" && einfo "Server detected." - - # swap needs to be activated *after* devfs has been mounted and *after* - # devfsd has been started, so that the fstab can be properly parsed - # and only if the server is initialized - ebegin "Activating swap" - /sbin/swapon -a &>/dev/null - eend 0 - else - # - # Low-level Node Initialisation - # - einfo "Node detected." - ebegin "Importing local userspace on node" - - try mount -t tmpfs none ${shmdir} - - for DIR in /etc /var /root; - do - - if grep -q -v "^${DIR}[[:space:]]" /etc/exports - then - mount -o nolock -n server:${DIR} ${DIR} - fi - - if [ -e /etc/conf.d/exclude/${DIR} ] - then - find ${DIR} -type d | grep -v -f /etc/conf.d/exclude/${DIR} > ${shmdir}/${DIR}.lst - else - find ${DIR} -type d > ${shmdir}/${DIR}.lst - fi - - for SUBDIR in $(cat ${shmdir}/${DIR}.lst); - do - mkdir ${shmdir}/${SUBDIR} - chmod --reference=${SUBDIR} ${shmdir}/${SUBDIR} - cp -dp ${SUBDIR}/* ${shmdir}/${SUBDIR} &>/dev/null - done - - if [ -e /etc/conf.d/exclude/${DIR} ] - then - for EMPTYDIR in $(cat /etc/conf.d/exclude/${DIR}); - do - mkdir ${shmdir}/${EMPTYDIR} - chmod --reference=${SUBDIR} ${shmdir}/${SUBDIR} - done - fi - - umount -n ${DIR} > /dev/null - mount -n -o bind ${shmdir}/${DIR} ${DIR} - done - - mkdir ${shmdir}/tmp - chmod 0777 ${shmdir}/tmp - mount -n -o bind ${shmdir}/tmp /tmp - - cat /proc/mounts > /etc/mtab - - cp -f /etc/inittab.node /etc/inittab - [ -e /etc/fstab.node ] && cp -f /etc/fstab.node /etc/fstab - killall -1 init - - eend 0 - fi - - # set the console loglevel to 1 for a cleaner boot - # the logger should anyhow dump the ring-0 buffer at start to the - # logs, and that with dmesg can be used to check for problems - - /bin/dmesg -n 1 - - # $BOOT can be used by rc-scripts to test if it is the first time - # the 'boot' runlevel is executed - - export BOOT="yes" - -fi # boot ends here - -if [ -z "${argv1}" ] -then - if [ -f ${svcdir}/softlevel ] - then - export SOFTLEVEL="$(cat ${svcdir}/softlevel)" - else - export SOFTLEVEL="boot" - fi -else - export SOFTLEVEL="${argv1}" -fi - -if [ ! -f ${svcdir}/softlevel ] -then - echo "${SOFTLEVEL}" > ${svcdir}/softlevel -fi - -# for keeping a list of services that fails during boot/halt -if [ ! -d ${svcdir}/failed ] -then - install -d -m0755 ${svcdir}/failed -else - rm -rf ${svcdir}/failed/* -fi - -if [ "${SOFTLEVEL}" = "reboot" -o "${SOFTLEVEL}" = "shutdown" ] -then - myscripts="" -elif [ ! -d /etc/runlevels/${SOFTLEVEL} ] -then - eerror "ERROR: runlevel ${SOFTLEVEL} does not exist; exiting..." - exit 1 -else - myscripts="" - if [ "${SOFTLEVEL}" != "boot" ] - then - # normal runlevels *include* boot scripts - mylevels="$(dolisting /etc/runlevels/${SOFTLEVEL}/)" - mylevels="${mylevels} $(dolisting /etc/runlevels/boot/)" - else - # non-normal runlevels don't include boot scripts as default - mylevels="$(dolisting /etc/runlevels/${SOFTLEVEL}/)" - fi - for x in ${mylevels} - do - if [ -L "${x}" ] - then - myscripts="${myscripts} ${x##*/}" - fi - done -fi - -# the softscripts dir contains all scripts that belong to the -# runlevel specified in ${svcdir}/softlevel -# it needs to be a new directory, else when stopping the services -# and the old directory is not intact, things get broken - -install -d -m0755 ${svcdir}/softscripts.new - -for x in ${myscripts} -do - if [ ! -e "/etc/init.d/${x}" ] - then - ewarn "WARNING: /etc/init.d/${x} missing; skipping..." - continue - fi - # the -f eliminates a warning if the symlink already exists, - # which can happen if a service is in both the boot level and - # the current "normal" runlevel - ln -sf /etc/init.d/${x} ${svcdir}/softscripts.new/${x} -done - -dep_stop() { - local x="" - local needsme="" - local myservice="" - local depservice="" - [ ! -L $1 ] && continue - if [ ! -e $1 ] - then - # remove dud symlinks - rm $1 - continue - fi - myservice="${1##*/}" - - if [ ! -L "${svcdir}/softscripts.new/${myservice}" ] - then - # candidate for zapping - - # should not work for 'use' - if [ ! -d "${svcdir}/need/${myservice}" ] - then - # nothing depends on me - if [ -L "${svcdir}/started/${myservice}" ] - then - $1 stop - fi - else - # something may depend on me - needsme=0 - for dep in $(dolisting ${svcdir}/need/${myservice}/) - do - if [ -L "${svcdir}/softscripts.new/${dep##*/}" -a -e ${dep} ] - then - # this dep is valid - needsme=1 - break - fi - done - if [ "${needsme}" -eq 0 ] - then - if [ -L "${svcdir}/started/${myservice}" ] - then - $1 stop - fi - fi - fi - fi -} - -# stop services -for i in $(dolisting ${svcdir}/started/) -do - dep_stop ${i} -done - -# Only change softlevel AFTER all the services have been stopped, -# else they will not get the depend's right (wrong SOFTLEVEL) - -echo "${SOFTLEVEL}" > ${svcdir}/softlevel - -if [ "${SOFTLEVEL}" = "reboot" -o "${SOFTLEVEL}" = "shutdown" ] -then - source /sbin/functions.sh - source /etc/init.d/halt.sh - if [ "${SOFTLEVEL}" = "reboot" ] - then - source /etc/init.d/reboot.sh - else - source /etc/init.d/shutdown.sh - fi - # should never get here - exit 0 -fi - -# move the old softscritps directory to a different one -# and make the new softscripts directory the current - -mv ${svcdir}/softscripts ${svcdir}/softscripts.old &>/dev/null -mv ${svcdir}/softscripts.new ${svcdir}/softscripts &>/dev/null - -dep_start() { - local x="" - local myservice="" - local depservice="" - if [ ! -L $1 ] - then - continue - fi - # only start a script if it isn't already running - myservice="${1##*/}" - if [ ! -L "${svcdir}/started/${myservice}" ] - then - $1 start - fi -} - -# start scripts -for i in $(dolisting ${svcdir}/softscripts/) -do - dep_start ${i} -done - -# clean the old runlevel -rm -rf ${svcdir}/softscripts.old &>/dev/null - -# depends gets nuked, so update them -# (this problem should be solved now, but i think it will be a good idea -# to recreate the deps after a change in runlevel) - -#/sbin/depscan.sh &>/dev/null - -# we want devfsd running after a change of runlevel (this is mostly if we return -# from runlevel 'single') -if [ -z "$(ps -A | egrep 'devfsd')" -a \ - -n "$(cat /proc/mounts | egrep '/dev devfs')" ] -then - /sbin/devfsd /dev &>/dev/null -fi - -# runlevel end, so clear stale fail list -rm -rf ${svcdir}/failed &>/dev/null - -# if we were in the boot runlevel, it is done now ... -[ -n "${BOOT}" ] && unset BOOT - - -# vim:ts=4 diff --git a/src/livecd/profiles/lw-ut2003/aux-files/resolv.conf b/src/livecd/profiles/lw-ut2003/aux-files/resolv.conf deleted file mode 100644 index ab1cae14ce..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/resolv.conf +++ /dev/null @@ -1 +0,0 @@ -nameserver ##NS1## diff --git a/src/livecd/profiles/lw-ut2003/aux-files/root.tar.bz2 b/src/livecd/profiles/lw-ut2003/aux-files/root.tar.bz2 Binary files differdeleted file mode 100644 index 6041ce3fed..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/root.tar.bz2 +++ /dev/null diff --git a/src/livecd/profiles/lw-ut2003/aux-files/splash b/src/livecd/profiles/lw-ut2003/aux-files/splash deleted file mode 100644 index 56e748a0b4..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/splash +++ /dev/null @@ -1,71 +0,0 @@ -#!/bin/bash -# -# splash.sh - script to paint progress bar during -# system startup/shutdown. This script is solely run -# by the init scripts (shell function rc_splash) -# -# (w) 2002-2003 Stefan Reinauer, <stepan@suse.de> -# Modified for Gentoo by Jay Pfeifer <pfeifer@gentoo.org> -# It's licensed under GPL, of course. -# -# this script expects the following environment variables: -# sscripts = number of start scripts to be executed for runlevel change -# kscripts = number of stop scripts to be executed for runlevel change -# progress = number of currently executed start/stop script - -# execute splash binary utility because we are a wrapper: -if [ "$1" == "-s" -o "$1" == "-u" -o "$1" == "-n" -o "$1" == "-f" ]; then - exec /sbin/splash.bin $* -else - ( exec /sbin/splash.bin "$*" ) -fi - -# assertions -test -r /proc/splash || exit 0 -sparam=$1 - -# - -function box() { true; } # ignore box descriptions in the config file - -if [ -f /etc/bootsplash/default/config/bootsplash-`fbresolution`.cfg ]; then - . /etc/bootsplash/default/config/bootsplash-`fbresolution`.cfg -fi - -# Print text string.. -if [ "${sparam}" = "begin" ]; then - fbtruetype.static -x ${text_x} -y ${text_y} -t ${text_color} -s ${text_size} \ - "Booting the system... Press F2 for verbose mode" 2> /dev/null - export startnum=$(( ${sscripts} + 5 )) - -fi - -if [ "${sparam}" = "end" ]; then - fbtruetype.static -x ${text_x} -y ${text_y} -t ${text_color} -s ${text_size} \ - "Shutting down the system... Press F2 for verbose mode" 2> /dev/null - export stopnum=$(( ${cscripts} / 4 )) -fi - -# Paint progressbar.. -#if [ "$1" = "start" ]; then -if [ "${#sparam}" -ge "5" ] && \ - [ `expr "${sparam}" : '.*\(.....\)'` = "start" ]; then - export startnum=$(( ${sscripts} + 5 )) - echo "show $(( 65534 * ( ${progress} + 1 ) / ${startnum} ))" > /proc/splash - #echo ${progress} ${sscripts} ${startnum} -# fbtruetype -x ${text_x} -y $((${text_y} + 70)) -t ${text_color} -s ${text_size} \ -# " " 2> /dev/null -# fbtruetype -x ${text_x} -y $((${text_y} + 70)) -t ${text_color} -s ${text_size} \ -# "$1" 2> /dev/null -fi -#if [ "$1" = "stop" ]; then -if [ "${#sparam}" -ge "4" ] && \ - [ `expr "${sparam}" : '.*\(....\)'` = "stop" ]; then - export stopnum=$(( ${cscripts} / 4 )) - echo "show $(( 65534 * ( ${progress} + 1 ) / ${stopnum} ))" > /proc/splash - #echo ${progress} ${sscripts} ${stopnum} -# fbtruetype -x ${text_x} -y $((${text_y} + 70)) -t ${text_color} -s ${text_size} \ -# " " 2> /dev/null -# fbtruetype -x ${text_x} -y $((${text_y} + 70)) -t ${text_color} -s ${text_size} \ -# "$1" 2> /dev/null -fi diff --git a/src/livecd/profiles/lw-ut2003/aux-files/splash.bin b/src/livecd/profiles/lw-ut2003/aux-files/splash.bin Binary files differdeleted file mode 100644 index be47b88ee5..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/splash.bin +++ /dev/null diff --git a/src/livecd/profiles/lw-ut2003/aux-files/splash.sh b/src/livecd/profiles/lw-ut2003/aux-files/splash.sh deleted file mode 100644 index a25b473471..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/splash.sh +++ /dev/null @@ -1,26 +0,0 @@ -# Prelim code to add bootsplash support to Gentoo :) -rc_splash() { - test -f /proc/splash || return 0 - if [ -n "`grep 'splash=silent' /proc/cmdline 2>/dev/null`" ]; then - /sbin/splash "$1" - export progress=$(( ${progress} + 1 )) - fi -} - -# Allows us to save variable info between runlevels (ie. rc iterations) -save_splash_info() { - if [ -f /proc/splash ]; then - echo ${sscripts} > ${svcdir}/sscripts.tmp - echo ${progress} > ${svcdir}/progress.tmp - fi -} - -# Retrieve splash state info -get_splash_info() { - if [ -f /proc/splash ]; then - export sscripts=`cat ${svcdir}/sscripts.tmp` - export progress=`cat ${svcdir}/progress.tmp` - fi -} - - diff --git a/src/livecd/profiles/lw-ut2003/aux-files/usleep b/src/livecd/profiles/lw-ut2003/aux-files/usleep Binary files differdeleted file mode 100644 index 4bee8c4bc1..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/usleep +++ /dev/null diff --git a/src/livecd/profiles/lw-ut2003/aux-files/xfree-nvidia b/src/livecd/profiles/lw-ut2003/aux-files/xfree-nvidia deleted file mode 100644 index 384c866ad7..0000000000 --- a/src/livecd/profiles/lw-ut2003/aux-files/xfree-nvidia +++ /dev/null @@ -1,290 +0,0 @@ -########################################################################## -# Sample XF86Config file for NVIDIA XFree86 drivers. -# -# Refer to the XF86Config(4/5) man page for details about the format of -# this file. -# -# Be sure to replace the monitor values with correct values for your -# monitor! -########################################################################## - - -Section "Files" - - RgbPath "/usr/X11R6/lib/X11/rgb" - FontPath "unix/:-1" - -EndSection - - -########################################################################## -# Server flags section. -########################################################################## - -Section "ServerFlags" - - # Uncomment this to cause a core dump at the spot where a signal is - # received. This may leave the console in an unusable state, but may - # provide a better stack trace in the core dump to aid in debugging - #NoTrapSignals - - # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence - # This allows clients to receive this key event. - #DontZap - - # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching - # sequences. This allows clients to receive these key events. - #DontZoom - - # This allows the server to start up even if the - # mouse device can't be opened/initialised. - AllowMouseOpenFail - -EndSection - - -########################################################################## -# Input devices -########################################################################## - -# -# Keyboard section -# -Section "InputDevice" - - Identifier "Keyboard1" - Driver "Keyboard" - Option "AutoRepeat" "250 30" - - Option "XkbRules" "xfree86" - Option "XkbModel" "pc105" - Option "XkbLayout" "us" - -EndSection - - -# -# Pointer section -# -Section "InputDevice" - - Identifier "Mouse1" - Driver "mouse" - Option "Protocol" "IMPS/2" - Option "Device" "/dev/input/mice" - Option "Buttons" "7" - Option "ZAxisMapping" "4 5" -EndSection - - -########################################################################## -# Module section -########################################################################## - -Section "Module" - - Load "dbe" - - # Load the glx module. - Load "glx" - - Load "extmod" - - Load "type1" - Load "freetype" -EndSection - - -########################################################################## -# Monitor section -########################################################################## - -Section "Monitor" - - Identifier "MyMonitor" - VendorName "Mitsubisi" - ModelName "Diamond Plus 120u" - - # be sure to replace these values with values appropriate for your - # monitor! -# HorizSync 31-82 -# VertRefresh 55-120 - -EndSection - - -########################################################################## -# Graphics device section(s) -########################################################################## - -Section "Device" - Identifier "NV AGP" - VendorName "nvidia" - Driver "nvidia" - # update this with the PCI id of your card. Consult the output - # of the 'lspci' command. -# BusID "PCI:1:0:0" - Option "NoLogo" "1" -# Option "NoDDC" "1" -EndSection - -Section "Device" - Identifier "NV PCI" - VendorName "nvidia" - Driver "nvidia" - # update this with the PCI id of your card. Consult the output - # of the 'lspci' command. - BusID "PCI:0:13:0" -EndSection - -Section "Device" - Identifier "NV AGP TwinView" - VendorName "nvidia" - Driver "nvidia" - # update this with the PCI id of your card. Consult the output - # of the 'lspci' command. - BusID "PCI:1:0:0" - - # sample twinview setup - Option "TwinView" - # be sure to replace the HorizSync and VertRefresh with correct values - # for your monitor! - Option "SecondMonitorHorizSync" "31-82" - Option "SecondMonitorVertRefresh" "55-120" - Option "TwinViewOrientation" "RightOf" - Option "MetaModes" "1280x1024,1280x1024; 1024x768,1024x768" - Option "ConnectedMonitor" "crt,crt" -EndSection - - -########################################################################## -# Screen sections -########################################################################## - -# -# screen section for an nvidia AGP card -# -Section "Screen" - Identifier "Screen AGP" - Device "NV AGP" - Monitor "MyMonitor" - DefaultColorDepth 24 - DefaultFbBpp 32 - Subsection "Display" - Depth 8 - Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x400" - EndSubsection - Subsection "Display" - Depth 16 - Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - Subsection "Display" - Depth 24 - Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - -EndSection - - -# -# screen section for an nvidia PCI card -# -Section "Screen" - Identifier "Screen PCI" - Device "NV PCI" - Monitor "MyMonitor" - DefaultColorDepth 24 - Subsection "Display" - Depth 8 - Modes "1280x1024" "1024x768" "800x600" "640x400" - EndSubsection - Subsection "Display" - Depth 16 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - Subsection "Display" - Depth 24 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection -EndSection - -# -# screen section for an nvidia AGP TwinView card -# (look at the appropriate Device section) -# -Section "Screen" - Identifier "Screen AGP TwinView" - Device "NV AGP TwinView" - Monitor "MyMonitor" - DefaultColorDepth 24 - Subsection "Display" - Depth 8 - Modes "1280x1024" "1024x768" "800x600" "640x400" - EndSubsection - Subsection "Display" - Depth 16 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - Subsection "Display" - Depth 24 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection -EndSection - - -########################################################################## -# ServerLayout sections -# (invoke using the '-layout' option of 'startx'. -########################################################################## - -# -# just one agp card -# -Section "ServerLayout" - Identifier "AGP" - Screen "Screen AGP" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# just one pci card -# -Section "ServerLayout" - Identifier "PCI" - Screen "Screen PCI" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# 2 cards, non twinview -# -Section "ServerLayout" - Identifier "Both" - Screen "Screen AGP" - Screen "Screen PCI" LeftOf "Screen AGP" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# just one agp twinview card -# -Section "ServerLayout" - Identifier "AGPTwinView" - Screen "Screen AGP TwinView" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# 2 cards, one agp twinview and one pci (3 monitors total) -# -Section "ServerLayout" - Identifier "BothTwinView" - Screen "Screen AGP TwinView" - Screen "Screen PCI" LeftOf "Screen AGP TwinView" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection diff --git a/src/livecd/profiles/lw-ut2003/bash_profile b/src/livecd/profiles/lw-ut2003/bash_profile deleted file mode 100644 index cd8b190774..0000000000 --- a/src/livecd/profiles/lw-ut2003/bash_profile +++ /dev/null @@ -1,6 +0,0 @@ -#!/bin/bash -if [ -e /etc/startgame ] - then - rm -f /etc/startgame - /usr/sbin/x-setup -fi diff --git a/src/livecd/profiles/lw-ut2003/boot.msg b/src/livecd/profiles/lw-ut2003/boot.msg deleted file mode 100644 index dba36228ba..0000000000 --- a/src/livecd/profiles/lw-ut2003/boot.msg +++ /dev/null @@ -1,4 +0,0 @@ -17 gentoo.lss - -Gentoo Linux 1.4 http://www.gentoo.org/ RELEASE: 1.4-Release -Enter to boot; F2 for options. diff --git a/src/livecd/profiles/lw-ut2003/boot1.msg b/src/livecd/profiles/lw-ut2003/boot1.msg deleted file mode 100644 index f81f7531f7..0000000000 --- a/src/livecd/profiles/lw-ut2003/boot1.msg +++ /dev/null @@ -1,24 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - -Welcome .... - -Hold shift key while booting for options menu , Then press F2 for help diff --git a/src/livecd/profiles/lw-ut2003/bootsplash.cfg b/src/livecd/profiles/lw-ut2003/bootsplash.cfg deleted file mode 100644 index 7001611948..0000000000 --- a/src/livecd/profiles/lw-ut2003/bootsplash.cfg +++ /dev/null @@ -1,56 +0,0 @@ -# This is a bootsplash configuration file for -# theme SuSE, resolution 1024x768. See -# ftp://ftp.suse.com/pub/people/stepan/bootsplash for -# more information. Comments are welcome by stepan@suse.de - -# config file version -version=3 - -# should the picture be displayed? -state=1 - -# fgcolor is the text forground color. -# bgcolor is the text background (i.e. transparent) color. -fgcolor=7 -bgcolor=0 - -# (tx, ty) are the (x, y) coordinates of the text window in pixels. -# tw/th is the width/height of the text window in pixels. -tx=25 -ty=28 -tw=979 -th=629 - -# ttf message output parameters -text_x=220 -text_y=480 -text_size=18 -text_color=0xeef4ff - -# name of the picture file (full path recommended) -jpeg=/work/Linux/bootsplash-1024x768.jpg -#silentjpeg=/aa1024.jpg -silentjpeg=/ut-1024.jpg -progress_enable=1 - -# background -box silent noover 204 562 820 592 #04045498 -box silent inter 204 563 204 591 #ffffff #ffffff #526bb0 #526bb0 -box silent 204 563 820 591 #ffffff #ffffff #526bb0 #526bb0 -# black border -box silent 204 562 820 562 #313234 -box silent 204 592 820 592 #eef4ff -box silent 204 592 204 592 #313234 -box silent 820 592 820 592 #eef4ff - -# text box (left, top) -box 19 19 19 679 #313234 -box 19 19 1005 19 #313234 -# (right, bottom) -box 1005 19 1005 679 #eef4ff -box 19 679 1005 679 #eef4ff - -# box itself -box noover 20 20 1004 678 #04045498 - -overpaintok=1 diff --git a/src/livecd/profiles/lw-ut2003/ck-config b/src/livecd/profiles/lw-ut2003/ck-config deleted file mode 100644 index 407f35260d..0000000000 --- a/src/livecd/profiles/lw-ut2003/ck-config +++ /dev/null @@ -1,1233 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_LOLAT=y -# CONFIG_LOLAT_SYSCTL is not set -# CONFIG_M386 is not set -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M686 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -CONFIG_MK7=y -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -CONFIG_X86_WP_WORKS_OK=y -CONFIG_X86_INVLPG=y -CONFIG_X86_CMPXCHG=y -CONFIG_X86_XADD=y -CONFIG_X86_BSWAP=y -CONFIG_X86_POPAD_OK=y -# CONFIG_RWSEM_GENERIC_SPINLOCK is not set -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_X86_L1_CACHE_SHIFT=6 -CONFIG_X86_HAS_TSC=y -CONFIG_X86_GOOD_APIC=y -CONFIG_X86_USE_3DNOW=y -CONFIG_X86_PGE=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_F00F_WORKS_OK=y -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -CONFIG_PREEMPT=y -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set -CONFIG_X86_TSC=y -CONFIG_HAVE_DEC_LOCK=y - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -CONFIG_CARDBUS=y -CONFIG_TCIC=y -CONFIG_I82092=y -CONFIG_I82365=y - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -# CONFIG_CISS_SCSI_TAPE is not set -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -# CONFIG_CDROM_PKTCDVD is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -# CONFIG_BLK_DEV_IDESCSI is not set -CONFIG_IDE_TASK_IOCTL=y -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_CMD680 is not set -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -# CONFIG_PDC202XX_BURST is not set -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -# CONFIG_SCSI is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_BOOT is not set -# CONFIG_FUSION_ISENSE is not set -# CONFIG_FUSION_CTL is not set -# CONFIG_FUSION_LAN is not set - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -# CONFIG_IEEE1394_SBP2 is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -CONFIG_PCMCIA_IBMTR=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_AIRONET4500_CS=m - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=m - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -CONFIG_AGP_INTEL=y -CONFIG_AGP_I810=y -CONFIG_AGP_VIA=y -CONFIG_AGP_AMD=y -CONFIG_AGP_AMD_8151=y -CONFIG_AGP_SIS=y -CONFIG_AGP_ALI=y -CONFIG_AGP_SWORKS=y -CONFIG_DRM=y -# CONFIG_DRM_OLD is not set -CONFIG_DRM_NEW=y -CONFIG_DRM_TDFX=m -CONFIG_DRM_R128=m -CONFIG_DRM_RADEON=m -CONFIG_DRM_I810=m -CONFIG_DRM_I810_XFREE_41=y -CONFIG_DRM_I830=m -CONFIG_DRM_MGA=m -CONFIG_DRM_SIS=m - -# -# PCMCIA character devices -# -CONFIG_PCMCIA_SERIAL_CS=m -CONFIG_SYNCLINK_CS=m -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_SUPERMOUNT is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_DMAPI is not set -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_SOUND_ALI5455=m -CONFIG_SOUND_BT878=m -CONFIG_SOUND_CMPCI=m -# CONFIG_SOUND_CMPCI_FM is not set -# CONFIG_SOUND_CMPCI_MIDI is not set -# CONFIG_SOUND_CMPCI_JOYSTICK is not set -# CONFIG_SOUND_CMPCI_CM8738 is not set -CONFIG_SOUND_EMU10K1=m -# CONFIG_MIDI_EMU10K1 is not set -CONFIG_SOUND_FUSION=m -CONFIG_SOUND_CS4281=m -CONFIG_SOUND_ES1370=m -CONFIG_SOUND_ES1371=m -CONFIG_SOUND_ESSSOLO1=m -CONFIG_SOUND_MAESTRO=m -CONFIG_SOUND_MAESTRO3=m -CONFIG_SOUND_FORTE=m -CONFIG_SOUND_ICH=m -CONFIG_SOUND_RME96XX=m -CONFIG_SOUND_SONICVIBES=m -CONFIG_SOUND_TRIDENT=m -CONFIG_SOUND_MSNDCLAS=m -# CONFIG_MSNDCLAS_HAVE_BOOT is not set -CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin" -CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin" -CONFIG_SOUND_MSNDPIN=m -# CONFIG_MSNDPIN_HAVE_BOOT is not set -CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin" -CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin" -CONFIG_SOUND_VIA82CXXX=m -# CONFIG_MIDI_VIA82CXXX is not set -CONFIG_SOUND_OSS=m -# CONFIG_SOUND_TRACEINIT is not set -# CONFIG_SOUND_DMAP is not set -CONFIG_SOUND_AD1816=m -CONFIG_SOUND_SGALAXY=m -CONFIG_SOUND_ADLIB=m -CONFIG_SOUND_ACI_MIXER=m -CONFIG_SOUND_CS4232=m -CONFIG_SOUND_SSCAPE=m -CONFIG_SOUND_GUS=m -# CONFIG_SOUND_GUS16 is not set -# CONFIG_SOUND_GUSMAX is not set -CONFIG_SOUND_VMIDI=m -CONFIG_SOUND_TRIX=m -CONFIG_SOUND_MSS=m -CONFIG_SOUND_MPU401=m -CONFIG_SOUND_NM256=m -CONFIG_SOUND_MAD16=m -# CONFIG_MAD16_OLDCARD is not set -CONFIG_SOUND_PAS=m -# CONFIG_PAS_JOYSTICK is not set -CONFIG_SOUND_PSS=m -# CONFIG_PSS_MIXER is not set -# CONFIG_PSS_HAVE_BOOT is not set -CONFIG_SOUND_SB=m -CONFIG_SOUND_AWE32_SYNTH=m -CONFIG_SOUND_WAVEFRONT=m -CONFIG_SOUND_MAUI=m -CONFIG_SOUND_YM3812=m -CONFIG_SOUND_OPL3SA1=m -CONFIG_SOUND_OPL3SA2=m -CONFIG_SOUND_YMFPCI=m -# CONFIG_SOUND_YMFPCI_LEGACY is not set -CONFIG_SOUND_UART6850=m -CONFIG_SOUND_AEDSP16=m -# CONFIG_SC6600 is not set -# CONFIG_AEDSP16_SBPRO is not set -# CONFIG_AEDSP16_MSS is not set -# CONFIG_AEDSP16_MPU401 is not set -# CONFIG_SOUND_TVMIXER is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_UHCI=y -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=y -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -CONFIG_USB_HIDDEV=y -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -# CONFIG_USB_LCD is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/lw-ut2003/clean b/src/livecd/profiles/lw-ut2003/clean deleted file mode 100644 index 6a77a6f0c5..0000000000 --- a/src/livecd/profiles/lw-ut2003/clean +++ /dev/null @@ -1,55 +0,0 @@ -#!/bin/bash -if [ -z "$CD_BUILDCHROOT" ] -then - echo "Error: \$CD_BUILDCHROOT not defined." - exit 1 -fi - -#keep important C/C++/Java shared libraries -touch ${CD_BUILDCHROOT}/usr/lib/gcc-lib/*/*/*.so* -touch ${CD_BUILDCHROOT}/usr/lib/libstdc++* -touch ${CD_BUILDCHROOT}/etc/env.d/??gcc* - -mount_all -#remove extra build-related packages -chroot ${CD_BUILDCHROOT} /bin/bash -e <<EOF -source /etc/profile -emerge -C autoconf automake bin86 binutils libtool m4 bison ld.so make perl patch linux-headers man-pages || exit 1 -emerge -C sash bison flex gettext texinfo ccache addpatches man groff lib-compat gcc python miscfiles ucl || exit 1 -EOF -#detect chroot errors: -[ $? -ne 0 ] && chroot_die "problems cleaning packages" -umount_all - -#final cleanups -for x in /var/tmp/portage /var/db /var/empty /var/cache \ -/var/lock /tmp /usr/portage /usr/share/man /usr/share/info /usr/share/unimaps \ -/usr/include /usr/share/zoneinfo /usr/share/dict /usr/share/doc /usr/share/ss /usr/share/state /usr/share/texinfo \ -/var/tmp /usr/lib/python2.2 /usr/lib/portage /usr/share/gettext /usr/share/i18n /usr/share/rfc \ -/usr/X11R6/man /usr/X11R6/include /usr/X11R6/lib/X11/config /usr/X11R6/lib/X11/etc /usr/X11R6/lib/X11/doc -do - rm -rf ${CD_BUILDCHROOT}/${x}/* ${CD_BUILDCHROOT}/${x}/.* -done -#rm -rf ${CD_BUILDCHROOT}/usr/share/keymaps - -for x in /sbin/insmod.static /sbin/sln \ -/usr/X11R6/bin/Xnest \ -/usr/X11R6/bin/Xprt \ -/usr/X11R6/bin/Xvfb -do - rm ${CD_BUILDCHROOT}/${x} -done - -#clean up the kernel source tree... -rm -rf ${CD_BUILDCHROOT}/usr/src/linux* -rm -rf ${CD_BUILDCHROOT}/var/db/pkg/sys-kernel/* -rm -rf ${CD_BUILDCHROOT}/usr/lib/gcc-lib/*/*/libgcj* -rm -rf ${CD_BUILDCHROOT}/usr/lib/*.a -rm -rf ${CD_BUILDCHROOT}/lib/*.a -rm -rf ${CD_BUILDCHROOT}/usr/X11R6/lib/*.a -#remove entire directory trees (argument 1) *except* for these files/dir trees (arguments 2+) -zapmost /usr/share/terminfo l/linux v/vt100 v/vt102 n/nxterm x/xterm x/xterm-color -zapmost /usr/share/locale C en_US -zapmost /usr/X11R6/lib/X11/locale iso8859-1 iso8859-15 common en_US.UTF-8 -[ -e ${CD_BUILDCHROOT}/usr/lib/locale ] && zapmost /usr/lib/locale en_US -zapmost /usr/share/misc magic pci.ids diff --git a/src/livecd/profiles/lw-ut2003/gaming-config b/src/livecd/profiles/lw-ut2003/gaming-config deleted file mode 100644 index da32fb4475..0000000000 --- a/src/livecd/profiles/lw-ut2003/gaming-config +++ /dev/null @@ -1,1243 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_LOLAT=y -# CONFIG_LOLAT_SYSCTL is not set -# CONFIG_M386 is not set -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -CONFIG_M68631=y -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -CONFIG_X86_WP_WORKS_OK=y -CONFIG_X86_INVLPG=y -CONFIG_X86_CMPXCHG=y -CONFIG_X86_XADD=y -CONFIG_X86_BSWAP=y -CONFIG_X86_POPAD_OK=y -# CONFIG_RWSEM_GENERIC_SPINLOCK is not set -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_X86_L1_CACHE_SHIFT=5 -CONFIG_X86_HAS_TSC=y -CONFIG_X86_GOOD_APIC=y -CONFIG_X86_PGE=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -CONFIG_PREEMPT=y -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set -CONFIG_X86_TSC=y -CONFIG_HAVE_DEC_LOCK=y - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -CONFIG_CARDBUS=y -CONFIG_TCIC=y -CONFIG_I82092=y -CONFIG_I82365=y - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -# CONFIG_CISS_SCSI_TAPE is not set -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -# CONFIG_CDROM_PKTCDVD is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -# CONFIG_BLK_DEV_IDESCSI is not set -CONFIG_IDE_TASK_IOCTL=y -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_CMD680 is not set -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -# CONFIG_PDC202XX_BURST is not set -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -# CONFIG_SCSI is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_BOOT is not set -# CONFIG_FUSION_ISENSE is not set -# CONFIG_FUSION_CTL is not set -# CONFIG_FUSION_LAN is not set - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -# CONFIG_IEEE1394_SBP2 is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -CONFIG_PCMCIA_IBMTR=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_AIRONET4500_CS=m - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -CONFIG_INPUT_EVDEV=y - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -CONFIG_AGP_INTEL=y -CONFIG_AGP_I810=y -CONFIG_AGP_VIA=y -CONFIG_AGP_AMD=y -CONFIG_AGP_AMD_8151=y -CONFIG_AGP_SIS=y -CONFIG_AGP_ALI=y -CONFIG_AGP_SWORKS=y -CONFIG_DRM=y -# CONFIG_DRM_OLD is not set -CONFIG_DRM_NEW=y -CONFIG_DRM_TDFX=m -CONFIG_DRM_R128=m -CONFIG_DRM_RADEON=m -CONFIG_DRM_I810=m -CONFIG_DRM_I810_XFREE_41=y -CONFIG_DRM_I830=m -CONFIG_DRM_MGA=m -CONFIG_DRM_SIS=m - -# -# PCMCIA character devices -# -CONFIG_PCMCIA_SERIAL_CS=m -CONFIG_SYNCLINK_CS=m -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_SUPERMOUNT is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_DMAPI is not set -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_SOUND_ALI5455=m -# CONFIG_SOUND_BT878 is not set -CONFIG_SOUND_CMPCI=m -# CONFIG_SOUND_CMPCI_FM is not set -# CONFIG_SOUND_CMPCI_MIDI is not set -# CONFIG_SOUND_CMPCI_JOYSTICK is not set -# CONFIG_SOUND_CMPCI_CM8738 is not set -CONFIG_SOUND_EMU10K1=m -# CONFIG_MIDI_EMU10K1 is not set -CONFIG_SOUND_FUSION=m -CONFIG_SOUND_CS4281=m -CONFIG_SOUND_ES1370=m -CONFIG_SOUND_ES1371=m -CONFIG_SOUND_ESSSOLO1=m -CONFIG_SOUND_MAESTRO=m -CONFIG_SOUND_MAESTRO3=m -CONFIG_SOUND_FORTE=m -CONFIG_SOUND_ICH=m -CONFIG_SOUND_RME96XX=m -CONFIG_SOUND_SONICVIBES=m -CONFIG_SOUND_TRIDENT=m -CONFIG_SOUND_MSNDCLAS=m -# CONFIG_MSNDCLAS_HAVE_BOOT is not set -CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin" -CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin" -CONFIG_SOUND_MSNDPIN=m -# CONFIG_MSNDPIN_HAVE_BOOT is not set -CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin" -CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin" -CONFIG_SOUND_VIA82CXXX=m -# CONFIG_MIDI_VIA82CXXX is not set -CONFIG_SOUND_OSS=m -# CONFIG_SOUND_TRACEINIT is not set -# CONFIG_SOUND_DMAP is not set -CONFIG_SOUND_AD1816=m -CONFIG_SOUND_SGALAXY=m -CONFIG_SOUND_ADLIB=m -CONFIG_SOUND_ACI_MIXER=m -CONFIG_SOUND_CS4232=m -CONFIG_SOUND_SSCAPE=m -CONFIG_SOUND_GUS=m -# CONFIG_SOUND_GUS16 is not set -# CONFIG_SOUND_GUSMAX is not set -CONFIG_SOUND_VMIDI=m -CONFIG_SOUND_TRIX=m -CONFIG_SOUND_MSS=m -CONFIG_SOUND_MPU401=m -CONFIG_SOUND_NM256=m -CONFIG_SOUND_MAD16=m -# CONFIG_MAD16_OLDCARD is not set -CONFIG_SOUND_PAS=m -# CONFIG_PAS_JOYSTICK is not set -CONFIG_SOUND_PSS=m -# CONFIG_PSS_MIXER is not set -# CONFIG_PSS_HAVE_BOOT is not set -CONFIG_SOUND_SB=m -CONFIG_SOUND_AWE32_SYNTH=m -CONFIG_SOUND_WAVEFRONT=m -CONFIG_SOUND_MAUI=m -CONFIG_SOUND_YM3812=m -CONFIG_SOUND_OPL3SA1=m -CONFIG_SOUND_OPL3SA2=m -CONFIG_SOUND_YMFPCI=m -# CONFIG_SOUND_YMFPCI_LEGACY is not set -CONFIG_SOUND_UART6850=m -CONFIG_SOUND_AEDSP16=m -# CONFIG_SC6600 is not set -# CONFIG_AEDSP16_SBPRO is not set -# CONFIG_AEDSP16_MSS is not set -# CONFIG_AEDSP16_MPU401 is not set -# CONFIG_SOUND_TVMIXER is not set - -# -# USB support -# -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=m -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=m -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -CONFIG_USB_HIDDEV=y -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -# CONFIG_USB_LCD is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/lw-ut2003/gaming-config2 b/src/livecd/profiles/lw-ut2003/gaming-config2 deleted file mode 100644 index 6e54131e6e..0000000000 --- a/src/livecd/profiles/lw-ut2003/gaming-config2 +++ /dev/null @@ -1,1309 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_LOLAT=y -# CONFIG_LOLAT_SYSCTL is not set -# CONFIG_M386 is not set -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -# CONFIG_M68631 is not set -CONFIG_MPENTIUMIII=y -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -CONFIG_X86_WP_WORKS_OK=y -CONFIG_X86_INVLPG=y -CONFIG_X86_CMPXCHG=y -CONFIG_X86_XADD=y -CONFIG_X86_BSWAP=y -CONFIG_X86_POPAD_OK=y -# CONFIG_RWSEM_GENERIC_SPINLOCK is not set -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_X86_L1_CACHE_SHIFT=5 -CONFIG_X86_HAS_TSC=y -CONFIG_X86_GOOD_APIC=y -CONFIG_X86_PGE=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_F00F_WORKS_OK=y -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -CONFIG_SMP=y -CONFIG_PREEMPT=y -# CONFIG_MULTIQUAD is not set -# CONFIG_X86_TSC_DISABLE is not set -CONFIG_X86_TSC=y -CONFIG_HAVE_DEC_LOCK=y - -# -# General setup -# -CONFIG_NET=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -# CONFIG_PCMCIA is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_IBM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -# CONFIG_ACPI_HT_ONLY is not set -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -# CONFIG_CDROM_PKTCDVD is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -# CONFIG_NETFILTER is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_IPV6=y -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_CMD680 is not set -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -# CONFIG_PDC202XX_BURST is not set -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -# CONFIG_SCSI_SYM53C8XX is not set -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -CONFIG_EQUALIZER=y -CONFIG_TUN=m -CONFIG_ETHERTAP=y -CONFIG_NET_SB1000=m - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -CONFIG_FDDI=y -CONFIG_DEFXX=m -CONFIG_SKFP=m -CONFIG_HIPPI=y -CONFIG_ROADRUNNER=m -# CONFIG_ROADRUNNER_LARGE_RINGS is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_STRIP is not set -# CONFIG_WAVELAN is not set -# CONFIG_ARLAN is not set -# CONFIG_AIRONET4500 is not set -# CONFIG_AIRONET4500_NONCS is not set -# CONFIG_AIRONET4500_PROC is not set -# CONFIG_AIRO is not set -# CONFIG_HERMES is not set -# CONFIG_PLX_HERMES is not set -# CONFIG_PCI_HERMES is not set -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_IRDA_DEBUG=y - -# -# Infrared-port device drivers -# -CONFIG_IRTTY_SIR=m -CONFIG_IRPORT_SIR=m -CONFIG_DONGLE=y -CONFIG_ESI_DONGLE=m -CONFIG_ACTISYS_DONGLE=m -CONFIG_TEKRAM_DONGLE=m -CONFIG_GIRBIL_DONGLE=m -CONFIG_LITELINK_DONGLE=m -CONFIG_MCP2120_DONGLE=m -CONFIG_OLD_BELKIN_DONGLE=m -CONFIG_ACT200L_DONGLE=m -CONFIG_MA600_DONGLE=m -CONFIG_USB_IRDA=m -CONFIG_NSC_FIR=m -CONFIG_WINBOND_FIR=m -CONFIG_TOSHIBA_FIR=m -CONFIG_SMC_IRCC_FIR=m -CONFIG_ALI_FIR=m -CONFIG_VLSI_FIR=m - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -CONFIG_ISDN_DRV_LOOP=m -CONFIG_ISDN_DIVERSION=m - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -CONFIG_AGP_INTEL=y -CONFIG_AGP_I810=y -CONFIG_AGP_VIA=y -CONFIG_AGP_AMD=y -# CONFIG_AGP_AMD_8151 is not set -CONFIG_AGP_SIS=y -CONFIG_AGP_ALI=y -# CONFIG_AGP_SWORKS is not set -# CONFIG_DRM is not set -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_SUPERMOUNT is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -CONFIG_XFS_QUOTA=y -CONFIG_XFS_DMAPI=y -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -# CONFIG_ZISOFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -CONFIG_VIDEO_SELECT=y -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -CONFIG_FB=y -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FB_LOGO_TUX is not set -# CONFIG_FB_LOGO_LARRY is not set -# CONFIG_FB_LOGO_GENTOO is not set -# CONFIG_FB_LOGO_G is not set -# CONFIG_FB_LOGO_PENGUIN is not set -CONFIG_FB_LOGO_POWEREDBY=y -# CONFIG_FB_RIVA is not set -# CONFIG_FB_CLGEN is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_VESA=y -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_HGA is not set -CONFIG_VIDEO_SELECT=y -# CONFIG_LPP is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -CONFIG_FB_VMWARE_SVGA=y -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_FBCON_SPLASHSCREEN=y -CONFIG_FBCON_CFB16=y -# CONFIG_FBCON_ADVANCED is not set -CONFIG_FBCON_CFB8=y -CONFIG_FBCON_CFB16=y -CONFIG_FBCON_CFB24=y -CONFIG_FBCON_CFB32=y -# CONFIG_FBCON_FONTWIDTH8_ONLY is not set -# CONFIG_FBCON_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_SOUND_ALI5455=m -CONFIG_SOUND_BT878=m -CONFIG_SOUND_CMPCI=m -# CONFIG_SOUND_CMPCI_FM is not set -# CONFIG_SOUND_CMPCI_MIDI is not set -# CONFIG_SOUND_CMPCI_JOYSTICK is not set -# CONFIG_SOUND_CMPCI_CM8738 is not set -CONFIG_SOUND_EMU10K1=m -# CONFIG_MIDI_EMU10K1 is not set -CONFIG_SOUND_FUSION=m -CONFIG_SOUND_CS4281=m -CONFIG_SOUND_ES1370=m -CONFIG_SOUND_ES1371=m -CONFIG_SOUND_ESSSOLO1=m -CONFIG_SOUND_MAESTRO=m -CONFIG_SOUND_MAESTRO3=m -CONFIG_SOUND_FORTE=m -CONFIG_SOUND_ICH=m -CONFIG_SOUND_RME96XX=m -CONFIG_SOUND_SONICVIBES=m -CONFIG_SOUND_TRIDENT=m -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -CONFIG_SOUND_VIA82CXXX=m -# CONFIG_MIDI_VIA82CXXX is not set -CONFIG_SOUND_OSS=m -# CONFIG_SOUND_TRACEINIT is not set -# CONFIG_SOUND_DMAP is not set -CONFIG_SOUND_AD1816=m -CONFIG_SOUND_SGALAXY=m -CONFIG_SOUND_ADLIB=m -CONFIG_SOUND_ACI_MIXER=m -CONFIG_SOUND_CS4232=m -CONFIG_SOUND_SSCAPE=m -CONFIG_SOUND_GUS=m -# CONFIG_SOUND_GUS16 is not set -# CONFIG_SOUND_GUSMAX is not set -# CONFIG_SOUND_VMIDI is not set -CONFIG_SOUND_TRIX=m -CONFIG_SOUND_MSS=m -# CONFIG_SOUND_MPU401 is not set -CONFIG_SOUND_NM256=m -CONFIG_SOUND_MAD16=m -# CONFIG_MAD16_OLDCARD is not set -CONFIG_SOUND_PAS=m -# CONFIG_PAS_JOYSTICK is not set -CONFIG_SOUND_PSS=m -# CONFIG_PSS_MIXER is not set -# CONFIG_PSS_HAVE_BOOT is not set -CONFIG_SOUND_SB=m -# CONFIG_SOUND_AWE32_SYNTH is not set -# CONFIG_SOUND_WAVEFRONT is not set -# CONFIG_SOUND_MAUI is not set -CONFIG_SOUND_YM3812=m -CONFIG_SOUND_OPL3SA1=m -CONFIG_SOUND_OPL3SA2=m -CONFIG_SOUND_YMFPCI=m -# CONFIG_SOUND_YMFPCI_LEGACY is not set -CONFIG_SOUND_UART6850=m -# CONFIG_SOUND_AEDSP16 is not set -# CONFIG_SOUND_TVMIXER is not set - -# -# USB support -# -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=m -CONFIG_USB_UHCI_ALT=m -CONFIG_USB_OHCI=m -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -CONFIG_USB_BLUETOOTH=m -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_TIGL=m -CONFIG_USB_BRLVGER=m -CONFIG_USB_LCD=m - -# -# Bluetooth support -# -CONFIG_BLUEZ=m -CONFIG_BLUEZ_L2CAP=m -CONFIG_BLUEZ_SCO=m -CONFIG_BLUEZ_BNEP=m -CONFIG_BNEP_MC_FILTER=y -CONFIG_BNEP_PROTO_FILTER=y - -# -# Bluetooth device drivers -# -CONFIG_BLUEZ_HCIUSB=m -# CONFIG_BLUEZ_USB_ZERO_PACKET is not set -CONFIG_BLUEZ_HCIUART=m -CONFIG_BLUEZ_HCIUART_H4=y -# CONFIG_BLUEZ_HCIDTL1 is not set -# CONFIG_BLUEZ_HCIBT3C is not set -# CONFIG_BLUEZ_HCIBLUECARD is not set -CONFIG_BLUEZ_HCIVHCI=m - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/lw-ut2003/gentoo.lss b/src/livecd/profiles/lw-ut2003/gentoo.lss Binary files differdeleted file mode 100644 index 6c7c89c82b..0000000000 --- a/src/livecd/profiles/lw-ut2003/gentoo.lss +++ /dev/null diff --git a/src/livecd/profiles/lw-ut2003/help.msg b/src/livecd/profiles/lw-ut2003/help.msg deleted file mode 100644 index d020308813..0000000000 --- a/src/livecd/profiles/lw-ut2003/help.msg +++ /dev/null @@ -1,26 +0,0 @@ -Gentoo Linux 1.4 LiveCD boot options - [F1 to redisplay boot graphic] - -At the prompt type "gentoo option" -available at prompt "gentoo,acpi,memtest" -or just hit enter if no options are needed. -Type "acpi option" at a prompt to enable acpi on the default gentoo kernel -If you experience a lockup please try to boot the cd after a poweroff. - -agpgart loads agpgart (use if you have graphic problems,lockups) -doscsi scan for scsi devices (breaks some ethernet cards) -nodetect causes hwsetup/kudzu and hotplug not to run -dofirewire modprobes firewire modules in initrd (for firewire cdroms,etc) -nousb disables usb module load from initrd, disables hotplug -nodhcp dhcp does not automatically start if nic detected -doataraid loads ide raid modules from initrd -dopcmcia starts pcmcia service -noapm disables apm module load -noraid disables loading of evms modules -nohotplug disables loading hotplug service -ide=nodma Force disabling of dma for malfunctioning ide devices -cdcache Cache the entire runtime portion of cd in ram, This - uses 40mb of RAM , but allows you to umount /mnt/cdrom - and mount another cdrom. -noraid disables autoloading of evms modules -dokeymap enable keymap selection for non-us keyboard layouts -noapic disable apic (try if having hardware problems ,nics,scsi,etc) diff --git a/src/livecd/profiles/lw-ut2003/isolinux.cfg b/src/livecd/profiles/lw-ut2003/isolinux.cfg deleted file mode 100644 index aa3743ee00..0000000000 --- a/src/livecd/profiles/lw-ut2003/isolinux.cfg +++ /dev/null @@ -1,25 +0,0 @@ -default gentoo - -#timeout 10 -prompt 0 -#display boot.msg -display boot1.msg -F1 boot.msg -F2 help.msg - -label gentoo - kernel gentoo - append splash=silent vga=791 initrd=initrd.1024 acpi=off root=/dev/ram0 init=/linuxrc nomce - -label acpi - kernel gentoo - append splash=silent vga=791 initrd=initrd acpi=on root=/dev/ram0 init=/linuxrc nomce - -label nofb - kernel gentoo - append vga=normal initrd=initrd acpi=off root=/dev/ram0 init=/linuxrc nomce - -label memtest - kernel memtest - - diff --git a/src/livecd/profiles/lw-ut2003/kernel-config b/src/livecd/profiles/lw-ut2003/kernel-config deleted file mode 100644 index 466f2a02c3..0000000000 --- a/src/livecd/profiles/lw-ut2003/kernel-config +++ /dev/null @@ -1,1294 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -# CONFIG_LOLAT is not set -# CONFIG_LOLAT_SYSCTL is not set -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M686 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -# CONFIG_MK7 is not set -# CONFIG_MK8 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_THINKPAD is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_1GB is not set -CONFIG_2GB=y -# CONFIG_3GB is not set -# CONFIG_05GB is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -CONFIG_CARDBUS=y -CONFIG_TCIC=y -CONFIG_I82092=y -CONFIG_I82365=y - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -CONFIG_EVMS_GPT_SEGMENT_MGR=m -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -# CONFIG_EVMS_OS2 is not set -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -# CONFIG_CRYPTO is not set -# CONFIG_CIPHERS is not set -# CONFIG_DIGESTS is not set -# CONFIG_CRYPTODEV is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_IPSEC is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -CONFIG_IDE_TASK_IOCTL=y -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_BLK_DEV_GENERIC is not set -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_TRIFLEX=y -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_BLK_DEV_NFORCE=y -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX_OLD=y -# CONFIG_PDC202XX_BURST is not set -CONFIG_BLK_DEV_PDC202XX_NEW=y -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_SC1200=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIIMAGE=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_PDC202XX=y -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m -CONFIG_BLK_DEV_ATARAID_SII=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_BUILD_FIRMWARE is not set -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -CONFIG_SCSI_SYM53C8XX=m -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -CONFIG_SCSI_PCMCIA=y -CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_FDOMAIN=m -CONFIG_PCMCIA_NINJA_SCSI=m -CONFIG_PCMCIA_QLOGIC=m - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_MAX_SGE=40 -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_TYPHOON=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_AMD8111_ETH=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -# CONFIG_EEPRO100_PIO is not set -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_R8169=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -CONFIG_PCMCIA_IBMTR=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_AIRONET4500_CS=m - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m -CONFIG_USB_AUERISDN=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_ECC is not set -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_IPMI_PANIC_EVENT is not set -# CONFIG_IPMI_DEVICE_INTERFACE is not set -# CONFIG_IPMI_KCS is not set -# CONFIG_IPMI_WATCHDOG is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_SCx200_GPIO is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set - -# -# PCMCIA character devices -# -CONFIG_PCMCIA_SERIAL_CS=m -CONFIG_SYNCLINK_CS=m -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_PROC_CONFIG=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -# CONFIG_IMON is not set - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=y -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=y -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -# CONFIG_USB_LCD is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Windows Applications support -# -# CONFIG_MKI is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/lw-ut2003/keymaps/bin-keymaps.tar.gz b/src/livecd/profiles/lw-ut2003/keymaps/bin-keymaps.tar.gz Binary files differdeleted file mode 100644 index 8895ca4689..0000000000 --- a/src/livecd/profiles/lw-ut2003/keymaps/bin-keymaps.tar.gz +++ /dev/null diff --git a/src/livecd/profiles/lw-ut2003/keymaps/key.lst b/src/livecd/profiles/lw-ut2003/keymaps/key.lst deleted file mode 100644 index 7396871474..0000000000 --- a/src/livecd/profiles/lw-ut2003/keymaps/key.lst +++ /dev/null @@ -1,10 +0,0 @@ -Please select a keymap from the following list by typing in the appropriate -name or number. Hit Enter for the default "us/41" US English keymap. - - 1 azerty 7 cf 13 es 19 il 25 mk 31 ru 37 trf - 2 be 8 croat 14 et 20 is 26 nl 32 se 38 trq - 3 bg 9 cz 15 fi 21 it 27 no 33 sg 39 ua - 4 br-a 10 de 16 fr 22 jp 28 pl 34 sk-y 40 uk - 5 br-l 11 dk 17 gr 23 la 29 pt 35 sk-z 41 us - 6 by 12 dvorak 18 hu 24 lt 30 ro 36 slovene 42 wangbe - diff --git a/src/livecd/profiles/lw-ut2003/launcher/gamelaunch.pro b/src/livecd/profiles/lw-ut2003/launcher/gamelaunch.pro deleted file mode 100644 index 81650932c1..0000000000 --- a/src/livecd/profiles/lw-ut2003/launcher/gamelaunch.pro +++ /dev/null @@ -1,10 +0,0 @@ -SOURCES += main.cpp -unix { - UI_DIR = .ui - MOC_DIR = .moc - OBJECTS_DIR = .obj -} -FORMS = gamelaunch.ui -TEMPLATE =app -CONFIG += qt warn_on release -LANGUAGE = C++ diff --git a/src/livecd/profiles/lw-ut2003/launcher/gamelaunch.ui b/src/livecd/profiles/lw-ut2003/launcher/gamelaunch.ui deleted file mode 100644 index df1d902621..0000000000 --- a/src/livecd/profiles/lw-ut2003/launcher/gamelaunch.ui +++ /dev/null @@ -1,150 +0,0 @@ -<!DOCTYPE UI><UI version="3.1" stdsetdef="1"> -<class>dialog</class> -<widget class="QDialog"> - <property name="name"> - <cstring>dialog</cstring> - </property> - <property name="geometry"> - <rect> - <x>0</x> - <y>0</y> - <width>572</width> - <height>550</height> - </rect> - </property> - <property name="caption"> - <string>Gentoo GameCD Launcher</string> - </property> - <widget class="QPushButton"> - <property name="name"> - <cstring>launchb</cstring> - </property> - <property name="geometry"> - <rect> - <x>20</x> - <y>490</y> - <width>230</width> - <height>31</height> - </rect> - </property> - <property name="font"> - <font> - </font> - </property> - <property name="text"> - <string>&Launch Unreal 2003</string> - </property> - </widget> - <widget class="QPushButton"> - <property name="name"> - <cstring>restartb</cstring> - </property> - <property name="geometry"> - <rect> - <x>430</x> - <y>490</y> - <width>120</width> - <height>31</height> - </rect> - </property> - <property name="text"> - <string>&Restart</string> - </property> - </widget> - <widget class="QPushButton"> - <property name="name"> - <cstring>webb</cstring> - </property> - <property name="geometry"> - <rect> - <x>270</x> - <y>490</y> - <width>140</width> - <height>31</height> - </rect> - </property> - <property name="text"> - <string>&Web Browser</string> - </property> - </widget> - <widget class="QLabel"> - <property name="name"> - <cstring>pixmapLabel1</cstring> - </property> - <property name="geometry"> - <rect> - <x>90</x> - <y>110</y> - <width>400</width> - <height>368</height> - </rect> - </property> - <property name="frameShape"> - <enum>NoFrame</enum> - </property> - <property name="frameShadow"> - <enum>Plain</enum> - </property> - <property name="pixmap"> - <pixmap>image0</pixmap> - </property> - <property name="scaledContents"> - <bool>true</bool> - </property> - </widget> - <widget class="QLabel"> - <property name="name"> - <cstring>textLabel1</cstring> - </property> - <property name="geometry"> - <rect> - <x>40</x> - <y>10</y> - <width>500</width> - <height>80</height> - </rect> - </property> - <property name="text"> - <string>Welcome to the <b>Unreal Tournament 2003 </b>Demo GameCD! From this dialog, you can launch the game -and restart or shutdown your system. We hope you enjoy the <b>Unreal Tournament</b> Demo GameCD</string> - </property> - <property name="alignment"> - <set>WordBreak|AlignBottom</set> - </property> - </widget> -</widget> -<images> - <image name="image0"> - <data format="XPM.GZ" length="300147">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</data> - </image> -</images> -<connections> - <connection> - <sender>launchb</sender> - <signal>clicked()</signal> - <receiver>dialog</receiver> - <slot>launchGame()</slot> - </connection> - <connection> - <sender>restartb</sender> - <signal>clicked()</signal> - <receiver>dialog</receiver> - <slot>restartCD()</slot> - </connection> - <connection> - <sender>webb</sender> - <signal>clicked()</signal> - <receiver>dialog</receiver> - <slot>launchBrowser()</slot> - </connection> -</connections> -<includes> - <include location="local" impldecl="in implementation">gamelaunch.ui.h</include> -</includes> -<slots> - <slot>launchGame()</slot> - <slot>restartCD()</slot> - <slot>launchBrowser()</slot> -</slots> -<layoutdefaults spacing="6" margin="11"/> -</UI> diff --git a/src/livecd/profiles/lw-ut2003/launcher/gamelaunch.ui.h b/src/livecd/profiles/lw-ut2003/launcher/gamelaunch.ui.h deleted file mode 100644 index 042dd25a98..0000000000 --- a/src/livecd/profiles/lw-ut2003/launcher/gamelaunch.ui.h +++ /dev/null @@ -1,35 +0,0 @@ -/**************************************************************************** -** ui.h extension file, included from the uic-generated form implementation. -** -** If you wish to add, delete or rename functions or slots use -** Qt Designer which will update this file, preserving your code. Create an -** init() function in place of a constructor, and a destroy() function in -** place of a destructor. -*****************************************************************************/ - -#include <unistd.h> - -void dialog::launchGame() -{ - - hide(); - system("/usr/bin/ut2003-demo"); - show(); -} - - - -void dialog::restartCD() -{ - hide(); - system("/sbin/reboot -ndfi"); - exit(0); -} - - -void dialog::launchBrowser() -{ - hide(); - system("/usr/bin/mozilla http://www.gentoo.org"); - show(); -} diff --git a/src/livecd/profiles/lw-ut2003/launcher/main.cpp b/src/livecd/profiles/lw-ut2003/launcher/main.cpp deleted file mode 100644 index 3e7b143061..0000000000 --- a/src/livecd/profiles/lw-ut2003/launcher/main.cpp +++ /dev/null @@ -1,11 +0,0 @@ -#include <qapplication.h> -#include "gamelaunch.h" - -int main( int argc, char ** argv ) -{ - QApplication a( argc, argv ); - dialog w; - w.show(); - a.connect( &a, SIGNAL( lastWindowClosed() ), &a, SLOT( quit() ) ); - return a.exec(); -} diff --git a/src/livecd/profiles/lw-ut2003/linuxrc b/src/livecd/profiles/lw-ut2003/linuxrc deleted file mode 100644 index 77449bfb26..0000000000 --- a/src/livecd/profiles/lw-ut2003/linuxrc +++ /dev/null @@ -1,278 +0,0 @@ -#!/bin/sh -# -# Script to boot up a system with autodetection of CD location -# -# Daniel Robbins <drobbins@gentoo.org> -# Copyright 2002 Gentoo Technologies, Inc. -# Distributed under the GPL - -PATH=/usr/sbin:/usr/bin:/sbin:/bin -BACK_UP="\033[1K\033[0G" -HILITE="\033[1m" -NORMAL="\033[0m" -WARN="\033[1m" -BAD="\033[1m" -mount -oremount,rw / -mount /proc -# Disable kernel messages to console: -echo "0" > /proc/sys/kernel/printk -SCSI="no" -CDCACHE="no" -IDEBUG="no" -FIREWIRE="no" -ATARAID="no" -PCMCIA="no" -DETECT="no" -USB="yes" -KEYMAP="no" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "doscsi" ] - then - SCSI="yes" - elif [ "$x" = "cdcache" ] - then - CDCACHE="yes" - elif [ "$x" = "idebug" ] - then - IDEBUG="yes" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "dofirewire" ] - then - FIREWIRE="yes" - fi -done -for x in $CMDLINE -do - if [ "$x" = "nousb" ] - then - USB="no" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "doataraid" ] - then - ATARAID="yes" - fi -done -for x in $CMDLINE -do - if [ "$x" = "dopcmcia" ] - then - PCMCIA="yes" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "dokeymap" ] - then - KEYMAP="yes" - fi -done - -blurb() { - echo -ne ${HILITE}${1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} - -# Create the new root FS -mkdir newroot -mount -t tmpfs tmpfs /newroot -cd /newroot -mkdir dev mnt mnt/cdrom mnt/cloop mnt/.init.d mnt/gentoo - -if [ ! -e /newroot/dev/.devfsd ] -then - #mount devfs - mount -t devfs devfs /newroot/dev -fi - -mounted="" - -initmsg() { - echo -e "${HILITE}${*}${NORMAL}" -} - -nocd() { - echo -e "${HILITE}---- CD not found${NORMAL}" - umount /newroot - ash - umount /proc - exec /linuxrc -} - -getkeymap() { - local mykeymap - echo -ne ${HILITE} - cat /keymaps/key.lst - echo -ne ${NORMAL} - read -p "Keymap selection: " mykeymap - if [ -e /keymaps/${mykeymap}.map ] - then - echo -e "${HILITE}---- Loading ${mykeymap} keymap${NORMAL}" - loadkmap < /keymaps/${mykeymap}.map - elif [ "$mykeymap" = "" ] - then - #default keymap is "us" - echo -e "${HILITE}---- Loading default (US) keymap${NORMAL}" - loadkmap < /keymaps/us.map - else - getkeymap - fi -} - -modules_scan() { - local type - type=${1}; shift - for x in "$@" - do - if [ ! -e /modules/${type}/${x}.o ] - then - echo -e "${HILITE}---- Module ${x}.o not found; skipping...${NORMAL}" - continue - fi - blurb "---- Scanning for ${x}..." - insmod -f /modules/${type}/${x}.o > /dev/null 2>&1 - if [ $? -eq 0 ] - then - backup - echo -e "${GOOD}---- Detected ${x} hardware${NORMAL}" - else - backup - echo -ne "${NORMAL}" - fi - done -} - -findmount() { - if [ "$*" = "" ] - then - nocd - fi - while ! mount -t iso9660 -r $1 /newroot/mnt/cdrom; do - shift - if [ "$1" = "" ]; then - nocd - fi - done - if [ ! -e /newroot/mnt/cdrom/livecd.cloop -a ! -e /newroot/mnt/cdrom/livecd.loop ]; then - echo -e "${HILITE}---- $1 is not a LiveCD; skipping...${NORMAL}" - umount /newroot/mnt/cdrom - shift - findmount $* - fi - mounted=$1 - #echo -e "${HILITE}---- CD medium found on $1${NORMAL}" -} - -# Mount the CD -if [ "$SCSI" = "yes" ] -then -DEVICE=SCSI - echo -e "${HILITE}---- Beginning storage detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan storage ##STORAGE_MODULES## -fi - -if [ "$FIREWIRE" = "yes" ] -then -DEVICE=FIREWIRE - echo -e "${HILITE}---- Beginning firewire detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan firewire ##FIREWIRE_MODULES## -fi -if [ "$ATARAID" = "yes" ] -then -DEVICE=ATARAID - echo -e "${HILITE}---- Beginning ata detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan ataraid ##ATARAID_MODULES## -fi - -if [ "$PCMCIA" = "yes" ] -then -DEVICE=PCMCIA - echo -e "${HILITE}---- Beginning pcmcia detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan pcmcia ##PCMCIA_MODULES## -fi -if [ "$USB" = "yes" ] -then -DEVICE=USB - echo -e "${HILITE}---- Beginning usb detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan usb ##USB_MODULES## -fi - -if [ "$KEYMAP" = "yes" ] -then -getkeymap -fi - -#initmsg "---- Mounting the CD" -findmount /newroot/dev/cdroms/* -if [ "$IDEBUG" = "yes" ] -then - exec /bin/sh -fi -if [ -e /newroot/mnt/cdrom/livecd.cloop ] -then - #compressed loopback - mknod /dev/cloop b 240 0 - if [ "$CDCACHE" = "yes" ] - then - #initmsg "---- Attempting to cache CD image to tmpfs" - cp /newroot/mnt/cdrom/livecd.cloop /newroot/mnt/ - if [ $? -ne 0 ] - then - #initmsg "---- Caching failed (likely due to lack of space" - CDCACHE="no" - rm -f /newroot/mnt/livecd.cloop - else - insmod /modules/cloop.o file=/newroot/mnt/livecd.cloop >/dev/null 2>&1 - mount -o ro -t ext2 /dev/cloop /newroot/mnt/cloop - fi - fi - if [ "$CDCACHE" = "no" ] - then - #initmsg "---- Mounting compressed loopback filesystem" - insmod /modules/cloop.o file=/newroot/mnt/cdrom/livecd.cloop >/dev/null 2>&1 - mount -o ro -t ext2 /dev/cloop /newroot/mnt/cloop - fi -else - mknod /dev/loop0 b 7 0 - #initmsg "---- Mounting loopback filesystem" - losetup /dev/loop0 /newroot/mnt/cdrom/livecd.loop - mount -o ro -t ext2 /dev/loop0 /newroot/mnt/cloop -fi -# Now the CD is mounted on /newroot/cdrom -#initmsg "---- Copying and symlinking files from CD to populate /" - -cd /newroot/ -for x in bin sbin lib boot usr opt install.txt -do - ln -s mnt/cloop/${x} ${x} -done -mkdir initrd proc tmp -chmod 1777 tmp -(cd /newroot/mnt/cloop; cp -a etc root home var /newroot) -#store name of mounted CD so we can add it to mtab.... (/etc/init.d/local will take it -#from here... -echo $mounted > tmp/mycd - -#initmsg "---- Switching to tmpfs root filesystem" -echo "6" > /proc/sys/kernel/printk -umount /proc -pivot_root . initrd -exec chroot . /sbin/init </dev/console >/dev/console 2>&1 diff --git a/src/livecd/profiles/lw-ut2003/md b/src/livecd/profiles/lw-ut2003/md deleted file mode 100644 index 179b53ea9c..0000000000 --- a/src/livecd/profiles/lw-ut2003/md +++ /dev/null @@ -1,73 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw-ut2003/Attic/md,v 1.1 2003/10/19 03:46:49 livewire Exp $ - -HILITE="\033[1m" -NORMAL="\033[0m" - -RAID="yes" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "noraid" ] - then - RAID="no" - fi -done - -depend() { - after checkfs - after * -} - -blurb() { - echo -ne ${HILITE}${1} - #blurblen=${#1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} -start() { - ebegin "Raid Setup" - -if [ "$RAID" = "yes" ] - then - ebegin "Auto-detecting EVMS modules" - # Disable kernel messages to console: - echo "0" > /proc/sys/kernel/printk - local x - for x in /lib/modules/*/kernel/drivers/evms/* - do - y=${x##*/} - y=${y%%.*} - echo -ne " ${GOOD}*${NORMAL} Scanning for ${y}..." - insmod -f ${x} > /dev/null 2>&1 - backup - done - fi - -if [ "$RAID" = "yes" ] - then - ebegin "Auto-detecting MD modules" - # Disable kernel messages to console: - echo "0" > /proc/sys/kernel/printk - local x - for x in /lib/modules/*/kernel/drivers/md/* - do - y=${x##*/} - y=${y%%.*} - echo -ne " ${GOOD}*${NORMAL} Scanning for ${y}..." - insmod -f ${x} > /dev/null 2>&1 - backup - done - fi - -} - -stop() { - return -} - -# vim:ts=4 diff --git a/src/livecd/profiles/lw-ut2003/motd b/src/livecd/profiles/lw-ut2003/motd deleted file mode 100644 index cce52da831..0000000000 --- a/src/livecd/profiles/lw-ut2003/motd +++ /dev/null @@ -1,4 +0,0 @@ -Welcome to the Gentoo Linux LiveCD! -Build: 19 Mar 2003, i686 optimizations - -type "x-setup" to (re)start ut2003. diff --git a/src/livecd/profiles/lw-ut2003/net-setup b/src/livecd/profiles/lw-ut2003/net-setup deleted file mode 100644 index b74ed027be..0000000000 --- a/src/livecd/profiles/lw-ut2003/net-setup +++ /dev/null @@ -1,32 +0,0 @@ -#!/bin/bash -[ "$1" = "" ] && echo "net-setup: please specify a network interface" && exit 1 -[ ! -d /tmp/setup.opts ] && mkdir /tmp/setup.opts -cd /tmp/setup.opts -dialog --title "Network Setup" --menu "Time to set up the $1 interface! You can use DHCP to automatically configure a network interface or you can specify an IP and related settings manually. Choose one option:" 20 60 7 0 "Use DHCP to auto-detect my network settings" 1 "Specify an IP address manually" 2> ${1}.1 -mynetsel=`cat ${1}.1` -case $mynetsel in -0) - /sbin/dhcpcd -t 10 ${1} - ;; -1) - dialog --title "IP address" --inputbox "Please enter an IP address for $1:" 20 50 "192.168.1.1" 2> ${1}.IP - dialog --title "Broadcast address" --inputbox "Please enter a Broadcast address for $1:" 20 50 "192.168.1.255" 2> ${1}.B - dialog --title "Network mask" --inputbox "Please enter a Network Mask for $1:" 20 50 "255.255.255.0" 2> ${1}.NM - dialog --title "Gateway" --inputbox "Please enter a Gateway for $1 (hit enter for none:)" 20 50 2> ${1}.GW - dialog --title "DNS server" --inputbox "Please enter a name server to use (hit enter for none:)" 20 50 2> ${1}.NS - /sbin/ifconfig $1 `cat ${1}.IP` broadcast `cat ${1}.B` netmask `cat ${1}.NM` - myroute=`cat ${1}.GW` - if [ "$myroute" != "" ] - then - /sbin/route add default gw $myroute dev $1 netmask 0.0.0.0 metric 1 - fi - myns="`cat ${1}.NS`" - if [ "$myns" = "" ] - then - : > /etc/resolv.conf - else - echo "nameserver $myns" > /etc/resolv.conf - fi - ;; -esac -echo "Type \"ifconfig\" to make sure the interface was configured correctly." diff --git a/src/livecd/profiles/lw-ut2003/opengl-update b/src/livecd/profiles/lw-ut2003/opengl-update deleted file mode 100644 index 10d4796170..0000000000 --- a/src/livecd/profiles/lw-ut2003/opengl-update +++ /dev/null @@ -1,95 +0,0 @@ -#!/bin/bash -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# Author: Martin Schlemmer <azarah@gentoo.org> -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw-ut2003/Attic/opengl-update,v 1.1 2003/10/19 03:46:49 livewire Exp $ - - -source /etc/init.d/functions.sh - -if [ `id -u` -ne 0 ] -then - eerror "${0}: must be root." - exit 1 -fi - -usage() { -cat << FOO -usage: opengl-update <GL implementation> - -note: - This utility switch between OpenGL implementations. Currently there - are two supported implementations, namely "xfree" and "nvidia", the - implementations for XFree86 and the NVidia drivers respectively. - -examples: - opengl-update xfree - This will setup things to use libGL.so from XFree86 - - opengl-update nvidia - This will setup things to use libGL.so from the NVidia drivers. - -FOO - exit 1 -} - -if [ "$#" -ne 1 ] -then - usage -fi -if [ ! -d /usr/lib/opengl/${1} ] -then - usage -else - ebegin "Switching to ${1} OpenGL interface" - - #set up the $LDPATH - echo "LDPATH=/usr/lib/opengl/${1}/lib" >/etc/env.d/09opengl - /usr/sbin/env-update &>/dev/null - - #setup the /usr/lib/libGL.so symlink - rm -f /etc/opengl/libGL.so /etc/opengl/libGL.so.1 - - realname="$(readlink /usr/lib/opengl/${1}/lib/libGL.so)" - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libGL.so - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libGL.so.1 - - #setup the /usr/X11R6/lib/libMesaGL.so symlink - rm -f /etc/opengl/libMesaGL.so - realname="$(readlink /usr/lib/opengl/${1}/lib/libGL.so)" - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libMesaGL.so - - rm -f /etc/opengl/libGLcore.so* - - if [ -e /usr/lib/opengl/${1}/lib/libGLcore.so ] - then - realname="$(readlink /usr/lib/opengl/${1}/lib/libGLcore.so)" - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libGLcore.so - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libGLcore.so.1 - fi - - #setup the /usr/X11R6/lib/modules/extensions/libglx.so symlink - rm -f /etc/opengl/libglx.* - - if [ -e /usr/lib/opengl/${1}/extensions/libglx.so ] - then - ln -sf /usr/lib/opengl/${1}/extensions/libglx.so \ - /etc/opengl/libglx.so - fi - #setup the /usr/X11R6/lib/modules/extensions/libglx.a symlink - if [ -e /usr/lib/opengl/${1}/extensions/libglx.a ] - then - ln -sf /usr/lib/opengl/${1}/extensions/libglx.a \ - /etc/opengl/libglx.a - fi - - eend 0 -fi - - -# vim:ts=4 diff --git a/src/livecd/profiles/lw-ut2003/openglify b/src/livecd/profiles/lw-ut2003/openglify deleted file mode 100644 index 5b31383f42..0000000000 --- a/src/livecd/profiles/lw-ut2003/openglify +++ /dev/null @@ -1,29 +0,0 @@ -#!/bin/bash -#This script is designed to tweak the system for CD-based opengl-update -#set up our flexible opengl stuff: - -#if [ ! -e ${CD_BUILDCHROOT}/etc/opengl ] -#then - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/opengl-update ${CD_BUILDCHROOT}/usr/sbin - #move symlinks to a malleable /etc/opengl directory. - install -d ${CD_BUILDCHROOT}/etc/opengl - mv ${CD_BUILDCHROOT}/usr/lib/libGL.* ${CDROOT}/etc/opengl/ - mv ${CD_BUILDCHROOT}/usr/lib/libGLcore.* ${CDROOT}/etc/opengl/ - ln -sf /etc/opengl/libGL.so ${CD_BUILDCHROOT}/usr/lib/libGL.so - ln -sf /etc/opengl/libGL.so.1 ${CD_BUILDCHROOT}/usr/lib/libGL.so.1 - ln -sf /etc/opengl/libGLcore.so ${CD_BUILDCHROOT}/usr/lib/libGLcore.so - ln -sf /etc/opengl/libGLcore.so.1 ${CD_BUILDCHROOT}/usr/lib/libGLcore.so.1 - mv ${CD_BUILDCHROOT}/usr/X11R6/lib/libMesaGL.so ${CDROOT}/etc/opengl/ - ln -sf /etc/opengl/libMesaGL.so ${CD_BUILDCHROOT}/usr/X11R6/lib/libMesaGL.so - for x in libglx.a libglx.so - do - if [ -e ${CD_BUILDCHROOT}/usr/X11R6/lib/modules/extensions/${x} -o -L \ - ${CD_BUILDCHROOT}/usr/X11R6/lib/modules/extensions/${x} ] - then - mv ${CD_BUILDCHROOT}/usr/X11R6/lib/modules/extensions/${x} ${CDROOT}/etc/opengl/ - fi - ln -s /etc/opengl/${x} \ - ${CD_BUILDCHROOT}/usr/X11R6/lib/modules/extensions/${x} - done -#fi - diff --git a/src/livecd/profiles/lw-ut2003/post-clean b/src/livecd/profiles/lw-ut2003/post-clean deleted file mode 100644 index b68392763d..0000000000 --- a/src/livecd/profiles/lw-ut2003/post-clean +++ /dev/null @@ -1,8 +0,0 @@ -#!/bin/bash -install -m0755 ${LIVECD_ROOT}/profiles/${CD_PROFILE}/x-setup ${CD_BUILDCHROOT}/usr/sbin/x-setup -install -m0755 ${LIVECD_ROOT}/profiles/${CD_PROFILE}/xinitrc ${CD_BUILDCHROOT}/root/.xinitrc -install -m0644 ${LIVECD_ROOT}/profiles/${CD_PROFILE}/XF86Config.* ${CD_BUILDCHROOT}/etc/X11/ -#tar -zxvf ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/${GAME_TAR} -C ${CD_BUILDCHROOT}/opt || die -tar -jxvf ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/root.tar.bz2 -C ${CD_BUILDCHROOT}/ || die -tar -jxvf ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fluxbox.tar.bz2 -C ${CD_BUILDCHROOT}/root || die - diff --git a/src/livecd/profiles/lw-ut2003/pre-clean b/src/livecd/profiles/lw-ut2003/pre-clean deleted file mode 100644 index 6bc951de43..0000000000 --- a/src/livecd/profiles/lw-ut2003/pre-clean +++ /dev/null @@ -1,91 +0,0 @@ -#!/bin/bash -echo "$CD_HOSTNAME" > ${CD_BUILDCHROOT}/etc/hostname || die -#modprobe has a bug and auto-adds a "above hid keybdev mousedev" line to it's internel configuration. -#this fixes it.... -echo "above hid" > ${CD_BUILDCHROOT}/etc/modules.d/hidfix -cp ${CD_BUILDCHROOT}/etc/init.d/net.eth0 ${CD_BUILDCHROOT}/etc/init.d/net.eth1 -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/bash_profile ${CD_BUILDCHROOT}/root/.bash_profile || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/modules ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/checkroot ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/md ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/hotplug ${CD_BUILDCHROOT}/etc/init.d || die -#cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/aumix ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/checkfs ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/mingetty ${CD_BUILDCHROOT}/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/autoconfig ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/usleep ${CD_BUILDCHROOT}/sbin || die -#cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/depscan.sh ${CD_BUILDCHROOT}/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/login.defs ${CD_BUILDCHROOT}/etc || die -cat ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/splash.sh >> ${CD_BUILDCHROOT}/sbin/functions.sh || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/local ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fstab ${CD_BUILDCHROOT}/etc || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/net-setup ${CD_BUILDCHROOT}/usr/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/profile ${CD_BUILDCHROOT}/etc || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/net ${CD_BUILDCHROOT}/etc/conf.d || die -mv ${CD_BUILDCHROOT}/sbin/splash ${CD_BUILDCHROOT}/sbin/splash.bin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/splash ${CD_BUILDCHROOT}/sbin/ || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/rc ${CD_BUILDCHROOT}/sbin/ || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fbtruetype.static ${CD_BUILDCHROOT}/sbin/ || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fbtruetype.static ${CD_BUILDCHROOT}/sbin/fbtruetype || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fbresolution ${CD_BUILDCHROOT}/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/splash.bin ${CD_BUILDCHROOT}/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/bg.png ${CD_BUILDCHROOT}/usr/share/commonbox/backgrounds || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/menu.blackbox ${CD_BUILDCHROOT}/usr/share/commonbox/menu || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/bootsplash-1024x768.cfg ${CD_BUILDCHROOT}/etc/bootsplash/gentoo/config || die -rm -f ${CD_BUILDCHROOT}/usr/share/hwdata/pci.ids -rm -f ${CD_BUILDCHROOT}/usr/share/hwdata/usb.ids -ln -s /usr/share/misc/pci.ids ${CD_BUILDCHROOT}/usr/share/hwdata/pci.ids -ln -s /usr/share/misc/usb.ids ${CD_BUILDCHROOT}/usr/share/hwdata/usb.ids -install -d ${CD_BUILDCHROOT}/usr/share/fonts || die -#ln -s /usr/X11R6/lib/X11/fonts/{TTF,100dpi,75dpi,PEX,Speedo,Type1,truetype,encodings} ${CD_BUILDCHROOT}/usr/share/fonts || die -rm -f ${CD_BUILDCHROOT}/lib/evms/libe2fsim.1.2.1.so -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/install.txt ${CD_BUILDCHROOT}/ || die -echo usbcore >> ${CD_BUILDCHROOT}/etc/hotplug/blacklist -chmod +x ${CD_BUILDCHROOT}/usr/sbin/net-setup || die -mymotd=${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/motd -[ -e $mymotd ] && cp $mymotd ${CD_BUILDCHROOT}/etc -echo "CDBOOT=1" >> ${CD_BUILDCHROOT}/etc/rc.conf || die -echo "svcdir=/var/state/init.d" >> ${CD_BUILDCHROOT}/etc/conf.d/rc || die -echo "127.0.0.1 cdimage localhost" > ${CD_BUILDCHROOT}/etc/hosts || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/inittab ${CD_BUILDCHROOT}/etc || die -mount_all -cat > $CD_BUILDTEMP/chroot-clean << EOF -#!/bin/bash -source /etc/profile -#do our hid fix... -modules-update -cd /usr/src/linux -#produce correct module dependency information -make _modinst_post -rc-update del iptables default -rc-update del netmount default -rc-update add autoconfig default -#rc-update add md default -#remove standard keymap support: -rc-update del keymaps -rc-update del consolefont -rc-update add metalog default -#rc-update add aumix default -fc-cache --force -update-modules -modules-update -#OK, we can't run env-update on the CD itself (likely no python) -#so we will tweak opengl stuff here... -rm /etc/env.d/09opengl -env-update -cp /etc/ld.so.conf /etc/ld.so.conf.orig -rm /usr/sbin/env-update -EOF -chmod +x $CD_BUILDTEMP/chroot-clean -chroot $CD_BUILDCHROOT /tmp/livecd/chroot-clean -[ $? -ne 0 ] && chroot_die "chroot-clean failure" -umount_all -rm -rf ${CD_BUILDCHROOT}/etc/localtime -cp ${CD_BUILDCHROOT}/usr/share/zoneinfo/GMT ${CD_BUILDCHROOT}/etc/localtime || die - -if [ -e "${LIVECD_ROOT}/profiles/${CD_PROFILE}/openglify" ] -then - source ${LIVECD_ROOT}/profiles/${CD_PROFILE}/openglify -fi -find ${CD_BUILDCHROOT}/lib/modules -name modules.dep |xargs touch - diff --git a/src/livecd/profiles/lw-ut2003/settings b/src/livecd/profiles/lw-ut2003/settings deleted file mode 100644 index 4646a859ff..0000000000 --- a/src/livecd/profiles/lw-ut2003/settings +++ /dev/null @@ -1,42 +0,0 @@ -source ${LIVECD_ROOT}/profiles/global/settings -LOOP_MODE=cloop -CD_BUILDROOT=${CD_TEMPROOT}/${CD_PROFILE} -CD_PORTAGE_PROFILE="default-x86-1.4" -CD_USE="-gnome acpi4linux crypt ipv6 -doc -slang X gtk -arts -svga -directfb -ggi -esd -nas \ --perl -python truetype" -#CD_CFLAGS="-O3 -mcpu=i686 -freorder-blocks -fprefetch-loop-arrays -pipe" -CD_CFLAGS="-march=pentium3 -mno-sse -O3 -pipe -finline-functions -fdelete-null-pointer-checks \ --fprefetch-loop-arrays -foptimize-sibling-calls -funroll-loops -frerun-loop-opt \ --frename-registers -fmove-all-movables -freorder-blocks" -CD_CXXFLAGS="${CD_CFLAGS}" -#CD_STAGETARBALL=ftp://ftp.twobit.net/pub/stage3-pentium3-1.4_pre20030308.tar.bz2 -CD_STAGETARBALL=http://distro.ibiblio.org/pub/Linux/distributions/gentoo/experimental/x86/stages/stage3-x86-1.4_pre20030214.tar.bz2 -#modules to auto-detect/copy to the initrd (put in the "/modules/storage" directory) -#aic7xxx_old removed from position after aic7xxx in attempt to fix bugs #12185 and #11278 -STORAGE_MODULES="aic7xxx aic7xxx_old BusLogic \ -ncr53c8xx NCR53c406a \ -initio advansys aha1740 aha1542 aha152x \ -atp870u dtc eata fdomain gdth \ -megaraid pas16 pci2220i pci2000 psi240i \ -qlogicfas qlogicfc qlogicisp \ -seagate t128 tmscsim u14-34f ultrastor wd7000 \ -a100u2w 3w-xxxx DAC960 NCR53c406a \ -aacraid sym53c8xx a100u2w cpqfc \ -dmx3191d dpt_i2o imm in2000 ips qla1280 \ -sim710 sym53c416" -FIREWIRE_MODULES="ieee1394 ohci1394 eth1394 sbp2" -ATARAID_MODULES="ataraid pdcraid hptraid" -PCMCIA_MODULES="ide-cs" -USB_MODULES="usbcore ehci-hcd uhci usb-ohci hid usb-storage" -LOOP_SIZE="1400000" -KERNCONFIG=gaming-config2 -CD_HOSTNAME="cdimage" -CD_PORTDIR="/usr/portage" -CD_ISONAME="gentoo.iso" -ARCH=x86 -###requires 1280.initrd , 1024.initrd, 800.initrd bootsplash initrds in aux-files -BOOTSPLASH=yes -GAME_TAR=armyops170-lnxbeta5.tar.gz -DISTCC_HOSTS="192.168.0.1 192.168.0.2" -MAKEOPTS="-j6" - diff --git a/src/livecd/profiles/lw-ut2003/stage1-experimental b/src/livecd/profiles/lw-ut2003/stage1-experimental deleted file mode 100644 index d9ea429352..0000000000 --- a/src/livecd/profiles/lw-ut2003/stage1-experimental +++ /dev/null @@ -1,17 +0,0 @@ -=sys-kernel/gaming-sources-2.4.20-r3 -xfree -#aumix depends on xfree, so it needs to be here -app-games/ut2003-demo -aumix -iputils -kudzu -hwdata-knoppix -hwsetup -bootsplash -=sys-apps/baselayout-1.8.6.8-r1 -x11-libs/qt -mozilla -xloadimage -giflib -fluxbox -=x11-misc/urw-fonts-2.0-r1 diff --git a/src/livecd/profiles/lw-ut2003/stage1-packages b/src/livecd/profiles/lw-ut2003/stage1-packages deleted file mode 100644 index d4432839cc..0000000000 --- a/src/livecd/profiles/lw-ut2003/stage1-packages +++ /dev/null @@ -1,18 +0,0 @@ -metalog -sys-apps/pciutils -#net-www/lynx -sys-apps/e2fsprogs -sys-apps/reiserfs-utils -sys-apps/hdparm -app-editors/nano -sys-apps/less -net-misc/openssh -net-misc/dhcpcd -mingetty -pwgen -hotplug -dietlibc -popt -dialog -=sys-apps/modutils-2.4.25 -x11-libs/qt diff --git a/src/livecd/profiles/lw-ut2003/stage2-experimental b/src/livecd/profiles/lw-ut2003/stage2-experimental deleted file mode 100644 index aab91526b3..0000000000 --- a/src/livecd/profiles/lw-ut2003/stage2-experimental +++ /dev/null @@ -1,3 +0,0 @@ -nvidia-kernel -nvidia-glx -ati-drivers diff --git a/src/livecd/profiles/lw-ut2003/stage2-packages b/src/livecd/profiles/lw-ut2003/stage2-packages deleted file mode 100644 index b634c4cb16..0000000000 --- a/src/livecd/profiles/lw-ut2003/stage2-packages +++ /dev/null @@ -1,6 +0,0 @@ -net-wireless/wireless-tools -sys-apps/iproute -sys-apps/pcmcia-cs -net-misc/nforce-net -linux-wlan-ng -emu10k1 diff --git a/src/livecd/profiles/lw-ut2003/x-setup b/src/livecd/profiles/lw-ut2003/x-setup deleted file mode 100644 index dc5c7b5189..0000000000 --- a/src/livecd/profiles/lw-ut2003/x-setup +++ /dev/null @@ -1,79 +0,0 @@ -#!/bin/bash -#first, get paths right if we're getting started b4 login -source /etc/profile - -echo "0" > /proc/sys/kernel/printk -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "agpgart" ] - then - modprobe agpgart > /dev/null 2>&1 - fi -done - -GLTYPE=nvidia -#now, for the key component :) -modprobe nvidia > /dev/null 2>&1 -if [ "`lsmod | cut -f1 -d\" \" | grep ^nvidia$`" = "nvidia" ] -then - echo "NVIDIA driver loaded." -else - modprobe fglrx > /dev/null 2>&1 - if [ "`lsmod | cut -f1 -d\" \" | grep ^fglrx$`" = "fglrx" ] - then - echo "ATI driver loaded." - GLTYPE=ati - else - echo "**********************************************************" - echo "NVIDIA or ATI drivers unable to load; aborting." - echo "This demo requires modern NVIDIA or ATI graphics hardware." - echo "**********************************************************" - echo "" - if [ -e /proc/splash ] - then - echo "*******************************" - echo "Entering Vesa browser-only mode" - echo "*******************************" - sleep 3 - GLTYPE=xfree - fi - fi - -fi -opengl-update $GLTYPE - -if [ ! -e /etc/sysconfig/mouse ] -then - echo "A mouse could not be detected; aborting." - echo "Please make sure a mouse is attached to your system." - exit 1 -fi -source /etc/sysconfig/mouse - -VERTREFRESH=`ddcxinfo -vsync` - -if [ "$VERTREFRESH" = "0-0" ] -then - echo "No DDC information detected; assuming reasonable defaults." - VERTREFRESH=50-80 - HORIZSYNC=30-70 -else - HORIZSYNC=`ddcxinfo -hsync` -fi - -sed -e "s:##MOUSEPROTO##:${XMOUSETYPE}:" \ - -e "s:##MOUSEDEV##:${DEVICE}:" \ - -e "s:##VERTREFRESH##:${VERTREFRESH}:" \ - -e "s:##HORIZSYNC##:${HORIZSYNC}:" \ -/etc/X11/XF86Config.${GLTYPE} > /etc/X11/XF86Config - -#Now, we need to export LD_PATH since env-update can't do this for us (no python, -#/etc/env.d/09opengl removed... - -cp /etc/ld.so.conf.orig /etc/ld.so.conf -echo /usr/lib/opengl/${GLTYPE}/lib >> /etc/ld.so.conf -ldconfig -#time to fire up X -exec /usr/X11R6/bin/xinit - diff --git a/src/livecd/profiles/lw-ut2003/xfs-config b/src/livecd/profiles/lw-ut2003/xfs-config deleted file mode 100644 index a6bd191872..0000000000 --- a/src/livecd/profiles/lw-ut2003/xfs-config +++ /dev/null @@ -1,1314 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -# CONFIG_M68631 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_1GB is not set -CONFIG_2GB=y -# CONFIG_3GB is not set -# CONFIG_05GB is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -CONFIG_CARDBUS=y -CONFIG_TCIC=y -CONFIG_I82092=y -CONFIG_I82365=y - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -CONFIG_EVMS_GPT_SEGMENT_MGR=m -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -CONFIG_EVMS_OS2=m -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -# CONFIG_CRYPTO is not set -# CONFIG_CIPHERS is not set -# CONFIG_DIGESTS is not set -# CONFIG_CRYPTODEV is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_IPSEC is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -CONFIG_IDE_TASK_IOCTL=y -# CONFIG_IDE_TASKFILE_IO is not set -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_CMD680 is not set -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -# CONFIG_PDC202XX_BURST is not set -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_BUILD_FIRMWARE is not set -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -CONFIG_SCSI_SYM53C8XX=m -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC395x_TRMS1040=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -CONFIG_SCSI_PCMCIA=y -CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_FDOMAIN=m -CONFIG_PCMCIA_NINJA_SCSI=m -CONFIG_PCMCIA_QLOGIC=m - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -CONFIG_PCMCIA_IBMTR=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_AIRONET4500_CS=m - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_ECC is not set -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set - -# -# PCMCIA character devices -# -CONFIG_PCMCIA_SERIAL_CS=m -CONFIG_SYNCLINK_CS=m -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_PROC_CONFIG=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_DMAPI is not set -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -# CONFIG_IMON is not set - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_UHCI=y -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=y -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -# CONFIG_USB_USBDNET is not set -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -# CONFIG_USB_LCD is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Windows Applications support -# -# CONFIG_MKI is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/lw-ut2003/xinitrc b/src/livecd/profiles/lw-ut2003/xinitrc deleted file mode 100644 index e419032415..0000000000 --- a/src/livecd/profiles/lw-ut2003/xinitrc +++ /dev/null @@ -1,43 +0,0 @@ -#!/bin/bash -xsetroot -solid black -#this xinitrc uses xrandr to detect the current resolution, and then sets the appropriate -#ut2003-demo resolution. -REALX=`xrandr | grep "^\*" | awk '{ print $2 }'` -REALY=`xrandr | grep "^\*" | awk '{ print $4 }'` -OK=0 -for NEWRES in 1600x1200 1280x1024 1280x960 1024x768 800x600 640x480 512x384 320x200 -do - - NEWX=${NEWRES%%x*} - NEWY=${NEWRES##*x} - echo $NEWRES - if [ $NEWX -gt $REALX ] - then - #the NEWX is higher than our current Y res; continue.... - continue - fi - echo REALY $REALY - echo NEWY $NEWY - if [ $REALY -lt $NEWY ] - then - #our current Y res is less than our NEWY; continue... - continue - fi - #if we've gotten here, we want to use NEWXxNEWY as our aa resolution - OK=1 - break - - -done -#tweak ut2003 configuration file here -if [ "$OK" = "0" ] -then - echo ".xinitrc: couldn't identify proper America's Army resolution; exiting." - exit 1 -fi - -#test -f /proc/splash && echo "show 65535" > /proc/splash -#bsetbg /usr/share/commonbox/backgrounds/gentoo.jpg -exec /usr/sbin/gamelaunch & -#blackbox -fluxbox diff --git a/src/livecd/profiles/lw/README b/src/livecd/profiles/lw/README deleted file mode 100644 index 055e2874dc..0000000000 --- a/src/livecd/profiles/lw/README +++ /dev/null @@ -1,30 +0,0 @@ - - - - -script does : - -Add Hotplug to default runlevel ,change /etc/init.d/hotplug to run before local - -need to blacklist usbcore or will error on module load (built in kernel) - -add new user aliases: -alias cp='cp -i' -alias ls='ls --color' -alias mv='mv -i' -alias pico='nano -w' -alias rm='rm -i' - -change /etc/conf.d/net for dhcp (for hotplug) - -rm /lib/evms/libe2fsim.1.2.1.so (broken un-needed plugin that causes errors) until fixed by evms ppl - -cp lw/md /etc/init.d / add md to runlevel default (noraid boot option) - -rc-update add serial default - -mv modules.conf. > modules.conf so ppp works automagically - -cp install.txt to cdroot, change linuxrc to create symlink - -add hwsetup init - diff --git a/src/livecd/profiles/lw/add.msg b/src/livecd/profiles/lw/add.msg deleted file mode 100644 index cd364bc838..0000000000 --- a/src/livecd/profiles/lw/add.msg +++ /dev/null @@ -1,16 +0,0 @@ -At the prompt the following labels are valid -ex: label option - -800 = 800x600 framebuffer mode - -1024 = 1024x768 frambuffer mode (default) - -1280 = 1280x1024 framebuffer mode - -nofb = framebuffer mode disabled - -smp = loads a smp kernel in noframebuffer mode - -acpi = enables acpi=on + loads acpi modules during init - -memtest = boots the memory testing program diff --git a/src/livecd/profiles/lw/aux-files/1024.initrd b/src/livecd/profiles/lw/aux-files/1024.initrd Binary files differdeleted file mode 100644 index 1bb683e8a7..0000000000 --- a/src/livecd/profiles/lw/aux-files/1024.initrd +++ /dev/null diff --git a/src/livecd/profiles/lw/aux-files/1280.initrd b/src/livecd/profiles/lw/aux-files/1280.initrd Binary files differdeleted file mode 100644 index 11e25c54d4..0000000000 --- a/src/livecd/profiles/lw/aux-files/1280.initrd +++ /dev/null diff --git a/src/livecd/profiles/lw/aux-files/800.initrd b/src/livecd/profiles/lw/aux-files/800.initrd Binary files differdeleted file mode 100644 index d224b2062d..0000000000 --- a/src/livecd/profiles/lw/aux-files/800.initrd +++ /dev/null diff --git a/src/livecd/profiles/lw/aux-files/autoconfig b/src/livecd/profiles/lw/aux-files/autoconfig deleted file mode 100644 index 6c4ef053fb..0000000000 --- a/src/livecd/profiles/lw/aux-files/autoconfig +++ /dev/null @@ -1,165 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw/aux-files/Attic/autoconfig,v 1.1 2003/10/19 03:46:49 livewire Exp $ -echo "0" > /proc/sys/kernel/printk -DHCP="yes" -DETECT="yes" -PCMCIA="no" -HOTPLUG="yes" -APM="no" -ACPI="no" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "nodetect" ] - then - DETECT="no" - HOTPLUG="no" - APM="no" - ACPI="no" - fi -done -for x in $CMDLINE -do - if [ "$x" = "nodhcp" ] - then - DHCP="no" - fi -done -for x in $CMDLINE -do - if [ "$x" = "dopcmcia" ] - then - PCMCIA="yes" - fi -done -for x in $CMDLINE -do - if [ "$x" = "nohotplug" ] - then - HOTPLUG="no" - fi -done -for x in $CMDLINE -do - if [ "$x" = "doapm" ] - then - APM="yes" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "acpi=on" ] - then - APM="no" - ACPI="yes" - fi -done - - -depend() { - after local -} - -start() { -if [ "$DETECT" = "yes" ] - then - ebegin $WARN"Hardware detection started" - PC=`awk -F: '/^processor/{printf "Processor"$2" is"};/^model name/{printf $2};/^vendor_id/{printf vendor};/^cpu MHz/{printf " %dMHz",int($2)};/^cache size/{printf ","$2" Cache"};/^$/{print ""}' /proc/cpuinfo 2>/dev/null` - ebegin $GOOD"$PC" - eend - hwsetup -p >/dev/null - eend - else - ebegin $WARN"Hardware detection disabled via cmdline$NORMAL" -fi - -if [ "$APM" = "yes" ] - then - insmod apm power_off=1 >/dev/null 2>&1 && ebegin $GOOD"APM BIOS found, power management functions enabled.$NORMAL" - /etc/init.d/apmd start - eend -fi - - -if [ "$ACPI" = "yes" ] - then - insmod processor >/dev/null 2>&1 && ebegin $GOOD ACPI power management functions enabled.$NORMAL - insmod fan >/dev/null - insmod thermal >/dev/null - insmod button >/dev/null - insmod battery >/dev/null - insmod ac >/dev/null - /etc/init.d/acpid start - eend -fi - -if [ "$PCMCIA" = "yes" ] - then - ebegin $HILITE "PCMCIA enabled via cmdline" - /etc/init.d/pcmcia start -fi - -if [ "$DHCP" = "no" ] - then - sed 's/iface_eth0="dhcp"/#iface_eth0="dhcp"/' /etc/conf.d/net > /etc/conf.d/net1 - cp /etc/conf.d/net1 /etc/conf.d/net - rm /etc/conf.d/net1 - ebegin $BAD"Skipping DHCP broadcast detection as requested on boot commandline." -fi - - #Read in what hwsetup has found -[ -f /etc/sysconfig/knoppix ] && . /etc/sysconfig/knoppix - -# Mouse -if [ -n "$MOUSE_DEVICE" ] - then - ebegin $GOOD"Mouse is $HILITE$MOUSE_FULLNAME$GOOD at $HILITE$MOUSE_DEVICE$NORMAL" - eend -fi - -if [ "$HOTPLUG" = "yes" ] - then - /etc/init.d/hotplug start - else - ebegin $BAD"Hotplug disabled via cmdline$NORMAL" -fi - -if [ "$DETECT" = "no" ] - then - DHCP="no" - -fi - -if [ "$DETECT" = "yes" ] - then - NETDEVICES="`awk -F: '/eth.:|tr.:/{print $1}' /proc/net/dev 2>/dev/null`" -fi - -if [ -n "$NETDEVICES" ] - then - ebegin $GOOD"Network device$HILITE$NETDEVICES$GOOD detected,$WARN DHCP broadcasting for IP.$NORMAL" - eend - else - ebegin $BAD"No Network device auto detected.$NORMAL" - -fi - - -if [ -n "$SOUND_FULLNAME" -o -n "$SOUND_DRIVER" ] - then - ebegin $GOOD"Soundcard:" - eend - aumix -m 0 >/dev/null 2>&1 - [ -n "$SOUND_FULLNAME" ] - ebegin " $WARN$SOUND_FULLNAME" - [ -n "$SOUND_DRIVER" ] - ebegin $WARN" driver = $SOUND_DRIVER"$HILITE -fi - -sleep 6 -killall hwsetup 2>/dev/null -echo "6" > /proc/sys/kernel/printk -} diff --git a/src/livecd/profiles/lw/aux-files/checkroot b/src/livecd/profiles/lw/aux-files/checkroot deleted file mode 100644 index 3eb8571daf..0000000000 --- a/src/livecd/profiles/lw/aux-files/checkroot +++ /dev/null @@ -1,87 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw/aux-files/Attic/checkroot,v 1.1 2003/10/19 03:46:49 livewire Exp $ - - -depend() { - before * -} - -start() { - if [ ! -f /fastboot ] - then - ebegin "Remounting root filesystem read-only (if necessary)" - mount / -n -o remount,ro &>/dev/null - eend $? - - ebegin "Checking root filesystem" - if [ -f /forcefsck ] - then - ewarn "A full fsck has been forced" - ewarn "Skipping fsck; this is a livecd" -# fsck -C -f -a / - # /forcefsck isn't deleted because checkfs needs it. - # it'll be deleted in that script. - fi - if [ "$?" -eq 0 ] - then - eend 0 - elif [ "$?" -eq 1 ] - then - ewend 1 "Filesystem repaired" - else - eend 2 "Filesystem couldn't be fixed :(" - /sbin/sulogin ${CONSOLE} - /sbin/reboot -f - fi - fi - - ebegin "Remounting root filesystem read/write" - mount / -n -o remount,rw &>/dev/null - if [ "$?" -ne 0 ] - then - eend 2 "Root filesystem could not be mounted R/W :(" - /sbin/sulogin ${CONSOLE} - else - eend 0 - fi - - if [ "${BOOT}" = "yes" ] - then - # create /etc/mtab (done by forcing current mounted filesystems) - # NB: this needs to be updated if our /sbin/rc mounts change ... - > /etc/mtab - mount -f -o rw / &> /dev/null - mount -f /proc &> /dev/null - - # Remove stale backups - rm -f /etc/mtab~ /etc/mtab~~ - - # should /dev be mounted ? - if ! get_bootparam "nodevfs" && [ -e /dev/.devfsd ] - then - mount -f -t devfs none /dev &> /dev/null - fi - - # should we mount a ramdisk or tmpfs? - if ! get_bootparam "notmpfs" - then - # using tmpfs - mount -f -t tmpfs tmpfs ${svcdir} \ - -o rw,mode=0644,size=${svcsize}k &> /dev/null - else - # using a ramdisk - mount -f -t ext2 /dev/ram0 ${svcdir} -o rw &> /dev/null - fi - - if ! get_bootparam "notmpfs" && get_bootparam "ngpt" - then - # POSIX shared memory support - mount -f /dev/shm &> /dev/null - fi - fi -} - - -# vim:ts=4 diff --git a/src/livecd/profiles/lw/aux-files/config b/src/livecd/profiles/lw/aux-files/config deleted file mode 100644 index 5e7b61caa7..0000000000 --- a/src/livecd/profiles/lw/aux-files/config +++ /dev/null @@ -1,183 +0,0 @@ -servers = ( - { - address = "irc.freenode.net"; - chatnet = "freenode"; - port = "6667"; - autoconnect = "yes"; - } -); - -chatnets = { - freenode = { - type = "IRC"; - max_kicks = "4"; - max_modes = "4"; - max_msgs = "1"; - max_whois = "1"; - }; -}; - -channels = ( - { name = "#gentoo"; chatnet = "freenode"; autojoin = "yes"; }, -); - -aliases = { - J = "join"; - WJOIN = "join -window"; - WQUERY = "query -window"; - LEAVE = "part"; - BYE = "quit"; - EXIT = "quit"; - SIGNOFF = "quit"; - DESCRIBE = "action"; - DATE = "time"; - HOST = "userhost"; - LAST = "lastlog"; - SAY = "msg *"; - WI = "whois"; - WII = "whois $0 $0"; - WW = "whowas"; - W = "who"; - N = "names"; - M = "msg"; - T = "topic"; - C = "clear"; - CL = "clear"; - K = "kick"; - KB = "kickban"; - KN = "knockout"; - BANS = "ban"; - B = "ban"; - MUB = "unban *"; - UB = "unban"; - IG = "ignore"; - UNIG = "unignore"; - SB = "scrollback"; - UMODE = "mode $N"; - WC = "window close"; - WN = "window new hide"; - SV = "say Irssi $J ($V) - http://irssi.org/"; - GOTO = "sb goto"; - CHAT = "dcc chat"; - RUN = "SCRIPT LOAD"; - UPTIME = "eval exec - expr `date +%s` - \\$F | awk '{print \"Irssi uptime: \"int(\\\\\\$1/3600/24)\"d \"int(\\\\\\$1/3600%24)\"h \"int(\\\\\\$1/60%60)\"m \"int(\\\\\\$1%60)\"s\" }'"; - CALC = "exec - if which bc &>/dev/null\\; then echo '$*' | bc | awk '{print \"$*=\"$$1}'\\; else echo bc was not found\\; fi"; - SBAR = "STATUSBAR"; - INVITELIST = "mode $C +I"; - Q = "QUERY"; -}; - -statusbar = { - # formats: - # when using {templates}, the template is shown only if it's argument isn't - # empty unless no argument is given. for example {sb} is printed always, - # but {sb $T} is printed only if $T isn't empty. - - items = { - # start/end text in statusbars - barstart = "{sbstart}"; - barend = "{sbend}"; - - topicbarstart = "{topicsbstart}"; - topicbarend = "{topicsbend}"; - - # treated "normally", you could change the time/user name to whatever - time = "{sb $Z}"; - user = "{sb $cumode$N{sbmode $usermode}{sbaway $A}}"; - - # treated specially .. window is printed with non-empty windows, - # window_empty is printed with empty windows - window = "{sb $winref:$itemname{sbmode $M}}"; - window_empty = "{sb $winref{sbservertag $tag}}"; - prompt = "{prompt $[.15]itemname}"; - prompt_empty = "{prompt $winname}"; - topic = " $topic"; - topic_empty = " Irssi v$J - http://irssi.org/help/"; - - # all of these treated specially, they're only displayed when needed - lag = "{sb Lag: $0-}"; - act = "{sb Act: $0-}"; - more = "-- more --"; - }; - - # there's two type of statusbars. root statusbars are either at the top - # of the screen or at the bottom of the screen. window statusbars are at - # the top/bottom of each split window in screen. - default = { - # the "default statusbar" to be displayed at the bottom of the window. - # contains all the normal items. - window = { - disabled = "no"; - - # window, root - type = "window"; - # top, bottom - placement = "bottom"; - # number - position = "1"; - # active, inactive, always - visible = "active"; - - # list of items in statusbar in the display order - items = { - barstart = { priority = "100"; }; - time = { }; - user = { }; - window = { }; - window_empty = { }; - lag = { priority = "-1"; }; - act = { priority = "10"; }; - more = { priority = "-1"; alignment = "right"; }; - barend = { priority = "100"; alignment = "right"; }; - }; - }; - - # statusbar to use in inactive split windows - window_inact = { - type = "window"; - placement = "bottom"; - position = "1"; - visible = "inactive"; - items = { - barstart = { priority = "100"; }; - window = { }; - window_empty = { }; - more = { priority = "-1"; alignment = "right"; }; - barend = { priority = "100"; alignment = "right"; }; - }; - }; - - # we treat input line as yet another statusbar :) It's possible to - # add other items before or after the input line item. - prompt = { - type = "root"; - placement = "bottom"; - # we want to be at the bottom always - position = "100"; - visible = "always"; - items = { - prompt = { priority = "-1"; }; - prompt_empty = { priority = "-1"; }; - # treated specially, this is the real input line. - input = { priority = "10"; }; - }; - }; - - # topicbar - topic = { - type = "root"; - placement = "top"; - position = "1"; - visible = "always"; - items = { - topicbarstart = { priority = "100"; }; - topic = { }; - topic_empty = { }; - topicbarend = { priority = "100"; alignment = "right"; }; - }; - }; - }; -}; -settings = { - core = { real_name = "Gentoo User"; user_name = "GentooUser"; nick = "gentoouser"; }; -}; diff --git a/src/livecd/profiles/lw/aux-files/freeramdisk.c b/src/livecd/profiles/lw/aux-files/freeramdisk.c deleted file mode 100644 index da82fba115..0000000000 --- a/src/livecd/profiles/lw/aux-files/freeramdisk.c +++ /dev/null @@ -1,32 +0,0 @@ -#include <stdio.h> -#include <string.h> -#include <sys/mount.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <fcntl.h> -#include <sys/ioctl.h> -#include <errno.h> - -main(int argc, char **argv) -{ - char rname[256]="/dev/ram"; - char b[256]; - int f; - if (argv[1]) strcpy(rname,argv[1]); - -#if 0 /* don't use on a living system, /etc/mtab is not updated */ - if (umount(rname) && (errno != ENOENT)) { - sprintf(b,"freeramdisk: cannot umount %s %d",rname,errno); - perror(b); - exit(1); - } -#endif - - if ((f=open(rname,O_RDWR)) == -1) { - sprintf(b,"freeramdisk: cannot open %s",rname); - perror(b); - exit(1); - } - ioctl(f,BLKFLSBUF); - close(f); -} diff --git a/src/livecd/profiles/lw/aux-files/fstab b/src/livecd/profiles/lw/aux-files/fstab deleted file mode 100644 index e56343886f..0000000000 --- a/src/livecd/profiles/lw/aux-files/fstab +++ /dev/null @@ -1,8 +0,0 @@ -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw/aux-files/Attic/fstab,v 1.1 2003/10/19 03:46:49 livewire Exp $ - -# /etc/fstab: static file system information. -proc /proc proc defaults 0 0 -tmpfs /dev/shm tmpfs defaults 0 0 - diff --git a/src/livecd/profiles/lw/aux-files/hosts b/src/livecd/profiles/lw/aux-files/hosts deleted file mode 100644 index 4da3032548..0000000000 --- a/src/livecd/profiles/lw/aux-files/hosts +++ /dev/null @@ -1,11 +0,0 @@ -# -# hosts This file describes a number of hostname-to-address -# mappings for the TCP/IP subsystem. It is mostly -# used at boot time, when no name servers are running. -# On small systems, this file can be used instead of a -# "named" name server. Just add the names, addresses -# and any aliases to this file... -# - -127.0.0.1 localhost -192.168.1.2 cdimage diff --git a/src/livecd/profiles/lw/aux-files/hotplug b/src/livecd/profiles/lw/aux-files/hotplug deleted file mode 100644 index b5905056e3..0000000000 --- a/src/livecd/profiles/lw/aux-files/hotplug +++ /dev/null @@ -1,47 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# /space/gentoo/cvsroot/gentoo-x86/sys-apps/hotplug/files/hotplug.rc,v 1.2 2002/02/25 23:02:14 woodchip Exp -echo "0" > /proc/sys/kernel/printk -depend() { - need modules -} - -checkconfig() { - if [ ! -d /etc/hotplug ] ; then - eerror "Hotplug requires scripts & configs in /etc/hotplug !" - return 1 - fi -} - -start() { - local error - checkconfig || return 1 - ebegin $GOOD"Starting USB and PCI hotplugging" - for RC in /etc/hotplug/*.rc - do - $RC start - error=$? - if [ $error -ne 0 ] ; then - eend ${error} "hotplug script $RC failed at start" - return 1 - fi - done - eend -} - -stop() { - local error - ebegin "Stopping USB and PCI hotplugging" - for RC in /etc/hotplug/*.rc - do - $RC stop - error=$? - if [ $error -ne 0 ] ; then - eend ${error} "hot plug script $RC failed at stop" - return 1 - fi - done - eend -} - diff --git a/src/livecd/profiles/lw/aux-files/inittab b/src/livecd/profiles/lw/aux-files/inittab deleted file mode 100644 index e1c475ae51..0000000000 --- a/src/livecd/profiles/lw/aux-files/inittab +++ /dev/null @@ -1,47 +0,0 @@ -# -# inittab This file describes how the INIT process should set up -# the system in a certain run-level. -# -# Author: Miquel van Smoorenburg, <miquels@cistron.nl> -# Modified by: Patrick J. Volkerding, <volkerdi@ftp.cdrom.com> -# Modified by: Daniel Robbins, <drobbins@gentoo.org> -# -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw/aux-files/Attic/inittab,v 1.1 2003/10/19 03:46:49 livewire Exp $ - -# -# Default runlevel. - -id:3:initdefault: - -# System initialization (runs when system boots). -#DE:S12345:respawn:/sbin/devfsd /dev -fg -# Script to run when going single user (runlevel 1). -~~:S:wait:/sbin/sulogin - -si:S:sysinit:/sbin/rc boot -l0:0:wait:/sbin/rc shutdown -l1:1:wait:/sbin/rc single -l2:2:wait:/sbin/rc nonetwork -l3:3:wait:/sbin/rc default -l4:4:wait:/sbin/rc default -l5:5:wait:/sbin/rc default -l6:6:wait:/sbin/rc reboot -z6:6:respawn:/sbin/sulogin - -# TERMINALS -c1:12345:respawn:/sbin/mingetty --noclear --autologin root tty1 -c2:12345:respawn:/sbin/mingetty --noclear --autologin root tty2 -c3:12345:respawn:/sbin/mingetty --noclear --autologin root tty3 -c4:12345:respawn:/sbin/mingetty --noclear --autologin root tty4 - -# What to do at the "Three Finger Salute". -ca:12345:ctrlaltdel:/sbin/shutdown -r now - -# Used by /etc/init.d/xdm to control DM startup. -# Read the comments in /etc/init.d/xdm for more -# info. Do NOT remove, as this will start nothing -# extra at boot if /etc/init.d/xdm is not added -# to the "default" runlevel. -x:a:once:/etc/X11/startDM.sh - -# End of /etc/inittab diff --git a/src/livecd/profiles/lw/aux-files/install.txt b/src/livecd/profiles/lw/aux-files/install.txt deleted file mode 100644 index c6df3c24af..0000000000 --- a/src/livecd/profiles/lw/aux-files/install.txt +++ /dev/null @@ -1,1482 +0,0 @@ - - Gentoo Linux 1.4_rc2 and 1.4_rc3 Installation Instructions - Contents: - [1. About the Install................................................. - .................] - - 1.About the Install - - This new boot CD will boot from nearly any modern IDE CD-ROM drive, as - well as many SCSI CD-ROM, assuming that your CD-ROM and BIOS both - support booting. Included on the CD-ROM is Linux support for IDE (and - PCI IDE) (built-in to the kernel) as well as support for all SCSI - devices (available as modules.) In addition, we provide modules for - literally every kind of network card that Linux supports, as well as - tools to allow you to configure your network and establish outbound - (as well as inbound) ssh connections and download files. - - To install from the build CD, you will need to have a 486+ processor - and ideally at least 64 Megabytes of RAM. (Gentoo Linux has been - successfully built with 64MB of RAM + 64MB of swap space, but the - build process is awfully slow under those conditions.) - - Gentoo Linux can be installed using one of three "stage" tarball - files. The one you choose depends on how much of the system you want - to compile yourself. The stage1 tarball is used when one wants to - bootstrap and build the entire system from scratch. The stage2 tarball - is used for building the entire system from scratch, except for the - bootstrap part which is already performed for you. And the stage3 - tarball already contains a basic Gentoo Linux system that has been - optimized for your system. - - So, how does one begin the install process? First, you'll want to - decide which one of our LiveCD ISO images to grab from - [3]http://www.ibiblio.org/gentoo/releases/1.4_rc2/x86/. In this - directory, you'll see several subdirectories such as athlon for each - of our various architecture-specific builds. Here's a low-down on each - arch directory and what it contains: - Architecture Description - x86 Stage 1 tarballs and "gentoo-basic" liveCD -- will work on - anything. - i586 Stage 2 and 3 tarballs, GRP packages and liveCD for i586+ CPUs - i686 Stage 2 and 3 tarballs, GRP packages and liveCD for i686+ CPUs - athlon Stage 2 and 3 tarballs, GRP packages and liveCD for AMD Athlon - CPUs - athlon-xp Stage 2 and 3 tarballs, GRP packages and liveCD for AMD - Athlon XP CPUs - athlon-mp Stage 2 and 3 tarballs, GRP packages and liveCD for AMD - Athlon MP CPUs - pentium3 Stage 2 and 3 tarballs, GRP packages and liveCD for Intel - Pentium III and Pentium 4 CPUs - - Inside each of these directories, you'll find a livecd/ directory that - contains LiveCDs. While these LiveCDs will boot on any architecture, - the install-related tarballs are optimized for a particular CPU type - and will not work on all systems, except for the "gentoo-basic" LiveCD - in the x86 directory which can be used to install on anything. - - The LiveCDs are full CD images that should be burned to a CDR or CD-RW - using CD burning software. Currently, we have two types of LiveCDs. - The first carries the "gentoo-basic" label, and is approximately 40MB - in size and lives in the x86/livecd/ directory. This LiveCD is of - minimal size to allow for a initial quick download and contains a - stage1 tarball that can be found in /mnt/cdrom/gentoo/ after the CD - has booted. - - The second flavor of LiveCD we currently offer is labelled - "livecd-grp." These CDs (found in their respective arch/livecd - directories) contain stage1, 2 and 3 tarballs, and also contain a set - of GRP packages optimized for a specific architecture. GRP is simply - precompiled packages for very large applications, such as XFree86. - KDE, GNOME, OpenOffice, etc. Using these LiveCDs, it will be possible - for you to install a fully-functional Gentoo Linux system very - quickly. The downside is that these ISO images are large -- around - 600MB -- so they can take a while to download. - If for some reason your install gets interrupted at some point, you - can reboot and restart. For example, if you have partitioned, - installed the stageX tarball, and are ready to chroot, you can restart - the install if necessary. Just re-boot with the LiveCD, then mount - your drives/partitions to /mnt as normal. Basically, you can do this - at about any point during the install, just not before partitioning - for obvious reasons. - - Warning: If you encounter a problem with any part of the install and - wish to report it as a bug, report it to [4]http://bugs.gentoo.org. If - the bug needs to be moved upstream to the package maintainers (ie KDE) - the developers will take care of that. - - Now, let's quickly review the install process. First, we'll download, - burn and boot a LiveCD. After getting a root prompt, we'll create - partitions, create our filesystems, and extract either a stage1, - stage2 or stage3 tarball. If we are using a stage1 or stage2 tarball, - we will take the appropriate steps to get our systems to stage3. Once - our systems are at stage3, we can configure them (tweaking config - files, installing a bootloader, etc) and boot them and have a - fully-functional Gentoo Linux system. Depending on what stage of the - build process you're starting from, here's what's required for - installation: - stage tarball requirements for installation - 1 partition/filesystem setup, emerge sync, bootstrap, emerge system, - emerge linux sources, final configuration - 2 partition/filesystem setup, emerge sync, emerge system, emerge linux - sources, final configuration - 3 partition/filesystem setup, emerge sync, final configuration - - 2.Booting - - Start by booting the LiveCD. If detected properly, you should see a - fancy boot screen with the Gentoo Linux logo on it. At this screen, - you can hit Enter to begin the boot process, hit F2 for help, or pass - kernel boot options by typing gentoo opt1 opt2, etc. Once you hit - Enter, you'll be greeted with a lot of text output followed by the - normal Gentoo Linux boot sequence. You will be automatically logged in - as "root" and the root password will be set to a random string for - security purposes. You should have a root ("#") prompt on the current - console, and can also open new root consoles by pressing Alt-F2, - Alt-F3 and Alt-F4. Get back to the one you started on by pressing (you - guessed it) Alt-F1. - - You've probably also noticed that above your # prompt is a bunch of - help text explaining how to do things like configure your network - devices and where you can find the Gentoo Linux stage tarballs and - packages on your CD. - - 3.Load Kernel Modules - - If the PCI autodetection missed some of your hardware, you will have - to load the appropriate modules manually. To view a list of all - available network card modules, type ls - /lib/modules/*/kernel/drivers/net/*. To load a particular module, - type: - - Code listing 3.1: PCI Modules Configuration -# modprobe pcnet32 -(replace pcnet32 with your NIC module) - - Now, if you want to be able to access any SCSI hardware that wasn't - detected during the initial boot autodetection process, you'll need to - load the appropriate modules from /lib/modules, again using modprobe: - - Code listing 3.2: Loading SCSI Modules -# modprobe aic7xxx -# modprobe sd_mod - - aic7xxx supports your SCSI controller and sd_mod supports SCSI hard - disks. - - Note: Support for a SCSI CD-ROMs and disks are built-in in the kernel. - - If you are using hardware RAID, you'll need to load the ATA-RAID - modules for your RAID controller. - - Code listing 3.3: Loading RAID Modules - -# modprobe ataraid -# modprobe pdcraid - (Promise Raid Controller) -# modprobe hptraid - (Highpoint Raid Controller) - - The Gentoo LiveCD should have enabled DMA on your disks, but if it did - not, hdparm can be used to set DMA on your drives. - - Code listing 3.4: Setting DMA -Replace hdX with your disk device. -# hdparm -d 1 /dev/hdX Enables DMA -# hdparm -d1 -A1 -m16 -u1 -a64 /dev/hdX Enables DMA and other safe performance- -enhancing options -# hdparm -X66 /dev/hdX Force-enables Ultra-DMA -- dangerous -- may cause some d -rives to mess up - - 4.Loading PCMCIA Kernel Modules - - If you have a PCMCIA network card, you will need to do some additional - trickery. - - Warning: To avoid problems with cardmgr, you must run it before you - enter the chroot portion of the install. - - Code listing 4.1: Loading PCMCIA Modules -# modprobe pcmcia_core -# modprobe i82365 -# modprobe ds -# cardmgr -f - - As cardmgr detects which hardware is present, your speaker should emit - a few reassuring beeps, and your PCMCIA network card should hum to - life. You can of course insert the PCMCIA card after loading cardmgr - too, if that's preferable. (Technically, you need not run cardmgr if - you know exactly which module your PCMCIA card requires. But if you - don't, loading all PCMCIA modules and see which sticks won't work, as - all PCMCIA modules load obligingly and hang around for a PCMCIA card - to drop by. cardmgr will also unload the module(s) for any card when - you remove it). - - 5.Configuring Networking - - PPPoE configuration - - Assuming you need PPPoE to connect to the internet, the livecd (any - version) has made things easy for you by including rp-pppoe. Use the - provided adsl-setup script to configure your connection. You will be - prompted for the ethernet device that is connected to your adsl modem, - your username and password, the IPs of your DNS servers, and if you - need a basic firewall or not. - - Code listing 5.1: Configuring PPPoE -# adsl-setup -# adsl-start - - If something goes wrong, double-check that you correctly typed your - username and password by looking at /etc/ppp/pap-secrets or - /etc/ppp/chap-secrets, and make sure you are using the right ethernet - device. - - Automatic Network Configuration - - The Gentoo Linux install lets you configure a working network, - allowing you to use ssh, scp, lynx, irssi or wget as needed before - even beginning the installation process. Even if you don't need to do - these things now, you should go ahead and set up networking now. Once - networking is up, Portage will be able to use your configured network - once you are inside the chroot environment (required for installing - Gentoo Linux). The simplest way to set up networking is to run our new - net-setup script. - - Code listing 5.2: Net-Setup Script - # net-setup eth0 - - Of course, if you prefer, you may still set up networking manually. - - Manual DHCP Configuration - - Network configuration is simple with DHCP; If your ISP is not using - DHCP, skip down to the static configuration section below. - - Code listing 5.3: Network configuration with DHCP - # dhcpcd eth0 - - Note: Some ISPs require you to provide a hostname. To do that, add a - -h myhostname flag to the dhcpcd command line above. - - If you receive dhcpConfig warnings, don't panic; the errors are most - likely cosmetic. Skip down to Network testing below. - - Manual Static Configuration - - We need to setup just enough networking so that we can download - sources for the system build, as well as the required localhost - interface. Type in the following commands, replacing $IFACE with your - network interface (typically eth0), $IPNUM with your IP address, - $BCAST with your broadcast address, and $NMASK with your network mask. - For the route command, replace $GTWAY with your default gateway. - - Code listing 5.4: Static IP Network Configuration -# ifconfig $IFACE $IPNUM broadcast $BCAST netmask $NMASK -# /sbin/route add -net default gw $GTWAY netmask 0.0.0.0 metric 1 - - Now it's time to create the /etc/resolv.conf file so that name - resolution (finding Web/FTP sites by name, rather than just by IP - address) will work. - - Here's a template to follow for creating your /etc/resolv.conf file: - - Code listing 5.5: /etc/resolv.conf template -domain mydomain.com -nameserver 10.0.0.1 -nameserver 10.0.0.2 - - Replace 10.0.0.1 and 10.0.0.2 with the IP addresses of your primary - and secondary DNS servers respectively. - - Proxy Configuration - - If you are behind a proxy, it is necessary to configure your proxy - before you continue. We will export some variables to set up the proxy - accordingly. - - Code listing 5.6: Setting a Proxy -# export http_proxy="machine.company.com:1234" -# export ftp_proxy="$http_proxy" -# export RSYNC_PROXY="$http_proxy" - - Network Testing - - Now that your network has been configured, the /sbin/ifconfig -a - command should show that your network card is working (look for UP and - RUNNING in the output). - - Code listing 5.7: /sbin/ifconfig for a working network card -eth0 Link encap:Ethernet HWaddr 00:50:BA:8F:61:7A - inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0 - inet6 addr: fe80::50:ba8f:617a/10 Scope:Link - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:1498792 errors:0 dropped:0 overruns:0 frame:0 - TX packets:1284980 errors:0 dropped:0 overruns:0 carrier:0 - collisions:1984 txqueuelen:100 - RX bytes:485691215 (463.1 Mb) TX bytes:123951388 (118.2 Mb) - Interrupt:11 - - You may want to also try pinging your ISP's DNS server (found in - /etc/resolv.conf), and a website of choice, just to make sure that - your packets are reaching the net, DNS name resolution is working - correctly, etc. - - Code listing 5.8: Further Network Testing - # ping www.some_website.com - - Networking is go! - - Networking should now be configured and useable. You should be able to - use the included ssh, scp, lynx, irssi and wget commands to connect to - other machines on your LAN or the Internet. - - 6.Partition Configuration - - Now that the kernel can see the network card and disk controllers, - it's time to set up disk partitions for Gentoo Linux. - - Here's a quick overview of the standard Gentoo Linux partition layout. - We're going to create at least three partitions: a swap partition, a - root partition (to hold the bulk of Gentoo Linux), and a special boot - partition. The boot partition is designed to hold the GRUB or LILO - boot loader information as well as your Linux kernel(s). The boot - partition gives us a safe place to store everything related to booting - Linux. During normal day-to-day Gentoo Linux use, your boot partition - should remain unmounted. This prevents your kernel from being made - unavailable to GRUB (due to filesystem corruption) in the event of a - system crash, preventing the chicken-and-egg problem where GRUB can't - read your kernel (since your filesystem isn't consistent) but you - can't bring your filesystem back to a consistent state (since you - can't boot!) - - Now, on to filesystem types. Right now, you have five filesystem - options: XFS, ext2, ext3 (journaling), jfs, and ReiserFS. ext2 is the - tried and true Linux filesystem but doesn't have metadata journaling. - ext3 is the new version of ext2 with both metadata journaling and - ordered data writes, effectively providing data journaling as well. - ReiserFS is a B*-tree based filesystem that has very good small file - performance, and greatly outperforms both ext2 and ext3 when dealing - with small files (files less than 4k), often by a factor of 10x-15x. - ReiserFS also scales extremely well and has metadata journaling. As of - kernel 2.4.18+, ReiserFS is finally rock-solid and highly recommended. - XFS is a filesystem with metadata journaling that is fully supported - under Gentoo Linux's xfs-sources kernel, but is generally not - recommended due to its tendency to lose recently-modified data if your - system locks up or unexpectedly reboots (due to a power failure, for - instance.) Finially, jfs is IBM's own high performance journaling - filesystem. Since it is obscure, we cannot comment either positvely - nor negatively on its stability. - - If you're looking for the most standard filesystem, use ext2. If - you're looking for the most rugged journalled filesystem, use ext3. If - you're looking for a high-performance filesystem with journaling - support, use ReiserFS; both ext3 and ReiserFS are mature and refined. - Here are our basic recommended filesystem sizes and types: - Partition Size Type example device - boot partition, containing kernel(s) and boot information 100 - Megabytes ext2/3 highly recommended (easiest); if ReiserFS then mount - with -o notail /dev/hda1 - swap partition (no longer a 128 Megabyte limit) Generally, unless you - are running a server, swapspace can be pretty flexible. Please consult - the below table for some loose guidelines on swap space. Linux swap - /dev/hda2 - root partition, containing main filesystem (/usr, /home, etc) >=1.5 - Gigabytes ReiserFS, ext3 recommended; ext2 ok /dev/hda3 - Physical RAM Swapspace Size - 0-48MB RAM 048-064MB RAM 064MB-128MB RAM 128-256MB RAM 256-512MB RAM - 720MB 702MB 640MB 256MB - - Before creating filesystems, you may want to initialize the beginning - of your HD using dd. Doing this will ensure that your new filesystem - will not be mis-indentified by Linux's mounting code. This can be done - as follows: - - Code listing 6.1: Initializing first 1024 Sectors of HD -# dd if=/dev/zero of=/dev/hdxy bs=1K count=1 -Replace /dev/hdxy with the device you wish to "clean." - - Warning: The command above will destroy all data from /dev/hdxy. Be - careful and check twice which partition you specify for zeroing. If - you make a mistake it might result in a loss of data. - - At this point, create your partitions using fdisk. Note that your - partitions should be of type 82 if swap and 83 for regular filesystems - (whether ReiserFS, ext2/3 or other). - - Note: cfdisk is included on the install CD, and it is considerably - easier to use than fdisk. Just type cfdisk to run it; by default, - cfdisk will work with /dev/hda. If /dev/hda is not the hard disk you - want to partition, give the right value to cfdisk as a parameter. For - example: cfdisk /dev/hde - - Note: If fdisk or cfdisk instruct you to do so, please reboot to allow - your system to detect the new partition configuration. - - Note: If you are using RAID your partitions will be a little - different. You will have the partitions like this: - /dev/ataraid/discX/partY X is the arrays you have made, so if you only - have made 1 array, then it will be disc0.Y is the partition number as - in /dev/hdaY - - Once you've created your partitions, it's time to initialize the - filesystems that will be used to house our data. Initialize swap as - follows: - - Code listing 6.2: Initializing Swap - # mkswap /dev/hda2 - - You can use the mke2fs command to create ext2 filesystems. - - Code listing 6.3: Creating an ext2 Filesystem - # mke2fs /dev/hda1 - - To create an XFS filesystem, use the mkfs.xfs command. - - Code listing 6.4: Creating a XFS Filesystem - # mkfs.xfs /dev/hda3 - - Note: You may want to add a couple of additional flags to the mkfs.xfs - command: -d agcount=3 -l size=32m. The -d agcount=3 command will lower - the number of allocation groups. XFS will insist on using at least 1 - allocation group per 4 GB of your partition, so, for example, if you - hava a 20 GB partition you will need a minimum agcount of 5. The -l - size=32m command increases the journal size to 32 Mb, increasing - performance. - - Warning: If you are installing an XFS partition over a previous - ReiserFS partition, later attempts to mount may fail without an - explicit mount -t xfs. The solution is to zero out the partition - before creating the XFS filesystem: dd if=/dev/zero of=/dev/hdx bs=1k. - - If you'd like to use ext3, you can create ext3 filesystems using - mke2fs -j. - - Code listing 6.5: Creating an ext3 Filesystem - # mke2fs -j /dev/hda3 - - Note: You can find out more about using ext3 under Linux 2.4 at - [5]http://www.zip.com.au/~akpm/linux/ext3/ext3-usage.html. - - To create ReiserFS filesystems, use the mkreiserfs command. - - Code listing 6.6: Creating a ReiserFS Filesystem - # mkreiserfs /dev/hda3 - - To create JFS filesystems, use the mkfs.jfs comamnd. - - Code listing 6.7: Creating a JFS Filesystem - # mkfs.jfs /dev/hda3 - - 7.Mount Partitions - - Now, we'll activate our new swap, since we may need the additional - virtual memory that provides later: - - Code listing 7.1: Activating Swap - # swapon /dev/hda2 - - Next, we'll create the /mnt/gentoo and /mnt/gentoo/boot mountpoints, - and we'll mount our filesystems to these mountpoints. - - Code listing 7.2: Creating Mount Points -# mkdir /mnt/gentoo -# mount /dev/hda3 /mnt/gentoo -# mkdir /mnt/gentoo/boot -# mount /dev/hda1 /mnt/gentoo/boot - - If you are setting up Gentoo Linux with a separate /usr or /var, these - would get mounted to /mnt/gentoo/usr and /mnt/gentoo/var, - respectively. - - Important: If your boot partition (the one holding the kernel) is - ReiserFS, be sure to mount it with the -o notail option so GRUB gets - properly installed. Make sure that notail ends up in your new - /etc/fstab boot partition entry, too. We'll get to that in a bit. - - Important: If you are having problems mounting your boot partition - with ext2, try using mount /dev/hXX /mnt/gentoo/boot -t ext2 - - 8.Obtaining the Desired 'stage-x' Tarball - - If you are using a GRP CD to install, you already have all of the - stage tarballs available on the CD. If this is the case, copy the - tarball of your choice to /mnt/gentoo - - Alternatively, if you do not have a GRP CD, the stage1 tarball is - still available on the CD in /mnt/cdrom/gentoo. You will have to - download the other stages though, and the best place to download those - to is /mnt/gentoo. - - Code listing 8.1: Downloading Required Stages -# cd /mnt/gentoo -Use lynx to get the URL for your tarball: -# lynx http://www.ibiblio.org/pub/Linux/distributions/gentoo/releases/1.4_rc2/x -86/ -Use Up and Down arrows keys (or the TAB key) to go to the right directory -Highlight the appropriate stage you want to download -Press d which will initiate the download -Save the file and quit the browser - -OR use wget from the command line: -# wget insert URL to the required stage tarball here. - - 9.Unpacking the Stage Tarballs - - Now it's time to extract the compressed stage tarball of your choice - to /mnt/gentoo. Then, we'll chroot over to the new Gentoo Linux build - installation to "enter" the new Gentoo Linux system. - - Important: Be sure to use the p option with tar. Forgetting to do this - will cause certain files to have incorrect permissions. - - If you are using the "from scratch, build everything" install method, - you will want to use the stage1-ix86-1.4_beta.tbz2 image. If you're - using one of our bigger CDs, you'll also have a choice of a stage2 and - stage3 image. These images allow you to save time at the expense of - configurability (we've already chosen compiler optimizations and - default USE variables for you.) - - Code listing 9.1: Unpacking the Stages -# cd /mnt/gentoo -# tar -xvjpf /mnt/cdrom/gentoo/stage?-*.tbz2 -# mount -o bind /proc /mnt/gentoo/proc - - -# cp /etc/resolv.conf /mnt/gentoo/etc/resolv.conf - - If you are going to use GRP, now would be a good time to execute the - following commands: - - Code listing 9.2: Getting ready for GRP -# mkdir /mnt/gentoo/GRP -# mount -o bind /mnt/cdrom/gentoo/packages /mnt/gentoo/GRP - - Code listing 9.3: Entering the chroot Environment -# chroot /mnt/gentoo /bin/bash -# env-update -Regenerating /etc/ld.so.cache... -# source /etc/profile -The above points your shell to the new paths and updated binaries. - - After you execute these commands, you'll be "inside" your new Gentoo - Linux environment. - - 10.Getting the Current Portage Tree using Rsync - - Now, you'll need to run emerge sync. This will make sure that you have - the most current copy of the Portage tree. - - Code listing 10.1: Updating Using Rsync - -# emerge sync -# export CONFIG_PROTECT="-*" -# export USE="-* bootstrap build" -# emerge portage -# unset USE - - The Portage tree will be downloaded and stored in /usr/portage; it's - about 90Mb in size without tarballs. - - Note: The export CONFIG_PROTECT="-*" line ensures that any new scripts - installed to /etc will overwrite the old scripts (stored in - sys-apps/baselayout), bypassing Portage's new config file management - support. Type emerge --help config for more details. - - 11.Setting Gentoo optimizations (make.conf) - - Now that you have a working copy of the Portage tree, people using - stage1 to install will need to bootstrap their Gentoo Linux system as - follows. First edit the file /etc/make.conf. In this file, you should - set your USE flags, which specify optional functionality that you - would like to be built into packages; generally, the defaults (an - empty or unset USE variable) are fine. More information on USE flags - can be found [6]here. A complete list of current USE flags can be - found [7]here. - - You also should set appropriate CHOST, CFLAGS and CXXFLAGS settings - for the kind of system that you are creating (commented examples can - be found further down in the file.) Your best friend is man gcc to - figure out what additional CFLAGS and CXXFLAGS are available. Search - for 'Optimization'. - - If necessary, you can also set proxy information here if you are - behind a firewall. - - Code listing 11.1: Setting make.conf Options - # nano -w /etc/make.conf (Adjust these settings) - - Note: People who need to substantially tweak the build process should - take a look at the /etc/make.globals file. This file comprises gentoo - defaults and should never be touched. If the defaults do not suffice, - then new values should be put in /etc/make.conf, as entries in - make.conf override the entries in make.globals. If you're interested - in tweaking USE settings, look in /etc/make.profile/make.defaults. If - you want to turn off any USE settings found here, add an appropriate - USE="-foo" in /etc/make.conf (to turn off the foo USE setting.) - - 12.Starting from Stage1 - - The stage1 tarball is for ultimate tweakage. If you have picked this - tarball, you are most likely looking to have an uber-optimized system. - Have fun, because optimization is what Gentoo Linux is all about! - - Now, it's time to start the "bootstrap" process. This process takes - about two hours on my 1200Mhz AMD Athlon system. During this time, the - extracted build image will be prepped for compiling the rest of the - system. The GNU compiler suite will be built, as well as the GNU C - library. These are time consuming builds and make up the bulk of the - bootstrap process. - - Code listing 12.1: Bootstrapping -# cd /usr/portage -# scripts/bootstrap.sh - - The "bootstrap" process will now begin. - - Note: Portage by default uses /var/tmp during package building, often - using several hundred megabytes of temporary storage. If you would - like to change where Portage stores these temporary files, set a new - PORTAGE_TMPDIR before starting the bootstrap process, as follows: - - Code listing 12.2: Changing Portage's Storage Path - # export PORTAGE_TMPDIR="/otherdir/tmp" - - bootstrap.sh will build binutils, gcc, gettext, and glibc, rebuilding - binutils, gcc, and gettext after glibc. Needless to say, this process - takes a while. Have a nice nap. Once this process completes, your - system will be equivalent to a "stage2" system, which means you can - now move on to the stage2 instructions. - - 13.Starting from Stage2 - - The stage2 tarball already has the bootstrapping done for you. All - that you have to do is install the rest of the system. - - Note: If you haven't done so, please edit /etc/make.conf to your - flavor. - - Code listing 13.1: Installing the Rest of the System -# emerge -p system - [lists the packages to be installed] -# emerge system - - It's going to take a while to finish building the entire base system. - Your reward is that it will be thoroughly optimized for your system. - The drawback is that you have to find a way to keep yourself occupied - for some time to come. The author suggests "Star Wars - Super Bombad - Racing" for the PS2. - - When this process completes, your system will be the equivalent of a - stage3 system. You have a couple of choices on how to continue at this - point. You can move onto the stage3 instructions and complete those. - Doing that will get your system right up to date with what is in the - current Portage tree. This is not necessary, but it is highly - recommended. If you do not choose to get up to date with the stage3 - instructions, you can move onto the GRP install section. If you do not - wish to use GRP, you can move onto [8]Chapter 16: Final Steps. - - 14.Starting from Stage3 - - The stage3 tarball is already configured for your system. There is not - much to do for this stage, but it is a very good idea to update your - system to the newest available packages. - - Note: If you have not already edited /etc/make.conf to fit your - specifications, now would be a good time to do so. - - Code listing 14.1: Getting up-to-date - # emerge sync - # emerge -up world - lists [packages] to be installed - # emerge -u world - - Once you complete this step, you have some options on how to continue. - If you are going to be using GRP, please move onto the GRP section. If - you are not going to use GRP, you may continue onto [9]Chapter 16: - Final Steps. - - 15.Using GRP - - You can take advantage of pre-built GRP package sets to avoid - compiling certain popular and large packages. Currently, we provide - full builds of everything you need for openoffice-bin, GNOME, KDE and - xfree. - - First, you will need to cd to the location of the packages directory. - We have already mounted the directory at /GRP. In that directory you - will find the grp-install.sh script, an All directory that contains - all of the binary packages, and a list of available GRP packages. To - install any/all of these package sets you should do the following: - - Code listing 15.1: Using GRP -# cd /GRP -# sh grp-install.sh <list of package lists> -where <list of package lists> may be any of the *-list.txt files found in the s -ame directory. - - grp-install.sh can be run multiple times without replacing existing - installations. You can do a sh grp-install.sh for a basic usage - description if you are still a bit foggy. - - 16.Setting your Timezone - - At this point, you should have system that's ready for final - configuration. We'll start the configuration process by setting the - timezone. By setting the timezone before building the kernel we ensure - that users get reasonable uname -a output. - - Look for your timezone (or GMT if you using Greenwich Mean Time) in - /usr/share/zoneinfo. Then, make a symbolic link by typing: - - Code listing 16.1: Creating a symbolic link for timezome - # ln -sf /usr/share/zoneinfo/path/to/timezonefile /etc/localtime - - You might also want to check /etc/rc.conf to make sure your timezone - settings are correct. - - 17.Installing the kernel and a System Logger - - Note: If you haven't done so, please edit /etc/make.conf to your - flavor. - - You now need to merge Linux source ebuilds. Here are the ones we - currently offer: - ebuild description - gentoo-sources Our own performance and functionality-enhanced kernel - does not include XFS support. - xfs-sources Highly-compatible kernel with XFS support. - openmosix-sources A stock Linux kernel source tree patched with - support for the GPL [10]openMosix load-balancing/clustering technology - usermode-sources A stock Linux kernel source tree patched with support - for User-Mode Linux. ("Linux inside Linux" technology) - vanilla-sources A stock Linux kernel source tree, just like you'd get - from kernel.org - - Warning: If you are configuring your own kernel, be careful with the - grsecurity option. Being too aggressive with your security settings - can cause certain programs (such as X) to not run properly. If in - doubt, leave it out. - - Choose a kernel and then merge as follows: - - Code listing 17.1: Emerging Kernel Sources - # emerge sys-kernel/gentoo-sources - - Once you have a Linux kernel source tree available, it's time to - compile your own custom kernel. - - Please note that /usr/src/linux is a symlink to your current emerged - kernel source package, which is set automatically by Portage at emerge - time. If you have multiple kernel source packages, it is necessary to - set the /usr/src/linux symlink to the correct one before proceeding. - - Code listing 17.2: Compiling the Linux Kernel -# cd /usr/src/linux -# source /etc/profile -Again, this updates your paths. If you get an error saying gcc is not found, -this is what you may have to do. -# make menuconfig -# make dep && make clean bzImage modules modules_install -# mv /boot/bzImage /boot/bzImage.orig -[if bzImage already exists] -# cp /usr/src/linux/arch/i386/boot/bzImage /boot - - Warning: For your kernel to function properly, there are several - options that you will need to ensure are in the kernel proper -- that - is, they should be enabled and not compiled as modules. You will need - to enable the "Code maturity level options --> Prompt for development - and/or incomplete code/drivers" option to see several of these - selections. Under the "File systems" section, be sure to enable the - "/dev" file system support (note that you don't need to enable the - "/dev/pts file system support" option). You'll also need to enable the - "Virtual Memory Filesystem". Be sure to enable "ReiserFS" if you have - any ReiserFS partitions; the same goes for "Ext3". If you're using - XFS, enable the "SGI XFS filesystem support" option. It's always a - good idea to leave ext2 enabled whether you are using it or not. Also, - most people using IDE hard drives will want to enable the "USE DMA by - default" option; otherwise, your IDE drives may perform very poorly. - Of course, remember to enable "IDE disk" support as well -- otherwise - your kernel won't be able to see your IDE disks. - - If you are using hardware RAID you will need to enable a couple more - options in the kernel: For Highpoint RAID controllers select hpt366 - chipset support, support for IDE RAID controllers and Highpoint 370 - software RAID.For Promise RAID controllers select PROMISE - PDC202{46|62|65|67|68|69|70} support, support for IDE RAID controllers - and Support Promise software RAID (Fasttrak(tm)) - - If you use PPPoE to connect to Internet, you will need the following - options in the kernel (built-in or as preferably as modules) : "PPP - (point-to-point protocol) support", "PPP support for async serial - ports", "PPP support for sync tty ports". The two compression options - won't harm but are not definitely needed, neither does the "PPP over - Ethernet" option, that might only be used by rp-pppoe when configured - to do kernel mode PPPoE. - - If you have an IDE cd burner, then you need to enable SCSI emulation - in the kernel. Turn on "ATA/IDE/MFM/RLL support" ---> "IDE, ATA and - ATAPI Block devices" ---> "SCSI emulation support" (I usually make it - a module), then under "SCSI support" enable "SCSI support", "SCSI - CD-ROM support" and "SCSI generic support" (again, I usually compile - them as modules). If you also choose to use modules, then echo -e - "ide-scsi\nsg\nsr_mod" >> /etc/modules.autoload to have them - automatically added at boot time. - - Note: For those who prefer it, it is now possible to install Gentoo - Linux with a 2.2 kernel. However, doing this comes at a price: you - will lose many of the nifty features that are new to the 2.4 series - kernels (such as XFS and tmpfs filesystems, iptables, and more), - although the 2.2 kernel sources can be patched with ReiserFS and devfs - support. Gentoo linux boot scripts require either tmpfs or ramdisk - support in the kernel, so 2.2 kernel users need to make sure that - ramdisk support is compiled in (ie, not a module). It is vital that a - gentoo=notmpfs flag be added to the kernel line in - /boot/grub/grub.conf for the 2.2 kernel so that a ramdisk is mounted - for the bootscripts instead of tmpfs. If you choose not to use devfs, - then gentoo=notmpfs,nodevfs should be used instead. - - Your new custom kernel (and modules) are now installed. Now you need - to choose a system logger that you would like to install. We offer - sysklogd, which is the traditional set of system logging daemons. We - also have msyslog and syslog-ng as well as metalog. Power users seem - to gravitate away from sysklogd (not very good performance) and - towards the newer alternatives. If in doubt, you may want to try - metalog, since it seems to be quite popular. To merge your logger of - choice, type one of the next four lines: - - Code listing 17.3: Emerging System Logger of Choice -# emerge app-admin/sysklogd -# rc-update add sysklogd default -or -# emerge app-admin/syslog-ng -# rc-update add syslog-ng default -or -# emerge app-admin/metalog -# rc-update add metalog default -or -# emerge app-admin/msyslog -# rc-update add msyslog default - - Warning: In the case of syslog-ng you need to create - /etc/syslog-ng/syslog-ng.conf. See /etc/syslog-ng for a sample - configuration file. - - Important: Metalog flushes output to the disk in blocks, so messages - aren't immediately recorded into the system logs. If you are trying to - debug a daemon, this performance-enhancing behavior is less than - helpful. When your Gentoo Linux system is up and running, you can send - metalog a USR1 signal to temporarily turn off this message buffering - (meaning that tail -f /var/log/everything/current will now work in - real time, as expected), and a USR2 signal to turn buffering back on - again. If you want to disable buffering permanently, you can change - METALOG_OPTS="-B" to METALOG_OPTS="-B -s" in /etc/conf.d/metalog. - - Now, you may optionally choose a cron package that you'd like to use. - Right now, we offer dcron, fcron and vcron. If you don't know which - one to choose, you might as well grab vcron. They can be installed as - follows: - - Code listing 17.4: Choosing a CRON Daemon -# emerge sys-apps/dcron -# crontab /etc/crontab -or -# emerge sys-apps/fcron -# crontab /etc/crontab -or -# emerge sys-apps/vcron -You do not need to run crontab /etc/crontab if using vcron. -Don't forget to add your *cron to the proper init level. -# rc-update add *cron default - - For more information on starting programs and daemons at startup, see - the [11]rc-script guide. - - 18.Installing miscellany necessary packages - - If you need rp-pppoe to connect to the net, be aware that at this - point it has not been installed. It would be the good time to do it. - - Code listing 18.1: Installing rp-pppoe - # USE="-X" emerge rp-pppoe - - Note: The USE="-X" prevents pppoe from installing its optional X - interface, which is a good thing, because X and its dependencies would - also be emerged. You can always recompile rp-pppoe with X support - later. - - Note: Please note that the rp-pppoe is built but not configured. You - will have to do it again using adsl-setup when you boot into your - Gentoo system for the first time. - - You may need to install some additional packages in the Portage tree - if you are using any optional features like XFS, ReiserFS or LVM. If - you're using XFS, you should emerge the xfsprogs package: - - Code listing 18.2: Emerging Filesystem Tools -# emerge sys-apps/xfsprogs -If you'd like to use ReiserFS, you should emerge the ReiserFS tools: -# emerge sys-apps/reiserfsprogs -If you'd like to use JFS, you should emerge the JFS tools: -# emerge jfsutils -If you're using LVM, you should emerge the lvm-user package: -# emerge sys-apps/lvm-user - - If you're a laptop user and wish to use your PCMCIA slots on your - first real reboot, you'll want to make sure you install the pcmcia-cs - package. - - Code listing 18.3: Emerging PCMCIA-cs - # emerge sys-apps/pcmcia-cs - - Warning: You will have to re-emerge pcmcia-cs after installation to - get PCMCIA to work. - - 19.Modifying /etc/fstab for your machine - - Your Gentoo Linux system is almost ready for use. All we need to do - now is configure a few important system files and install the GRUB - boot loader. The first file we need to configure is /etc/fstab. - Remember that you should use the notail option for your boot partition - if you chose to create a ReiserFS filesystem on it. Remember to - specify ext2, ext3 or reiserfs filesystem types as appropriate. - - Use something like the /etc/fstab listed below, but of course be sure - to replace "BOOT", "ROOT" and "SWAP" with the actual block devices you - are using (such as hda1, etc.) - - Code listing 19.1: Editing fstab -# /etc/fstab: static file system information. -# -# noatime turns off atimes for increased performance (atimes normally aren't -# needed; notail increases performance of ReiserFS (at the expense of storage -# efficiency). It's safe to drop the noatime options if you want and to -# switch between notail and tail freely. - -# <fs> <mountpoint> <type> <opts> <dump/pass> - -# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts. - -/dev/BOOT /boot ext2 noauto,noatime 1 2 -/dev/ROOT / ext3 noatime 0 1 -/dev/SWAP none swap sw 0 0 -/dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,ro 0 0 -proc /proc proc defaults 0 0 - - Warning: Please notice that /boot is NOT mounted at boottime. This is - to protect the data in /boot from corruption. If you need to access - /boot, please mount it! - - 20.Setting the Root Password - - Before you forget, set the root password by typing: - - Code listing 20.1: Setting the root Password - # passwd - - You will also want to add a non-root user for everyday use. Please - consult the [12]Gentoo FAQ. - - 21.Setting your Hostname - - Edit this file so that it contains your fully-qualified domain name on - a single line, i.e. mymachine.mydomain.com. - - Code listing 21.1: Configuring Hostname - # echo mymachine.mydomain.com > /etc/hostname - - 22.Modifying /etc/hosts - - This file contains a list of ip addresses and their associated - hostnames. It's used by the system to resolve the IP addresses of any - hostnames that may not be in your nameservers. Here's a template for - this file: - - Code listing 22.1: Hosts Template -127.0.0.1 localhost -# the next line contains your IP for your local LAN, and your associated machin -e name -192.168.1.1 mymachine.mydomain.com mymachine - - Note: If you are on a DHCP network, it might be helpful to set - localhost to your machine's actual hostname. This will help GNOME and - many other programs in name resolution. - - 23.Final Network Configuration - - Add the names of any modules that are necessary for the proper - functioning of your system to /etc/modules.autoload file (you can also - add any options you need to the same line.) When Gentoo Linux boots, - these modules will be automatically loaded. Of particular importance - is your ethernet card module, if you happened to compile it as a - module: - - Code listing 23.1: /etc/modules.autoload -This is assuming that you are using a 3com card. - Check /lib/modules/`uname -r`/kernel/drivers/net for your card. - -3c59x - - Edit the /etc/conf.d/net script to get your network configured for - your first boot: - - Code listing 23.2: Boottime Network Configuration -# nano -w /etc/conf.d/net -# rc-update add net.eth0 default - - If you have multiple network cards you need to create additional - net.ethx scripts for each one (x = 1, 2, ...): - - Code listing 23.3: Multiple Network Interfaces -# cd /etc/init.d -# cp net.eth0 net.ethx -# rc-update add net.ethx default - - If you have a PCMCIA card installed, have a quick look into - /etc/init.d/pcmcia to verify that things seem all right for your - setup, then add this line to the top of /etc/init.d/net.ethx: - - Code listing 23.4: PCMCIA depend in /etc/init.d/net.ethx -depend() { - need pcmcia -} - - This makes sure that the PCMCIA drivers are autoloaded whenever your - network is loaded. - - 24.Final steps: Configure Basic Settings (including the international - keymap setting) - - Code listing 24.1: Basic Configuration - # nano -w /etc/rc.conf - - Follow the directions in the file to configure the basic settings. All - users will want to make sure that CLOCK is set to his/her liking. - International keyboard users will want to set the KEYMAP variable - (browse /usr/share/keymaps to see the various possibilities). - - 25.Configure a Bootloader - - Notes - - In the spirit of Gentoo, users now have more than one bootloader to - choose from. Using our virtual package system, users are now able to - choose between both GRUB and LILO as their bootloaders. - - Please keep in mind that having both bootloaders installed is not - necessary. In fact, it can be a hinderance, so please only choose one. - - Important: If you are installing Gentoo Linux on a system with an - NVIDIA nForce or nForce2 chipset with an integrated GeForce graphics - card, you should use LILO and avoid GRUB. With on-board video enabled, - the low memory area of your RAM is used as video RAM. Since GRUB also - uses low memory at boot time, it will experience an "out of memory" - condition. So, if you have an nForce or potentially other board with - on-board video, use LILO. Even if you're using off-board video right - now, it'd be nice to be able to remove the graphics card and use the - on-board video in a pinch, wouldn't it? :) - - Configuring GRUB - - The most critical part of understanding GRUB is getting comfortable - with how GRUB refers to hard drives and partitions. Your Linux - partition /dev/hda1 is called (hd0,0) under GRUB. Notice the - parenthesis around the hd0,0 - they are required. Hard drives count - from zero rather than "a", and partitions start at zero rather than - one. Be aware too that with the hd devices, only harddrives are - counted, not atapi-ide devices such as cdrom players, burners, and - that the same construct can be used with scsi drives. (Normally they - get higher numbers than ide drives except when the bios is configured - to boot from scsi devices.) Assuming you have a harddrive on /dev/hda, - a cdrom player on /dev/hdb, a burner on /dev/hdc and a second hardrive - on /dev/hdd, for example, and no scsi harddrive /dev/hdd7 gets - translated to (hd1,6). It might sound tricky, and tricky it is indeed, - but as we will see, grub offers a tab completion mechanism that comes - handy for those of you having a lot of harddrives and partitions and - who are a little lost in the grub numbering scheme. Having gotten the - feel for that, it's time to install GRUB. - - The easiest way to install GRUB is to simply type grub at your - chrooted shell prompt: - - Code listing 25.1: Installing GRUB -# emerge grub -# grub - - Important: If you are using hardware RAID this part will not work at - this time. Skip to the section on making your grub.conf. After that we - will complete the grub setup for RAID controllers - - You'll be presented with the grub> grub command-line prompt. Now, you - need to type in the right commands to install the GRUB boot record - onto your hard drive. In my example configuration, I want to install - the GRUB boot record on my hard drive's MBR (master boot record), so - that the first thing I see when I turn on the computer is the GRUB - prompt. In my case, the commands I want to type are: - - Code listing 25.2: GRUB on the MBR -grub> root (hd0,0) // Your boot partition -grub> setup (hd0) // Where the boot record is installed, here, it is the MBR - - Code listing 25.3: GRUB not on the MBR -Alternatively, if you wanted to install the bootloader somewhere other than the - MBR -grub> root (hd0,0) // Your boot partition -grub> setup (hd0,4) // Where the boot record is installed, here it is /dev/hda5 -grub> quit - - Here's how the two commands work. The first root ( ) command tells - GRUB the location of your boot partition (in our example, /dev/hda1 or - (hd0,0) in GRUB terminology. Then, the second setup ( ) command tells - GRUB where to install the boot record - it will be configured to look - for its special files at the root ( ) location that you specified. In - my case, I want the boot record on the MBR of the hard drive, so I - simply specify /dev/hda (also known as (hd0)). If I were using another - boot loader and wanted to set up GRUB as a secondary boot-loader, I - could install GRUB to the boot record of a particular partition. In - that case, I'd specify a particular partition rather than the entire - disk. Once the GRUB boot record has been successfully installed, you - can type quit to quit GRUB. - - Note: The tab completion mechanism of grub can be used from within - grub, assuming you wrote root ( and that you hit the TAB key, you - would be prompted with a list of the available devices (not only - harddrives), hitting the TAB key having written root (hd, grub would - print the available harddrives and hitting the TAB key after writing - root (hd0, would make grub print the list of partitions on the first - harddrive. Checking the syntax of the grub location with completion - should really help to make the right choice. - - Gentoo Linux is now installed, but we need to create the - /boot/grub/grub.conf file so that we get a nice GRUB boot menu when - the system reboots. Here's how to do it. - - Important: To ensure backwards compatibility with GRUB, make sure to - make a link from grub.conf to menu.lst. You can do this by doing ln -s - /boot/grub/grub.conf /boot/grub/menu.lst . - - Now, create the grub.conf file (nano -w /boot/grub/grub.conf), and add - the following to it: - - Code listing 25.4: Grub.conf for GRUB -default 0 -timeout 30 -splashimage=(hd0,0)/boot/grub/splash.xpm.gz - -title=My example Gentoo Linux -root (hd0,0) -kernel (hd0,0)/boot/bzImage root=/dev/hda3 - - #Below is for setup using hardware RAID -title=My Gentoo Linux on RAID -root (hd0,0) -kernel (hd0,0)/boot/bzImage root=/dev/ataraid/dXpY - -# Below needed only for people who dual-boot -title=Windows NT Workstation -root (hd0,5) -chainloader (hd0,5)+1 - - Note: (hd0,0) should be written without any spaces inside the - parentheses. - - Important: If you set up scsi emulation for an IDE cd burner earlier, - then to get it to actually work you need to add an "hdx=ide-scsi" - fragment to the kernel line in grub.conf (where "hdx" should be the - device for your cd burner). - - After saving this file, Gentoo Linux installation is complete. - Selecting the first option will tell GRUB to boot Gentoo Linux without - a fuss. The second part of the grub.conf file is optional, and shows - you how to use GRUB to boot a bootable Windows partition. - - Note: Above, (hd0,0) should point to your "boot" partition (/dev/hda1 - in our example config) and /dev/hda3 should point to your root - filesystem. (hd0,5) contains the NT boot loader. - - Note: The path to the kernel image is relative to the boot partition. - If for example you have separated boot partition (hd0,0) and root - partition (hd0,1), all paths in the grub.conf file above will become - /bzImage. - - If you need to pass any additional options to the kernel, simply add - them to the end of the kernel command. We're already passing one - option (root=/dev/hda3), but you can pass others as well. In - particular, you can turn off devfs by default (not recommended unless - you know what you're doing) by adding the gentoo=nodevfs option to the - kernel command. - - Note: Unlike in earlier versions of Gentoo Linux, you no longer have - to add devfs=mount to the end of the kernel line to enable devfs. In - rc6 devfs is enabled by default. - - Configuring LILO - - While GRUB may be the new alternative for most people, it is not - always the best choice. LILO, the LInuxLOader, is the tried and true - workhorse of Linux bootloaders. Here's how to install LILO if you - would like to use it instead of GRUB: - - The first step is to emerge LILO: - - Code listing 25.5: Emerging LILO - # emerge lilo - - Now it is time to configure LILO. I will give you a small lilo.conf to - use, and I will explain the different parts of the file. - - Code listing 25.6: Example lilo.conf -boot=/dev/hda -map=/boot/map -install=/boot/boot.b -prompt -timeout=50 -message=/boot/message -lba32 -default=linux - -image=/boot/vmlinuz-2.4.20 - label=linux - read-only - root=/dev/hda5 - -#For dual booting windows/other OS -other=/dev/hda1 - label=dos - - * boot=/dev/hda tells LILO to install itself on the first - hard disk on the first IDE controller. - * map=/boot/map states the map file. In normal use, this should not - be modified. - * install=/boot/boot.b tells LILO to install the specified file as - the new boot sector. In normal use, this should not be altered. If - the install line is missing, LILO will assume a default of - /boot/boot.b as the file to be used. - * The existence of prompt tells LILO to show you whatever is - referenced in the message line. While it is not recommended that - you remove the prompt line, if you do remove it, you can still get - a prompt by holding down the [Shift] key while your machine starts - to boot. - * timeout=50 sets the amount of time that LILO will wait for user - input before proceeding with booting the default line entry. This - is measured in tenths of a second, with 50 as the default. - * message=/boot/message refers to the screen that LILO displays to - let you select the operating system or kernel to boot. - * lba32 describes the hard disk geometry to LILO. Another common - entry here is linear. You should not change this line unless you - are very aware of what you are doing. Otherwise, you could put - your system in an unbootable state. - * default=linux refers to the default operating system for LILO to - boot from the options listed below this line. The name linux - refers to the label line below in each of the boot options. - * image=/boot/vmlinuz-2.4.20 specifies the linux kernel to boot with - this particular boot option. - * label=linux names the operating system option in the LILO screen. - In this case, it is also the name referred to by the default line. - * read-only specifies that the root partition (see the root line - below) is read-only and cannot be altered during the boot process. - * root=/dev/hda5 tells LILO what disk partition to use as the root - partition. - - Note: Thanks to [13]Redhat.com for this information. - - After you have edited your lilo.conf file, it is time to run LILO to - load the information into the MBR: - - Code listing 25.7: Running LILO - # /sbin/lilo - - LILO is configured, and now your machine is ready to boot into Gentoo - Linux! - - 26.Creating Bootdisks - - GRUB Bootdisks - - It is always a good idea to make a boot disk the first time you - install any Linux distribution. This is a security blanket, and - generally not a bad thing to do. If you are using some kinds of - hardware RAID, you may need make a GRUB boot disk. With these types of - hardware RAID, if you try to install grub from your chrooted shell it - will fail. If you are in this camp, make a GRUB boot disk, and when - you reboot the first time you can install GRUB to the MBR. Make your - bootdisk like this: - - Code listing 26.1: Creating a GRUB Bootdisk -# mke2fs /dev/fd0 -# mount /dev/fd0 /mnt/floppy -# mkdir -p /mnt/floppy/boot/grub -# cp /usr/share/grub/i386-pc/stage1 /mnt/floppy/boot/grub/ -# cp /usr/share/grub/i386-pc/stage2 /mnt/floppy/boot/grub/ -# umount /mnt/floppy -# grub - -grub> root (fd0) -grub> setup (fd0) -grub> quit - - Now reboot and load the floppy. At the floppy's grub> prompt, you can - now execute the necessary root and setup commands. - - LILO Bootdisks - - If you are using LILO, it is also a good idea to make a bootdisk: - - Code listing 26.2: Making a LILO Bootdisk -# dd if=/boot/your_kernel of=/dev/fd0 -This will only work if your kernel is smaller than 1.4MB - - 27.Installation Complete! - - Now, Gentoo Linux is installed. The only remaining step is to exit the - chrooted shell, update necessary configuration files, safely unmount - your partitions and reboot the system: - - Code listing 27.1: Rebooting the System -# etc-update -# exit -// This exits the chrooted shell; you can also type ^D -# cd / -# umount /mnt/gentoo/boot -# umount /mnt/gentoo/proc -# umount /mnt/gentoo/dev -# umount /mnt/gentoo -# reboot - - Note: After rebooting, it is a good idea to run the update-modules - command to create the /etc/modules.conf file. Instead of modifying - this file directly, you should generally make changes to the files in - /etc/modules.d. - - Important: Remember if you are running hardware RAID, you must use the - bootdisk for the first reboot. then go back and install grub the way - everyone else did the first time. You are done -- congratulations! - - If you have any questions or would like to get involved with Gentoo - Linux development, consider joining our gentoo-user and gentoo-dev - mailing lists (there's a "click to subscribe" link on our [14]main - page). We also have a handy [15]Desktop configuration guide that will - help you to continue configuring your new Gentoo Linux system, and a - useful [16]Portage user guide to help familiarize you with Portage - basics. You can find the rest of the Gentoo Documentation [17]here. If - you have any other questions involving installation or anything for - that matter, please check the Gentoo Linux [18]FAQ. Enjoy and welcome - to Gentoo Linux! - - 28.Gentoo-Stats - - The Gentoo Linux usage statistics program was started as an attempt to - give the developers a way to find out about their user base. It - collects information about Gentoo Linux usage to help us in set - priorities our development. Installing it is completely optional, and - it would be greatly appreciated if you decide to use it. Compiled - statistics can be viewed at [19]http://stats.gentoo.org/. - - The gentoo-stats server will assign a unique ID to your system. This - ID is used to make sure that each system is counted only once. The ID - will not be used to individually identify your system, nor will it be - mached against an IP address or other personal information. Every - precaution has been taken to assure your privacy in the development of - this system. The following are the things that we are monitoring right - now through our "gentoo-stats" program: - * installed packages and their version numbers - * CPU information: speed (MHz), vendor name, model name, CPU flags - (like "mmx" or "3dnow") - * memory information (total available physical RAM, total available - swap space) - * PCI cards and network controller chips - * the Gentoo Linux profile your machine is using (that is, where the - /etc/make.profile link is pointing to). - - We are aware that disclosure of sensitive information is a threat to - most Gentoo Linux users (just as it is to the developers). - * Unless you modify the gentoo-stats program, it will never transmit - sensitive information such as your passwords, configuration data, - shoe size... - * Transmission of your e-mail addresses is optional and turned off - by default. - * The IP address your data transmission originates from will never - be logged in such a way that we can identify you. There are no "IP - address/system ID" pairs. - - The installation is easy - just run the following commands: - - Code listing 28.1: Installing gentoo-stats -# emerge gentoo-stats // Installs gentoo-stats -# gentoo-stats --new // Obtains a new system ID - - The second command above will request a new system ID and enter it - into /etc/gentoo-stats/gentoo-stats.conf automatically. You can view - this file to see additional configuration options. - - After that, the program should be run on a regular schedule - (gentoo-stats does not have to be run as root). Add this line to your - crontab: - - Code listing 28.2: Updating gentoo-stats with cron - 0 0 * * 0,4 /usr/sbin/gentoo-stats --update > /dev/null - - The gentoo-stats program is a simple perl script which can be viewed - with your favortive pager or editor: /usr/sbin/gentoo-stats. - line - Updated 26 Feb 2003 - line - [20]Daniel Robbins - Chief Architect - Chris Houser - Author - [21]Jerry Alexandratos - Author - [22]Grant Goodyear - Ghost - [23]John P. Davis - Editor - [24]Pierre-Henri Jondot - Editor - [25]Eric Stockbridge - Editor - [26]Rajiv Manglani - Editor - [27]Jungmin Seo - Editor - [28]Stoyan Zhekov - Editor - line - Summary: These instructions step you through the process of installing - Gentoo Linux 1.4_rc2 and 1.4_rc3. The Gentoo Linux installation - process supports various installation approaches, depending upon how - much of the system you want to custom-build from scratch. - line - - Donate to support our development efforts. - Make payments with PayPal - it's fast, free and secure! - line - [29]Win4Lin at NeTraverse - - Win4Lin from NeTraverse lets you run Windows applications under Gentoo - Linux at native speeds. [30]Purchase Win4Lin "Gentoo Edition" and - you'll also get a special Gentoo discount. Every sale also helps - support Gentoo Linux development :) - line - [31]DDR Memory at Crucial.com - - Purchase RAM from Crucial.com and a percentage of your sale will go - towards further Gentoo Linux development. - line - Copyright 2001-2003 Gentoo Technologies, Inc. Questions, Comments, - Corrections? Email [32]www@gentoo.org. - -References - - 1. http://www.gentoo.org/ - 2. http://www.gentoo.org/ - 3. http://www.ibiblio.org/gentoo/releases/1.4_rc2/x86/ - 4. http://bugs.gentoo.org/ - 5. http://www.zip.com.au/~akpm/linux/ext3/ext3-usage.html - 6. http://www.gentoo.org/doc/en/use-howto.xml - 7. http://www.gentoo.org/dyn/use-index.xml - 8. http://www.gentoo.org/doc/en/gentoo-x86-install.xml#doc_chp16 - 9. http://www.gentoo.org/doc/en/gentoo-x86-install.xml#doc_chp16 - 10. http://www.openmosix.com/ - 11. http://www.gentoo.org/doc/en/rc-scripts.xml - 12. http://www.gentoo.org/doc/en/faq.xml - 13. http://www.redhat.com/ - 14. http://www.gentoo.org/ - 15. http://www.gentoo.org/doc/en/desktop.xml - 16. http://www.gentoo.org/doc/en/portage-user.xml - 17. http://www.gentoo.org/main/en/docs.xml - 18. http://www.gentoo.org/doc/en/faq.xml - 19. http://stats.gentoo.org/ - 20. mailto:drobbins@gentoo.org - 21. mailto:jerry@gentoo.org - 22. mailto:g2boojum@gentoo.org - 23. mailto:zhen@gentoo.org - 24. mailto:Pierre-Henri.Jondot@wanadoo.fr - 25. mailto:stocke2@gentoo.org - 26. mailto:rajiv@gentoo.org - 27. mailto:seo@gentoo.org - 28. mailto:zhware@gentoo.org - 29. http://www.netraverse.com/gentoo.htm - 30. http://www.netraverse.com/gentoo.htm - 31. http://www.qksrv.net/click-477620-5032687 - 32. mailto:www@gentoo.org diff --git a/src/livecd/profiles/lw/aux-files/local b/src/livecd/profiles/lw/aux-files/local deleted file mode 100644 index f70d5b90ee..0000000000 --- a/src/livecd/profiles/lw/aux-files/local +++ /dev/null @@ -1,78 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw/aux-files/Attic/local,v 1.1 2003/10/19 03:46:49 livewire Exp $ - -HILITE="\033[1m" -NORMAL="\033[0m" - -NET="no" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "forceloadnet" ] - then - NET="yes" - fi -done - -depend() { - after * -} - -blurb() { - echo -ne ${HILITE}${1} - #blurblen=${#1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} - -start() { - ebegin "Freeing initrd" - umount /initrd - /sbin/freeramdisk /dev/ram0 - #make our mtab look sane... - local mycdloc - mycdloc=`cat /tmp/mycd` - mycdloc=${mycdloc#/newroot*} - mount -f $mycdloc /mnt/cdrom -t iso9660 -o ro - if [ -e /mnt/livecd.cloop ] - then - mount -f /mnt/livecd.cloop /mnt/cloop -t ext2 -o ro - #cloop was cached to tmpfs so that CD could be unmounted. - else - mount -f /mnt/cdrom/livecd.cloop /mnt/cloop -t ext2 -o ro - fi - rm /tmp/mycd - mount -f tmpfs / -t tmpfs -o rw - eend - - echo "10000" > /proc/sys/fs/file-max - ebegin "Auto-scrambling root password for security" - echo root:`pwgen -s 16` | chpasswd > /dev/null 2>&1 - eend - if [ "$NET" = "yes" ] - then - ebegin "Auto-detecting network modules" - # Disable kernel messages to console: - echo "0" > /proc/sys/kernel/printk - local x - for x in /lib/modules/*/kernel/drivers/net/* - do - y=${x##*/} - y=${y%%.*} - echo -ne " ${GOOD}*${NORMAL} Scanning for ${y}..." - insmod -f ${x} > /dev/null 2>&1 - backup - done - echo "6" > /proc/sys/kernel/printk - fi -} - -stop() { - return -} - -# vim:ts=4 diff --git a/src/livecd/profiles/lw/aux-files/localstart.gl b/src/livecd/profiles/lw/aux-files/localstart.gl deleted file mode 100644 index 6c1098e430..0000000000 --- a/src/livecd/profiles/lw/aux-files/localstart.gl +++ /dev/null @@ -1,8 +0,0 @@ -# /etc/conf.d/local.start: -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw/aux-files/Attic/localstart.gl,v 1.1 2003/10/19 03:46:49 livewire Exp $ - -# This is a good place to load any misc. -# programs on startup ( 1>&2 ) - -modprobe nvidia && opengl-update nvidia && cp /etc/X11/xfree-nvidia /etc/X11/XF86Config -modprobe fglrx && opengl-update ati && cp /etc/X11/xfree-ati /etc/X11/XF86Config diff --git a/src/livecd/profiles/lw/aux-files/md b/src/livecd/profiles/lw/aux-files/md deleted file mode 100644 index 26782e16d3..0000000000 --- a/src/livecd/profiles/lw/aux-files/md +++ /dev/null @@ -1,51 +0,0 @@ -#!/sbin/runscript -# -# Script to boot up a system with autodetection of CD location -# -# Daniel Robbins <drobbins@gentoo.org> -# Copyright 2002 Gentoo Technologies, Inc. -# Distributed under the GPL - -HILITE="\033[1m" -NORMAL="\033[0m" - -RAID="yes" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "noraid" ] - then - RAID="no" - fi -done - -blurb() { - echo -ne ${1} - #blurblen=${#1} -} - -depend() { - after checkfs - after * -} - -start() { -ebegin "Loading EVMS modules" -modules_scan() { - local type - type=${1}; shift - for x in "$@" - do -# blurb "---- Loading ${x}..." - insmod -f ${x} > /dev/null 2>&1 - done -} - - -if [ "$RAID" = "yes" ] -then -DEVICE=EVMS - modules_scan evms evms evms_bbr evms_drivelink evms_passthru dos_part ldev_mgr lvm_vge md_core md_linear md_raid0 md_raid1 md_raid5 md_xor snapshot -fi -eend -} diff --git a/src/livecd/profiles/lw/aux-files/memtest b/src/livecd/profiles/lw/aux-files/memtest Binary files differdeleted file mode 100644 index c8cfeb44a4..0000000000 --- a/src/livecd/profiles/lw/aux-files/memtest +++ /dev/null diff --git a/src/livecd/profiles/lw/aux-files/modules b/src/livecd/profiles/lw/aux-files/modules deleted file mode 100644 index a7daf517e4..0000000000 --- a/src/livecd/profiles/lw/aux-files/modules +++ /dev/null @@ -1,26 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw/aux-files/Attic/modules,v 1.1 2003/10/19 03:46:49 livewire Exp $ - - -depend() { - need bootmisc localmount -} - -start() { - # Loop over every line in /etc/modules.autoload. - (cat /etc/modules.autoload; echo) | # make sure there is a LF at the end - while read module args - do - case "${module}" in - \#*|"") continue ;; - esac - ebegin " Loading module ${module}" - modprobe ${module} ${args} &>/dev/null - eend $? " Failed to load ${module}" -done -} - - -# vim:ts=4 diff --git a/src/livecd/profiles/lw/aux-files/net b/src/livecd/profiles/lw/aux-files/net deleted file mode 100644 index 975a1c00e4..0000000000 --- a/src/livecd/profiles/lw/aux-files/net +++ /dev/null @@ -1,35 +0,0 @@ -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw/aux-files/Attic/net,v 1.1 2003/10/19 03:46:49 livewire Exp $ - -# Global config file for net.* rc-scripts - -# This is basically the ifconfig argument without the ifconfig $iface -# -#iface_eth0="192.168.0.1 broadcast 192.168.0.255 netmask 255.255.255.0" -#iface_eth1="207.170.82.202 broadcast 207.0.255.255 netmask 255.255.0.0" - -# For DHCP set iface_eth? to "dhcp" -# For passing options to dhcpcd use dhcpcd_eth? -# -iface_eth0="dhcp" -#dhcpcd_eth0="..." - -# For adding aliases to a interface -# -#alias_eth0="192.168.0.3 192.168.0.4" - -# NB: The next is only used for aliases. -# -# To add a custom netmask/broadcast address to created aliases, -# uncomment and change accordingly. Leave commented to assign -# defaults for that interface. -# -#broadcast_eth0="192.168.0.255 192.168.0.255" -#netmask_eth0="255.255.255.0 255.255.255.0" - - -# For setting the default gateway -# -#gateway="eth0/192.168.0.1" - diff --git a/src/livecd/profiles/lw/aux-files/profile b/src/livecd/profiles/lw/aux-files/profile deleted file mode 100644 index 5d081d0e5b..0000000000 --- a/src/livecd/profiles/lw/aux-files/profile +++ /dev/null @@ -1,34 +0,0 @@ -# /etc/profile: -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/lw/aux-files/Attic/profile,v 1.1 2003/10/19 03:46:49 livewire Exp $ - -if [ -e "/etc/profile.env" ] -then - source /etc/profile.env -fi - -#077 would be more secure, but 022 is generally quite realistic -umask 022 -alias cp='cp -i' -alias ls='ls --color' -alias mv='mv -i' -alias pico='nano -w' -alias rm='rm -i' -if [ `/usr/bin/whoami` = 'root' ] -then - if [ "$SHELL" = '/bin/bash' ] || [ "$SHELL" = '/bin/sh' ] - then - export PS1='\[\033[01;31m\]\h \[\033[01;34m\]\W \$ \[\033[00m\]' - fi - export PATH="/bin:/sbin:/usr/bin:/usr/sbin:${ROOTPATH}" -else - if [ "$SHELL" = '/bin/bash' ] || [ "$SHELL" = '/bin/sh' ] - then - export PS1='\[\033[01;32m\]\u@\h \[\033[01;34m\]\W \$ \[\033[00m\]' - fi - export PATH="/bin:/usr/bin:${PATH}" -fi -unset ROOTPATH - -if [ -z "$INPUTRC" -a ! -f "$HOME/.inputrc" ]; then - export INPUTRC="/etc/inputrc" -fi diff --git a/src/livecd/profiles/lw/aux-files/resolv.conf b/src/livecd/profiles/lw/aux-files/resolv.conf deleted file mode 100644 index ab1cae14ce..0000000000 --- a/src/livecd/profiles/lw/aux-files/resolv.conf +++ /dev/null @@ -1 +0,0 @@ -nameserver ##NS1## diff --git a/src/livecd/profiles/lw/aux-files/xfree-nvidia b/src/livecd/profiles/lw/aux-files/xfree-nvidia deleted file mode 100644 index 384c866ad7..0000000000 --- a/src/livecd/profiles/lw/aux-files/xfree-nvidia +++ /dev/null @@ -1,290 +0,0 @@ -########################################################################## -# Sample XF86Config file for NVIDIA XFree86 drivers. -# -# Refer to the XF86Config(4/5) man page for details about the format of -# this file. -# -# Be sure to replace the monitor values with correct values for your -# monitor! -########################################################################## - - -Section "Files" - - RgbPath "/usr/X11R6/lib/X11/rgb" - FontPath "unix/:-1" - -EndSection - - -########################################################################## -# Server flags section. -########################################################################## - -Section "ServerFlags" - - # Uncomment this to cause a core dump at the spot where a signal is - # received. This may leave the console in an unusable state, but may - # provide a better stack trace in the core dump to aid in debugging - #NoTrapSignals - - # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence - # This allows clients to receive this key event. - #DontZap - - # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching - # sequences. This allows clients to receive these key events. - #DontZoom - - # This allows the server to start up even if the - # mouse device can't be opened/initialised. - AllowMouseOpenFail - -EndSection - - -########################################################################## -# Input devices -########################################################################## - -# -# Keyboard section -# -Section "InputDevice" - - Identifier "Keyboard1" - Driver "Keyboard" - Option "AutoRepeat" "250 30" - - Option "XkbRules" "xfree86" - Option "XkbModel" "pc105" - Option "XkbLayout" "us" - -EndSection - - -# -# Pointer section -# -Section "InputDevice" - - Identifier "Mouse1" - Driver "mouse" - Option "Protocol" "IMPS/2" - Option "Device" "/dev/input/mice" - Option "Buttons" "7" - Option "ZAxisMapping" "4 5" -EndSection - - -########################################################################## -# Module section -########################################################################## - -Section "Module" - - Load "dbe" - - # Load the glx module. - Load "glx" - - Load "extmod" - - Load "type1" - Load "freetype" -EndSection - - -########################################################################## -# Monitor section -########################################################################## - -Section "Monitor" - - Identifier "MyMonitor" - VendorName "Mitsubisi" - ModelName "Diamond Plus 120u" - - # be sure to replace these values with values appropriate for your - # monitor! -# HorizSync 31-82 -# VertRefresh 55-120 - -EndSection - - -########################################################################## -# Graphics device section(s) -########################################################################## - -Section "Device" - Identifier "NV AGP" - VendorName "nvidia" - Driver "nvidia" - # update this with the PCI id of your card. Consult the output - # of the 'lspci' command. -# BusID "PCI:1:0:0" - Option "NoLogo" "1" -# Option "NoDDC" "1" -EndSection - -Section "Device" - Identifier "NV PCI" - VendorName "nvidia" - Driver "nvidia" - # update this with the PCI id of your card. Consult the output - # of the 'lspci' command. - BusID "PCI:0:13:0" -EndSection - -Section "Device" - Identifier "NV AGP TwinView" - VendorName "nvidia" - Driver "nvidia" - # update this with the PCI id of your card. Consult the output - # of the 'lspci' command. - BusID "PCI:1:0:0" - - # sample twinview setup - Option "TwinView" - # be sure to replace the HorizSync and VertRefresh with correct values - # for your monitor! - Option "SecondMonitorHorizSync" "31-82" - Option "SecondMonitorVertRefresh" "55-120" - Option "TwinViewOrientation" "RightOf" - Option "MetaModes" "1280x1024,1280x1024; 1024x768,1024x768" - Option "ConnectedMonitor" "crt,crt" -EndSection - - -########################################################################## -# Screen sections -########################################################################## - -# -# screen section for an nvidia AGP card -# -Section "Screen" - Identifier "Screen AGP" - Device "NV AGP" - Monitor "MyMonitor" - DefaultColorDepth 24 - DefaultFbBpp 32 - Subsection "Display" - Depth 8 - Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x400" - EndSubsection - Subsection "Display" - Depth 16 - Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - Subsection "Display" - Depth 24 - Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - -EndSection - - -# -# screen section for an nvidia PCI card -# -Section "Screen" - Identifier "Screen PCI" - Device "NV PCI" - Monitor "MyMonitor" - DefaultColorDepth 24 - Subsection "Display" - Depth 8 - Modes "1280x1024" "1024x768" "800x600" "640x400" - EndSubsection - Subsection "Display" - Depth 16 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - Subsection "Display" - Depth 24 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection -EndSection - -# -# screen section for an nvidia AGP TwinView card -# (look at the appropriate Device section) -# -Section "Screen" - Identifier "Screen AGP TwinView" - Device "NV AGP TwinView" - Monitor "MyMonitor" - DefaultColorDepth 24 - Subsection "Display" - Depth 8 - Modes "1280x1024" "1024x768" "800x600" "640x400" - EndSubsection - Subsection "Display" - Depth 16 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - Subsection "Display" - Depth 24 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection -EndSection - - -########################################################################## -# ServerLayout sections -# (invoke using the '-layout' option of 'startx'. -########################################################################## - -# -# just one agp card -# -Section "ServerLayout" - Identifier "AGP" - Screen "Screen AGP" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# just one pci card -# -Section "ServerLayout" - Identifier "PCI" - Screen "Screen PCI" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# 2 cards, non twinview -# -Section "ServerLayout" - Identifier "Both" - Screen "Screen AGP" - Screen "Screen PCI" LeftOf "Screen AGP" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# just one agp twinview card -# -Section "ServerLayout" - Identifier "AGPTwinView" - Screen "Screen AGP TwinView" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# 2 cards, one agp twinview and one pci (3 monitors total) -# -Section "ServerLayout" - Identifier "BothTwinView" - Screen "Screen AGP TwinView" - Screen "Screen PCI" LeftOf "Screen AGP TwinView" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection diff --git a/src/livecd/profiles/lw/boot.msg b/src/livecd/profiles/lw/boot.msg deleted file mode 100644 index acc350861a..0000000000 --- a/src/livecd/profiles/lw/boot.msg +++ /dev/null @@ -1,6 +0,0 @@ -17 gentoo.lss - -Gentoo Linux 1.4 http://www.gentoo.org/ RELEASE: 1.4-Release Enter to boot -F2 for options , F3 for framebuffer information -Available kernels: gentoo, smp, acpi, memtest -or press enter for default. diff --git a/src/livecd/profiles/lw/clean b/src/livecd/profiles/lw/clean deleted file mode 100644 index 5321615372..0000000000 --- a/src/livecd/profiles/lw/clean +++ /dev/null @@ -1,55 +0,0 @@ -#!/bin/bash -if [ -z "$CD_BUILDCHROOT" ] -then - echo "Error: \$CD_BUILDCHROOT not defined." - exit 1 -fi - -#keep important C/C++/Java shared libraries -touch ${CD_BUILDCHROOT}/usr/lib/gcc-lib/*/*/*.so* -touch ${CD_BUILDCHROOT}/usr/lib/libstdc++* -touch ${CD_BUILDCHROOT}/etc/env.d/??gcc* - -mount_all -#remove extra build-related packages -chroot ${CD_BUILDCHROOT} /bin/bash -e <<EOF -source /etc/profile -emerge -C autoconf automake bin86 binutils libtool m4 bison ld.so make perl patch linux-headers man-pages || exit 1 -emerge -C sash bison flex gettext texinfo ccache addpatches man groff lib-compat python miscfiles ucl || exit 1 -EOF -#detect chroot errors: -[ $? -ne 0 ] && chroot_die "problems cleaning packages" -umount_all - -#final cleanups -for x in /var/tmp/portage /var/db /var/empty /var/cache \ -/var/lock /tmp /usr/portage /usr/share/man /usr/share/info /usr/share/unimaps \ -/usr/include /usr/share/zoneinfo /usr/share/dict /usr/share/doc /usr/share/ss /usr/share/state /usr/share/texinfo \ -/var/tmp /usr/lib/python2.2 /usr/lib/portage /usr/share/gettext /usr/share/i18n /usr/share/rfc \ -/usr/X11R6/man /usr/X11R6/include /usr/X11R6/lib/X11/config /usr/X11R6/lib/X11/etc /usr/X11R6/lib/X11/doc -do - rm -rf ${CD_BUILDCHROOT}/${x}/* ${CD_BUILDCHROOT}/${x}/.* -done -rm -rf ${CD_BUILDCHROOT}/usr/share/keymaps - -for x in /sbin/insmod.static /sbin/sln \ -/usr/X11R6/bin/Xnest \ -/usr/X11R6/bin/Xprt \ -/usr/X11R6/bin/Xvfb -do - rm ${CD_BUILDCHROOT}/${x} -done - -#clean up the kernel source tree... -rm -rf ${CD_BUILDCHROOT}/usr/src/linux* -rm -rf ${CD_BUILDCHROOT}/var/db/pkg/sys-kernel/* -rm -rf ${CD_BUILDCHROOT}/usr/lib/gcc-lib/*/*/libgcj* -rm -rf ${CD_BUILDCHROOT}/usr/lib/*.a -rm -rf ${CD_BUILDCHROOT}/lib/*.a -rm -rf ${CD_BUILDCHROOT}/usr/X11R6/lib/*.a -#remove entire directory trees (argument 1) *except* for these files/dir trees (arguments 2+) -zapmost /usr/share/terminfo l/linux v/vt100 v/vt102 n/nxterm x/xterm x/xterm-color -zapmost /usr/share/locale C en_US -zapmost /usr/X11R6/lib/X11/locale iso8859-1 iso8859-15 common en_US.UTF-8 -[ -e ${CD_BUILDCHROOT}/usr/lib/locale ] && zapmost /usr/lib/locale en_US -zapmost /usr/share/misc magic pci.ids diff --git a/src/livecd/profiles/lw/gentoo.lss b/src/livecd/profiles/lw/gentoo.lss Binary files differdeleted file mode 100644 index 6c7c89c82b..0000000000 --- a/src/livecd/profiles/lw/gentoo.lss +++ /dev/null diff --git a/src/livecd/profiles/lw/gss-config b/src/livecd/profiles/lw/gss-config deleted file mode 100644 index 1ceab33fe1..0000000000 --- a/src/livecd/profiles/lw/gss-config +++ /dev/null @@ -1,1378 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODVERSIONS=y -CONFIG_KMOD=y - -# -# Processor type and features -# -# CONFIG_LOLAT is not set -# CONFIG_LOLAT_SYSCTL is not set -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -# CONFIG_MPPRO31 is not set -# CONFIG_M68631 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MK8 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_MVIAC3_2 is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -CONFIG_TOSHIBA=m -CONFIG_I8K=m -CONFIG_THINKPAD=m -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -# CONFIG_PCMCIA is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_IBM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -# CONFIG_ACPI_HT_ONLY is not set -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -# CONFIG_EVMS_GPT_SEGMENT_MGR is not set -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -# CONFIG_EVMS_OS2 is not set -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -CONFIG_CRYPTO=m -CONFIG_CIPHERS=y -CONFIG_CIPHER_AES=m -CONFIG_CIPHER_MARS=m -CONFIG_CIPHER_RC6=m -CONFIG_CIPHER_SERPENT=m -CONFIG_CIPHER_TWOFISH=m -CONFIG_CIPHER_3DES=m -CONFIG_CIPHER_BLOWFISH=m -CONFIG_CIPHER_CAST5=m -CONFIG_CIPHER_GOST=m -CONFIG_CIPHER_IDEA=m -CONFIG_CIPHER_RC5=m -CONFIG_CIPHER_NULL=m -CONFIG_CIPHER_DES=m -CONFIG_CIPHER_DFC=m -CONFIG_CIPHER_BLOWFISH_OLD=m -CONFIG_DIGESTS=y -CONFIG_DIGEST_MD5=m -CONFIG_DIGEST_SHA1=m -CONFIG_DIGEST_RIPEMD160=m -CONFIG_DIGEST_SHA256=m -CONFIG_DIGEST_SHA384=m -CONFIG_DIGEST_SHA512=m -CONFIG_CRYPTODEV=y -CONFIG_CRYPTOLOOP=m -CONFIG_CRYPTOLOOP_ATOMIC=y -CONFIG_CRYPTOLOOP_IV_HACK=y -CONFIG_CRYPTOLOOP_DEBUG=y -CONFIG_IPSEC_TUNNEL=m - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -# CONFIG_NETFILTER is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_IPV6=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_IPSEC is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -CONFIG_BLK_DEV_ADMA100=y -CONFIG_BLK_DEV_AEC62XX=y -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_TRIFLEX=y -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX_OLD=y -# CONFIG_PDC202XX_BURST is not set -CONFIG_BLK_DEV_PDC202XX_NEW=y -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_SC1200=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIIMAGE=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_PDC202XX=y -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m -CONFIG_BLK_DEV_ATARAID_SII=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_BUILD_FIRMWARE is not set -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -# CONFIG_SCSI_SYM53C8XX is not set -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -CONFIG_SCSI_NSP32=m -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_MAX_SGE=40 -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -CONFIG_EQUALIZER=y -CONFIG_TUN=m -CONFIG_ETHERTAP=y -CONFIG_NET_SB1000=m - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_TYPHOON=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_AMD8111_ETH=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -# CONFIG_EEPRO100_PIO is not set -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_R8169=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -CONFIG_FDDI=y -CONFIG_DEFXX=m -CONFIG_SKFP=m -CONFIG_HIPPI=y -CONFIG_ROADRUNNER=m -# CONFIG_ROADRUNNER_LARGE_RINGS is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_STRIP is not set -# CONFIG_WAVELAN is not set -# CONFIG_ARLAN is not set -# CONFIG_AIRONET4500 is not set -# CONFIG_AIRONET4500_NONCS is not set -# CONFIG_AIRONET4500_PROC is not set -# CONFIG_AIRO is not set -# CONFIG_HERMES is not set -# CONFIG_PLX_HERMES is not set -# CONFIG_PCI_HERMES is not set -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_IRDA_DEBUG=y - -# -# Infrared-port device drivers -# -CONFIG_IRTTY_SIR=m -CONFIG_IRPORT_SIR=m -CONFIG_DONGLE=y -CONFIG_ESI_DONGLE=m -CONFIG_ACTISYS_DONGLE=m -CONFIG_TEKRAM_DONGLE=m -CONFIG_GIRBIL_DONGLE=m -CONFIG_LITELINK_DONGLE=m -CONFIG_MCP2120_DONGLE=m -CONFIG_OLD_BELKIN_DONGLE=m -CONFIG_ACT200L_DONGLE=m -CONFIG_MA600_DONGLE=m -CONFIG_USB_IRDA=m -CONFIG_NSC_FIR=m -CONFIG_WINBOND_FIR=m -# CONFIG_TOSHIBA_OLD is not set -CONFIG_TOSHIBA_FIR=m -CONFIG_SMC_IRCC_FIR=m -CONFIG_ALI_FIR=m -CONFIG_VLSI_FIR=m - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -CONFIG_ISDN_DRV_LOOP=m -CONFIG_ISDN_DIVERSION=m - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m -CONFIG_USB_AUERISDN=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_ECC is not set -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set - -# -# I2C support -# -CONFIG_I2C=m -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -CONFIG_I2C_MAINBOARD=y -CONFIG_I2C_ALI1535=m -CONFIG_I2C_ALI15X3=m -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_AMD756=m -CONFIG_I2C_AMD8111=m -# CONFIG_I2C_TSUNAMI is not set -CONFIG_I2C_I801=m -# CONFIG_I2C_I810 is not set -CONFIG_I2C_PIIX4=m -CONFIG_I2C_SIS5595=m -CONFIG_I2C_SIS630=m -CONFIG_I2C_SIS645=m -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_VIA is not set -CONFIG_I2C_VIAPRO=m -# CONFIG_I2C_VOODOO3 is not set -CONFIG_I2C_ISA=m -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_PROC=m - -# -# Hardware sensors support -# -CONFIG_SENSORS=y -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1024=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM9240=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_FSCPOS=m -CONFIG_SENSORS_FSCSCY=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_MAXILIFE=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_MTP008=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_SIS5595=m -CONFIG_SENSORS_SMSC47M1=m -CONFIG_SENSORS_THMC50=m -CONFIG_SENSORS_VIA686A=m -CONFIG_SENSORS_VT1211=m -CONFIG_SENSORS_VT8231=m -CONFIG_SENSORS_W83781D=m -# CONFIG_SENSORS_OTHER is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_IPMI_PANIC_EVENT is not set -# CONFIG_IPMI_DEVICE_INTERFACE is not set -# CONFIG_IPMI_KCS is not set -# CONFIG_IPMI_WATCHDOG is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_SCx200_GPIO is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -# CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -CONFIG_VXFS_FS=m -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -CONFIG_XFS_QUOTA=y -CONFIG_XFS_DMAPI=y -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_ROOT_NFS is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -CONFIG_NCP_FS=m -CONFIG_NCPFS_PACKET_SIGNING=y -CONFIG_NCPFS_IOCTL_LOCKING=y -CONFIG_NCPFS_STRONG=y -CONFIG_NCPFS_NFS_NS=y -CONFIG_NCPFS_OS2_NS=y -CONFIG_NCPFS_SMALLDOS=y -CONFIG_NCPFS_NLS=y -CONFIG_NCPFS_EXTRAS=y -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -# CONFIG_IMON is not set - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -CONFIG_VIDEO_SELECT=y -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -CONFIG_FB=y -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FB_LOGO_TUX is not set -# CONFIG_FB_LOGO_LARRY is not set -# CONFIG_FB_LOGO_GENTOO is not set -# CONFIG_FB_LOGO_G is not set -# CONFIG_FB_LOGO_PENGUIN is not set -CONFIG_FB_LOGO_POWEREDBY=y -# CONFIG_FB_RIVA is not set -# CONFIG_FB_CLGEN is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_VESA=y -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_HGA is not set -CONFIG_VIDEO_SELECT=y -# CONFIG_FB_MATROX is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_INTEL is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_FBCON_SPLASHSCREEN=y -CONFIG_FBCON_CFB16=y -# CONFIG_FBCON_ADVANCED is not set -CONFIG_FBCON_CFB8=y -CONFIG_FBCON_CFB16=y -CONFIG_FBCON_CFB24=y -CONFIG_FBCON_CFB32=y -# CONFIG_FBCON_FONTWIDTH8_ONLY is not set -# CONFIG_FBCON_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=m -CONFIG_USB_UHCI_ALT=m -CONFIG_USB_OHCI=m -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_TIGL=m -CONFIG_USB_BRLVGER=m -CONFIG_USB_LCD=m - -# -# Bluetooth support -# -CONFIG_BLUEZ=m -CONFIG_BLUEZ_L2CAP=m -CONFIG_BLUEZ_SCO=m -# CONFIG_BLUEZ_RFCOMM is not set -CONFIG_BLUEZ_BNEP=m -# CONFIG_BLUEZ_BNEP_MC_FILTER is not set -# CONFIG_BLUEZ_BNEP_PROTO_FILTER is not set - -# -# Bluetooth device drivers -# -CONFIG_BLUEZ_HCIUSB=m -# CONFIG_BLUEZ_USB_SCO is not set -# CONFIG_BLUEZ_USB_ZERO_PACKET is not set -CONFIG_BLUEZ_HCIUART=m -CONFIG_BLUEZ_HCIUART_H4=y -CONFIG_BLUEZ_HCIUART_BCSP=y -CONFIG_BLUEZ_HCIUART_BCSP_TXCRC=y -# CONFIG_BLUEZ_HCIDTL1 is not set -# CONFIG_BLUEZ_HCIBT3C is not set -# CONFIG_BLUEZ_HCIBLUECARD is not set -# CONFIG_BLUEZ_HCIBTUART is not set -CONFIG_BLUEZ_HCIVHCI=m - -# -# Windows Applications support -# -# CONFIG_MKI is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/lw/help.msg b/src/livecd/profiles/lw/help.msg deleted file mode 100644 index 9d5db1a360..0000000000 --- a/src/livecd/profiles/lw/help.msg +++ /dev/null @@ -1,21 +0,0 @@ -Gentoo Linux 1.4 LiveCD boot options - [F1 to redisplay boot graphic] -At the prompt type "gentoo option" or "smp option" -or just hit enter if no options are needed. -Press F3 for additional kernel labels - -doscsi scan for scsi devices (breaks some ethernet cards) -nodetect causes hwsetup/kudzu and hotplug not to run -dofirewire modprobes firewire modules in initrd (for firewire cdroms,etc) -nousb disables usb module load from initrd, disables hotplug -nodhcp dhcp does not automatically start if nic detected -doataraid loads ide raid modules from initrd -dopcmcia starts pcmcia service -noapm disables apm module load -noraid disables loading of evms modules -nohotplug disables loading hotplug service -ide=nodma Force disabling of dma for malfunctioning ide devices -cdcache Cache the entire runtime portion of cd in ram, This - uses 40mb of RAM , but allows you to umount /mnt/cdrom - and mount another cdrom. -noraid disables autoloading of evms modules -dokeymap enable keymap selection for non-us keyboard layouts diff --git a/src/livecd/profiles/lw/isolinux.cfg b/src/livecd/profiles/lw/isolinux.cfg deleted file mode 100644 index d0c51377f7..0000000000 --- a/src/livecd/profiles/lw/isolinux.cfg +++ /dev/null @@ -1,52 +0,0 @@ -default gentoo - -timeout 30 -prompt 1 -display boot.msg -F1 boot.msg -F2 help.msg -F3 add.msg -label gentoo - kernel gentoo -# append vga=791 splash=silent initrd=initrd.1024 acpi=off root=/dev/ram0 init=/linuxrc nomce - append root=/dev/md0 -label 800 - kernel gentoo - append vga=788 initrd=initrd.800 acpi=off root=/dev/ram0 init=/linuxrc nomce - -label 1280 - kernel gentoo - append vga=794 initrd=initrd.1280 acpi=off root=/dev/ram0 init=/linuxrc nomce - -label 1024 - kernel gentoo - append vga=791 initrd=initrd.1024 acpi=off root=/dev/ram0 init=/linuxrc nomce - -label acpi - kernel gentoo - append initrd=initrd acpi=on root=/dev/ram0 init=/linuxrc nomce - -label acpi-fb - kernel gentoo - append vga=791 initrd=initrd.1024 acpi=on root=/dev/ram0 init=/linuxrc nomce - - -label nofb - kernel gentoo - append vga=normal initrd=initrd acpi=off root=/dev/ram0 init=/linuxrc nomce - -label memtest - kernel memtest - -label smp - kernel smp - append initrd=initrd2 acpi=off root=/dev/ram0 init=/linuxrc nomce - -label smp-acpi - kernel smp - append initrd=initrd2 acpi=on root=/dev/ram0 init=/linuxrc nomce -label vaio - kernel gentoo - append ide2=0x180,0x386 vga=791 splash=silent initrd=initrd.1024 acpi=off root=/dev/ram0 init=/linuxrc nomce - - diff --git a/src/livecd/profiles/lw/kernel-config b/src/livecd/profiles/lw/kernel-config deleted file mode 100644 index 466f2a02c3..0000000000 --- a/src/livecd/profiles/lw/kernel-config +++ /dev/null @@ -1,1294 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -# CONFIG_LOLAT is not set -# CONFIG_LOLAT_SYSCTL is not set -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M686 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -# CONFIG_MK7 is not set -# CONFIG_MK8 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_THINKPAD is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_1GB is not set -CONFIG_2GB=y -# CONFIG_3GB is not set -# CONFIG_05GB is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -CONFIG_CARDBUS=y -CONFIG_TCIC=y -CONFIG_I82092=y -CONFIG_I82365=y - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -CONFIG_EVMS_GPT_SEGMENT_MGR=m -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -# CONFIG_EVMS_OS2 is not set -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -# CONFIG_CRYPTO is not set -# CONFIG_CIPHERS is not set -# CONFIG_DIGESTS is not set -# CONFIG_CRYPTODEV is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_IPSEC is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -CONFIG_IDE_TASK_IOCTL=y -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_BLK_DEV_GENERIC is not set -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_TRIFLEX=y -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_BLK_DEV_NFORCE=y -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX_OLD=y -# CONFIG_PDC202XX_BURST is not set -CONFIG_BLK_DEV_PDC202XX_NEW=y -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_SC1200=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIIMAGE=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_PDC202XX=y -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m -CONFIG_BLK_DEV_ATARAID_SII=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_BUILD_FIRMWARE is not set -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -CONFIG_SCSI_SYM53C8XX=m -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -CONFIG_SCSI_PCMCIA=y -CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_FDOMAIN=m -CONFIG_PCMCIA_NINJA_SCSI=m -CONFIG_PCMCIA_QLOGIC=m - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_MAX_SGE=40 -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_TYPHOON=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_AMD8111_ETH=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -# CONFIG_EEPRO100_PIO is not set -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_R8169=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -CONFIG_PCMCIA_IBMTR=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_AIRONET4500_CS=m - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m -CONFIG_USB_AUERISDN=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_ECC is not set -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_IPMI_PANIC_EVENT is not set -# CONFIG_IPMI_DEVICE_INTERFACE is not set -# CONFIG_IPMI_KCS is not set -# CONFIG_IPMI_WATCHDOG is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_SCx200_GPIO is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set - -# -# PCMCIA character devices -# -CONFIG_PCMCIA_SERIAL_CS=m -CONFIG_SYNCLINK_CS=m -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_PROC_CONFIG=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -# CONFIG_IMON is not set - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=y -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=y -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -# CONFIG_USB_LCD is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Windows Applications support -# -# CONFIG_MKI is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/lw/keymaps/bin-keymaps.tar.gz b/src/livecd/profiles/lw/keymaps/bin-keymaps.tar.gz Binary files differdeleted file mode 100644 index 8895ca4689..0000000000 --- a/src/livecd/profiles/lw/keymaps/bin-keymaps.tar.gz +++ /dev/null diff --git a/src/livecd/profiles/lw/keymaps/key.lst b/src/livecd/profiles/lw/keymaps/key.lst deleted file mode 100644 index 7396871474..0000000000 --- a/src/livecd/profiles/lw/keymaps/key.lst +++ /dev/null @@ -1,10 +0,0 @@ -Please select a keymap from the following list by typing in the appropriate -name or number. Hit Enter for the default "us/41" US English keymap. - - 1 azerty 7 cf 13 es 19 il 25 mk 31 ru 37 trf - 2 be 8 croat 14 et 20 is 26 nl 32 se 38 trq - 3 bg 9 cz 15 fi 21 it 27 no 33 sg 39 ua - 4 br-a 10 de 16 fr 22 jp 28 pl 34 sk-y 40 uk - 5 br-l 11 dk 17 gr 23 la 29 pt 35 sk-z 41 us - 6 by 12 dvorak 18 hu 24 lt 30 ro 36 slovene 42 wangbe - diff --git a/src/livecd/profiles/lw/linuxrc b/src/livecd/profiles/lw/linuxrc deleted file mode 100644 index c20a8a48d2..0000000000 --- a/src/livecd/profiles/lw/linuxrc +++ /dev/null @@ -1,282 +0,0 @@ -#!/bin/sh -# -# Script to boot up a system with autodetection of CD location -# -# Daniel Robbins <drobbins@gentoo.org> -# Copyright 2002 Gentoo Technologies, Inc. -# Distributed under the GPL - -PATH=/usr/sbin:/usr/bin:/sbin:/bin -BACK_UP="\033[1K\033[0G" -HILITE="\033[1m" -NORMAL="\033[0m" -WARN="\033[1m" -BAD="\033[1m" -mount -oremount,rw / -mount /proc -# Disable kernel messages to console: -echo "0" > /proc/sys/kernel/printk -SCSI="no" -CDCACHE="no" -IDEBUG="no" -FIREWIRE="no" -ATARAID="no" -PCMCIA="no" -DETECT="no" -USB="yes" -KEYMAP="no" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "doscsi" ] - then - SCSI="yes" - elif [ "$x" = "cdcache" ] - then - CDCACHE="yes" - elif [ "$x" = "idebug" ] - then - IDEBUG="yes" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "dofirewire" ] - then - FIREWIRE="yes" - fi -done -for x in $CMDLINE -do - if [ "$x" = "nousb" ] - then - USB="no" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "doataraid" ] - then - ATARAID="yes" - fi -done -for x in $CMDLINE -do - if [ "$x" = "dopcmcia" ] - then - PCMCIA="yes" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "dokeymap" ] - then - KEYMAP="yes" - fi -done - -blurb() { - echo -ne ${HILITE}${1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} - -# Create the new root FS -mkdir newroot -mount -t tmpfs tmpfs /newroot -cd /newroot -mkdir dev mnt mnt/cdrom mnt/cloop mnt/.init.d mnt/gentoo - -if [ ! -e /newroot/dev/.devfsd ] -then - #mount devfs - mount -t devfs devfs /newroot/dev -fi - -mounted="" - -initmsg() { - echo -e "${HILITE}${*}${NORMAL}" -} - -nocd() { - echo -e "${HILITE}---- CD not found${NORMAL}" - umount /newroot - ash - umount /proc - exec /linuxrc -} - -getkeymap() { - local mykeymap - echo -ne ${HILITE} - cat /keymaps/key.lst - echo -ne ${NORMAL} - read -p "Keymap selection: " mykeymap - if [ -e /keymaps/${mykeymap}.map ] - then - echo -e "${HILITE}---- Loading ${mykeymap} keymap${NORMAL}" - loadkmap < /keymaps/${mykeymap}.map - elif [ "$mykeymap" = "" ] - then - #default keymap is "us" - echo -e "${HILITE}---- Loading default (US) keymap${NORMAL}" - loadkmap < /keymaps/us.map - else - getkeymap - fi -} - -modules_scan() { - local type - type=${1}; shift - for x in "$@" - do - if [ ! -e /modules/${type}/${x}.o ] - then - echo -e "${HILITE}---- Module ${x}.o not found; skipping...${NORMAL}" - continue - fi - blurb "---- Scanning for ${x}..." - insmod -f /modules/${type}/${x}.o > /dev/null 2>&1 - if [ $? -eq 0 ] - then - backup - echo -e "${GOOD}---- Detected ${x} hardware${NORMAL}" - else - backup - echo -ne "${NORMAL}" - fi - done -} - -findmount() { - if [ "$*" = "" ] - then - nocd - fi - while ! mount -t iso9660 -r $1 /newroot/mnt/cdrom; do - shift - if [ "$1" = "" ]; then - nocd - fi - done - if [ ! -e /newroot/mnt/cdrom/livecd.cloop -a ! -e /newroot/mnt/cdrom/livecd.loop ]; then - echo -e "${HILITE}---- $1 is not a LiveCD; skipping...${NORMAL}" - umount /newroot/mnt/cdrom - shift - findmount $* - fi - mounted=$1 - echo -e "${HILITE}---- CD medium found on $1${NORMAL}" -} - -# Mount the CD -if [ "$SCSI" = "yes" ] -then -DEVICE=SCSI - echo -e "${WARN}-----------------------------------------------------------${NORMAL}" - echo -e "${WARN}-- Available boot options: doscsi nodetect dofirewire --${NORMAL}" - echo -e "${WARN}-- dokeymap noraid nousb nodhcp doataraid dopcmcia noapm --${NORMAL}" - echo -e "${WARN}-----------------------------------------------------------${NORMAL}" - echo -e "${HILITE}---- Beginning storage detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan storage ##STORAGE_MODULES## -fi - -if [ "$FIREWIRE" = "yes" ] -then -DEVICE=FIREWIRE - echo -e "${HILITE}---- Beginning firewire detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan firewire ##FIREWIRE_MODULES## -fi -if [ "$ATARAID" = "yes" ] -then -DEVICE=ATARAID - echo -e "${HILITE}---- Beginning ata detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan ataraid ##ATARAID_MODULES## -fi - -if [ "$PCMCIA" = "yes" ] -then -DEVICE=PCMCIA - echo -e "${HILITE}---- Beginning pcmcia detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan pcmcia ##PCMCIA_MODULES## -fi -if [ "$USB" = "yes" ] -then -DEVICE=USB - echo -e "${HILITE}---- Beginning usb detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan usb ##USB_MODULES## -fi - -if [ "$KEYMAP" = "yes" ] -then -getkeymap -fi - -initmsg "---- Mounting the CD" -findmount /newroot/dev/cdroms/* -if [ "$IDEBUG" = "yes" ] -then - exec /bin/sh -fi -if [ -e /newroot/mnt/cdrom/livecd.cloop ] -then - #compressed loopback - mknod /dev/cloop b 240 0 - if [ "$CDCACHE" = "yes" ] - then - initmsg "---- Attempting to cache CD image to tmpfs" - cp /newroot/mnt/cdrom/livecd.cloop /newroot/mnt/ - if [ $? -ne 0 ] - then - initmsg "---- Caching failed (likely due to lack of space" - CDCACHE="no" - rm -f /newroot/mnt/livecd.cloop - else - insmod /modules/cloop.o file=/newroot/mnt/livecd.cloop - mount -o ro -t ext2 /dev/cloop /newroot/mnt/cloop - fi - fi - if [ "$CDCACHE" = "no" ] - then - initmsg "---- Mounting compressed loopback filesystem" - insmod /modules/cloop.o file=/newroot/mnt/cdrom/livecd.cloop - mount -o ro -t ext2 /dev/cloop /newroot/mnt/cloop - fi -else - mknod /dev/loop0 b 7 0 - initmsg "---- Mounting loopback filesystem" - losetup /dev/loop0 /newroot/mnt/cdrom/livecd.loop - mount -o ro -t ext2 /dev/loop0 /newroot/mnt/cloop -fi -# Now the CD is mounted on /newroot/cdrom -initmsg "---- Copying and symlinking files from CD to populate /" - -cd /newroot/ -for x in bin sbin lib boot usr opt install.txt -do - ln -s mnt/cloop/${x} ${x} -done -mkdir initrd proc tmp -chmod 1777 tmp -(cd /newroot/mnt/cloop; cp -a etc root home var /newroot) -#store name of mounted CD so we can add it to mtab.... (/etc/init.d/local will take it -#from here... -echo $mounted > tmp/mycd - -initmsg "---- Switching to tmpfs root filesystem" -echo "6" > /proc/sys/kernel/printk -umount /proc -pivot_root . initrd -exec chroot . /sbin/init </dev/console >/dev/console 2>&1 diff --git a/src/livecd/profiles/lw/md b/src/livecd/profiles/lw/md deleted file mode 100644 index 84fc1039fc..0000000000 --- a/src/livecd/profiles/lw/md +++ /dev/null @@ -1,51 +0,0 @@ -#!/sbin/runscript -# -# Script to boot up a system with autodetection of CD location -# -# Daniel Robbins <drobbins@gentoo.org> -# Copyright 2002 Gentoo Technologies, Inc. -# Distributed under the GPL - -HILITE="\033[1m" -NORMAL="\033[0m" - -RAID="yes" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "noraid" ] - then - RAID="no" - fi -done - -blurb() { - echo -ne ${1} - #blurblen=${#1} -} - -depend() { - after checkfs - after * -} - -start() { -ebegin "Loading EVMS modules" -modules_scan() { - local type - type=${1}; shift - for x in "$@" - do -# blurb "---- Loading ${x}..." - insmod -f ${x} > /dev/null 2>&1 - done -} - - -if [ "$RAID" = "yes" ] -then -DEVICE=EVMS - modules_scan evms evms evms_bbr evms_drivelink evms_passthru dos_part ldev_mgr lvm_vge md_core md_linear md_raid0 md_raid1 md_xor snapshot -fi -eend -} diff --git a/src/livecd/profiles/lw/motd b/src/livecd/profiles/lw/motd deleted file mode 100644 index ab61ac141c..0000000000 --- a/src/livecd/profiles/lw/motd +++ /dev/null @@ -1,24 +0,0 @@ - -Welcome to the Gentoo Linux LiveCD! - -The root password on this system has been auto-scrambled for security. - -dhcpcd is automatically started if eth0 is detected, please kill if not -needed, or boot with "gentoo nodhcp" - -Type "net-setup eth0" to specify eth0 IP address settings by hand. - -/proc/config for kernel configuration. - -To start an ssh server on this system, type "/etc/init.d/sshd start". -If you need to log in remotely as root, type "passwd root" to reset -root's password to a known value. - -Stage tarball(s) and packages can be found in /mnt/cdrom/gentoo. View -installation instructions by typing "less /install.txt" or "lynx -http://www.gentoo.org/doc/en/gentoo-x86-install.xml". - -Please report any bugs you find to http://bugs.gentoo.org. Be sure to -include detailed information about how to reproduce the bug you are -reporting. Thanks for using Gentoo Linux! - diff --git a/src/livecd/profiles/lw/net-setup b/src/livecd/profiles/lw/net-setup deleted file mode 100644 index b74ed027be..0000000000 --- a/src/livecd/profiles/lw/net-setup +++ /dev/null @@ -1,32 +0,0 @@ -#!/bin/bash -[ "$1" = "" ] && echo "net-setup: please specify a network interface" && exit 1 -[ ! -d /tmp/setup.opts ] && mkdir /tmp/setup.opts -cd /tmp/setup.opts -dialog --title "Network Setup" --menu "Time to set up the $1 interface! You can use DHCP to automatically configure a network interface or you can specify an IP and related settings manually. Choose one option:" 20 60 7 0 "Use DHCP to auto-detect my network settings" 1 "Specify an IP address manually" 2> ${1}.1 -mynetsel=`cat ${1}.1` -case $mynetsel in -0) - /sbin/dhcpcd -t 10 ${1} - ;; -1) - dialog --title "IP address" --inputbox "Please enter an IP address for $1:" 20 50 "192.168.1.1" 2> ${1}.IP - dialog --title "Broadcast address" --inputbox "Please enter a Broadcast address for $1:" 20 50 "192.168.1.255" 2> ${1}.B - dialog --title "Network mask" --inputbox "Please enter a Network Mask for $1:" 20 50 "255.255.255.0" 2> ${1}.NM - dialog --title "Gateway" --inputbox "Please enter a Gateway for $1 (hit enter for none:)" 20 50 2> ${1}.GW - dialog --title "DNS server" --inputbox "Please enter a name server to use (hit enter for none:)" 20 50 2> ${1}.NS - /sbin/ifconfig $1 `cat ${1}.IP` broadcast `cat ${1}.B` netmask `cat ${1}.NM` - myroute=`cat ${1}.GW` - if [ "$myroute" != "" ] - then - /sbin/route add default gw $myroute dev $1 netmask 0.0.0.0 metric 1 - fi - myns="`cat ${1}.NS`" - if [ "$myns" = "" ] - then - : > /etc/resolv.conf - else - echo "nameserver $myns" > /etc/resolv.conf - fi - ;; -esac -echo "Type \"ifconfig\" to make sure the interface was configured correctly." diff --git a/src/livecd/profiles/lw/package.list b/src/livecd/profiles/lw/package.list deleted file mode 100644 index 39bef7d1a8..0000000000 --- a/src/livecd/profiles/lw/package.list +++ /dev/null @@ -1,66 +0,0 @@ -metalog -ncftp -dialog -lilo -grub -nvi -parted -app-arch/mt-st -sys-apps/star -dev-util/strace -sys-apps/pciutils -net-dialup/wvdial -net-www/lynx -sys-apps/raidtools -sys-apps/e2fsprogs -sys-apps/reiserfs-utils -sys-apps/hdparm -app-editors/nano -sys-apps/less -net-misc/openssh -net-misc/dhcpcd -net-fs/nfs-utils -net-irc/irssi -jfsutils -speedtouch -gpm -dosfstools -mingetty -pwgen -ucl -screen -xfsprogs -dietlibc -popt -tsocks -hotplug -#xfs-sources -gs-sources -sys-apps/partimage -=sys-apps/evms-1.2.1-r1 -iputils -kudzu -hwdata-knoppix -hwsetup -fxload -net-misc/wget -net-ftp/ftpd -mirrorselect -sys-apps/mdadm -rp-l2tp -usbutils -acpid -apmd -net-wireless/wireless-tools -sys-apps/iproute -sys-apps/pcmcia-cs -net-dialup/ppp -net-dialup/rp-pppoe -isdn4k-utils -net-misc/nforce-net -#net-misc/e100 -#net-misc/e1000 -kpnadsl4linux -pptpclient -linux-wlan-ng -sys-apps/lvm-user diff --git a/src/livecd/profiles/lw/post-clean b/src/livecd/profiles/lw/post-clean deleted file mode 100644 index 8ee2b9b26f..0000000000 --- a/src/livecd/profiles/lw/post-clean +++ /dev/null @@ -1,2 +0,0 @@ -find ${CD_BUILDCHROOT}/lib/modules -name modules.dep |xargs touch - diff --git a/src/livecd/profiles/lw/pre-clean b/src/livecd/profiles/lw/pre-clean deleted file mode 100644 index 201f40e8a0..0000000000 --- a/src/livecd/profiles/lw/pre-clean +++ /dev/null @@ -1,70 +0,0 @@ -#!/bin/bash -echo "$CD_HOSTNAME" > ${CD_BUILDCHROOT}/etc/hostname || die -#modprobe has a bug and auto-adds a "above hid keybdev mousedev" line to it's internel configuration. -#this fixes it.... -echo "above hid" > ${CD_BUILDCHROOT}/etc/modules.d/hidfix -install -d ${CD_BUILDCHROOT}/root/.irssi -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/config ${CD_BUILDCHROOT}/root/.irssi || die -rm ${CD_BUILDCHROOT}/etc/init.d/iptables -cp ${CD_BUILDCHROOT}/etc/init.d/net.eth0 ${CD_BUILDCHROOT}/etc/init.d/net.eth1 -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/modules ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/checkroot ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/md ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/autoconfig ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/local ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fstab ${CD_BUILDCHROOT}/etc || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/net-setup ${CD_BUILDCHROOT}/usr/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/profile ${CD_BUILDCHROOT}/etc || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/net ${CD_BUILDCHROOT}/etc/conf.d || die -rm -f ${CD_BUILDCHROOT}/lib/evms/libe2fsim.1.2.1.so -rm -f ${CD_BUILDCHROOT}/usr/share/hwdata/pci.ids -rm -f ${CD_BUILDCHROOT}/usr/share/hwdata/usb.ids -ln -s /usr/share/misc/pci.ids ${CD_BUILDCHROOT}/usr/share/hwdata/pci.ids -ln -s /usr/share/misc/usb.ids ${CD_BUILDCHROOT}/usr/share/hwdata/usb.ids -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/install.txt ${CD_BUILDCHROOT}/ || die -echo usbcore >> ${CD_BUILDCHROOT}/etc/hotplug/blacklist -chmod +x ${CD_BUILDCHROOT}/usr/sbin/net-setup || die -mymotd=${LIVECD_ROOT}/profiles/${CD_PROFILE}/motd -[ -e $mymotd ] && cp $mymotd ${CD_BUILDCHROOT}/etc -echo "CDBOOT=1" >> ${CD_BUILDCHROOT}/etc/rc.conf || die -echo "127.0.0.1 cdimage localhost" > ${CD_BUILDCHROOT}/etc/hosts || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/inittab ${CD_BUILDCHROOT}/etc || die -mount_all -cat > $CD_BUILDTEMP/chroot-clean << EOF -#!/bin/bash -source /etc/profile -#do our hid fix... -modules-update -cd /usr/src/linux -#produce correct module dependency information -make _modinst_post -rc-update add autoconfig default -rc-update add md default -if [ -e /etc/init.d/metalog ] -then -rc-update add metalog default -elif [ -e /etc/init.d/sysklogd ] -then -rc-update add sysklogd default -fi -#remove standard keymap support: -rc-update del keymaps -rc-update del consolefont -rc-update del iptables -rc-update add distcc default -update-modules -EOF -chmod +x $CD_BUILDTEMP/chroot-clean -chroot $CD_BUILDCHROOT /tmp/livecd/chroot-clean -[ $? -ne 0 ] && chroot_die "chroot-clean failure" -umount_all -rm -rf ${CD_BUILDCHROOT}/etc/localtime -cp ${CD_BUILDCHROOT}/usr/share/zoneinfo/GMT ${CD_BUILDCHROOT}/etc/localtime || die - -if [ -e "${LIVECD_ROOT}/profiles/${CD_PROFILE}/openglify" ] -then - source ${LIVECD_ROOT}/profiles/${CD_PROFILE}/openglify -fi - -find ${CD_BUILDCHROOT}/lib/modules -name modules.dep |xargs touch - diff --git a/src/livecd/profiles/lw/settings b/src/livecd/profiles/lw/settings deleted file mode 100644 index 5f2cb6b2f3..0000000000 --- a/src/livecd/profiles/lw/settings +++ /dev/null @@ -1,40 +0,0 @@ -source ${LIVECD_ROOT}/profiles/global/settings -CD_BUILDROOT=${CD_TEMPROOT}/${CD_PROFILE} -CD_PORTAGE_PROFILE="default-x86-1.4" -CD_USE="-wavelan pcmcia apm acpi4linux crypt ipv6 -doc -slang -X -gtk -arts -svga -directfb -ggi -esd -nas -perl -python" -CD_CFLAGS="-O2 -mcpu=i686 -pipe" -CD_CXXFLAGS="${CD_CFLAGS}" -#CD_STAGETARBALL=http://www.ibiblio.org/gentoo/releases/1.4_rc1/x86/stage3-i586-1.4_rc1.tar.bz2 -CD_STAGETARBALL=http://distro.ibiblio.org/pub/Linux/distributions/gentoo/experimental/x86/stages/stage3-x86-1.4_pre20030214.tar.bz2 -#modules to auto-detect/copy to the initrd (put in the "/modules/storage" directory) -#aic7xxx_old removed from position after aic7xxx in attempt to fix bugs #12185 and #11278 -STORAGE_MODULES="aic79xx aic7xxx aic7xxx_old BusLogic \ -ncr53c8xx NCR53c406a \ -initio advansys aha1740 aha1542 aha152x \ -atp870u dtc eata fdomain gdth \ -megaraid pas16 pci2220i pci2000 psi240i \ -qlogicfas qlogicfc qlogicisp \ -seagate t128 tmscsim u14-34f ultrastor wd7000 \ -a100u2w 3w-xxxx DAC960 NCR53c406a \ -aacraid sym53c8xx a100u2w cpqfc \ -dmx3191d dpt_i2o imm in2000 ips qla1280 \ -sim710 sym53c416" -FIREWIRE_MODULES="ieee1394 ohci1394 eth1394 sbp2" -ATARAID_MODULES="ataraid pdcraid hptraid silraid" -PCMCIA_MODULES="pcmcia_core i82365 ds ide-cs" -USB_MODULES="usbcore ehci-hcd uhci usb-ohci hid usb-storage" -LOOP_SIZE="140000" -KERNCONFIG=gss-config -CD_HOSTNAME="cdimage" -CD_PORTAGE_PROFILE="default-x86-1.4" -CD_PORTDIR="/usr/portage" -CD_ISONAME="gentoo.iso" -CD_DISTDIR="/usr/portage/distfiles" -CD_STAGELOC=/ -CD_TEMPROOT=/tmp -LOOP_MODE=cloop -ARCH=x86 -BOOTSPLASH="yes" -DISTCC_HOSTS="192.168.0.1" -MAKEOPTS="-j1" - diff --git a/src/livecd/profiles/lw/stage1-experimental b/src/livecd/profiles/lw/stage1-experimental deleted file mode 100644 index 87838616ae..0000000000 --- a/src/livecd/profiles/lw/stage1-experimental +++ /dev/null @@ -1,13 +0,0 @@ -#xfs-sources -gs-sources -sys-apps/partimage -=sys-apps/evms-1.2.1-r1 -iputils -kudzu -hwdata-knoppix -hwsetup -fxload -net-misc/wget -net-ftp/ftpd -mirrorselect -sys-apps/mdadm diff --git a/src/livecd/profiles/lw/stage1-packages b/src/livecd/profiles/lw/stage1-packages deleted file mode 100644 index 7450168270..0000000000 --- a/src/livecd/profiles/lw/stage1-packages +++ /dev/null @@ -1,38 +0,0 @@ -metalog -ncftp -dialog -lilo -grub -nvi -parted -app-arch/mt-st -sys-apps/star -dev-util/strace -sys-apps/pciutils -net-dialup/wvdial -net-www/lynx -sys-apps/raidtools -sys-apps/e2fsprogs -sys-apps/reiserfs-utils -sys-apps/hdparm -app-editors/nano -sys-apps/less -net-misc/openssh -net-misc/dhcpcd -net-fs/nfs-utils -net-irc/irssi -jfsutils -speedtouch -gpm -dosfstools -mingetty -pwgen -ucl -screen -xfsprogs -dietlibc -popt -tsocks -=sys-apps/hotplug-20020826-r2 -distcc -gcc diff --git a/src/livecd/profiles/lw/stage2-experimental b/src/livecd/profiles/lw/stage2-experimental deleted file mode 100644 index 975c665b5e..0000000000 --- a/src/livecd/profiles/lw/stage2-experimental +++ /dev/null @@ -1,2 +0,0 @@ -rp-l2tp -usbutils diff --git a/src/livecd/profiles/lw/stage2-packages b/src/livecd/profiles/lw/stage2-packages deleted file mode 100644 index f24227492b..0000000000 --- a/src/livecd/profiles/lw/stage2-packages +++ /dev/null @@ -1,13 +0,0 @@ -net-wireless/wireless-tools -sys-apps/iproute -sys-apps/pcmcia-cs -net-dialup/ppp -net-dialup/rp-pppoe -isdn4k-utils -net-misc/nforce-net -#net-misc/e100 -#net-misc/e1000 -kpnadsl4linux -pptpclient -linux-wlan-ng -sys-apps/lvm-user diff --git a/src/livecd/profiles/lw/test b/src/livecd/profiles/lw/test deleted file mode 100644 index 0aa9a9503c..0000000000 --- a/src/livecd/profiles/lw/test +++ /dev/null @@ -1,86 +0,0 @@ ---- ../lw-ut2003/pre-clean 2003-04-28 20:57:29.000000000 -0500 -+++ pre-clean 2003-04-17 14:15:34.000000000 -0500 -@@ -3,47 +3,30 @@ - #modprobe has a bug and auto-adds a "above hid keybdev mousedev" line to it's internel configuration. - #this fixes it.... - echo "above hid" > ${CD_BUILDCHROOT}/etc/modules.d/hidfix --#rm ${CD_BUILDCHROOT}/etc/init.d/iptables --install -d ${CD_BUILDCHROOT}/var/state/init.d || die -+install -d ${CD_BUILDCHROOT}/root/.irssi -+cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/config ${CD_BUILDCHROOT}/root/.irssi || die -+rm ${CD_BUILDCHROOT}/etc/init.d/iptables - cp ${CD_BUILDCHROOT}/etc/init.d/net.eth0 ${CD_BUILDCHROOT}/etc/init.d/net.eth1 --cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/bash_profile ${CD_BUILDCHROOT}/root/.bash_profile || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/modules ${CD_BUILDCHROOT}/etc/init.d || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/checkroot ${CD_BUILDCHROOT}/etc/init.d || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/md ${CD_BUILDCHROOT}/etc/init.d || die --cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/hotplug ${CD_BUILDCHROOT}/etc/init.d || die --cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/checkfs ${CD_BUILDCHROOT}/etc/init.d || die --cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/mingetty ${CD_BUILDCHROOT}/sbin || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/autoconfig ${CD_BUILDCHROOT}/etc/init.d || die --cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/usleep ${CD_BUILDCHROOT}/sbin || die --#cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/depscan.sh ${CD_BUILDCHROOT}/sbin || die --cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/login.defs ${CD_BUILDCHROOT}/etc || die --cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/functions.sh ${CD_BUILDCHROOT}/sbin || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/local ${CD_BUILDCHROOT}/etc/init.d || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fstab ${CD_BUILDCHROOT}/etc || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/net-setup ${CD_BUILDCHROOT}/usr/sbin || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/profile ${CD_BUILDCHROOT}/etc || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/net ${CD_BUILDCHROOT}/etc/conf.d || die --mv ${CD_BUILDCHROOT}/sbin/splash ${CD_BUILDCHROOT}/sbin/splash.bin || die --cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/splash ${CD_BUILDCHROOT}/sbin/ || die --cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/functions.sh ${CD_BUILDCHROOT}/sbin/ || die --cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/rc ${CD_BUILDCHROOT}/sbin/ || die --cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fbtruetype.static ${CD_BUILDCHROOT}/sbin/ || die --cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fbtruetype.static ${CD_BUILDCHROOT}/sbin/fbtruetype || die --cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fbresolution ${CD_BUILDCHROOT}/sbin || die --cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/splash.bin ${CD_BUILDCHROOT}/sbin || die -- -+rm -f ${CD_BUILDCHROOT}/lib/evms/libe2fsim.1.2.1.so - rm -f ${CD_BUILDCHROOT}/usr/share/hwdata/pci.ids - rm -f ${CD_BUILDCHROOT}/usr/share/hwdata/usb.ids - ln -s /usr/share/misc/pci.ids ${CD_BUILDCHROOT}/usr/share/hwdata/pci.ids - ln -s /usr/share/misc/usb.ids ${CD_BUILDCHROOT}/usr/share/hwdata/usb.ids --rm -f ${CD_BUILDCHROOT}/lib/evms/libe2fsim.1.2.1.so - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/install.txt ${CD_BUILDCHROOT}/ || die - echo usbcore >> ${CD_BUILDCHROOT}/etc/hotplug/blacklist - chmod +x ${CD_BUILDCHROOT}/usr/sbin/net-setup || die - mymotd=${LIVECD_ROOT}/profiles/${CD_PROFILE}/motd - [ -e $mymotd ] && cp $mymotd ${CD_BUILDCHROOT}/etc - echo "CDBOOT=1" >> ${CD_BUILDCHROOT}/etc/rc.conf || die --echo "svcdir=/var/state/init.d" >> ${CD_BUILDCHROOT}/etc/conf.d/rc || die - echo "127.0.0.1 cdimage localhost" > ${CD_BUILDCHROOT}/etc/hosts || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/inittab ${CD_BUILDCHROOT}/etc || die - mount_all -@@ -55,14 +38,20 @@ - cd /usr/src/linux - #produce correct module dependency information - make _modinst_post --rc-update del iptables default --rc-update del netmount default - rc-update add autoconfig default --#rc-update add md default -+rc-update add md default -+if [ -e /etc/init.d/metalog ] -+then -+rc-update add metalog default -+elif [ -e /etc/init.d/sysklogd ] -+then -+rc-update add sysklogd default -+fi - #remove standard keymap support: - rc-update del keymaps - rc-update del consolefont --rc-update add metalog default -+rc-update del iptables -+update-modules - EOF - chmod +x $CD_BUILDTEMP/chroot-clean - chroot $CD_BUILDCHROOT /tmp/livecd/chroot-clean -@@ -75,5 +64,6 @@ - then - source ${LIVECD_ROOT}/profiles/${CD_PROFILE}/openglify - fi -+ - find ${CD_BUILDCHROOT}/lib/modules -name modules.dep |xargs touch - diff --git a/src/livecd/profiles/lw/xfs-config b/src/livecd/profiles/lw/xfs-config deleted file mode 100644 index 7593cd06a7..0000000000 --- a/src/livecd/profiles/lw/xfs-config +++ /dev/null @@ -1,1243 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -# CONFIG_M68631 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_1GB is not set -CONFIG_2GB=y -# CONFIG_3GB is not set -# CONFIG_05GB is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -CONFIG_CARDBUS=y -CONFIG_TCIC=y -CONFIG_I82092=y -CONFIG_I82365=y - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -CONFIG_EVMS_GPT_SEGMENT_MGR=m -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -CONFIG_EVMS_OS2=m -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -# CONFIG_CRYPTO is not set -# CONFIG_CIPHERS is not set -# CONFIG_DIGESTS is not set -# CONFIG_CRYPTODEV is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -# CONFIG_NETFILTER is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_IPV6=y -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_IPSEC is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -# CONFIG_IDE_TASK_IOCTL is not set -# CONFIG_IDE_TASKFILE_IO is not set -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_CMD680 is not set -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -# CONFIG_PDC202XX_BURST is not set -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_BUILD_FIRMWARE is not set -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -CONFIG_SCSI_SYM53C8XX=m -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC395x_TRMS1040=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -CONFIG_SCSI_PCMCIA=y -CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_FDOMAIN=m -CONFIG_PCMCIA_NINJA_SCSI=m -CONFIG_PCMCIA_QLOGIC=m - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_STRIP is not set -# CONFIG_WAVELAN is not set -# CONFIG_ARLAN is not set -# CONFIG_AIRONET4500 is not set -# CONFIG_AIRONET4500_NONCS is not set -# CONFIG_AIRONET4500_PROC is not set -# CONFIG_AIRO is not set -# CONFIG_HERMES is not set -# CONFIG_PLX_HERMES is not set -# CONFIG_PCI_HERMES is not set -# CONFIG_PCMCIA_HERMES is not set -# CONFIG_AIRO_CS is not set -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -CONFIG_PCMCIA_IBMTR=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -# CONFIG_AIRONET4500_CS is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_ECC is not set -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set - -# -# PCMCIA character devices -# -CONFIG_PCMCIA_SERIAL_CS=m -CONFIG_SYNCLINK_CS=m -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_PROC_CONFIG=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_DMAPI is not set -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -# CONFIG_ZISOFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -# CONFIG_IMON is not set - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=m -CONFIG_USB_UHCI_ALT=m -CONFIG_USB_OHCI=m -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -# CONFIG_USB_USBDNET is not set -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -# CONFIG_USB_LCD is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Windows Applications support -# -# CONFIG_MKI is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/lw/xfs.settings b/src/livecd/profiles/lw/xfs.settings deleted file mode 100644 index 7e6a20944c..0000000000 --- a/src/livecd/profiles/lw/xfs.settings +++ /dev/null @@ -1,37 +0,0 @@ -source ${LIVECD_ROOT}/profiles/global/settings -CD_BUILDROOT=${CD_TEMPROOT}/${CD_PROFILE} -CD_PORTAGE_PROFILE="default-x86-1.4" -CD_USE="-wavelan pcmcia apm acpi4linux crypt ipv6 -doc -slang -X -gtk -arts -svga -directfb -ggi -esd -nas -perl -python" -CD_CFLAGS="-O2 -mcpu=i686 -pipe" -CD_CXXFLAGS="${CD_CFLAGS}" -#CD_STAGETARBALL=http://www.ibiblio.org/gentoo/releases/1.4_rc1/x86/stage3-i586-1.4_rc1.tar.bz2 -CD_STAGETARBALL=http://distro.ibiblio.org/pub/Linux/distributions/gentoo/experimental/x86/stages/stage3-x86-1.4_pre20030214.tar.bz2 -#modules to auto-detect/copy to the initrd (put in the "/modules/storage" directory) -#aic7xxx_old removed from position after aic7xxx in attempt to fix bugs #12185 and #11278 -STORAGE_MODULES="aic79xx aic7xxx aic7xxx_old BusLogic \ -ncr53c8xx NCR53c406a \ -initio advansys aha1740 aha1542 aha152x \ -atp870u dtc eata fdomain gdth \ -megaraid pas16 pci2220i pci2000 psi240i \ -qlogicfas qlogicfc qlogicisp \ -seagate t128 tmscsim u14-34f ultrastor wd7000 \ -a100u2w 3w-xxxx DAC960 NCR53c406a dc395x_trm \ -aacraid sym53c8xx a100u2w cpqfc \ -dmx3191d dpt_i2o imm in2000 ips qla1280 \ -sim710 sym53c416" -FIREWIRE_MODULES="ieee1394 ohci1394 eth1394 sbp2" -ATARAID_MODULES="ataraid pdcraid hptraid" -PCMCIA_MODULES="pcmcia_core i82365 ds ide-cs" -USB_MODULES="usbcore ehci-hcd uhci usb-ohci hid usb-storage" -LOOP_SIZE="130000" -KERNCONFIG=gss-config -CD_HOSTNAME="cdimage" -CD_PORTAGE_PROFILE="default-x86-1.4" -CD_PORTDIR="/usr/portage" -CD_ISONAME="gentoo.iso" -CD_DISTDIR="/usr/portage/distfiles" -CD_STAGELOC=/ -CD_TEMPROOT=/tmp -LOOP_MODE=cloop -ARCH=x86 -BOOTSPLASH="yes" diff --git a/src/livecd/profiles/lw/xfs2-config b/src/livecd/profiles/lw/xfs2-config deleted file mode 100644 index a19f84db56..0000000000 --- a/src/livecd/profiles/lw/xfs2-config +++ /dev/null @@ -1,1391 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODVERSIONS=y -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M686 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -# CONFIG_MK7 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -CONFIG_TOSHIBA=m -CONFIG_I8K=m -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -# CONFIG_PCMCIA is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m - -# -# Parallel IDE high-level drivers -# -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m - -# -# Parallel IDE protocol modules -# -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -# CONFIG_EVMS_GPT_SEGMENT_MGR is not set -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -CONFIG_EVMS_OS2=m -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -# CONFIG_CRYPTO is not set -# CONFIG_CIPHERS is not set -# CONFIG_DIGESTS is not set -# CONFIG_CRYPTODEV is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -# CONFIG_NETFILTER is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_IPV6=y -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m - -# -# -# -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_IPSEC is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -# CONFIG_IDE_TASK_IOCTL is not set -# CONFIG_IDE_TASKFILE_IO is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_CMD680 is not set -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -# CONFIG_PDC202XX_BURST is not set -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -CONFIG_SCSI=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_BUILD_FIRMWARE is not set -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -# CONFIG_SCSI_SYM53C8XX is not set -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m - -# -# Device Drivers -# - -# -# Texas Instruments PCILynx requires I2C bit-banging -# -CONFIG_IEEE1394_OHCI1394=m - -# -# Protocol Drivers -# -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -CONFIG_EQUALIZER=y -CONFIG_TUN=m -CONFIG_ETHERTAP=y -CONFIG_NET_SB1000=m - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -CONFIG_FDDI=y -CONFIG_DEFXX=m -CONFIG_SKFP=m -CONFIG_HIPPI=y -CONFIG_ROADRUNNER=m -# CONFIG_ROADRUNNER_LARGE_RINGS is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_STRIP is not set -# CONFIG_WAVELAN is not set -# CONFIG_ARLAN is not set -# CONFIG_AIRONET4500 is not set -# CONFIG_AIRONET4500_NONCS is not set -# CONFIG_AIRONET4500_PROC is not set -# CONFIG_AIRO is not set -# CONFIG_HERMES is not set -# CONFIG_PLX_HERMES is not set -# CONFIG_PCI_HERMES is not set -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y - -# -# IrDA options -# -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_IRDA_DEBUG=y - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -CONFIG_IRTTY_SIR=m -CONFIG_IRPORT_SIR=m - -# -# Dongle support -# -CONFIG_DONGLE=y -CONFIG_ESI_DONGLE=m -CONFIG_ACTISYS_DONGLE=m -CONFIG_TEKRAM_DONGLE=m -CONFIG_GIRBIL_DONGLE=m -CONFIG_LITELINK_DONGLE=m -CONFIG_MCP2120_DONGLE=m -CONFIG_OLD_BELKIN_DONGLE=m -CONFIG_ACT200L_DONGLE=m -CONFIG_MA600_DONGLE=m - -# -# FIR device drivers -# -CONFIG_USB_IRDA=m -CONFIG_NSC_FIR=m -CONFIG_WINBOND_FIR=m -CONFIG_TOSHIBA_FIR=m -CONFIG_SMC_IRCC_FIR=m -CONFIG_ALI_FIR=m -CONFIG_VLSI_FIR=m - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -CONFIG_ISDN_DRV_LOOP=m -CONFIG_ISDN_DIVERSION=m - -# -# low-level hardware drivers -# - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y - -# -# D-channel protocol features -# -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 - -# -# HiSax supported cards -# -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_ECC is not set -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set - -# -# Joysticks -# -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -CONFIG_VXFS_FS=m -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_PROC_CONFIG=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -CONFIG_XFS_QUOTA=y -CONFIG_XFS_DMAPI=y -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_ROOT_NFS is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -CONFIG_NCP_FS=m -CONFIG_NCPFS_PACKET_SIGNING=y -CONFIG_NCPFS_IOCTL_LOCKING=y -CONFIG_NCPFS_STRONG=y -CONFIG_NCPFS_NFS_NS=y -CONFIG_NCPFS_OS2_NS=y -CONFIG_NCPFS_SMALLDOS=y -CONFIG_NCPFS_NLS=y -CONFIG_NCPFS_EXTRAS=y -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -CONFIG_VIDEO_SELECT=y -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -CONFIG_FB=y -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FB_LOGO_TUX is not set -# CONFIG_FB_LOGO_LARRY is not set -# CONFIG_FB_LOGO_GENTOO is not set -# CONFIG_FB_LOGO_G is not set -# CONFIG_FB_LOGO_PENGUIN is not set -CONFIG_FB_LOGO_POWEREDBY=y -# CONFIG_FB_RIVA is not set -# CONFIG_FB_CLGEN is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_VESA=y -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_HGA is not set -CONFIG_VIDEO_SELECT=y -# CONFIG_FB_MATROX is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_FBCON_SPLASHSCREEN=y -CONFIG_FBCON_CFB16=y -# CONFIG_FBCON_ADVANCED is not set -CONFIG_FBCON_CFB8=y -CONFIG_FBCON_CFB16=y -CONFIG_FBCON_CFB24=y -CONFIG_FBCON_CFB32=y -# CONFIG_FBCON_FONTWIDTH8_ONLY is not set -# CONFIG_FBCON_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=m -CONFIG_USB_UHCI_ALT=m -CONFIG_USB_OHCI=m - -# -# USB Device Class drivers -# -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -CONFIG_USB_BLUETOOTH=m -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set - -# -# USB Human Interface Devices (HID) -# -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set - -# -# USB Imaging devices -# -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set - -# -# USB Multimedia devices -# - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network adaptors -# -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m - -# -# USB port drivers -# -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_TIGL=m -CONFIG_USB_BRLVGER=m -CONFIG_USB_LCD=m - -# -# Bluetooth support -# -CONFIG_BLUEZ=m -CONFIG_BLUEZ_L2CAP=m -CONFIG_BLUEZ_SCO=m -CONFIG_BLUEZ_BNEP=m -CONFIG_BNEP_MC_FILTER=y -CONFIG_BNEP_PROTO_FILTER=y - -# -# Bluetooth device drivers -# -CONFIG_BLUEZ_HCIUSB=m -# CONFIG_BLUEZ_USB_ZERO_PACKET is not set -CONFIG_BLUEZ_HCIUART=m -CONFIG_BLUEZ_HCIUART_H4=y -# CONFIG_BLUEZ_HCIDTL1 is not set -# CONFIG_BLUEZ_HCIBT3C is not set -# CONFIG_BLUEZ_HCIBLUECARD is not set -CONFIG_BLUEZ_HCIVHCI=m - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m - -# -# Grsecurity -# -# CONFIG_GRKERNSEC is not set diff --git a/src/livecd/profiles/rtcw-et/README b/src/livecd/profiles/rtcw-et/README deleted file mode 100644 index c64621732b..0000000000 --- a/src/livecd/profiles/rtcw-et/README +++ /dev/null @@ -1,31 +0,0 @@ - -***** use livecd-ng in this dir ***** - - - -script does : - -Add Hotplug to default runlevel ,change /etc/init.d/hotplug to run before local - -need to blacklist usbcore or will error on module load (built in kernel) - -add new user aliases: -alias cp='cp -i' -alias ls='ls --color' -alias mv='mv -i' -alias pico='nano -w' -alias rm='rm -i' - -change /etc/conf.d/net for dhcp (for hotplug) - -rm /lib/evms/libe2fsim.1.2.1.so (broken un-needed plugin that causes errors) until fixed by evms ppl - -cp lw/md /etc/init.d / add md to runlevel default (noraid boot option) - -rc-update add serial default - -mv modules.conf. > modules.conf so ppp works automagically - -cp install.txt to cdroot, change linuxrc to create symlink - -add hwsetup init - diff --git a/src/livecd/profiles/rtcw-et/XF86Config.ATI b/src/livecd/profiles/rtcw-et/XF86Config.ATI deleted file mode 100644 index 8654ab8758..0000000000 --- a/src/livecd/profiles/rtcw-et/XF86Config.ATI +++ /dev/null @@ -1,152 +0,0 @@ -Section "dri" - Mode 0666 -EndSection - -# ********************************************************************** -# Module section -- this section is used to specify -# which dynamically loadable modules to load. -# ********************************************************************** -# -Section "Module" - -# This loads the DBE extension module. - - Load "dbe" # Double buffer extension - -# This loads the miscellaneous extensions module, and disables -# initialisation of the XFree86-DGA extension within that module. - SubSection "extmod" - Option "omit xfree86-dga" # don't initialise the DGA extension - EndSubSection - -# This loads the Type1 and FreeType font modules - Load "type1" - Load "freetype" - -# This loads the GLX module - Load "glx" # libglx.a - Load "dri" # libdri.a - -EndSection - -# ********************************************************************** -# Files section. This allows default font and rgb paths to be set -# ********************************************************************** - -Section "Files" - -# The location of the RGB database. Note, this is the name of the -# file minus the extension (like ".txt" or ".db"). There is normally -# no need to change the default. - - RgbPath "/usr/X11R6/lib/X11/rgb" - -# Multiple FontPath entries are allowed (which are concatenated together), -# as well as specifying multiple comma-separated entries in one FontPath -# command (or a combination of both methods) -# -# If you don't have a floating point coprocessor and emacs, Mosaic or other -# programs take long to start up, try moving the Type1 and Speedo directory -# to the end of this list (or comment them out). -# - - FontPath "/usr/X11R6/lib/X11/fonts/local/" - FontPath "/usr/X11R6/lib/X11/fonts/misc/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" - FontPath "/usr/X11R6/lib/X11/fonts/Type1/" - FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" - -# The module search path. The default path is shown here. - -# ModulePath "/usr/X11R6/lib/modules" - -EndSection - - -Section "InputDevice" - - Identifier "Keyboard1" - Driver "Keyboard" - Option "AutoRepeat" "500 30" - Option "XkbRules" "xfree86" - Option "XkbModel" "pc101" - Option "XkbLayout" "us" - -EndSection - -Section "InputDevice" - - Identifier "Mouse1" - Driver "mouse" - Option "Protocol" "##MOUSEPROTO##" - Option "ZAxisMapping" "4 5" - Option "Device" "##MOUSEDEV##" - -EndSection - -Section "Monitor" - Identifier "Monitor0" - HorizSync ##HORIZSYNC## - VertRefresh ##VERTREFRESH## -EndSection - -Section "Device" - Identifier "ATI Graphics Adapter" - Driver "fglrx" - Option "no_accel" "no" - Option "no_dri" "no" - Option "DesktopSetup" "0x00000000" - Option "MonitorLayout" "AUTO, AUTO" - Option "IgnoreEDID" "off" - Option "HSync2" "unspecified" - Option "VRefresh2" "unspecified" - Option "ScreenOverlap" "0" - Option "GammaCorrectionI" "0x00000000" - Option "GammaCorrectionII" "0x00000000" -# === OpenGL specific profiles/settings === - Option "Capabilities" "0x00000800" -# === Video Overlay for the Xv extension === - Option "VideoOverlay" "on" -# === OpenGL Overlay === -# Note: When OpenGL Overlay is enabled, Video Overlay -# will be disabled automatically - Option "OpenGLOverlay" "off" -# === Misc Options === - Option "UseFastTLS" "0" - Option "BlockSignalsOnLock" "on" - Option "UseInternalAGPGART" "yes" - Option "ForceGenericCPU" "no" - Screen 0 -EndSection - -# ********************************************************************** -# Screen sections -# ********************************************************************** - -# Any number of screen sections may be present. Each describes -# the configuration of a single screen. A single specific screen section -# may be specified from the X server command line with the "-screen" -# option. -Section "Screen" - Identifier "Screen0" - Device "ATI Graphics Adapter" - Monitor "Monitor0" - DefaultDepth 24 - #Option "backingstore" - - Subsection "Display" - Depth 24 - Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" "512x384" - ViewPort 0 0 - EndSubsection -EndSection - -Section "ServerLayout" - Identifier "Server Layout" - Screen "Screen0" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection diff --git a/src/livecd/profiles/rtcw-et/XF86Config.ati b/src/livecd/profiles/rtcw-et/XF86Config.ati deleted file mode 100644 index 4f62e673e0..0000000000 --- a/src/livecd/profiles/rtcw-et/XF86Config.ati +++ /dev/null @@ -1,153 +0,0 @@ -Section "dri" - Mode 0666 -EndSection - -# ********************************************************************** -# Module section -- this section is used to specify -# which dynamically loadable modules to load. -# ********************************************************************** -# -Section "Module" - -# This loads the DBE extension module. - - Load "dbe" # Double buffer extension - -# This loads the miscellaneous extensions module, and disables -# initialisation of the XFree86-DGA extension within that module. - SubSection "extmod" - Option "omit xfree86-dga" # don't initialise the DGA extension - EndSubSection - -# This loads the Type1 and FreeType font modules - Load "type1" - Load "freetype" - -# This loads the GLX module - Load "glx" # libglx.a - Load "dri" # libdri.a - -EndSection - -# ********************************************************************** -# Files section. This allows default font and rgb paths to be set -# ********************************************************************** - -Section "Files" - -# The location of the RGB database. Note, this is the name of the -# file minus the extension (like ".txt" or ".db"). There is normally -# no need to change the default. - - RgbPath "/usr/X11R6/lib/X11/rgb" - -# Multiple FontPath entries are allowed (which are concatenated together), -# as well as specifying multiple comma-separated entries in one FontPath -# command (or a combination of both methods) -# -# If you don't have a floating point coprocessor and emacs, Mosaic or other -# programs take long to start up, try moving the Type1 and Speedo directory -# to the end of this list (or comment them out). -# - - - FontPath "/usr/X11R6/lib/X11/fonts/local/" - FontPath "/usr/X11R6/lib/X11/fonts/misc/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" - FontPath "/usr/X11R6/lib/X11/fonts/Type1/" - FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" - -# The module search path. The default path is shown here. - -# ModulePath "/usr/X11R6/lib/modules" - -EndSection - - -Section "InputDevice" - - Identifier "Keyboard1" - Driver "Keyboard" - Option "AutoRepeat" "500 30" - Option "XkbRules" "xfree86" - Option "XkbModel" "pc101" - Option "XkbLayout" "us" - -EndSection - -Section "InputDevice" - - Identifier "Mouse1" - Driver "mouse" - Option "Protocol" "##MOUSEPROTO##" - Option "ZAxisMapping" "4 5" - Option "Device" "##MOUSEDEV##" - -EndSection - -Section "Monitor" - Identifier "Monitor0" - HorizSync ##HORIZSYNC## - VertRefresh ##VERTREFRESH## -EndSection - -Section "Device" - Identifier "ATI Graphics Adapter" - Driver "fglrx" - Option "no_accel" "no" - Option "no_dri" "no" - Option "DesktopSetup" "0x00000000" - Option "MonitorLayout" "AUTO, AUTO" - Option "IgnoreEDID" "off" - Option "HSync2" "unspecified" - Option "VRefresh2" "unspecified" - Option "ScreenOverlap" "0" - Option "GammaCorrectionI" "0x00000000" - Option "GammaCorrectionII" "0x00000000" -# === OpenGL specific profiles/settings === - Option "Capabilities" "0x00000800" -# === Video Overlay for the Xv extension === - Option "VideoOverlay" "on" -# === OpenGL Overlay === -# Note: When OpenGL Overlay is enabled, Video Overlay -# will be disabled automatically - Option "OpenGLOverlay" "off" -# === Misc Options === - Option "UseFastTLS" "0" - Option "BlockSignalsOnLock" "on" - Option "UseInternalAGPGART" "yes" - Option "ForceGenericCPU" "no" - Screen 0 -EndSection - -# ********************************************************************** -# Screen sections -# ********************************************************************** - -# Any number of screen sections may be present. Each describes -# the configuration of a single screen. A single specific screen section -# may be specified from the X server command line with the "-screen" -# option. -Section "Screen" - Identifier "Screen0" - Device "ATI Graphics Adapter" - Monitor "Monitor0" - DefaultDepth 24 - #Option "backingstore" - - Subsection "Display" - Depth 24 - Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" "512x384" - ViewPort 0 0 - EndSubsection -EndSection - -Section "ServerLayout" - Identifier "Server Layout" - Screen "Screen0" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection diff --git a/src/livecd/profiles/rtcw-et/XF86Config.master b/src/livecd/profiles/rtcw-et/XF86Config.master deleted file mode 100644 index f74f851cac..0000000000 --- a/src/livecd/profiles/rtcw-et/XF86Config.master +++ /dev/null @@ -1,108 +0,0 @@ -Section "ServerLayout" - Identifier "XFree86 Configured" - Screen 0 "Screen0" 0 0 - InputDevice "Mouse0" "CorePointer" - InputDevice "Keyboard0" "CoreKeyboard" -EndSection - -Section "Files" - RgbPath "/usr/X11R6/lib/X11/rgb" - ModulePath "/usr/X11R6/lib/modules" - FontPath "/usr/X11R6/lib/X11/fonts/misc/" - FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" - FontPath "/usr/X11R6/lib/X11/fonts/Type1/" - FontPath "/usr/X11R6/lib/X11/fonts/CID/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" -EndSection - -Section "Module" - Load "dbe" -# Load "dri" - Load "extmod" - Load "glx" - Load "record" - Load "xtrap" - Load "speedo" - Load "type1" -EndSection - -Section "InputDevice" - Identifier "Keyboard0" - Driver "keyboard" -EndSection - -Section "InputDevice" - Identifier "Mouse0" - Driver "mouse" - Option "Protocol" "##MOUSEPROTO##" - Option "Device" "##MOUSEDEV##" - Option "ZAxisMapping" "4 5" -EndSection - -Section "Monitor" - Identifier "Monitor0" - VendorName "Monitor Vendor" - ModelName "Monitor Model" - HorizSync ##HORIZSYNC## - VertRefresh ##VERTREFRESH## -EndSection - -Section "Device" - ### Available Driver options are:- - ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", - ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" - ### [arg]: arg optional - #Option "DigitalVibrance" # <i> - #Option "PageFlip" # [<bool>] - #Option "Dac8Bit" # [<bool>] - #Option "NoLogo" # [<bool>] - #Option "Overlay" # [<bool>] - #Option "UBB" # [<bool>] - #Option "Stereo" # [<bool>] - #Option "BlueLine" # [<bool>] - #Option "WindowFlip" # [<bool>] - #Option "SWcursor" # [<bool>] - #Option "HWcursor" # [<bool>] - #Option "VideoKey" # <i> - #Option "NvAGP" # <i> - #Option "PixmapCacheLines" # <i> - #Option "IgnoreEDID" # [<bool>] - #Option "NoDDC" # [<bool>] - #Option "ConnectedMonitor" # <str> - #Option "ConnectedMonitors" # <str> - #Option "TVStandard" # <str> - #Option "TVOutFormat" # <str> - #Option "NoRenderAccel" # [<bool>] - Option "CursorShadow" "1" # [<bool>] - #Option "CursorShadowAlpha" # <i> - #Option "CursorShadowXOffset" # <i> - #Option "CursorShadowYOffset" # <i> - #Option "UseEdidFreqs" # [<bool>] - #Option "FlatPanelProperties" # <str> - #Option "TwinView" # [<bool>] - #Option "TwinViewOrientation" # <str> - #Option "SecondMonitorHorizSync" # <str> - #Option "SecondMonitorVertRefresh" # <str> - #Option "MetaModes" # <str> - #Option "UseInt10Module" # [<bool>] - #Option "SwapReady" # [<bool>] - #Option "NoTwinViewXineramaInfo" # [<bool>] - #Option "NoRenderExtension" # [<bool>] - Identifier "Card0" - Driver "nvidia" - VendorName "NVidia" -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Card0" - Monitor "Monitor0" - DefaultColorDepth 24 - SubSection "Display" - Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" "512x384" - Depth 24 - ViewPort 0 0 - EndSubSection -EndSection - diff --git a/src/livecd/profiles/rtcw-et/XF86Config.nvidia b/src/livecd/profiles/rtcw-et/XF86Config.nvidia deleted file mode 100644 index 44ca0c4752..0000000000 --- a/src/livecd/profiles/rtcw-et/XF86Config.nvidia +++ /dev/null @@ -1,105 +0,0 @@ -Section "ServerLayout" - Identifier "XFree86 Configured" - Screen 0 "Screen0" 0 0 - InputDevice "Mouse0" "CorePointer" - InputDevice "Keyboard0" "CoreKeyboard" -EndSection - -Section "Files" - RgbPath "/usr/X11R6/lib/X11/rgb" - ModulePath "/usr/X11R6/lib/modules" - - FontPath "/usr/X11R6/lib/X11/fonts/misc/" - FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" - FontPath "/usr/X11R6/lib/X11/fonts/Type1/" - FontPath "/usr/X11R6/lib/X11/fonts/CID/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" -EndSection - -Section "Module" - Load "dbe" -# Load "dri" - Load "extmod" - Load "glx" - Load "record" - Load "xtrap" - Load "speedo" - Load "type1" -EndSection - -Section "InputDevice" - Identifier "Keyboard0" - Driver "keyboard" -EndSection - -Section "InputDevice" - Identifier "Mouse0" - Driver "mouse" - Option "Protocol" "##MOUSEPROTO##" - Option "Device" "##MOUSEDEV##" - Option "ZAxisMapping" "4 5" -EndSection - -Section "Monitor" - Identifier "Monitor0" - VendorName "Monitor Vendor" - ModelName "Monitor Model" - HorizSync ##HORIZSYNC## - VertRefresh ##VERTREFRESH## -EndSection - -Section "Device" - ### Available Driver options are:- - ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", - ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" - ### [arg]: arg optional - #Option "DigitalVibrance" # <i> - #Option "PageFlip" # [<bool>] - #Option "Dac8Bit" # [<bool>] - #Option "NoLogo" # [<bool>] - #Option "Overlay" # [<bool>] - #Option "UBB" # [<bool>] - #Option "Stereo" # [<bool>] - #Option "BlueLine" # [<bool>] - #Option "WindowFlip" # [<bool>] - #Option "SWcursor" # [<bool>] - #Option "HWcursor" # [<bool>] - #Option "VideoKey" # <i> - #Option "NvAGP" # <i> - #Option "PixmapCacheLines" # <i> - #Option "IgnoreEDID" # [<bool>] - #Option "NoDDC" # [<bool>] - #Option "ConnectedMonitors" # <str> - #Option "TVStandard" # <str> - #Option "TVOutFormat" # <str> - #Option "NoRenderAccel" # [<bool>] - Option "CursorShadow" "1" # [<bool>] - #Option "CursorShadowAlpha" # <i> - #Option "CursorShadowXOffset" # <i> - #Option "CursorShadowYOffset" # <i> - #Option "UseEdidFreqs" # [<bool>] - #Option "FlatPanelProperties" # <str> - #Option "SecondMonitorHorizSync" # <str> - #Option "SecondMonitorVertRefresh" # <str> - #Option "UseInt10Module" # [<bool>] - #Option "SwapReady" # [<bool>] - #Option "NoTwinViewXineramaInfo" # [<bool>] - #Option "NoRenderExtension" # [<bool>] - Identifier "Card0" - Driver "nvidia" - VendorName "NVidia" -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Card0" - Monitor "Monitor0" - DefaultColorDepth 24 - SubSection "Display" - Modes "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" "512x384" - Depth 24 - ViewPort 0 0 - EndSubSection -EndSection - diff --git a/src/livecd/profiles/rtcw-et/XF86Config.xfree b/src/livecd/profiles/rtcw-et/XF86Config.xfree deleted file mode 100644 index 24109eb6b9..0000000000 --- a/src/livecd/profiles/rtcw-et/XF86Config.xfree +++ /dev/null @@ -1,125 +0,0 @@ -Section "dri" - Mode 0666 -EndSection - -# ********************************************************************** -# Module section -- this section is used to specify -# which dynamically loadable modules to load. -# ********************************************************************** -# -Section "Module" - -# This loads the DBE extension module. - - Load "dbe" # Double buffer extension - -# This loads the miscellaneous extensions module, and disables -# initialisation of the XFree86-DGA extension within that module. - SubSection "extmod" - Option "omit xfree86-dga" # don't initialise the DGA extension - EndSubSection - -# This loads the Type1 and FreeType font modules - Load "type1" - Load "freetype" - -EndSection - -# ********************************************************************** -# Files section. This allows default font and rgb paths to be set -# ********************************************************************** - -Section "Files" - -# The location of the RGB database. Note, this is the name of the -# file minus the extension (like ".txt" or ".db"). There is normally -# no need to change the default. - - RgbPath "/usr/X11R6/lib/X11/rgb" - -# Multiple FontPath entries are allowed (which are concatenated together), -# as well as specifying multiple comma-separated entries in one FontPath -# command (or a combination of both methods) -# -# If you don't have a floating point coprocessor and emacs, Mosaic or other -# programs take long to start up, try moving the Type1 and Speedo directory -# to the end of this list (or comment them out). -# - - - FontPath "/usr/X11R6/lib/X11/fonts/local/" - FontPath "/usr/X11R6/lib/X11/fonts/misc/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" - FontPath "/usr/X11R6/lib/X11/fonts/Type1/" - FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" - -# The module search path. The default path is shown here. - - ModulePath "/usr/X11R6/lib/modules" - -EndSection - - -Section "InputDevice" - - Identifier "Keyboard1" - Driver "Keyboard" - Option "AutoRepeat" "500 30" - Option "XkbRules" "xfree86" - Option "XkbModel" "pc101" - Option "XkbLayout" "us" - -EndSection - -Section "InputDevice" - - Identifier "Mouse1" - Driver "mouse" - Option "Protocol" "##MOUSEPROTO##" - Option "ZAxisMapping" "4 5" - Option "Device" "##MOUSEDEV##" - -EndSection - -Section "Monitor" - Identifier "Monitor0" - HorizSync ##HORIZSYNC## - VertRefresh ##VERTREFRESH## -EndSection - -Section "Device" - Identifier "Vesa Graphics Adapter" - Driver "vesa" - Screen 0 -EndSection - -# ********************************************************************** -# Screen sections -# ********************************************************************** - -# Any number of screen sections may be present. Each describes -# the configuration of a single screen. A single specific screen section -# may be specified from the X server command line with the "-screen" -# option. -Section "Screen" - Identifier "Screen0" - Device "Vesa Graphics Adapter" - Monitor "Monitor0" - DefaultDepth 24 - - Subsection "Display" - Depth 24 - Modes "1024x768" - ViewPort 0 0 - EndSubsection -EndSection - -Section "ServerLayout" - Identifier "Server Layout" - Screen "Screen0" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection diff --git a/src/livecd/profiles/rtcw-et/aux-files/1024.initrd b/src/livecd/profiles/rtcw-et/aux-files/1024.initrd Binary files differdeleted file mode 100644 index e81dd6a75c..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/1024.initrd +++ /dev/null diff --git a/src/livecd/profiles/rtcw-et/aux-files/autoconfig b/src/livecd/profiles/rtcw-et/aux-files/autoconfig deleted file mode 100644 index 4629fb3522..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/autoconfig +++ /dev/null @@ -1,173 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/rtcw-et/aux-files/Attic/autoconfig,v 1.1 2003/10/19 03:46:50 livewire Exp $ -echo "0" > /proc/sys/kernel/printk -DHCP="yes" -DETECT="yes" -PCMCIA="no" -HOTPLUG="yes" -APM="no" -ACPI="no" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "nodetect" ] - then - DETECT="no" - HOTPLUG="no" - APM="no" - ACPI="no" - fi -done -for x in $CMDLINE -do - if [ "$x" = "nodhcp" ] - then - DHCP="no" - fi -done -for x in $CMDLINE -do - if [ "$x" = "dopcmcia" ] - then - PCMCIA="yes" - fi -done -for x in $CMDLINE -do - if [ "$x" = "nohotplug" ] - then - HOTPLUG="no" - fi -done -for x in $CMDLINE -do - if [ "$x" = "noapm" ] - then - APM="no" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "acpi=on" ] - then - APM="no" - ACPI="yes" - fi -done - - -depend() { - after * - after urandom -} - -start() { -if [ "$DETECT" = "yes" ] - then - ebegin $WARN"Hardware detection started" - PC=`awk -F: '/^processor/{printf "Processor"$2" is"};/^model name/{printf $2};/^vendor_id/{printf vendor};/^cpu MHz/{printf " %dMHz",int($2)};/^cache size/{printf ","$2" Cache"};/^$/{print ""}' /proc/cpuinfo 2>/dev/null` - ebegin $GOOD"$PC" - eend - hwsetup -p >/dev/null - eend - else - ebegin $WARN"Hardware detection disabled via cmdline$NORMAL" -fi - -if [ "$APM" = "no" ] - then - ebegin $GOOD"Not Loading APM Bios support.${NORMAL}" - else - insmod apm power_off=1 >/dev/null 2>&1 && ebegin $GOOD"APM BIOS found, power management functions enabled.$NORMAL" - /etc/init.d/apmd start - eend -fi - - -if [ "$ACPI" = "yes" ] - then - insmod processor >/dev/null 2>&1 && ebegin $GOOD ACPI power management functions enabled.$NORMAL - insmod fan >/dev/null - insmod thermal >/dev/null - insmod button >/dev/null - insmod battery >/dev/null - insmod ac >/dev/null - /etc/init.d/acpid start - eend -fi - -if [ "$PCMCIA" = "yes" ] - then - ebegin $HILITE "PCMCIA enabled via cmdline" - /etc/init.d/pcmcia start -fi - -if [ "$DHCP" = "no" ] - then - sed 's/iface_eth0="dhcp"/#iface_eth0="dhcp"/' /etc/conf.d/net > /etc/conf.d/net1 - cp /etc/conf.d/net1 /etc/conf.d/net - rm /etc/conf.d/net1 - ebegin $BAD"Skipping DHCP broadcast detection as requested on boot commandline." -fi - - #Read in what hwsetup has found -[ -f /etc/sysconfig/knoppix ] && . /etc/sysconfig/knoppix - -# Mouse -if [ -n "$MOUSE_DEVICE" ] - then - ebegin $GOOD"Mouse is $HILITE$MOUSE_FULLNAME$GOOD at $HILITE$MOUSE_DEVICE$NORMAL" - eend -fi - -if [ "$HOTPLUG" = "yes" ] - then - /etc/init.d/hotplug start - else - ebegin $BAD"Hotplug disabled via cmdline$NORMAL" -fi - -if [ "$DETECT" = "no" ] - then - DHCP="no" - -fi - -if [ "$DETECT" = "yes" ] - then - NETDEVICES="`awk -F: '/eth.:|tr.:/{print $1}' /proc/net/dev 2>/dev/null`" -fi - -if [ -n "$NETDEVICES" ] - then - ebegin $GOOD"Network device$HILITE$NETDEVICES$GOOD detected,$WARN DHCP broadcasting for IP.$NORMAL" - eend - else - ebegin $BAD"No Network device auto detected.$NORMAL" - -fi - - -if [ -n "$SOUND_FULLNAME" -o -n "$SOUND_DRIVER" ] - then - # Setting micro input to zero to avoid subsonic disaster - ebegin $GOOD"Soundcard:" - eend - aumix -m 0 >/dev/null 2>&1 - aumix -f /etc/aumixrc -L >/dev/null 2>&1 - aumix -v100 -c100 -w100 >/dev/null 2>&1 - [ -n "$SOUND_FULLNAME" ] - ebegin " $WARN$SOUND_FULLNAME" - [ -n "$SOUND_DRIVER" ] - ebegin $WARN" driver = $SOUND_DRIVER"$HILITE -fi - -killall hwsetup 2>/dev/null -test -f /proc/splash && echo "show 65535" > /proc/splash -echo "6" > /proc/sys/kernel/printk -echo off >/proc/splash -clear -} diff --git a/src/livecd/profiles/rtcw-et/aux-files/bg.png b/src/livecd/profiles/rtcw-et/aux-files/bg.png Binary files differdeleted file mode 100644 index b695afc50b..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/bg.png +++ /dev/null diff --git a/src/livecd/profiles/rtcw-et/aux-files/bootsplash-1024x768.cfg b/src/livecd/profiles/rtcw-et/aux-files/bootsplash-1024x768.cfg deleted file mode 100644 index ca47f2ad2e..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/bootsplash-1024x768.cfg +++ /dev/null @@ -1,56 +0,0 @@ -# This is a bootsplash configuration file for -# theme SuSE, resolution 1024x768. See -# ftp://ftp.suse.com/pub/people/stepan/bootsplash for -# more information. Comments are welcome by stepan@suse.de - -# config file version -version=3 - -# should the picture be displayed? -state=1 - -# fgcolor is the text forground color. -# bgcolor is the text background (i.e. transparent) color. -fgcolor=7 -bgcolor=0 - -# (tx, ty) are the (x, y) coordinates of the text window in pixels. -# tw/th is the width/height of the text window in pixels. -tx=25 -ty=28 -tw=979 -th=649 - -# ttf message output parameters -text_x=312 -text_y=532 -text_size=18 -#text_color=0xeef4ff -text_color=-0x000000 -# name of the picture file (full path recommended) -jpeg=/etc/bootsplash/gentoo/images/bootsplash-1024x768.jpg -silentjpeg=/etc/bootsplash/gentoo/images/silent-1024x768.jpg - -progress_enable=1 - -# background -box silent noover 204 582 820 612 #04045498 -box silent inter 204 583 204 611 #ffffff #ffffff #526bb0 #526bb0 -box silent 204 583 820 611 #ffffff #ffffff #526bb0 #526bb0 -# black border -box silent 204 582 820 582 #313234 -box silent 204 612 820 612 #eef4ff -box silent 204 582 204 612 #313234 -box silent 820 582 820 612 #eef4ff - -# text box (left, top) -box 19 19 19 679 #313234 -box 19 19 1005 19 #313234 -# (right, bottom) -box 1005 19 1005 679 #eef4ff -box 19 679 1005 679 #eef4ff - -# box itself -box noover 20 20 1004 678 #04045498 - -overpaintok=1 diff --git a/src/livecd/profiles/rtcw-et/aux-files/checkfs b/src/livecd/profiles/rtcw-et/aux-files/checkfs deleted file mode 100644 index 22f4b09e64..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/checkfs +++ /dev/null @@ -1,78 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/rtcw-et/aux-files/Attic/checkfs,v 1.1 2003/10/19 03:46:50 livewire Exp $ - - -depend() { - need checkroot modules -} - -start() { - # LVM support for /usr, /home, /opt .... - # This should be done *before* checking local - # volumes, or they never get checked. - - # NOTE: Add needed modules for LVM or RAID, etc - # to /etc/modules.autoload if needed - - if [ -x /sbin/vgscan -a -d /proc/lvm ] - then - ebegin "Setting up the Logical Volume Manager" - #still echo stderr for debugging - /sbin/vgscan >/dev/null - if [ "$?" -eq 0 ] && [ -x /sbin/vgchange -a -f /etc/lvmtab ] - then - /sbin/vgchange -a y >/dev/null - fi - eend $? "Failed to setup the LVM" - fi - - # Start software raid - if [ -x /sbin/raidstart -a -f /etc/raidtab -a -f /proc/mdstat ] - then - ebegin "Starting software RAID" - ACTIVE_RAID="`grep -E "md[0-9]+[[:space:]]?: active raid" /proc/mdstat | awk -F ':' '{print $1}'`" - if [ ! -z "${ACTIVE_RAID}" ] - then - for x in $(grep -E "raiddev /dev/md[0-9]+" /etc/raidtab | \ - awk '{print $2}' | grep -v "`echo ${ACTIVE_RAID} | sed s'/[[:space:]]//g'`") - do - /sbin/raidstart /dev/${x} - done - else - /sbin/raidstart --all - fi - eend $? "Failed to start software RAID" - fi - - if [ -f /fastboot ] - then - rm -f /fastboot - else - ebegin "Checking all filesystems" - if [ -f /forcefsck ] - then - ewarn "A full fsck has been forced" - fsck -C -R -A -a -f - rm -f /forcefsck - else - fsck -R -A -a >/dev/null 2>&1 - fi - if [ "$?" -eq 0 ] - then - eend 0 - elif [ "$?" -eq 1 ] - then - ewend 1 "Filesystem errors corrected." - #everything should be ok, so return a pass - return 0 - else - eend 2 "Fsck could not correct all errors, manual repair needed" - /sbin/sulogin ${CONSOLE} - fi - fi -} - - -# vim:ts=4 diff --git a/src/livecd/profiles/rtcw-et/aux-files/checkroot b/src/livecd/profiles/rtcw-et/aux-files/checkroot deleted file mode 100644 index 9affba601a..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/checkroot +++ /dev/null @@ -1,87 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/rtcw-et/aux-files/Attic/checkroot,v 1.1 2003/10/19 03:46:50 livewire Exp $ - - -depend() { - before * -} - -start() { - if [ ! -f /fastboot ] - then - ebegin "Remounting root filesystem read-only (if necessary)" - mount / -n -o remount,ro &>/dev/null - eend $? - - ebegin "Checking root filesystem" - if [ -f /forcefsck ] - then - ewarn "A full fsck has been forced" - ewarn "Skipping fsck; this is a livecd" -# fsck -C -f -a / - # /forcefsck isn't deleted because checkfs needs it. - # it'll be deleted in that script. - fi - if [ "$?" -eq 0 ] - then - eend 0 - elif [ "$?" -eq 1 ] - then - ewend 1 "Filesystem repaired" - else - eend 2 "Filesystem couldn't be fixed :(" - /sbin/sulogin ${CONSOLE} - /sbin/reboot -f - fi - fi - - ebegin "Remounting root filesystem read/write" - mount / -n -o remount,rw &>/dev/null - if [ "$?" -ne 0 ] - then - eend 2 "Root filesystem could not be mounted R/W :(" - /sbin/sulogin ${CONSOLE} - else - eend 0 - fi - - if [ "${BOOT}" = "yes" ] - then - # create /etc/mtab (done by forcing current mounted filesystems) - # NB: this needs to be updated if our /sbin/rc mounts change ... - > /etc/mtab - mount -f -o rw / &> /dev/null - mount -f /proc &> /dev/null - - # Remove stale backups - rm -f /etc/mtab~ /etc/mtab~~ - - # should /dev be mounted ? - if ! get_bootparam "nodevfs" && [ -e /dev/.devfsd ] - then - mount -f -t devfs none /dev &> /dev/null - fi - - # should we mount a ramdisk or tmpfs? - if ! get_bootparam "notmpfs" - then - # using tmpfs - mount -f -t tmpfs tmpfs ${svcdir} \ - -o rw,mode=0644,size=${svcsize}k &> /dev/null - else - # using a ramdisk - mount -f -t ext2 /dev/ram0 ${svcdir} -o rw &> /dev/null - fi - - if ! get_bootparam "notmpfs" && get_bootparam "ngpt" - then - # POSIX shared memory support - mount -f /dev/shm &> /dev/null - fi - fi -} - - -# vim:ts=4 diff --git a/src/livecd/profiles/rtcw-et/aux-files/fbresolution b/src/livecd/profiles/rtcw-et/aux-files/fbresolution Binary files differdeleted file mode 100644 index cc077dab18..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/fbresolution +++ /dev/null diff --git a/src/livecd/profiles/rtcw-et/aux-files/fbtruetype.static b/src/livecd/profiles/rtcw-et/aux-files/fbtruetype.static Binary files differdeleted file mode 100644 index c2b9654f9e..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/fbtruetype.static +++ /dev/null diff --git a/src/livecd/profiles/rtcw-et/aux-files/fluxbox.tar.bz2 b/src/livecd/profiles/rtcw-et/aux-files/fluxbox.tar.bz2 Binary files differdeleted file mode 100644 index db03fe4a3c..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/fluxbox.tar.bz2 +++ /dev/null diff --git a/src/livecd/profiles/rtcw-et/aux-files/freeramdisk.c b/src/livecd/profiles/rtcw-et/aux-files/freeramdisk.c deleted file mode 100644 index da82fba115..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/freeramdisk.c +++ /dev/null @@ -1,32 +0,0 @@ -#include <stdio.h> -#include <string.h> -#include <sys/mount.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <fcntl.h> -#include <sys/ioctl.h> -#include <errno.h> - -main(int argc, char **argv) -{ - char rname[256]="/dev/ram"; - char b[256]; - int f; - if (argv[1]) strcpy(rname,argv[1]); - -#if 0 /* don't use on a living system, /etc/mtab is not updated */ - if (umount(rname) && (errno != ENOENT)) { - sprintf(b,"freeramdisk: cannot umount %s %d",rname,errno); - perror(b); - exit(1); - } -#endif - - if ((f=open(rname,O_RDWR)) == -1) { - sprintf(b,"freeramdisk: cannot open %s",rname); - perror(b); - exit(1); - } - ioctl(f,BLKFLSBUF); - close(f); -} diff --git a/src/livecd/profiles/rtcw-et/aux-files/fstab b/src/livecd/profiles/rtcw-et/aux-files/fstab deleted file mode 100644 index 025a3dd49d..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/fstab +++ /dev/null @@ -1,8 +0,0 @@ -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/rtcw-et/aux-files/Attic/fstab,v 1.1 2003/10/19 03:46:50 livewire Exp $ - -# /etc/fstab: static file system information. -proc /proc proc defaults 0 0 -tmpfs /dev/shm tmpfs defaults 0 0 -tmpfs /lib/dev-state tmpfs defaults 0 0 diff --git a/src/livecd/profiles/rtcw-et/aux-files/hosts b/src/livecd/profiles/rtcw-et/aux-files/hosts deleted file mode 100644 index 4da3032548..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/hosts +++ /dev/null @@ -1,11 +0,0 @@ -# -# hosts This file describes a number of hostname-to-address -# mappings for the TCP/IP subsystem. It is mostly -# used at boot time, when no name servers are running. -# On small systems, this file can be used instead of a -# "named" name server. Just add the names, addresses -# and any aliases to this file... -# - -127.0.0.1 localhost -192.168.1.2 cdimage diff --git a/src/livecd/profiles/rtcw-et/aux-files/hotplug b/src/livecd/profiles/rtcw-et/aux-files/hotplug deleted file mode 100644 index dddcfb0084..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/hotplug +++ /dev/null @@ -1,54 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2003 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# /space/gentoo/cvsroot/gentoo-x86/sys-apps/hotplug/files/hotplug.rc,v 1.2 2002/02/25 23:02:14 woodchip Exp - -HILITE="\033[1m" -NORMAL="\033[0m" - -depend() { - need modules -} - -checkconfig() { - if [ ! -d /etc/hotplug ] ; then - eerror "Hotplug requires scripts & configs in /etc/hotplug!" - return 1 - fi -} - -start() { - CMDLINE="`cat /proc/cmdline`" - for x in $CMDLINE - do - if [ "$x" = "nodetect" ] - then - ebegin "Skipping USB and PCI hotplugging (nodetect option)" - return 0 - elif [ "$x" = "nohotplug" ] - then - ebegin "Skipping USB and PCI hotplugging (nohotplug option)" - return 0 - fi - done - local error - checkconfig || return 1 - ebegin "Starting USB and PCI hotplugging" - echo "0" > /proc/sys/kernel/printk - for RC in /etc/hotplug/*.rc - do - $RC start > /dev/null 2>&1 - done - echo "6" > /proc/sys/kernel/printk - eend -} - -stop() { - local error - ebegin "Stopping USB and PCI hotplugging" - for RC in /etc/hotplug/*.rc - do - $RC stop - done - eend -} diff --git a/src/livecd/profiles/rtcw-et/aux-files/hwsetup b/src/livecd/profiles/rtcw-et/aux-files/hwsetup deleted file mode 100644 index 717a1b795f..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/hwsetup +++ /dev/null @@ -1,49 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/rtcw-et/aux-files/Attic/hwsetup,v 1.1 2003/10/19 03:46:50 livewire Exp $ - -HILITE="\033[1m" -NORMAL="\033[0m" - -DETECT="yes" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "nodetect" ] - then - DETECT="no" - fi -done - -depend() { - after checkfs - after local -} - -blurb() { - echo -ne ${HILITE}${1} - #blurblen=${#1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} -start() { - ebegin "Hardware detection" - -if [ "$DETECT" = "yes" ] - then - # Disable kernel messages to console: - echo "0" > /proc/sys/kernel/printk - /etc/init.d/autoconfig - eend - fi - -} - -stop() { - return -} - -# vim:ts=4 diff --git a/src/livecd/profiles/rtcw-et/aux-files/inittab b/src/livecd/profiles/rtcw-et/aux-files/inittab deleted file mode 100644 index b273683568..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/inittab +++ /dev/null @@ -1,47 +0,0 @@ -# -# inittab This file describes how the INIT process should set up -# the system in a certain run-level. -# -# Author: Miquel van Smoorenburg, <miquels@cistron.nl> -# Modified by: Patrick J. Volkerding, <volkerdi@ftp.cdrom.com> -# Modified by: Daniel Robbins, <drobbins@gentoo.org> -# -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/rtcw-et/aux-files/Attic/inittab,v 1.1 2003/10/19 03:46:50 livewire Exp $ - -# -# Default runlevel. - -id:3:initdefault: - -# System initialization (runs when system boots). -#DE:S12345:respawn:/sbin/devfsd /dev -fg -# Script to run when going single user (runlevel 1). -~~:S:wait:/sbin/sulogin - -si:S:sysinit:/sbin/rc sysinit -l0:0:wait:/sbin/rc shutdown -l1:1:wait:/sbin/rc single -l2:2:wait:/sbin/rc nonetwork -l3:3:wait:/sbin/rc default -l4:4:wait:/sbin/rc default -l5:5:wait:/sbin/rc default -l6:6:wait:/sbin/rc reboot -z6:6:respawn:/sbin/sulogin - -# TERMINALS -c1:12345:respawn:/sbin/mingetty --noclear --autologin root tty1 -#c2:12345:respawn:/sbin/mingetty --noclear --autologin root tty2 -#c3:12345:respawn:/sbin/mingetty --noclear --autologin root tty3 -#c4:12345:respawn:/sbin/mingetty --noclear --autologin root tty4 - -# What to do at the "Three Finger Salute". -ca:12345:ctrlaltdel:/sbin/shutdown -r now - -# Used by /etc/init.d/xdm to control DM startup. -# Read the comments in /etc/init.d/xdm for more -# info. Do NOT remove, as this will start nothing -# extra at boot if /etc/init.d/xdm is not added -# to the "default" runlevel. -x:a:once:/etc/X11/startDM.sh - -# End of /etc/inittab diff --git a/src/livecd/profiles/rtcw-et/aux-files/install.txt b/src/livecd/profiles/rtcw-et/aux-files/install.txt deleted file mode 100644 index c6df3c24af..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/install.txt +++ /dev/null @@ -1,1482 +0,0 @@ - - Gentoo Linux 1.4_rc2 and 1.4_rc3 Installation Instructions - Contents: - [1. About the Install................................................. - .................] - - 1.About the Install - - This new boot CD will boot from nearly any modern IDE CD-ROM drive, as - well as many SCSI CD-ROM, assuming that your CD-ROM and BIOS both - support booting. Included on the CD-ROM is Linux support for IDE (and - PCI IDE) (built-in to the kernel) as well as support for all SCSI - devices (available as modules.) In addition, we provide modules for - literally every kind of network card that Linux supports, as well as - tools to allow you to configure your network and establish outbound - (as well as inbound) ssh connections and download files. - - To install from the build CD, you will need to have a 486+ processor - and ideally at least 64 Megabytes of RAM. (Gentoo Linux has been - successfully built with 64MB of RAM + 64MB of swap space, but the - build process is awfully slow under those conditions.) - - Gentoo Linux can be installed using one of three "stage" tarball - files. The one you choose depends on how much of the system you want - to compile yourself. The stage1 tarball is used when one wants to - bootstrap and build the entire system from scratch. The stage2 tarball - is used for building the entire system from scratch, except for the - bootstrap part which is already performed for you. And the stage3 - tarball already contains a basic Gentoo Linux system that has been - optimized for your system. - - So, how does one begin the install process? First, you'll want to - decide which one of our LiveCD ISO images to grab from - [3]http://www.ibiblio.org/gentoo/releases/1.4_rc2/x86/. In this - directory, you'll see several subdirectories such as athlon for each - of our various architecture-specific builds. Here's a low-down on each - arch directory and what it contains: - Architecture Description - x86 Stage 1 tarballs and "gentoo-basic" liveCD -- will work on - anything. - i586 Stage 2 and 3 tarballs, GRP packages and liveCD for i586+ CPUs - i686 Stage 2 and 3 tarballs, GRP packages and liveCD for i686+ CPUs - athlon Stage 2 and 3 tarballs, GRP packages and liveCD for AMD Athlon - CPUs - athlon-xp Stage 2 and 3 tarballs, GRP packages and liveCD for AMD - Athlon XP CPUs - athlon-mp Stage 2 and 3 tarballs, GRP packages and liveCD for AMD - Athlon MP CPUs - pentium3 Stage 2 and 3 tarballs, GRP packages and liveCD for Intel - Pentium III and Pentium 4 CPUs - - Inside each of these directories, you'll find a livecd/ directory that - contains LiveCDs. While these LiveCDs will boot on any architecture, - the install-related tarballs are optimized for a particular CPU type - and will not work on all systems, except for the "gentoo-basic" LiveCD - in the x86 directory which can be used to install on anything. - - The LiveCDs are full CD images that should be burned to a CDR or CD-RW - using CD burning software. Currently, we have two types of LiveCDs. - The first carries the "gentoo-basic" label, and is approximately 40MB - in size and lives in the x86/livecd/ directory. This LiveCD is of - minimal size to allow for a initial quick download and contains a - stage1 tarball that can be found in /mnt/cdrom/gentoo/ after the CD - has booted. - - The second flavor of LiveCD we currently offer is labelled - "livecd-grp." These CDs (found in their respective arch/livecd - directories) contain stage1, 2 and 3 tarballs, and also contain a set - of GRP packages optimized for a specific architecture. GRP is simply - precompiled packages for very large applications, such as XFree86. - KDE, GNOME, OpenOffice, etc. Using these LiveCDs, it will be possible - for you to install a fully-functional Gentoo Linux system very - quickly. The downside is that these ISO images are large -- around - 600MB -- so they can take a while to download. - If for some reason your install gets interrupted at some point, you - can reboot and restart. For example, if you have partitioned, - installed the stageX tarball, and are ready to chroot, you can restart - the install if necessary. Just re-boot with the LiveCD, then mount - your drives/partitions to /mnt as normal. Basically, you can do this - at about any point during the install, just not before partitioning - for obvious reasons. - - Warning: If you encounter a problem with any part of the install and - wish to report it as a bug, report it to [4]http://bugs.gentoo.org. If - the bug needs to be moved upstream to the package maintainers (ie KDE) - the developers will take care of that. - - Now, let's quickly review the install process. First, we'll download, - burn and boot a LiveCD. After getting a root prompt, we'll create - partitions, create our filesystems, and extract either a stage1, - stage2 or stage3 tarball. If we are using a stage1 or stage2 tarball, - we will take the appropriate steps to get our systems to stage3. Once - our systems are at stage3, we can configure them (tweaking config - files, installing a bootloader, etc) and boot them and have a - fully-functional Gentoo Linux system. Depending on what stage of the - build process you're starting from, here's what's required for - installation: - stage tarball requirements for installation - 1 partition/filesystem setup, emerge sync, bootstrap, emerge system, - emerge linux sources, final configuration - 2 partition/filesystem setup, emerge sync, emerge system, emerge linux - sources, final configuration - 3 partition/filesystem setup, emerge sync, final configuration - - 2.Booting - - Start by booting the LiveCD. If detected properly, you should see a - fancy boot screen with the Gentoo Linux logo on it. At this screen, - you can hit Enter to begin the boot process, hit F2 for help, or pass - kernel boot options by typing gentoo opt1 opt2, etc. Once you hit - Enter, you'll be greeted with a lot of text output followed by the - normal Gentoo Linux boot sequence. You will be automatically logged in - as "root" and the root password will be set to a random string for - security purposes. You should have a root ("#") prompt on the current - console, and can also open new root consoles by pressing Alt-F2, - Alt-F3 and Alt-F4. Get back to the one you started on by pressing (you - guessed it) Alt-F1. - - You've probably also noticed that above your # prompt is a bunch of - help text explaining how to do things like configure your network - devices and where you can find the Gentoo Linux stage tarballs and - packages on your CD. - - 3.Load Kernel Modules - - If the PCI autodetection missed some of your hardware, you will have - to load the appropriate modules manually. To view a list of all - available network card modules, type ls - /lib/modules/*/kernel/drivers/net/*. To load a particular module, - type: - - Code listing 3.1: PCI Modules Configuration -# modprobe pcnet32 -(replace pcnet32 with your NIC module) - - Now, if you want to be able to access any SCSI hardware that wasn't - detected during the initial boot autodetection process, you'll need to - load the appropriate modules from /lib/modules, again using modprobe: - - Code listing 3.2: Loading SCSI Modules -# modprobe aic7xxx -# modprobe sd_mod - - aic7xxx supports your SCSI controller and sd_mod supports SCSI hard - disks. - - Note: Support for a SCSI CD-ROMs and disks are built-in in the kernel. - - If you are using hardware RAID, you'll need to load the ATA-RAID - modules for your RAID controller. - - Code listing 3.3: Loading RAID Modules - -# modprobe ataraid -# modprobe pdcraid - (Promise Raid Controller) -# modprobe hptraid - (Highpoint Raid Controller) - - The Gentoo LiveCD should have enabled DMA on your disks, but if it did - not, hdparm can be used to set DMA on your drives. - - Code listing 3.4: Setting DMA -Replace hdX with your disk device. -# hdparm -d 1 /dev/hdX Enables DMA -# hdparm -d1 -A1 -m16 -u1 -a64 /dev/hdX Enables DMA and other safe performance- -enhancing options -# hdparm -X66 /dev/hdX Force-enables Ultra-DMA -- dangerous -- may cause some d -rives to mess up - - 4.Loading PCMCIA Kernel Modules - - If you have a PCMCIA network card, you will need to do some additional - trickery. - - Warning: To avoid problems with cardmgr, you must run it before you - enter the chroot portion of the install. - - Code listing 4.1: Loading PCMCIA Modules -# modprobe pcmcia_core -# modprobe i82365 -# modprobe ds -# cardmgr -f - - As cardmgr detects which hardware is present, your speaker should emit - a few reassuring beeps, and your PCMCIA network card should hum to - life. You can of course insert the PCMCIA card after loading cardmgr - too, if that's preferable. (Technically, you need not run cardmgr if - you know exactly which module your PCMCIA card requires. But if you - don't, loading all PCMCIA modules and see which sticks won't work, as - all PCMCIA modules load obligingly and hang around for a PCMCIA card - to drop by. cardmgr will also unload the module(s) for any card when - you remove it). - - 5.Configuring Networking - - PPPoE configuration - - Assuming you need PPPoE to connect to the internet, the livecd (any - version) has made things easy for you by including rp-pppoe. Use the - provided adsl-setup script to configure your connection. You will be - prompted for the ethernet device that is connected to your adsl modem, - your username and password, the IPs of your DNS servers, and if you - need a basic firewall or not. - - Code listing 5.1: Configuring PPPoE -# adsl-setup -# adsl-start - - If something goes wrong, double-check that you correctly typed your - username and password by looking at /etc/ppp/pap-secrets or - /etc/ppp/chap-secrets, and make sure you are using the right ethernet - device. - - Automatic Network Configuration - - The Gentoo Linux install lets you configure a working network, - allowing you to use ssh, scp, lynx, irssi or wget as needed before - even beginning the installation process. Even if you don't need to do - these things now, you should go ahead and set up networking now. Once - networking is up, Portage will be able to use your configured network - once you are inside the chroot environment (required for installing - Gentoo Linux). The simplest way to set up networking is to run our new - net-setup script. - - Code listing 5.2: Net-Setup Script - # net-setup eth0 - - Of course, if you prefer, you may still set up networking manually. - - Manual DHCP Configuration - - Network configuration is simple with DHCP; If your ISP is not using - DHCP, skip down to the static configuration section below. - - Code listing 5.3: Network configuration with DHCP - # dhcpcd eth0 - - Note: Some ISPs require you to provide a hostname. To do that, add a - -h myhostname flag to the dhcpcd command line above. - - If you receive dhcpConfig warnings, don't panic; the errors are most - likely cosmetic. Skip down to Network testing below. - - Manual Static Configuration - - We need to setup just enough networking so that we can download - sources for the system build, as well as the required localhost - interface. Type in the following commands, replacing $IFACE with your - network interface (typically eth0), $IPNUM with your IP address, - $BCAST with your broadcast address, and $NMASK with your network mask. - For the route command, replace $GTWAY with your default gateway. - - Code listing 5.4: Static IP Network Configuration -# ifconfig $IFACE $IPNUM broadcast $BCAST netmask $NMASK -# /sbin/route add -net default gw $GTWAY netmask 0.0.0.0 metric 1 - - Now it's time to create the /etc/resolv.conf file so that name - resolution (finding Web/FTP sites by name, rather than just by IP - address) will work. - - Here's a template to follow for creating your /etc/resolv.conf file: - - Code listing 5.5: /etc/resolv.conf template -domain mydomain.com -nameserver 10.0.0.1 -nameserver 10.0.0.2 - - Replace 10.0.0.1 and 10.0.0.2 with the IP addresses of your primary - and secondary DNS servers respectively. - - Proxy Configuration - - If you are behind a proxy, it is necessary to configure your proxy - before you continue. We will export some variables to set up the proxy - accordingly. - - Code listing 5.6: Setting a Proxy -# export http_proxy="machine.company.com:1234" -# export ftp_proxy="$http_proxy" -# export RSYNC_PROXY="$http_proxy" - - Network Testing - - Now that your network has been configured, the /sbin/ifconfig -a - command should show that your network card is working (look for UP and - RUNNING in the output). - - Code listing 5.7: /sbin/ifconfig for a working network card -eth0 Link encap:Ethernet HWaddr 00:50:BA:8F:61:7A - inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0 - inet6 addr: fe80::50:ba8f:617a/10 Scope:Link - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:1498792 errors:0 dropped:0 overruns:0 frame:0 - TX packets:1284980 errors:0 dropped:0 overruns:0 carrier:0 - collisions:1984 txqueuelen:100 - RX bytes:485691215 (463.1 Mb) TX bytes:123951388 (118.2 Mb) - Interrupt:11 - - You may want to also try pinging your ISP's DNS server (found in - /etc/resolv.conf), and a website of choice, just to make sure that - your packets are reaching the net, DNS name resolution is working - correctly, etc. - - Code listing 5.8: Further Network Testing - # ping www.some_website.com - - Networking is go! - - Networking should now be configured and useable. You should be able to - use the included ssh, scp, lynx, irssi and wget commands to connect to - other machines on your LAN or the Internet. - - 6.Partition Configuration - - Now that the kernel can see the network card and disk controllers, - it's time to set up disk partitions for Gentoo Linux. - - Here's a quick overview of the standard Gentoo Linux partition layout. - We're going to create at least three partitions: a swap partition, a - root partition (to hold the bulk of Gentoo Linux), and a special boot - partition. The boot partition is designed to hold the GRUB or LILO - boot loader information as well as your Linux kernel(s). The boot - partition gives us a safe place to store everything related to booting - Linux. During normal day-to-day Gentoo Linux use, your boot partition - should remain unmounted. This prevents your kernel from being made - unavailable to GRUB (due to filesystem corruption) in the event of a - system crash, preventing the chicken-and-egg problem where GRUB can't - read your kernel (since your filesystem isn't consistent) but you - can't bring your filesystem back to a consistent state (since you - can't boot!) - - Now, on to filesystem types. Right now, you have five filesystem - options: XFS, ext2, ext3 (journaling), jfs, and ReiserFS. ext2 is the - tried and true Linux filesystem but doesn't have metadata journaling. - ext3 is the new version of ext2 with both metadata journaling and - ordered data writes, effectively providing data journaling as well. - ReiserFS is a B*-tree based filesystem that has very good small file - performance, and greatly outperforms both ext2 and ext3 when dealing - with small files (files less than 4k), often by a factor of 10x-15x. - ReiserFS also scales extremely well and has metadata journaling. As of - kernel 2.4.18+, ReiserFS is finally rock-solid and highly recommended. - XFS is a filesystem with metadata journaling that is fully supported - under Gentoo Linux's xfs-sources kernel, but is generally not - recommended due to its tendency to lose recently-modified data if your - system locks up or unexpectedly reboots (due to a power failure, for - instance.) Finially, jfs is IBM's own high performance journaling - filesystem. Since it is obscure, we cannot comment either positvely - nor negatively on its stability. - - If you're looking for the most standard filesystem, use ext2. If - you're looking for the most rugged journalled filesystem, use ext3. If - you're looking for a high-performance filesystem with journaling - support, use ReiserFS; both ext3 and ReiserFS are mature and refined. - Here are our basic recommended filesystem sizes and types: - Partition Size Type example device - boot partition, containing kernel(s) and boot information 100 - Megabytes ext2/3 highly recommended (easiest); if ReiserFS then mount - with -o notail /dev/hda1 - swap partition (no longer a 128 Megabyte limit) Generally, unless you - are running a server, swapspace can be pretty flexible. Please consult - the below table for some loose guidelines on swap space. Linux swap - /dev/hda2 - root partition, containing main filesystem (/usr, /home, etc) >=1.5 - Gigabytes ReiserFS, ext3 recommended; ext2 ok /dev/hda3 - Physical RAM Swapspace Size - 0-48MB RAM 048-064MB RAM 064MB-128MB RAM 128-256MB RAM 256-512MB RAM - 720MB 702MB 640MB 256MB - - Before creating filesystems, you may want to initialize the beginning - of your HD using dd. Doing this will ensure that your new filesystem - will not be mis-indentified by Linux's mounting code. This can be done - as follows: - - Code listing 6.1: Initializing first 1024 Sectors of HD -# dd if=/dev/zero of=/dev/hdxy bs=1K count=1 -Replace /dev/hdxy with the device you wish to "clean." - - Warning: The command above will destroy all data from /dev/hdxy. Be - careful and check twice which partition you specify for zeroing. If - you make a mistake it might result in a loss of data. - - At this point, create your partitions using fdisk. Note that your - partitions should be of type 82 if swap and 83 for regular filesystems - (whether ReiserFS, ext2/3 or other). - - Note: cfdisk is included on the install CD, and it is considerably - easier to use than fdisk. Just type cfdisk to run it; by default, - cfdisk will work with /dev/hda. If /dev/hda is not the hard disk you - want to partition, give the right value to cfdisk as a parameter. For - example: cfdisk /dev/hde - - Note: If fdisk or cfdisk instruct you to do so, please reboot to allow - your system to detect the new partition configuration. - - Note: If you are using RAID your partitions will be a little - different. You will have the partitions like this: - /dev/ataraid/discX/partY X is the arrays you have made, so if you only - have made 1 array, then it will be disc0.Y is the partition number as - in /dev/hdaY - - Once you've created your partitions, it's time to initialize the - filesystems that will be used to house our data. Initialize swap as - follows: - - Code listing 6.2: Initializing Swap - # mkswap /dev/hda2 - - You can use the mke2fs command to create ext2 filesystems. - - Code listing 6.3: Creating an ext2 Filesystem - # mke2fs /dev/hda1 - - To create an XFS filesystem, use the mkfs.xfs command. - - Code listing 6.4: Creating a XFS Filesystem - # mkfs.xfs /dev/hda3 - - Note: You may want to add a couple of additional flags to the mkfs.xfs - command: -d agcount=3 -l size=32m. The -d agcount=3 command will lower - the number of allocation groups. XFS will insist on using at least 1 - allocation group per 4 GB of your partition, so, for example, if you - hava a 20 GB partition you will need a minimum agcount of 5. The -l - size=32m command increases the journal size to 32 Mb, increasing - performance. - - Warning: If you are installing an XFS partition over a previous - ReiserFS partition, later attempts to mount may fail without an - explicit mount -t xfs. The solution is to zero out the partition - before creating the XFS filesystem: dd if=/dev/zero of=/dev/hdx bs=1k. - - If you'd like to use ext3, you can create ext3 filesystems using - mke2fs -j. - - Code listing 6.5: Creating an ext3 Filesystem - # mke2fs -j /dev/hda3 - - Note: You can find out more about using ext3 under Linux 2.4 at - [5]http://www.zip.com.au/~akpm/linux/ext3/ext3-usage.html. - - To create ReiserFS filesystems, use the mkreiserfs command. - - Code listing 6.6: Creating a ReiserFS Filesystem - # mkreiserfs /dev/hda3 - - To create JFS filesystems, use the mkfs.jfs comamnd. - - Code listing 6.7: Creating a JFS Filesystem - # mkfs.jfs /dev/hda3 - - 7.Mount Partitions - - Now, we'll activate our new swap, since we may need the additional - virtual memory that provides later: - - Code listing 7.1: Activating Swap - # swapon /dev/hda2 - - Next, we'll create the /mnt/gentoo and /mnt/gentoo/boot mountpoints, - and we'll mount our filesystems to these mountpoints. - - Code listing 7.2: Creating Mount Points -# mkdir /mnt/gentoo -# mount /dev/hda3 /mnt/gentoo -# mkdir /mnt/gentoo/boot -# mount /dev/hda1 /mnt/gentoo/boot - - If you are setting up Gentoo Linux with a separate /usr or /var, these - would get mounted to /mnt/gentoo/usr and /mnt/gentoo/var, - respectively. - - Important: If your boot partition (the one holding the kernel) is - ReiserFS, be sure to mount it with the -o notail option so GRUB gets - properly installed. Make sure that notail ends up in your new - /etc/fstab boot partition entry, too. We'll get to that in a bit. - - Important: If you are having problems mounting your boot partition - with ext2, try using mount /dev/hXX /mnt/gentoo/boot -t ext2 - - 8.Obtaining the Desired 'stage-x' Tarball - - If you are using a GRP CD to install, you already have all of the - stage tarballs available on the CD. If this is the case, copy the - tarball of your choice to /mnt/gentoo - - Alternatively, if you do not have a GRP CD, the stage1 tarball is - still available on the CD in /mnt/cdrom/gentoo. You will have to - download the other stages though, and the best place to download those - to is /mnt/gentoo. - - Code listing 8.1: Downloading Required Stages -# cd /mnt/gentoo -Use lynx to get the URL for your tarball: -# lynx http://www.ibiblio.org/pub/Linux/distributions/gentoo/releases/1.4_rc2/x -86/ -Use Up and Down arrows keys (or the TAB key) to go to the right directory -Highlight the appropriate stage you want to download -Press d which will initiate the download -Save the file and quit the browser - -OR use wget from the command line: -# wget insert URL to the required stage tarball here. - - 9.Unpacking the Stage Tarballs - - Now it's time to extract the compressed stage tarball of your choice - to /mnt/gentoo. Then, we'll chroot over to the new Gentoo Linux build - installation to "enter" the new Gentoo Linux system. - - Important: Be sure to use the p option with tar. Forgetting to do this - will cause certain files to have incorrect permissions. - - If you are using the "from scratch, build everything" install method, - you will want to use the stage1-ix86-1.4_beta.tbz2 image. If you're - using one of our bigger CDs, you'll also have a choice of a stage2 and - stage3 image. These images allow you to save time at the expense of - configurability (we've already chosen compiler optimizations and - default USE variables for you.) - - Code listing 9.1: Unpacking the Stages -# cd /mnt/gentoo -# tar -xvjpf /mnt/cdrom/gentoo/stage?-*.tbz2 -# mount -o bind /proc /mnt/gentoo/proc - - -# cp /etc/resolv.conf /mnt/gentoo/etc/resolv.conf - - If you are going to use GRP, now would be a good time to execute the - following commands: - - Code listing 9.2: Getting ready for GRP -# mkdir /mnt/gentoo/GRP -# mount -o bind /mnt/cdrom/gentoo/packages /mnt/gentoo/GRP - - Code listing 9.3: Entering the chroot Environment -# chroot /mnt/gentoo /bin/bash -# env-update -Regenerating /etc/ld.so.cache... -# source /etc/profile -The above points your shell to the new paths and updated binaries. - - After you execute these commands, you'll be "inside" your new Gentoo - Linux environment. - - 10.Getting the Current Portage Tree using Rsync - - Now, you'll need to run emerge sync. This will make sure that you have - the most current copy of the Portage tree. - - Code listing 10.1: Updating Using Rsync - -# emerge sync -# export CONFIG_PROTECT="-*" -# export USE="-* bootstrap build" -# emerge portage -# unset USE - - The Portage tree will be downloaded and stored in /usr/portage; it's - about 90Mb in size without tarballs. - - Note: The export CONFIG_PROTECT="-*" line ensures that any new scripts - installed to /etc will overwrite the old scripts (stored in - sys-apps/baselayout), bypassing Portage's new config file management - support. Type emerge --help config for more details. - - 11.Setting Gentoo optimizations (make.conf) - - Now that you have a working copy of the Portage tree, people using - stage1 to install will need to bootstrap their Gentoo Linux system as - follows. First edit the file /etc/make.conf. In this file, you should - set your USE flags, which specify optional functionality that you - would like to be built into packages; generally, the defaults (an - empty or unset USE variable) are fine. More information on USE flags - can be found [6]here. A complete list of current USE flags can be - found [7]here. - - You also should set appropriate CHOST, CFLAGS and CXXFLAGS settings - for the kind of system that you are creating (commented examples can - be found further down in the file.) Your best friend is man gcc to - figure out what additional CFLAGS and CXXFLAGS are available. Search - for 'Optimization'. - - If necessary, you can also set proxy information here if you are - behind a firewall. - - Code listing 11.1: Setting make.conf Options - # nano -w /etc/make.conf (Adjust these settings) - - Note: People who need to substantially tweak the build process should - take a look at the /etc/make.globals file. This file comprises gentoo - defaults and should never be touched. If the defaults do not suffice, - then new values should be put in /etc/make.conf, as entries in - make.conf override the entries in make.globals. If you're interested - in tweaking USE settings, look in /etc/make.profile/make.defaults. If - you want to turn off any USE settings found here, add an appropriate - USE="-foo" in /etc/make.conf (to turn off the foo USE setting.) - - 12.Starting from Stage1 - - The stage1 tarball is for ultimate tweakage. If you have picked this - tarball, you are most likely looking to have an uber-optimized system. - Have fun, because optimization is what Gentoo Linux is all about! - - Now, it's time to start the "bootstrap" process. This process takes - about two hours on my 1200Mhz AMD Athlon system. During this time, the - extracted build image will be prepped for compiling the rest of the - system. The GNU compiler suite will be built, as well as the GNU C - library. These are time consuming builds and make up the bulk of the - bootstrap process. - - Code listing 12.1: Bootstrapping -# cd /usr/portage -# scripts/bootstrap.sh - - The "bootstrap" process will now begin. - - Note: Portage by default uses /var/tmp during package building, often - using several hundred megabytes of temporary storage. If you would - like to change where Portage stores these temporary files, set a new - PORTAGE_TMPDIR before starting the bootstrap process, as follows: - - Code listing 12.2: Changing Portage's Storage Path - # export PORTAGE_TMPDIR="/otherdir/tmp" - - bootstrap.sh will build binutils, gcc, gettext, and glibc, rebuilding - binutils, gcc, and gettext after glibc. Needless to say, this process - takes a while. Have a nice nap. Once this process completes, your - system will be equivalent to a "stage2" system, which means you can - now move on to the stage2 instructions. - - 13.Starting from Stage2 - - The stage2 tarball already has the bootstrapping done for you. All - that you have to do is install the rest of the system. - - Note: If you haven't done so, please edit /etc/make.conf to your - flavor. - - Code listing 13.1: Installing the Rest of the System -# emerge -p system - [lists the packages to be installed] -# emerge system - - It's going to take a while to finish building the entire base system. - Your reward is that it will be thoroughly optimized for your system. - The drawback is that you have to find a way to keep yourself occupied - for some time to come. The author suggests "Star Wars - Super Bombad - Racing" for the PS2. - - When this process completes, your system will be the equivalent of a - stage3 system. You have a couple of choices on how to continue at this - point. You can move onto the stage3 instructions and complete those. - Doing that will get your system right up to date with what is in the - current Portage tree. This is not necessary, but it is highly - recommended. If you do not choose to get up to date with the stage3 - instructions, you can move onto the GRP install section. If you do not - wish to use GRP, you can move onto [8]Chapter 16: Final Steps. - - 14.Starting from Stage3 - - The stage3 tarball is already configured for your system. There is not - much to do for this stage, but it is a very good idea to update your - system to the newest available packages. - - Note: If you have not already edited /etc/make.conf to fit your - specifications, now would be a good time to do so. - - Code listing 14.1: Getting up-to-date - # emerge sync - # emerge -up world - lists [packages] to be installed - # emerge -u world - - Once you complete this step, you have some options on how to continue. - If you are going to be using GRP, please move onto the GRP section. If - you are not going to use GRP, you may continue onto [9]Chapter 16: - Final Steps. - - 15.Using GRP - - You can take advantage of pre-built GRP package sets to avoid - compiling certain popular and large packages. Currently, we provide - full builds of everything you need for openoffice-bin, GNOME, KDE and - xfree. - - First, you will need to cd to the location of the packages directory. - We have already mounted the directory at /GRP. In that directory you - will find the grp-install.sh script, an All directory that contains - all of the binary packages, and a list of available GRP packages. To - install any/all of these package sets you should do the following: - - Code listing 15.1: Using GRP -# cd /GRP -# sh grp-install.sh <list of package lists> -where <list of package lists> may be any of the *-list.txt files found in the s -ame directory. - - grp-install.sh can be run multiple times without replacing existing - installations. You can do a sh grp-install.sh for a basic usage - description if you are still a bit foggy. - - 16.Setting your Timezone - - At this point, you should have system that's ready for final - configuration. We'll start the configuration process by setting the - timezone. By setting the timezone before building the kernel we ensure - that users get reasonable uname -a output. - - Look for your timezone (or GMT if you using Greenwich Mean Time) in - /usr/share/zoneinfo. Then, make a symbolic link by typing: - - Code listing 16.1: Creating a symbolic link for timezome - # ln -sf /usr/share/zoneinfo/path/to/timezonefile /etc/localtime - - You might also want to check /etc/rc.conf to make sure your timezone - settings are correct. - - 17.Installing the kernel and a System Logger - - Note: If you haven't done so, please edit /etc/make.conf to your - flavor. - - You now need to merge Linux source ebuilds. Here are the ones we - currently offer: - ebuild description - gentoo-sources Our own performance and functionality-enhanced kernel - does not include XFS support. - xfs-sources Highly-compatible kernel with XFS support. - openmosix-sources A stock Linux kernel source tree patched with - support for the GPL [10]openMosix load-balancing/clustering technology - usermode-sources A stock Linux kernel source tree patched with support - for User-Mode Linux. ("Linux inside Linux" technology) - vanilla-sources A stock Linux kernel source tree, just like you'd get - from kernel.org - - Warning: If you are configuring your own kernel, be careful with the - grsecurity option. Being too aggressive with your security settings - can cause certain programs (such as X) to not run properly. If in - doubt, leave it out. - - Choose a kernel and then merge as follows: - - Code listing 17.1: Emerging Kernel Sources - # emerge sys-kernel/gentoo-sources - - Once you have a Linux kernel source tree available, it's time to - compile your own custom kernel. - - Please note that /usr/src/linux is a symlink to your current emerged - kernel source package, which is set automatically by Portage at emerge - time. If you have multiple kernel source packages, it is necessary to - set the /usr/src/linux symlink to the correct one before proceeding. - - Code listing 17.2: Compiling the Linux Kernel -# cd /usr/src/linux -# source /etc/profile -Again, this updates your paths. If you get an error saying gcc is not found, -this is what you may have to do. -# make menuconfig -# make dep && make clean bzImage modules modules_install -# mv /boot/bzImage /boot/bzImage.orig -[if bzImage already exists] -# cp /usr/src/linux/arch/i386/boot/bzImage /boot - - Warning: For your kernel to function properly, there are several - options that you will need to ensure are in the kernel proper -- that - is, they should be enabled and not compiled as modules. You will need - to enable the "Code maturity level options --> Prompt for development - and/or incomplete code/drivers" option to see several of these - selections. Under the "File systems" section, be sure to enable the - "/dev" file system support (note that you don't need to enable the - "/dev/pts file system support" option). You'll also need to enable the - "Virtual Memory Filesystem". Be sure to enable "ReiserFS" if you have - any ReiserFS partitions; the same goes for "Ext3". If you're using - XFS, enable the "SGI XFS filesystem support" option. It's always a - good idea to leave ext2 enabled whether you are using it or not. Also, - most people using IDE hard drives will want to enable the "USE DMA by - default" option; otherwise, your IDE drives may perform very poorly. - Of course, remember to enable "IDE disk" support as well -- otherwise - your kernel won't be able to see your IDE disks. - - If you are using hardware RAID you will need to enable a couple more - options in the kernel: For Highpoint RAID controllers select hpt366 - chipset support, support for IDE RAID controllers and Highpoint 370 - software RAID.For Promise RAID controllers select PROMISE - PDC202{46|62|65|67|68|69|70} support, support for IDE RAID controllers - and Support Promise software RAID (Fasttrak(tm)) - - If you use PPPoE to connect to Internet, you will need the following - options in the kernel (built-in or as preferably as modules) : "PPP - (point-to-point protocol) support", "PPP support for async serial - ports", "PPP support for sync tty ports". The two compression options - won't harm but are not definitely needed, neither does the "PPP over - Ethernet" option, that might only be used by rp-pppoe when configured - to do kernel mode PPPoE. - - If you have an IDE cd burner, then you need to enable SCSI emulation - in the kernel. Turn on "ATA/IDE/MFM/RLL support" ---> "IDE, ATA and - ATAPI Block devices" ---> "SCSI emulation support" (I usually make it - a module), then under "SCSI support" enable "SCSI support", "SCSI - CD-ROM support" and "SCSI generic support" (again, I usually compile - them as modules). If you also choose to use modules, then echo -e - "ide-scsi\nsg\nsr_mod" >> /etc/modules.autoload to have them - automatically added at boot time. - - Note: For those who prefer it, it is now possible to install Gentoo - Linux with a 2.2 kernel. However, doing this comes at a price: you - will lose many of the nifty features that are new to the 2.4 series - kernels (such as XFS and tmpfs filesystems, iptables, and more), - although the 2.2 kernel sources can be patched with ReiserFS and devfs - support. Gentoo linux boot scripts require either tmpfs or ramdisk - support in the kernel, so 2.2 kernel users need to make sure that - ramdisk support is compiled in (ie, not a module). It is vital that a - gentoo=notmpfs flag be added to the kernel line in - /boot/grub/grub.conf for the 2.2 kernel so that a ramdisk is mounted - for the bootscripts instead of tmpfs. If you choose not to use devfs, - then gentoo=notmpfs,nodevfs should be used instead. - - Your new custom kernel (and modules) are now installed. Now you need - to choose a system logger that you would like to install. We offer - sysklogd, which is the traditional set of system logging daemons. We - also have msyslog and syslog-ng as well as metalog. Power users seem - to gravitate away from sysklogd (not very good performance) and - towards the newer alternatives. If in doubt, you may want to try - metalog, since it seems to be quite popular. To merge your logger of - choice, type one of the next four lines: - - Code listing 17.3: Emerging System Logger of Choice -# emerge app-admin/sysklogd -# rc-update add sysklogd default -or -# emerge app-admin/syslog-ng -# rc-update add syslog-ng default -or -# emerge app-admin/metalog -# rc-update add metalog default -or -# emerge app-admin/msyslog -# rc-update add msyslog default - - Warning: In the case of syslog-ng you need to create - /etc/syslog-ng/syslog-ng.conf. See /etc/syslog-ng for a sample - configuration file. - - Important: Metalog flushes output to the disk in blocks, so messages - aren't immediately recorded into the system logs. If you are trying to - debug a daemon, this performance-enhancing behavior is less than - helpful. When your Gentoo Linux system is up and running, you can send - metalog a USR1 signal to temporarily turn off this message buffering - (meaning that tail -f /var/log/everything/current will now work in - real time, as expected), and a USR2 signal to turn buffering back on - again. If you want to disable buffering permanently, you can change - METALOG_OPTS="-B" to METALOG_OPTS="-B -s" in /etc/conf.d/metalog. - - Now, you may optionally choose a cron package that you'd like to use. - Right now, we offer dcron, fcron and vcron. If you don't know which - one to choose, you might as well grab vcron. They can be installed as - follows: - - Code listing 17.4: Choosing a CRON Daemon -# emerge sys-apps/dcron -# crontab /etc/crontab -or -# emerge sys-apps/fcron -# crontab /etc/crontab -or -# emerge sys-apps/vcron -You do not need to run crontab /etc/crontab if using vcron. -Don't forget to add your *cron to the proper init level. -# rc-update add *cron default - - For more information on starting programs and daemons at startup, see - the [11]rc-script guide. - - 18.Installing miscellany necessary packages - - If you need rp-pppoe to connect to the net, be aware that at this - point it has not been installed. It would be the good time to do it. - - Code listing 18.1: Installing rp-pppoe - # USE="-X" emerge rp-pppoe - - Note: The USE="-X" prevents pppoe from installing its optional X - interface, which is a good thing, because X and its dependencies would - also be emerged. You can always recompile rp-pppoe with X support - later. - - Note: Please note that the rp-pppoe is built but not configured. You - will have to do it again using adsl-setup when you boot into your - Gentoo system for the first time. - - You may need to install some additional packages in the Portage tree - if you are using any optional features like XFS, ReiserFS or LVM. If - you're using XFS, you should emerge the xfsprogs package: - - Code listing 18.2: Emerging Filesystem Tools -# emerge sys-apps/xfsprogs -If you'd like to use ReiserFS, you should emerge the ReiserFS tools: -# emerge sys-apps/reiserfsprogs -If you'd like to use JFS, you should emerge the JFS tools: -# emerge jfsutils -If you're using LVM, you should emerge the lvm-user package: -# emerge sys-apps/lvm-user - - If you're a laptop user and wish to use your PCMCIA slots on your - first real reboot, you'll want to make sure you install the pcmcia-cs - package. - - Code listing 18.3: Emerging PCMCIA-cs - # emerge sys-apps/pcmcia-cs - - Warning: You will have to re-emerge pcmcia-cs after installation to - get PCMCIA to work. - - 19.Modifying /etc/fstab for your machine - - Your Gentoo Linux system is almost ready for use. All we need to do - now is configure a few important system files and install the GRUB - boot loader. The first file we need to configure is /etc/fstab. - Remember that you should use the notail option for your boot partition - if you chose to create a ReiserFS filesystem on it. Remember to - specify ext2, ext3 or reiserfs filesystem types as appropriate. - - Use something like the /etc/fstab listed below, but of course be sure - to replace "BOOT", "ROOT" and "SWAP" with the actual block devices you - are using (such as hda1, etc.) - - Code listing 19.1: Editing fstab -# /etc/fstab: static file system information. -# -# noatime turns off atimes for increased performance (atimes normally aren't -# needed; notail increases performance of ReiserFS (at the expense of storage -# efficiency). It's safe to drop the noatime options if you want and to -# switch between notail and tail freely. - -# <fs> <mountpoint> <type> <opts> <dump/pass> - -# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts. - -/dev/BOOT /boot ext2 noauto,noatime 1 2 -/dev/ROOT / ext3 noatime 0 1 -/dev/SWAP none swap sw 0 0 -/dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,ro 0 0 -proc /proc proc defaults 0 0 - - Warning: Please notice that /boot is NOT mounted at boottime. This is - to protect the data in /boot from corruption. If you need to access - /boot, please mount it! - - 20.Setting the Root Password - - Before you forget, set the root password by typing: - - Code listing 20.1: Setting the root Password - # passwd - - You will also want to add a non-root user for everyday use. Please - consult the [12]Gentoo FAQ. - - 21.Setting your Hostname - - Edit this file so that it contains your fully-qualified domain name on - a single line, i.e. mymachine.mydomain.com. - - Code listing 21.1: Configuring Hostname - # echo mymachine.mydomain.com > /etc/hostname - - 22.Modifying /etc/hosts - - This file contains a list of ip addresses and their associated - hostnames. It's used by the system to resolve the IP addresses of any - hostnames that may not be in your nameservers. Here's a template for - this file: - - Code listing 22.1: Hosts Template -127.0.0.1 localhost -# the next line contains your IP for your local LAN, and your associated machin -e name -192.168.1.1 mymachine.mydomain.com mymachine - - Note: If you are on a DHCP network, it might be helpful to set - localhost to your machine's actual hostname. This will help GNOME and - many other programs in name resolution. - - 23.Final Network Configuration - - Add the names of any modules that are necessary for the proper - functioning of your system to /etc/modules.autoload file (you can also - add any options you need to the same line.) When Gentoo Linux boots, - these modules will be automatically loaded. Of particular importance - is your ethernet card module, if you happened to compile it as a - module: - - Code listing 23.1: /etc/modules.autoload -This is assuming that you are using a 3com card. - Check /lib/modules/`uname -r`/kernel/drivers/net for your card. - -3c59x - - Edit the /etc/conf.d/net script to get your network configured for - your first boot: - - Code listing 23.2: Boottime Network Configuration -# nano -w /etc/conf.d/net -# rc-update add net.eth0 default - - If you have multiple network cards you need to create additional - net.ethx scripts for each one (x = 1, 2, ...): - - Code listing 23.3: Multiple Network Interfaces -# cd /etc/init.d -# cp net.eth0 net.ethx -# rc-update add net.ethx default - - If you have a PCMCIA card installed, have a quick look into - /etc/init.d/pcmcia to verify that things seem all right for your - setup, then add this line to the top of /etc/init.d/net.ethx: - - Code listing 23.4: PCMCIA depend in /etc/init.d/net.ethx -depend() { - need pcmcia -} - - This makes sure that the PCMCIA drivers are autoloaded whenever your - network is loaded. - - 24.Final steps: Configure Basic Settings (including the international - keymap setting) - - Code listing 24.1: Basic Configuration - # nano -w /etc/rc.conf - - Follow the directions in the file to configure the basic settings. All - users will want to make sure that CLOCK is set to his/her liking. - International keyboard users will want to set the KEYMAP variable - (browse /usr/share/keymaps to see the various possibilities). - - 25.Configure a Bootloader - - Notes - - In the spirit of Gentoo, users now have more than one bootloader to - choose from. Using our virtual package system, users are now able to - choose between both GRUB and LILO as their bootloaders. - - Please keep in mind that having both bootloaders installed is not - necessary. In fact, it can be a hinderance, so please only choose one. - - Important: If you are installing Gentoo Linux on a system with an - NVIDIA nForce or nForce2 chipset with an integrated GeForce graphics - card, you should use LILO and avoid GRUB. With on-board video enabled, - the low memory area of your RAM is used as video RAM. Since GRUB also - uses low memory at boot time, it will experience an "out of memory" - condition. So, if you have an nForce or potentially other board with - on-board video, use LILO. Even if you're using off-board video right - now, it'd be nice to be able to remove the graphics card and use the - on-board video in a pinch, wouldn't it? :) - - Configuring GRUB - - The most critical part of understanding GRUB is getting comfortable - with how GRUB refers to hard drives and partitions. Your Linux - partition /dev/hda1 is called (hd0,0) under GRUB. Notice the - parenthesis around the hd0,0 - they are required. Hard drives count - from zero rather than "a", and partitions start at zero rather than - one. Be aware too that with the hd devices, only harddrives are - counted, not atapi-ide devices such as cdrom players, burners, and - that the same construct can be used with scsi drives. (Normally they - get higher numbers than ide drives except when the bios is configured - to boot from scsi devices.) Assuming you have a harddrive on /dev/hda, - a cdrom player on /dev/hdb, a burner on /dev/hdc and a second hardrive - on /dev/hdd, for example, and no scsi harddrive /dev/hdd7 gets - translated to (hd1,6). It might sound tricky, and tricky it is indeed, - but as we will see, grub offers a tab completion mechanism that comes - handy for those of you having a lot of harddrives and partitions and - who are a little lost in the grub numbering scheme. Having gotten the - feel for that, it's time to install GRUB. - - The easiest way to install GRUB is to simply type grub at your - chrooted shell prompt: - - Code listing 25.1: Installing GRUB -# emerge grub -# grub - - Important: If you are using hardware RAID this part will not work at - this time. Skip to the section on making your grub.conf. After that we - will complete the grub setup for RAID controllers - - You'll be presented with the grub> grub command-line prompt. Now, you - need to type in the right commands to install the GRUB boot record - onto your hard drive. In my example configuration, I want to install - the GRUB boot record on my hard drive's MBR (master boot record), so - that the first thing I see when I turn on the computer is the GRUB - prompt. In my case, the commands I want to type are: - - Code listing 25.2: GRUB on the MBR -grub> root (hd0,0) // Your boot partition -grub> setup (hd0) // Where the boot record is installed, here, it is the MBR - - Code listing 25.3: GRUB not on the MBR -Alternatively, if you wanted to install the bootloader somewhere other than the - MBR -grub> root (hd0,0) // Your boot partition -grub> setup (hd0,4) // Where the boot record is installed, here it is /dev/hda5 -grub> quit - - Here's how the two commands work. The first root ( ) command tells - GRUB the location of your boot partition (in our example, /dev/hda1 or - (hd0,0) in GRUB terminology. Then, the second setup ( ) command tells - GRUB where to install the boot record - it will be configured to look - for its special files at the root ( ) location that you specified. In - my case, I want the boot record on the MBR of the hard drive, so I - simply specify /dev/hda (also known as (hd0)). If I were using another - boot loader and wanted to set up GRUB as a secondary boot-loader, I - could install GRUB to the boot record of a particular partition. In - that case, I'd specify a particular partition rather than the entire - disk. Once the GRUB boot record has been successfully installed, you - can type quit to quit GRUB. - - Note: The tab completion mechanism of grub can be used from within - grub, assuming you wrote root ( and that you hit the TAB key, you - would be prompted with a list of the available devices (not only - harddrives), hitting the TAB key having written root (hd, grub would - print the available harddrives and hitting the TAB key after writing - root (hd0, would make grub print the list of partitions on the first - harddrive. Checking the syntax of the grub location with completion - should really help to make the right choice. - - Gentoo Linux is now installed, but we need to create the - /boot/grub/grub.conf file so that we get a nice GRUB boot menu when - the system reboots. Here's how to do it. - - Important: To ensure backwards compatibility with GRUB, make sure to - make a link from grub.conf to menu.lst. You can do this by doing ln -s - /boot/grub/grub.conf /boot/grub/menu.lst . - - Now, create the grub.conf file (nano -w /boot/grub/grub.conf), and add - the following to it: - - Code listing 25.4: Grub.conf for GRUB -default 0 -timeout 30 -splashimage=(hd0,0)/boot/grub/splash.xpm.gz - -title=My example Gentoo Linux -root (hd0,0) -kernel (hd0,0)/boot/bzImage root=/dev/hda3 - - #Below is for setup using hardware RAID -title=My Gentoo Linux on RAID -root (hd0,0) -kernel (hd0,0)/boot/bzImage root=/dev/ataraid/dXpY - -# Below needed only for people who dual-boot -title=Windows NT Workstation -root (hd0,5) -chainloader (hd0,5)+1 - - Note: (hd0,0) should be written without any spaces inside the - parentheses. - - Important: If you set up scsi emulation for an IDE cd burner earlier, - then to get it to actually work you need to add an "hdx=ide-scsi" - fragment to the kernel line in grub.conf (where "hdx" should be the - device for your cd burner). - - After saving this file, Gentoo Linux installation is complete. - Selecting the first option will tell GRUB to boot Gentoo Linux without - a fuss. The second part of the grub.conf file is optional, and shows - you how to use GRUB to boot a bootable Windows partition. - - Note: Above, (hd0,0) should point to your "boot" partition (/dev/hda1 - in our example config) and /dev/hda3 should point to your root - filesystem. (hd0,5) contains the NT boot loader. - - Note: The path to the kernel image is relative to the boot partition. - If for example you have separated boot partition (hd0,0) and root - partition (hd0,1), all paths in the grub.conf file above will become - /bzImage. - - If you need to pass any additional options to the kernel, simply add - them to the end of the kernel command. We're already passing one - option (root=/dev/hda3), but you can pass others as well. In - particular, you can turn off devfs by default (not recommended unless - you know what you're doing) by adding the gentoo=nodevfs option to the - kernel command. - - Note: Unlike in earlier versions of Gentoo Linux, you no longer have - to add devfs=mount to the end of the kernel line to enable devfs. In - rc6 devfs is enabled by default. - - Configuring LILO - - While GRUB may be the new alternative for most people, it is not - always the best choice. LILO, the LInuxLOader, is the tried and true - workhorse of Linux bootloaders. Here's how to install LILO if you - would like to use it instead of GRUB: - - The first step is to emerge LILO: - - Code listing 25.5: Emerging LILO - # emerge lilo - - Now it is time to configure LILO. I will give you a small lilo.conf to - use, and I will explain the different parts of the file. - - Code listing 25.6: Example lilo.conf -boot=/dev/hda -map=/boot/map -install=/boot/boot.b -prompt -timeout=50 -message=/boot/message -lba32 -default=linux - -image=/boot/vmlinuz-2.4.20 - label=linux - read-only - root=/dev/hda5 - -#For dual booting windows/other OS -other=/dev/hda1 - label=dos - - * boot=/dev/hda tells LILO to install itself on the first - hard disk on the first IDE controller. - * map=/boot/map states the map file. In normal use, this should not - be modified. - * install=/boot/boot.b tells LILO to install the specified file as - the new boot sector. In normal use, this should not be altered. If - the install line is missing, LILO will assume a default of - /boot/boot.b as the file to be used. - * The existence of prompt tells LILO to show you whatever is - referenced in the message line. While it is not recommended that - you remove the prompt line, if you do remove it, you can still get - a prompt by holding down the [Shift] key while your machine starts - to boot. - * timeout=50 sets the amount of time that LILO will wait for user - input before proceeding with booting the default line entry. This - is measured in tenths of a second, with 50 as the default. - * message=/boot/message refers to the screen that LILO displays to - let you select the operating system or kernel to boot. - * lba32 describes the hard disk geometry to LILO. Another common - entry here is linear. You should not change this line unless you - are very aware of what you are doing. Otherwise, you could put - your system in an unbootable state. - * default=linux refers to the default operating system for LILO to - boot from the options listed below this line. The name linux - refers to the label line below in each of the boot options. - * image=/boot/vmlinuz-2.4.20 specifies the linux kernel to boot with - this particular boot option. - * label=linux names the operating system option in the LILO screen. - In this case, it is also the name referred to by the default line. - * read-only specifies that the root partition (see the root line - below) is read-only and cannot be altered during the boot process. - * root=/dev/hda5 tells LILO what disk partition to use as the root - partition. - - Note: Thanks to [13]Redhat.com for this information. - - After you have edited your lilo.conf file, it is time to run LILO to - load the information into the MBR: - - Code listing 25.7: Running LILO - # /sbin/lilo - - LILO is configured, and now your machine is ready to boot into Gentoo - Linux! - - 26.Creating Bootdisks - - GRUB Bootdisks - - It is always a good idea to make a boot disk the first time you - install any Linux distribution. This is a security blanket, and - generally not a bad thing to do. If you are using some kinds of - hardware RAID, you may need make a GRUB boot disk. With these types of - hardware RAID, if you try to install grub from your chrooted shell it - will fail. If you are in this camp, make a GRUB boot disk, and when - you reboot the first time you can install GRUB to the MBR. Make your - bootdisk like this: - - Code listing 26.1: Creating a GRUB Bootdisk -# mke2fs /dev/fd0 -# mount /dev/fd0 /mnt/floppy -# mkdir -p /mnt/floppy/boot/grub -# cp /usr/share/grub/i386-pc/stage1 /mnt/floppy/boot/grub/ -# cp /usr/share/grub/i386-pc/stage2 /mnt/floppy/boot/grub/ -# umount /mnt/floppy -# grub - -grub> root (fd0) -grub> setup (fd0) -grub> quit - - Now reboot and load the floppy. At the floppy's grub> prompt, you can - now execute the necessary root and setup commands. - - LILO Bootdisks - - If you are using LILO, it is also a good idea to make a bootdisk: - - Code listing 26.2: Making a LILO Bootdisk -# dd if=/boot/your_kernel of=/dev/fd0 -This will only work if your kernel is smaller than 1.4MB - - 27.Installation Complete! - - Now, Gentoo Linux is installed. The only remaining step is to exit the - chrooted shell, update necessary configuration files, safely unmount - your partitions and reboot the system: - - Code listing 27.1: Rebooting the System -# etc-update -# exit -// This exits the chrooted shell; you can also type ^D -# cd / -# umount /mnt/gentoo/boot -# umount /mnt/gentoo/proc -# umount /mnt/gentoo/dev -# umount /mnt/gentoo -# reboot - - Note: After rebooting, it is a good idea to run the update-modules - command to create the /etc/modules.conf file. Instead of modifying - this file directly, you should generally make changes to the files in - /etc/modules.d. - - Important: Remember if you are running hardware RAID, you must use the - bootdisk for the first reboot. then go back and install grub the way - everyone else did the first time. You are done -- congratulations! - - If you have any questions or would like to get involved with Gentoo - Linux development, consider joining our gentoo-user and gentoo-dev - mailing lists (there's a "click to subscribe" link on our [14]main - page). We also have a handy [15]Desktop configuration guide that will - help you to continue configuring your new Gentoo Linux system, and a - useful [16]Portage user guide to help familiarize you with Portage - basics. You can find the rest of the Gentoo Documentation [17]here. If - you have any other questions involving installation or anything for - that matter, please check the Gentoo Linux [18]FAQ. Enjoy and welcome - to Gentoo Linux! - - 28.Gentoo-Stats - - The Gentoo Linux usage statistics program was started as an attempt to - give the developers a way to find out about their user base. It - collects information about Gentoo Linux usage to help us in set - priorities our development. Installing it is completely optional, and - it would be greatly appreciated if you decide to use it. Compiled - statistics can be viewed at [19]http://stats.gentoo.org/. - - The gentoo-stats server will assign a unique ID to your system. This - ID is used to make sure that each system is counted only once. The ID - will not be used to individually identify your system, nor will it be - mached against an IP address or other personal information. Every - precaution has been taken to assure your privacy in the development of - this system. The following are the things that we are monitoring right - now through our "gentoo-stats" program: - * installed packages and their version numbers - * CPU information: speed (MHz), vendor name, model name, CPU flags - (like "mmx" or "3dnow") - * memory information (total available physical RAM, total available - swap space) - * PCI cards and network controller chips - * the Gentoo Linux profile your machine is using (that is, where the - /etc/make.profile link is pointing to). - - We are aware that disclosure of sensitive information is a threat to - most Gentoo Linux users (just as it is to the developers). - * Unless you modify the gentoo-stats program, it will never transmit - sensitive information such as your passwords, configuration data, - shoe size... - * Transmission of your e-mail addresses is optional and turned off - by default. - * The IP address your data transmission originates from will never - be logged in such a way that we can identify you. There are no "IP - address/system ID" pairs. - - The installation is easy - just run the following commands: - - Code listing 28.1: Installing gentoo-stats -# emerge gentoo-stats // Installs gentoo-stats -# gentoo-stats --new // Obtains a new system ID - - The second command above will request a new system ID and enter it - into /etc/gentoo-stats/gentoo-stats.conf automatically. You can view - this file to see additional configuration options. - - After that, the program should be run on a regular schedule - (gentoo-stats does not have to be run as root). Add this line to your - crontab: - - Code listing 28.2: Updating gentoo-stats with cron - 0 0 * * 0,4 /usr/sbin/gentoo-stats --update > /dev/null - - The gentoo-stats program is a simple perl script which can be viewed - with your favortive pager or editor: /usr/sbin/gentoo-stats. - line - Updated 26 Feb 2003 - line - [20]Daniel Robbins - Chief Architect - Chris Houser - Author - [21]Jerry Alexandratos - Author - [22]Grant Goodyear - Ghost - [23]John P. Davis - Editor - [24]Pierre-Henri Jondot - Editor - [25]Eric Stockbridge - Editor - [26]Rajiv Manglani - Editor - [27]Jungmin Seo - Editor - [28]Stoyan Zhekov - Editor - line - Summary: These instructions step you through the process of installing - Gentoo Linux 1.4_rc2 and 1.4_rc3. The Gentoo Linux installation - process supports various installation approaches, depending upon how - much of the system you want to custom-build from scratch. - line - - Donate to support our development efforts. - Make payments with PayPal - it's fast, free and secure! - line - [29]Win4Lin at NeTraverse - - Win4Lin from NeTraverse lets you run Windows applications under Gentoo - Linux at native speeds. [30]Purchase Win4Lin "Gentoo Edition" and - you'll also get a special Gentoo discount. Every sale also helps - support Gentoo Linux development :) - line - [31]DDR Memory at Crucial.com - - Purchase RAM from Crucial.com and a percentage of your sale will go - towards further Gentoo Linux development. - line - Copyright 2001-2003 Gentoo Technologies, Inc. Questions, Comments, - Corrections? Email [32]www@gentoo.org. - -References - - 1. http://www.gentoo.org/ - 2. http://www.gentoo.org/ - 3. http://www.ibiblio.org/gentoo/releases/1.4_rc2/x86/ - 4. http://bugs.gentoo.org/ - 5. http://www.zip.com.au/~akpm/linux/ext3/ext3-usage.html - 6. http://www.gentoo.org/doc/en/use-howto.xml - 7. http://www.gentoo.org/dyn/use-index.xml - 8. http://www.gentoo.org/doc/en/gentoo-x86-install.xml#doc_chp16 - 9. http://www.gentoo.org/doc/en/gentoo-x86-install.xml#doc_chp16 - 10. http://www.openmosix.com/ - 11. http://www.gentoo.org/doc/en/rc-scripts.xml - 12. http://www.gentoo.org/doc/en/faq.xml - 13. http://www.redhat.com/ - 14. http://www.gentoo.org/ - 15. http://www.gentoo.org/doc/en/desktop.xml - 16. http://www.gentoo.org/doc/en/portage-user.xml - 17. http://www.gentoo.org/main/en/docs.xml - 18. http://www.gentoo.org/doc/en/faq.xml - 19. http://stats.gentoo.org/ - 20. mailto:drobbins@gentoo.org - 21. mailto:jerry@gentoo.org - 22. mailto:g2boojum@gentoo.org - 23. mailto:zhen@gentoo.org - 24. mailto:Pierre-Henri.Jondot@wanadoo.fr - 25. mailto:stocke2@gentoo.org - 26. mailto:rajiv@gentoo.org - 27. mailto:seo@gentoo.org - 28. mailto:zhware@gentoo.org - 29. http://www.netraverse.com/gentoo.htm - 30. http://www.netraverse.com/gentoo.htm - 31. http://www.qksrv.net/click-477620-5032687 - 32. mailto:www@gentoo.org diff --git a/src/livecd/profiles/rtcw-et/aux-files/local b/src/livecd/profiles/rtcw-et/aux-files/local deleted file mode 100644 index ba947df707..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/local +++ /dev/null @@ -1,87 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/rtcw-et/aux-files/Attic/local,v 1.1 2003/10/19 03:46:50 livewire Exp $ - -HILITE="\033[1m" -NORMAL="\033[0m" - -NET="no" -GAME="yes" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "forceloadnet" ] - then - NET="yes" - elif [ "$x" = "nogame" ] - then - GAME="no" - fi -done - -depend() { - before autoconfig -} - -blurb() { - echo -ne ${HILITE}${1} - #blurblen=${#1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} - -start() { - umount /initrd - /sbin/freeramdisk /dev/ram0 - #make our mtab look sane... - local mycdloc - mycdloc=`cat /tmp/mycd` - mycdloc=${mycdloc#/newroot*} - mount -f $mycdloc /mnt/cdrom -t iso9660 -o ro - if [ -e /mnt/livecd.cloop ] - then - mount -f /mnt/livecd.cloop /mnt/cloop -t ext2 -o ro - #cloop was cached to tmpfs so that CD could be unmounted. - else - mount -f /mnt/cdrom/livecd.cloop /mnt/cloop -t ext2 -o ro - fi - rm /tmp/mycd - mount -f tmpfs / -t tmpfs -o rw - - echo "10000" > /proc/sys/fs/file-max - echo root:`pwgen -s 16` | chpasswd > /dev/null 2>&1 - if [ "$NET" = "yes" ] - then - ebegin "Auto-detecting network modules" - # Disable kernel messages to console: - echo "0" > /proc/sys/kernel/printk - local x - for x in /lib/modules/*/kernel/drivers/net/* - do - y=${x##*/} - y=${y%%.*} - echo -ne " ${GOOD}*${NORMAL} Scanning for ${y}..." - insmod -f ${x} > /dev/null 2>&1 - backup - done - echo "6" > /proc/sys/kernel/printk - fi - #if [ ! -e /mnt/livecd.* ] - #then - # #Turn off CD-ROM spindown (well... 5.5hrs) if cdcache wasn't enabled... - # hdparm -S 251 /dev/cdroms/cdrom* > /dev/null 2>&1 - #fi - if [ "$GAME" = "yes" ] - then - touch /etc/startgame - fi -} - -stop() { - return -} - -# vim:ts=4 diff --git a/src/livecd/profiles/rtcw-et/aux-files/localstart.gl b/src/livecd/profiles/rtcw-et/aux-files/localstart.gl deleted file mode 100644 index 56ef5081a2..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/localstart.gl +++ /dev/null @@ -1,8 +0,0 @@ -# /etc/conf.d/local.start: -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/rtcw-et/aux-files/Attic/localstart.gl,v 1.1 2003/10/19 03:46:50 livewire Exp $ - -# This is a good place to load any misc. -# programs on startup ( 1>&2 ) - -modprobe nvidia && opengl-update nvidia && cp /etc/X11/xfree-nvidia /etc/X11/XF86Config -modprobe fglrx && opengl-update ati && cp /etc/X11/xfree-ati /etc/X11/XF86Config diff --git a/src/livecd/profiles/rtcw-et/aux-files/login.defs b/src/livecd/profiles/rtcw-et/aux-files/login.defs deleted file mode 100644 index 8225588ab9..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/login.defs +++ /dev/null @@ -1,133 +0,0 @@ -# -# /etc/login.defs - Configuration control definitions for the login package. -# -# All items are optional - if not specified then the described action or -# option will be inhibited. -# -# Comment lines (lines beginning with "#") and blank lines are ignored. -# - -# -# Delay in seconds before being allowed another attempt after a login failure -# -FAIL_DELAY 3 - -# -# Enable logging and display of /var/log/faillog login failure info. -# -FAILLOG_ENAB yes - -# -# Enable display of unknown usernames when login failures are recorded. -# -LOG_UNKFAIL_ENAB no - -# -# Enable logging and display of /var/log/lastlog login time info. -# -LASTLOG_ENAB no - -# -# If defined, ":" delimited list of "message of the day" files to -# be displayed upon login. -# -MOTD_FILE /etc/motd -#MOTD_FILE /etc/motd:/usr/lib/news/news-motd - -# -# If defined, file which maps tty line to TERM environment parameter. -# Each line of the file is in a format something like "vt100 tty01". -# -TTYTYPE_FILE /etc/ttytype - -# -# If defined, login failures will be logged here in a utmp format. -# last, when invoked as lastb, will read /var/log/btmp, so... -# -FTMP_FILE /var/log/btmp - -# -# If defined, file which inhibits all the usual chatter during the login -# sequence. If a full pathname, then hushed mode will be enabled if the -# user's name or shell are found in the file. If not a full pathname, then -# hushed mode will be enabled if the file exists in the user's home directory. -# -HUSHLOGIN_FILE .hushlogin -#HUSHLOGIN_FILE /etc/hushlogins - -# -# The default PATH settings. -# -ENV_PATH /usr/local/bin:/usr/bin:/bin - -# -# The default PATH settings for root: -# -ENV_ROOTPATH /sbin:/bin:/usr/sbin:/usr/bin - -# -# The default PATH settings when su'ing to root: -# -ENV_SUPATH /sbin:/bin:/usr/sbin:/usr/bin - -# -# Terminal permissions -# -# TTYGROUP Login tty will be assigned this group ownership. -# TTYPERM Login tty will be set to this permission. -# -# If you have a "write" program which is "setgid" to a special group -# which owns the terminals, define TTYGROUP to the group number and -# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign -# TTYPERM to either 622 or 600. -# -TTYGROUP tty -TTYPERM 0600 - -# -# Password aging controls: -# -# PASS_MAX_DAYS Maximum number of days a password may be used. -# PASS_MIN_DAYS Minimum number of days allowed between password changes. -# PASS_MIN_LEN Minimum acceptable password length. -# PASS_WARN_AGE Number of days warning given before a password expires. -# -PASS_MAX_DAYS 99999 -PASS_MIN_DAYS 0 -PASS_MIN_LEN 5 -PASS_WARN_AGE 7 - -# -# Min/max values for automatic uid selection in useradd -# -UID_MIN 1000 -UID_MAX 60000 - -# -# Min/max values for automatic gid selection in groupadd -# -GID_MIN 100 -GID_MAX 60000 - -# -# Max number of login retries if password is bad -# -LOGIN_RETRIES 3 - -# -# Max time in seconds for login -# -LOGIN_TIMEOUT 60 - -# -# Require password before chfn/chsh can make any changes. -# -CHFN_AUTH yes - -# -# Which fields may be changed by regular users using chfn - use -# any combination of letters "frwh" (full name, room number, work -# phone, home phone). If not defined, no changes are allowed. -# For backward compatibility, "yes" = "rwh" and "no" = "frwh". -# -CHFN_RESTRICT rwh diff --git a/src/livecd/profiles/rtcw-et/aux-files/md b/src/livecd/profiles/rtcw-et/aux-files/md deleted file mode 100644 index 9bf7c18c1b..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/md +++ /dev/null @@ -1,57 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/rtcw-et/aux-files/Attic/md,v 1.1 2003/10/19 03:46:50 livewire Exp $ - -HILITE="\033[1m" -NORMAL="\033[0m" - -RAID="no" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "noraid" ] - then - RAID="no" - fi -done - -depend() { - after checkfs - after * -} - -blurb() { - echo -ne ${HILITE}${1} - #blurblen=${#1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} -start() { - ebegin "Raid Setup" - -if [ "$RAID" = "yes" ] - then - ebegin "Auto-detecting EVMS modules" - # Disable kernel messages to console: - echo "0" > /proc/sys/kernel/printk - local x - for x in /lib/modules/*/kernel/drivers/evms/* - do - y=${x##*/} - y=${y%%.*} - echo -ne " ${GOOD}*${NORMAL} Scanning for ${y}..." - insmod -f ${x} > /dev/null 2>&1 - backup - done - fi - -} - -stop() { - return -} - -# vim:ts=4 diff --git a/src/livecd/profiles/rtcw-et/aux-files/memtest b/src/livecd/profiles/rtcw-et/aux-files/memtest Binary files differdeleted file mode 100644 index c8cfeb44a4..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/memtest +++ /dev/null diff --git a/src/livecd/profiles/rtcw-et/aux-files/menu.blackbox b/src/livecd/profiles/rtcw-et/aux-files/menu.blackbox deleted file mode 100644 index b74334272e..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/menu.blackbox +++ /dev/null @@ -1,31 +0,0 @@ -[begin] (Gentoo) - [exec] (RTCW: Enemy Territory) {/usr/bin/et} - [exec] (Gamelaunch) {gamelaunch} - [exec] (Volume) {aumix} - - -[submenu] (Setup Network) - [exec] (net-setup eth0) {xterm -e "net-setup eth0"} - [exec] (net-setup eth1) {xterm -e "net-setup eth1"} - -[end] - -[submenu] (Terminals) - [exec] (xterm) {xterm -fg white -bg black} -[end] - -[submenu] (Settings) - [workspaces] (Workspace List) -[submenu] (Styles) {Choose a style...} - [stylesdir] (/usr/share/commonbox/styles) -[end] - - [include] (/usr/share/commonbox/imagebgmenu) - [include] (/usr/share/commonbox/solidbgmenu) - [config] (Configure) - [reconfig] (Reload config) -[end] - - [restart] (Restart) -[end] - diff --git a/src/livecd/profiles/rtcw-et/aux-files/mingetty b/src/livecd/profiles/rtcw-et/aux-files/mingetty Binary files differdeleted file mode 100644 index aaa47dc976..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/mingetty +++ /dev/null diff --git a/src/livecd/profiles/rtcw-et/aux-files/modules b/src/livecd/profiles/rtcw-et/aux-files/modules deleted file mode 100644 index 49568146a8..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/modules +++ /dev/null @@ -1,26 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/rtcw-et/aux-files/Attic/modules,v 1.1 2003/10/19 03:46:50 livewire Exp $ - - -depend() { - need bootmisc localmount -} - -start() { - # Loop over every line in /etc/modules.autoload. - (cat /etc/modules.autoload; echo) | # make sure there is a LF at the end - while read module args - do - case "${module}" in - \#*|"") continue ;; - esac - ebegin " Loading module ${module}" - modprobe ${module} ${args} &>/dev/null - eend $? " Failed to load ${module}" -done -} - - -# vim:ts=4 diff --git a/src/livecd/profiles/rtcw-et/aux-files/net b/src/livecd/profiles/rtcw-et/aux-files/net deleted file mode 100644 index 40e01d453f..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/net +++ /dev/null @@ -1,35 +0,0 @@ -# /etc/conf.d/net: -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/rtcw-et/aux-files/Attic/net,v 1.1 2003/10/19 03:46:50 livewire Exp $ - -# Global config file for net.* rc-scripts - -# This is basically the ifconfig argument without the ifconfig $iface -# -#iface_eth0="192.168.0.2 broadcast 192.168.0.255 netmask 255.255.255.0" -#iface_eth1="207.170.82.202 broadcast 207.0.255.255 netmask 255.255.0.0" - -# For DHCP set iface_eth? to "dhcp" -# For passing options to dhcpcd use dhcpcd_eth? -# -iface_eth0="dhcp" -iface_eth1="dhcp" -#dhcpcd_eth0="..." - -# For adding aliases to a interface -# -#alias_eth0="192.168.0.3 192.168.0.4" - -# NB: The next is only used for aliases. -# -# To add a custom netmask/broadcast address to created aliases, -# uncomment and change accordingly. Leave commented to assign -# defaults for that interface. -# -#broadcast_eth0="192.168.0.255 192.168.0.255" -#netmask_eth0="255.255.255.0 255.255.255.0" - - -# For setting the default gateway -# -#gateway="eth0/192.168.0.1" - diff --git a/src/livecd/profiles/rtcw-et/aux-files/profile b/src/livecd/profiles/rtcw-et/aux-files/profile deleted file mode 100644 index 73e33ef171..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/profile +++ /dev/null @@ -1,34 +0,0 @@ -# /etc/profile: -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/rtcw-et/aux-files/Attic/profile,v 1.1 2003/10/19 03:46:50 livewire Exp $ - -if [ -e "/etc/profile.env" ] -then - source /etc/profile.env -fi - -#077 would be more secure, but 022 is generally quite realistic -umask 022 -alias cp='cp -i' -alias ls='ls --color' -alias mv='mv -i' -alias pico='nano -w' -alias rm='rm -i' -if [ `/usr/bin/whoami` = 'root' ] -then - if [ "$SHELL" = '/bin/bash' ] || [ "$SHELL" = '/bin/sh' ] - then - export PS1='\[\033[01;31m\]\h \[\033[01;34m\]\W \$ \[\033[00m\]' - fi - export PATH="/bin:/sbin:/usr/bin:/usr/sbin:${ROOTPATH}" -else - if [ "$SHELL" = '/bin/bash' ] || [ "$SHELL" = '/bin/sh' ] - then - export PS1='\[\033[01;32m\]\u@\h \[\033[01;34m\]\W \$ \[\033[00m\]' - fi - export PATH="/bin:/usr/bin:${PATH}" -fi -unset ROOTPATH - -if [ -z "$INPUTRC" -a ! -f "$HOME/.inputrc" ]; then - export INPUTRC="/etc/inputrc" -fi diff --git a/src/livecd/profiles/rtcw-et/aux-files/rc b/src/livecd/profiles/rtcw-et/aux-files/rc deleted file mode 100644 index 59677587cd..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/rc +++ /dev/null @@ -1,521 +0,0 @@ -#!/bin/bash -# Copyright 1999-2003 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/rtcw-et/aux-files/Attic/rc,v 1.1 2003/10/19 03:46:50 livewire Exp $ - - -trap ":" INT QUIT TSTP -source /sbin/functions.sh -umask 022 - -try() { - local retval=0 - # This works fine in test, but real life booting, fails for mounting /proc - # if we only check $? for instance ... We thus need to [ -n "${errstr}" ] - # as well. - local errstr - errstr="`(eval $*) 2>&1 >/dev/null`" - retval=$? - if [ "${retval}" -ne 0 ] || \ - ([ -n "`echo "$*" | gawk '/mount/ { print "yes" }'`" -a -n "${errstr}" ]) - then - echo -e "${ENDCOL}${NORMAL}[${BAD} oops ${NORMAL}]" - echo - eerror "The \"${1}\" command failed with error:" - echo - echo "${errstr#*: }" - echo - eerror "Since this is a critical task, startup cannot continue." - echo - /sbin/sulogin ${CONSOLE} - einfo "Unmounting filesystems" - /bin/mount -a -o remount,ro & >/dev/null - einfo "Rebooting" - /sbin/reboot -f - fi - return ${retval} -} - -# Check that $svcdir exists ... -check_statedir() { - if [ ! -d "${svcdir}" ] - then - if ! mkdir -p "${svcdir}" &> /dev/null - then - echo - eerror "For Gentoo Linux to function properly, \"${svcdir}\" need to exist." - eerror "Please mount your root partition read/write, and execute:" - echo - eerror " # mkdir -p ${svcdir}" - echo; echo - /sbin/sulogin ${CONSOLE} - einfo "Unmounting filesystems" - /bin/mount -a -o remount,ro & >/dev/null - einfo "Rebooting" - /sbin/reboot -f - fi - fi -} - -# Save $1 -argv1="$1" -# First time boot stuff goes here. Note that 'sysinit' is an internal runlevel -# used to bring up local filesystems, and should not be started with /sbin/rc -# directly ... -if [ "${RUNLEVEL}" = "S" -a "${argv1}" = "sysinit" ] -then - # Setup initial $PATH just in case - PATH="/bin:/sbin:/usr/bin:/usr/sbin:${PATH}" - - echo - echo -e "${GOOD}Gentoo Linux${GENTOO_VERS}; \e[34;01mhttp://www.gentoo.org/${NORMAL}" - echo -e " Copyright 2001-2003 Gentoo Technologies, Inc.; Distributed under the GPL" - echo - - ebegin "Mounting /proc"; \ - try mount -n /proc; \ - eend $? - - # Figure out the number scripts we are going to start for the progress meter :) - if [ -f /proc/splash ]; then - tscripts=`ls -1R /etc/runlevels/ | grep -c $` - nscripts=`ls -1R /etc/runlevels/ | grep -c '^\B'` - export sscripts=$((${tscripts} - ${nscripts})) - fi - - rc_splash "begin" 2> /dev/null - - if [ "$(get_KV)" -ge "$(KV_to_int '2.5.0')" -a -d /sys ] - then - ebegin "Mounting /sys" - mount -t sysfs none /sys - eend $? - fi - - # Check if the user disabled devfs - devfs="yes" - get_bootparam "nodevfs" - if [ "$?" -eq 0 ] - then - devfs="no" - fi - - # Fix weird bug where there is a /dev/.devfsd in a unmounted /dev - mymounts="`awk '($3 == "devfs") { print "yes"; exit 0 }' /proc/mounts`" - if [ -e "/dev/.devfsd" -a "${mymounts}" != "yes" ] - then - rm -f /dev/.devfsd - fi - - # With the new way, /dev can be mounted by the kernel ... - if [ "${devfs}" = "yes" -a ! -e "/dev/.devfsd" ] - then - mymounts="`awk '($2 == "devfs") { print "yes"; exit 0 }' /proc/filesystems`" - # Is devfs support compiled in? - if [ "${mymounts}" = "yes" ] - then - ebegin "Mounting devfs at /dev"; \ - try mount -n -t devfs none /dev; \ - eend $? - rc_splash "start" - else - clear - echo - einfo "The Gentoo Linux system initialization scripts have detected that your" - einfo "kernel has been compiled without DEVFS support. Because Gentoo Linux" - einfo "has been designed to work with DEVFS, it is required that you compile" - einfo "support for it into your kernel. Please read the 'Gentoo Linux from" - einfo "source (build) CD Installation Guide' at:" - echo - einfo " http://www.gentoo.org/doc/build.html" - echo - einfo "for more information on how to do this." - echo - read -t 15 -p "(hit Enter to continue or wait 15 seconds...)" - fi - fi - - # Need devfsd running now so that /dev/ram0 exists if we need it - mymounts="`awk '($3 == "devfs") { print "yes"; exit 0 }' /proc/mounts`" - if [ "${devfs}" = "yes" -a -e "/dev/.devfsd" -a \ - "${mymounts}" = "yes" ] - then - ebegin "Starting devfsd" - /sbin/devfsd /dev > /dev/null - eend $? - rc_splash "start" - fi - - # Mount either a ramdisk or tmpfs if requested. - # we do this to temp mount, until we can get /var mounted ... - tsvcdir="/mnt/.init.d" - - # Should we use tmpfs or a ramdisk for caching dependency and - # general initscript data? Note that the 'gentoo=tmpfs' kernel - # option should override most settings ... - if get_bootparam "tmpfs" || \ - [ "${svcmount}" = "yes" -a "${svcfstype}" = "tmpfs" ] - then - mkdir -p "${tsvcdir}" - - ebegin "Mounting tmpfs at ${tsvcdir}" - try mount -n -t tmpfs tmpfs "${tsvcdir}" \ - -o rw,mode=0644,size="${svcsize}"k - eend 0 - rc_splash "start" - - elif get_bootparam "ramfs" || \ - [ "${svcmount}" = "yes" -a "${svcfstype}" = "ramfs" ] - then - mkdir -p "${tsvcdir}" - - ebegin "Mounting ramdisk 0 at ${tsvcdir}" - try dd if=/dev/zero of=/dev/ram0 bs=1k count="${svcsize}" - try /sbin/mke2fs -i 1024 -vm0 /dev/ram0 "${svcsize}" - try mount -n -t ext2 /dev/ram0 "${tsvcdir}" -o rw - eend 0 - rc_splash "start" - fi - - if get_bootparam "adelie" - then - einfo "Server/Node low-level initialisation..." - - # Saving the kernel attributed hostname to a file for future - # initialisation selection: see /etc/init.d/switch. - cat /proc/sys/kernel/hostname > "${svcdir}/hostname" - - if checkserver - then - # For server we do pretty much a standard boot ... - einfo "Server detected." - else - # - # Low-level Node Initialisation - # - einfo "Node detected." - - init_node - fi - fi - - # If a Adelie server, or normal Gentoo box, init swap ... - if checkserver - then - # Swap needs to be activated *after* devfs has been mounted and *after* - # devfsd has been started, so that the fstab can be properly parsed - # and only if the server/Gentoo box is initialized ... - ebegin "Activating swap" - /sbin/swapon -a &> /dev/null - eend 0 - rc_splash "start" - fi - - # Set the console loglevel to 1 for a cleaner boot - # the logger should anyhow dump the ring-0 buffer at start to the - # logs, and that with dmesg can be used to check for problems - /bin/dmesg -n 1 - - # $BOOT can be used by rc-scripts to test if it is the first time - # the 'boot' runlevel is executed. Now also needed by some stuff in - # the 'sysinit' runlevel ... - export BOOT="yes" - - # We do not want to break compadibility, so we do not fully integrate - # these into /sbin/rc, but rather start them by hand ... - for x in checkroot hostname modules checkfs localmount - do - source "/etc/init.d/${x}" || error "Failed to source /etc/init.d/${x}" - start || eerror "Failed to start /etc/init.d/${x}" - - if [ "$?" -ne 0 ] - then - echo - eerror "One of more critical startup scripts failed to start!" - eerror "Please correct this, and reboot ..." - echo; echo - /sbin/sulogin ${CONSOLE} - einfo "Unmounting filesystems" - /bin/mount -a -o remount,ro & >/dev/null - einfo "Rebooting" - /sbin/reboot -f - fi - rc_splash "start" - done - - # Check that $svcdir exists ... - check_statedir - - # Since we are using tmpfs or ramfs, just bin to $tsvcdir to $svcdir - if get_bootparam "tmpfs" || get_bootparam "ramfs" || [ "${svcmount}" = "yes" ] - then - mount --bind "${tsvcdir}" "${svcdir}" - fi - - # Clear $svcdir from stale entries - rm -rf "${svcdir}"/* - - # Save our bootsplash variables if needed :) - save_splash_info - - # Update the dependency cache - /sbin/depscan.sh - - # Now that the dependency cache are up to date, make sure these - # are marked as started ... - for x in checkroot hostname modules checkfs localmount - do - ln -snf "/etc/init.d/${x}" "${svcdir}/started/${x}" - done - -fi # Sysinit ends here - -if [ "${RUNLEVEL}" = "S" -a "${argv1}" = "boot" ] -then - # $BOOT can be used by rc-scripts to test if it is the first time - # the 'boot' runlevel is executed - export BOOT="yes" - - # Fix our bootsplash variables - get_splash_info - - rc_splash "start" - -fi - -if [ "${argv1}" = "sysinit" ] -then - exit 0 -fi - -if [ -z "${argv1}" ] -then - if [ -f "${svcdir}/softlevel" ] - then - export SOFTLEVEL="`cat ${svcdir}/softlevel`" - - # Fix our bootsplash variables - get_splash_info - - rc_splash "start" - else - export SOFTLEVEL="boot" - fi -else - export SOFTLEVEL="${argv1}" -fi - -if [ ! -f "${svcdir}/softlevel" ] -then - echo "${SOFTLEVEL}" > "${svcdir}/softlevel" -fi - -# For keeping a list of services that fails during boot/halt -if [ ! -d "${svcdir}/failed" ] -then - install -d -m0755 "${svcdir}/failed" -else - rm -rf "${svcdir}"/failed/* -fi - -if [ "${SOFTLEVEL}" = "reboot" -o "${SOFTLEVEL}" = "shutdown" ] -then - - # Figure out the number scripts we are going to stop for the progress meter :) - if [ -f /proc/splash ]; then - tscripts=`ls -1R ${svcdir}/started | grep -c $` - export cscripts=$((${tscripts} - 1)) - fi - - myscripts="" - - export HALT="${SOFTLEVEL}" - -elif [ ! -d "/etc/runlevels/${SOFTLEVEL}" ] -then - eerror "ERROR: runlevel ${SOFTLEVEL} does not exist; exiting..." - exit 1 -else - myscripts="" - if [ "${SOFTLEVEL}" != "boot" ] - then - # Normal runlevels *include* boot scripts - mylevels="$(dolisting "/etc/runlevels/${SOFTLEVEL}/")" - mylevels="${mylevels} $(dolisting /etc/runlevels/boot/)" - else - # Non-normal runlevels don't include boot scripts as default - mylevels="$(dolisting "/etc/runlevels/${SOFTLEVEL}/")" - fi - for x in ${mylevels} - do - if [ -L "${x}" ] - then - myscripts="${myscripts} ${x##*/}" - fi - done -fi - -# The softscripts dir contains all scripts that belong to the -# runlevel specified in ${svcdir}/softlevel -# It needs to be a new directory, else when stopping the services -# and the old directory is not intact, things get broken - -install -d -m0755 "${svcdir}/softscripts.new" - -for x in ${myscripts} -do - if [ ! -e "/etc/init.d/${x}" ] - then - ewarn "WARNING: /etc/init.d/${x} missing; skipping..." - continue - fi - # The -f eliminates a warning if the symlink already exists, - # which can happen if a service is in both the boot level and - # the current "normal" runlevel - ln -snf "/etc/init.d/${x}" "${svcdir}/softscripts.new/${x}" -done - -dep_stop() { - local x="" - local needsme="" - local myservice="" - local depservice="" - - [ ! -L "$1" ] && continue - if [ ! -e "$1" ] - then - # Remove dud symlinks - rm -f "$1" - continue - fi - myservice="${1##*/}" - - if [ ! -L "${svcdir}/softscripts.new/${myservice}" ] - then - # Candidate for zapping - - # Should not work for 'use' - if [ ! -d "${svcdir}/need/${myservice}" ] - then - # Nothing depends on me - if [ -L "${svcdir}/started/${myservice}" ] - then - "$1" stop - fi - else - # Something may depend on me - needsme=0 - for dep in $(dolisting "${svcdir}/need/${myservice}/") - do - if [ -L "${svcdir}/softscripts.new/${dep##*/}" -a -e "${dep}" ] - then - # This dep is valid - needsme=1 - break - fi - done - if [ "${needsme}" -eq 0 ] - then - if [ -L "${svcdir}/started/${myservice}" ] - then - "$1" stop - fi - fi - fi - fi -} - -# Stop services -for i in $(dolisting "${svcdir}/started/") -do - dep_stop "${i}" -# echo "dep_stop used" -done - -# Only change softlevel AFTER all the services have been stopped, -# else they will not get the depend's right (wrong SOFTLEVEL) - -echo "${SOFTLEVEL}" > "${svcdir}/softlevel" - -if [ "${SOFTLEVEL}" = "reboot" -o "${SOFTLEVEL}" = "shutdown" ] -then - source /sbin/functions.sh - - # Make sure that our $svcdir are clean for next reboot ... - rm -rf "${svcdir}"/* - - source /etc/init.d/halt.sh - - if [ "${SOFTLEVEL}" = "reboot" ] - then - source /etc/init.d/reboot.sh - else - source /etc/init.d/shutdown.sh - fi - # Should never get here - exit 0 -fi - -# Move the old softscritps directory to a different one -# and make the new softscripts directory the current - -mv -f "${svcdir}/softscripts" "${svcdir}/softscripts.old" -mv -f "${svcdir}/softscripts.new" "${svcdir}/softscripts" - -dep_start() { - local x="" - local myservice="" - local depservice="" - - if [ ! -L "$1" ] - then - continue - fi - # Only start a script if it isn't already running - myservice="${1##*/}" - if [ ! -L "${svcdir}/started/${myservice}" ] - then - "$1" start - rc_splash "start" - fi -} - -# Fix our bootsplash variables -get_splash_info - -rc_splash "start" - -# Start scripts -for i in $(dolisting "${svcdir}/softscripts/") -do - dep_start "${i}" - rc_splash "${i} start" -done - -# Clean the old runlevel -rm -rf "${svcdir}/softscripts.old" &> /dev/null - -# Depends gets nuked, so update them -# (this problem should be solved now, but i think it will be a good idea -# to recreate the deps after a change in runlevel) - -#/sbin/depscan.sh &>/dev/null - -# We want devfsd running after a change of runlevel (this is mostly if we return -# from runlevel 'single') -if [ -z "`ps --no-heading -C 'devfsd'`" -a \ - -n "`gawk '/\/dev devfs/ { print }' /proc/mounts 2> /dev/null`" ] -then - /sbin/devfsd /dev &> /dev/null -fi - -# Runlevel end, so clear stale fail list -rm -rf "${svcdir}/failed" &> /dev/null - -# If we were in the boot runlevel, it is done now ... -[ -n "${BOOT}" ] && unset BOOT - -# Save our bootsplash variables if needed :) -save_splash_info - -# vim:ts=4 diff --git a/src/livecd/profiles/rtcw-et/aux-files/rc.sbin b/src/livecd/profiles/rtcw-et/aux-files/rc.sbin deleted file mode 100644 index 42cbb86fd7..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/rc.sbin +++ /dev/null @@ -1,443 +0,0 @@ -#!/bin/bash -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/rtcw-et/aux-files/Attic/rc.sbin,v 1.1 2003/10/19 03:46:50 livewire Exp $ - - -trap ":" INT QUIT TSTP -source /sbin/functions.sh -umask 022 - -try() { - local retval=0 - # this works fine in test, but real life booting, fails for mounting /proc - # for instance, if we only check $?, thus we need to [ -n "${errstr}" ] - # as well - local errstr - errstr="$((eval $*) 2>&1 >/dev/null)" - retval=$? - if [ "${retval}" -ne 0 ] || \ - ([ -n "$(echo $* | egrep 'mount')" -a -n "${errstr}" ]) - then - echo -e "${ENDCOL}${NORMAL}[${BAD} oops ${NORMAL}]" - echo - eerror "The \"${1}\" command failed with error:" - echo - echo "${errstr#*: }" - echo - eerror "Since this is a critical task, startup cannot continue." - echo - /sbin/sulogin ${CONSOLE} - /sbin/reboot -f - fi - return ${retval} -} - -# save $1 -argv1="$1" - -# first time boot stuff goes here -if [ "${RUNLEVEL}" = "S" -a "${argv1}" = "boot" ] -then - # setup initial $PATH just in case - PATH="/bin:/sbin:/usr/bin:/usr/sbin:${PATH}" - - echo -e "${GOOD}Gentoo Linux${GENTOO_VERS}; \e[34;01mhttp://www.gentoo.org/${NORMAL}" - echo -e " Copyright 2001-2002 Gentoo Technologies, Inc.; Distributed under the GPL" - - ebegin "Mounting /proc"; \ - try mount -n /proc; \ - eend $? - - ebegin "Starting metalog" - start-stop-daemon --start --quiet --exec /usr/sbin/metalog \ - -- -p /var/run/metalog.pid --daemonize ${METALOG_OPTS} - eend $? "Failed to start metalog" - - # check if the user disabled devfs - devfs="yes" - get_bootparam "nodevfs" - if [ "$?" -eq 0 ] - then - devfs="no" - fi - - # fix weird bug where there is a /dev/.devfsd in a unmounted /dev - mymounts="$(awk '$3 ~ "devfs" { print $0 }' /proc/mounts)" - if [ -e /dev/.devfsd -a -z "${mymounts}" ] - then - rm -f /dev/.devfsd &>/dev/null - fi - - # with the new way, /dev can be mounted by the kernel ... - if [ "${devfs}" = "yes" -a ! -e /dev/.devfsd ] - then - mymounts="$(awk '$2 ~ "devfs" { print $0 }' /proc/filesystems)" - # is devfs support compiled in? - if [ -n "${mymounts}" ] - then - ebegin "Mounting devfs at /dev"; \ - try mount -n -t devfs none /dev; \ - eend $? - else - clear - echo - einfo "The Gentoo Linux system initialization scripts have detected that your" - einfo "kernel has been compiled without DEVFS support. Because Gentoo Linux" - einfo "has been designed to work with DEVFS, it is required that you compile" - einfo "support for it into your kernel. Please read the 'Gentoo Linux from" - einfo "source (build) CD Installation Guide' at:" - echo - einfo " http://www.gentoo.org/doc/build.html" - echo - einfo "for more information on how to do this." - echo - read -t 15 -p "(hit Enter to continue or wait 15 seconds...)" - fi - fi - - # need devfsd running now so that /dev/ram0 exists if we need it - mymounts="$(cat /proc/mounts)" - if [ "${devfs}" = "yes" -a -e /dev/.devfsd -a \ - "${mymounts/devfs//}" != "${mymounts}" ] - then - ebegin "Starting devfsd" - /sbin/devfsd /dev &>/dev/null - eend $? - fi - - if [ ! -d ${svcdir} ] - then - echo - eerror "For Gentoo Linux to function properly, \"${svcdir}\" need to exist." - eerror "Please mount your root partition read/write, and execute:" - echo - eerror " # mkdir -p ${svcdir}" - echo - echo - /sbin/sulogin ${CONSOLE} - mount -a -o remount,ro &>/dev/null - /sbin/reboot -f - fi - - # mount either a ramdisk or tmpfs and do dep scan - - # should we use tmpfs or a ramdisk ? - if ! get_bootparam "notmpfs" && \ - ([ "${svcfstype}" = "tmpfs" -o "${svcfstype}" != "ramfs" ]) - then - ebegin "Mounting tmpfs at ${svcdir}"; \ - try mount -n -t tmpfs tmpfs ${svcdir} \ - -o rw,mode=0644,size=${svcsize}k; \ - eend 0 - else - ebegin "Mounting ramdisk 0 at ${svcdir}"; \ - try dd if=/dev/zero of=/dev/ram0 bs=1k count=${svcsize}; \ - try /sbin/mke2fs -i 1024 -vm0 /dev/ram0 ${svcsize}; \ - try mount -n -t ext2 /dev/ram0 ${svcdir} -o rw; \ - eend 0 - fi - - if ! get_bootparam "notmpfs" && get_bootparam "ngpt" - then - # POSIX shared memory support - ebegin "Mounting POSIX shared memory" - mkdir -p /dev/shm - try mount -n -t tmpfs tmpfs /dev/shm - eend $? - - # NGPT support (http://www-124.ibm.com/developerworks/oss/pthreads/) - if [ -x /usr/bin/ngptinit ] - then - ebegin "Initializing NGPT" - /usr/bin/ngptinit &> /dev/null || : - eend $? - fi - fi - - /sbin/depscan.sh - - # Saving the kernel attributed hostname to a file for future - # initialisation selection: see /etc/init.d/switch. - get_bootparam "adelie" && cat /proc/sys/kernel/hostname > ${svcdir}/hostname - - get_bootparam "adelie" && einfo "Server/Node low-level initialisation..." - if checkserver - then - get_bootparam "adelie" && einfo "Server detected." - - # swap needs to be activated *after* devfs has been mounted and *after* - # devfsd has been started, so that the fstab can be properly parsed - # and only if the server is initialized - ebegin "Activating swap" - /sbin/swapon -a &>/dev/null - eend 0 - else - # - # Low-level Node Initialisation - # - einfo "Node detected." - ebegin "Importing local userspace on node" - - try mount -t tmpfs none ${shmdir} - - for DIR in /etc /var /root; - do - - if grep -q -v "^${DIR}[[:space:]]" /etc/exports - then - mount -o nolock -n server:${DIR} ${DIR} - fi - - if [ -e /etc/conf.d/exclude/${DIR} ] - then - find ${DIR} -type d | grep -v -f /etc/conf.d/exclude/${DIR} > ${shmdir}/${DIR}.lst - else - find ${DIR} -type d > ${shmdir}/${DIR}.lst - fi - - for SUBDIR in $(cat ${shmdir}/${DIR}.lst); - do - mkdir ${shmdir}/${SUBDIR} - chmod --reference=${SUBDIR} ${shmdir}/${SUBDIR} - cp -dp ${SUBDIR}/* ${shmdir}/${SUBDIR} &>/dev/null - done - - if [ -e /etc/conf.d/exclude/${DIR} ] - then - for EMPTYDIR in $(cat /etc/conf.d/exclude/${DIR}); - do - mkdir ${shmdir}/${EMPTYDIR} - chmod --reference=${SUBDIR} ${shmdir}/${SUBDIR} - done - fi - - umount -n ${DIR} > /dev/null - mount -n -o bind ${shmdir}/${DIR} ${DIR} - done - - mkdir ${shmdir}/tmp - chmod 0777 ${shmdir}/tmp - mount -n -o bind ${shmdir}/tmp /tmp - - cat /proc/mounts > /etc/mtab - - cp -f /etc/inittab.node /etc/inittab - [ -e /etc/fstab.node ] && cp -f /etc/fstab.node /etc/fstab - killall -1 init - - eend 0 - fi - - # set the console loglevel to 1 for a cleaner boot - # the logger should anyhow dump the ring-0 buffer at start to the - # logs, and that with dmesg can be used to check for problems - - /bin/dmesg -n 1 - - # $BOOT can be used by rc-scripts to test if it is the first time - # the 'boot' runlevel is executed - - export BOOT="yes" - -fi # boot ends here - -if [ -z "${argv1}" ] -then - if [ -f ${svcdir}/softlevel ] - then - export SOFTLEVEL="$(cat ${svcdir}/softlevel)" - else - export SOFTLEVEL="boot" - fi -else - export SOFTLEVEL="${argv1}" -fi - -if [ ! -f ${svcdir}/softlevel ] -then - echo "${SOFTLEVEL}" > ${svcdir}/softlevel -fi - -# for keeping a list of services that fails during boot/halt -if [ ! -d ${svcdir}/failed ] -then - install -d -m0755 ${svcdir}/failed -else - rm -rf ${svcdir}/failed/* -fi - -if [ "${SOFTLEVEL}" = "reboot" -o "${SOFTLEVEL}" = "shutdown" ] -then - myscripts="" -elif [ ! -d /etc/runlevels/${SOFTLEVEL} ] -then - eerror "ERROR: runlevel ${SOFTLEVEL} does not exist; exiting..." - exit 1 -else - myscripts="" - if [ "${SOFTLEVEL}" != "boot" ] - then - # normal runlevels *include* boot scripts - mylevels="$(dolisting /etc/runlevels/${SOFTLEVEL}/)" - mylevels="${mylevels} $(dolisting /etc/runlevels/boot/)" - else - # non-normal runlevels don't include boot scripts as default - mylevels="$(dolisting /etc/runlevels/${SOFTLEVEL}/)" - fi - for x in ${mylevels} - do - if [ -L "${x}" ] - then - myscripts="${myscripts} ${x##*/}" - fi - done -fi - -# the softscripts dir contains all scripts that belong to the -# runlevel specified in ${svcdir}/softlevel -# it needs to be a new directory, else when stopping the services -# and the old directory is not intact, things get broken - -install -d -m0755 ${svcdir}/softscripts.new - -for x in ${myscripts} -do - if [ ! -e "/etc/init.d/${x}" ] - then - ewarn "WARNING: /etc/init.d/${x} missing; skipping..." - continue - fi - # the -f eliminates a warning if the symlink already exists, - # which can happen if a service is in both the boot level and - # the current "normal" runlevel - ln -sf /etc/init.d/${x} ${svcdir}/softscripts.new/${x} -done - -dep_stop() { - local x="" - local needsme="" - local myservice="" - local depservice="" - [ ! -L $1 ] && continue - if [ ! -e $1 ] - then - # remove dud symlinks - rm $1 - continue - fi - myservice="${1##*/}" - - if [ ! -L "${svcdir}/softscripts.new/${myservice}" ] - then - # candidate for zapping - - # should not work for 'use' - if [ ! -d "${svcdir}/need/${myservice}" ] - then - # nothing depends on me - if [ -L "${svcdir}/started/${myservice}" ] - then - $1 stop - fi - else - # something may depend on me - needsme=0 - for dep in $(dolisting ${svcdir}/need/${myservice}/) - do - if [ -L "${svcdir}/softscripts.new/${dep##*/}" -a -e ${dep} ] - then - # this dep is valid - needsme=1 - break - fi - done - if [ "${needsme}" -eq 0 ] - then - if [ -L "${svcdir}/started/${myservice}" ] - then - $1 stop - fi - fi - fi - fi -} - -# stop services -for i in $(dolisting ${svcdir}/started/) -do - dep_stop ${i} -done - -# Only change softlevel AFTER all the services have been stopped, -# else they will not get the depend's right (wrong SOFTLEVEL) - -echo "${SOFTLEVEL}" > ${svcdir}/softlevel - -if [ "${SOFTLEVEL}" = "reboot" -o "${SOFTLEVEL}" = "shutdown" ] -then - source /sbin/functions.sh - source /etc/init.d/halt.sh - if [ "${SOFTLEVEL}" = "reboot" ] - then - source /etc/init.d/reboot.sh - else - source /etc/init.d/shutdown.sh - fi - # should never get here - exit 0 -fi - -# move the old softscritps directory to a different one -# and make the new softscripts directory the current - -mv ${svcdir}/softscripts ${svcdir}/softscripts.old &>/dev/null -mv ${svcdir}/softscripts.new ${svcdir}/softscripts &>/dev/null - -dep_start() { - local x="" - local myservice="" - local depservice="" - if [ ! -L $1 ] - then - continue - fi - # only start a script if it isn't already running - myservice="${1##*/}" - if [ ! -L "${svcdir}/started/${myservice}" ] - then - $1 start - fi -} - -# start scripts -for i in $(dolisting ${svcdir}/softscripts/) -do - dep_start ${i} -done - -# clean the old runlevel -rm -rf ${svcdir}/softscripts.old &>/dev/null - -# depends gets nuked, so update them -# (this problem should be solved now, but i think it will be a good idea -# to recreate the deps after a change in runlevel) - -#/sbin/depscan.sh &>/dev/null - -# we want devfsd running after a change of runlevel (this is mostly if we return -# from runlevel 'single') -if [ -z "$(ps -A | egrep 'devfsd')" -a \ - -n "$(cat /proc/mounts | egrep '/dev devfs')" ] -then - /sbin/devfsd /dev &>/dev/null -fi - -# runlevel end, so clear stale fail list -rm -rf ${svcdir}/failed &>/dev/null - -# if we were in the boot runlevel, it is done now ... -[ -n "${BOOT}" ] && unset BOOT - - -# vim:ts=4 diff --git a/src/livecd/profiles/rtcw-et/aux-files/resolv.conf b/src/livecd/profiles/rtcw-et/aux-files/resolv.conf deleted file mode 100644 index ab1cae14ce..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/resolv.conf +++ /dev/null @@ -1 +0,0 @@ -nameserver ##NS1## diff --git a/src/livecd/profiles/rtcw-et/aux-files/root.tar.bz2 b/src/livecd/profiles/rtcw-et/aux-files/root.tar.bz2 Binary files differdeleted file mode 100644 index 65d122e7b8..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/root.tar.bz2 +++ /dev/null diff --git a/src/livecd/profiles/rtcw-et/aux-files/splash b/src/livecd/profiles/rtcw-et/aux-files/splash deleted file mode 100644 index 56e748a0b4..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/splash +++ /dev/null @@ -1,71 +0,0 @@ -#!/bin/bash -# -# splash.sh - script to paint progress bar during -# system startup/shutdown. This script is solely run -# by the init scripts (shell function rc_splash) -# -# (w) 2002-2003 Stefan Reinauer, <stepan@suse.de> -# Modified for Gentoo by Jay Pfeifer <pfeifer@gentoo.org> -# It's licensed under GPL, of course. -# -# this script expects the following environment variables: -# sscripts = number of start scripts to be executed for runlevel change -# kscripts = number of stop scripts to be executed for runlevel change -# progress = number of currently executed start/stop script - -# execute splash binary utility because we are a wrapper: -if [ "$1" == "-s" -o "$1" == "-u" -o "$1" == "-n" -o "$1" == "-f" ]; then - exec /sbin/splash.bin $* -else - ( exec /sbin/splash.bin "$*" ) -fi - -# assertions -test -r /proc/splash || exit 0 -sparam=$1 - -# - -function box() { true; } # ignore box descriptions in the config file - -if [ -f /etc/bootsplash/default/config/bootsplash-`fbresolution`.cfg ]; then - . /etc/bootsplash/default/config/bootsplash-`fbresolution`.cfg -fi - -# Print text string.. -if [ "${sparam}" = "begin" ]; then - fbtruetype.static -x ${text_x} -y ${text_y} -t ${text_color} -s ${text_size} \ - "Booting the system... Press F2 for verbose mode" 2> /dev/null - export startnum=$(( ${sscripts} + 5 )) - -fi - -if [ "${sparam}" = "end" ]; then - fbtruetype.static -x ${text_x} -y ${text_y} -t ${text_color} -s ${text_size} \ - "Shutting down the system... Press F2 for verbose mode" 2> /dev/null - export stopnum=$(( ${cscripts} / 4 )) -fi - -# Paint progressbar.. -#if [ "$1" = "start" ]; then -if [ "${#sparam}" -ge "5" ] && \ - [ `expr "${sparam}" : '.*\(.....\)'` = "start" ]; then - export startnum=$(( ${sscripts} + 5 )) - echo "show $(( 65534 * ( ${progress} + 1 ) / ${startnum} ))" > /proc/splash - #echo ${progress} ${sscripts} ${startnum} -# fbtruetype -x ${text_x} -y $((${text_y} + 70)) -t ${text_color} -s ${text_size} \ -# " " 2> /dev/null -# fbtruetype -x ${text_x} -y $((${text_y} + 70)) -t ${text_color} -s ${text_size} \ -# "$1" 2> /dev/null -fi -#if [ "$1" = "stop" ]; then -if [ "${#sparam}" -ge "4" ] && \ - [ `expr "${sparam}" : '.*\(....\)'` = "stop" ]; then - export stopnum=$(( ${cscripts} / 4 )) - echo "show $(( 65534 * ( ${progress} + 1 ) / ${stopnum} ))" > /proc/splash - #echo ${progress} ${sscripts} ${stopnum} -# fbtruetype -x ${text_x} -y $((${text_y} + 70)) -t ${text_color} -s ${text_size} \ -# " " 2> /dev/null -# fbtruetype -x ${text_x} -y $((${text_y} + 70)) -t ${text_color} -s ${text_size} \ -# "$1" 2> /dev/null -fi diff --git a/src/livecd/profiles/rtcw-et/aux-files/splash.bin b/src/livecd/profiles/rtcw-et/aux-files/splash.bin Binary files differdeleted file mode 100644 index be47b88ee5..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/splash.bin +++ /dev/null diff --git a/src/livecd/profiles/rtcw-et/aux-files/splash.sh b/src/livecd/profiles/rtcw-et/aux-files/splash.sh deleted file mode 100644 index a25b473471..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/splash.sh +++ /dev/null @@ -1,26 +0,0 @@ -# Prelim code to add bootsplash support to Gentoo :) -rc_splash() { - test -f /proc/splash || return 0 - if [ -n "`grep 'splash=silent' /proc/cmdline 2>/dev/null`" ]; then - /sbin/splash "$1" - export progress=$(( ${progress} + 1 )) - fi -} - -# Allows us to save variable info between runlevels (ie. rc iterations) -save_splash_info() { - if [ -f /proc/splash ]; then - echo ${sscripts} > ${svcdir}/sscripts.tmp - echo ${progress} > ${svcdir}/progress.tmp - fi -} - -# Retrieve splash state info -get_splash_info() { - if [ -f /proc/splash ]; then - export sscripts=`cat ${svcdir}/sscripts.tmp` - export progress=`cat ${svcdir}/progress.tmp` - fi -} - - diff --git a/src/livecd/profiles/rtcw-et/aux-files/usleep b/src/livecd/profiles/rtcw-et/aux-files/usleep Binary files differdeleted file mode 100644 index 4bee8c4bc1..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/usleep +++ /dev/null diff --git a/src/livecd/profiles/rtcw-et/aux-files/xfree-nvidia b/src/livecd/profiles/rtcw-et/aux-files/xfree-nvidia deleted file mode 100644 index 384c866ad7..0000000000 --- a/src/livecd/profiles/rtcw-et/aux-files/xfree-nvidia +++ /dev/null @@ -1,290 +0,0 @@ -########################################################################## -# Sample XF86Config file for NVIDIA XFree86 drivers. -# -# Refer to the XF86Config(4/5) man page for details about the format of -# this file. -# -# Be sure to replace the monitor values with correct values for your -# monitor! -########################################################################## - - -Section "Files" - - RgbPath "/usr/X11R6/lib/X11/rgb" - FontPath "unix/:-1" - -EndSection - - -########################################################################## -# Server flags section. -########################################################################## - -Section "ServerFlags" - - # Uncomment this to cause a core dump at the spot where a signal is - # received. This may leave the console in an unusable state, but may - # provide a better stack trace in the core dump to aid in debugging - #NoTrapSignals - - # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence - # This allows clients to receive this key event. - #DontZap - - # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching - # sequences. This allows clients to receive these key events. - #DontZoom - - # This allows the server to start up even if the - # mouse device can't be opened/initialised. - AllowMouseOpenFail - -EndSection - - -########################################################################## -# Input devices -########################################################################## - -# -# Keyboard section -# -Section "InputDevice" - - Identifier "Keyboard1" - Driver "Keyboard" - Option "AutoRepeat" "250 30" - - Option "XkbRules" "xfree86" - Option "XkbModel" "pc105" - Option "XkbLayout" "us" - -EndSection - - -# -# Pointer section -# -Section "InputDevice" - - Identifier "Mouse1" - Driver "mouse" - Option "Protocol" "IMPS/2" - Option "Device" "/dev/input/mice" - Option "Buttons" "7" - Option "ZAxisMapping" "4 5" -EndSection - - -########################################################################## -# Module section -########################################################################## - -Section "Module" - - Load "dbe" - - # Load the glx module. - Load "glx" - - Load "extmod" - - Load "type1" - Load "freetype" -EndSection - - -########################################################################## -# Monitor section -########################################################################## - -Section "Monitor" - - Identifier "MyMonitor" - VendorName "Mitsubisi" - ModelName "Diamond Plus 120u" - - # be sure to replace these values with values appropriate for your - # monitor! -# HorizSync 31-82 -# VertRefresh 55-120 - -EndSection - - -########################################################################## -# Graphics device section(s) -########################################################################## - -Section "Device" - Identifier "NV AGP" - VendorName "nvidia" - Driver "nvidia" - # update this with the PCI id of your card. Consult the output - # of the 'lspci' command. -# BusID "PCI:1:0:0" - Option "NoLogo" "1" -# Option "NoDDC" "1" -EndSection - -Section "Device" - Identifier "NV PCI" - VendorName "nvidia" - Driver "nvidia" - # update this with the PCI id of your card. Consult the output - # of the 'lspci' command. - BusID "PCI:0:13:0" -EndSection - -Section "Device" - Identifier "NV AGP TwinView" - VendorName "nvidia" - Driver "nvidia" - # update this with the PCI id of your card. Consult the output - # of the 'lspci' command. - BusID "PCI:1:0:0" - - # sample twinview setup - Option "TwinView" - # be sure to replace the HorizSync and VertRefresh with correct values - # for your monitor! - Option "SecondMonitorHorizSync" "31-82" - Option "SecondMonitorVertRefresh" "55-120" - Option "TwinViewOrientation" "RightOf" - Option "MetaModes" "1280x1024,1280x1024; 1024x768,1024x768" - Option "ConnectedMonitor" "crt,crt" -EndSection - - -########################################################################## -# Screen sections -########################################################################## - -# -# screen section for an nvidia AGP card -# -Section "Screen" - Identifier "Screen AGP" - Device "NV AGP" - Monitor "MyMonitor" - DefaultColorDepth 24 - DefaultFbBpp 32 - Subsection "Display" - Depth 8 - Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x400" - EndSubsection - Subsection "Display" - Depth 16 - Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - Subsection "Display" - Depth 24 - Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - -EndSection - - -# -# screen section for an nvidia PCI card -# -Section "Screen" - Identifier "Screen PCI" - Device "NV PCI" - Monitor "MyMonitor" - DefaultColorDepth 24 - Subsection "Display" - Depth 8 - Modes "1280x1024" "1024x768" "800x600" "640x400" - EndSubsection - Subsection "Display" - Depth 16 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - Subsection "Display" - Depth 24 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection -EndSection - -# -# screen section for an nvidia AGP TwinView card -# (look at the appropriate Device section) -# -Section "Screen" - Identifier "Screen AGP TwinView" - Device "NV AGP TwinView" - Monitor "MyMonitor" - DefaultColorDepth 24 - Subsection "Display" - Depth 8 - Modes "1280x1024" "1024x768" "800x600" "640x400" - EndSubsection - Subsection "Display" - Depth 16 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - Subsection "Display" - Depth 24 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection -EndSection - - -########################################################################## -# ServerLayout sections -# (invoke using the '-layout' option of 'startx'. -########################################################################## - -# -# just one agp card -# -Section "ServerLayout" - Identifier "AGP" - Screen "Screen AGP" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# just one pci card -# -Section "ServerLayout" - Identifier "PCI" - Screen "Screen PCI" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# 2 cards, non twinview -# -Section "ServerLayout" - Identifier "Both" - Screen "Screen AGP" - Screen "Screen PCI" LeftOf "Screen AGP" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# just one agp twinview card -# -Section "ServerLayout" - Identifier "AGPTwinView" - Screen "Screen AGP TwinView" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# 2 cards, one agp twinview and one pci (3 monitors total) -# -Section "ServerLayout" - Identifier "BothTwinView" - Screen "Screen AGP TwinView" - Screen "Screen PCI" LeftOf "Screen AGP TwinView" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection diff --git a/src/livecd/profiles/rtcw-et/bash_profile b/src/livecd/profiles/rtcw-et/bash_profile deleted file mode 100644 index cd8b190774..0000000000 --- a/src/livecd/profiles/rtcw-et/bash_profile +++ /dev/null @@ -1,6 +0,0 @@ -#!/bin/bash -if [ -e /etc/startgame ] - then - rm -f /etc/startgame - /usr/sbin/x-setup -fi diff --git a/src/livecd/profiles/rtcw-et/boot.msg b/src/livecd/profiles/rtcw-et/boot.msg deleted file mode 100644 index dba36228ba..0000000000 --- a/src/livecd/profiles/rtcw-et/boot.msg +++ /dev/null @@ -1,4 +0,0 @@ -17 gentoo.lss - -Gentoo Linux 1.4 http://www.gentoo.org/ RELEASE: 1.4-Release -Enter to boot; F2 for options. diff --git a/src/livecd/profiles/rtcw-et/boot1.msg b/src/livecd/profiles/rtcw-et/boot1.msg deleted file mode 100644 index f81f7531f7..0000000000 --- a/src/livecd/profiles/rtcw-et/boot1.msg +++ /dev/null @@ -1,24 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - -Welcome .... - -Hold shift key while booting for options menu , Then press F2 for help diff --git a/src/livecd/profiles/rtcw-et/bootsplash.cfg b/src/livecd/profiles/rtcw-et/bootsplash.cfg deleted file mode 100644 index d1b48284fd..0000000000 --- a/src/livecd/profiles/rtcw-et/bootsplash.cfg +++ /dev/null @@ -1,56 +0,0 @@ -# This is a bootsplash configuration file for -# theme SuSE, resolution 1024x768. See -# ftp://ftp.suse.com/pub/people/stepan/bootsplash for -# more information. Comments are welcome by stepan@suse.de - -# config file version -version=3 - -# should the picture be displayed? -state=1 - -# fgcolor is the text forground color. -# bgcolor is the text background (i.e. transparent) color. -fgcolor=7 -bgcolor=0 - -# (tx, ty) are the (x, y) coordinates of the text window in pixels. -# tw/th is the width/height of the text window in pixels. -tx=25 -ty=28 -tw=979 -th=629 - -# ttf message output parameters -text_x=220 -text_y=480 -text_size=18 -text_color=0xeef4ff - -# name of the picture file (full path recommended) -silentjpeg=/home/drobbins/graphics/games/et1024.jpg -jpeg=/home/drobbins/graphics/games/et1024.jpg -#silentjpeg=/aa1024.jpg -progress_enable=1 - -# background -box silent noover 204 562 820 592 #04045498 -box silent inter 204 563 204 591 #ffffff #ffffff #526bb0 #526bb0 -box silent 204 563 820 591 #ffffff #ffffff #526bb0 #526bb0 -# black border -box silent 204 562 820 562 #313234 -box silent 204 592 820 592 #eef4ff -box silent 204 592 204 592 #313234 -box silent 820 592 820 592 #eef4ff - -# text box (left, top) -box 19 19 19 679 #313234 -box 19 19 1005 19 #313234 -# (right, bottom) -box 1005 19 1005 679 #eef4ff -box 19 679 1005 679 #eef4ff - -# box itself -box noover 20 20 1004 678 #04045498 - -overpaintok=1 diff --git a/src/livecd/profiles/rtcw-et/ck-config b/src/livecd/profiles/rtcw-et/ck-config deleted file mode 100644 index 407f35260d..0000000000 --- a/src/livecd/profiles/rtcw-et/ck-config +++ /dev/null @@ -1,1233 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_LOLAT=y -# CONFIG_LOLAT_SYSCTL is not set -# CONFIG_M386 is not set -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M686 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -CONFIG_MK7=y -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -CONFIG_X86_WP_WORKS_OK=y -CONFIG_X86_INVLPG=y -CONFIG_X86_CMPXCHG=y -CONFIG_X86_XADD=y -CONFIG_X86_BSWAP=y -CONFIG_X86_POPAD_OK=y -# CONFIG_RWSEM_GENERIC_SPINLOCK is not set -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_X86_L1_CACHE_SHIFT=6 -CONFIG_X86_HAS_TSC=y -CONFIG_X86_GOOD_APIC=y -CONFIG_X86_USE_3DNOW=y -CONFIG_X86_PGE=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_F00F_WORKS_OK=y -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -CONFIG_PREEMPT=y -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set -CONFIG_X86_TSC=y -CONFIG_HAVE_DEC_LOCK=y - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -CONFIG_CARDBUS=y -CONFIG_TCIC=y -CONFIG_I82092=y -CONFIG_I82365=y - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -# CONFIG_CISS_SCSI_TAPE is not set -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -# CONFIG_CDROM_PKTCDVD is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -# CONFIG_BLK_DEV_IDESCSI is not set -CONFIG_IDE_TASK_IOCTL=y -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_CMD680 is not set -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -# CONFIG_PDC202XX_BURST is not set -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -# CONFIG_SCSI is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_BOOT is not set -# CONFIG_FUSION_ISENSE is not set -# CONFIG_FUSION_CTL is not set -# CONFIG_FUSION_LAN is not set - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -# CONFIG_IEEE1394_SBP2 is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -CONFIG_PCMCIA_IBMTR=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_AIRONET4500_CS=m - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=m - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -CONFIG_AGP_INTEL=y -CONFIG_AGP_I810=y -CONFIG_AGP_VIA=y -CONFIG_AGP_AMD=y -CONFIG_AGP_AMD_8151=y -CONFIG_AGP_SIS=y -CONFIG_AGP_ALI=y -CONFIG_AGP_SWORKS=y -CONFIG_DRM=y -# CONFIG_DRM_OLD is not set -CONFIG_DRM_NEW=y -CONFIG_DRM_TDFX=m -CONFIG_DRM_R128=m -CONFIG_DRM_RADEON=m -CONFIG_DRM_I810=m -CONFIG_DRM_I810_XFREE_41=y -CONFIG_DRM_I830=m -CONFIG_DRM_MGA=m -CONFIG_DRM_SIS=m - -# -# PCMCIA character devices -# -CONFIG_PCMCIA_SERIAL_CS=m -CONFIG_SYNCLINK_CS=m -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_SUPERMOUNT is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_DMAPI is not set -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_SOUND_ALI5455=m -CONFIG_SOUND_BT878=m -CONFIG_SOUND_CMPCI=m -# CONFIG_SOUND_CMPCI_FM is not set -# CONFIG_SOUND_CMPCI_MIDI is not set -# CONFIG_SOUND_CMPCI_JOYSTICK is not set -# CONFIG_SOUND_CMPCI_CM8738 is not set -CONFIG_SOUND_EMU10K1=m -# CONFIG_MIDI_EMU10K1 is not set -CONFIG_SOUND_FUSION=m -CONFIG_SOUND_CS4281=m -CONFIG_SOUND_ES1370=m -CONFIG_SOUND_ES1371=m -CONFIG_SOUND_ESSSOLO1=m -CONFIG_SOUND_MAESTRO=m -CONFIG_SOUND_MAESTRO3=m -CONFIG_SOUND_FORTE=m -CONFIG_SOUND_ICH=m -CONFIG_SOUND_RME96XX=m -CONFIG_SOUND_SONICVIBES=m -CONFIG_SOUND_TRIDENT=m -CONFIG_SOUND_MSNDCLAS=m -# CONFIG_MSNDCLAS_HAVE_BOOT is not set -CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin" -CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin" -CONFIG_SOUND_MSNDPIN=m -# CONFIG_MSNDPIN_HAVE_BOOT is not set -CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin" -CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin" -CONFIG_SOUND_VIA82CXXX=m -# CONFIG_MIDI_VIA82CXXX is not set -CONFIG_SOUND_OSS=m -# CONFIG_SOUND_TRACEINIT is not set -# CONFIG_SOUND_DMAP is not set -CONFIG_SOUND_AD1816=m -CONFIG_SOUND_SGALAXY=m -CONFIG_SOUND_ADLIB=m -CONFIG_SOUND_ACI_MIXER=m -CONFIG_SOUND_CS4232=m -CONFIG_SOUND_SSCAPE=m -CONFIG_SOUND_GUS=m -# CONFIG_SOUND_GUS16 is not set -# CONFIG_SOUND_GUSMAX is not set -CONFIG_SOUND_VMIDI=m -CONFIG_SOUND_TRIX=m -CONFIG_SOUND_MSS=m -CONFIG_SOUND_MPU401=m -CONFIG_SOUND_NM256=m -CONFIG_SOUND_MAD16=m -# CONFIG_MAD16_OLDCARD is not set -CONFIG_SOUND_PAS=m -# CONFIG_PAS_JOYSTICK is not set -CONFIG_SOUND_PSS=m -# CONFIG_PSS_MIXER is not set -# CONFIG_PSS_HAVE_BOOT is not set -CONFIG_SOUND_SB=m -CONFIG_SOUND_AWE32_SYNTH=m -CONFIG_SOUND_WAVEFRONT=m -CONFIG_SOUND_MAUI=m -CONFIG_SOUND_YM3812=m -CONFIG_SOUND_OPL3SA1=m -CONFIG_SOUND_OPL3SA2=m -CONFIG_SOUND_YMFPCI=m -# CONFIG_SOUND_YMFPCI_LEGACY is not set -CONFIG_SOUND_UART6850=m -CONFIG_SOUND_AEDSP16=m -# CONFIG_SC6600 is not set -# CONFIG_AEDSP16_SBPRO is not set -# CONFIG_AEDSP16_MSS is not set -# CONFIG_AEDSP16_MPU401 is not set -# CONFIG_SOUND_TVMIXER is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_UHCI=y -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=y -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -CONFIG_USB_HIDDEV=y -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -# CONFIG_USB_LCD is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/rtcw-et/gaming-config b/src/livecd/profiles/rtcw-et/gaming-config deleted file mode 100644 index da32fb4475..0000000000 --- a/src/livecd/profiles/rtcw-et/gaming-config +++ /dev/null @@ -1,1243 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_LOLAT=y -# CONFIG_LOLAT_SYSCTL is not set -# CONFIG_M386 is not set -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -CONFIG_M68631=y -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -CONFIG_X86_WP_WORKS_OK=y -CONFIG_X86_INVLPG=y -CONFIG_X86_CMPXCHG=y -CONFIG_X86_XADD=y -CONFIG_X86_BSWAP=y -CONFIG_X86_POPAD_OK=y -# CONFIG_RWSEM_GENERIC_SPINLOCK is not set -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_X86_L1_CACHE_SHIFT=5 -CONFIG_X86_HAS_TSC=y -CONFIG_X86_GOOD_APIC=y -CONFIG_X86_PGE=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -CONFIG_PREEMPT=y -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set -CONFIG_X86_TSC=y -CONFIG_HAVE_DEC_LOCK=y - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -CONFIG_CARDBUS=y -CONFIG_TCIC=y -CONFIG_I82092=y -CONFIG_I82365=y - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -# CONFIG_CISS_SCSI_TAPE is not set -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -# CONFIG_CDROM_PKTCDVD is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -# CONFIG_BLK_DEV_IDESCSI is not set -CONFIG_IDE_TASK_IOCTL=y -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_CMD680 is not set -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -# CONFIG_PDC202XX_BURST is not set -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -# CONFIG_SCSI is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_BOOT is not set -# CONFIG_FUSION_ISENSE is not set -# CONFIG_FUSION_CTL is not set -# CONFIG_FUSION_LAN is not set - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -# CONFIG_IEEE1394_SBP2 is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -CONFIG_PCMCIA_IBMTR=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_AIRONET4500_CS=m - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -CONFIG_INPUT_EVDEV=y - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -CONFIG_AGP_INTEL=y -CONFIG_AGP_I810=y -CONFIG_AGP_VIA=y -CONFIG_AGP_AMD=y -CONFIG_AGP_AMD_8151=y -CONFIG_AGP_SIS=y -CONFIG_AGP_ALI=y -CONFIG_AGP_SWORKS=y -CONFIG_DRM=y -# CONFIG_DRM_OLD is not set -CONFIG_DRM_NEW=y -CONFIG_DRM_TDFX=m -CONFIG_DRM_R128=m -CONFIG_DRM_RADEON=m -CONFIG_DRM_I810=m -CONFIG_DRM_I810_XFREE_41=y -CONFIG_DRM_I830=m -CONFIG_DRM_MGA=m -CONFIG_DRM_SIS=m - -# -# PCMCIA character devices -# -CONFIG_PCMCIA_SERIAL_CS=m -CONFIG_SYNCLINK_CS=m -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_SUPERMOUNT is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_DMAPI is not set -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_SOUND_ALI5455=m -# CONFIG_SOUND_BT878 is not set -CONFIG_SOUND_CMPCI=m -# CONFIG_SOUND_CMPCI_FM is not set -# CONFIG_SOUND_CMPCI_MIDI is not set -# CONFIG_SOUND_CMPCI_JOYSTICK is not set -# CONFIG_SOUND_CMPCI_CM8738 is not set -CONFIG_SOUND_EMU10K1=m -# CONFIG_MIDI_EMU10K1 is not set -CONFIG_SOUND_FUSION=m -CONFIG_SOUND_CS4281=m -CONFIG_SOUND_ES1370=m -CONFIG_SOUND_ES1371=m -CONFIG_SOUND_ESSSOLO1=m -CONFIG_SOUND_MAESTRO=m -CONFIG_SOUND_MAESTRO3=m -CONFIG_SOUND_FORTE=m -CONFIG_SOUND_ICH=m -CONFIG_SOUND_RME96XX=m -CONFIG_SOUND_SONICVIBES=m -CONFIG_SOUND_TRIDENT=m -CONFIG_SOUND_MSNDCLAS=m -# CONFIG_MSNDCLAS_HAVE_BOOT is not set -CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin" -CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin" -CONFIG_SOUND_MSNDPIN=m -# CONFIG_MSNDPIN_HAVE_BOOT is not set -CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin" -CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin" -CONFIG_SOUND_VIA82CXXX=m -# CONFIG_MIDI_VIA82CXXX is not set -CONFIG_SOUND_OSS=m -# CONFIG_SOUND_TRACEINIT is not set -# CONFIG_SOUND_DMAP is not set -CONFIG_SOUND_AD1816=m -CONFIG_SOUND_SGALAXY=m -CONFIG_SOUND_ADLIB=m -CONFIG_SOUND_ACI_MIXER=m -CONFIG_SOUND_CS4232=m -CONFIG_SOUND_SSCAPE=m -CONFIG_SOUND_GUS=m -# CONFIG_SOUND_GUS16 is not set -# CONFIG_SOUND_GUSMAX is not set -CONFIG_SOUND_VMIDI=m -CONFIG_SOUND_TRIX=m -CONFIG_SOUND_MSS=m -CONFIG_SOUND_MPU401=m -CONFIG_SOUND_NM256=m -CONFIG_SOUND_MAD16=m -# CONFIG_MAD16_OLDCARD is not set -CONFIG_SOUND_PAS=m -# CONFIG_PAS_JOYSTICK is not set -CONFIG_SOUND_PSS=m -# CONFIG_PSS_MIXER is not set -# CONFIG_PSS_HAVE_BOOT is not set -CONFIG_SOUND_SB=m -CONFIG_SOUND_AWE32_SYNTH=m -CONFIG_SOUND_WAVEFRONT=m -CONFIG_SOUND_MAUI=m -CONFIG_SOUND_YM3812=m -CONFIG_SOUND_OPL3SA1=m -CONFIG_SOUND_OPL3SA2=m -CONFIG_SOUND_YMFPCI=m -# CONFIG_SOUND_YMFPCI_LEGACY is not set -CONFIG_SOUND_UART6850=m -CONFIG_SOUND_AEDSP16=m -# CONFIG_SC6600 is not set -# CONFIG_AEDSP16_SBPRO is not set -# CONFIG_AEDSP16_MSS is not set -# CONFIG_AEDSP16_MPU401 is not set -# CONFIG_SOUND_TVMIXER is not set - -# -# USB support -# -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=m -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=m -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -CONFIG_USB_HIDDEV=y -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -# CONFIG_USB_LCD is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/rtcw-et/gaming-config2 b/src/livecd/profiles/rtcw-et/gaming-config2 deleted file mode 100644 index 6e54131e6e..0000000000 --- a/src/livecd/profiles/rtcw-et/gaming-config2 +++ /dev/null @@ -1,1309 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_LOLAT=y -# CONFIG_LOLAT_SYSCTL is not set -# CONFIG_M386 is not set -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -# CONFIG_M68631 is not set -CONFIG_MPENTIUMIII=y -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -CONFIG_X86_WP_WORKS_OK=y -CONFIG_X86_INVLPG=y -CONFIG_X86_CMPXCHG=y -CONFIG_X86_XADD=y -CONFIG_X86_BSWAP=y -CONFIG_X86_POPAD_OK=y -# CONFIG_RWSEM_GENERIC_SPINLOCK is not set -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_X86_L1_CACHE_SHIFT=5 -CONFIG_X86_HAS_TSC=y -CONFIG_X86_GOOD_APIC=y -CONFIG_X86_PGE=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_F00F_WORKS_OK=y -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -CONFIG_SMP=y -CONFIG_PREEMPT=y -# CONFIG_MULTIQUAD is not set -# CONFIG_X86_TSC_DISABLE is not set -CONFIG_X86_TSC=y -CONFIG_HAVE_DEC_LOCK=y - -# -# General setup -# -CONFIG_NET=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -# CONFIG_PCMCIA is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_IBM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -# CONFIG_ACPI_HT_ONLY is not set -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -# CONFIG_CDROM_PKTCDVD is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -# CONFIG_NETFILTER is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_IPV6=y -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_CMD680 is not set -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -# CONFIG_PDC202XX_BURST is not set -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -# CONFIG_SCSI_SYM53C8XX is not set -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -CONFIG_EQUALIZER=y -CONFIG_TUN=m -CONFIG_ETHERTAP=y -CONFIG_NET_SB1000=m - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -CONFIG_FDDI=y -CONFIG_DEFXX=m -CONFIG_SKFP=m -CONFIG_HIPPI=y -CONFIG_ROADRUNNER=m -# CONFIG_ROADRUNNER_LARGE_RINGS is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_STRIP is not set -# CONFIG_WAVELAN is not set -# CONFIG_ARLAN is not set -# CONFIG_AIRONET4500 is not set -# CONFIG_AIRONET4500_NONCS is not set -# CONFIG_AIRONET4500_PROC is not set -# CONFIG_AIRO is not set -# CONFIG_HERMES is not set -# CONFIG_PLX_HERMES is not set -# CONFIG_PCI_HERMES is not set -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_IRDA_DEBUG=y - -# -# Infrared-port device drivers -# -CONFIG_IRTTY_SIR=m -CONFIG_IRPORT_SIR=m -CONFIG_DONGLE=y -CONFIG_ESI_DONGLE=m -CONFIG_ACTISYS_DONGLE=m -CONFIG_TEKRAM_DONGLE=m -CONFIG_GIRBIL_DONGLE=m -CONFIG_LITELINK_DONGLE=m -CONFIG_MCP2120_DONGLE=m -CONFIG_OLD_BELKIN_DONGLE=m -CONFIG_ACT200L_DONGLE=m -CONFIG_MA600_DONGLE=m -CONFIG_USB_IRDA=m -CONFIG_NSC_FIR=m -CONFIG_WINBOND_FIR=m -CONFIG_TOSHIBA_FIR=m -CONFIG_SMC_IRCC_FIR=m -CONFIG_ALI_FIR=m -CONFIG_VLSI_FIR=m - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -CONFIG_ISDN_DRV_LOOP=m -CONFIG_ISDN_DIVERSION=m - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -CONFIG_AGP_INTEL=y -CONFIG_AGP_I810=y -CONFIG_AGP_VIA=y -CONFIG_AGP_AMD=y -# CONFIG_AGP_AMD_8151 is not set -CONFIG_AGP_SIS=y -CONFIG_AGP_ALI=y -# CONFIG_AGP_SWORKS is not set -# CONFIG_DRM is not set -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_SUPERMOUNT is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -CONFIG_XFS_QUOTA=y -CONFIG_XFS_DMAPI=y -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -# CONFIG_ZISOFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -CONFIG_VIDEO_SELECT=y -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -CONFIG_FB=y -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FB_LOGO_TUX is not set -# CONFIG_FB_LOGO_LARRY is not set -# CONFIG_FB_LOGO_GENTOO is not set -# CONFIG_FB_LOGO_G is not set -# CONFIG_FB_LOGO_PENGUIN is not set -CONFIG_FB_LOGO_POWEREDBY=y -# CONFIG_FB_RIVA is not set -# CONFIG_FB_CLGEN is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_VESA=y -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_HGA is not set -CONFIG_VIDEO_SELECT=y -# CONFIG_LPP is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -CONFIG_FB_VMWARE_SVGA=y -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_FBCON_SPLASHSCREEN=y -CONFIG_FBCON_CFB16=y -# CONFIG_FBCON_ADVANCED is not set -CONFIG_FBCON_CFB8=y -CONFIG_FBCON_CFB16=y -CONFIG_FBCON_CFB24=y -CONFIG_FBCON_CFB32=y -# CONFIG_FBCON_FONTWIDTH8_ONLY is not set -# CONFIG_FBCON_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_SOUND_ALI5455=m -CONFIG_SOUND_BT878=m -CONFIG_SOUND_CMPCI=m -# CONFIG_SOUND_CMPCI_FM is not set -# CONFIG_SOUND_CMPCI_MIDI is not set -# CONFIG_SOUND_CMPCI_JOYSTICK is not set -# CONFIG_SOUND_CMPCI_CM8738 is not set -CONFIG_SOUND_EMU10K1=m -# CONFIG_MIDI_EMU10K1 is not set -CONFIG_SOUND_FUSION=m -CONFIG_SOUND_CS4281=m -CONFIG_SOUND_ES1370=m -CONFIG_SOUND_ES1371=m -CONFIG_SOUND_ESSSOLO1=m -CONFIG_SOUND_MAESTRO=m -CONFIG_SOUND_MAESTRO3=m -CONFIG_SOUND_FORTE=m -CONFIG_SOUND_ICH=m -CONFIG_SOUND_RME96XX=m -CONFIG_SOUND_SONICVIBES=m -CONFIG_SOUND_TRIDENT=m -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -CONFIG_SOUND_VIA82CXXX=m -# CONFIG_MIDI_VIA82CXXX is not set -CONFIG_SOUND_OSS=m -# CONFIG_SOUND_TRACEINIT is not set -# CONFIG_SOUND_DMAP is not set -CONFIG_SOUND_AD1816=m -CONFIG_SOUND_SGALAXY=m -CONFIG_SOUND_ADLIB=m -CONFIG_SOUND_ACI_MIXER=m -CONFIG_SOUND_CS4232=m -CONFIG_SOUND_SSCAPE=m -CONFIG_SOUND_GUS=m -# CONFIG_SOUND_GUS16 is not set -# CONFIG_SOUND_GUSMAX is not set -# CONFIG_SOUND_VMIDI is not set -CONFIG_SOUND_TRIX=m -CONFIG_SOUND_MSS=m -# CONFIG_SOUND_MPU401 is not set -CONFIG_SOUND_NM256=m -CONFIG_SOUND_MAD16=m -# CONFIG_MAD16_OLDCARD is not set -CONFIG_SOUND_PAS=m -# CONFIG_PAS_JOYSTICK is not set -CONFIG_SOUND_PSS=m -# CONFIG_PSS_MIXER is not set -# CONFIG_PSS_HAVE_BOOT is not set -CONFIG_SOUND_SB=m -# CONFIG_SOUND_AWE32_SYNTH is not set -# CONFIG_SOUND_WAVEFRONT is not set -# CONFIG_SOUND_MAUI is not set -CONFIG_SOUND_YM3812=m -CONFIG_SOUND_OPL3SA1=m -CONFIG_SOUND_OPL3SA2=m -CONFIG_SOUND_YMFPCI=m -# CONFIG_SOUND_YMFPCI_LEGACY is not set -CONFIG_SOUND_UART6850=m -# CONFIG_SOUND_AEDSP16 is not set -# CONFIG_SOUND_TVMIXER is not set - -# -# USB support -# -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=m -CONFIG_USB_UHCI_ALT=m -CONFIG_USB_OHCI=m -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -CONFIG_USB_BLUETOOTH=m -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_TIGL=m -CONFIG_USB_BRLVGER=m -CONFIG_USB_LCD=m - -# -# Bluetooth support -# -CONFIG_BLUEZ=m -CONFIG_BLUEZ_L2CAP=m -CONFIG_BLUEZ_SCO=m -CONFIG_BLUEZ_BNEP=m -CONFIG_BNEP_MC_FILTER=y -CONFIG_BNEP_PROTO_FILTER=y - -# -# Bluetooth device drivers -# -CONFIG_BLUEZ_HCIUSB=m -# CONFIG_BLUEZ_USB_ZERO_PACKET is not set -CONFIG_BLUEZ_HCIUART=m -CONFIG_BLUEZ_HCIUART_H4=y -# CONFIG_BLUEZ_HCIDTL1 is not set -# CONFIG_BLUEZ_HCIBT3C is not set -# CONFIG_BLUEZ_HCIBLUECARD is not set -CONFIG_BLUEZ_HCIVHCI=m - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/rtcw-et/gentoo.lss b/src/livecd/profiles/rtcw-et/gentoo.lss Binary files differdeleted file mode 100644 index 6c7c89c82b..0000000000 --- a/src/livecd/profiles/rtcw-et/gentoo.lss +++ /dev/null diff --git a/src/livecd/profiles/rtcw-et/help.msg b/src/livecd/profiles/rtcw-et/help.msg deleted file mode 100644 index d020308813..0000000000 --- a/src/livecd/profiles/rtcw-et/help.msg +++ /dev/null @@ -1,26 +0,0 @@ -Gentoo Linux 1.4 LiveCD boot options - [F1 to redisplay boot graphic] - -At the prompt type "gentoo option" -available at prompt "gentoo,acpi,memtest" -or just hit enter if no options are needed. -Type "acpi option" at a prompt to enable acpi on the default gentoo kernel -If you experience a lockup please try to boot the cd after a poweroff. - -agpgart loads agpgart (use if you have graphic problems,lockups) -doscsi scan for scsi devices (breaks some ethernet cards) -nodetect causes hwsetup/kudzu and hotplug not to run -dofirewire modprobes firewire modules in initrd (for firewire cdroms,etc) -nousb disables usb module load from initrd, disables hotplug -nodhcp dhcp does not automatically start if nic detected -doataraid loads ide raid modules from initrd -dopcmcia starts pcmcia service -noapm disables apm module load -noraid disables loading of evms modules -nohotplug disables loading hotplug service -ide=nodma Force disabling of dma for malfunctioning ide devices -cdcache Cache the entire runtime portion of cd in ram, This - uses 40mb of RAM , but allows you to umount /mnt/cdrom - and mount another cdrom. -noraid disables autoloading of evms modules -dokeymap enable keymap selection for non-us keyboard layouts -noapic disable apic (try if having hardware problems ,nics,scsi,etc) diff --git a/src/livecd/profiles/rtcw-et/isolinux.cfg b/src/livecd/profiles/rtcw-et/isolinux.cfg deleted file mode 100644 index aa3743ee00..0000000000 --- a/src/livecd/profiles/rtcw-et/isolinux.cfg +++ /dev/null @@ -1,25 +0,0 @@ -default gentoo - -#timeout 10 -prompt 0 -#display boot.msg -display boot1.msg -F1 boot.msg -F2 help.msg - -label gentoo - kernel gentoo - append splash=silent vga=791 initrd=initrd.1024 acpi=off root=/dev/ram0 init=/linuxrc nomce - -label acpi - kernel gentoo - append splash=silent vga=791 initrd=initrd acpi=on root=/dev/ram0 init=/linuxrc nomce - -label nofb - kernel gentoo - append vga=normal initrd=initrd acpi=off root=/dev/ram0 init=/linuxrc nomce - -label memtest - kernel memtest - - diff --git a/src/livecd/profiles/rtcw-et/kernel-config b/src/livecd/profiles/rtcw-et/kernel-config deleted file mode 100644 index 466f2a02c3..0000000000 --- a/src/livecd/profiles/rtcw-et/kernel-config +++ /dev/null @@ -1,1294 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -# CONFIG_LOLAT is not set -# CONFIG_LOLAT_SYSCTL is not set -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M686 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -# CONFIG_MK7 is not set -# CONFIG_MK8 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_THINKPAD is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_1GB is not set -CONFIG_2GB=y -# CONFIG_3GB is not set -# CONFIG_05GB is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -CONFIG_CARDBUS=y -CONFIG_TCIC=y -CONFIG_I82092=y -CONFIG_I82365=y - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -CONFIG_EVMS_GPT_SEGMENT_MGR=m -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -# CONFIG_EVMS_OS2 is not set -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -# CONFIG_CRYPTO is not set -# CONFIG_CIPHERS is not set -# CONFIG_DIGESTS is not set -# CONFIG_CRYPTODEV is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_IPSEC is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -CONFIG_IDE_TASK_IOCTL=y -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_BLK_DEV_GENERIC is not set -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_TRIFLEX=y -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_BLK_DEV_NFORCE=y -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX_OLD=y -# CONFIG_PDC202XX_BURST is not set -CONFIG_BLK_DEV_PDC202XX_NEW=y -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_SC1200=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIIMAGE=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_PDC202XX=y -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m -CONFIG_BLK_DEV_ATARAID_SII=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_BUILD_FIRMWARE is not set -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -CONFIG_SCSI_SYM53C8XX=m -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -CONFIG_SCSI_PCMCIA=y -CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_FDOMAIN=m -CONFIG_PCMCIA_NINJA_SCSI=m -CONFIG_PCMCIA_QLOGIC=m - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_MAX_SGE=40 -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_TYPHOON=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_AMD8111_ETH=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -# CONFIG_EEPRO100_PIO is not set -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_R8169=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -CONFIG_PCMCIA_IBMTR=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_AIRONET4500_CS=m - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m -CONFIG_USB_AUERISDN=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_ECC is not set -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_IPMI_PANIC_EVENT is not set -# CONFIG_IPMI_DEVICE_INTERFACE is not set -# CONFIG_IPMI_KCS is not set -# CONFIG_IPMI_WATCHDOG is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_SCx200_GPIO is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set - -# -# PCMCIA character devices -# -CONFIG_PCMCIA_SERIAL_CS=m -CONFIG_SYNCLINK_CS=m -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_PROC_CONFIG=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -# CONFIG_IMON is not set - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=y -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=y -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -# CONFIG_USB_LCD is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Windows Applications support -# -# CONFIG_MKI is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/rtcw-et/keymaps/bin-keymaps.tar.gz b/src/livecd/profiles/rtcw-et/keymaps/bin-keymaps.tar.gz Binary files differdeleted file mode 100644 index 8895ca4689..0000000000 --- a/src/livecd/profiles/rtcw-et/keymaps/bin-keymaps.tar.gz +++ /dev/null diff --git a/src/livecd/profiles/rtcw-et/keymaps/key.lst b/src/livecd/profiles/rtcw-et/keymaps/key.lst deleted file mode 100644 index 7396871474..0000000000 --- a/src/livecd/profiles/rtcw-et/keymaps/key.lst +++ /dev/null @@ -1,10 +0,0 @@ -Please select a keymap from the following list by typing in the appropriate -name or number. Hit Enter for the default "us/41" US English keymap. - - 1 azerty 7 cf 13 es 19 il 25 mk 31 ru 37 trf - 2 be 8 croat 14 et 20 is 26 nl 32 se 38 trq - 3 bg 9 cz 15 fi 21 it 27 no 33 sg 39 ua - 4 br-a 10 de 16 fr 22 jp 28 pl 34 sk-y 40 uk - 5 br-l 11 dk 17 gr 23 la 29 pt 35 sk-z 41 us - 6 by 12 dvorak 18 hu 24 lt 30 ro 36 slovene 42 wangbe - diff --git a/src/livecd/profiles/rtcw-et/launcher/gamelaunch.pro b/src/livecd/profiles/rtcw-et/launcher/gamelaunch.pro deleted file mode 100644 index 81650932c1..0000000000 --- a/src/livecd/profiles/rtcw-et/launcher/gamelaunch.pro +++ /dev/null @@ -1,10 +0,0 @@ -SOURCES += main.cpp -unix { - UI_DIR = .ui - MOC_DIR = .moc - OBJECTS_DIR = .obj -} -FORMS = gamelaunch.ui -TEMPLATE =app -CONFIG += qt warn_on release -LANGUAGE = C++ diff --git a/src/livecd/profiles/rtcw-et/launcher/gamelaunch.ui b/src/livecd/profiles/rtcw-et/launcher/gamelaunch.ui deleted file mode 100644 index dea28d6fbc..0000000000 --- a/src/livecd/profiles/rtcw-et/launcher/gamelaunch.ui +++ /dev/null @@ -1,124 +0,0 @@ -<!DOCTYPE UI><UI version="3.1" stdsetdef="1"> -<class>dialog</class> -<widget class="QDialog"> - <property name="name"> - <cstring>dialog</cstring> - </property> - <property name="geometry"> - <rect> - <x>0</x> - <y>0</y> - <width>572</width> - <height>316</height> - </rect> - </property> - <property name="caption"> - <string>Gentoo GameCD Launcher</string> - </property> - <widget class="QPushButton"> - <property name="name"> - <cstring>restartb</cstring> - </property> - <property name="geometry"> - <rect> - <x>430</x> - <y>270</y> - <width>120</width> - <height>31</height> - </rect> - </property> - <property name="text"> - <string>&Restart</string> - </property> - </widget> - <widget class="QLabel"> - <property name="name"> - <cstring>pixmapLabel1</cstring> - </property> - <property name="geometry"> - <rect> - <x>170</x> - <y>150</y> - <width>231</width> - <height>110</height> - </rect> - </property> - <property name="text"> - <string></string> - </property> - <property name="pixmap"> - <pixmap>image0</pixmap> - </property> - <property name="scaledContents"> - <bool>false</bool> - </property> - </widget> - <widget class="QLabel"> - <property name="name"> - <cstring>textLabel1</cstring> - </property> - <property name="geometry"> - <rect> - <x>40</x> - <y>10</y> - <width>500</width> - <height>120</height> - </rect> - </property> - <property name="text"> - <string>Welcome to the <b>Return to Castle Wolfenstein: Enemy Territory</b> Gentoo GameCD! From this dialog, you can launch the game and restart your system. We hope you enjoy this Gentoo GameCD and special thanks to Id, Activision and SplashDamage for this free release!</string> - </property> - <property name="alignment"> - <set>WordBreak|AlignBottom</set> - </property> - </widget> - <widget class="QPushButton"> - <property name="name"> - <cstring>launchb</cstring> - </property> - <property name="geometry"> - <rect> - <x>20</x> - <y>270</y> - <width>400</width> - <height>31</height> - </rect> - </property> - <property name="font"> - <font> - </font> - </property> - <property name="text"> - <string>&Launch RTCW-ET</string> - </property> - </widget> -</widget> -<images> - <image name="image0"> - <data format="XPM.GZ" length="97577">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</data> - </image> -</images> -<connections> - <connection> - <sender>launchb</sender> - <signal>clicked()</signal> - <receiver>dialog</receiver> - <slot>launchGame()</slot> - </connection> - <connection> - <sender>restartb</sender> - <signal>clicked()</signal> - <receiver>dialog</receiver> - <slot>restartCD()</slot> - </connection> -</connections> -<includes> - <include location="local" impldecl="in implementation">gamelaunch.ui.h</include> -</includes> -<slots> - <slot>launchGame()</slot> - <slot>restartCD()</slot> - <slot>launchBrowser()</slot> -</slots> -<layoutdefaults spacing="6" margin="11"/> -</UI> diff --git a/src/livecd/profiles/rtcw-et/launcher/gamelaunch.ui.h b/src/livecd/profiles/rtcw-et/launcher/gamelaunch.ui.h deleted file mode 100644 index 645d0744b9..0000000000 --- a/src/livecd/profiles/rtcw-et/launcher/gamelaunch.ui.h +++ /dev/null @@ -1,35 +0,0 @@ -/**************************************************************************** -** ui.h extension file, included from the uic-generated form implementation. -** -** If you wish to add, delete or rename functions or slots use -** Qt Designer which will update this file, preserving your code. Create an -** init() function in place of a constructor, and a destroy() function in -** place of a destructor. -*****************************************************************************/ - -#include <unistd.h> - -void dialog::launchGame() -{ - - hide(); - system("/usr/bin/et"); - show(); -} - - - -void dialog::restartCD() -{ - hide(); - system("/sbin/reboot -ndfi"); - exit(0); -} - - -void dialog::launchBrowser() -{ - hide(); - system("/usr/bin/mozilla http://www.gentoo.org"); - show(); -} diff --git a/src/livecd/profiles/rtcw-et/launcher/main.cpp b/src/livecd/profiles/rtcw-et/launcher/main.cpp deleted file mode 100644 index 3e7b143061..0000000000 --- a/src/livecd/profiles/rtcw-et/launcher/main.cpp +++ /dev/null @@ -1,11 +0,0 @@ -#include <qapplication.h> -#include "gamelaunch.h" - -int main( int argc, char ** argv ) -{ - QApplication a( argc, argv ); - dialog w; - w.show(); - a.connect( &a, SIGNAL( lastWindowClosed() ), &a, SLOT( quit() ) ); - return a.exec(); -} diff --git a/src/livecd/profiles/rtcw-et/linuxrc b/src/livecd/profiles/rtcw-et/linuxrc deleted file mode 100644 index 77449bfb26..0000000000 --- a/src/livecd/profiles/rtcw-et/linuxrc +++ /dev/null @@ -1,278 +0,0 @@ -#!/bin/sh -# -# Script to boot up a system with autodetection of CD location -# -# Daniel Robbins <drobbins@gentoo.org> -# Copyright 2002 Gentoo Technologies, Inc. -# Distributed under the GPL - -PATH=/usr/sbin:/usr/bin:/sbin:/bin -BACK_UP="\033[1K\033[0G" -HILITE="\033[1m" -NORMAL="\033[0m" -WARN="\033[1m" -BAD="\033[1m" -mount -oremount,rw / -mount /proc -# Disable kernel messages to console: -echo "0" > /proc/sys/kernel/printk -SCSI="no" -CDCACHE="no" -IDEBUG="no" -FIREWIRE="no" -ATARAID="no" -PCMCIA="no" -DETECT="no" -USB="yes" -KEYMAP="no" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "doscsi" ] - then - SCSI="yes" - elif [ "$x" = "cdcache" ] - then - CDCACHE="yes" - elif [ "$x" = "idebug" ] - then - IDEBUG="yes" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "dofirewire" ] - then - FIREWIRE="yes" - fi -done -for x in $CMDLINE -do - if [ "$x" = "nousb" ] - then - USB="no" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "doataraid" ] - then - ATARAID="yes" - fi -done -for x in $CMDLINE -do - if [ "$x" = "dopcmcia" ] - then - PCMCIA="yes" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "dokeymap" ] - then - KEYMAP="yes" - fi -done - -blurb() { - echo -ne ${HILITE}${1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} - -# Create the new root FS -mkdir newroot -mount -t tmpfs tmpfs /newroot -cd /newroot -mkdir dev mnt mnt/cdrom mnt/cloop mnt/.init.d mnt/gentoo - -if [ ! -e /newroot/dev/.devfsd ] -then - #mount devfs - mount -t devfs devfs /newroot/dev -fi - -mounted="" - -initmsg() { - echo -e "${HILITE}${*}${NORMAL}" -} - -nocd() { - echo -e "${HILITE}---- CD not found${NORMAL}" - umount /newroot - ash - umount /proc - exec /linuxrc -} - -getkeymap() { - local mykeymap - echo -ne ${HILITE} - cat /keymaps/key.lst - echo -ne ${NORMAL} - read -p "Keymap selection: " mykeymap - if [ -e /keymaps/${mykeymap}.map ] - then - echo -e "${HILITE}---- Loading ${mykeymap} keymap${NORMAL}" - loadkmap < /keymaps/${mykeymap}.map - elif [ "$mykeymap" = "" ] - then - #default keymap is "us" - echo -e "${HILITE}---- Loading default (US) keymap${NORMAL}" - loadkmap < /keymaps/us.map - else - getkeymap - fi -} - -modules_scan() { - local type - type=${1}; shift - for x in "$@" - do - if [ ! -e /modules/${type}/${x}.o ] - then - echo -e "${HILITE}---- Module ${x}.o not found; skipping...${NORMAL}" - continue - fi - blurb "---- Scanning for ${x}..." - insmod -f /modules/${type}/${x}.o > /dev/null 2>&1 - if [ $? -eq 0 ] - then - backup - echo -e "${GOOD}---- Detected ${x} hardware${NORMAL}" - else - backup - echo -ne "${NORMAL}" - fi - done -} - -findmount() { - if [ "$*" = "" ] - then - nocd - fi - while ! mount -t iso9660 -r $1 /newroot/mnt/cdrom; do - shift - if [ "$1" = "" ]; then - nocd - fi - done - if [ ! -e /newroot/mnt/cdrom/livecd.cloop -a ! -e /newroot/mnt/cdrom/livecd.loop ]; then - echo -e "${HILITE}---- $1 is not a LiveCD; skipping...${NORMAL}" - umount /newroot/mnt/cdrom - shift - findmount $* - fi - mounted=$1 - #echo -e "${HILITE}---- CD medium found on $1${NORMAL}" -} - -# Mount the CD -if [ "$SCSI" = "yes" ] -then -DEVICE=SCSI - echo -e "${HILITE}---- Beginning storage detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan storage ##STORAGE_MODULES## -fi - -if [ "$FIREWIRE" = "yes" ] -then -DEVICE=FIREWIRE - echo -e "${HILITE}---- Beginning firewire detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan firewire ##FIREWIRE_MODULES## -fi -if [ "$ATARAID" = "yes" ] -then -DEVICE=ATARAID - echo -e "${HILITE}---- Beginning ata detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan ataraid ##ATARAID_MODULES## -fi - -if [ "$PCMCIA" = "yes" ] -then -DEVICE=PCMCIA - echo -e "${HILITE}---- Beginning pcmcia detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan pcmcia ##PCMCIA_MODULES## -fi -if [ "$USB" = "yes" ] -then -DEVICE=USB - echo -e "${HILITE}---- Beginning usb detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan usb ##USB_MODULES## -fi - -if [ "$KEYMAP" = "yes" ] -then -getkeymap -fi - -#initmsg "---- Mounting the CD" -findmount /newroot/dev/cdroms/* -if [ "$IDEBUG" = "yes" ] -then - exec /bin/sh -fi -if [ -e /newroot/mnt/cdrom/livecd.cloop ] -then - #compressed loopback - mknod /dev/cloop b 240 0 - if [ "$CDCACHE" = "yes" ] - then - #initmsg "---- Attempting to cache CD image to tmpfs" - cp /newroot/mnt/cdrom/livecd.cloop /newroot/mnt/ - if [ $? -ne 0 ] - then - #initmsg "---- Caching failed (likely due to lack of space" - CDCACHE="no" - rm -f /newroot/mnt/livecd.cloop - else - insmod /modules/cloop.o file=/newroot/mnt/livecd.cloop >/dev/null 2>&1 - mount -o ro -t ext2 /dev/cloop /newroot/mnt/cloop - fi - fi - if [ "$CDCACHE" = "no" ] - then - #initmsg "---- Mounting compressed loopback filesystem" - insmod /modules/cloop.o file=/newroot/mnt/cdrom/livecd.cloop >/dev/null 2>&1 - mount -o ro -t ext2 /dev/cloop /newroot/mnt/cloop - fi -else - mknod /dev/loop0 b 7 0 - #initmsg "---- Mounting loopback filesystem" - losetup /dev/loop0 /newroot/mnt/cdrom/livecd.loop - mount -o ro -t ext2 /dev/loop0 /newroot/mnt/cloop -fi -# Now the CD is mounted on /newroot/cdrom -#initmsg "---- Copying and symlinking files from CD to populate /" - -cd /newroot/ -for x in bin sbin lib boot usr opt install.txt -do - ln -s mnt/cloop/${x} ${x} -done -mkdir initrd proc tmp -chmod 1777 tmp -(cd /newroot/mnt/cloop; cp -a etc root home var /newroot) -#store name of mounted CD so we can add it to mtab.... (/etc/init.d/local will take it -#from here... -echo $mounted > tmp/mycd - -#initmsg "---- Switching to tmpfs root filesystem" -echo "6" > /proc/sys/kernel/printk -umount /proc -pivot_root . initrd -exec chroot . /sbin/init </dev/console >/dev/console 2>&1 diff --git a/src/livecd/profiles/rtcw-et/log b/src/livecd/profiles/rtcw-et/log deleted file mode 100644 index 9bbabc8086..0000000000 --- a/src/livecd/profiles/rtcw-et/log +++ /dev/null @@ -1,80 +0,0 @@ ---- ../k/pre-clean 2003-05-31 15:26:36.000000000 -0500 -+++ pre-clean 2003-05-31 15:26:38.000000000 -0500 -@@ -4,44 +4,44 @@ - #this fixes it.... - echo "above hid" > ${CD_BUILDCHROOT}/etc/modules.d/hidfix - #rm ${CD_BUILDCHROOT}/etc/init.d/iptables --install -d ${CD_BUILDCHROOT}/var/state/init.d || die -+#install -d ${CD_BUILDCHROOT}/var/state/init.d || die -+#install -d ${CD_BUILDCHROOT}/root/.armyops || die -+#install -d ${CD_BUILDCHROOT}/root/.armyops/System || die -+#cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/armyops/System/*.ini ${CD_BUILDCHROOT}/root/.armyops/System || die - cp ${CD_BUILDCHROOT}/etc/init.d/net.eth0 ${CD_BUILDCHROOT}/etc/init.d/net.eth1 - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/bash_profile ${CD_BUILDCHROOT}/root/.bash_profile || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/modules ${CD_BUILDCHROOT}/etc/init.d || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/checkroot ${CD_BUILDCHROOT}/etc/init.d || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/md ${CD_BUILDCHROOT}/etc/init.d || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/hotplug ${CD_BUILDCHROOT}/etc/init.d || die --cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/aumix ${CD_BUILDCHROOT}/etc/init.d || die -+#cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/aumix ${CD_BUILDCHROOT}/etc/init.d || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/checkfs ${CD_BUILDCHROOT}/etc/init.d || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/mingetty ${CD_BUILDCHROOT}/sbin || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/autoconfig ${CD_BUILDCHROOT}/etc/init.d || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/usleep ${CD_BUILDCHROOT}/sbin || die --#cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/depscan.sh ${CD_BUILDCHROOT}/sbin || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/login.defs ${CD_BUILDCHROOT}/etc || die --#cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/functions.sh ${CD_BUILDCHROOT}/sbin || die - cat ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/splash.sh >> ${CD_BUILDCHROOT}/sbin/functions.sh || die -- - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/local ${CD_BUILDCHROOT}/etc/init.d || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fstab ${CD_BUILDCHROOT}/etc || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/net-setup ${CD_BUILDCHROOT}/usr/sbin || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/profile ${CD_BUILDCHROOT}/etc || die --#cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/net ${CD_BUILDCHROOT}/etc/conf.d || die -+cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/net ${CD_BUILDCHROOT}/etc/conf.d || die - mv ${CD_BUILDCHROOT}/sbin/splash ${CD_BUILDCHROOT}/sbin/splash.bin || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/splash ${CD_BUILDCHROOT}/sbin/ || die --#cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/rc ${CD_BUILDCHROOT}/sbin/ || die -+cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/rc ${CD_BUILDCHROOT}/sbin/ || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fbtruetype.static ${CD_BUILDCHROOT}/sbin/ || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fbtruetype.static ${CD_BUILDCHROOT}/sbin/fbtruetype || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fbresolution ${CD_BUILDCHROOT}/sbin || die - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/splash.bin ${CD_BUILDCHROOT}/sbin || die --cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/gentoo_default_blue.jpg ${CD_BUILDCHROOT}/usr/kde/3.1/share/wallpapers || die --mv ${CD_BUILDCHROOT}/usr/kde/3.1/share/config ${CD_BUILDCHROOT}/etc || die --ln -s /etc/config ${CD_BUILDCHROOT}/usr/kde/3.1/share/config || die -+cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/bg.png ${CD_BUILDCHROOT}/usr/share/commonbox/backgrounds || die -+cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/menu.blackbox ${CD_BUILDCHROOT}/usr/share/commonbox/menu || die -+cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/bootsplash-1024x768.cfg ${CD_BUILDCHROOT}/etc/bootsplash/gentoo/config || die - rm -f ${CD_BUILDCHROOT}/usr/share/hwdata/pci.ids - rm -f ${CD_BUILDCHROOT}/usr/share/hwdata/usb.ids - ln -s /usr/share/misc/pci.ids ${CD_BUILDCHROOT}/usr/share/hwdata/pci.ids - ln -s /usr/share/misc/usb.ids ${CD_BUILDCHROOT}/usr/share/hwdata/usb.ids - install -d ${CD_BUILDCHROOT}/usr/share/fonts || die --ln -s /usr/X11R6/lib/X11/fonts/{TTF,100dpi,75dpi,PEX,Speedo,Type1,truetype,encodings} ${CD_BUILDCHROOT}/usr/share/fonts || die -+#ln -s /usr/X11R6/lib/X11/fonts/{TTF,100dpi,75dpi,PEX,Speedo,Type1,truetype,encodings} ${CD_BUILDCHROOT}/usr/share/fonts || die - rm -f ${CD_BUILDCHROOT}/lib/evms/libe2fsim.1.2.1.so - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/install.txt ${CD_BUILDCHROOT}/ || die - echo usbcore >> ${CD_BUILDCHROOT}/etc/hotplug/blacklist -@@ -69,11 +69,9 @@ - rc-update del keymaps - rc-update del consolefont - rc-update add metalog default --rc-update add distccd default - #rc-update add aumix default - fc-cache --force --#/etc/init.d/xfs start --#/etc/init.d/xfs stop -+update-modules - modules-update - #OK, we can't run env-update on the CD itself (likely no python) - #so we will tweak opengl stuff here... -@@ -81,6 +79,8 @@ - env-update - cp /etc/ld.so.conf /etc/ld.so.conf.orig - rm /usr/sbin/env-update -+cd /usr/bin -+ln -s ../../enemy-territory/et et - EOF - chmod +x $CD_BUILDTEMP/chroot-clean - chroot $CD_BUILDCHROOT /tmp/livecd/chroot-clean diff --git a/src/livecd/profiles/rtcw-et/md b/src/livecd/profiles/rtcw-et/md deleted file mode 100644 index 398c0004e4..0000000000 --- a/src/livecd/profiles/rtcw-et/md +++ /dev/null @@ -1,73 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/rtcw-et/Attic/md,v 1.1 2003/10/19 03:46:50 livewire Exp $ - -HILITE="\033[1m" -NORMAL="\033[0m" - -RAID="yes" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "noraid" ] - then - RAID="no" - fi -done - -depend() { - after checkfs - after * -} - -blurb() { - echo -ne ${HILITE}${1} - #blurblen=${#1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} -start() { - ebegin "Raid Setup" - -if [ "$RAID" = "yes" ] - then - ebegin "Auto-detecting EVMS modules" - # Disable kernel messages to console: - echo "0" > /proc/sys/kernel/printk - local x - for x in /lib/modules/*/kernel/drivers/evms/* - do - y=${x##*/} - y=${y%%.*} - echo -ne " ${GOOD}*${NORMAL} Scanning for ${y}..." - insmod -f ${x} > /dev/null 2>&1 - backup - done - fi - -if [ "$RAID" = "yes" ] - then - ebegin "Auto-detecting MD modules" - # Disable kernel messages to console: - echo "0" > /proc/sys/kernel/printk - local x - for x in /lib/modules/*/kernel/drivers/md/* - do - y=${x##*/} - y=${y%%.*} - echo -ne " ${GOOD}*${NORMAL} Scanning for ${y}..." - insmod -f ${x} > /dev/null 2>&1 - backup - done - fi - -} - -stop() { - return -} - -# vim:ts=4 diff --git a/src/livecd/profiles/rtcw-et/motd b/src/livecd/profiles/rtcw-et/motd deleted file mode 100644 index cce52da831..0000000000 --- a/src/livecd/profiles/rtcw-et/motd +++ /dev/null @@ -1,4 +0,0 @@ -Welcome to the Gentoo Linux LiveCD! -Build: 19 Mar 2003, i686 optimizations - -type "x-setup" to (re)start ut2003. diff --git a/src/livecd/profiles/rtcw-et/net-setup b/src/livecd/profiles/rtcw-et/net-setup deleted file mode 100644 index b74ed027be..0000000000 --- a/src/livecd/profiles/rtcw-et/net-setup +++ /dev/null @@ -1,32 +0,0 @@ -#!/bin/bash -[ "$1" = "" ] && echo "net-setup: please specify a network interface" && exit 1 -[ ! -d /tmp/setup.opts ] && mkdir /tmp/setup.opts -cd /tmp/setup.opts -dialog --title "Network Setup" --menu "Time to set up the $1 interface! You can use DHCP to automatically configure a network interface or you can specify an IP and related settings manually. Choose one option:" 20 60 7 0 "Use DHCP to auto-detect my network settings" 1 "Specify an IP address manually" 2> ${1}.1 -mynetsel=`cat ${1}.1` -case $mynetsel in -0) - /sbin/dhcpcd -t 10 ${1} - ;; -1) - dialog --title "IP address" --inputbox "Please enter an IP address for $1:" 20 50 "192.168.1.1" 2> ${1}.IP - dialog --title "Broadcast address" --inputbox "Please enter a Broadcast address for $1:" 20 50 "192.168.1.255" 2> ${1}.B - dialog --title "Network mask" --inputbox "Please enter a Network Mask for $1:" 20 50 "255.255.255.0" 2> ${1}.NM - dialog --title "Gateway" --inputbox "Please enter a Gateway for $1 (hit enter for none:)" 20 50 2> ${1}.GW - dialog --title "DNS server" --inputbox "Please enter a name server to use (hit enter for none:)" 20 50 2> ${1}.NS - /sbin/ifconfig $1 `cat ${1}.IP` broadcast `cat ${1}.B` netmask `cat ${1}.NM` - myroute=`cat ${1}.GW` - if [ "$myroute" != "" ] - then - /sbin/route add default gw $myroute dev $1 netmask 0.0.0.0 metric 1 - fi - myns="`cat ${1}.NS`" - if [ "$myns" = "" ] - then - : > /etc/resolv.conf - else - echo "nameserver $myns" > /etc/resolv.conf - fi - ;; -esac -echo "Type \"ifconfig\" to make sure the interface was configured correctly." diff --git a/src/livecd/profiles/rtcw-et/opengl-update b/src/livecd/profiles/rtcw-et/opengl-update deleted file mode 100644 index cb15f00029..0000000000 --- a/src/livecd/profiles/rtcw-et/opengl-update +++ /dev/null @@ -1,95 +0,0 @@ -#!/bin/bash -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# Author: Martin Schlemmer <azarah@gentoo.org> -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/rtcw-et/Attic/opengl-update,v 1.1 2003/10/19 03:46:50 livewire Exp $ - - -source /etc/init.d/functions.sh - -if [ `id -u` -ne 0 ] -then - eerror "${0}: must be root." - exit 1 -fi - -usage() { -cat << FOO -usage: opengl-update <GL implementation> - -note: - This utility switch between OpenGL implementations. Currently there - are two supported implementations, namely "xfree" and "nvidia", the - implementations for XFree86 and the NVidia drivers respectively. - -examples: - opengl-update xfree - This will setup things to use libGL.so from XFree86 - - opengl-update nvidia - This will setup things to use libGL.so from the NVidia drivers. - -FOO - exit 1 -} - -if [ "$#" -ne 1 ] -then - usage -fi -if [ ! -d /usr/lib/opengl/${1} ] -then - usage -else - ebegin "Switching to ${1} OpenGL interface" - - #set up the $LDPATH - echo "LDPATH=/usr/lib/opengl/${1}/lib" >/etc/env.d/09opengl - /usr/sbin/env-update &>/dev/null - - #setup the /usr/lib/libGL.so symlink - rm -f /etc/opengl/libGL.so /etc/opengl/libGL.so.1 - - realname="$(readlink /usr/lib/opengl/${1}/lib/libGL.so)" - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libGL.so - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libGL.so.1 - - #setup the /usr/X11R6/lib/libMesaGL.so symlink - rm -f /etc/opengl/libMesaGL.so - realname="$(readlink /usr/lib/opengl/${1}/lib/libGL.so)" - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libMesaGL.so - - rm -f /etc/opengl/libGLcore.so* - - if [ -e /usr/lib/opengl/${1}/lib/libGLcore.so ] - then - realname="$(readlink /usr/lib/opengl/${1}/lib/libGLcore.so)" - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libGLcore.so - ln -sf /usr/lib/opengl/${1}/lib/${realname} \ - /etc/opengl/libGLcore.so.1 - fi - - #setup the /usr/X11R6/lib/modules/extensions/libglx.so symlink - rm -f /etc/opengl/libglx.* - - if [ -e /usr/lib/opengl/${1}/extensions/libglx.so ] - then - ln -sf /usr/lib/opengl/${1}/extensions/libglx.so \ - /etc/opengl/libglx.so - fi - #setup the /usr/X11R6/lib/modules/extensions/libglx.a symlink - if [ -e /usr/lib/opengl/${1}/extensions/libglx.a ] - then - ln -sf /usr/lib/opengl/${1}/extensions/libglx.a \ - /etc/opengl/libglx.a - fi - - eend 0 -fi - - -# vim:ts=4 diff --git a/src/livecd/profiles/rtcw-et/openglify b/src/livecd/profiles/rtcw-et/openglify deleted file mode 100644 index 5b31383f42..0000000000 --- a/src/livecd/profiles/rtcw-et/openglify +++ /dev/null @@ -1,29 +0,0 @@ -#!/bin/bash -#This script is designed to tweak the system for CD-based opengl-update -#set up our flexible opengl stuff: - -#if [ ! -e ${CD_BUILDCHROOT}/etc/opengl ] -#then - cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/opengl-update ${CD_BUILDCHROOT}/usr/sbin - #move symlinks to a malleable /etc/opengl directory. - install -d ${CD_BUILDCHROOT}/etc/opengl - mv ${CD_BUILDCHROOT}/usr/lib/libGL.* ${CDROOT}/etc/opengl/ - mv ${CD_BUILDCHROOT}/usr/lib/libGLcore.* ${CDROOT}/etc/opengl/ - ln -sf /etc/opengl/libGL.so ${CD_BUILDCHROOT}/usr/lib/libGL.so - ln -sf /etc/opengl/libGL.so.1 ${CD_BUILDCHROOT}/usr/lib/libGL.so.1 - ln -sf /etc/opengl/libGLcore.so ${CD_BUILDCHROOT}/usr/lib/libGLcore.so - ln -sf /etc/opengl/libGLcore.so.1 ${CD_BUILDCHROOT}/usr/lib/libGLcore.so.1 - mv ${CD_BUILDCHROOT}/usr/X11R6/lib/libMesaGL.so ${CDROOT}/etc/opengl/ - ln -sf /etc/opengl/libMesaGL.so ${CD_BUILDCHROOT}/usr/X11R6/lib/libMesaGL.so - for x in libglx.a libglx.so - do - if [ -e ${CD_BUILDCHROOT}/usr/X11R6/lib/modules/extensions/${x} -o -L \ - ${CD_BUILDCHROOT}/usr/X11R6/lib/modules/extensions/${x} ] - then - mv ${CD_BUILDCHROOT}/usr/X11R6/lib/modules/extensions/${x} ${CDROOT}/etc/opengl/ - fi - ln -s /etc/opengl/${x} \ - ${CD_BUILDCHROOT}/usr/X11R6/lib/modules/extensions/${x} - done -#fi - diff --git a/src/livecd/profiles/rtcw-et/post-clean b/src/livecd/profiles/rtcw-et/post-clean deleted file mode 100644 index 57ec16013a..0000000000 --- a/src/livecd/profiles/rtcw-et/post-clean +++ /dev/null @@ -1,8 +0,0 @@ -#!/bin/bash -install -m0755 ${LIVECD_ROOT}/profiles/${CD_PROFILE}/x-setup ${CD_BUILDCHROOT}/usr/sbin/x-setup -install -m0755 ${LIVECD_ROOT}/profiles/${CD_PROFILE}/xinitrc ${CD_BUILDCHROOT}/root/.xinitrc -install -m0644 ${LIVECD_ROOT}/profiles/${CD_PROFILE}/XF86Config.* ${CD_BUILDCHROOT}/etc/X11/ -tar -zxvf ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/${GAME_TAR} -C ${CD_BUILDCHROOT}/ || die -tar -jxvf ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/root.tar.bz2 -C ${CD_BUILDCHROOT}/ || die -tar -jxvf ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fluxbox.tar.bz2 -C ${CD_BUILDCHROOT}/root || die - diff --git a/src/livecd/profiles/rtcw-et/pre-clean b/src/livecd/profiles/rtcw-et/pre-clean deleted file mode 100644 index 55763128f7..0000000000 --- a/src/livecd/profiles/rtcw-et/pre-clean +++ /dev/null @@ -1,97 +0,0 @@ -#!/bin/bash -echo "$CD_HOSTNAME" > ${CD_BUILDCHROOT}/etc/hostname || die -#modprobe has a bug and auto-adds a "above hid keybdev mousedev" line to it's internel configuration. -#this fixes it.... -echo "above hid" > ${CD_BUILDCHROOT}/etc/modules.d/hidfix -#rm ${CD_BUILDCHROOT}/etc/init.d/iptables -#install -d ${CD_BUILDCHROOT}/var/state/init.d || die -#install -d ${CD_BUILDCHROOT}/root/.armyops || die -#install -d ${CD_BUILDCHROOT}/root/.armyops/System || die -#cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/armyops/System/*.ini ${CD_BUILDCHROOT}/root/.armyops/System || die -cp ${CD_BUILDCHROOT}/etc/init.d/net.eth0 ${CD_BUILDCHROOT}/etc/init.d/net.eth1 -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/bash_profile ${CD_BUILDCHROOT}/root/.bash_profile || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/modules ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/checkroot ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/md ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/hotplug ${CD_BUILDCHROOT}/etc/init.d || die -#cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/aumix ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/checkfs ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/mingetty ${CD_BUILDCHROOT}/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/autoconfig ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/usleep ${CD_BUILDCHROOT}/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/login.defs ${CD_BUILDCHROOT}/etc || die -cat ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/splash.sh >> ${CD_BUILDCHROOT}/sbin/functions.sh || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/local ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fstab ${CD_BUILDCHROOT}/etc || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/net-setup ${CD_BUILDCHROOT}/usr/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/profile ${CD_BUILDCHROOT}/etc || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/net ${CD_BUILDCHROOT}/etc/conf.d || die -mv ${CD_BUILDCHROOT}/sbin/splash ${CD_BUILDCHROOT}/sbin/splash.bin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/splash ${CD_BUILDCHROOT}/sbin/ || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/rc ${CD_BUILDCHROOT}/sbin/ || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fbtruetype.static ${CD_BUILDCHROOT}/sbin/ || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fbtruetype.static ${CD_BUILDCHROOT}/sbin/fbtruetype || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fbresolution ${CD_BUILDCHROOT}/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/splash.bin ${CD_BUILDCHROOT}/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/bg.png ${CD_BUILDCHROOT}/usr/share/commonbox/backgrounds || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/menu.blackbox ${CD_BUILDCHROOT}/usr/share/commonbox/menu || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/bootsplash-1024x768.cfg ${CD_BUILDCHROOT}/etc/bootsplash/gentoo/config || die -rm -f ${CD_BUILDCHROOT}/usr/share/hwdata/pci.ids -rm -f ${CD_BUILDCHROOT}/usr/share/hwdata/usb.ids -ln -s /usr/share/misc/pci.ids ${CD_BUILDCHROOT}/usr/share/hwdata/pci.ids -ln -s /usr/share/misc/usb.ids ${CD_BUILDCHROOT}/usr/share/hwdata/usb.ids -install -d ${CD_BUILDCHROOT}/usr/share/fonts || die -#ln -s /usr/X11R6/lib/X11/fonts/{TTF,100dpi,75dpi,PEX,Speedo,Type1,truetype,encodings} ${CD_BUILDCHROOT}/usr/share/fonts || die -rm -f ${CD_BUILDCHROOT}/lib/evms/libe2fsim.1.2.1.so -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/install.txt ${CD_BUILDCHROOT}/ || die -echo usbcore >> ${CD_BUILDCHROOT}/etc/hotplug/blacklist -chmod +x ${CD_BUILDCHROOT}/usr/sbin/net-setup || die -mymotd=${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/motd -[ -e $mymotd ] && cp $mymotd ${CD_BUILDCHROOT}/etc -echo "CDBOOT=1" >> ${CD_BUILDCHROOT}/etc/rc.conf || die -echo "svcdir=/var/state/init.d" >> ${CD_BUILDCHROOT}/etc/conf.d/rc || die -echo "127.0.0.1 cdimage localhost" > ${CD_BUILDCHROOT}/etc/hosts || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/inittab ${CD_BUILDCHROOT}/etc || die -mount_all -cat > $CD_BUILDTEMP/chroot-clean << EOF -#!/bin/bash -source /etc/profile -#do our hid fix... -modules-update -cd /usr/src/linux -#produce correct module dependency information -make _modinst_post -rc-update del iptables default -rc-update del netmount default -rc-update add autoconfig default -#rc-update add md default -#remove standard keymap support: -rc-update del keymaps -rc-update del consolefont -rc-update add metalog default -#rc-update add aumix default -fc-cache --force -update-modules -modules-update -#OK, we can't run env-update on the CD itself (likely no python) -#so we will tweak opengl stuff here... -rm /etc/env.d/09opengl -env-update -cp /etc/ld.so.conf /etc/ld.so.conf.orig -rm /usr/sbin/env-update -cd /usr/bin -ln -s ../../enemy-territory/et et -EOF -chmod +x $CD_BUILDTEMP/chroot-clean -chroot $CD_BUILDCHROOT /tmp/livecd/chroot-clean -[ $? -ne 0 ] && chroot_die "chroot-clean failure" -umount_all -rm -rf ${CD_BUILDCHROOT}/etc/localtime -cp ${CD_BUILDCHROOT}/usr/share/zoneinfo/GMT ${CD_BUILDCHROOT}/etc/localtime || die - -if [ -e "${LIVECD_ROOT}/profiles/${CD_PROFILE}/openglify" ] -then - source ${LIVECD_ROOT}/profiles/${CD_PROFILE}/openglify -fi -find ${CD_BUILDCHROOT}/lib/modules -name modules.dep |xargs touch - diff --git a/src/livecd/profiles/rtcw-et/settings b/src/livecd/profiles/rtcw-et/settings deleted file mode 100644 index e468025c61..0000000000 --- a/src/livecd/profiles/rtcw-et/settings +++ /dev/null @@ -1,39 +0,0 @@ -source ${LIVECD_ROOT}/profiles/global/settings -LOOP_MODE=cloop -CD_BUILDROOT=${CD_TEMPROOT}/${CD_PROFILE} -CD_PORTAGE_PROFILE="default-x86-1.4" -CD_USE="-gnome acpi4linux crypt ipv6 -doc -slang X gtk -arts -svga -directfb -ggi -esd -nas \ --perl -python truetype" -#CD_CFLAGS="-O3 -mcpu=i686 -freorder-blocks -fprefetch-loop-arrays -pipe" -CD_CFLAGS="-march=pentium3 -mno-sse -O3 -pipe -finline-functions -fdelete-null-pointer-checks \ --fprefetch-loop-arrays -foptimize-sibling-calls -funroll-loops -frerun-loop-opt \ --frename-registers -fmove-all-movables -freorder-blocks" -CD_CXXFLAGS="${CD_CFLAGS}" -CD_STAGETARBALL=ftp://ftp.twobit.net/pub/stage3-pentium3-1.4_pre20030308.tar.bz2 -#CD_STAGETARBALL=http://distro.ibiblio.org/pub/Linux/distributions/gentoo/experimental/x86/stages/stage3-x86-1.4_pre20030214.tar.bz2 -#modules to auto-detect/copy to the initrd (put in the "/modules/storage" directory) -#aic7xxx_old removed from position after aic7xxx in attempt to fix bugs #12185 and #11278 -STORAGE_MODULES="aic7xxx aic7xxx_old BusLogic \ -ncr53c8xx NCR53c406a \ -initio advansys aha1740 aha1542 aha152x \ -atp870u dtc eata fdomain gdth \ -megaraid pas16 pci2220i pci2000 psi240i \ -qlogicfas qlogicfc qlogicisp \ -seagate t128 tmscsim u14-34f ultrastor wd7000 \ -a100u2w 3w-xxxx DAC960 NCR53c406a \ -aacraid sym53c8xx a100u2w cpqfc \ -dmx3191d dpt_i2o imm in2000 ips qla1280 \ -sim710 sym53c416" -FIREWIRE_MODULES="ieee1394 ohci1394 eth1394 sbp2" -ATARAID_MODULES="ataraid pdcraid hptraid" -PCMCIA_MODULES="ide-cs" -USB_MODULES="usbcore ehci-hcd uhci usb-ohci hid usb-storage" -LOOP_SIZE="530000" -KERNCONFIG=gaming-config2 -CD_HOSTNAME="cdimage" -CD_PORTDIR="/usr/portage" -CD_ISONAME="gentoo.iso" -ARCH=x86 -###requires 1280.initrd , 1024.initrd, 800.initrd bootsplash initrds in aux-files -BOOTSPLASH=yes -GAME_TAR=et-1.0.tar.gz diff --git a/src/livecd/profiles/rtcw-et/stage1-experimental b/src/livecd/profiles/rtcw-et/stage1-experimental deleted file mode 100644 index 387448a128..0000000000 --- a/src/livecd/profiles/rtcw-et/stage1-experimental +++ /dev/null @@ -1,15 +0,0 @@ -=sys-kernel/gaming-sources-2.4.20-r3 -xfree -#aumix depends on xfree, so it needs to be here -aumix -iputils -kudzu -hwdata-knoppix -hwsetup -bootsplash ->=sys-apps/baselayout-1.8.6 -x11-libs/qt -xloadimage -giflib -fluxbox -=x11-misc/urw-fonts-2.0-r1 diff --git a/src/livecd/profiles/rtcw-et/stage1-packages b/src/livecd/profiles/rtcw-et/stage1-packages deleted file mode 100644 index d4432839cc..0000000000 --- a/src/livecd/profiles/rtcw-et/stage1-packages +++ /dev/null @@ -1,18 +0,0 @@ -metalog -sys-apps/pciutils -#net-www/lynx -sys-apps/e2fsprogs -sys-apps/reiserfs-utils -sys-apps/hdparm -app-editors/nano -sys-apps/less -net-misc/openssh -net-misc/dhcpcd -mingetty -pwgen -hotplug -dietlibc -popt -dialog -=sys-apps/modutils-2.4.25 -x11-libs/qt diff --git a/src/livecd/profiles/rtcw-et/stage2-experimental b/src/livecd/profiles/rtcw-et/stage2-experimental deleted file mode 100644 index aab91526b3..0000000000 --- a/src/livecd/profiles/rtcw-et/stage2-experimental +++ /dev/null @@ -1,3 +0,0 @@ -nvidia-kernel -nvidia-glx -ati-drivers diff --git a/src/livecd/profiles/rtcw-et/stage2-packages b/src/livecd/profiles/rtcw-et/stage2-packages deleted file mode 100644 index b634c4cb16..0000000000 --- a/src/livecd/profiles/rtcw-et/stage2-packages +++ /dev/null @@ -1,6 +0,0 @@ -net-wireless/wireless-tools -sys-apps/iproute -sys-apps/pcmcia-cs -net-misc/nforce-net -linux-wlan-ng -emu10k1 diff --git a/src/livecd/profiles/rtcw-et/x-setup b/src/livecd/profiles/rtcw-et/x-setup deleted file mode 100644 index 1c152b5829..0000000000 --- a/src/livecd/profiles/rtcw-et/x-setup +++ /dev/null @@ -1,79 +0,0 @@ -#!/bin/bash -#first, get paths right if we're getting started b4 login -source /etc/profile - -echo "0" > /proc/sys/kernel/printk -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "agpgart" ] - then - modprobe agpgart > /dev/null 2>&1 - fi -done - -GLTYPE=nvidia -#now, for the key component :) -modprobe nvidia > /dev/null 2>&1 -if [ "`lsmod | cut -f1 -d\" \" | grep ^nvidia$`" = "nvidia" ] -then - echo "NVIDIA driver loaded." -else - modprobe fglrx > /dev/null 2>&1 - if [ "`lsmod | cut -f1 -d\" \" | grep ^fglrx$`" = "fglrx" ] - then - echo "ATI driver loaded." - GLTYPE=ati - else - echo "**********************************************************" - echo "NVIDIA or ATI drivers unable to load; aborting." - echo "This game requires modern NVIDIA or ATI graphics hardware." - echo "**********************************************************" - echo "" - if [ -e /proc/splash ] - then - echo "*******************************" - echo "Entering Vesa browser-only mode" - echo "*******************************" - sleep 3 - GLTYPE=xfree - fi - fi - -fi -opengl-update $GLTYPE - -if [ ! -e /etc/sysconfig/mouse ] -then - echo "A mouse could not be detected; aborting." - echo "Please make sure a mouse is attached to your system." - exit 1 -fi -source /etc/sysconfig/mouse - -VERTREFRESH=`ddcxinfo -vsync` - -if [ "$VERTREFRESH" = "0-0" ] -then - echo "No DDC information detected; assuming reasonable defaults." - VERTREFRESH=50-80 - HORIZSYNC=30-70 -else - HORIZSYNC=`ddcxinfo -hsync` -fi - -sed -e "s:##MOUSEPROTO##:${XMOUSETYPE}:" \ - -e "s:##MOUSEDEV##:${DEVICE}:" \ - -e "s:##VERTREFRESH##:${VERTREFRESH}:" \ - -e "s:##HORIZSYNC##:${HORIZSYNC}:" \ -/etc/X11/XF86Config.${GLTYPE} > /etc/X11/XF86Config - -#Now, we need to export LD_PATH since env-update can't do this for us (no python, -#/etc/env.d/09opengl removed... - -cp /etc/ld.so.conf.orig /etc/ld.so.conf -echo /usr/lib/opengl/${GLTYPE}/lib >> /etc/ld.so.conf -ldconfig -#time to fire up X -exec /usr/X11R6/bin/xinit - diff --git a/src/livecd/profiles/rtcw-et/xfs-config b/src/livecd/profiles/rtcw-et/xfs-config deleted file mode 100644 index a6bd191872..0000000000 --- a/src/livecd/profiles/rtcw-et/xfs-config +++ /dev/null @@ -1,1314 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -# CONFIG_M68631 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_1GB is not set -CONFIG_2GB=y -# CONFIG_3GB is not set -# CONFIG_05GB is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -CONFIG_CARDBUS=y -CONFIG_TCIC=y -CONFIG_I82092=y -CONFIG_I82365=y - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -CONFIG_EVMS_GPT_SEGMENT_MGR=m -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -CONFIG_EVMS_OS2=m -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -# CONFIG_CRYPTO is not set -# CONFIG_CIPHERS is not set -# CONFIG_DIGESTS is not set -# CONFIG_CRYPTODEV is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_IPSEC is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -CONFIG_IDE_TASK_IOCTL=y -# CONFIG_IDE_TASKFILE_IO is not set -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_AEC62XX_TUNING is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_CMD680 is not set -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -# CONFIG_PIIX_TUNING is not set -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -# CONFIG_PDC202XX_BURST is not set -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_BUILD_FIRMWARE is not set -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -CONFIG_SCSI_SYM53C8XX=m -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC395x_TRMS1040=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -CONFIG_SCSI_PCMCIA=y -CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_FDOMAIN=m -CONFIG_PCMCIA_NINJA_SCSI=m -CONFIG_PCMCIA_QLOGIC=m - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -CONFIG_PCMCIA_IBMTR=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_AIRONET4500_CS=m - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set - -# -# ISDN feature submodules -# -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DIVERSION is not set - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_ECC is not set -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set - -# -# PCMCIA character devices -# -CONFIG_PCMCIA_SERIAL_CS=m -CONFIG_SYNCLINK_CS=m -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_PROC_CONFIG=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_DMAPI is not set -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -# CONFIG_IMON is not set - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VIDEO_SELECT is not set -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_UHCI=y -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=y -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -# CONFIG_USB_USBDNET is not set -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -# CONFIG_USB_LCD is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Windows Applications support -# -# CONFIG_MKI is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/rtcw-et/xinitrc b/src/livecd/profiles/rtcw-et/xinitrc deleted file mode 100644 index 7e3dfcc018..0000000000 --- a/src/livecd/profiles/rtcw-et/xinitrc +++ /dev/null @@ -1,42 +0,0 @@ -#!/bin/bash -xsetroot -solid black -#this xinitrc uses xrandr to detect the current resolution, and then sets the appropriate -#ut2003-demo resolution. -REALX=`xrandr | grep "^\*" | awk '{ print $2 }'` -REALY=`xrandr | grep "^\*" | awk '{ print $4 }'` -OK=0 -for NEWRES in 1600x1200 1280x1024 1280x960 1024x768 800x600 640x480 512x384 320x200 -do - - NEWX=${NEWRES%%x*} - NEWY=${NEWRES##*x} - echo $NEWRES - if [ $NEWX -gt $REALX ] - then - #the NEWX is higher than our current Y res; continue.... - continue - fi - echo REALY $REALY - echo NEWY $NEWY - if [ $REALY -lt $NEWY ] - then - #our current Y res is less than our NEWY; continue... - continue - fi - #if we've gotten here, we want to use NEWXxNEWY as our aa resolution - OK=1 - break - - -done -if [ "$OK" = "0" ] -then - echo ".xinitrc: couldn't identify proper game resolution; exiting." - exit 1 -fi - -#test -f /proc/splash && echo "show 65535" > /proc/splash -#bsetbg /usr/share/commonbox/backgrounds/gentoo.jpg -exec /usr/sbin/gamelaunch & -#blackbox -fluxbox diff --git a/src/livecd/profiles/ut2003-demo/ChangeLog b/src/livecd/profiles/ut2003-demo/ChangeLog deleted file mode 100644 index 65cb02891e..0000000000 --- a/src/livecd/profiles/ut2003-demo/ChangeLog +++ /dev/null @@ -1,35 +0,0 @@ -# ChangeLog for ut2k3-CD -# Copyright 2002 Gentoo Technologies, Inc.; Distributed under the GPL -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/ut2003-demo/Attic/ChangeLog,v 1.1 2003/10/19 03:46:50 livewire Exp $ - - 23 Sep 2002; Daniel Robbins <drobbins@gentoo.org>: net-setup fixed to - eliminate cosmetic error when dhcpcd is used. - -*livecd-ut2003-i586-1.4.1.iso (20 Sep 2002) - - 20 Sep 2002; Daniel Robbins <drobbins@gentoo.org>: rebuilt with "-march=i586 - -mcpu=i686 -O3" for Pentium Classic and greater compatibility, scheduling - optimized for P6-class systems. - - 19 Sep 2002; Daniel Robbins <drobbins@gentoo.org>: /etc/resolv.conf fix-up - so that hitting enter for none really "works". - - 19 Sep 2002; Daniel Robbins <drobbins@gentoo.org>: Add an option to manually - specify monitor sync information if the monitor doesn't support EDID. - - 19 Sep 2002; Daniel Robbins <drobbins@gentoo.org>: ut2k3 now comes from an - ebuild rather than from my personal /root directory. Now including the - patchset to bring the demo up to a "19 Sep" patch-level. Benchmarking not - yet working from CD. - - 19 Sep 2002; Daniel Robbins <drobbins@gentoo.org>: Option added to allow - machines with >=512MB RAM to copy the entire game to tmpfs (/root) for - near-zero load-times. - - 19 Sep 2002; Daniel Robbins <drobbins@gentoo.org>: PCI ID (1102:0002) for - SoundBlaster PCI 512 added to the list of emu10k1-based cards. - -*livecd-ut2003-x86-1.4_rc1-r1.iso (16 Sep 2002) - - 16 Sep 2002; Daniel Robbins <drobbins@gentoo.org>: Initial release containing - initial ut2k3-demo. diff --git a/src/livecd/profiles/ut2003-demo/aux-files/XF86Config b/src/livecd/profiles/ut2003-demo/aux-files/XF86Config deleted file mode 100644 index 3a492a9f8f..0000000000 --- a/src/livecd/profiles/ut2003-demo/aux-files/XF86Config +++ /dev/null @@ -1,110 +0,0 @@ -Section "ServerLayout" - Identifier "XFree86 Configured" - Screen 0 "Screen0" 0 0 - InputDevice "Mouse0" "CorePointer" - InputDevice "Keyboard0" "CoreKeyboard" -EndSection - -Section "Files" - RgbPath "/usr/X11R6/lib/X11/rgb" - ModulePath "/usr/X11R6/lib/modules" - FontPath "/usr/X11R6/lib/X11/fonts/misc/" - FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" - FontPath "/usr/X11R6/lib/X11/fonts/Type1/" - FontPath "/usr/X11R6/lib/X11/fonts/CID/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" -EndSection - -Section "Module" - Load "dbe" - Load "dri" - Load "extmod" - Load "glx" - Load "pex5" - Load "record" - Load "xie" - Load "xtrap" - Load "speedo" - Load "type1" -EndSection - -Section "InputDevice" - Identifier "Keyboard0" - Driver "keyboard" -EndSection - -Section "InputDevice" - Identifier "Mouse0" - Driver "mouse" - Option "Protocol" "PS/2" - Option "Device" "/dev/mouse" -EndSection - -Section "Monitor" - Identifier "Monitor0" - VendorName "Monitor Vendor" - ModelName "Monitor Model" -EndSection - -Section "Device" - ### Available Driver options are:- - ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", - ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" - ### [arg]: arg optional - #Option "DigitalVibrance" # <i> - #Option "PageFlip" # [<bool>] - #Option "Dac8Bit" # [<bool>] - #Option "NoLogo" # [<bool>] - #Option "Overlay" # [<bool>] - #Option "UBB" # [<bool>] - #Option "Stereo" # [<bool>] - #Option "BlueLine" # [<bool>] - #Option "WindowFlip" # [<bool>] - #Option "SWcursor" # [<bool>] - #Option "HWcursor" # [<bool>] - #Option "VideoKey" # <i> - #Option "NvAGP" # <i> - #Option "PixmapCacheLines" # <i> - #Option "IgnoreEDID" # [<bool>] - #Option "NoDDC" # [<bool>] - #Option "ConnectedMonitor" # <str> - #Option "ConnectedMonitors" # <str> - #Option "TVStandard" # <str> - #Option "TVOutFormat" # <str> - #Option "NoRenderAccel" # [<bool>] - Option "CursorShadow" "1" # [<bool>] - #Option "CursorShadowAlpha" # <i> - #Option "CursorShadowXOffset" # <i> - #Option "CursorShadowYOffset" # <i> - #Option "UseEdidFreqs" # [<bool>] - #Option "FlatPanelProperties" # <str> - #Option "TwinView" # [<bool>] - #Option "TwinViewOrientation" # <str> - #Option "SecondMonitorHorizSync" # <str> - #Option "SecondMonitorVertRefresh" # <str> - #Option "MetaModes" # <str> - #Option "UseInt10Module" # [<bool>] - #Option "SwapReady" # [<bool>] - #Option "NoTwinViewXineramaInfo" # [<bool>] - #Option "NoRenderExtension" # [<bool>] - Identifier "Card0" - Driver "nvidia" - VendorName "NVidia" - Option NvAgp "##NVAGPMODE##" - BoardName "GeForce2 MX/MX 400" - BusID "PCI:1:0:0" -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Card0" - Monitor "Monitor0" - DefaultColorDepth "##DEPTH##" - SubSection "Display" - Modes "##RESOLUTION##" - Depth "##DEPTH##" - ViewPort 0 0 - EndSubSection -EndSection - diff --git a/src/livecd/profiles/ut2003-demo/aux-files/cdinfo b/src/livecd/profiles/ut2003-demo/aux-files/cdinfo deleted file mode 100644 index fb2c43993a..0000000000 --- a/src/livecd/profiles/ut2003-demo/aux-files/cdinfo +++ /dev/null @@ -1,38 +0,0 @@ -Welcome to the Gentoo Linux 1.4.1 "live" install/UT2003-demo CD :) - -Here's a list of commands you can use to help get your system -configured to play Unreal Tournament 2003, or do other things: - -Type "net-setup eth0" (for example) to configure the eth0 -interface. Note that support for all network cards has been built -directly into the kernel. - -Type "pci-setup" to detect and auto-enable drivers for common PCI -cards. ("pci-setup" will only load sound modules for SoundBlaster -Live!, Audigy and a few other cards; you may need to "modprobe" -your sound card module manually.) The "aumix" audio mixer is -available for adjusting volume. - -Type "x-setup" to launch an accelerated NVIDIA X session. After -configuration completes, X (with openbox as the window manager) -will start. To launch the Unreal Tournament 2003 demo, right-click -on the background to pop up the openbox menu and select the first -option. - -And you can view the license for the Unreal Tournament 2003 Demo -by typing "less /ut2k3-demo-LICENSE". - -Other commands on this CD include: irrsi (irc client), ssh, scp, -lynx (text Web browser) and a host of system utilities. The "nano" -and "vi" (nvi) editors are available. - -Oh -- and if you want to install Gentoo Linux 1.4_rc1, you can -view the install docs by typing "less /install.txt", or by typing -"lynx http://www.gentoo.org/doc/build.html" if you have networking -configured. - -Enjoy! - -The Gentoo Linux development team -http://www.gentoo.org - diff --git a/src/livecd/profiles/ut2003-demo/aux-files/dot-openbox/menu b/src/livecd/profiles/ut2003-demo/aux-files/dot-openbox/menu deleted file mode 100644 index 86de08a0cd..0000000000 --- a/src/livecd/profiles/ut2003-demo/aux-files/dot-openbox/menu +++ /dev/null @@ -1,63 +0,0 @@ -[begin] (Box) - [exec] (Unreal Tournament 2003 Demo) {/usr/bin/ut2003-demo} - [exec] (xterm) {xterm -fg white -bg black} - -[submenu] (Browsers) - [exec] (lynx) {xterm -title lynx -fg white -bg black -e lynx} -[end] - - -[submenu] (Editors) - [exec] (xedit) {xedit} -[end] - - -[submenu] (Net) - [exec] (irssi) {xterm -title irssi -e irssi} -[end] - - -[submenu] (Graphics) -[end] - - -[submenu] (Music) -[end] - - -[submenu] (Terminals) - [exec] (xterm) {xterm -fg white -bg black} -[end] - - -[submenu] (Misc) - [exec] (tail access_log) {xterm -fg white -bg black -title access_log -e tail -f /var/log/access_log} -[end] - - -[submenu] (X-utils) - [exec] (xcalc) {xcalc} - [exec] (xfontsel) {xfontsel} - [exec] (xman) {xman} - [exec] (xload) {xload} - [exec] (xbiff) {xbiff} - [exec] (editres) {editres} - [exec] (viewres) {viewres} - [exec] (xclock) {xclock} -[end] - - -[submenu] (Settings) - [workspaces] (Workspace List) -[submenu] (Styles) {Choose a style...} - [stylesdir] (/usr/share/commonbox/styles) -[end] - - [config] (Configure) - [reconfig] (Reload config) -[end] - - [restart] (Restart) - [exit] (Exit) -[end] - diff --git a/src/livecd/profiles/ut2003-demo/aux-files/dot-openbox/rc b/src/livecd/profiles/ut2003-demo/aux-files/dot-openbox/rc deleted file mode 100644 index 027d343cbd..0000000000 --- a/src/livecd/profiles/ut2003-demo/aux-files/dot-openbox/rc +++ /dev/null @@ -1,45 +0,0 @@ -session.screen0.toolbar.onTop: False -session.screen0.toolbar.autoHide: False -session.screen0.toolbar.widthPercent: 66 -session.screen0.toolbar.placement: BottomCenter -session.screen0.slit.onTop: False -session.screen0.slit.autoHide: False -session.screen0.slit.placement: CenterRight -session.screen0.slit.direction: Vertical -session.screen0.colPlacementDirection: TopToBottom -session.screen0.rowPlacementDirection: LeftToRight -session.screen0.focusNewWindows: False -session.screen0.windowPlacement: RowSmartPlacement -session.screen0.opaqueMove: False -session.screen0.imageDither: True -session.screen0.placementIgnoreMaximized: True -session.screen0.edgeSnapOffset: 0 -session.screen0.hideToolbar: False -session.screen0.windowCornerSnap: True -session.screen0.windowToWindowSnap: Resistance -session.screen0.workspaces: 1 -session.screen0.resizeZones: 4 -session.screen0.workspaceNames: Workspace 1 -session.screen0.workspaceWarping: False -session.screen0.focusModel: SloppyFocus -session.screen0.antialiasFonts: True -session.screen0.fullMaximization: False -session.screen0.focusLastWindow: False -session.screen0.windowToEdgeSnap: Resistance -session.screen0.rootScrollDirection: Normal -session.screen0.resistanceSize: 18 -session.screen0.edgeSnapThreshold: 4 -session.screen0.strftimeFormat: %I:%M %p -session.screen0.placementIgnoreShaded: True -session.screen0.disableBindingsWithScrollLock: False -session.xineramaSupport.windowPlacement: False -session.xineramaSupport.windowMaximizing: False -session.xineramaSupport.windowSnapping: False -session.cacheMax: 200 -session.autoRaiseDelay: 400 -session.styleFile: /usr/share/commonbox/styles/Cthulhain -session.modifierMask: Mod1 -session.cacheLife: 5 -session.doubleClickInterval: 250 -session.titlebarLayout: ILMC -session.colorsPerChannel: 4 diff --git a/src/livecd/profiles/ut2003-demo/aux-files/issue b/src/livecd/profiles/ut2003-demo/aux-files/issue deleted file mode 100644 index a0e98456df..0000000000 --- a/src/livecd/profiles/ut2003-demo/aux-files/issue +++ /dev/null @@ -1,5 +0,0 @@ - -Welcome to the Gentoo Linux 1.4.1 "live" install/UT2003-demo CD. Log in as -"root" with no password. If you plan to enable networking, you should set a -root password by typing "passwd" after you log in. - diff --git a/src/livecd/profiles/ut2003-demo/aux-files/local.start b/src/livecd/profiles/ut2003-demo/aux-files/local.start deleted file mode 100644 index 8a1c25f664..0000000000 --- a/src/livecd/profiles/ut2003-demo/aux-files/local.start +++ /dev/null @@ -1,17 +0,0 @@ -# /etc/conf.d/local.start: -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/ut2003-demo/aux-files/Attic/local.start,v 1.1 2003/10/19 03:46:50 livewire Exp $ - -# This is a good place to load any misc. -# programs on startup ( 1>&2 ) - -X -configure -mv /root/XF86Config.new /etc/X11/XF86Config -rm /dev/mouse -# FIXME: serial mouse support???? -if [ -b /dev/input/mouse0 ] - sed -e 's^Option \"Protocol\" \"auto\"^Option \"Protocol\" \"IMPS/2\"^' < /etc/X11/XF86Config > /etc/X11/XF86Config - ln -sf /dev/input/mouse0 /dev/mouse -else - ln -sf /dev/psaux /dev/mouse -fi - diff --git a/src/livecd/profiles/ut2003-demo/aux-files/motd b/src/livecd/profiles/ut2003-demo/aux-files/motd deleted file mode 100644 index 7886d82eab..0000000000 --- a/src/livecd/profiles/ut2003-demo/aux-files/motd +++ /dev/null @@ -1,3 +0,0 @@ - -Type "help" to learn about all the cool things you can do with this nifty CD! :) - diff --git a/src/livecd/profiles/ut2003-demo/aux-files/ut2k3-demo-LICENSE b/src/livecd/profiles/ut2003-demo/aux-files/ut2k3-demo-LICENSE deleted file mode 100644 index ebbb7a74ec..0000000000 --- a/src/livecd/profiles/ut2003-demo/aux-files/ut2k3-demo-LICENSE +++ /dev/null @@ -1,116 +0,0 @@ -END-USER LICENSE AGREEMENT - - PLEASE READ CAREFULLY. BY USING OR INSTALLING THIS SOFTWARE, OR BY -PLACING OR COPYING THIS SOFTWARE ON YOUR COMPUTER HARDWARE, COMPUTER RAM -OR OTHER STORAGE MEDIUM, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF -THIS LICENSE. IF YOU DO NOT AGREE TO THESE TERMS, PROMPTLY DISCONTINUE -THE INSTALLATION PROCESS AND CEASE ALL USE OF THIS SOFTWARE. - - 1. Thanks. Congratulations and thank you for licensing our software. -We're sorry to cramp your style, but our lawyers tell us that if we want -to keep control and ownership of the cool stuff we're developing, we -have to make sure you understand and agree that you are just getting a -right to use it and that that right is limited in certain ways. So -here's what follows is what you need to know and agree to. - - 2. License. The demonstration version of the software accompanying -this license and the related documentation (the "Demo Software") are -licensed for your use and gaming enjoyment, subject to terms and -limitations in this license agreement. This is not a full fledged -version of the software; it is a demonstration version. - - 3. Use Restrictions. We want you to enjoy our products for years to -come, and we want to be able to continue to send you awesome games, so -you need to be aware that there are some things you cannot do with the -Demo Software. The Demo Software contains copyrighted material, trade -secrets and other proprietary material. You may not decompile, modify, -reverse engineer, prepare derivative works based on the Demo Software, -or disassemble the Demo Software. You may not rent, sell, lease, -barter, or sublicense the Demo Software. You may not delete the -copyright notices or any other proprietary legends on the original copy -of the Demo Software. You may not offer the Demo Software on a -pay-per-play basis or otherwise commercially exploit the Demo Software -or use the Demo Software for any commercial purpose. You may, however, -exchange the Demo Software at no charge among other end-users and -distribute them to others over the Internet, on magazine cover disks, or -otherwise for free. You may not ship or export the Demo Software to any -country other than where you bought it, in violation of the U.S. Export -Administration Act (or any other law governing such matters) and you -will not utilize and will not authorize anyone to utilize the Demo -Software in violation of any applicable law. The Demo Software may not -be downloaded or otherwise exported into (or to a national or resident -of) any country to which the U.S. has embargoed goods or to anyone or -into any country who/which are prohibited by applicable law, from -receiving it. - - 4. Termination. This license is effective until one of us terminate -it. You may terminate this license at any time by destroying the Demo -Software and related documentation. In the unlikely event that you are -naughty and fail to comply with any provision of this license, this -license will terminate immediately without notice from us. Upon -termination, you must destroy the Demo Software and related -documentation. Please don't wait for us to come after you; it would not -be pleasant for either of us. If we do have to come after you, we're -going to expect you to pay us for our troubles, including the cost of -our lawyers. - - 5. Disclaimer of Warranty on Software. You are aware and agree that -use of the Demo Software and the media on which it is recorded at your -sole risk. The Demo Software, related documentation and the media are -provided "AS IS". INFOGRAMES (OUR PUBLISHER) AND EPIC GAMES, INC. -("EPIC") EXPRESSLY DISCLAIM ALL OTHER WARRANTIES. EXPRESS OR IMPLIED, -INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY -AND FITNESS FOR A PARTICULAR PURPOSE. WE DO NOT WARRANT THAT THE -FUNCTIONS CONTAINED IN THE DEMO SOFTWARE WILL MEET YOUR REQUIREMENTS. -NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY US OR ANY OF OUR -AUTHORIZED REPRESENTATIVES SHALL CREATE A WARRANTY OR IN ANY WAY -INCREASE THE SCOPE OF THIS WARRANTY. SOME JURISDICTIONS DO NOT ALLOW -THE EXCLUSION OF IMPLIED WARRANTIES, S0 THE ABOVE EXCLUSIONS MAY NOT -APPLY TO YOU. - - 6. Limitation of Liability. UNDER NO CIRCUMSTANCES, INCLUDING WITHOUT -LIMITATION, NEGLIGENCE, SHALL INFOGRAMES, EPIC OR ANY OF THEIR -RESPECTIVE OFFICERS, EMPLOYEES, DIRECTORS, AGENTS, LICENSEES, -SUBLICENSEE OR ASSIGNS BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR -CONSEQUENTIAL DAMAGES THAT RESULT FROM THE USE OR INABILITY TO USE THE -DEMO SOFTWARE OR RELATED DOCUMENTATION, EVEN IF SUCH PARTIES HAVE BEEN -ADVISED OF THE POSSIBILITY OF THOSE DAMAGES. SOME JURISDICTIONS DO NOT -ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR -CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY -TO YOU. In no event shall our total liability to you for all damages, -losses, and causes of action (whether in contract, tort or otherwise) -exceed the amount paid by you for the Software. - - 7. Controlling Law and Severability. This license is governed by and -construed in accordance with the laws of the State of North Carolina, -USA. Exclusive venue for all litigation shall be in Wake County, North -Carolina. If any provision of this license is unenforceable, the rest -of it shall remain in effect. - - 8. Complete Agreement. This license constitutes the entire agreement -between the parties with respect to the use of the Demo Software and the -related documentation. However, Infogrames and Epic reserve the right -to modify the terms of this license from time to time and will post -notice of material changes somewhere within www.epicgames.com. - - 9. Copyright. The Demo Software and all copyrights, trademarks and all -other conceivable intellectual property rights related to the Demo -Software are owned by Infogrames, Epic or such parties' licensors and -are protected by United States copyrights laws, international treaty -provisions, an army of clones, and all applicable law, such as the -Lanham Act. You must treat the Demo Software like any other copyrighted -material, as required by 17 U.S.C. section 101 et seq. and other -applicable law. This program you've licensed was produced through the -efforts of many people who earn their livelihood from its lawful use. -These people like to eat, so please feel free to make as many copies of -only this Demo Software for your friends and acquaintances to enjoy it -as well............and maybe they'll license full versions like we know -you will. - - 10. Enjoyment Requirements. We are aware that there are rumblings and -grumblings within the gaming community about heavy handed, legally -onerous license agreements. You have our word that this one is as fair -and even handed as it gets and, as you have read this far, you know it -to be true. Now, be gone from this screen and enjoy the Demo Software, -and if you like it, be sure to tell all your friends how great it is and -make sure they try it, too! diff --git a/src/livecd/profiles/ut2003-demo/kernel-config b/src/livecd/profiles/ut2003-demo/kernel-config deleted file mode 100644 index e9f0cf346f..0000000000 --- a/src/livecd/profiles/ut2003-demo/kernel-config +++ /dev/null @@ -1,1318 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -# CONFIG_M68631 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -CONFIG_1GB=y -# CONFIG_2GB is not set -# CONFIG_3GB is not set -# CONFIG_05GB is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -CONFIG_SMP=y -# CONFIG_MULTIQUAD is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -# CONFIG_HOTPLUG is not set -# CONFIG_PCMCIA is not set -# CONFIG_HOTPLUG_PCI is not set -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -# CONFIG_PM is not set -# CONFIG_APM is not set - -# -# ACPI Support -# -# CONFIG_ACPI is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -CONFIG_EVMS_GPT_SEGMENT_MGR=m -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -CONFIG_EVMS_OS2=m -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -# CONFIG_MD_LINEAR is not set -# CONFIG_MD_RAID0 is not set -# CONFIG_MD_RAID1 is not set -# CONFIG_MD_RAID5 is not set -# CONFIG_MD_MULTIPATH is not set -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -# CONFIG_CRYPTO is not set -# CONFIG_CIPHERS is not set -# CONFIG_DIGESTS is not set -# CONFIG_CRYPTODEV is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=m -# CONFIG_NETFILTER is not set -CONFIG_FILTER=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_IPV6=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_IPX is not set -CONFIG_ATALK=m - -# -# Appletalk devices -# -CONFIG_DEV_APPLETALK=y -CONFIG_LTPC=m -CONFIG_COPS=m -CONFIG_COPS_DAYNA=y -CONFIG_COPS_TANGENT=y -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_IPDDP_DECAP=y -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set -# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set -# CONFIG_BLK_DEV_IDEDISK_IBM is not set -# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set -# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set -# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set -# CONFIG_BLK_DEV_IDEDISK_WD is not set -# CONFIG_BLK_DEV_COMMERIAL is not set -# CONFIG_BLK_DEV_TIVO is not set -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -CONFIG_IDE_TASK_IOCTL=y -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set -# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set -CONFIG_BLK_DEV_ADMA=y -CONFIG_BLK_DEV_AEC62XX=y -CONFIG_AEC62XX_TUNING=y -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_CMD680=y -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_PIIX_TUNING=y -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX=y -CONFIG_PDC202XX_BURST=y -CONFIG_PDC202XX_FORCE=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -CONFIG_IDEDMA_IVB=y -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -CONFIG_SCSI_SYM53C8XX=m -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -# CONFIG_SCSI_DC395x_TRMS1040 is not set -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=y -CONFIG_IEEE1394_OHCI1394=m -# CONFIG_IEEE1394_VIDEO1394 is not set -CONFIG_IEEE1394_SBP2=y -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -# CONFIG_IEEE1394_DV1394 is not set -CONFIG_IEEE1394_RAWIO=m -CONFIG_IEEE1394_CMP=m -CONFIG_IEEE1394_AMDTP=m -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -CONFIG_I2O=m -CONFIG_I2O_PCI=m -CONFIG_I2O_BLOCK=m -CONFIG_I2O_LAN=m -CONFIG_I2O_SCSI=m -CONFIG_I2O_PROC=m - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -CONFIG_BONDING=m -CONFIG_EQUALIZER=m -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set -# CONFIG_NET_SB1000 is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -# CONFIG_SUNGEM is not set -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_SK98LIN=m -CONFIG_TIGON3=m -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PLIP=m -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -CONFIG_TMS380TR=m -CONFIG_TMSPCI=m -CONFIG_TMSISA=m -CONFIG_ABYSS=m -# CONFIG_MADGEMC is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# -CONFIG_IRTTY_SIR=m -CONFIG_IRPORT_SIR=m -CONFIG_DONGLE=y -CONFIG_ESI_DONGLE=m -CONFIG_ACTISYS_DONGLE=m -CONFIG_TEKRAM_DONGLE=m -CONFIG_GIRBIL_DONGLE=m -CONFIG_LITELINK_DONGLE=m -CONFIG_MCP2120_DONGLE=m -CONFIG_OLD_BELKIN_DONGLE=m -CONFIG_ACT200L_DONGLE=m -CONFIG_MA600_DONGLE=m -CONFIG_USB_IRDA=m -CONFIG_NSC_FIR=m -CONFIG_WINBOND_FIR=m -CONFIG_TOSHIBA_FIR=m -CONFIG_SMC_IRCC_FIR=m -CONFIG_ALI_FIR=m -CONFIG_VLSI_FIR=m - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -CONFIG_ISDN_AUDIO=y -CONFIG_ISDN_TTY_FAX=y - -# -# ISDN feature submodules -# -CONFIG_ISDN_DRV_LOOP=m -CONFIG_ISDN_DIVERSION=m - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -CONFIG_ISDN_DRV_EICON_OLD=m -CONFIG_ISDN_DRV_EICON_PCI=y -CONFIG_ISDN_DRV_EICON_ISA=y -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -CONFIG_INPUT_EVDEV=m - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -# CONFIG_CYZ_INTR is not set -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -# CONFIG_SPECIALIX_RTSCTS is not set -CONFIG_SX=m -CONFIG_RIO=m -CONFIG_RIO_OLDPCI=y -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set -CONFIG_ACQUIRE_WDT=m -CONFIG_ADVANTECH_WDT=m -CONFIG_ALIM7101_WDT=m -CONFIG_SC520_WDT=m -CONFIG_PCWATCHDOG=m -CONFIG_EUROTECH_WDT=m -CONFIG_IB700_WDT=m -CONFIG_WAFER_WDT=m -CONFIG_I810_TCO=m -CONFIG_MIXCOMWD=m -CONFIG_60XX_WDT=m -CONFIG_SC1200_WDT=m -CONFIG_SOFT_WATCHDOG=m -CONFIG_W83877F_WDT=m -CONFIG_WDT=m -CONFIG_WDTPCI=m -CONFIG_WDT_501=y -CONFIG_WDT_501_FAN=y -CONFIG_MACHZ_WDT=m -CONFIG_AMD7XX_TCO=m -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -CONFIG_AMD_PM768=m -CONFIG_NVRAM=m -CONFIG_RTC=m -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -CONFIG_SONYPI=m - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -CONFIG_MWAVE=m - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -CONFIG_QUOTA=y -CONFIG_QFMT_V1=m -CONFIG_QFMT_V2=m -CONFIG_QIFACE_COMPAT=y -CONFIG_QIFACE_V1=y -# CONFIG_QIFACE_V2 is not set -# CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=m -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -CONFIG_REISERFS_PROC_INFO=y -# CONFIG_ADFS_FS is not set -# CONFIG_ADFS_FS_RW is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -CONFIG_JFS_STATISTICS=y -CONFIG_MINIX_FS=m -# CONFIG_VXFS_FS is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -CONFIG_DEVPTS_FS=y -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -# CONFIG_ROMFS_FS is not set -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=m -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -CONFIG_XFS_QUOTA=y -CONFIG_XFS_DMAPI=y -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_ROOT_NFS is not set -CONFIG_NFSD=m -# CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_IMON=m -CONFIG_EXECOUNT=y - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -CONFIG_VIDEO_SELECT=y -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -CONFIG_FB=y -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FB_LOGO_TUX is not set -# CONFIG_FB_LOGO_LARRY is not set -# CONFIG_FB_LOGO_GENTOO is not set -CONFIG_FB_LOGO_G=y -# CONFIG_FB_LOGO_PENGUIN is not set -# CONFIG_FB_LOGO_POWEREDBY is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_CLGEN is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_VESA=y -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_HGA is not set -CONFIG_VIDEO_SELECT=y -# CONFIG_FB_MATROX is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set -# CONFIG_FBCON_ADVANCED is not set -CONFIG_FBCON_CFB8=y -CONFIG_FBCON_CFB16=y -CONFIG_FBCON_CFB24=y -CONFIG_FBCON_CFB32=y -# CONFIG_FBCON_FONTWIDTH8_ONLY is not set -# CONFIG_FBCON_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_SOUND_ALI5455=m -CONFIG_SOUND_BT878=m -CONFIG_SOUND_CMPCI=m -CONFIG_SOUND_CMPCI_FM=y -CONFIG_SOUND_CMPCI_FMIO=388 -CONFIG_SOUND_CMPCI_FMIO=388 -CONFIG_SOUND_CMPCI_MIDI=y -CONFIG_SOUND_CMPCI_MPUIO=330 -CONFIG_SOUND_CMPCI_JOYSTICK=y -CONFIG_SOUND_CMPCI_CM8738=y -# CONFIG_SOUND_CMPCI_SPDIFINVERSE is not set -# CONFIG_SOUND_CMPCI_SPDIFLOOP is not set -CONFIG_SOUND_CMPCI_SPEAKERS=2 -CONFIG_SOUND_EMU10K1=m -CONFIG_MIDI_EMU10K1=y -CONFIG_SOUND_FUSION=m -CONFIG_SOUND_CS4281=m -CONFIG_SOUND_ES1370=m -CONFIG_SOUND_ES1371=m -CONFIG_SOUND_ESSSOLO1=m -CONFIG_SOUND_MAESTRO=m -CONFIG_SOUND_MAESTRO3=m -CONFIG_SOUND_FORTE=m -CONFIG_SOUND_ICH=m -CONFIG_SOUND_RME96XX=m -CONFIG_SOUND_SONICVIBES=m -CONFIG_SOUND_TRIDENT=m -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -CONFIG_SOUND_VIA82CXXX=m -CONFIG_MIDI_VIA82CXXX=y -CONFIG_SOUND_OSS=m -# CONFIG_SOUND_TRACEINIT is not set -# CONFIG_SOUND_DMAP is not set -CONFIG_SOUND_AD1816=m -CONFIG_SOUND_SGALAXY=m -CONFIG_SOUND_ADLIB=m -CONFIG_SOUND_ACI_MIXER=m -CONFIG_SOUND_CS4232=m -CONFIG_SOUND_SSCAPE=m -CONFIG_SOUND_GUS=m -# CONFIG_SOUND_GUS16 is not set -# CONFIG_SOUND_GUSMAX is not set -CONFIG_SOUND_VMIDI=m -CONFIG_SOUND_TRIX=m -CONFIG_SOUND_MSS=m -CONFIG_SOUND_MPU401=m -CONFIG_SOUND_NM256=m -CONFIG_SOUND_MAD16=m -# CONFIG_MAD16_OLDCARD is not set -CONFIG_SOUND_PAS=m -# CONFIG_PAS_JOYSTICK is not set -CONFIG_SOUND_PSS=m -# CONFIG_PSS_MIXER is not set -# CONFIG_PSS_HAVE_BOOT is not set -CONFIG_SOUND_SB=m -CONFIG_SOUND_AWE32_SYNTH=m -CONFIG_SOUND_WAVEFRONT=m -CONFIG_SOUND_MAUI=m -CONFIG_SOUND_YM3812=m -CONFIG_SOUND_OPL3SA1=m -CONFIG_SOUND_OPL3SA2=m -CONFIG_SOUND_YMFPCI=m -CONFIG_SOUND_YMFPCI_LEGACY=y -CONFIG_SOUND_UART6850=m -CONFIG_SOUND_AEDSP16=m -# CONFIG_SC6600 is not set -# CONFIG_AEDSP16_SBPRO is not set -# CONFIG_AEDSP16_MSS is not set -# CONFIG_AEDSP16_MPU401 is not set -# CONFIG_SOUND_TVMIXER is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_LONG_TIMEOUT is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=y -# CONFIG_USB_UHCI_ALT is not set -CONFIG_USB_OHCI=y -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_BLUETOOTH is not set -CONFIG_USB_MIDI=m -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -CONFIG_USB_HIDDEV=y -CONFIG_USB_AIPTEK=m -CONFIG_USB_WACOM=m -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -# CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_TIGL is not set -CONFIG_USB_BRLVGER=m -CONFIG_USB_LCD=m - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Windows Applications support -# -# CONFIG_MKI is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/ut2003-demo/settings b/src/livecd/profiles/ut2003-demo/settings deleted file mode 100644 index 06fa117706..0000000000 --- a/src/livecd/profiles/ut2003-demo/settings +++ /dev/null @@ -1,16 +0,0 @@ -source ${LIVECD_ROOT}/profiles/global/settings -CD_BUILDROOT=${CD_TEMPROOT}/${CD_PROFILE} -CD_PORTAGE_PROFILE="default-x86-1.4" -CD_USE="xfs acpi4linux crypt -X -gtk -arts -svga -directfb -ggi -esd -nas -perl -python" -CD_CFLAGS="-O3 -march=i586 -mcpu=i686 -pipe" -CD_CXXFLAGS="${CD_CFLAGS}" -CD_STAGETARBALL=http://www.ibiblio.org/gentoo/releases/1.4_rc2/x86/i686/stages/stage3-i686-1.4_rc2.tbz2 -#CD_STAGETARBALL=http://www.gentoo.org/dyn/experimental/i586/stage3-i586-1.4_rc2.tbz2 -#modules to auto-detect/copy to the initrd (put in the "/modules/storage" directory) -STORAGE_MODULES="aic7xxx BusLogic ncr53c8xx \ -NCR53c406a initio advansys aha1740 aha1542 aha152x \ -atp870u dtc eata fdomain gdth megaraid pas16 pci2220i \ -pci2000 psi240i qlogicfas qlogicfc qlogicisp seagate \ -t128 tmscsim u14-34f ultrastor wd7000" -LOOP_SIZE="1000000" - diff --git a/src/livecd/profiles/ut2003-demo/stage1-packages b/src/livecd/profiles/ut2003-demo/stage1-packages deleted file mode 100644 index e5246e18ba..0000000000 --- a/src/livecd/profiles/ut2003-demo/stage1-packages +++ /dev/null @@ -1,35 +0,0 @@ -=sys-kernel/xfs-sources-2.4.19-r2 -metalog -strace -ncftp -dialog -lilo -grub -nvi -parted -app-arch/mt-st -sys-apps/star -dev-util/strace -sys-apps/pciutils -net-dialup/wvdial -sys-apps/xfsdump -net-www/lynx -sys-apps/raidtools -sys-apps/e2fsprogs -sys-apps/xfsprogs -sys-apps/reiserfs-utils -sys-apps/hdparm -app-editors/nano -sys-apps/less -net-misc/openssh -net-misc/dhcpcd -sys-apps/lvm-user -net-fs/nfs-utils -net-irc/irssi -xfree -openbox -commonbox-styles -commonbox-utils -aumix -jfsutils -speedtouch diff --git a/src/livecd/profiles/ut2003-demo/stage2-packages b/src/livecd/profiles/ut2003-demo/stage2-packages deleted file mode 100644 index 55eeec7227..0000000000 --- a/src/livecd/profiles/ut2003-demo/stage2-packages +++ /dev/null @@ -1 +0,0 @@ -ut2003-demo diff --git a/src/livecd/profiles/x86/aux-files/1024.initrd b/src/livecd/profiles/x86/aux-files/1024.initrd Binary files differdeleted file mode 100644 index ba0cf2b6d3..0000000000 --- a/src/livecd/profiles/x86/aux-files/1024.initrd +++ /dev/null diff --git a/src/livecd/profiles/x86/aux-files/aumix b/src/livecd/profiles/x86/aux-files/aumix deleted file mode 100644 index d1f4479201..0000000000 --- a/src/livecd/profiles/x86/aux-files/aumix +++ /dev/null @@ -1,44 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2003 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/x86/aux-files/Attic/aumix,v 1.1 2003/10/19 03:10:55 livewire Exp $ - -depend() { - need modules - use alsa -} - -checkconfig() { - if [ -z "`grep 'sound' /proc/devices`" ] && [ ! -d /proc/asound ] - then - eerror "Sound support has not been compiled into the kernel," - eerror "or is disabled. Please check that the correct modules" - eerror "is loaded." - return 1 - fi - # /dev/mixer can be a symlink - if [ ! -e /dev/mixer ] ; then - eerror "/dev/mixer do not exist, please create it, or load the" - eerror "correct modules to enable your card's mixer" - return 1 - fi -} - -start() { - checkconfig || return 1 - if [ -f /etc/aumixrc ] ; then - ebegin "Loading Mixer settings" - /usr/bin/aumix -f /etc/aumixrc -L >/dev/null 2>&1 - else - ebegin "Setting Mixer settings" - /usr/bin/aumix -v100 -c100 -w100 >/dev/null 2>&1 - fi - eend $? -} - -stop() { - checkconfig || return 1 - ebegin "Saving Mixer settings" - /usr/bin/aumix -f /etc/aumixrc -S >/dev/null 2>&1 - eend $? -} diff --git a/src/livecd/profiles/x86/aux-files/autoconfig b/src/livecd/profiles/x86/aux-files/autoconfig deleted file mode 100644 index ac80284b27..0000000000 --- a/src/livecd/profiles/x86/aux-files/autoconfig +++ /dev/null @@ -1,182 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/x86/aux-files/Attic/autoconfig,v 1.1 2003/10/19 03:10:55 livewire Exp $ -echo "0" > /proc/sys/kernel/printk -DHCP="yes" -DETECT="yes" -PCMCIA="no" -HOTPLUG="yes" -APM="no" -ACPI="no" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "nodetect" ] - then - DETECT="no" - HOTPLUG="no" - APM="no" - ACPI="no" - fi -done -for x in $CMDLINE -do - if [ "$x" = "nodhcp" ] - then - DHCP="no" - fi -done -for x in $CMDLINE -do - if [ "$x" = "dopcmcia" ] - then - PCMCIA="yes" - fi -done -for x in $CMDLINE -do - if [ "$x" = "nohotplug" ] - then - HOTPLUG="no" - fi -done -for x in $CMDLINE -do - if [ "$x" = "noapm" ] - then - APM="no" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "acpi=on" ] - then - APM="no" - ACPI="yes" - fi -done - - -depend() { - after * -} - -start() { -if [ "$DETECT" = "yes" ] - then - ebegin $WARN"Hardware detection started" - PC=`awk -F: '/^processor/{printf "Processor"$2" is"};/^model name/{printf $2};/^vendor_id/{printf vendor};/^cpu MHz/{printf " %dMHz",int($2)};/^cache size/{printf ","$2" Cache"};/^$/{print ""}' /proc/cpuinfo 2>/dev/null` - ebegin $GOOD"$PC" - eend - hwsetup -p >/dev/null - eend - else - ebegin $WARN"Hardware detection disabled via cmdline$NORMAL" -fi - -if [ "$APM" = "no" ] - then - ebegin $GOOD"Not Loading APM Bios support.${NORMAL}" - else - insmod apm power_off=1 >/dev/null 2>&1 && ebegin $GOOD"APM BIOS found, power management functions enabled.$NORMAL" - /etc/init.d/apmd start - eend -fi - - -if [ "$ACPI" = "yes" ] - then - insmod processor >/dev/null 2>&1 && ebegin $GOOD ACPI power management functions enabled.$NORMAL - insmod fan >/dev/null - insmod thermal >/dev/null - insmod button >/dev/null - insmod battery >/dev/null - insmod ac >/dev/null - /etc/init.d/acpid start - eend -fi - -if [ "$PCMCIA" = "yes" ] - then - ebegin $HILITE "PCMCIA enabled via cmdline" - /etc/init.d/pcmcia start -fi - -if [ "$DHCP" = "no" ] - then - sed 's/iface_eth0="dhcp"/#iface_eth0="dhcp"/' /etc/conf.d/net > /etc/conf.d/net1 - cp /etc/conf.d/net1 /etc/conf.d/net - rm /etc/conf.d/net1 - ebegin $BAD"Skipping DHCP broadcast detection as requested on boot commandline." -fi - - #Read in what hwsetup has found -[ -f /etc/sysconfig/knoppix ] && . /etc/sysconfig/knoppix - -# Mouse -if [ -n "$MOUSE_DEVICE" ] - then - ebegin $GOOD"Mouse is $HILITE$MOUSE_FULLNAME$GOOD at $HILITE$MOUSE_DEVICE$NORMAL" - eend -fi - -if [ "$HOTPLUG" = "yes" ] - then - /etc/init.d/hotplug start - else - ebegin $BAD"Hotplug disabled via cmdline$NORMAL" -fi - -if [ "$DETECT" = "no" ] - then - DHCP="no" - -fi - -if [ "$DETECT" = "yes" ] - then - NETDEVICES="`awk -F: '/eth.:|tr.:/{print $1}' /proc/net/dev 2>/dev/null`" -fi - -if [ -n "$NETDEVICES" ] - then - ebegin $GOOD"Network device$HILITE$NETDEVICES$GOOD detected,$WARN DHCP broadcasting for IP.$NORMAL" - eend - else - ebegin $BAD"No Network device auto detected.$NORMAL" - -fi - - -if [ -n "$SOUND_FULLNAME" -o -n "$SOUND_DRIVER" ] - then - # Setting micro input to zero to avoid subsonic disaster - ebegin $GOOD"Soundcard:" - eend - aumix -m 0 >/dev/null 2>&1 - aumix -f /etc/aumixrc -L >/dev/null 2>&1 - aumix -v75 -c75 -w75 >/dev/null 2>&1 -# modprobe /dev/dsp - [ -n "$SOUND_FULLNAME" ] - ebegin " $WARN$SOUND_FULLNAME" - [ -n "$SOUND_DRIVER" ] - ebegin $WARN" driver = $SOUND_DRIVER"$HILITE -fi - - -if [ -n "$XDESC" -o -n "$XDESC" ] - then - ebegin $GOOD"VideoCard: $WARN ${XDESC}" - eend -fi - - -killall hwsetup 2>/dev/null -test -f /proc/splash && echo "show 65535" > /proc/splash -echo "6" > /proc/sys/kernel/printk -sleep 1 -echo off >/proc/splash -clear -} diff --git a/src/livecd/profiles/x86/aux-files/bootsplash-1024x768.cfg b/src/livecd/profiles/x86/aux-files/bootsplash-1024x768.cfg deleted file mode 100644 index ca47f2ad2e..0000000000 --- a/src/livecd/profiles/x86/aux-files/bootsplash-1024x768.cfg +++ /dev/null @@ -1,56 +0,0 @@ -# This is a bootsplash configuration file for -# theme SuSE, resolution 1024x768. See -# ftp://ftp.suse.com/pub/people/stepan/bootsplash for -# more information. Comments are welcome by stepan@suse.de - -# config file version -version=3 - -# should the picture be displayed? -state=1 - -# fgcolor is the text forground color. -# bgcolor is the text background (i.e. transparent) color. -fgcolor=7 -bgcolor=0 - -# (tx, ty) are the (x, y) coordinates of the text window in pixels. -# tw/th is the width/height of the text window in pixels. -tx=25 -ty=28 -tw=979 -th=649 - -# ttf message output parameters -text_x=312 -text_y=532 -text_size=18 -#text_color=0xeef4ff -text_color=-0x000000 -# name of the picture file (full path recommended) -jpeg=/etc/bootsplash/gentoo/images/bootsplash-1024x768.jpg -silentjpeg=/etc/bootsplash/gentoo/images/silent-1024x768.jpg - -progress_enable=1 - -# background -box silent noover 204 582 820 612 #04045498 -box silent inter 204 583 204 611 #ffffff #ffffff #526bb0 #526bb0 -box silent 204 583 820 611 #ffffff #ffffff #526bb0 #526bb0 -# black border -box silent 204 582 820 582 #313234 -box silent 204 612 820 612 #eef4ff -box silent 204 582 204 612 #313234 -box silent 820 582 820 612 #eef4ff - -# text box (left, top) -box 19 19 19 679 #313234 -box 19 19 1005 19 #313234 -# (right, bottom) -box 1005 19 1005 679 #eef4ff -box 19 679 1005 679 #eef4ff - -# box itself -box noover 20 20 1004 678 #04045498 - -overpaintok=1 diff --git a/src/livecd/profiles/x86/aux-files/checkfs b/src/livecd/profiles/x86/aux-files/checkfs deleted file mode 100644 index 1636095a8a..0000000000 --- a/src/livecd/profiles/x86/aux-files/checkfs +++ /dev/null @@ -1,78 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/x86/aux-files/Attic/checkfs,v 1.1 2003/10/19 03:10:55 livewire Exp $ - - -depend() { - need checkroot modules -} - -start() { - # LVM support for /usr, /home, /opt .... - # This should be done *before* checking local - # volumes, or they never get checked. - - # NOTE: Add needed modules for LVM or RAID, etc - # to /etc/modules.autoload if needed - - if [ -x /sbin/vgscan -a -d /proc/lvm ] - then - ebegin "Setting up the Logical Volume Manager" - #still echo stderr for debugging - /sbin/vgscan >/dev/null - if [ "$?" -eq 0 ] && [ -x /sbin/vgchange -a -f /etc/lvmtab ] - then - /sbin/vgchange -a y >/dev/null - fi - eend $? "Failed to setup the LVM" - fi - - # Start software raid - if [ -x /sbin/raidstart -a -f /etc/raidtab -a -f /proc/mdstat ] - then - ebegin "Starting software RAID" - ACTIVE_RAID="`grep -E "md[0-9]+[[:space:]]?: active raid" /proc/mdstat | awk -F ':' '{print $1}'`" - if [ ! -z "${ACTIVE_RAID}" ] - then - for x in $(grep -E "raiddev /dev/md[0-9]+" /etc/raidtab | \ - awk '{print $2}' | grep -v "`echo ${ACTIVE_RAID} | sed s'/[[:space:]]//g'`") - do - /sbin/raidstart /dev/${x} - done - else - /sbin/raidstart --all - fi - eend $? "Failed to start software RAID" - fi - - if [ -f /fastboot ] - then - rm -f /fastboot - else - ebegin "Checking all filesystems" - if [ -f /forcefsck ] - then - ewarn "A full fsck has been forced" - fsck -C -R -A -a -f - rm -f /forcefsck - else - fsck -R -A -a >/dev/null 2>&1 - fi - if [ "$?" -eq 0 ] - then - eend 0 - elif [ "$?" -eq 1 ] - then - ewend 1 "Filesystem errors corrected." - #everything should be ok, so return a pass - return 0 - else - eend 2 "Fsck could not correct all errors, manual repair needed" - /sbin/sulogin ${CONSOLE} - fi - fi -} - - -# vim:ts=4 diff --git a/src/livecd/profiles/x86/aux-files/checkroot b/src/livecd/profiles/x86/aux-files/checkroot deleted file mode 100644 index c46365314b..0000000000 --- a/src/livecd/profiles/x86/aux-files/checkroot +++ /dev/null @@ -1,87 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/x86/aux-files/Attic/checkroot,v 1.1 2003/10/19 03:10:55 livewire Exp $ - - -depend() { - before * -} - -start() { - if [ ! -f /fastboot ] - then - ebegin "Remounting root filesystem read-only (if necessary)" - mount / -n -o remount,ro &>/dev/null - eend $? - - ebegin "Checking root filesystem" - if [ -f /forcefsck ] - then - ewarn "A full fsck has been forced" - ewarn "Skipping fsck; this is a livecd" -# fsck -C -f -a / - # /forcefsck isn't deleted because checkfs needs it. - # it'll be deleted in that script. - fi - if [ "$?" -eq 0 ] - then - eend 0 - elif [ "$?" -eq 1 ] - then - ewend 1 "Filesystem repaired" - else - eend 2 "Filesystem couldn't be fixed :(" - /sbin/sulogin ${CONSOLE} - /sbin/reboot -f - fi - fi - - ebegin "Remounting root filesystem read/write" - mount / -n -o remount,rw &>/dev/null - if [ "$?" -ne 0 ] - then - eend 2 "Root filesystem could not be mounted R/W :(" - /sbin/sulogin ${CONSOLE} - else - eend 0 - fi - - if [ "${BOOT}" = "yes" ] - then - # create /etc/mtab (done by forcing current mounted filesystems) - # NB: this needs to be updated if our /sbin/rc mounts change ... - > /etc/mtab - mount -f -o rw / &> /dev/null - mount -f /proc &> /dev/null - - # Remove stale backups - rm -f /etc/mtab~ /etc/mtab~~ - - # should /dev be mounted ? - if ! get_bootparam "nodevfs" && [ -e /dev/.devfsd ] - then - mount -f -t devfs none /dev &> /dev/null - fi - - # should we mount a ramdisk or tmpfs? - if ! get_bootparam "notmpfs" - then - # using tmpfs - mount -f -t tmpfs tmpfs ${svcdir} \ - -o rw,mode=0644,size=${svcsize}k &> /dev/null - else - # using a ramdisk - mount -f -t ext2 /dev/ram0 ${svcdir} -o rw &> /dev/null - fi - - if ! get_bootparam "notmpfs" && get_bootparam "ngpt" - then - # POSIX shared memory support - mount -f /dev/shm &> /dev/null - fi - fi -} - - -# vim:ts=4 diff --git a/src/livecd/profiles/x86/aux-files/depscan.sh b/src/livecd/profiles/x86/aux-files/depscan.sh deleted file mode 100644 index 7428022838..0000000000 --- a/src/livecd/profiles/x86/aux-files/depscan.sh +++ /dev/null @@ -1,41 +0,0 @@ -#!/bin/bash -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# Author: Martin Schlemmer <azarah@gentoo.org> -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/x86/aux-files/Attic/depscan.sh,v 1.1 2003/10/19 03:10:55 livewire Exp $ - -source /etc/init.d/functions.sh - -ebegin "Caching service dependencies" - - -lookbusy() { - local type - type=${1}; shift - for i in "$@" - do echo -n $GOOD" * Loading Services" $i;echo -n -e "\r"; - usleep 600000 ; -done -echo $WARN" * Loading Services 100%" -echo -n $NORMAL -} - -lookbusy '10%' '20%' '30%' '40%' '50%' '60%' '70%' '80%' '90%' '100%' - -/bin/gawk -v SVCDIR="${svcdir}" \ - -f /lib/rcscripts/awk/functions.awk \ - -f /lib/rcscripts/awk/cachedepends.awk - -cd /etc/init.d - -bash ${svcdir}/depcache | \ - /bin/gawk -v SVCDIR="${svcdir}" \ - -v DEPTYPES="${deptypes}" \ - -v ORDTYPES="${ordtypes}" \ - -f /lib/rcscripts/awk/functions.awk \ - -f /lib/rcscripts/awk/gendepends.awk - -eend $? "Failed to cache service dependencies" - - -# vim:ts=4 diff --git a/src/livecd/profiles/x86/aux-files/fbresolution b/src/livecd/profiles/x86/aux-files/fbresolution Binary files differdeleted file mode 100644 index cc077dab18..0000000000 --- a/src/livecd/profiles/x86/aux-files/fbresolution +++ /dev/null diff --git a/src/livecd/profiles/x86/aux-files/fbtruetype.static b/src/livecd/profiles/x86/aux-files/fbtruetype.static Binary files differdeleted file mode 100644 index c2b9654f9e..0000000000 --- a/src/livecd/profiles/x86/aux-files/fbtruetype.static +++ /dev/null diff --git a/src/livecd/profiles/x86/aux-files/freeramdisk.c b/src/livecd/profiles/x86/aux-files/freeramdisk.c deleted file mode 100644 index da82fba115..0000000000 --- a/src/livecd/profiles/x86/aux-files/freeramdisk.c +++ /dev/null @@ -1,32 +0,0 @@ -#include <stdio.h> -#include <string.h> -#include <sys/mount.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <fcntl.h> -#include <sys/ioctl.h> -#include <errno.h> - -main(int argc, char **argv) -{ - char rname[256]="/dev/ram"; - char b[256]; - int f; - if (argv[1]) strcpy(rname,argv[1]); - -#if 0 /* don't use on a living system, /etc/mtab is not updated */ - if (umount(rname) && (errno != ENOENT)) { - sprintf(b,"freeramdisk: cannot umount %s %d",rname,errno); - perror(b); - exit(1); - } -#endif - - if ((f=open(rname,O_RDWR)) == -1) { - sprintf(b,"freeramdisk: cannot open %s",rname); - perror(b); - exit(1); - } - ioctl(f,BLKFLSBUF); - close(f); -} diff --git a/src/livecd/profiles/x86/aux-files/fstab b/src/livecd/profiles/x86/aux-files/fstab deleted file mode 100644 index 08383a09ed..0000000000 --- a/src/livecd/profiles/x86/aux-files/fstab +++ /dev/null @@ -1,8 +0,0 @@ -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/x86/aux-files/Attic/fstab,v 1.1 2003/10/19 03:10:55 livewire Exp $ - -# /etc/fstab: static file system information. -proc /proc proc defaults 0 0 -tmpfs /dev/shm tmpfs defaults 0 0 -tmpfs /lib/dev-state tmpfs defaults 0 0 diff --git a/src/livecd/profiles/x86/aux-files/functions.sh b/src/livecd/profiles/x86/aux-files/functions.sh deleted file mode 100644 index 4f1619c35e..0000000000 --- a/src/livecd/profiles/x86/aux-files/functions.sh +++ /dev/null @@ -1,568 +0,0 @@ -# Copyright 1999-2003 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/x86/aux-files/Attic/functions.sh,v 1.1 2003/10/19 03:10:55 livewire Exp $ - -umask 022 - -if [ -z "${EBUILD}" ] -then - # Setup a basic $PATH. Just add system default to existing. - # This should solve both /sbin and /usr/sbin not present when - # doing 'su -c foo', or for something like: PATH= rcscript start - PATH="/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/sbin:${PATH}" -fi - -# daemontools dir -SVCDIR="/var/lib/supervise" - -# Check /etc/conf.d/rc for a description of these ... -svcdir="/var/lib/init.d" -svcmount="no" -svcfstype="tmpfs" -svcsize=1024 -shmdir="/mnt/.shm" - -# Different types of dependencies -deptypes="need use" -# Different types of order deps -ordtypes="before after" - -# -# Internal variables -# - -# Dont output to stdout? -RC_QUIET_STDOUT="no" - -# Should we use color? -RC_NOCOLOR="no" - -# -# Default values for rc system -# -RC_NET_STRICT_CHECKING="no" - -# Override defaults with user settings ... -[ -f /etc/conf.d/rc ] && source /etc/conf.d/rc - - -getcols() { - echo "$2" -} - -# Should we use colors ? -if [ -n "${EBUILD}" ] && [ "${*/depend}" = "$*" ] -then - # Check user pref in portage - RC_NOCOLOR="`python -c 'import portage; print portage.settings["NOCOLOR"]' 2> /dev/null`" - -elif [ -n "${EBUILD}" ] && [ "${*/depend}" != "$*" ] -then - # We do not want colors or stty to run during emerge depend - RC_NOCOLOR="yes" - -elif [ "`/bin/consoletype 2> /dev/null`" = "serial" ] -then - # We do not want colors on serial terminals - RC_NOCOLOR="yes" -else - # Lastly check if the user disabled it with --nocolor argument - for arg in $* - do - case "${arg}" in - --nocolor) - RC_NOCOLOR="yes" - ;; - esac - done -fi - -if [ "${RC_NOCOLOR}" = "yes" ] -then - COLS="25 80" - ENDCOL= - - if [ -n "${EBUILD}" ] && [ "${*/depend}" = "$*" ] - then - stty cols 80 &>/dev/null - stty rows 25 &>/dev/null - fi -else - COLS="`stty size 2> /dev/null`" - COLS="`getcols ${COLS}`" - COLS=$((${COLS} - 7)) - ENDCOL=$'\e[A\e['${COLS}'G' # Now, ${ENDCOL} will move us to the end of the - # column; irregardless of character width -fi - -if [ "${RC_NOCOLOR}" = "yes" ] -then - GOOD="" - WARN="" - BAD="" - NORMAL="" - - HILITE="" - BRACKET="" -else - GOOD=$'\e[32;01m' - WARN=$'\e[33;01m' - BAD=$'\e[31;01m' - NORMAL=$'\e[0m' - - HILITE=$'\e[36;01m' - BRACKET=$'\e[34;01m' -fi - -# void esyslog(char* priority, char* tag, char* message) -# -# use the system logger to log a message -# -esyslog() { - if [ -x /usr/bin/logger ] - then - pri="$1" - tag="$2" - - shift 2 - [ -z "$*" ] && return 0 - - /usr/bin/logger -p "${pri}" -t "${tag}" -- "$*" - fi -} - -# void einfo(char* message) -# -# show an informative message (with a newline) -# -einfo() { - if [ "${RC_QUIET_STDOUT}" = "yes" ] - then - return - else - echo -e " ${GOOD}*${NORMAL} ${*}" - fi -} - -# void einfon(char* message) -# -# show an informative message (without a newline) -# -einfon() { - if [ "${RC_QUIET_STDOUT}" = "yes" ] - then - return - else - echo -ne " ${GOOD}*${NORMAL} ${*}" - fi -} - -# void ewarn(char* message) -# -# show a warning message + log it -# -ewarn() { - if [ "${RC_QUIET_STDOUT}" = "yes" ] - then - echo " ${*}" - else - echo -e " ${WARN}*${NORMAL} ${*}" - fi - - # Log warnings to system log - esyslog "daemon.warning" "rc-scripts" "${*}" -} - -# void eerror(char* message) -# -# show an error message + log it -# -eerror() { - if [ "${RC_QUIET_STDOUT}" = "yes" ] - then - echo " ${*}" >/dev/stderr - else - echo -e " ${BAD}*${NORMAL} ${*}" - fi - - # Log errors to system log - esyslog "daemon.err" "rc-scripts" "${*}" -} - -# void ebegin(char* message) -# -# show a message indicating the start of a process -# -ebegin() { - if [ "${RC_QUIET_STDOUT}" = "yes" ] - then - return - else - if [ "${RC_NOCOLOR}" = "yes" ] - then - echo -ne " ${GOOD}*${NORMAL} ${*}..." - else - echo -e " ${GOOD}*${NORMAL} ${*}..." - fi - fi -} - -# void eend(int error, char* errstr) -# -# indicate the completion of process -# if error, show errstr via eerror -# -eend() { - if [ "$#" -eq 0 ] || ([ -n "$1" ] && [ "$1" -eq 0 ]) - then - if [ "${RC_QUIET_STDOUT}" != "yes" ] - then - echo -e "${ENDCOL} ${BRACKET}[ ${GOOD}ok${BRACKET} ]${NORMAL}" - fi - else - local retval="$1" - if [ "$#" -ge 2 ] - then - shift - eerror "${*}" - fi - if [ "${RC_QUIET_STDOUT}" != "yes" ] - then - echo -e "${ENDCOL} ${BRACKET}[ ${BAD}!!${BRACKET} ]${NORMAL}" - # extra spacing makes it easier to read - echo - fi - return ${retval} - fi -} - -# void ewend(int error, char *warnstr) -# -# indicate the completion of process -# if error, show warnstr via ewarn -# -ewend() { - if [ "$#" -eq 0 ] || ([ -n "$1" ] && [ "$1" -eq 0 ]) - then - if [ "${RC_QUIET_STDOUT}" != "yes" ] - then - echo -e "${ENDCOL} ${BRACKET}[ ${GOOD}ok${BRACKET} ]${NORMAL}" - fi - else - local retval="$1" - if [ "$#" -ge 2 ] - then - shift - ewarn "${*}" - fi - if [ "${RC_QUIET_STDOUT}" != "yes" ] - then - echo -e "${ENDCOL} ${BRACKET}[ ${WARN}!!${BRACKET} ]${NORMAL}" - # extra spacing makes it easier to read - echo - fi - return "${retval}" - fi -} - -# bool wrap_rcscript(full_path_and_name_of_rc-script) -# -# check to see if a given rc-script has syntax errors -# zero == no errors -# nonzero == errors -# -wrap_rcscript() { - local retval=1 - - ( echo "function test_script() {" ; cat "$1"; echo "}" ) > "${svcdir}/foo.sh" - - if source "${svcdir}/foo.sh" &> /dev/null - then - test_script &> /dev/null - retval=0 - fi - rm -f "${svcdir}/foo.sh" - return "${retval}" -} - -# int checkserver(void) -# -# Return 0 (no error) if this script is executed -# onto the server, one otherwise. -# See the boot section of /sbin/rc for more details. -# -checkserver() { - # Only do check if 'gentoo=adelie' is given as kernel param - if get_bootparam "adelie" - then - [ "`cat ${svcdir}/hostname`" = "(none)" ] || return 1 - fi - - return 0 -} - -# void init_node(void) -# -# Initialize an Adelie node. -# -init_node() { - ebegin "Importing local userspace on node" - - try mount -t tmpfs none "${shmdir}" - - for DIR in /etc /var /root - do - - if grep -q -v "^${DIR}[[:space:]]" /etc/exports - then - mount -o nolock -n server:"${DIR}" "${DIR}" - fi - - if [ -e "/etc/conf.d/exclude/${DIR}" ] - then - find "${DIR}/" -type d | grep -v -f "/etc/conf.d/exclude/${DIR}" \ - > "${shmdir}/${DIR}.lst" - else - find "${DIR}/" -type d > "${shmdir}/${DIR}.lst" - fi - - for SUBDIR in `cat ${shmdir}/${DIR}.lst` - do - mkdir -p "${shmdir}/${SUBDIR}" - chmod --reference="${SUBDIR}" "${shmdir}/${SUBDIR}" - cp -dp "${SUBDIR}"/* "${shmdir}/${SUBDIR}" &> /dev/null - done - - if [ -e "/etc/conf.d/exclude/${DIR}" ] - then - for EMPTYDIR in `cat "/etc/conf.d/exclude/${DIR}"` - do - mkdir -p "${shmdir}/${EMPTYDIR}" - chmod --reference="${SUBDIR}" "${shmdir}/${SUBDIR}" - done - fi - - umount -n "${DIR}" > /dev/null - mount -n -o bind "${shmdir}/${DIR}" "${DIR}" - done - - mkdir -p "${shmdir}/tmp" - chmod 0777 "${shmdir}/tmp" - mount -n -o bind "${shmdir}/tmp" /tmp - - cat /proc/mounts > /etc/mtab - - cp -f /etc/inittab.node /etc/inittab - [ -e /etc/fstab.node ] && cp -f /etc/fstab.node /etc/fstab - killall -1 init - - eend 0 -} - -# char *KV_major(string) -# -# Return the Major version part of given kernel version. -# -KV_major() { - [ -z "$1" ] && return 1 - - local KV="`echo $1 | \ - awk '{ tmp = $0; gsub(/^[0-9\.]*/, "", tmp); sub(tmp, ""); print }'`" - echo "${KV}" | awk -- 'BEGIN { FS = "." } { print $1 }' -} - -# char *KV_minor(string) -# -# Return the Minor version part of given kernel version. -# -KV_minor() { - [ -z "$1" ] && return 1 - - local KV="`echo $1 | \ - awk '{ tmp = $0; gsub(/^[0-9\.]*/, "", tmp); sub(tmp, ""); print }'`" - echo "${KV}" | awk -- 'BEGIN { FS = "." } { print $2 }' -} - -# char *KV_micro(string) -# -# Return the Micro version part of given kernel version. -# -KV_micro() { - [ -z "$1" ] && return 1 - - local KV="`echo $1 | \ - awk '{ tmp = $0; gsub(/^[0-9\.]*/, "", tmp); sub(tmp, ""); print }'`" - echo "${KV}" | awk -- 'BEGIN { FS = "." } { print $3 }' -} - -# int KV_to_int(string) -# -# Convert a string type kernel version (2.4.0) to an int (132096) -# for easy compairing or versions ... -# -KV_to_int() { - [ -z "$1" ] && return 1 - - local KV_MAJOR="`KV_major "$1"`" - local KV_MINOR="`KV_minor "$1"`" - local KV_MICRO="`KV_micro "$1"`" - local KV_int="$((KV_MAJOR * 65536 + KV_MINOR * 256 + KV_MICRO))" - - # We make version 2.2.0 the minimum version we will handle as - # a sanity check ... if its less, we fail ... - if [ "${KV_int}" -ge 131584 ] - then - echo "${KV_int}" - - return 0 - else - return 1 - fi -} - -# int get_KV() -# -# return the kernel version (major, minor and micro concated) as an integer -# -get_KV() { - local KV="`uname -r 2> /dev/null`" - - echo "`KV_to_int ${KV}`" - - return $? -} - -# bool get_bootparam(param) -# -# return 0 if gentoo=param was passed to the kernel -# -# EXAMPLE: if get_bootparam "nodevfs" ; then .... -# -get_bootparam() { - local copt="" - local parms="" - local retval=1 - - for copt in `cat /proc/cmdline` - do - if [ "${copt%=*}" = "gentoo" ] - then - params="`gawk -v PARAMS="${copt##*=}" ' - BEGIN { - split(PARAMS, nodes, ",") - for (x in nodes) - print nodes[x] - }'`" - - # Parse gentoo option - for x in ${params} - do - if [ "${x}" = "$1" ] - then - echo YES - retval=0 - fi - done - fi - done - return ${retval} -} - -# Safer way to list the contents of a directory, -# as it do not have the "empty dir bug". -# -# char *dolisting(param) -# -# print a list of the directory contents -# -# NOTE: quote the params if they contain globs. -# also, error checking is not that extensive ... -# -dolisting() { - local x="" - local y="" - local tmpstr="" - local mylist="" - local mypath="${*}" - - if [ "${mypath%/\*}" != "${mypath}" ] - then - mypath="${mypath%/\*}" - fi - for x in ${mypath} - do - if [ ! -e ${x} ] - then - continue - fi - if [ ! -d ${x} ] && ( [ -L ${x} -o -f ${x} ] ) - then - mylist="${mylist} `ls ${x} 2> /dev/null`" - else - if [ "${x%/}" != "${x}" ] - then - x="${x%/}" - fi - cd ${x} - tmpstr="`ls`" - for y in ${tmpstr} - do - mylist="${mylist} ${x}/${y}" - done - fi - done - echo "${mylist}" -} - -# void save_options(char *option, char *optstring) -# -# save the settings ("optstring") for "option" -# -save_options() { - local myopts="$1" - shift - if [ ! -d ${svcdir}/options/${myservice} ] - then - install -d -m0755 ${svcdir}/options/${myservice} - fi - echo "$*" > ${svcdir}/options/${myservice}/${myopts} -} - -# char *get_options(char *option) -# -# get the "optstring" for "option" that was saved -# by calling the save_options function -# -get_options() { - if [ -f ${svcdir}/options/${myservice}/$1 ] - then - cat ${svcdir}/options/${myservice}/$1 - fi -} - -# Prelim code to add bootsplash support to Gentoo :) -rc_splash() { - test -f /proc/splash || return 0 - if [ -n "`grep 'splash=silent' /proc/cmdline 2>/dev/null`" ]; then - /sbin/splash "$1" - export progress=$(( ${progress} + 1 )) - fi -} - -# Allows us to save variable info between runlevels (ie. rc iterations) -save_splash_info() { - if [ -f /proc/splash ]; then - echo ${sscripts} > ${svcdir}/sscripts.tmp - echo ${progress} > ${svcdir}/progress.tmp - fi -} - -# Retrieve splash state info -get_splash_info() { - if [ -f /proc/splash ]; then - export sscripts=`cat ${svcdir}/sscripts.tmp` - export progress=`cat ${svcdir}/progress.tmp` - fi -} - -# vim:ts=4 diff --git a/src/livecd/profiles/x86/aux-files/hosts b/src/livecd/profiles/x86/aux-files/hosts deleted file mode 100644 index 4da3032548..0000000000 --- a/src/livecd/profiles/x86/aux-files/hosts +++ /dev/null @@ -1,11 +0,0 @@ -# -# hosts This file describes a number of hostname-to-address -# mappings for the TCP/IP subsystem. It is mostly -# used at boot time, when no name servers are running. -# On small systems, this file can be used instead of a -# "named" name server. Just add the names, addresses -# and any aliases to this file... -# - -127.0.0.1 localhost -192.168.1.2 cdimage diff --git a/src/livecd/profiles/x86/aux-files/hotplug b/src/livecd/profiles/x86/aux-files/hotplug deleted file mode 100644 index dddcfb0084..0000000000 --- a/src/livecd/profiles/x86/aux-files/hotplug +++ /dev/null @@ -1,54 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2003 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# /space/gentoo/cvsroot/gentoo-x86/sys-apps/hotplug/files/hotplug.rc,v 1.2 2002/02/25 23:02:14 woodchip Exp - -HILITE="\033[1m" -NORMAL="\033[0m" - -depend() { - need modules -} - -checkconfig() { - if [ ! -d /etc/hotplug ] ; then - eerror "Hotplug requires scripts & configs in /etc/hotplug!" - return 1 - fi -} - -start() { - CMDLINE="`cat /proc/cmdline`" - for x in $CMDLINE - do - if [ "$x" = "nodetect" ] - then - ebegin "Skipping USB and PCI hotplugging (nodetect option)" - return 0 - elif [ "$x" = "nohotplug" ] - then - ebegin "Skipping USB and PCI hotplugging (nohotplug option)" - return 0 - fi - done - local error - checkconfig || return 1 - ebegin "Starting USB and PCI hotplugging" - echo "0" > /proc/sys/kernel/printk - for RC in /etc/hotplug/*.rc - do - $RC start > /dev/null 2>&1 - done - echo "6" > /proc/sys/kernel/printk - eend -} - -stop() { - local error - ebegin "Stopping USB and PCI hotplugging" - for RC in /etc/hotplug/*.rc - do - $RC stop - done - eend -} diff --git a/src/livecd/profiles/x86/aux-files/hwsetup b/src/livecd/profiles/x86/aux-files/hwsetup deleted file mode 100644 index 4afeff44ff..0000000000 --- a/src/livecd/profiles/x86/aux-files/hwsetup +++ /dev/null @@ -1,49 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/x86/aux-files/Attic/hwsetup,v 1.1 2003/10/19 03:10:55 livewire Exp $ - -HILITE="\033[1m" -NORMAL="\033[0m" - -DETECT="yes" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "nodetect" ] - then - DETECT="no" - fi -done - -depend() { - after checkfs - after local -} - -blurb() { - echo -ne ${HILITE}${1} - #blurblen=${#1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} -start() { - ebegin "Hardware detection" - -if [ "$DETECT" = "yes" ] - then - # Disable kernel messages to console: - echo "0" > /proc/sys/kernel/printk - /etc/init.d/autoconfig - eend - fi - -} - -stop() { - return -} - -# vim:ts=4 diff --git a/src/livecd/profiles/x86/aux-files/inittab b/src/livecd/profiles/x86/aux-files/inittab deleted file mode 100644 index 36874fbed2..0000000000 --- a/src/livecd/profiles/x86/aux-files/inittab +++ /dev/null @@ -1,47 +0,0 @@ -# -# inittab This file describes how the INIT process should set up -# the system in a certain run-level. -# -# Author: Miquel van Smoorenburg, <miquels@cistron.nl> -# Modified by: Patrick J. Volkerding, <volkerdi@ftp.cdrom.com> -# Modified by: Daniel Robbins, <drobbins@gentoo.org> -# -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/x86/aux-files/Attic/inittab,v 1.1 2003/10/19 03:10:55 livewire Exp $ - -# -# Default runlevel. - -id:3:initdefault: - -# System initialization (runs when system boots). -#DE:S12345:respawn:/sbin/devfsd /dev -fg -# Script to run when going single user (runlevel 1). -~~:S:wait:/sbin/sulogin - -si:S:sysinit:/sbin/rc sysinit -l0:0:wait:/sbin/rc shutdown -l1:1:wait:/sbin/rc single -l2:2:wait:/sbin/rc nonetwork -l3:3:wait:/sbin/rc default -l4:4:wait:/sbin/rc default -l5:5:wait:/sbin/rc default -l6:6:wait:/sbin/rc reboot -z6:6:respawn:/sbin/sulogin - -# TERMINALS -c1:12345:respawn:/sbin/mingetty --noclear --autologin root tty1 -c2:12345:respawn:/sbin/mingetty --noclear --autologin root tty2 -c3:12345:respawn:/sbin/mingetty --noclear --autologin root tty3 -c4:12345:respawn:/sbin/mingetty --noclear --autologin root tty4 - -# What to do at the "Three Finger Salute". -ca:12345:ctrlaltdel:/sbin/shutdown -r now - -# Used by /etc/init.d/xdm to control DM startup. -# Read the comments in /etc/init.d/xdm for more -# info. Do NOT remove, as this will start nothing -# extra at boot if /etc/init.d/xdm is not added -# to the "default" runlevel. -x:a:once:/etc/X11/startDM.sh - -# End of /etc/inittab diff --git a/src/livecd/profiles/x86/aux-files/install.txt b/src/livecd/profiles/x86/aux-files/install.txt deleted file mode 100644 index c6df3c24af..0000000000 --- a/src/livecd/profiles/x86/aux-files/install.txt +++ /dev/null @@ -1,1482 +0,0 @@ - - Gentoo Linux 1.4_rc2 and 1.4_rc3 Installation Instructions - Contents: - [1. About the Install................................................. - .................] - - 1.About the Install - - This new boot CD will boot from nearly any modern IDE CD-ROM drive, as - well as many SCSI CD-ROM, assuming that your CD-ROM and BIOS both - support booting. Included on the CD-ROM is Linux support for IDE (and - PCI IDE) (built-in to the kernel) as well as support for all SCSI - devices (available as modules.) In addition, we provide modules for - literally every kind of network card that Linux supports, as well as - tools to allow you to configure your network and establish outbound - (as well as inbound) ssh connections and download files. - - To install from the build CD, you will need to have a 486+ processor - and ideally at least 64 Megabytes of RAM. (Gentoo Linux has been - successfully built with 64MB of RAM + 64MB of swap space, but the - build process is awfully slow under those conditions.) - - Gentoo Linux can be installed using one of three "stage" tarball - files. The one you choose depends on how much of the system you want - to compile yourself. The stage1 tarball is used when one wants to - bootstrap and build the entire system from scratch. The stage2 tarball - is used for building the entire system from scratch, except for the - bootstrap part which is already performed for you. And the stage3 - tarball already contains a basic Gentoo Linux system that has been - optimized for your system. - - So, how does one begin the install process? First, you'll want to - decide which one of our LiveCD ISO images to grab from - [3]http://www.ibiblio.org/gentoo/releases/1.4_rc2/x86/. In this - directory, you'll see several subdirectories such as athlon for each - of our various architecture-specific builds. Here's a low-down on each - arch directory and what it contains: - Architecture Description - x86 Stage 1 tarballs and "gentoo-basic" liveCD -- will work on - anything. - i586 Stage 2 and 3 tarballs, GRP packages and liveCD for i586+ CPUs - i686 Stage 2 and 3 tarballs, GRP packages and liveCD for i686+ CPUs - athlon Stage 2 and 3 tarballs, GRP packages and liveCD for AMD Athlon - CPUs - athlon-xp Stage 2 and 3 tarballs, GRP packages and liveCD for AMD - Athlon XP CPUs - athlon-mp Stage 2 and 3 tarballs, GRP packages and liveCD for AMD - Athlon MP CPUs - pentium3 Stage 2 and 3 tarballs, GRP packages and liveCD for Intel - Pentium III and Pentium 4 CPUs - - Inside each of these directories, you'll find a livecd/ directory that - contains LiveCDs. While these LiveCDs will boot on any architecture, - the install-related tarballs are optimized for a particular CPU type - and will not work on all systems, except for the "gentoo-basic" LiveCD - in the x86 directory which can be used to install on anything. - - The LiveCDs are full CD images that should be burned to a CDR or CD-RW - using CD burning software. Currently, we have two types of LiveCDs. - The first carries the "gentoo-basic" label, and is approximately 40MB - in size and lives in the x86/livecd/ directory. This LiveCD is of - minimal size to allow for a initial quick download and contains a - stage1 tarball that can be found in /mnt/cdrom/gentoo/ after the CD - has booted. - - The second flavor of LiveCD we currently offer is labelled - "livecd-grp." These CDs (found in their respective arch/livecd - directories) contain stage1, 2 and 3 tarballs, and also contain a set - of GRP packages optimized for a specific architecture. GRP is simply - precompiled packages for very large applications, such as XFree86. - KDE, GNOME, OpenOffice, etc. Using these LiveCDs, it will be possible - for you to install a fully-functional Gentoo Linux system very - quickly. The downside is that these ISO images are large -- around - 600MB -- so they can take a while to download. - If for some reason your install gets interrupted at some point, you - can reboot and restart. For example, if you have partitioned, - installed the stageX tarball, and are ready to chroot, you can restart - the install if necessary. Just re-boot with the LiveCD, then mount - your drives/partitions to /mnt as normal. Basically, you can do this - at about any point during the install, just not before partitioning - for obvious reasons. - - Warning: If you encounter a problem with any part of the install and - wish to report it as a bug, report it to [4]http://bugs.gentoo.org. If - the bug needs to be moved upstream to the package maintainers (ie KDE) - the developers will take care of that. - - Now, let's quickly review the install process. First, we'll download, - burn and boot a LiveCD. After getting a root prompt, we'll create - partitions, create our filesystems, and extract either a stage1, - stage2 or stage3 tarball. If we are using a stage1 or stage2 tarball, - we will take the appropriate steps to get our systems to stage3. Once - our systems are at stage3, we can configure them (tweaking config - files, installing a bootloader, etc) and boot them and have a - fully-functional Gentoo Linux system. Depending on what stage of the - build process you're starting from, here's what's required for - installation: - stage tarball requirements for installation - 1 partition/filesystem setup, emerge sync, bootstrap, emerge system, - emerge linux sources, final configuration - 2 partition/filesystem setup, emerge sync, emerge system, emerge linux - sources, final configuration - 3 partition/filesystem setup, emerge sync, final configuration - - 2.Booting - - Start by booting the LiveCD. If detected properly, you should see a - fancy boot screen with the Gentoo Linux logo on it. At this screen, - you can hit Enter to begin the boot process, hit F2 for help, or pass - kernel boot options by typing gentoo opt1 opt2, etc. Once you hit - Enter, you'll be greeted with a lot of text output followed by the - normal Gentoo Linux boot sequence. You will be automatically logged in - as "root" and the root password will be set to a random string for - security purposes. You should have a root ("#") prompt on the current - console, and can also open new root consoles by pressing Alt-F2, - Alt-F3 and Alt-F4. Get back to the one you started on by pressing (you - guessed it) Alt-F1. - - You've probably also noticed that above your # prompt is a bunch of - help text explaining how to do things like configure your network - devices and where you can find the Gentoo Linux stage tarballs and - packages on your CD. - - 3.Load Kernel Modules - - If the PCI autodetection missed some of your hardware, you will have - to load the appropriate modules manually. To view a list of all - available network card modules, type ls - /lib/modules/*/kernel/drivers/net/*. To load a particular module, - type: - - Code listing 3.1: PCI Modules Configuration -# modprobe pcnet32 -(replace pcnet32 with your NIC module) - - Now, if you want to be able to access any SCSI hardware that wasn't - detected during the initial boot autodetection process, you'll need to - load the appropriate modules from /lib/modules, again using modprobe: - - Code listing 3.2: Loading SCSI Modules -# modprobe aic7xxx -# modprobe sd_mod - - aic7xxx supports your SCSI controller and sd_mod supports SCSI hard - disks. - - Note: Support for a SCSI CD-ROMs and disks are built-in in the kernel. - - If you are using hardware RAID, you'll need to load the ATA-RAID - modules for your RAID controller. - - Code listing 3.3: Loading RAID Modules - -# modprobe ataraid -# modprobe pdcraid - (Promise Raid Controller) -# modprobe hptraid - (Highpoint Raid Controller) - - The Gentoo LiveCD should have enabled DMA on your disks, but if it did - not, hdparm can be used to set DMA on your drives. - - Code listing 3.4: Setting DMA -Replace hdX with your disk device. -# hdparm -d 1 /dev/hdX Enables DMA -# hdparm -d1 -A1 -m16 -u1 -a64 /dev/hdX Enables DMA and other safe performance- -enhancing options -# hdparm -X66 /dev/hdX Force-enables Ultra-DMA -- dangerous -- may cause some d -rives to mess up - - 4.Loading PCMCIA Kernel Modules - - If you have a PCMCIA network card, you will need to do some additional - trickery. - - Warning: To avoid problems with cardmgr, you must run it before you - enter the chroot portion of the install. - - Code listing 4.1: Loading PCMCIA Modules -# modprobe pcmcia_core -# modprobe i82365 -# modprobe ds -# cardmgr -f - - As cardmgr detects which hardware is present, your speaker should emit - a few reassuring beeps, and your PCMCIA network card should hum to - life. You can of course insert the PCMCIA card after loading cardmgr - too, if that's preferable. (Technically, you need not run cardmgr if - you know exactly which module your PCMCIA card requires. But if you - don't, loading all PCMCIA modules and see which sticks won't work, as - all PCMCIA modules load obligingly and hang around for a PCMCIA card - to drop by. cardmgr will also unload the module(s) for any card when - you remove it). - - 5.Configuring Networking - - PPPoE configuration - - Assuming you need PPPoE to connect to the internet, the livecd (any - version) has made things easy for you by including rp-pppoe. Use the - provided adsl-setup script to configure your connection. You will be - prompted for the ethernet device that is connected to your adsl modem, - your username and password, the IPs of your DNS servers, and if you - need a basic firewall or not. - - Code listing 5.1: Configuring PPPoE -# adsl-setup -# adsl-start - - If something goes wrong, double-check that you correctly typed your - username and password by looking at /etc/ppp/pap-secrets or - /etc/ppp/chap-secrets, and make sure you are using the right ethernet - device. - - Automatic Network Configuration - - The Gentoo Linux install lets you configure a working network, - allowing you to use ssh, scp, lynx, irssi or wget as needed before - even beginning the installation process. Even if you don't need to do - these things now, you should go ahead and set up networking now. Once - networking is up, Portage will be able to use your configured network - once you are inside the chroot environment (required for installing - Gentoo Linux). The simplest way to set up networking is to run our new - net-setup script. - - Code listing 5.2: Net-Setup Script - # net-setup eth0 - - Of course, if you prefer, you may still set up networking manually. - - Manual DHCP Configuration - - Network configuration is simple with DHCP; If your ISP is not using - DHCP, skip down to the static configuration section below. - - Code listing 5.3: Network configuration with DHCP - # dhcpcd eth0 - - Note: Some ISPs require you to provide a hostname. To do that, add a - -h myhostname flag to the dhcpcd command line above. - - If you receive dhcpConfig warnings, don't panic; the errors are most - likely cosmetic. Skip down to Network testing below. - - Manual Static Configuration - - We need to setup just enough networking so that we can download - sources for the system build, as well as the required localhost - interface. Type in the following commands, replacing $IFACE with your - network interface (typically eth0), $IPNUM with your IP address, - $BCAST with your broadcast address, and $NMASK with your network mask. - For the route command, replace $GTWAY with your default gateway. - - Code listing 5.4: Static IP Network Configuration -# ifconfig $IFACE $IPNUM broadcast $BCAST netmask $NMASK -# /sbin/route add -net default gw $GTWAY netmask 0.0.0.0 metric 1 - - Now it's time to create the /etc/resolv.conf file so that name - resolution (finding Web/FTP sites by name, rather than just by IP - address) will work. - - Here's a template to follow for creating your /etc/resolv.conf file: - - Code listing 5.5: /etc/resolv.conf template -domain mydomain.com -nameserver 10.0.0.1 -nameserver 10.0.0.2 - - Replace 10.0.0.1 and 10.0.0.2 with the IP addresses of your primary - and secondary DNS servers respectively. - - Proxy Configuration - - If you are behind a proxy, it is necessary to configure your proxy - before you continue. We will export some variables to set up the proxy - accordingly. - - Code listing 5.6: Setting a Proxy -# export http_proxy="machine.company.com:1234" -# export ftp_proxy="$http_proxy" -# export RSYNC_PROXY="$http_proxy" - - Network Testing - - Now that your network has been configured, the /sbin/ifconfig -a - command should show that your network card is working (look for UP and - RUNNING in the output). - - Code listing 5.7: /sbin/ifconfig for a working network card -eth0 Link encap:Ethernet HWaddr 00:50:BA:8F:61:7A - inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0 - inet6 addr: fe80::50:ba8f:617a/10 Scope:Link - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:1498792 errors:0 dropped:0 overruns:0 frame:0 - TX packets:1284980 errors:0 dropped:0 overruns:0 carrier:0 - collisions:1984 txqueuelen:100 - RX bytes:485691215 (463.1 Mb) TX bytes:123951388 (118.2 Mb) - Interrupt:11 - - You may want to also try pinging your ISP's DNS server (found in - /etc/resolv.conf), and a website of choice, just to make sure that - your packets are reaching the net, DNS name resolution is working - correctly, etc. - - Code listing 5.8: Further Network Testing - # ping www.some_website.com - - Networking is go! - - Networking should now be configured and useable. You should be able to - use the included ssh, scp, lynx, irssi and wget commands to connect to - other machines on your LAN or the Internet. - - 6.Partition Configuration - - Now that the kernel can see the network card and disk controllers, - it's time to set up disk partitions for Gentoo Linux. - - Here's a quick overview of the standard Gentoo Linux partition layout. - We're going to create at least three partitions: a swap partition, a - root partition (to hold the bulk of Gentoo Linux), and a special boot - partition. The boot partition is designed to hold the GRUB or LILO - boot loader information as well as your Linux kernel(s). The boot - partition gives us a safe place to store everything related to booting - Linux. During normal day-to-day Gentoo Linux use, your boot partition - should remain unmounted. This prevents your kernel from being made - unavailable to GRUB (due to filesystem corruption) in the event of a - system crash, preventing the chicken-and-egg problem where GRUB can't - read your kernel (since your filesystem isn't consistent) but you - can't bring your filesystem back to a consistent state (since you - can't boot!) - - Now, on to filesystem types. Right now, you have five filesystem - options: XFS, ext2, ext3 (journaling), jfs, and ReiserFS. ext2 is the - tried and true Linux filesystem but doesn't have metadata journaling. - ext3 is the new version of ext2 with both metadata journaling and - ordered data writes, effectively providing data journaling as well. - ReiserFS is a B*-tree based filesystem that has very good small file - performance, and greatly outperforms both ext2 and ext3 when dealing - with small files (files less than 4k), often by a factor of 10x-15x. - ReiserFS also scales extremely well and has metadata journaling. As of - kernel 2.4.18+, ReiserFS is finally rock-solid and highly recommended. - XFS is a filesystem with metadata journaling that is fully supported - under Gentoo Linux's xfs-sources kernel, but is generally not - recommended due to its tendency to lose recently-modified data if your - system locks up or unexpectedly reboots (due to a power failure, for - instance.) Finially, jfs is IBM's own high performance journaling - filesystem. Since it is obscure, we cannot comment either positvely - nor negatively on its stability. - - If you're looking for the most standard filesystem, use ext2. If - you're looking for the most rugged journalled filesystem, use ext3. If - you're looking for a high-performance filesystem with journaling - support, use ReiserFS; both ext3 and ReiserFS are mature and refined. - Here are our basic recommended filesystem sizes and types: - Partition Size Type example device - boot partition, containing kernel(s) and boot information 100 - Megabytes ext2/3 highly recommended (easiest); if ReiserFS then mount - with -o notail /dev/hda1 - swap partition (no longer a 128 Megabyte limit) Generally, unless you - are running a server, swapspace can be pretty flexible. Please consult - the below table for some loose guidelines on swap space. Linux swap - /dev/hda2 - root partition, containing main filesystem (/usr, /home, etc) >=1.5 - Gigabytes ReiserFS, ext3 recommended; ext2 ok /dev/hda3 - Physical RAM Swapspace Size - 0-48MB RAM 048-064MB RAM 064MB-128MB RAM 128-256MB RAM 256-512MB RAM - 720MB 702MB 640MB 256MB - - Before creating filesystems, you may want to initialize the beginning - of your HD using dd. Doing this will ensure that your new filesystem - will not be mis-indentified by Linux's mounting code. This can be done - as follows: - - Code listing 6.1: Initializing first 1024 Sectors of HD -# dd if=/dev/zero of=/dev/hdxy bs=1K count=1 -Replace /dev/hdxy with the device you wish to "clean." - - Warning: The command above will destroy all data from /dev/hdxy. Be - careful and check twice which partition you specify for zeroing. If - you make a mistake it might result in a loss of data. - - At this point, create your partitions using fdisk. Note that your - partitions should be of type 82 if swap and 83 for regular filesystems - (whether ReiserFS, ext2/3 or other). - - Note: cfdisk is included on the install CD, and it is considerably - easier to use than fdisk. Just type cfdisk to run it; by default, - cfdisk will work with /dev/hda. If /dev/hda is not the hard disk you - want to partition, give the right value to cfdisk as a parameter. For - example: cfdisk /dev/hde - - Note: If fdisk or cfdisk instruct you to do so, please reboot to allow - your system to detect the new partition configuration. - - Note: If you are using RAID your partitions will be a little - different. You will have the partitions like this: - /dev/ataraid/discX/partY X is the arrays you have made, so if you only - have made 1 array, then it will be disc0.Y is the partition number as - in /dev/hdaY - - Once you've created your partitions, it's time to initialize the - filesystems that will be used to house our data. Initialize swap as - follows: - - Code listing 6.2: Initializing Swap - # mkswap /dev/hda2 - - You can use the mke2fs command to create ext2 filesystems. - - Code listing 6.3: Creating an ext2 Filesystem - # mke2fs /dev/hda1 - - To create an XFS filesystem, use the mkfs.xfs command. - - Code listing 6.4: Creating a XFS Filesystem - # mkfs.xfs /dev/hda3 - - Note: You may want to add a couple of additional flags to the mkfs.xfs - command: -d agcount=3 -l size=32m. The -d agcount=3 command will lower - the number of allocation groups. XFS will insist on using at least 1 - allocation group per 4 GB of your partition, so, for example, if you - hava a 20 GB partition you will need a minimum agcount of 5. The -l - size=32m command increases the journal size to 32 Mb, increasing - performance. - - Warning: If you are installing an XFS partition over a previous - ReiserFS partition, later attempts to mount may fail without an - explicit mount -t xfs. The solution is to zero out the partition - before creating the XFS filesystem: dd if=/dev/zero of=/dev/hdx bs=1k. - - If you'd like to use ext3, you can create ext3 filesystems using - mke2fs -j. - - Code listing 6.5: Creating an ext3 Filesystem - # mke2fs -j /dev/hda3 - - Note: You can find out more about using ext3 under Linux 2.4 at - [5]http://www.zip.com.au/~akpm/linux/ext3/ext3-usage.html. - - To create ReiserFS filesystems, use the mkreiserfs command. - - Code listing 6.6: Creating a ReiserFS Filesystem - # mkreiserfs /dev/hda3 - - To create JFS filesystems, use the mkfs.jfs comamnd. - - Code listing 6.7: Creating a JFS Filesystem - # mkfs.jfs /dev/hda3 - - 7.Mount Partitions - - Now, we'll activate our new swap, since we may need the additional - virtual memory that provides later: - - Code listing 7.1: Activating Swap - # swapon /dev/hda2 - - Next, we'll create the /mnt/gentoo and /mnt/gentoo/boot mountpoints, - and we'll mount our filesystems to these mountpoints. - - Code listing 7.2: Creating Mount Points -# mkdir /mnt/gentoo -# mount /dev/hda3 /mnt/gentoo -# mkdir /mnt/gentoo/boot -# mount /dev/hda1 /mnt/gentoo/boot - - If you are setting up Gentoo Linux with a separate /usr or /var, these - would get mounted to /mnt/gentoo/usr and /mnt/gentoo/var, - respectively. - - Important: If your boot partition (the one holding the kernel) is - ReiserFS, be sure to mount it with the -o notail option so GRUB gets - properly installed. Make sure that notail ends up in your new - /etc/fstab boot partition entry, too. We'll get to that in a bit. - - Important: If you are having problems mounting your boot partition - with ext2, try using mount /dev/hXX /mnt/gentoo/boot -t ext2 - - 8.Obtaining the Desired 'stage-x' Tarball - - If you are using a GRP CD to install, you already have all of the - stage tarballs available on the CD. If this is the case, copy the - tarball of your choice to /mnt/gentoo - - Alternatively, if you do not have a GRP CD, the stage1 tarball is - still available on the CD in /mnt/cdrom/gentoo. You will have to - download the other stages though, and the best place to download those - to is /mnt/gentoo. - - Code listing 8.1: Downloading Required Stages -# cd /mnt/gentoo -Use lynx to get the URL for your tarball: -# lynx http://www.ibiblio.org/pub/Linux/distributions/gentoo/releases/1.4_rc2/x -86/ -Use Up and Down arrows keys (or the TAB key) to go to the right directory -Highlight the appropriate stage you want to download -Press d which will initiate the download -Save the file and quit the browser - -OR use wget from the command line: -# wget insert URL to the required stage tarball here. - - 9.Unpacking the Stage Tarballs - - Now it's time to extract the compressed stage tarball of your choice - to /mnt/gentoo. Then, we'll chroot over to the new Gentoo Linux build - installation to "enter" the new Gentoo Linux system. - - Important: Be sure to use the p option with tar. Forgetting to do this - will cause certain files to have incorrect permissions. - - If you are using the "from scratch, build everything" install method, - you will want to use the stage1-ix86-1.4_beta.tbz2 image. If you're - using one of our bigger CDs, you'll also have a choice of a stage2 and - stage3 image. These images allow you to save time at the expense of - configurability (we've already chosen compiler optimizations and - default USE variables for you.) - - Code listing 9.1: Unpacking the Stages -# cd /mnt/gentoo -# tar -xvjpf /mnt/cdrom/gentoo/stage?-*.tbz2 -# mount -o bind /proc /mnt/gentoo/proc - - -# cp /etc/resolv.conf /mnt/gentoo/etc/resolv.conf - - If you are going to use GRP, now would be a good time to execute the - following commands: - - Code listing 9.2: Getting ready for GRP -# mkdir /mnt/gentoo/GRP -# mount -o bind /mnt/cdrom/gentoo/packages /mnt/gentoo/GRP - - Code listing 9.3: Entering the chroot Environment -# chroot /mnt/gentoo /bin/bash -# env-update -Regenerating /etc/ld.so.cache... -# source /etc/profile -The above points your shell to the new paths and updated binaries. - - After you execute these commands, you'll be "inside" your new Gentoo - Linux environment. - - 10.Getting the Current Portage Tree using Rsync - - Now, you'll need to run emerge sync. This will make sure that you have - the most current copy of the Portage tree. - - Code listing 10.1: Updating Using Rsync - -# emerge sync -# export CONFIG_PROTECT="-*" -# export USE="-* bootstrap build" -# emerge portage -# unset USE - - The Portage tree will be downloaded and stored in /usr/portage; it's - about 90Mb in size without tarballs. - - Note: The export CONFIG_PROTECT="-*" line ensures that any new scripts - installed to /etc will overwrite the old scripts (stored in - sys-apps/baselayout), bypassing Portage's new config file management - support. Type emerge --help config for more details. - - 11.Setting Gentoo optimizations (make.conf) - - Now that you have a working copy of the Portage tree, people using - stage1 to install will need to bootstrap their Gentoo Linux system as - follows. First edit the file /etc/make.conf. In this file, you should - set your USE flags, which specify optional functionality that you - would like to be built into packages; generally, the defaults (an - empty or unset USE variable) are fine. More information on USE flags - can be found [6]here. A complete list of current USE flags can be - found [7]here. - - You also should set appropriate CHOST, CFLAGS and CXXFLAGS settings - for the kind of system that you are creating (commented examples can - be found further down in the file.) Your best friend is man gcc to - figure out what additional CFLAGS and CXXFLAGS are available. Search - for 'Optimization'. - - If necessary, you can also set proxy information here if you are - behind a firewall. - - Code listing 11.1: Setting make.conf Options - # nano -w /etc/make.conf (Adjust these settings) - - Note: People who need to substantially tweak the build process should - take a look at the /etc/make.globals file. This file comprises gentoo - defaults and should never be touched. If the defaults do not suffice, - then new values should be put in /etc/make.conf, as entries in - make.conf override the entries in make.globals. If you're interested - in tweaking USE settings, look in /etc/make.profile/make.defaults. If - you want to turn off any USE settings found here, add an appropriate - USE="-foo" in /etc/make.conf (to turn off the foo USE setting.) - - 12.Starting from Stage1 - - The stage1 tarball is for ultimate tweakage. If you have picked this - tarball, you are most likely looking to have an uber-optimized system. - Have fun, because optimization is what Gentoo Linux is all about! - - Now, it's time to start the "bootstrap" process. This process takes - about two hours on my 1200Mhz AMD Athlon system. During this time, the - extracted build image will be prepped for compiling the rest of the - system. The GNU compiler suite will be built, as well as the GNU C - library. These are time consuming builds and make up the bulk of the - bootstrap process. - - Code listing 12.1: Bootstrapping -# cd /usr/portage -# scripts/bootstrap.sh - - The "bootstrap" process will now begin. - - Note: Portage by default uses /var/tmp during package building, often - using several hundred megabytes of temporary storage. If you would - like to change where Portage stores these temporary files, set a new - PORTAGE_TMPDIR before starting the bootstrap process, as follows: - - Code listing 12.2: Changing Portage's Storage Path - # export PORTAGE_TMPDIR="/otherdir/tmp" - - bootstrap.sh will build binutils, gcc, gettext, and glibc, rebuilding - binutils, gcc, and gettext after glibc. Needless to say, this process - takes a while. Have a nice nap. Once this process completes, your - system will be equivalent to a "stage2" system, which means you can - now move on to the stage2 instructions. - - 13.Starting from Stage2 - - The stage2 tarball already has the bootstrapping done for you. All - that you have to do is install the rest of the system. - - Note: If you haven't done so, please edit /etc/make.conf to your - flavor. - - Code listing 13.1: Installing the Rest of the System -# emerge -p system - [lists the packages to be installed] -# emerge system - - It's going to take a while to finish building the entire base system. - Your reward is that it will be thoroughly optimized for your system. - The drawback is that you have to find a way to keep yourself occupied - for some time to come. The author suggests "Star Wars - Super Bombad - Racing" for the PS2. - - When this process completes, your system will be the equivalent of a - stage3 system. You have a couple of choices on how to continue at this - point. You can move onto the stage3 instructions and complete those. - Doing that will get your system right up to date with what is in the - current Portage tree. This is not necessary, but it is highly - recommended. If you do not choose to get up to date with the stage3 - instructions, you can move onto the GRP install section. If you do not - wish to use GRP, you can move onto [8]Chapter 16: Final Steps. - - 14.Starting from Stage3 - - The stage3 tarball is already configured for your system. There is not - much to do for this stage, but it is a very good idea to update your - system to the newest available packages. - - Note: If you have not already edited /etc/make.conf to fit your - specifications, now would be a good time to do so. - - Code listing 14.1: Getting up-to-date - # emerge sync - # emerge -up world - lists [packages] to be installed - # emerge -u world - - Once you complete this step, you have some options on how to continue. - If you are going to be using GRP, please move onto the GRP section. If - you are not going to use GRP, you may continue onto [9]Chapter 16: - Final Steps. - - 15.Using GRP - - You can take advantage of pre-built GRP package sets to avoid - compiling certain popular and large packages. Currently, we provide - full builds of everything you need for openoffice-bin, GNOME, KDE and - xfree. - - First, you will need to cd to the location of the packages directory. - We have already mounted the directory at /GRP. In that directory you - will find the grp-install.sh script, an All directory that contains - all of the binary packages, and a list of available GRP packages. To - install any/all of these package sets you should do the following: - - Code listing 15.1: Using GRP -# cd /GRP -# sh grp-install.sh <list of package lists> -where <list of package lists> may be any of the *-list.txt files found in the s -ame directory. - - grp-install.sh can be run multiple times without replacing existing - installations. You can do a sh grp-install.sh for a basic usage - description if you are still a bit foggy. - - 16.Setting your Timezone - - At this point, you should have system that's ready for final - configuration. We'll start the configuration process by setting the - timezone. By setting the timezone before building the kernel we ensure - that users get reasonable uname -a output. - - Look for your timezone (or GMT if you using Greenwich Mean Time) in - /usr/share/zoneinfo. Then, make a symbolic link by typing: - - Code listing 16.1: Creating a symbolic link for timezome - # ln -sf /usr/share/zoneinfo/path/to/timezonefile /etc/localtime - - You might also want to check /etc/rc.conf to make sure your timezone - settings are correct. - - 17.Installing the kernel and a System Logger - - Note: If you haven't done so, please edit /etc/make.conf to your - flavor. - - You now need to merge Linux source ebuilds. Here are the ones we - currently offer: - ebuild description - gentoo-sources Our own performance and functionality-enhanced kernel - does not include XFS support. - xfs-sources Highly-compatible kernel with XFS support. - openmosix-sources A stock Linux kernel source tree patched with - support for the GPL [10]openMosix load-balancing/clustering technology - usermode-sources A stock Linux kernel source tree patched with support - for User-Mode Linux. ("Linux inside Linux" technology) - vanilla-sources A stock Linux kernel source tree, just like you'd get - from kernel.org - - Warning: If you are configuring your own kernel, be careful with the - grsecurity option. Being too aggressive with your security settings - can cause certain programs (such as X) to not run properly. If in - doubt, leave it out. - - Choose a kernel and then merge as follows: - - Code listing 17.1: Emerging Kernel Sources - # emerge sys-kernel/gentoo-sources - - Once you have a Linux kernel source tree available, it's time to - compile your own custom kernel. - - Please note that /usr/src/linux is a symlink to your current emerged - kernel source package, which is set automatically by Portage at emerge - time. If you have multiple kernel source packages, it is necessary to - set the /usr/src/linux symlink to the correct one before proceeding. - - Code listing 17.2: Compiling the Linux Kernel -# cd /usr/src/linux -# source /etc/profile -Again, this updates your paths. If you get an error saying gcc is not found, -this is what you may have to do. -# make menuconfig -# make dep && make clean bzImage modules modules_install -# mv /boot/bzImage /boot/bzImage.orig -[if bzImage already exists] -# cp /usr/src/linux/arch/i386/boot/bzImage /boot - - Warning: For your kernel to function properly, there are several - options that you will need to ensure are in the kernel proper -- that - is, they should be enabled and not compiled as modules. You will need - to enable the "Code maturity level options --> Prompt for development - and/or incomplete code/drivers" option to see several of these - selections. Under the "File systems" section, be sure to enable the - "/dev" file system support (note that you don't need to enable the - "/dev/pts file system support" option). You'll also need to enable the - "Virtual Memory Filesystem". Be sure to enable "ReiserFS" if you have - any ReiserFS partitions; the same goes for "Ext3". If you're using - XFS, enable the "SGI XFS filesystem support" option. It's always a - good idea to leave ext2 enabled whether you are using it or not. Also, - most people using IDE hard drives will want to enable the "USE DMA by - default" option; otherwise, your IDE drives may perform very poorly. - Of course, remember to enable "IDE disk" support as well -- otherwise - your kernel won't be able to see your IDE disks. - - If you are using hardware RAID you will need to enable a couple more - options in the kernel: For Highpoint RAID controllers select hpt366 - chipset support, support for IDE RAID controllers and Highpoint 370 - software RAID.For Promise RAID controllers select PROMISE - PDC202{46|62|65|67|68|69|70} support, support for IDE RAID controllers - and Support Promise software RAID (Fasttrak(tm)) - - If you use PPPoE to connect to Internet, you will need the following - options in the kernel (built-in or as preferably as modules) : "PPP - (point-to-point protocol) support", "PPP support for async serial - ports", "PPP support for sync tty ports". The two compression options - won't harm but are not definitely needed, neither does the "PPP over - Ethernet" option, that might only be used by rp-pppoe when configured - to do kernel mode PPPoE. - - If you have an IDE cd burner, then you need to enable SCSI emulation - in the kernel. Turn on "ATA/IDE/MFM/RLL support" ---> "IDE, ATA and - ATAPI Block devices" ---> "SCSI emulation support" (I usually make it - a module), then under "SCSI support" enable "SCSI support", "SCSI - CD-ROM support" and "SCSI generic support" (again, I usually compile - them as modules). If you also choose to use modules, then echo -e - "ide-scsi\nsg\nsr_mod" >> /etc/modules.autoload to have them - automatically added at boot time. - - Note: For those who prefer it, it is now possible to install Gentoo - Linux with a 2.2 kernel. However, doing this comes at a price: you - will lose many of the nifty features that are new to the 2.4 series - kernels (such as XFS and tmpfs filesystems, iptables, and more), - although the 2.2 kernel sources can be patched with ReiserFS and devfs - support. Gentoo linux boot scripts require either tmpfs or ramdisk - support in the kernel, so 2.2 kernel users need to make sure that - ramdisk support is compiled in (ie, not a module). It is vital that a - gentoo=notmpfs flag be added to the kernel line in - /boot/grub/grub.conf for the 2.2 kernel so that a ramdisk is mounted - for the bootscripts instead of tmpfs. If you choose not to use devfs, - then gentoo=notmpfs,nodevfs should be used instead. - - Your new custom kernel (and modules) are now installed. Now you need - to choose a system logger that you would like to install. We offer - sysklogd, which is the traditional set of system logging daemons. We - also have msyslog and syslog-ng as well as metalog. Power users seem - to gravitate away from sysklogd (not very good performance) and - towards the newer alternatives. If in doubt, you may want to try - metalog, since it seems to be quite popular. To merge your logger of - choice, type one of the next four lines: - - Code listing 17.3: Emerging System Logger of Choice -# emerge app-admin/sysklogd -# rc-update add sysklogd default -or -# emerge app-admin/syslog-ng -# rc-update add syslog-ng default -or -# emerge app-admin/metalog -# rc-update add metalog default -or -# emerge app-admin/msyslog -# rc-update add msyslog default - - Warning: In the case of syslog-ng you need to create - /etc/syslog-ng/syslog-ng.conf. See /etc/syslog-ng for a sample - configuration file. - - Important: Metalog flushes output to the disk in blocks, so messages - aren't immediately recorded into the system logs. If you are trying to - debug a daemon, this performance-enhancing behavior is less than - helpful. When your Gentoo Linux system is up and running, you can send - metalog a USR1 signal to temporarily turn off this message buffering - (meaning that tail -f /var/log/everything/current will now work in - real time, as expected), and a USR2 signal to turn buffering back on - again. If you want to disable buffering permanently, you can change - METALOG_OPTS="-B" to METALOG_OPTS="-B -s" in /etc/conf.d/metalog. - - Now, you may optionally choose a cron package that you'd like to use. - Right now, we offer dcron, fcron and vcron. If you don't know which - one to choose, you might as well grab vcron. They can be installed as - follows: - - Code listing 17.4: Choosing a CRON Daemon -# emerge sys-apps/dcron -# crontab /etc/crontab -or -# emerge sys-apps/fcron -# crontab /etc/crontab -or -# emerge sys-apps/vcron -You do not need to run crontab /etc/crontab if using vcron. -Don't forget to add your *cron to the proper init level. -# rc-update add *cron default - - For more information on starting programs and daemons at startup, see - the [11]rc-script guide. - - 18.Installing miscellany necessary packages - - If you need rp-pppoe to connect to the net, be aware that at this - point it has not been installed. It would be the good time to do it. - - Code listing 18.1: Installing rp-pppoe - # USE="-X" emerge rp-pppoe - - Note: The USE="-X" prevents pppoe from installing its optional X - interface, which is a good thing, because X and its dependencies would - also be emerged. You can always recompile rp-pppoe with X support - later. - - Note: Please note that the rp-pppoe is built but not configured. You - will have to do it again using adsl-setup when you boot into your - Gentoo system for the first time. - - You may need to install some additional packages in the Portage tree - if you are using any optional features like XFS, ReiserFS or LVM. If - you're using XFS, you should emerge the xfsprogs package: - - Code listing 18.2: Emerging Filesystem Tools -# emerge sys-apps/xfsprogs -If you'd like to use ReiserFS, you should emerge the ReiserFS tools: -# emerge sys-apps/reiserfsprogs -If you'd like to use JFS, you should emerge the JFS tools: -# emerge jfsutils -If you're using LVM, you should emerge the lvm-user package: -# emerge sys-apps/lvm-user - - If you're a laptop user and wish to use your PCMCIA slots on your - first real reboot, you'll want to make sure you install the pcmcia-cs - package. - - Code listing 18.3: Emerging PCMCIA-cs - # emerge sys-apps/pcmcia-cs - - Warning: You will have to re-emerge pcmcia-cs after installation to - get PCMCIA to work. - - 19.Modifying /etc/fstab for your machine - - Your Gentoo Linux system is almost ready for use. All we need to do - now is configure a few important system files and install the GRUB - boot loader. The first file we need to configure is /etc/fstab. - Remember that you should use the notail option for your boot partition - if you chose to create a ReiserFS filesystem on it. Remember to - specify ext2, ext3 or reiserfs filesystem types as appropriate. - - Use something like the /etc/fstab listed below, but of course be sure - to replace "BOOT", "ROOT" and "SWAP" with the actual block devices you - are using (such as hda1, etc.) - - Code listing 19.1: Editing fstab -# /etc/fstab: static file system information. -# -# noatime turns off atimes for increased performance (atimes normally aren't -# needed; notail increases performance of ReiserFS (at the expense of storage -# efficiency). It's safe to drop the noatime options if you want and to -# switch between notail and tail freely. - -# <fs> <mountpoint> <type> <opts> <dump/pass> - -# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts. - -/dev/BOOT /boot ext2 noauto,noatime 1 2 -/dev/ROOT / ext3 noatime 0 1 -/dev/SWAP none swap sw 0 0 -/dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,ro 0 0 -proc /proc proc defaults 0 0 - - Warning: Please notice that /boot is NOT mounted at boottime. This is - to protect the data in /boot from corruption. If you need to access - /boot, please mount it! - - 20.Setting the Root Password - - Before you forget, set the root password by typing: - - Code listing 20.1: Setting the root Password - # passwd - - You will also want to add a non-root user for everyday use. Please - consult the [12]Gentoo FAQ. - - 21.Setting your Hostname - - Edit this file so that it contains your fully-qualified domain name on - a single line, i.e. mymachine.mydomain.com. - - Code listing 21.1: Configuring Hostname - # echo mymachine.mydomain.com > /etc/hostname - - 22.Modifying /etc/hosts - - This file contains a list of ip addresses and their associated - hostnames. It's used by the system to resolve the IP addresses of any - hostnames that may not be in your nameservers. Here's a template for - this file: - - Code listing 22.1: Hosts Template -127.0.0.1 localhost -# the next line contains your IP for your local LAN, and your associated machin -e name -192.168.1.1 mymachine.mydomain.com mymachine - - Note: If you are on a DHCP network, it might be helpful to set - localhost to your machine's actual hostname. This will help GNOME and - many other programs in name resolution. - - 23.Final Network Configuration - - Add the names of any modules that are necessary for the proper - functioning of your system to /etc/modules.autoload file (you can also - add any options you need to the same line.) When Gentoo Linux boots, - these modules will be automatically loaded. Of particular importance - is your ethernet card module, if you happened to compile it as a - module: - - Code listing 23.1: /etc/modules.autoload -This is assuming that you are using a 3com card. - Check /lib/modules/`uname -r`/kernel/drivers/net for your card. - -3c59x - - Edit the /etc/conf.d/net script to get your network configured for - your first boot: - - Code listing 23.2: Boottime Network Configuration -# nano -w /etc/conf.d/net -# rc-update add net.eth0 default - - If you have multiple network cards you need to create additional - net.ethx scripts for each one (x = 1, 2, ...): - - Code listing 23.3: Multiple Network Interfaces -# cd /etc/init.d -# cp net.eth0 net.ethx -# rc-update add net.ethx default - - If you have a PCMCIA card installed, have a quick look into - /etc/init.d/pcmcia to verify that things seem all right for your - setup, then add this line to the top of /etc/init.d/net.ethx: - - Code listing 23.4: PCMCIA depend in /etc/init.d/net.ethx -depend() { - need pcmcia -} - - This makes sure that the PCMCIA drivers are autoloaded whenever your - network is loaded. - - 24.Final steps: Configure Basic Settings (including the international - keymap setting) - - Code listing 24.1: Basic Configuration - # nano -w /etc/rc.conf - - Follow the directions in the file to configure the basic settings. All - users will want to make sure that CLOCK is set to his/her liking. - International keyboard users will want to set the KEYMAP variable - (browse /usr/share/keymaps to see the various possibilities). - - 25.Configure a Bootloader - - Notes - - In the spirit of Gentoo, users now have more than one bootloader to - choose from. Using our virtual package system, users are now able to - choose between both GRUB and LILO as their bootloaders. - - Please keep in mind that having both bootloaders installed is not - necessary. In fact, it can be a hinderance, so please only choose one. - - Important: If you are installing Gentoo Linux on a system with an - NVIDIA nForce or nForce2 chipset with an integrated GeForce graphics - card, you should use LILO and avoid GRUB. With on-board video enabled, - the low memory area of your RAM is used as video RAM. Since GRUB also - uses low memory at boot time, it will experience an "out of memory" - condition. So, if you have an nForce or potentially other board with - on-board video, use LILO. Even if you're using off-board video right - now, it'd be nice to be able to remove the graphics card and use the - on-board video in a pinch, wouldn't it? :) - - Configuring GRUB - - The most critical part of understanding GRUB is getting comfortable - with how GRUB refers to hard drives and partitions. Your Linux - partition /dev/hda1 is called (hd0,0) under GRUB. Notice the - parenthesis around the hd0,0 - they are required. Hard drives count - from zero rather than "a", and partitions start at zero rather than - one. Be aware too that with the hd devices, only harddrives are - counted, not atapi-ide devices such as cdrom players, burners, and - that the same construct can be used with scsi drives. (Normally they - get higher numbers than ide drives except when the bios is configured - to boot from scsi devices.) Assuming you have a harddrive on /dev/hda, - a cdrom player on /dev/hdb, a burner on /dev/hdc and a second hardrive - on /dev/hdd, for example, and no scsi harddrive /dev/hdd7 gets - translated to (hd1,6). It might sound tricky, and tricky it is indeed, - but as we will see, grub offers a tab completion mechanism that comes - handy for those of you having a lot of harddrives and partitions and - who are a little lost in the grub numbering scheme. Having gotten the - feel for that, it's time to install GRUB. - - The easiest way to install GRUB is to simply type grub at your - chrooted shell prompt: - - Code listing 25.1: Installing GRUB -# emerge grub -# grub - - Important: If you are using hardware RAID this part will not work at - this time. Skip to the section on making your grub.conf. After that we - will complete the grub setup for RAID controllers - - You'll be presented with the grub> grub command-line prompt. Now, you - need to type in the right commands to install the GRUB boot record - onto your hard drive. In my example configuration, I want to install - the GRUB boot record on my hard drive's MBR (master boot record), so - that the first thing I see when I turn on the computer is the GRUB - prompt. In my case, the commands I want to type are: - - Code listing 25.2: GRUB on the MBR -grub> root (hd0,0) // Your boot partition -grub> setup (hd0) // Where the boot record is installed, here, it is the MBR - - Code listing 25.3: GRUB not on the MBR -Alternatively, if you wanted to install the bootloader somewhere other than the - MBR -grub> root (hd0,0) // Your boot partition -grub> setup (hd0,4) // Where the boot record is installed, here it is /dev/hda5 -grub> quit - - Here's how the two commands work. The first root ( ) command tells - GRUB the location of your boot partition (in our example, /dev/hda1 or - (hd0,0) in GRUB terminology. Then, the second setup ( ) command tells - GRUB where to install the boot record - it will be configured to look - for its special files at the root ( ) location that you specified. In - my case, I want the boot record on the MBR of the hard drive, so I - simply specify /dev/hda (also known as (hd0)). If I were using another - boot loader and wanted to set up GRUB as a secondary boot-loader, I - could install GRUB to the boot record of a particular partition. In - that case, I'd specify a particular partition rather than the entire - disk. Once the GRUB boot record has been successfully installed, you - can type quit to quit GRUB. - - Note: The tab completion mechanism of grub can be used from within - grub, assuming you wrote root ( and that you hit the TAB key, you - would be prompted with a list of the available devices (not only - harddrives), hitting the TAB key having written root (hd, grub would - print the available harddrives and hitting the TAB key after writing - root (hd0, would make grub print the list of partitions on the first - harddrive. Checking the syntax of the grub location with completion - should really help to make the right choice. - - Gentoo Linux is now installed, but we need to create the - /boot/grub/grub.conf file so that we get a nice GRUB boot menu when - the system reboots. Here's how to do it. - - Important: To ensure backwards compatibility with GRUB, make sure to - make a link from grub.conf to menu.lst. You can do this by doing ln -s - /boot/grub/grub.conf /boot/grub/menu.lst . - - Now, create the grub.conf file (nano -w /boot/grub/grub.conf), and add - the following to it: - - Code listing 25.4: Grub.conf for GRUB -default 0 -timeout 30 -splashimage=(hd0,0)/boot/grub/splash.xpm.gz - -title=My example Gentoo Linux -root (hd0,0) -kernel (hd0,0)/boot/bzImage root=/dev/hda3 - - #Below is for setup using hardware RAID -title=My Gentoo Linux on RAID -root (hd0,0) -kernel (hd0,0)/boot/bzImage root=/dev/ataraid/dXpY - -# Below needed only for people who dual-boot -title=Windows NT Workstation -root (hd0,5) -chainloader (hd0,5)+1 - - Note: (hd0,0) should be written without any spaces inside the - parentheses. - - Important: If you set up scsi emulation for an IDE cd burner earlier, - then to get it to actually work you need to add an "hdx=ide-scsi" - fragment to the kernel line in grub.conf (where "hdx" should be the - device for your cd burner). - - After saving this file, Gentoo Linux installation is complete. - Selecting the first option will tell GRUB to boot Gentoo Linux without - a fuss. The second part of the grub.conf file is optional, and shows - you how to use GRUB to boot a bootable Windows partition. - - Note: Above, (hd0,0) should point to your "boot" partition (/dev/hda1 - in our example config) and /dev/hda3 should point to your root - filesystem. (hd0,5) contains the NT boot loader. - - Note: The path to the kernel image is relative to the boot partition. - If for example you have separated boot partition (hd0,0) and root - partition (hd0,1), all paths in the grub.conf file above will become - /bzImage. - - If you need to pass any additional options to the kernel, simply add - them to the end of the kernel command. We're already passing one - option (root=/dev/hda3), but you can pass others as well. In - particular, you can turn off devfs by default (not recommended unless - you know what you're doing) by adding the gentoo=nodevfs option to the - kernel command. - - Note: Unlike in earlier versions of Gentoo Linux, you no longer have - to add devfs=mount to the end of the kernel line to enable devfs. In - rc6 devfs is enabled by default. - - Configuring LILO - - While GRUB may be the new alternative for most people, it is not - always the best choice. LILO, the LInuxLOader, is the tried and true - workhorse of Linux bootloaders. Here's how to install LILO if you - would like to use it instead of GRUB: - - The first step is to emerge LILO: - - Code listing 25.5: Emerging LILO - # emerge lilo - - Now it is time to configure LILO. I will give you a small lilo.conf to - use, and I will explain the different parts of the file. - - Code listing 25.6: Example lilo.conf -boot=/dev/hda -map=/boot/map -install=/boot/boot.b -prompt -timeout=50 -message=/boot/message -lba32 -default=linux - -image=/boot/vmlinuz-2.4.20 - label=linux - read-only - root=/dev/hda5 - -#For dual booting windows/other OS -other=/dev/hda1 - label=dos - - * boot=/dev/hda tells LILO to install itself on the first - hard disk on the first IDE controller. - * map=/boot/map states the map file. In normal use, this should not - be modified. - * install=/boot/boot.b tells LILO to install the specified file as - the new boot sector. In normal use, this should not be altered. If - the install line is missing, LILO will assume a default of - /boot/boot.b as the file to be used. - * The existence of prompt tells LILO to show you whatever is - referenced in the message line. While it is not recommended that - you remove the prompt line, if you do remove it, you can still get - a prompt by holding down the [Shift] key while your machine starts - to boot. - * timeout=50 sets the amount of time that LILO will wait for user - input before proceeding with booting the default line entry. This - is measured in tenths of a second, with 50 as the default. - * message=/boot/message refers to the screen that LILO displays to - let you select the operating system or kernel to boot. - * lba32 describes the hard disk geometry to LILO. Another common - entry here is linear. You should not change this line unless you - are very aware of what you are doing. Otherwise, you could put - your system in an unbootable state. - * default=linux refers to the default operating system for LILO to - boot from the options listed below this line. The name linux - refers to the label line below in each of the boot options. - * image=/boot/vmlinuz-2.4.20 specifies the linux kernel to boot with - this particular boot option. - * label=linux names the operating system option in the LILO screen. - In this case, it is also the name referred to by the default line. - * read-only specifies that the root partition (see the root line - below) is read-only and cannot be altered during the boot process. - * root=/dev/hda5 tells LILO what disk partition to use as the root - partition. - - Note: Thanks to [13]Redhat.com for this information. - - After you have edited your lilo.conf file, it is time to run LILO to - load the information into the MBR: - - Code listing 25.7: Running LILO - # /sbin/lilo - - LILO is configured, and now your machine is ready to boot into Gentoo - Linux! - - 26.Creating Bootdisks - - GRUB Bootdisks - - It is always a good idea to make a boot disk the first time you - install any Linux distribution. This is a security blanket, and - generally not a bad thing to do. If you are using some kinds of - hardware RAID, you may need make a GRUB boot disk. With these types of - hardware RAID, if you try to install grub from your chrooted shell it - will fail. If you are in this camp, make a GRUB boot disk, and when - you reboot the first time you can install GRUB to the MBR. Make your - bootdisk like this: - - Code listing 26.1: Creating a GRUB Bootdisk -# mke2fs /dev/fd0 -# mount /dev/fd0 /mnt/floppy -# mkdir -p /mnt/floppy/boot/grub -# cp /usr/share/grub/i386-pc/stage1 /mnt/floppy/boot/grub/ -# cp /usr/share/grub/i386-pc/stage2 /mnt/floppy/boot/grub/ -# umount /mnt/floppy -# grub - -grub> root (fd0) -grub> setup (fd0) -grub> quit - - Now reboot and load the floppy. At the floppy's grub> prompt, you can - now execute the necessary root and setup commands. - - LILO Bootdisks - - If you are using LILO, it is also a good idea to make a bootdisk: - - Code listing 26.2: Making a LILO Bootdisk -# dd if=/boot/your_kernel of=/dev/fd0 -This will only work if your kernel is smaller than 1.4MB - - 27.Installation Complete! - - Now, Gentoo Linux is installed. The only remaining step is to exit the - chrooted shell, update necessary configuration files, safely unmount - your partitions and reboot the system: - - Code listing 27.1: Rebooting the System -# etc-update -# exit -// This exits the chrooted shell; you can also type ^D -# cd / -# umount /mnt/gentoo/boot -# umount /mnt/gentoo/proc -# umount /mnt/gentoo/dev -# umount /mnt/gentoo -# reboot - - Note: After rebooting, it is a good idea to run the update-modules - command to create the /etc/modules.conf file. Instead of modifying - this file directly, you should generally make changes to the files in - /etc/modules.d. - - Important: Remember if you are running hardware RAID, you must use the - bootdisk for the first reboot. then go back and install grub the way - everyone else did the first time. You are done -- congratulations! - - If you have any questions or would like to get involved with Gentoo - Linux development, consider joining our gentoo-user and gentoo-dev - mailing lists (there's a "click to subscribe" link on our [14]main - page). We also have a handy [15]Desktop configuration guide that will - help you to continue configuring your new Gentoo Linux system, and a - useful [16]Portage user guide to help familiarize you with Portage - basics. You can find the rest of the Gentoo Documentation [17]here. If - you have any other questions involving installation or anything for - that matter, please check the Gentoo Linux [18]FAQ. Enjoy and welcome - to Gentoo Linux! - - 28.Gentoo-Stats - - The Gentoo Linux usage statistics program was started as an attempt to - give the developers a way to find out about their user base. It - collects information about Gentoo Linux usage to help us in set - priorities our development. Installing it is completely optional, and - it would be greatly appreciated if you decide to use it. Compiled - statistics can be viewed at [19]http://stats.gentoo.org/. - - The gentoo-stats server will assign a unique ID to your system. This - ID is used to make sure that each system is counted only once. The ID - will not be used to individually identify your system, nor will it be - mached against an IP address or other personal information. Every - precaution has been taken to assure your privacy in the development of - this system. The following are the things that we are monitoring right - now through our "gentoo-stats" program: - * installed packages and their version numbers - * CPU information: speed (MHz), vendor name, model name, CPU flags - (like "mmx" or "3dnow") - * memory information (total available physical RAM, total available - swap space) - * PCI cards and network controller chips - * the Gentoo Linux profile your machine is using (that is, where the - /etc/make.profile link is pointing to). - - We are aware that disclosure of sensitive information is a threat to - most Gentoo Linux users (just as it is to the developers). - * Unless you modify the gentoo-stats program, it will never transmit - sensitive information such as your passwords, configuration data, - shoe size... - * Transmission of your e-mail addresses is optional and turned off - by default. - * The IP address your data transmission originates from will never - be logged in such a way that we can identify you. There are no "IP - address/system ID" pairs. - - The installation is easy - just run the following commands: - - Code listing 28.1: Installing gentoo-stats -# emerge gentoo-stats // Installs gentoo-stats -# gentoo-stats --new // Obtains a new system ID - - The second command above will request a new system ID and enter it - into /etc/gentoo-stats/gentoo-stats.conf automatically. You can view - this file to see additional configuration options. - - After that, the program should be run on a regular schedule - (gentoo-stats does not have to be run as root). Add this line to your - crontab: - - Code listing 28.2: Updating gentoo-stats with cron - 0 0 * * 0,4 /usr/sbin/gentoo-stats --update > /dev/null - - The gentoo-stats program is a simple perl script which can be viewed - with your favortive pager or editor: /usr/sbin/gentoo-stats. - line - Updated 26 Feb 2003 - line - [20]Daniel Robbins - Chief Architect - Chris Houser - Author - [21]Jerry Alexandratos - Author - [22]Grant Goodyear - Ghost - [23]John P. Davis - Editor - [24]Pierre-Henri Jondot - Editor - [25]Eric Stockbridge - Editor - [26]Rajiv Manglani - Editor - [27]Jungmin Seo - Editor - [28]Stoyan Zhekov - Editor - line - Summary: These instructions step you through the process of installing - Gentoo Linux 1.4_rc2 and 1.4_rc3. The Gentoo Linux installation - process supports various installation approaches, depending upon how - much of the system you want to custom-build from scratch. - line - - Donate to support our development efforts. - Make payments with PayPal - it's fast, free and secure! - line - [29]Win4Lin at NeTraverse - - Win4Lin from NeTraverse lets you run Windows applications under Gentoo - Linux at native speeds. [30]Purchase Win4Lin "Gentoo Edition" and - you'll also get a special Gentoo discount. Every sale also helps - support Gentoo Linux development :) - line - [31]DDR Memory at Crucial.com - - Purchase RAM from Crucial.com and a percentage of your sale will go - towards further Gentoo Linux development. - line - Copyright 2001-2003 Gentoo Technologies, Inc. Questions, Comments, - Corrections? Email [32]www@gentoo.org. - -References - - 1. http://www.gentoo.org/ - 2. http://www.gentoo.org/ - 3. http://www.ibiblio.org/gentoo/releases/1.4_rc2/x86/ - 4. http://bugs.gentoo.org/ - 5. http://www.zip.com.au/~akpm/linux/ext3/ext3-usage.html - 6. http://www.gentoo.org/doc/en/use-howto.xml - 7. http://www.gentoo.org/dyn/use-index.xml - 8. http://www.gentoo.org/doc/en/gentoo-x86-install.xml#doc_chp16 - 9. http://www.gentoo.org/doc/en/gentoo-x86-install.xml#doc_chp16 - 10. http://www.openmosix.com/ - 11. http://www.gentoo.org/doc/en/rc-scripts.xml - 12. http://www.gentoo.org/doc/en/faq.xml - 13. http://www.redhat.com/ - 14. http://www.gentoo.org/ - 15. http://www.gentoo.org/doc/en/desktop.xml - 16. http://www.gentoo.org/doc/en/portage-user.xml - 17. http://www.gentoo.org/main/en/docs.xml - 18. http://www.gentoo.org/doc/en/faq.xml - 19. http://stats.gentoo.org/ - 20. mailto:drobbins@gentoo.org - 21. mailto:jerry@gentoo.org - 22. mailto:g2boojum@gentoo.org - 23. mailto:zhen@gentoo.org - 24. mailto:Pierre-Henri.Jondot@wanadoo.fr - 25. mailto:stocke2@gentoo.org - 26. mailto:rajiv@gentoo.org - 27. mailto:seo@gentoo.org - 28. mailto:zhware@gentoo.org - 29. http://www.netraverse.com/gentoo.htm - 30. http://www.netraverse.com/gentoo.htm - 31. http://www.qksrv.net/click-477620-5032687 - 32. mailto:www@gentoo.org diff --git a/src/livecd/profiles/x86/aux-files/local b/src/livecd/profiles/x86/aux-files/local deleted file mode 100644 index 683b0d6ad4..0000000000 --- a/src/livecd/profiles/x86/aux-files/local +++ /dev/null @@ -1,102 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/x86/aux-files/Attic/local,v 1.1 2003/10/19 03:10:55 livewire Exp $ - -HILITE="\033[1m" -NORMAL="\033[0m" - -NET="no" -GAME="yes" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "forceloadnet" ] - then - NET="yes" - elif [ "$x" = "noX" ] - then - GAME="no" - fi -done - -depend() { - before autoconfig -} - -blurb() { - echo -ne ${HILITE}${1} - #blurblen=${#1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} - -start() { - umount /initrd - /sbin/freeramdisk /dev/ram0 - #make our mtab look sane... - local mycdloc - mycdloc=`cat /tmp/mycd` - mycdloc=${mycdloc#/newroot*} - mount -f $mycdloc /mnt/cdrom -t iso9660 -o ro - if [ -e /mnt/livecd.cloop ] - then - mount -f /mnt/livecd.cloop /mnt/cloop -t ext2 -o ro - #cloop was cached to tmpfs so that CD could be unmounted. - else - mount -f /mnt/cdrom/livecd.cloop /mnt/cloop -t ext2 -o ro - fi - rm /tmp/mycd - FOUNDMEM="$(awk '/MemTotal/{print $2}' /proc/meminfo)" - TOTALMEM="$(awk 'BEGIN{m=0};/MemFree|Cached/{m+=$2};END{print m}' /proc/meminfo)" - MINSIZE=2000 - # At least this much memory minus 30% should remain when home and var are full. - MINLEFT=16000 - # Maximum ramdisk size - MAXSIZE="$(expr $TOTALMEM - $MINLEFT)" - # Default ramdisk size for ramdisk - RAMSIZE="$(expr $TOTALMEM / 5)" - # Check for sufficient memory to mount extra ramdisk for /home + /var - if test -n "$TOTALMEM" -a "$TOTALMEM" -gt "$MINLEFT"; then - test -z "$RAMSIZE" && RAMSIZE=1000000 - fi -# tmpfs/varsize version, can use swap - RAMSIZE=$(expr $RAMSIZE \* 5) - - mount -f tmpfs / -t tmpfs -o rw,size=${RAMSIZE}k - echo "10000" > /proc/sys/fs/file-max - echo root:`pwgen -s 16` | chpasswd > /dev/null 2>&1 - if [ "$NET" = "yes" ] - then - ebegin "Auto-detecting network modules" - # Disable kernel messages to console: - echo "0" > /proc/sys/kernel/printk - local x - for x in /lib/modules/*/kernel/drivers/net/* - do - y=${x##*/} - y=${y%%.*} - echo -ne " ${GOOD}*${NORMAL} Scanning for ${y}..." - insmod -f ${x} > /dev/null 2>&1 - backup - done - echo "6" > /proc/sys/kernel/printk - fi - if [ "$GAME" = "yes" ] - then - touch /etc/startgame - fi - if [ -e /etc/conf.d/local.start ] - then - source /etc/conf.d/local.start - fi - -} - -stop() { - return -} - -# vim:ts=4 diff --git a/src/livecd/profiles/x86/aux-files/localstart.gl b/src/livecd/profiles/x86/aux-files/localstart.gl deleted file mode 100644 index 60c5b71e9d..0000000000 --- a/src/livecd/profiles/x86/aux-files/localstart.gl +++ /dev/null @@ -1,8 +0,0 @@ -# /etc/conf.d/local.start: -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/x86/aux-files/Attic/localstart.gl,v 1.1 2003/10/19 03:10:56 livewire Exp $ - -# This is a good place to load any misc. -# programs on startup ( 1>&2 ) - -modprobe nvidia && opengl-update nvidia && cp /etc/X11/xfree-nvidia /etc/X11/XF86Config -modprobe fglrx && opengl-update ati && cp /etc/X11/xfree-ati /etc/X11/XF86Config diff --git a/src/livecd/profiles/x86/aux-files/login.defs b/src/livecd/profiles/x86/aux-files/login.defs deleted file mode 100644 index 8225588ab9..0000000000 --- a/src/livecd/profiles/x86/aux-files/login.defs +++ /dev/null @@ -1,133 +0,0 @@ -# -# /etc/login.defs - Configuration control definitions for the login package. -# -# All items are optional - if not specified then the described action or -# option will be inhibited. -# -# Comment lines (lines beginning with "#") and blank lines are ignored. -# - -# -# Delay in seconds before being allowed another attempt after a login failure -# -FAIL_DELAY 3 - -# -# Enable logging and display of /var/log/faillog login failure info. -# -FAILLOG_ENAB yes - -# -# Enable display of unknown usernames when login failures are recorded. -# -LOG_UNKFAIL_ENAB no - -# -# Enable logging and display of /var/log/lastlog login time info. -# -LASTLOG_ENAB no - -# -# If defined, ":" delimited list of "message of the day" files to -# be displayed upon login. -# -MOTD_FILE /etc/motd -#MOTD_FILE /etc/motd:/usr/lib/news/news-motd - -# -# If defined, file which maps tty line to TERM environment parameter. -# Each line of the file is in a format something like "vt100 tty01". -# -TTYTYPE_FILE /etc/ttytype - -# -# If defined, login failures will be logged here in a utmp format. -# last, when invoked as lastb, will read /var/log/btmp, so... -# -FTMP_FILE /var/log/btmp - -# -# If defined, file which inhibits all the usual chatter during the login -# sequence. If a full pathname, then hushed mode will be enabled if the -# user's name or shell are found in the file. If not a full pathname, then -# hushed mode will be enabled if the file exists in the user's home directory. -# -HUSHLOGIN_FILE .hushlogin -#HUSHLOGIN_FILE /etc/hushlogins - -# -# The default PATH settings. -# -ENV_PATH /usr/local/bin:/usr/bin:/bin - -# -# The default PATH settings for root: -# -ENV_ROOTPATH /sbin:/bin:/usr/sbin:/usr/bin - -# -# The default PATH settings when su'ing to root: -# -ENV_SUPATH /sbin:/bin:/usr/sbin:/usr/bin - -# -# Terminal permissions -# -# TTYGROUP Login tty will be assigned this group ownership. -# TTYPERM Login tty will be set to this permission. -# -# If you have a "write" program which is "setgid" to a special group -# which owns the terminals, define TTYGROUP to the group number and -# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign -# TTYPERM to either 622 or 600. -# -TTYGROUP tty -TTYPERM 0600 - -# -# Password aging controls: -# -# PASS_MAX_DAYS Maximum number of days a password may be used. -# PASS_MIN_DAYS Minimum number of days allowed between password changes. -# PASS_MIN_LEN Minimum acceptable password length. -# PASS_WARN_AGE Number of days warning given before a password expires. -# -PASS_MAX_DAYS 99999 -PASS_MIN_DAYS 0 -PASS_MIN_LEN 5 -PASS_WARN_AGE 7 - -# -# Min/max values for automatic uid selection in useradd -# -UID_MIN 1000 -UID_MAX 60000 - -# -# Min/max values for automatic gid selection in groupadd -# -GID_MIN 100 -GID_MAX 60000 - -# -# Max number of login retries if password is bad -# -LOGIN_RETRIES 3 - -# -# Max time in seconds for login -# -LOGIN_TIMEOUT 60 - -# -# Require password before chfn/chsh can make any changes. -# -CHFN_AUTH yes - -# -# Which fields may be changed by regular users using chfn - use -# any combination of letters "frwh" (full name, room number, work -# phone, home phone). If not defined, no changes are allowed. -# For backward compatibility, "yes" = "rwh" and "no" = "frwh". -# -CHFN_RESTRICT rwh diff --git a/src/livecd/profiles/x86/aux-files/md b/src/livecd/profiles/x86/aux-files/md deleted file mode 100644 index 57ba496755..0000000000 --- a/src/livecd/profiles/x86/aux-files/md +++ /dev/null @@ -1,57 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/x86/aux-files/Attic/md,v 1.1 2003/10/19 03:10:56 livewire Exp $ - -HILITE="\033[1m" -NORMAL="\033[0m" - -RAID="no" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "noraid" ] - then - RAID="no" - fi -done - -depend() { - after checkfs -# after * -} - -blurb() { - echo -ne ${HILITE}${1} - #blurblen=${#1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} -start() { - ebegin "Raid Setup" - -if [ "$RAID" = "yes" ] - then - ebegin "Auto-detecting EVMS modules" - # Disable kernel messages to console: - echo "0" > /proc/sys/kernel/printk - local x - for x in /lib/modules/*/kernel/drivers/evms/* - do - y=${x##*/} - y=${y%%.*} - echo -ne " ${GOOD}*${NORMAL} Scanning for ${y}..." - insmod -f ${x} > /dev/null 2>&1 - backup - done - fi - -} - -stop() { - return -} - -# vim:ts=4 diff --git a/src/livecd/profiles/x86/aux-files/memtest b/src/livecd/profiles/x86/aux-files/memtest Binary files differdeleted file mode 100644 index c8cfeb44a4..0000000000 --- a/src/livecd/profiles/x86/aux-files/memtest +++ /dev/null diff --git a/src/livecd/profiles/x86/aux-files/mingetty b/src/livecd/profiles/x86/aux-files/mingetty Binary files differdeleted file mode 100644 index aaa47dc976..0000000000 --- a/src/livecd/profiles/x86/aux-files/mingetty +++ /dev/null diff --git a/src/livecd/profiles/x86/aux-files/modules b/src/livecd/profiles/x86/aux-files/modules deleted file mode 100644 index ac32060e92..0000000000 --- a/src/livecd/profiles/x86/aux-files/modules +++ /dev/null @@ -1,26 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/x86/aux-files/Attic/modules,v 1.1 2003/10/19 03:10:56 livewire Exp $ - - -depend() { - need bootmisc localmount -} - -start() { - # Loop over every line in /etc/modules.autoload. - (cat /etc/modules.autoload; echo) | # make sure there is a LF at the end - while read module args - do - case "${module}" in - \#*|"") continue ;; - esac - ebegin " Loading module ${module}" - modprobe ${module} ${args} &>/dev/null - eend $? " Failed to load ${module}" -done -} - - -# vim:ts=4 diff --git a/src/livecd/profiles/x86/aux-files/motd b/src/livecd/profiles/x86/aux-files/motd deleted file mode 100644 index b29dec7754..0000000000 --- a/src/livecd/profiles/x86/aux-files/motd +++ /dev/null @@ -1,3 +0,0 @@ -Welcome to the Gentoo Linux LiveCD! -Build: 18 October 2003, i686 optimizations - diff --git a/src/livecd/profiles/x86/aux-files/net b/src/livecd/profiles/x86/aux-files/net deleted file mode 100644 index a144871374..0000000000 --- a/src/livecd/profiles/x86/aux-files/net +++ /dev/null @@ -1,35 +0,0 @@ -# /etc/conf.d/net: -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/x86/aux-files/Attic/net,v 1.1 2003/10/19 03:10:56 livewire Exp $ - -# Global config file for net.* rc-scripts - -# This is basically the ifconfig argument without the ifconfig $iface -# -#iface_eth0="192.168.0.2 broadcast 192.168.0.255 netmask 255.255.255.0" -#iface_eth1="207.170.82.202 broadcast 207.0.255.255 netmask 255.255.0.0" - -# For DHCP set iface_eth? to "dhcp" -# For passing options to dhcpcd use dhcpcd_eth? -# -iface_eth0="dhcp" -iface_eth1="dhcp" -#dhcpcd_eth0="..." - -# For adding aliases to a interface -# -#alias_eth0="192.168.0.3 192.168.0.4" - -# NB: The next is only used for aliases. -# -# To add a custom netmask/broadcast address to created aliases, -# uncomment and change accordingly. Leave commented to assign -# defaults for that interface. -# -#broadcast_eth0="192.168.0.255 192.168.0.255" -#netmask_eth0="255.255.255.0 255.255.255.0" - - -# For setting the default gateway -# -#gateway="eth0/192.168.0.1" - diff --git a/src/livecd/profiles/x86/aux-files/profile b/src/livecd/profiles/x86/aux-files/profile deleted file mode 100644 index 5daa24e6ab..0000000000 --- a/src/livecd/profiles/x86/aux-files/profile +++ /dev/null @@ -1,34 +0,0 @@ -# /etc/profile: -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/x86/aux-files/Attic/profile,v 1.1 2003/10/19 03:10:56 livewire Exp $ - -if [ -e "/etc/profile.env" ] -then - source /etc/profile.env -fi - -#077 would be more secure, but 022 is generally quite realistic -umask 022 -alias cp='cp -i' -alias ls='ls --color' -alias mv='mv -i' -alias pico='nano -w' -alias rm='rm -i' -if [ `/usr/bin/whoami` = 'root' ] -then - if [ "$SHELL" = '/bin/bash' ] || [ "$SHELL" = '/bin/sh' ] - then - export PS1='\[\033[01;31m\]\h \[\033[01;34m\]\W \$ \[\033[00m\]' - fi - export PATH="/bin:/sbin:/usr/bin:/usr/sbin:${ROOTPATH}" -else - if [ "$SHELL" = '/bin/bash' ] || [ "$SHELL" = '/bin/sh' ] - then - export PS1='\[\033[01;32m\]\u@\h \[\033[01;34m\]\W \$ \[\033[00m\]' - fi - export PATH="/bin:/usr/bin:${PATH}" -fi -unset ROOTPATH - -if [ -z "$INPUTRC" -a ! -f "$HOME/.inputrc" ]; then - export INPUTRC="/etc/inputrc" -fi diff --git a/src/livecd/profiles/x86/aux-files/rc b/src/livecd/profiles/x86/aux-files/rc deleted file mode 100644 index 37acb913b6..0000000000 --- a/src/livecd/profiles/x86/aux-files/rc +++ /dev/null @@ -1,521 +0,0 @@ -#!/bin/bash -# Copyright 1999-2003 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/x86/aux-files/Attic/rc,v 1.1 2003/10/19 03:10:56 livewire Exp $ - - -trap ":" INT QUIT TSTP -source /sbin/functions.sh -umask 022 - -try() { - local retval=0 - # This works fine in test, but real life booting, fails for mounting /proc - # if we only check $? for instance ... We thus need to [ -n "${errstr}" ] - # as well. - local errstr - errstr="`(eval $*) 2>&1 >/dev/null`" - retval=$? - if [ "${retval}" -ne 0 ] || \ - ([ -n "`echo "$*" | gawk '/mount/ { print "yes" }'`" -a -n "${errstr}" ]) - then - echo -e "${ENDCOL}${NORMAL}[${BAD} oops ${NORMAL}]" - echo - eerror "The \"${1}\" command failed with error:" - echo - echo "${errstr#*: }" - echo - eerror "Since this is a critical task, startup cannot continue." - echo - /sbin/sulogin ${CONSOLE} - einfo "Unmounting filesystems" - /bin/mount -a -o remount,ro & >/dev/null - einfo "Rebooting" - /sbin/reboot -f - fi - return ${retval} -} - -# Check that $svcdir exists ... -check_statedir() { - if [ ! -d "${svcdir}" ] - then - if ! mkdir -p "${svcdir}" &> /dev/null - then - echo - eerror "For Gentoo Linux to function properly, \"${svcdir}\" need to exist." - eerror "Please mount your root partition read/write, and execute:" - echo - eerror " # mkdir -p ${svcdir}" - echo; echo - /sbin/sulogin ${CONSOLE} - einfo "Unmounting filesystems" - /bin/mount -a -o remount,ro & >/dev/null - einfo "Rebooting" - /sbin/reboot -f - fi - fi -} - -# Save $1 -argv1="$1" -# First time boot stuff goes here. Note that 'sysinit' is an internal runlevel -# used to bring up local filesystems, and should not be started with /sbin/rc -# directly ... -if [ "${RUNLEVEL}" = "S" -a "${argv1}" = "sysinit" ] -then - # Setup initial $PATH just in case - PATH="/bin:/sbin:/usr/bin:/usr/sbin:${PATH}" - - echo - echo -e "${GOOD}Gentoo Linux${GENTOO_VERS}; \e[34;01mhttp://www.gentoo.org/${NORMAL}" - echo -e " Copyright 2001-2003 Gentoo Technologies, Inc.; Distributed under the GPL" - echo - - ebegin "Mounting /proc"; \ - try mount -n /proc; \ - eend $? - - # Figure out the number scripts we are going to start for the progress meter :) - if [ -f /proc/splash ]; then - tscripts=`ls -1R /etc/runlevels/ | grep -c $` - nscripts=`ls -1R /etc/runlevels/ | grep -c '^\B'` - export sscripts=$((${tscripts} - ${nscripts})) - fi - - rc_splash "begin" 2> /dev/null - - if [ "$(get_KV)" -ge "$(KV_to_int '2.5.0')" -a -d /sys ] - then - ebegin "Mounting /sys" - mount -t sysfs none /sys - eend $? - fi - - # Check if the user disabled devfs - devfs="yes" - get_bootparam "nodevfs" - if [ "$?" -eq 0 ] - then - devfs="no" - fi - - # Fix weird bug where there is a /dev/.devfsd in a unmounted /dev - mymounts="`awk '($3 == "devfs") { print "yes"; exit 0 }' /proc/mounts`" - if [ -e "/dev/.devfsd" -a "${mymounts}" != "yes" ] - then - rm -f /dev/.devfsd - fi - - # With the new way, /dev can be mounted by the kernel ... - if [ "${devfs}" = "yes" -a ! -e "/dev/.devfsd" ] - then - mymounts="`awk '($2 == "devfs") { print "yes"; exit 0 }' /proc/filesystems`" - # Is devfs support compiled in? - if [ "${mymounts}" = "yes" ] - then - ebegin "Mounting devfs at /dev"; \ - try mount -n -t devfs none /dev; \ - eend $? - rc_splash "start" - else - clear - echo - einfo "The Gentoo Linux system initialization scripts have detected that your" - einfo "kernel has been compiled without DEVFS support. Because Gentoo Linux" - einfo "has been designed to work with DEVFS, it is required that you compile" - einfo "support for it into your kernel. Please read the 'Gentoo Linux from" - einfo "source (build) CD Installation Guide' at:" - echo - einfo " http://www.gentoo.org/doc/build.html" - echo - einfo "for more information on how to do this." - echo - read -t 15 -p "(hit Enter to continue or wait 15 seconds...)" - fi - fi - - # Need devfsd running now so that /dev/ram0 exists if we need it - mymounts="`awk '($3 == "devfs") { print "yes"; exit 0 }' /proc/mounts`" - if [ "${devfs}" = "yes" -a -e "/dev/.devfsd" -a \ - "${mymounts}" = "yes" ] - then - ebegin "Starting devfsd" - /sbin/devfsd /dev > /dev/null - eend $? - rc_splash "start" - fi - - # Mount either a ramdisk or tmpfs if requested. - # we do this to temp mount, until we can get /var mounted ... - tsvcdir="/mnt/.init.d" - - # Should we use tmpfs or a ramdisk for caching dependency and - # general initscript data? Note that the 'gentoo=tmpfs' kernel - # option should override most settings ... - if get_bootparam "tmpfs" || \ - [ "${svcmount}" = "yes" -a "${svcfstype}" = "tmpfs" ] - then - mkdir -p "${tsvcdir}" - - ebegin "Mounting tmpfs at ${tsvcdir}" - try mount -n -t tmpfs tmpfs "${tsvcdir}" \ - -o rw,mode=0644,size="${svcsize}"k - eend 0 - rc_splash "start" - - elif get_bootparam "ramfs" || \ - [ "${svcmount}" = "yes" -a "${svcfstype}" = "ramfs" ] - then - mkdir -p "${tsvcdir}" - - ebegin "Mounting ramdisk 0 at ${tsvcdir}" - try dd if=/dev/zero of=/dev/ram0 bs=1k count="${svcsize}" - try /sbin/mke2fs -i 1024 -vm0 /dev/ram0 "${svcsize}" - try mount -n -t ext2 /dev/ram0 "${tsvcdir}" -o rw - eend 0 - rc_splash "start" - fi - - if get_bootparam "adelie" - then - einfo "Server/Node low-level initialisation..." - - # Saving the kernel attributed hostname to a file for future - # initialisation selection: see /etc/init.d/switch. - cat /proc/sys/kernel/hostname > "${svcdir}/hostname" - - if checkserver - then - # For server we do pretty much a standard boot ... - einfo "Server detected." - else - # - # Low-level Node Initialisation - # - einfo "Node detected." - - init_node - fi - fi - - # If a Adelie server, or normal Gentoo box, init swap ... - if checkserver - then - # Swap needs to be activated *after* devfs has been mounted and *after* - # devfsd has been started, so that the fstab can be properly parsed - # and only if the server/Gentoo box is initialized ... - ebegin "Activating swap" - /sbin/swapon -a &> /dev/null - eend 0 - rc_splash "start" - fi - - # Set the console loglevel to 1 for a cleaner boot - # the logger should anyhow dump the ring-0 buffer at start to the - # logs, and that with dmesg can be used to check for problems - /bin/dmesg -n 1 - - # $BOOT can be used by rc-scripts to test if it is the first time - # the 'boot' runlevel is executed. Now also needed by some stuff in - # the 'sysinit' runlevel ... - export BOOT="yes" - - # We do not want to break compadibility, so we do not fully integrate - # these into /sbin/rc, but rather start them by hand ... - for x in checkroot hostname modules checkfs localmount - do - source "/etc/init.d/${x}" || error "Failed to source /etc/init.d/${x}" - start || eerror "Failed to start /etc/init.d/${x}" - - if [ "$?" -ne 0 ] - then - echo - eerror "One of more critical startup scripts failed to start!" - eerror "Please correct this, and reboot ..." - echo; echo - /sbin/sulogin ${CONSOLE} - einfo "Unmounting filesystems" - /bin/mount -a -o remount,ro & >/dev/null - einfo "Rebooting" - /sbin/reboot -f - fi - rc_splash "start" - done - - # Check that $svcdir exists ... - check_statedir - - # Since we are using tmpfs or ramfs, just bin to $tsvcdir to $svcdir - if get_bootparam "tmpfs" || get_bootparam "ramfs" || [ "${svcmount}" = "yes" ] - then - mount --bind "${tsvcdir}" "${svcdir}" - fi - - # Clear $svcdir from stale entries - rm -rf "${svcdir}"/* - - # Save our bootsplash variables if needed :) - save_splash_info - - # Update the dependency cache - /sbin/depscan.sh - - # Now that the dependency cache are up to date, make sure these - # are marked as started ... - for x in checkroot hostname modules checkfs localmount - do - ln -snf "/etc/init.d/${x}" "${svcdir}/started/${x}" - done - -fi # Sysinit ends here - -if [ "${RUNLEVEL}" = "S" -a "${argv1}" = "boot" ] -then - # $BOOT can be used by rc-scripts to test if it is the first time - # the 'boot' runlevel is executed - export BOOT="yes" - - # Fix our bootsplash variables - get_splash_info - - rc_splash "start" - -fi - -if [ "${argv1}" = "sysinit" ] -then - exit 0 -fi - -if [ -z "${argv1}" ] -then - if [ -f "${svcdir}/softlevel" ] - then - export SOFTLEVEL="`cat ${svcdir}/softlevel`" - - # Fix our bootsplash variables - get_splash_info - - rc_splash "start" - else - export SOFTLEVEL="boot" - fi -else - export SOFTLEVEL="${argv1}" -fi - -if [ ! -f "${svcdir}/softlevel" ] -then - echo "${SOFTLEVEL}" > "${svcdir}/softlevel" -fi - -# For keeping a list of services that fails during boot/halt -if [ ! -d "${svcdir}/failed" ] -then - install -d -m0755 "${svcdir}/failed" -else - rm -rf "${svcdir}"/failed/* -fi - -if [ "${SOFTLEVEL}" = "reboot" -o "${SOFTLEVEL}" = "shutdown" ] -then - - # Figure out the number scripts we are going to stop for the progress meter :) - if [ -f /proc/splash ]; then - tscripts=`ls -1R ${svcdir}/started | grep -c $` - export cscripts=$((${tscripts} - 1)) - fi - - myscripts="" - - export HALT="${SOFTLEVEL}" - -elif [ ! -d "/etc/runlevels/${SOFTLEVEL}" ] -then - eerror "ERROR: runlevel ${SOFTLEVEL} does not exist; exiting..." - exit 1 -else - myscripts="" - if [ "${SOFTLEVEL}" != "boot" ] - then - # Normal runlevels *include* boot scripts - mylevels="$(dolisting "/etc/runlevels/${SOFTLEVEL}/")" - mylevels="${mylevels} $(dolisting /etc/runlevels/boot/)" - else - # Non-normal runlevels don't include boot scripts as default - mylevels="$(dolisting "/etc/runlevels/${SOFTLEVEL}/")" - fi - for x in ${mylevels} - do - if [ -L "${x}" ] - then - myscripts="${myscripts} ${x##*/}" - fi - done -fi - -# The softscripts dir contains all scripts that belong to the -# runlevel specified in ${svcdir}/softlevel -# It needs to be a new directory, else when stopping the services -# and the old directory is not intact, things get broken - -install -d -m0755 "${svcdir}/softscripts.new" - -for x in ${myscripts} -do - if [ ! -e "/etc/init.d/${x}" ] - then - ewarn "WARNING: /etc/init.d/${x} missing; skipping..." - continue - fi - # The -f eliminates a warning if the symlink already exists, - # which can happen if a service is in both the boot level and - # the current "normal" runlevel - ln -snf "/etc/init.d/${x}" "${svcdir}/softscripts.new/${x}" -done - -dep_stop() { - local x="" - local needsme="" - local myservice="" - local depservice="" - - [ ! -L "$1" ] && continue - if [ ! -e "$1" ] - then - # Remove dud symlinks - rm -f "$1" - continue - fi - myservice="${1##*/}" - - if [ ! -L "${svcdir}/softscripts.new/${myservice}" ] - then - # Candidate for zapping - - # Should not work for 'use' - if [ ! -d "${svcdir}/need/${myservice}" ] - then - # Nothing depends on me - if [ -L "${svcdir}/started/${myservice}" ] - then - "$1" stop - fi - else - # Something may depend on me - needsme=0 - for dep in $(dolisting "${svcdir}/need/${myservice}/") - do - if [ -L "${svcdir}/softscripts.new/${dep##*/}" -a -e "${dep}" ] - then - # This dep is valid - needsme=1 - break - fi - done - if [ "${needsme}" -eq 0 ] - then - if [ -L "${svcdir}/started/${myservice}" ] - then - "$1" stop - fi - fi - fi - fi -} - -# Stop services -for i in $(dolisting "${svcdir}/started/") -do - dep_stop "${i}" -# echo "dep_stop used" -done - -# Only change softlevel AFTER all the services have been stopped, -# else they will not get the depend's right (wrong SOFTLEVEL) - -echo "${SOFTLEVEL}" > "${svcdir}/softlevel" - -if [ "${SOFTLEVEL}" = "reboot" -o "${SOFTLEVEL}" = "shutdown" ] -then - source /sbin/functions.sh - - # Make sure that our $svcdir are clean for next reboot ... - rm -rf "${svcdir}"/* - - source /etc/init.d/halt.sh - - if [ "${SOFTLEVEL}" = "reboot" ] - then - source /etc/init.d/reboot.sh - else - source /etc/init.d/shutdown.sh - fi - # Should never get here - exit 0 -fi - -# Move the old softscritps directory to a different one -# and make the new softscripts directory the current - -mv -f "${svcdir}/softscripts" "${svcdir}/softscripts.old" -mv -f "${svcdir}/softscripts.new" "${svcdir}/softscripts" - -dep_start() { - local x="" - local myservice="" - local depservice="" - - if [ ! -L "$1" ] - then - continue - fi - # Only start a script if it isn't already running - myservice="${1##*/}" - if [ ! -L "${svcdir}/started/${myservice}" ] - then - "$1" start - rc_splash "start" - fi -} - -# Fix our bootsplash variables -get_splash_info - -rc_splash "start" - -# Start scripts -for i in $(dolisting "${svcdir}/softscripts/") -do - dep_start "${i}" - rc_splash "${i} start" -done - -# Clean the old runlevel -rm -rf "${svcdir}/softscripts.old" &> /dev/null - -# Depends gets nuked, so update them -# (this problem should be solved now, but i think it will be a good idea -# to recreate the deps after a change in runlevel) - -#/sbin/depscan.sh &>/dev/null - -# We want devfsd running after a change of runlevel (this is mostly if we return -# from runlevel 'single') -if [ -z "`ps --no-heading -C 'devfsd'`" -a \ - -n "`gawk '/\/dev devfs/ { print }' /proc/mounts 2> /dev/null`" ] -then - /sbin/devfsd /dev &> /dev/null -fi - -# Runlevel end, so clear stale fail list -rm -rf "${svcdir}/failed" &> /dev/null - -# If we were in the boot runlevel, it is done now ... -[ -n "${BOOT}" ] && unset BOOT - -# Save our bootsplash variables if needed :) -save_splash_info - -# vim:ts=4 diff --git a/src/livecd/profiles/x86/aux-files/rc.sbin b/src/livecd/profiles/x86/aux-files/rc.sbin deleted file mode 100644 index d76df576b9..0000000000 --- a/src/livecd/profiles/x86/aux-files/rc.sbin +++ /dev/null @@ -1,443 +0,0 @@ -#!/bin/bash -# Copyright 1999-2002 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo/src/livecd/profiles/x86/aux-files/Attic/rc.sbin,v 1.1 2003/10/19 03:10:56 livewire Exp $ - - -trap ":" INT QUIT TSTP -source /sbin/functions.sh -umask 022 - -try() { - local retval=0 - # this works fine in test, but real life booting, fails for mounting /proc - # for instance, if we only check $?, thus we need to [ -n "${errstr}" ] - # as well - local errstr - errstr="$((eval $*) 2>&1 >/dev/null)" - retval=$? - if [ "${retval}" -ne 0 ] || \ - ([ -n "$(echo $* | egrep 'mount')" -a -n "${errstr}" ]) - then - echo -e "${ENDCOL}${NORMAL}[${BAD} oops ${NORMAL}]" - echo - eerror "The \"${1}\" command failed with error:" - echo - echo "${errstr#*: }" - echo - eerror "Since this is a critical task, startup cannot continue." - echo - /sbin/sulogin ${CONSOLE} - /sbin/reboot -f - fi - return ${retval} -} - -# save $1 -argv1="$1" - -# first time boot stuff goes here -if [ "${RUNLEVEL}" = "S" -a "${argv1}" = "boot" ] -then - # setup initial $PATH just in case - PATH="/bin:/sbin:/usr/bin:/usr/sbin:${PATH}" - - echo -e "${GOOD}Gentoo Linux${GENTOO_VERS}; \e[34;01mhttp://www.gentoo.org/${NORMAL}" - echo -e " Copyright 2001-2002 Gentoo Technologies, Inc.; Distributed under the GPL" - - ebegin "Mounting /proc"; \ - try mount -n /proc; \ - eend $? - - ebegin "Starting metalog" - start-stop-daemon --start --quiet --exec /usr/sbin/metalog \ - -- -p /var/run/metalog.pid --daemonize ${METALOG_OPTS} - eend $? "Failed to start metalog" - - # check if the user disabled devfs - devfs="yes" - get_bootparam "nodevfs" - if [ "$?" -eq 0 ] - then - devfs="no" - fi - - # fix weird bug where there is a /dev/.devfsd in a unmounted /dev - mymounts="$(awk '$3 ~ "devfs" { print $0 }' /proc/mounts)" - if [ -e /dev/.devfsd -a -z "${mymounts}" ] - then - rm -f /dev/.devfsd &>/dev/null - fi - - # with the new way, /dev can be mounted by the kernel ... - if [ "${devfs}" = "yes" -a ! -e /dev/.devfsd ] - then - mymounts="$(awk '$2 ~ "devfs" { print $0 }' /proc/filesystems)" - # is devfs support compiled in? - if [ -n "${mymounts}" ] - then - ebegin "Mounting devfs at /dev"; \ - try mount -n -t devfs none /dev; \ - eend $? - else - clear - echo - einfo "The Gentoo Linux system initialization scripts have detected that your" - einfo "kernel has been compiled without DEVFS support. Because Gentoo Linux" - einfo "has been designed to work with DEVFS, it is required that you compile" - einfo "support for it into your kernel. Please read the 'Gentoo Linux from" - einfo "source (build) CD Installation Guide' at:" - echo - einfo " http://www.gentoo.org/doc/build.html" - echo - einfo "for more information on how to do this." - echo - read -t 15 -p "(hit Enter to continue or wait 15 seconds...)" - fi - fi - - # need devfsd running now so that /dev/ram0 exists if we need it - mymounts="$(cat /proc/mounts)" - if [ "${devfs}" = "yes" -a -e /dev/.devfsd -a \ - "${mymounts/devfs//}" != "${mymounts}" ] - then - ebegin "Starting devfsd" - /sbin/devfsd /dev &>/dev/null - eend $? - fi - - if [ ! -d ${svcdir} ] - then - echo - eerror "For Gentoo Linux to function properly, \"${svcdir}\" need to exist." - eerror "Please mount your root partition read/write, and execute:" - echo - eerror " # mkdir -p ${svcdir}" - echo - echo - /sbin/sulogin ${CONSOLE} - mount -a -o remount,ro &>/dev/null - /sbin/reboot -f - fi - - # mount either a ramdisk or tmpfs and do dep scan - - # should we use tmpfs or a ramdisk ? - if ! get_bootparam "notmpfs" && \ - ([ "${svcfstype}" = "tmpfs" -o "${svcfstype}" != "ramfs" ]) - then - ebegin "Mounting tmpfs at ${svcdir}"; \ - try mount -n -t tmpfs tmpfs ${svcdir} \ - -o rw,mode=0644,size=${svcsize}k; \ - eend 0 - else - ebegin "Mounting ramdisk 0 at ${svcdir}"; \ - try dd if=/dev/zero of=/dev/ram0 bs=1k count=${svcsize}; \ - try /sbin/mke2fs -i 1024 -vm0 /dev/ram0 ${svcsize}; \ - try mount -n -t ext2 /dev/ram0 ${svcdir} -o rw; \ - eend 0 - fi - - if ! get_bootparam "notmpfs" && get_bootparam "ngpt" - then - # POSIX shared memory support - ebegin "Mounting POSIX shared memory" - mkdir -p /dev/shm - try mount -n -t tmpfs tmpfs /dev/shm - eend $? - - # NGPT support (http://www-124.ibm.com/developerworks/oss/pthreads/) - if [ -x /usr/bin/ngptinit ] - then - ebegin "Initializing NGPT" - /usr/bin/ngptinit &> /dev/null || : - eend $? - fi - fi - - /sbin/depscan.sh - - # Saving the kernel attributed hostname to a file for future - # initialisation selection: see /etc/init.d/switch. - get_bootparam "adelie" && cat /proc/sys/kernel/hostname > ${svcdir}/hostname - - get_bootparam "adelie" && einfo "Server/Node low-level initialisation..." - if checkserver - then - get_bootparam "adelie" && einfo "Server detected." - - # swap needs to be activated *after* devfs has been mounted and *after* - # devfsd has been started, so that the fstab can be properly parsed - # and only if the server is initialized - ebegin "Activating swap" - /sbin/swapon -a &>/dev/null - eend 0 - else - # - # Low-level Node Initialisation - # - einfo "Node detected." - ebegin "Importing local userspace on node" - - try mount -t tmpfs none ${shmdir} - - for DIR in /etc /var /root; - do - - if grep -q -v "^${DIR}[[:space:]]" /etc/exports - then - mount -o nolock -n server:${DIR} ${DIR} - fi - - if [ -e /etc/conf.d/exclude/${DIR} ] - then - find ${DIR} -type d | grep -v -f /etc/conf.d/exclude/${DIR} > ${shmdir}/${DIR}.lst - else - find ${DIR} -type d > ${shmdir}/${DIR}.lst - fi - - for SUBDIR in $(cat ${shmdir}/${DIR}.lst); - do - mkdir ${shmdir}/${SUBDIR} - chmod --reference=${SUBDIR} ${shmdir}/${SUBDIR} - cp -dp ${SUBDIR}/* ${shmdir}/${SUBDIR} &>/dev/null - done - - if [ -e /etc/conf.d/exclude/${DIR} ] - then - for EMPTYDIR in $(cat /etc/conf.d/exclude/${DIR}); - do - mkdir ${shmdir}/${EMPTYDIR} - chmod --reference=${SUBDIR} ${shmdir}/${SUBDIR} - done - fi - - umount -n ${DIR} > /dev/null - mount -n -o bind ${shmdir}/${DIR} ${DIR} - done - - mkdir ${shmdir}/tmp - chmod 0777 ${shmdir}/tmp - mount -n -o bind ${shmdir}/tmp /tmp - - cat /proc/mounts > /etc/mtab - - cp -f /etc/inittab.node /etc/inittab - [ -e /etc/fstab.node ] && cp -f /etc/fstab.node /etc/fstab - killall -1 init - - eend 0 - fi - - # set the console loglevel to 1 for a cleaner boot - # the logger should anyhow dump the ring-0 buffer at start to the - # logs, and that with dmesg can be used to check for problems - - /bin/dmesg -n 1 - - # $BOOT can be used by rc-scripts to test if it is the first time - # the 'boot' runlevel is executed - - export BOOT="yes" - -fi # boot ends here - -if [ -z "${argv1}" ] -then - if [ -f ${svcdir}/softlevel ] - then - export SOFTLEVEL="$(cat ${svcdir}/softlevel)" - else - export SOFTLEVEL="boot" - fi -else - export SOFTLEVEL="${argv1}" -fi - -if [ ! -f ${svcdir}/softlevel ] -then - echo "${SOFTLEVEL}" > ${svcdir}/softlevel -fi - -# for keeping a list of services that fails during boot/halt -if [ ! -d ${svcdir}/failed ] -then - install -d -m0755 ${svcdir}/failed -else - rm -rf ${svcdir}/failed/* -fi - -if [ "${SOFTLEVEL}" = "reboot" -o "${SOFTLEVEL}" = "shutdown" ] -then - myscripts="" -elif [ ! -d /etc/runlevels/${SOFTLEVEL} ] -then - eerror "ERROR: runlevel ${SOFTLEVEL} does not exist; exiting..." - exit 1 -else - myscripts="" - if [ "${SOFTLEVEL}" != "boot" ] - then - # normal runlevels *include* boot scripts - mylevels="$(dolisting /etc/runlevels/${SOFTLEVEL}/)" - mylevels="${mylevels} $(dolisting /etc/runlevels/boot/)" - else - # non-normal runlevels don't include boot scripts as default - mylevels="$(dolisting /etc/runlevels/${SOFTLEVEL}/)" - fi - for x in ${mylevels} - do - if [ -L "${x}" ] - then - myscripts="${myscripts} ${x##*/}" - fi - done -fi - -# the softscripts dir contains all scripts that belong to the -# runlevel specified in ${svcdir}/softlevel -# it needs to be a new directory, else when stopping the services -# and the old directory is not intact, things get broken - -install -d -m0755 ${svcdir}/softscripts.new - -for x in ${myscripts} -do - if [ ! -e "/etc/init.d/${x}" ] - then - ewarn "WARNING: /etc/init.d/${x} missing; skipping..." - continue - fi - # the -f eliminates a warning if the symlink already exists, - # which can happen if a service is in both the boot level and - # the current "normal" runlevel - ln -sf /etc/init.d/${x} ${svcdir}/softscripts.new/${x} -done - -dep_stop() { - local x="" - local needsme="" - local myservice="" - local depservice="" - [ ! -L $1 ] && continue - if [ ! -e $1 ] - then - # remove dud symlinks - rm $1 - continue - fi - myservice="${1##*/}" - - if [ ! -L "${svcdir}/softscripts.new/${myservice}" ] - then - # candidate for zapping - - # should not work for 'use' - if [ ! -d "${svcdir}/need/${myservice}" ] - then - # nothing depends on me - if [ -L "${svcdir}/started/${myservice}" ] - then - $1 stop - fi - else - # something may depend on me - needsme=0 - for dep in $(dolisting ${svcdir}/need/${myservice}/) - do - if [ -L "${svcdir}/softscripts.new/${dep##*/}" -a -e ${dep} ] - then - # this dep is valid - needsme=1 - break - fi - done - if [ "${needsme}" -eq 0 ] - then - if [ -L "${svcdir}/started/${myservice}" ] - then - $1 stop - fi - fi - fi - fi -} - -# stop services -for i in $(dolisting ${svcdir}/started/) -do - dep_stop ${i} -done - -# Only change softlevel AFTER all the services have been stopped, -# else they will not get the depend's right (wrong SOFTLEVEL) - -echo "${SOFTLEVEL}" > ${svcdir}/softlevel - -if [ "${SOFTLEVEL}" = "reboot" -o "${SOFTLEVEL}" = "shutdown" ] -then - source /sbin/functions.sh - source /etc/init.d/halt.sh - if [ "${SOFTLEVEL}" = "reboot" ] - then - source /etc/init.d/reboot.sh - else - source /etc/init.d/shutdown.sh - fi - # should never get here - exit 0 -fi - -# move the old softscritps directory to a different one -# and make the new softscripts directory the current - -mv ${svcdir}/softscripts ${svcdir}/softscripts.old &>/dev/null -mv ${svcdir}/softscripts.new ${svcdir}/softscripts &>/dev/null - -dep_start() { - local x="" - local myservice="" - local depservice="" - if [ ! -L $1 ] - then - continue - fi - # only start a script if it isn't already running - myservice="${1##*/}" - if [ ! -L "${svcdir}/started/${myservice}" ] - then - $1 start - fi -} - -# start scripts -for i in $(dolisting ${svcdir}/softscripts/) -do - dep_start ${i} -done - -# clean the old runlevel -rm -rf ${svcdir}/softscripts.old &>/dev/null - -# depends gets nuked, so update them -# (this problem should be solved now, but i think it will be a good idea -# to recreate the deps after a change in runlevel) - -#/sbin/depscan.sh &>/dev/null - -# we want devfsd running after a change of runlevel (this is mostly if we return -# from runlevel 'single') -if [ -z "$(ps -A | egrep 'devfsd')" -a \ - -n "$(cat /proc/mounts | egrep '/dev devfs')" ] -then - /sbin/devfsd /dev &>/dev/null -fi - -# runlevel end, so clear stale fail list -rm -rf ${svcdir}/failed &>/dev/null - -# if we were in the boot runlevel, it is done now ... -[ -n "${BOOT}" ] && unset BOOT - - -# vim:ts=4 diff --git a/src/livecd/profiles/x86/aux-files/resolv.conf b/src/livecd/profiles/x86/aux-files/resolv.conf deleted file mode 100644 index ab1cae14ce..0000000000 --- a/src/livecd/profiles/x86/aux-files/resolv.conf +++ /dev/null @@ -1 +0,0 @@ -nameserver ##NS1## diff --git a/src/livecd/profiles/x86/aux-files/splash b/src/livecd/profiles/x86/aux-files/splash deleted file mode 100644 index b83f3c8351..0000000000 --- a/src/livecd/profiles/x86/aux-files/splash +++ /dev/null @@ -1,71 +0,0 @@ -#!/bin/bash -# -# splash.sh - script to paint progress bar during -# system startup/shutdown. This script is solely run -# by the init scripts (shell function rc_splash) -# -# (w) 2002-2003 Stefan Reinauer, <stepan@suse.de> -# Modified for Gentoo by Jay Pfeifer <pfeifer@gentoo.org> -# It's licensed under GPL, of course. -# -# this script expects the following environment variables: -# sscripts = number of start scripts to be executed for runlevel change -# kscripts = number of stop scripts to be executed for runlevel change -# progress = number of currently executed start/stop script - -# execute splash binary utility because we are a wrapper: -if [ "$1" == "-s" -o "$1" == "-u" -o "$1" == "-n" -o "$1" == "-f" ]; then - exec /sbin/splash.bin $* -else - ( exec /sbin/splash.bin "$*" ) -fi - -# assertions -test -r /proc/splash || exit 0 -sparam=$1 - -# - -function box() { true; } # ignore box descriptions in the config file - -if [ -f /etc/bootsplash/default/config/bootsplash-`fbresolution`.cfg ]; then - . /etc/bootsplash/default/config/bootsplash-`fbresolution`.cfg -fi - -# Print text string.. -if [ "${sparam}" = "begin" ]; then - fbtruetype.static -x ${text_x} -y ${text_y} -t ${text_color} -s ${text_size} \ - "Booting the system... Press F2 for verbose mode" 2> /dev/null - export startnum=$(( ${sscripts} + 5 )) - -fi - -#if [ "${sparam}" = "end" ]; then - # fbtruetype.static -x ${text_x} -y ${text_y} -t ${text_color} -s ${text_size} \ - # "Shutting down the system... Press F2 for verbose mode" 2> /dev/null -# export stopnum=$(( ${cscripts} / 4 )) -#fi - -# Paint progressbar.. -#if [ "$1" = "start" ]; then -if [ "${#sparam}" -ge "5" ] && \ - [ `expr "${sparam}" : '.*\(.....\)'` = "start" ]; then - export startnum=$(( ${sscripts} + 5 )) - echo "show $(( 65534 * ( ${progress} + 1 ) / ${startnum} ))" > /proc/splash - #echo ${progress} ${sscripts} ${startnum} -# fbtruetype -x ${text_x} -y $((${text_y} + 70)) -t ${text_color} -s ${text_size} \ -# " " 2> /dev/null -# fbtruetype -x ${text_x} -y $((${text_y} + 70)) -t ${text_color} -s ${text_size} \ -# "$1" 2> /dev/null -fi -#if [ "$1" = "stop" ]; then -if [ "${#sparam}" -ge "4" ] && \ - [ `expr "${sparam}" : '.*\(....\)'` = "stop" ]; then - export stopnum=$(( ${cscripts} / 4 )) - echo "show $(( 65534 * ( ${progress} + 1 ) / ${stopnum} ))" > /proc/splash - #echo ${progress} ${sscripts} ${stopnum} -# fbtruetype -x ${text_x} -y $((${text_y} + 70)) -t ${text_color} -s ${text_size} \ -# " " 2> /dev/null -# fbtruetype -x ${text_x} -y $((${text_y} + 70)) -t ${text_color} -s ${text_size} \ -# "$1" 2> /dev/null -fi diff --git a/src/livecd/profiles/x86/aux-files/splash.bin b/src/livecd/profiles/x86/aux-files/splash.bin Binary files differdeleted file mode 100644 index be47b88ee5..0000000000 --- a/src/livecd/profiles/x86/aux-files/splash.bin +++ /dev/null diff --git a/src/livecd/profiles/x86/aux-files/splash.sh b/src/livecd/profiles/x86/aux-files/splash.sh deleted file mode 100644 index a25b473471..0000000000 --- a/src/livecd/profiles/x86/aux-files/splash.sh +++ /dev/null @@ -1,26 +0,0 @@ -# Prelim code to add bootsplash support to Gentoo :) -rc_splash() { - test -f /proc/splash || return 0 - if [ -n "`grep 'splash=silent' /proc/cmdline 2>/dev/null`" ]; then - /sbin/splash "$1" - export progress=$(( ${progress} + 1 )) - fi -} - -# Allows us to save variable info between runlevels (ie. rc iterations) -save_splash_info() { - if [ -f /proc/splash ]; then - echo ${sscripts} > ${svcdir}/sscripts.tmp - echo ${progress} > ${svcdir}/progress.tmp - fi -} - -# Retrieve splash state info -get_splash_info() { - if [ -f /proc/splash ]; then - export sscripts=`cat ${svcdir}/sscripts.tmp` - export progress=`cat ${svcdir}/progress.tmp` - fi -} - - diff --git a/src/livecd/profiles/x86/aux-files/usleep b/src/livecd/profiles/x86/aux-files/usleep Binary files differdeleted file mode 100644 index 4bee8c4bc1..0000000000 --- a/src/livecd/profiles/x86/aux-files/usleep +++ /dev/null diff --git a/src/livecd/profiles/x86/base-packages b/src/livecd/profiles/x86/base-packages deleted file mode 100644 index 4bf25c31f7..0000000000 --- a/src/livecd/profiles/x86/base-packages +++ /dev/null @@ -1,41 +0,0 @@ -####### basic packages installed , use a ^package-name for experimental version ####### -metalog -sys-apps/pciutils -grub -lilo -parted -mt-st -star -strace -raidtools -nfs-utils -jfsutils -#irssi -speedtouch -dosfstools -xfsprogs -e2fsprogs -reiserfsprogs -hdparm -nano -less -openssh -dhcpcd -mingetty -pwgen -dietlibc -popt -dialog -=sys-apps/modutils-2.4.25 -=sys-apps/hotplug-20020826-r2 -screen -gcc -^genkernel -^gs-sources -^mirrorselect -^iputils -^kudzu -^=sys-apps/hwdata-knoppix-0.8 -^hwsetup -^bootsplash -^=sys-apps/baselayout-1.8.6.8-r1 diff --git a/src/livecd/profiles/x86/boot.msg b/src/livecd/profiles/x86/boot.msg deleted file mode 100644 index dba36228ba..0000000000 --- a/src/livecd/profiles/x86/boot.msg +++ /dev/null @@ -1,4 +0,0 @@ -17 gentoo.lss - -Gentoo Linux 1.4 http://www.gentoo.org/ RELEASE: 1.4-Release -Enter to boot; F2 for options. diff --git a/src/livecd/profiles/x86/clean b/src/livecd/profiles/x86/clean deleted file mode 100644 index 2b7a148d0e..0000000000 --- a/src/livecd/profiles/x86/clean +++ /dev/null @@ -1,55 +0,0 @@ -#!/bin/bash -if [ -z "$CD_BUILDCHROOT" ] -then - echo "Error: \$CD_BUILDCHROOT not defined." - exit 1 -fi - -#keep important C/C++/Java shared libraries -touch ${CD_BUILDCHROOT}/usr/lib/gcc-lib/*/*/*.so* -touch ${CD_BUILDCHROOT}/usr/lib/libstdc++* -touch ${CD_BUILDCHROOT}/etc/env.d/??gcc* - -mount_all -#remove extra build-related packages -chroot ${CD_BUILDCHROOT} /bin/bash -e <<EOF -source /etc/profile -emerge -C genkernel automake autoconf bison patch linux-headers man-pages || exit 1 -emerge -C sash bison flex gettext ccache addpatches perl man groff lib-compat python miscfiles || exit 1 -EOF -#detect chroot errors: -[ $? -ne 0 ] && chroot_die "problems cleaning packages" -umount_all - -#final cleanups -for x in /var/tmp/portage /var/db /var/empty /var/cache \ -/var/lock /tmp /usr/portage /usr/share/man /usr/share/unimaps \ -/usr/include /usr/share/dict /usr/share/doc /usr/share/ss /usr/share/state /usr/share/texinfo \ -/var/tmp /usr/lib/python2.2 /usr/lib/portage /usr/share/gettext /usr/share/rfc \ -/usr/X11R6/man /usr/X11R6/include /usr/X11R6/lib/X11/doc -do - rm -rf ${CD_BUILDCHROOT}/${x}/* ${CD_BUILDCHROOT}/${x}/.* -done -#rm -rf ${CD_BUILDCHROOT}/usr/share/keymaps - -for x in /sbin/insmod.static /sbin/sln \ -/usr/X11R6/bin/Xnest \ -/usr/X11R6/bin/Xprt \ -/usr/X11R6/bin/Xvfb -do - rm ${CD_BUILDCHROOT}/${x} -done - -#clean up the kernel source tree... -rm -rf ${CD_BUILDCHROOT}/usr/src/linux* -rm -rf ${CD_BUILDCHROOT}/var/db/pkg/sys-kernel/* -rm -rf ${CD_BUILDCHROOT}/usr/lib/gcc-lib/*/*/libgcj* -rm -rf ${CD_BUILDCHROOT}/usr/lib/*.a -rm -rf ${CD_BUILDCHROOT}/lib/*.a -rm -rf ${CD_BUILDCHROOT}/usr/X11R6/lib/*.a -#remove entire directory trees (argument 1) *except* for these files/dir trees (arguments 2+) -#zapmost /usr/share/terminfo l/linux v/vt100 v/vt102 n/nxterm x/xterm x/xterm-color -#zapmost /usr/share/locale C en_US -#zapmost /usr/X11R6/lib/X11/locale iso8859-1 iso8859-15 common en_US.UTF-8 -#[ -e ${CD_BUILDCHROOT}/usr/lib/locale ] && zapmost /usr/lib/locale en_US -zapmost /usr/share/misc magic pci.ids diff --git a/src/livecd/profiles/x86/gentoo.lss b/src/livecd/profiles/x86/gentoo.lss Binary files differdeleted file mode 100644 index 6c7c89c82b..0000000000 --- a/src/livecd/profiles/x86/gentoo.lss +++ /dev/null diff --git a/src/livecd/profiles/x86/gs2-config b/src/livecd/profiles/x86/gs2-config deleted file mode 100644 index da75b8b3df..0000000000 --- a/src/livecd/profiles/x86/gs2-config +++ /dev/null @@ -1,1599 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODVERSIONS=y -CONFIG_KMOD=y - -# -# Processor type and features -# -# CONFIG_LOLAT is not set -# CONFIG_LOLAT_SYSCTL is not set -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -# CONFIG_MPPRO31 is not set -# CONFIG_M68631 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MK8 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_MVIAC3_2 is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -CONFIG_TOSHIBA=m -CONFIG_I8K=m -CONFIG_THINKPAD=m -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -CONFIG_PREEMPT=y -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -CONFIG_PCMCIA=m -CONFIG_CARDBUS=y -CONFIG_TCIC=y -CONFIG_I82092=y -CONFIG_I82365=y - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -# CONFIG_EVMS_GPT_SEGMENT_MGR is not set -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -# CONFIG_EVMS_OS2 is not set -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -CONFIG_CRYPTO=m -CONFIG_CIPHERS=y -CONFIG_CIPHER_AES=m -CONFIG_CIPHER_MARS=m -CONFIG_CIPHER_RC6=m -CONFIG_CIPHER_SERPENT=m -CONFIG_CIPHER_TWOFISH=m -CONFIG_CIPHER_3DES=m -CONFIG_CIPHER_BLOWFISH=m -CONFIG_CIPHER_CAST5=m -CONFIG_CIPHER_GOST=m -CONFIG_CIPHER_IDEA=m -CONFIG_CIPHER_RC5=m -CONFIG_CIPHER_NULL=m -CONFIG_CIPHER_DES=m -CONFIG_CIPHER_DFC=m -CONFIG_CIPHER_BLOWFISH_OLD=m -CONFIG_DIGESTS=y -CONFIG_DIGEST_MD5=m -CONFIG_DIGEST_SHA1=m -CONFIG_DIGEST_RIPEMD160=m -CONFIG_DIGEST_SHA256=m -CONFIG_DIGEST_SHA384=m -CONFIG_DIGEST_SHA512=m -CONFIG_CRYPTODEV=y -CONFIG_CRYPTOLOOP=m -CONFIG_CRYPTOLOOP_ATOMIC=y -CONFIG_CRYPTOLOOP_IV_HACK=y -CONFIG_CRYPTOLOOP_DEBUG=y -CONFIG_IPSEC_TUNNEL=m - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -# CONFIG_IP_NF_COMPAT_IPCHAINS is not set -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -CONFIG_IPX=m -CONFIG_IPX_INTERN=y -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -CONFIG_DECNET=m -# CONFIG_DECNET_SIOCGIFCONF is not set -# CONFIG_DECNET_ROUTER is not set -CONFIG_BRIDGE=m -CONFIG_X25=m -CONFIG_LAPB=m -CONFIG_LLC=y -CONFIG_NET_DIVERT=y -CONFIG_ECONET=m -# CONFIG_ECONET_AUNUDP is not set -# CONFIG_ECONET_NATIVE is not set -CONFIG_WAN_ROUTER=m -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_IPSEC is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -CONFIG_BLK_DEV_ADMA100=y -CONFIG_BLK_DEV_AEC62XX=y -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_TRIFLEX=y -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX_OLD=y -# CONFIG_PDC202XX_BURST is not set -CONFIG_BLK_DEV_PDC202XX_NEW=y -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_SC1200=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIIMAGE=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_PDC202XX=y -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m -CONFIG_BLK_DEV_ATARAID_SII=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_BUILD_FIRMWARE is not set -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -# CONFIG_SCSI_SYM53C8XX is not set -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -CONFIG_SCSI_NSP32=m -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -CONFIG_SCSI_PCMCIA=y -CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_FDOMAIN=m -CONFIG_PCMCIA_NINJA_SCSI=m -CONFIG_PCMCIA_QLOGIC=m - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_MAX_SGE=40 -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -CONFIG_EQUALIZER=y -CONFIG_TUN=m -CONFIG_ETHERTAP=y -CONFIG_NET_SB1000=m - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_TYPHOON=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_AMD8111_ETH=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -# CONFIG_EEPRO100_PIO is not set -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_R8169=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -CONFIG_FDDI=y -CONFIG_DEFXX=m -CONFIG_SKFP=m -CONFIG_HIPPI=y -CONFIG_ROADRUNNER=m -# CONFIG_ROADRUNNER_LARGE_RINGS is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_STRIP=m -CONFIG_WAVELAN=m -CONFIG_ARLAN=m -CONFIG_AIRONET4500=m -CONFIG_AIRONET4500_NONCS=m -CONFIG_AIRONET4500_PNP=y -CONFIG_AIRONET4500_PCI=y -# CONFIG_AIRONET4500_ISA is not set -# CONFIG_AIRONET4500_I365 is not set -CONFIG_AIRONET4500_PROC=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -CONFIG_WAN=y -# CONFIG_HOSTESS_SV11 is not set -# CONFIG_COSA is not set -# CONFIG_COMX is not set -# CONFIG_DSCC4 is not set -# CONFIG_LANMEDIA is not set -# CONFIG_ATI_XX20 is not set -# CONFIG_SEALEVEL_4021 is not set -# CONFIG_SYNCLINK_SYNCPPP is not set -# CONFIG_HDLC is not set -# CONFIG_DLCI is not set -# CONFIG_WAN_ROUTER_DRIVERS is not set -# CONFIG_LAPBETHER is not set -# CONFIG_X25_ASY is not set -# CONFIG_SBNI is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_AXNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -# CONFIG_ARCNET_COM20020_CS is not set -CONFIG_PCMCIA_IBMTR=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_NET_PCMCIA_RADIO=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_NETWAVE=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_AIRONET4500_CS=m - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_IRDA_DEBUG=y - -# -# Infrared-port device drivers -# -CONFIG_IRTTY_SIR=m -CONFIG_IRPORT_SIR=m -CONFIG_DONGLE=y -CONFIG_ESI_DONGLE=m -CONFIG_ACTISYS_DONGLE=m -CONFIG_TEKRAM_DONGLE=m -CONFIG_GIRBIL_DONGLE=m -CONFIG_LITELINK_DONGLE=m -CONFIG_MCP2120_DONGLE=m -CONFIG_OLD_BELKIN_DONGLE=m -CONFIG_ACT200L_DONGLE=m -CONFIG_MA600_DONGLE=m -CONFIG_USB_IRDA=m -CONFIG_NSC_FIR=m -CONFIG_WINBOND_FIR=m -# CONFIG_TOSHIBA_OLD is not set -CONFIG_TOSHIBA_FIR=m -CONFIG_SMC_IRCC_FIR=m -CONFIG_ALI_FIR=m -CONFIG_VLSI_FIR=m - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set -# CONFIG_ISDN_X25 is not set - -# -# ISDN feature submodules -# -CONFIG_ISDN_DRV_LOOP=m -CONFIG_ISDN_DIVERSION=m - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m -CONFIG_USB_AUERISDN=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=m - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_ECC is not set -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set - -# -# I2C support -# -CONFIG_I2C=m -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -CONFIG_I2C_MAINBOARD=y -CONFIG_I2C_ALI1535=m -CONFIG_I2C_ALI15X3=m -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_AMD756=m -CONFIG_I2C_AMD8111=m -# CONFIG_I2C_TSUNAMI is not set -CONFIG_I2C_I801=m -# CONFIG_I2C_I810 is not set -CONFIG_I2C_PIIX4=m -CONFIG_I2C_SIS5595=m -CONFIG_I2C_SIS630=m -CONFIG_I2C_SIS645=m -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_VIA is not set -CONFIG_I2C_VIAPRO=m -# CONFIG_I2C_VOODOO3 is not set -CONFIG_I2C_ISA=m -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_PROC=m - -# -# Hardware sensors support -# -CONFIG_SENSORS=y -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1024=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM9240=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_FSCPOS=m -CONFIG_SENSORS_FSCSCY=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_MAXILIFE=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_MTP008=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_SIS5595=m -CONFIG_SENSORS_SMSC47M1=m -CONFIG_SENSORS_THMC50=m -CONFIG_SENSORS_VIA686A=m -CONFIG_SENSORS_VT1211=m -CONFIG_SENSORS_VT8231=m -CONFIG_SENSORS_W83781D=m -# CONFIG_SENSORS_OTHER is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_IPMI_PANIC_EVENT is not set -# CONFIG_IPMI_DEVICE_INTERFACE is not set -# CONFIG_IPMI_KCS is not set -# CONFIG_IPMI_WATCHDOG is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_SCx200_GPIO is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -CONFIG_AGP_INTEL=y -CONFIG_AGP_I810=y -CONFIG_AGP_VIA=y -CONFIG_AGP_AMD=y -CONFIG_AGP_AMD_8151=y -CONFIG_AGP_SIS=y -CONFIG_AGP_ALI=y -CONFIG_AGP_SWORKS=y -CONFIG_AGP_NV=y -# CONFIG_DRM is not set - -# -# PCMCIA character devices -# -CONFIG_PCMCIA_SERIAL_CS=m -CONFIG_SYNCLINK_CS=m -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -# CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -CONFIG_VXFS_FS=m -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -CONFIG_XFS_QUOTA=y -CONFIG_XFS_DMAPI=y -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -CONFIG_CODA_FS=m -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_ROOT_NFS is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -CONFIG_NCP_FS=m -CONFIG_NCPFS_PACKET_SIGNING=y -CONFIG_NCPFS_IOCTL_LOCKING=y -CONFIG_NCPFS_STRONG=y -CONFIG_NCPFS_NFS_NS=y -CONFIG_NCPFS_OS2_NS=y -CONFIG_NCPFS_SMALLDOS=y -CONFIG_NCPFS_NLS=y -CONFIG_NCPFS_EXTRAS=y -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_IMON=m -CONFIG_EXECOUNT=y - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -CONFIG_VIDEO_SELECT=y -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -CONFIG_FB=y -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FB_LOGO_TUX is not set -# CONFIG_FB_LOGO_LARRY is not set -# CONFIG_FB_LOGO_GENTOO is not set -# CONFIG_FB_LOGO_G is not set -# CONFIG_FB_LOGO_PENGUIN is not set -CONFIG_FB_LOGO_POWEREDBY=y -# CONFIG_FB_RIVA is not set -# CONFIG_FB_CLGEN is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_VESA=y -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_HGA is not set -CONFIG_VIDEO_SELECT=y -# CONFIG_FB_MATROX is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_INTEL is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_FBCON_SPLASHSCREEN=y -CONFIG_FBCON_CFB16=y -# CONFIG_FBCON_ADVANCED is not set -CONFIG_FBCON_CFB8=y -CONFIG_FBCON_CFB16=y -CONFIG_FBCON_CFB24=y -CONFIG_FBCON_CFB32=y -# CONFIG_FBCON_FONTWIDTH8_ONLY is not set -# CONFIG_FBCON_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_SOUND_ALI5455=m -CONFIG_SOUND_BT878=m -CONFIG_SOUND_CMPCI=m -# CONFIG_SOUND_CMPCI_FM is not set -# CONFIG_SOUND_CMPCI_MIDI is not set -# CONFIG_SOUND_CMPCI_JOYSTICK is not set -# CONFIG_SOUND_CMPCI_CM8738 is not set -CONFIG_SOUND_EMU10K1=m -# CONFIG_MIDI_EMU10K1 is not set -CONFIG_SOUND_FUSION=m -CONFIG_SOUND_CS4281=m -CONFIG_SOUND_ES1370=m -CONFIG_SOUND_ES1371=m -CONFIG_SOUND_ESSSOLO1=m -CONFIG_SOUND_MAESTRO=m -CONFIG_SOUND_MAESTRO3=m -CONFIG_SOUND_FORTE=m -CONFIG_SOUND_ICH=m -CONFIG_SOUND_RME96XX=m -CONFIG_SOUND_SONICVIBES=m -CONFIG_SOUND_TRIDENT=m -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -CONFIG_SOUND_VIA82CXXX=m -# CONFIG_MIDI_VIA82CXXX is not set -CONFIG_SOUND_OSS=m -# CONFIG_SOUND_TRACEINIT is not set -# CONFIG_SOUND_DMAP is not set -CONFIG_SOUND_AD1816=m -CONFIG_SOUND_AD1889=m -CONFIG_SOUND_SGALAXY=m -CONFIG_SOUND_ADLIB=m -CONFIG_SOUND_ACI_MIXER=m -CONFIG_SOUND_CS4232=m -CONFIG_SOUND_SSCAPE=m -CONFIG_SOUND_GUS=m -# CONFIG_SOUND_GUS16 is not set -# CONFIG_SOUND_GUSMAX is not set -# CONFIG_SOUND_VMIDI is not set -CONFIG_SOUND_TRIX=m -CONFIG_SOUND_MSS=m -CONFIG_SOUND_MPU401=m -CONFIG_SOUND_NM256=m -CONFIG_SOUND_MAD16=m -CONFIG_MAD16_OLDCARD=y -CONFIG_SOUND_PAS=m -# CONFIG_PAS_JOYSTICK is not set -CONFIG_SOUND_PSS=m -# CONFIG_PSS_MIXER is not set -# CONFIG_PSS_HAVE_BOOT is not set -CONFIG_SOUND_SB=m -CONFIG_SOUND_AWE32_SYNTH=m -CONFIG_SOUND_KAHLUA=m -CONFIG_SOUND_WAVEFRONT=m -CONFIG_SOUND_MAUI=m -CONFIG_SOUND_YM3812=m -CONFIG_SOUND_OPL3SA1=m -CONFIG_SOUND_OPL3SA2=m -CONFIG_SOUND_YMFPCI=m -# CONFIG_SOUND_YMFPCI_LEGACY is not set -# CONFIG_SOUND_UART6850 is not set -CONFIG_SOUND_AEDSP16=m -# CONFIG_SC6600 is not set -# CONFIG_AEDSP16_SBPRO is not set -# CONFIG_AEDSP16_MSS is not set -# CONFIG_AEDSP16_MPU401 is not set -# CONFIG_SOUND_TVMIXER is not set - -# -# USB support -# -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=m -CONFIG_USB_UHCI_ALT=m -CONFIG_USB_OHCI=m -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_TIGL=m -CONFIG_USB_BRLVGER=m -CONFIG_USB_LCD=m - -# -# Bluetooth support -# -CONFIG_BLUEZ=m -CONFIG_BLUEZ_L2CAP=m -CONFIG_BLUEZ_SCO=m -# CONFIG_BLUEZ_RFCOMM is not set -CONFIG_BLUEZ_BNEP=m -# CONFIG_BLUEZ_BNEP_MC_FILTER is not set -# CONFIG_BLUEZ_BNEP_PROTO_FILTER is not set - -# -# Bluetooth device drivers -# -CONFIG_BLUEZ_HCIUSB=m -# CONFIG_BLUEZ_USB_SCO is not set -# CONFIG_BLUEZ_USB_ZERO_PACKET is not set -CONFIG_BLUEZ_HCIUART=m -CONFIG_BLUEZ_HCIUART_H4=y -CONFIG_BLUEZ_HCIUART_BCSP=y -CONFIG_BLUEZ_HCIUART_BCSP_TXCRC=y -# CONFIG_BLUEZ_HCIDTL1 is not set -# CONFIG_BLUEZ_HCIBT3C is not set -# CONFIG_BLUEZ_HCIBLUECARD is not set -# CONFIG_BLUEZ_HCIBTUART is not set -CONFIG_BLUEZ_HCIVHCI=m - -# -# Windows Applications support -# -# CONFIG_MKI is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/x86/gss-config b/src/livecd/profiles/x86/gss-config deleted file mode 100644 index 98f97ccc97..0000000000 --- a/src/livecd/profiles/x86/gss-config +++ /dev/null @@ -1,933 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODVERSIONS=y -CONFIG_KMOD=y - -# -# Processor type and features -# -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -# CONFIG_MPPRO31 is not set -# CONFIG_M68631 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MK8 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_MVIAC3_2 is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -CONFIG_TOSHIBA=m -CONFIG_I8K=m -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -CONFIG_1GB=y -# CONFIG_2GB is not set -# CONFIG_3GB is not set -# CONFIG_05GB is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -# CONFIG_PCMCIA is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -# CONFIG_ACPI_ASUS is not set -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set -# CONFIG_ACPI_RELAXED_AML is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play configuration -# -# CONFIG_PNP is not set -# CONFIG_ISAPNP is not set - -# -# Block devices -# -CONFIG_BLK_DEV_FD=y -# CONFIG_BLK_DEV_XD is not set -# CONFIG_PARIDE is not set -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -# CONFIG_CISS_MONITOR_THREAD is not set -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -# CONFIG_EVMS is not set -# CONFIG_EVMS_LOCAL_DEV_MGR is not set -# CONFIG_EVMS_DOS_SEGMENT_MGR is not set -# CONFIG_EVMS_GPT_SEGMENT_MGR is not set -# CONFIG_EVMS_SNAPSHOT is not set -# CONFIG_EVMS_DRIVELINK is not set -# CONFIG_EVMS_BBR is not set -# CONFIG_EVMS_LVM is not set -# CONFIG_EVMS_MD is not set -# CONFIG_EVMS_MD_LINEAR is not set -# CONFIG_EVMS_MD_RAID0 is not set -# CONFIG_EVMS_MD_RAID1 is not set -# CONFIG_EVMS_MD_RAID5 is not set -# CONFIG_EVMS_AIX is not set -# CONFIG_EVMS_OS2 is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set -# CONFIG_BLK_DEV_MD is not set -# CONFIG_MD_LINEAR is not set -# CONFIG_MD_RAID0 is not set -# CONFIG_MD_RAID1 is not set -# CONFIG_MD_RAID5 is not set -# CONFIG_MD_MULTIPATH is not set -# CONFIG_BLK_DEV_LVM is not set - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -# CONFIG_NETFILTER is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_IPV6=y -# CONFIG_KHTTPD is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IPV6_SCTP__=y -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_LLC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_IPSEC is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -CONFIG_BLK_DEV_ADMA100=m -CONFIG_BLK_DEV_AEC62XX=y -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_TRIFLEX=y -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX_OLD=y -# CONFIG_PDC202XX_BURST is not set -CONFIG_BLK_DEV_PDC202XX_NEW=y -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_SC1200=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIIMAGE=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_PDC202XX=y -CONFIG_BLK_DEV_IDE_MODES=y -# CONFIG_BLK_DEV_ATARAID is not set -# CONFIG_BLK_DEV_ATARAID_PDC is not set -# CONFIG_BLK_DEV_ATARAID_HPT is not set -# CONFIG_BLK_DEV_ATARAID_SII is not set - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_BUILD_FIRMWARE is not set -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -# CONFIG_SCSI_SYM53C8XX is not set -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_BOOT is not set -# CONFIG_FUSION_ISENSE is not set -# CONFIG_FUSION_CTL is not set -# CONFIG_FUSION_LAN is not set - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -CONFIG_EQUALIZER=m -# CONFIG_TUN is not set -CONFIG_ETHERTAP=m - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_MYRI_SBUS is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -# CONFIG_INPUT_EVDEV is not set - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_ECC is not set -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -# CONFIG_SERIAL_NONSTANDARD is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_IPMI_PANIC_EVENT is not set -# CONFIG_IPMI_DEVICE_INTERFACE is not set -# CONFIG_IPMI_KCS is not set -# CONFIG_IPMI_WATCHDOG is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_SCx200_GPIO is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set - -# -# Direct Rendering Manager (XFree86 DRI support) -# -# CONFIG_DRM is not set -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -# CONFIG_HFSPLUS_FS is not set -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -CONFIG_VXFS_FS=m -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_XFS_FS is not set -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_DMAPI is not set -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_ROOT_NFS is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -CONFIG_NCP_FS=m -CONFIG_NCPFS_PACKET_SIGNING=y -CONFIG_NCPFS_IOCTL_LOCKING=y -CONFIG_NCPFS_STRONG=y -CONFIG_NCPFS_NFS_NS=y -CONFIG_NCPFS_OS2_NS=y -CONFIG_NCPFS_SMALLDOS=y -CONFIG_NCPFS_NLS=y -CONFIG_NCPFS_EXTRAS=y -# CONFIG_ZISOFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_IMON=m -CONFIG_EXECOUNT=y - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -CONFIG_VIDEO_SELECT=y -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -CONFIG_FB=y -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FB_LOGO_TUX is not set -# CONFIG_FB_LOGO_LARRY is not set -# CONFIG_FB_LOGO_GENTOO is not set -# CONFIG_FB_LOGO_G is not set -# CONFIG_FB_LOGO_PENGUIN is not set -CONFIG_FB_LOGO_POWEREDBY=y -# CONFIG_FB_RIVA is not set -# CONFIG_FB_CLGEN is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_VESA=y -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_HGA is not set -CONFIG_VIDEO_SELECT=y -# CONFIG_FB_MATROX is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_INTEL is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_FBCON_SPLASHSCREEN=y -CONFIG_FBCON_CFB16=y -# CONFIG_FBCON_ADVANCED is not set -CONFIG_FBCON_CFB8=y -CONFIG_FBCON_CFB16=y -CONFIG_FBCON_CFB24=y -CONFIG_FBCON_CFB32=y -# CONFIG_FBCON_FONTWIDTH8_ONLY is not set -# CONFIG_FBCON_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB is not set - -# -# Bluetooth support -# -# CONFIG_BLUEZ is not set - -# -# Windows Applications support -# -# CONFIG_MKI is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set -CONFIG_LOG_BUF_SHIFT=0 - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -# CONFIG_CRC32 is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -# CONFIG_FW_LOADER is not set diff --git a/src/livecd/profiles/x86/help.msg b/src/livecd/profiles/x86/help.msg deleted file mode 100644 index 2271b688dd..0000000000 --- a/src/livecd/profiles/x86/help.msg +++ /dev/null @@ -1,25 +0,0 @@ -Gentoo Linux 1.4 LiveCD boot options - [F1 to redisplay boot graphic] - -At the prompt type "gentoo option" -available at prompt "gentoo,acpi,memtest" -or just hit enter if no options are needed. -Type "acpi option" at a prompt to enable acpi on the default gentoo kernel - -agpgart loads agpgart (use if you have graphic problems,lockups) -doscsi scan for scsi devices (breaks some ethernet cards) -nodetect causes hwsetup/kudzu and hotplug not to run -dofirewire modprobes firewire modules in initrd (for firewire cdroms,etc) -nousb disables usb module load from initrd, disables hotplug -nodhcp dhcp does not automatically start if nic detected -doataraid loads ide raid modules from initrd -dopcmcia starts pcmcia service -noapm disables apm module load -noraid disables loading of evms modules -nohotplug disables loading hotplug service -ide=nodma Force disabling of dma for malfunctioning ide devices -cdcache Cache the entire runtime portion of cd in ram, This - uses 40mb of RAM , but allows you to umount /mnt/cdrom - and mount another cdrom. -noraid disables autoloading of evms modules -dokeymap enable keymap selection for non-us keyboard layouts -noapic disable apic (try if having hardware problems ,nics,scsi,etc) diff --git a/src/livecd/profiles/x86/isolinux.cfg b/src/livecd/profiles/x86/isolinux.cfg deleted file mode 100644 index be5afe9b92..0000000000 --- a/src/livecd/profiles/x86/isolinux.cfg +++ /dev/null @@ -1,25 +0,0 @@ -default gentoo - -#timeout 150 -prompt 1 -display boot.msg -#display boot1.msg -F1 boot.msg -F2 help.msg - -label gentoo - kernel gentoo - append splash=silent noX vga=791 initrd=initrd acpi=off root=/dev/ram0 init=/linuxrc nomce - -label smp - kernel smp - append splash=silent vga=791 initrd=initrd acpi=on root=/dev/ram0 init=/linuxrc nomce - -label nofb - kernel gentoo - append vga=normal initrd=initrd acpi=off root=/dev/ram0 init=/linuxrc nomce - -label memtest - kernel memtest - - diff --git a/src/livecd/profiles/x86/kern-packages b/src/livecd/profiles/x86/kern-packages deleted file mode 100644 index 92c0947529..0000000000 --- a/src/livecd/profiles/x86/kern-packages +++ /dev/null @@ -1,4 +0,0 @@ -#### packages installed after kernel, use ^package_name for experimental version #### -sys-apps/iproute -net-dialup/ppp -^usbutils diff --git a/src/livecd/profiles/x86/kernel-config b/src/livecd/profiles/x86/kernel-config deleted file mode 100644 index f242fed0cd..0000000000 --- a/src/livecd/profiles/x86/kernel-config +++ /dev/null @@ -1,1539 +0,0 @@ -# -# Automatically generated by make menuconfig: don't edit -# -CONFIG_X86=y -# CONFIG_SBUS is not set -CONFIG_UID16=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODVERSIONS=y -CONFIG_KMOD=y - -# -# Processor type and features -# -# CONFIG_LOLAT is not set -# CONFIG_LOLAT_SYSCTL is not set -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M586MMX31 is not set -# CONFIG_M686 is not set -# CONFIG_MPPRO31 is not set -# CONFIG_M68631 is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMIII31 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUM431 is not set -# CONFIG_MK6 is not set -# CONFIG_MK6231 is not set -# CONFIG_MK7 is not set -# CONFIG_MK731 is not set -# CONFIG_MXP31 is not set -# CONFIG_MMP31 is not set -# CONFIG_MK8 is not set -# CONFIG_MELAN is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_MVIAC3_2 is not set -# CONFIG_X86_CMPXCHG is not set -# CONFIG_X86_XADD is not set -CONFIG_X86_L1_CACHE_SHIFT=4 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_X86_PPRO_FENCE=y -# CONFIG_X86_F00F_WORKS_OK is not set -# CONFIG_X86_MCE is not set -CONFIG_TOSHIBA=m -CONFIG_I8K=m -CONFIG_THINKPAD=m -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGHMEM is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_SMP is not set -CONFIG_PREEMPT=y -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_UP_IOAPIC is not set -# CONFIG_X86_TSC_DISABLE is not set - -# -# General setup -# -CONFIG_NET=y -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_ISA=y -CONFIG_PCI_NAMES=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -CONFIG_HOTPLUG=y - -# -# PCMCIA/CardBus support -# -# CONFIG_PCMCIA is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI_IBM is not set -# CONFIG_HOTPLUG_PCI_ACPI is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_KCORE_ELF=y -# CONFIG_KCORE_AOUT is not set -CONFIG_BINFMT_AOUT=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_APM=m -CONFIG_APM_IGNORE_USER_SUSPEND=y -CONFIG_APM_DO_ENABLE=y -CONFIG_APM_CPU_IDLE=y -CONFIG_APM_DISPLAY_BLANK=y -CONFIG_APM_RTC_IS_GMT=y -CONFIG_APM_ALLOW_INTS=y -CONFIG_APM_REAL_MODE_POWER_OFF=y - -# -# ACPI Support -# -CONFIG_ACPI=y -# CONFIG_ACPI_HT_ONLY is not set -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_BUS=y -CONFIG_ACPI_INTERPRETER=y -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_TOSHIBA=m -# CONFIG_ACPI_DEBUG is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_AMIGA is not set -# CONFIG_PARPORT_MFC3 is not set -# CONFIG_PARPORT_ATARI is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_SUNBPP is not set -CONFIG_PARPORT_OTHER=y -CONFIG_PARPORT_1284=y - -# -# Plug and Play configuration -# -CONFIG_PNP=m -CONFIG_ISAPNP=m - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_BLK_DEV_XD is not set -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -CONFIG_BLK_STATS=y - -# -# Enterprise Volume Management System -# -CONFIG_EVMS=m -CONFIG_EVMS_LOCAL_DEV_MGR=m -CONFIG_EVMS_DOS_SEGMENT_MGR=m -# CONFIG_EVMS_GPT_SEGMENT_MGR is not set -CONFIG_EVMS_SNAPSHOT=m -CONFIG_EVMS_DRIVELINK=m -CONFIG_EVMS_BBR=m -CONFIG_EVMS_LVM=m -CONFIG_EVMS_MD=m -CONFIG_EVMS_MD_LINEAR=m -CONFIG_EVMS_MD_RAID0=m -CONFIG_EVMS_MD_RAID1=m -CONFIG_EVMS_MD_RAID5=m -CONFIG_EVMS_AIX=m -# CONFIG_EVMS_OS2 is not set -# CONFIG_EVMS_INFO_CRITICAL is not set -# CONFIG_EVMS_INFO_SERIOUS is not set -# CONFIG_EVMS_INFO_ERROR is not set -# CONFIG_EVMS_INFO_WARNING is not set -CONFIG_EVMS_INFO_DEFAULT=y -# CONFIG_EVMS_INFO_DETAILS is not set -# CONFIG_EVMS_INFO_DEBUG is not set -# CONFIG_EVMS_INFO_EXTRA is not set -# CONFIG_EVMS_INFO_ENTRY_EXIT is not set -# CONFIG_EVMS_INFO_EVERYTHING is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID5=m -CONFIG_MD_MULTIPATH=m -CONFIG_BLK_DEV_LVM=m - -# -# Cryptography support (CryptoAPI) -# -CONFIG_CRYPTO=m -CONFIG_CIPHERS=y -CONFIG_CIPHER_AES=m -CONFIG_CIPHER_MARS=m -CONFIG_CIPHER_RC6=m -CONFIG_CIPHER_SERPENT=m -CONFIG_CIPHER_TWOFISH=m -CONFIG_CIPHER_3DES=m -CONFIG_CIPHER_BLOWFISH=m -CONFIG_CIPHER_CAST5=m -CONFIG_CIPHER_GOST=m -CONFIG_CIPHER_IDEA=m -CONFIG_CIPHER_RC5=m -CONFIG_CIPHER_NULL=m -CONFIG_CIPHER_DES=m -CONFIG_CIPHER_DFC=m -CONFIG_CIPHER_BLOWFISH_OLD=m -CONFIG_DIGESTS=y -CONFIG_DIGEST_MD5=m -CONFIG_DIGEST_SHA1=m -CONFIG_DIGEST_RIPEMD160=m -CONFIG_DIGEST_SHA256=m -CONFIG_DIGEST_SHA384=m -CONFIG_DIGEST_SHA512=m -CONFIG_CRYPTODEV=y -CONFIG_CRYPTOLOOP=m -CONFIG_CRYPTOLOOP_ATOMIC=y -CONFIG_CRYPTOLOOP_IV_HACK=y -CONFIG_CRYPTOLOOP_DEBUG=y -CONFIG_IPSEC_TUNNEL=m - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_NAT_LOCAL=y -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -# CONFIG_IP_NF_COMPAT_IPCHAINS is not set -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IPV6=y - -# -# IPv6: Netfilter Configuration -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -# CONFIG_KHTTPD is not set -# CONFIG_ATM is not set -CONFIG_VLAN_8021Q=m -CONFIG_IPX=m -CONFIG_IPX_INTERN=y -# CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set -CONFIG_DECNET=m -# CONFIG_DECNET_SIOCGIFCONF is not set -# CONFIG_DECNET_ROUTER is not set -CONFIG_BRIDGE=m -CONFIG_X25=m -CONFIG_LAPB=m -CONFIG_LLC=y -CONFIG_NET_DIVERT=y -CONFIG_ECONET=m -# CONFIG_ECONET_AUNUDP is not set -# CONFIG_ECONET_NATIVE is not set -CONFIG_WAN_ROUTER=m -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_IPSEC is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_IDEDISK_STROKE=y -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -# CONFIG_BLK_DEV_ISAPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_PCI_WIP is not set -CONFIG_BLK_DEV_ADMA100=y -CONFIG_BLK_DEV_AEC62XX=y -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_AMD74XX_OVERRIDE is not set -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_TRIFLEX=y -CONFIG_BLK_DEV_CY82C693=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT34X=y -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_OPTI621=y -CONFIG_BLK_DEV_PDC202XX_OLD=y -# CONFIG_PDC202XX_BURST is not set -CONFIG_BLK_DEV_PDC202XX_NEW=y -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_SC1200=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIIMAGE=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_DMA_NONPCI is not set -CONFIG_BLK_DEV_PDC202XX=y -CONFIG_BLK_DEV_IDE_MODES=y -CONFIG_BLK_DEV_ATARAID=m -CONFIG_BLK_DEV_ATARAID_PDC=m -CONFIG_BLK_DEV_ATARAID_HPT=m -CONFIG_BLK_DEV_ATARAID_SII=m - -# -# SCSI support -# -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SD_EXTRA_DEVS=40 -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_SR_EXTRA_DEVS=2 -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_DEBUG_QUEUES=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_PROBE_EISA_VL=y -# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_BUILD_FIRMWARE is not set -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set -CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 -# CONFIG_AIC7XXX_OLD_PROC_STATS is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_MEGARAID=m -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_CPQFCTS=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_EATA_DMA=m -CONFIG_SCSI_EATA_PIO=m -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_G_NCR5380_PORT=y -# CONFIG_SCSI_G_NCR5380_MEM is not set -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -CONFIG_SCSI_IZIP_EPP16=y -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_NCR53C7xx=m -# CONFIG_SCSI_NCR53C7xx_sync is not set -# CONFIG_SCSI_NCR53C7xx_FAST is not set -# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_NCR53C8XX=m -# CONFIG_SCSI_SYM53C8XX is not set -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_PCI2000=m -CONFIG_SCSI_PCI2220I=m -CONFIG_SCSI_PSI240I=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_ISP=m -CONFIG_SCSI_QLOGIC_FC=m -CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_SEAGATE=m -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC390T=m -# CONFIG_SCSI_DC390T_NOGENSUPP is not set -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -CONFIG_SCSI_NSP32=m -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -# CONFIG_FUSION_BOOT is not set -CONFIG_FUSION_MAX_SGE=40 -CONFIG_FUSION_ISENSE=m -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_NET_FC=y - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_I2O_PCI is not set -# CONFIG_I2O_BLOCK is not set -# CONFIG_I2O_LAN is not set -# CONFIG_I2O_SCSI is not set -# CONFIG_I2O_PROC is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -CONFIG_EQUALIZER=y -CONFIG_TUN=m -CONFIG_ETHERTAP=y -CONFIG_NET_SB1000=m - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_SUNLANCE is not set -CONFIG_HAPPYMEAL=m -# CONFIG_SUNBMAC is not set -# CONFIG_SUNQE is not set -CONFIG_SUNGEM=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL1=m -CONFIG_EL2=m -CONFIG_ELPLUS=m -CONFIG_EL16=m -CONFIG_EL3=m -CONFIG_3C515=m -# CONFIG_ELMC is not set -# CONFIG_ELMC_II is not set -CONFIG_VORTEX=m -CONFIG_TYPHOON=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -# CONFIG_ULTRAMCA is not set -CONFIG_ULTRA=m -# CONFIG_ULTRA32 is not set -CONFIG_SMC9194=m -CONFIG_NET_VENDOR_RACAL=y -CONFIG_NI5010=m -CONFIG_NI52=m -CONFIG_NI65=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -CONFIG_E2100=m -CONFIG_EWRK3=m -CONFIG_EEXPRESS=m -CONFIG_EEXPRESS_PRO=m -CONFIG_HPLAN_PLUS=m -CONFIG_HPLAN=m -CONFIG_LP486E=m -CONFIG_ETH16I=m -CONFIG_NE2000=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_AMD8111_ETH=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_NET_BCM4400=m -CONFIG_CS89x0=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_DE4X5=m -CONFIG_DGRS=m -CONFIG_DM9102=m -CONFIG_EEPRO100=m -# CONFIG_EEPRO100_PIO is not set -CONFIG_E100=m -# CONFIG_LNE390 is not set -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -# CONFIG_NE3210 is not set -# CONFIG_ES3210 is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_TC35815=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_WINBOND_840=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_MYRI_SBUS is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_R8169=m -CONFIG_SK98LIN=m -CONFIG_NET_BROADCOM=m -CONFIG_TIGON3=m -CONFIG_FDDI=y -CONFIG_DEFXX=m -CONFIG_SKFP=m -CONFIG_HIPPI=y -CONFIG_ROADRUNNER=m -# CONFIG_ROADRUNNER_LARGE_RINGS is not set -CONFIG_PLIP=m -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_STRIP is not set -# CONFIG_WAVELAN is not set -# CONFIG_ARLAN is not set -# CONFIG_AIRONET4500 is not set -# CONFIG_AIRONET4500_NONCS is not set -# CONFIG_AIRONET4500_PROC is not set -# CONFIG_AIRO is not set -# CONFIG_HERMES is not set -# CONFIG_PLX_HERMES is not set -# CONFIG_PCI_HERMES is not set -CONFIG_NET_WIRELESS=y - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMTR=m -CONFIG_IBMOL=m -CONFIG_IBMLS=m -CONFIG_3C359=m -# CONFIG_TMS380TR is not set -CONFIG_SMCTR=m -CONFIG_NET_FC=y -# CONFIG_IPHASE5526 is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_IRDA_DEBUG=y - -# -# Infrared-port device drivers -# -CONFIG_IRTTY_SIR=m -CONFIG_IRPORT_SIR=m -CONFIG_DONGLE=y -CONFIG_ESI_DONGLE=m -CONFIG_ACTISYS_DONGLE=m -CONFIG_TEKRAM_DONGLE=m -CONFIG_GIRBIL_DONGLE=m -CONFIG_LITELINK_DONGLE=m -CONFIG_MCP2120_DONGLE=m -CONFIG_OLD_BELKIN_DONGLE=m -CONFIG_ACT200L_DONGLE=m -CONFIG_MA600_DONGLE=m -CONFIG_USB_IRDA=m -CONFIG_NSC_FIR=m -CONFIG_WINBOND_FIR=m -# CONFIG_TOSHIBA_OLD is not set -CONFIG_TOSHIBA_FIR=m -CONFIG_SMC_IRCC_FIR=m -CONFIG_ALI_FIR=m -CONFIG_VLSI_FIR=m - -# -# ISDN subsystem -# -CONFIG_ISDN=m -CONFIG_ISDN_BOOL=y -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_ISDN_PPP_BSDCOMP=m -# CONFIG_ISDN_AUDIO is not set -# CONFIG_ISDN_X25 is not set - -# -# ISDN feature submodules -# -CONFIG_ISDN_DRV_LOOP=m -CONFIG_ISDN_DIVERSION=m - -# -# Passive ISDN cards -# -CONFIG_ISDN_DRV_HISAX=m -CONFIG_ISDN_HISAX=y -CONFIG_HISAX_EURO=y -# CONFIG_DE_AOC is not set -CONFIG_HISAX_NO_SENDCOMPLETE=y -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -# CONFIG_HISAX_1TR6 is not set -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -CONFIG_HISAX_DEBUG=y -# CONFIG_HISAX_SEDLBAUER_CS is not set -# CONFIG_HISAX_ELSA_CS is not set -# CONFIG_HISAX_AVM_A1_CS is not set -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_FRITZ_PCIPNP=m -CONFIG_USB_AUERISDN=m - -# -# Active ISDN cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_DRV_EICON=y -CONFIG_ISDN_DRV_EICON_DIVAS=m -# CONFIG_ISDN_DRV_EICON_OLD is not set -CONFIG_ISDN_DRV_TPAM=m -CONFIG_ISDN_CAPI=m -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_CAPI_MIDDLEWARE is not set -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIDRV=m -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input core support -# -CONFIG_INPUT=y -CONFIG_INPUT_KEYBDEV=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=m - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_ECC is not set -CONFIG_VT_CONSOLE=y -CONFIG_SERIAL=m -# CONFIG_SERIAL_EXTENDED is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_DIGIEPCA=m -CONFIG_ESPSERIAL=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SPECIALIX_RTSCTS=y -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -# CONFIG_STALDRV is not set -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set - -# -# I2C support -# -CONFIG_I2C=m -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -CONFIG_I2C_MAINBOARD=y -CONFIG_I2C_ALI1535=m -CONFIG_I2C_ALI15X3=m -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_AMD756=m -CONFIG_I2C_AMD8111=m -# CONFIG_I2C_TSUNAMI is not set -CONFIG_I2C_I801=m -# CONFIG_I2C_I810 is not set -CONFIG_I2C_PIIX4=m -CONFIG_I2C_SIS5595=m -CONFIG_I2C_SIS630=m -CONFIG_I2C_SIS645=m -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_VIA is not set -CONFIG_I2C_VIAPRO=m -# CONFIG_I2C_VOODOO3 is not set -CONFIG_I2C_ISA=m -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_PROC=m - -# -# Hardware sensors support -# -CONFIG_SENSORS=y -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1024=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM9240=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_FSCPOS=m -CONFIG_SENSORS_FSCSCY=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_MAXILIFE=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_MTP008=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_SIS5595=m -CONFIG_SENSORS_SMSC47M1=m -CONFIG_SENSORS_THMC50=m -CONFIG_SENSORS_VIA686A=m -CONFIG_SENSORS_VT1211=m -CONFIG_SENSORS_VT8231=m -CONFIG_SENSORS_W83781D=m -# CONFIG_SENSORS_OTHER is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -CONFIG_MOUSE=y -CONFIG_PSMOUSE=y -CONFIG_82C710_MOUSE=m -# CONFIG_PC110_PAD is not set -# CONFIG_MK712_MOUSE is not set - -# -# Joysticks -# -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_NS558 is not set -# CONFIG_INPUT_LIGHTNING is not set -# CONFIG_INPUT_PCIGAME is not set -# CONFIG_INPUT_CS461X is not set -# CONFIG_INPUT_EMU10K1 is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_SERPORT is not set -# CONFIG_INPUT_ANALOG is not set -# CONFIG_INPUT_A3D is not set -# CONFIG_INPUT_ADI is not set -# CONFIG_INPUT_COBRA is not set -# CONFIG_INPUT_GF2K is not set -# CONFIG_INPUT_GRIP is not set -# CONFIG_INPUT_INTERACT is not set -# CONFIG_INPUT_TMDC is not set -# CONFIG_INPUT_SIDEWINDER is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_IFORCE_232 is not set -# CONFIG_INPUT_WARRIOR is not set -# CONFIG_INPUT_MAGELLAN is not set -# CONFIG_INPUT_SPACEORB is not set -# CONFIG_INPUT_SPACEBALL is not set -# CONFIG_INPUT_STINGER is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_QIC02_TAPE is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_IPMI_PANIC_EVENT is not set -# CONFIG_IPMI_DEVICE_INTERFACE is not set -# CONFIG_IPMI_KCS is not set -# CONFIG_IPMI_WATCHDOG is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_SCx200_GPIO is not set -# CONFIG_AMD_RNG is not set -# CONFIG_INTEL_RNG is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -CONFIG_AGP=m -CONFIG_AGP_INTEL=y -CONFIG_AGP_I810=y -CONFIG_AGP_VIA=y -CONFIG_AGP_AMD=y -CONFIG_AGP_AMD_8151=y -CONFIG_AGP_SIS=y -CONFIG_AGP_ALI=y -CONFIG_AGP_SWORKS=y -CONFIG_AGP_NV=y -# CONFIG_DRM is not set -# CONFIG_MWAVE is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# File systems -# -# CONFIG_QUOTA is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -# CONFIG_QIFACE_COMPAT is not set -# CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EXT3_FS=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_UMSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_EFS_FS=m -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m -CONFIG_TMPFS=y -CONFIG_RAMFS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_JFS_FS=m -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_MINIX_FS=m -CONFIG_VXFS_FS=m -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -CONFIG_HPFS_FS=m -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS is not set -CONFIG_QNX4FS_FS=m -# CONFIG_QNX4FS_RW is not set -CONFIG_ROMFS_FS=m -CONFIG_EXT2_FS=y -CONFIG_SYSV_FS=m -CONFIG_UDF_FS=m -# CONFIG_UDF_RW is not set -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -CONFIG_XFS_FS=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -CONFIG_XFS_QUOTA=y -CONFIG_XFS_DMAPI=y -# CONFIG_XFS_DEBUG is not set -# CONFIG_PAGEBUF_DEBUG is not set - -# -# Network File Systems -# -CONFIG_CODA_FS=m -# CONFIG_INTERMEZZO_FS is not set -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_ROOT_NFS is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_TCP is not set -CONFIG_SUNRPC=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -CONFIG_NCP_FS=m -CONFIG_NCPFS_PACKET_SIGNING=y -CONFIG_NCPFS_IOCTL_LOCKING=y -CONFIG_NCPFS_STRONG=y -CONFIG_NCPFS_NFS_NS=y -CONFIG_NCPFS_OS2_NS=y -CONFIG_NCPFS_SMALLDOS=y -CONFIG_NCPFS_NLS=y -CONFIG_NCPFS_EXTRAS=y -CONFIG_ZISOFS_FS=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SMB_NLS=y -CONFIG_NLS=y - -# -# Native Language Support -# -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_IMON=m -CONFIG_EXECOUNT=y - -# -# Console drivers -# -CONFIG_VGA_CONSOLE=y -CONFIG_VIDEO_SELECT=y -# CONFIG_MDA_CONSOLE is not set - -# -# Frame-buffer support -# -CONFIG_FB=y -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FB_LOGO_TUX is not set -# CONFIG_FB_LOGO_LARRY is not set -# CONFIG_FB_LOGO_GENTOO is not set -# CONFIG_FB_LOGO_G is not set -# CONFIG_FB_LOGO_PENGUIN is not set -CONFIG_FB_LOGO_POWEREDBY=y -# CONFIG_FB_RIVA is not set -# CONFIG_FB_CLGEN is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_VESA=y -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_HGA is not set -CONFIG_VIDEO_SELECT=y -# CONFIG_FB_MATROX is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_INTEL is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_FBCON_SPLASHSCREEN=y -CONFIG_FBCON_CFB16=y -# CONFIG_FBCON_ADVANCED is not set -CONFIG_FBCON_CFB8=y -CONFIG_FBCON_CFB16=y -CONFIG_FBCON_CFB24=y -CONFIG_FBCON_CFB32=y -# CONFIG_FBCON_FONTWIDTH8_ONLY is not set -# CONFIG_FBCON_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_SOUND_ALI5455=m -CONFIG_SOUND_BT878=m -CONFIG_SOUND_CMPCI=m -# CONFIG_SOUND_CMPCI_FM is not set -# CONFIG_SOUND_CMPCI_MIDI is not set -# CONFIG_SOUND_CMPCI_JOYSTICK is not set -# CONFIG_SOUND_CMPCI_CM8738 is not set -CONFIG_SOUND_EMU10K1=m -# CONFIG_MIDI_EMU10K1 is not set -CONFIG_SOUND_FUSION=m -CONFIG_SOUND_CS4281=m -CONFIG_SOUND_ES1370=m -CONFIG_SOUND_ES1371=m -CONFIG_SOUND_ESSSOLO1=m -CONFIG_SOUND_MAESTRO=m -CONFIG_SOUND_MAESTRO3=m -CONFIG_SOUND_FORTE=m -CONFIG_SOUND_ICH=m -CONFIG_SOUND_RME96XX=m -CONFIG_SOUND_SONICVIBES=m -CONFIG_SOUND_TRIDENT=m -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -CONFIG_SOUND_VIA82CXXX=m -# CONFIG_MIDI_VIA82CXXX is not set -CONFIG_SOUND_OSS=m -# CONFIG_SOUND_TRACEINIT is not set -# CONFIG_SOUND_DMAP is not set -CONFIG_SOUND_AD1816=m -CONFIG_SOUND_AD1889=m -CONFIG_SOUND_SGALAXY=m -CONFIG_SOUND_ADLIB=m -CONFIG_SOUND_ACI_MIXER=m -CONFIG_SOUND_CS4232=m -CONFIG_SOUND_SSCAPE=m -CONFIG_SOUND_GUS=m -# CONFIG_SOUND_GUS16 is not set -# CONFIG_SOUND_GUSMAX is not set -# CONFIG_SOUND_VMIDI is not set -CONFIG_SOUND_TRIX=m -CONFIG_SOUND_MSS=m -CONFIG_SOUND_MPU401=m -CONFIG_SOUND_NM256=m -CONFIG_SOUND_MAD16=m -CONFIG_MAD16_OLDCARD=y -CONFIG_SOUND_PAS=m -# CONFIG_PAS_JOYSTICK is not set -CONFIG_SOUND_PSS=m -# CONFIG_PSS_MIXER is not set -# CONFIG_PSS_HAVE_BOOT is not set -CONFIG_SOUND_SB=m -CONFIG_SOUND_AWE32_SYNTH=m -CONFIG_SOUND_KAHLUA=m -CONFIG_SOUND_WAVEFRONT=m -CONFIG_SOUND_MAUI=m -CONFIG_SOUND_YM3812=m -CONFIG_SOUND_OPL3SA1=m -CONFIG_SOUND_OPL3SA2=m -CONFIG_SOUND_YMFPCI=m -# CONFIG_SOUND_YMFPCI_LEGACY is not set -# CONFIG_SOUND_UART6850 is not set -CONFIG_SOUND_AEDSP16=m -# CONFIG_SC6600 is not set -# CONFIG_AEDSP16_SBPRO is not set -# CONFIG_AEDSP16_MSS is not set -# CONFIG_AEDSP16_MPU401 is not set -# CONFIG_SOUND_TVMIXER is not set - -# -# USB support -# -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_UHCI=m -CONFIG_USB_UHCI_ALT=m -CONFIG_USB_OHCI=m -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_DC2XX is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_KAWETH=m -CONFIG_USB_CATC=m -CONFIG_USB_CDCETHER=m -CONFIG_USB_USBNET=m -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_TIGL=m -CONFIG_USB_BRLVGER=m -CONFIG_USB_LCD=m - -# -# Bluetooth support -# -CONFIG_BLUEZ=m -CONFIG_BLUEZ_L2CAP=m -CONFIG_BLUEZ_SCO=m -# CONFIG_BLUEZ_RFCOMM is not set -CONFIG_BLUEZ_BNEP=m -# CONFIG_BLUEZ_BNEP_MC_FILTER is not set -# CONFIG_BLUEZ_BNEP_PROTO_FILTER is not set - -# -# Bluetooth device drivers -# -CONFIG_BLUEZ_HCIUSB=m -# CONFIG_BLUEZ_USB_SCO is not set -# CONFIG_BLUEZ_USB_ZERO_PACKET is not set -CONFIG_BLUEZ_HCIUART=m -CONFIG_BLUEZ_HCIUART_H4=y -CONFIG_BLUEZ_HCIUART_BCSP=y -CONFIG_BLUEZ_HCIUART_BCSP_TXCRC=y -# CONFIG_BLUEZ_HCIDTL1 is not set -# CONFIG_BLUEZ_HCIBT3C is not set -# CONFIG_BLUEZ_HCIBLUECARD is not set -# CONFIG_BLUEZ_HCIBTUART is not set -CONFIG_BLUEZ_HCIVHCI=m - -# -# Windows Applications support -# -# CONFIG_MKI is not set - -# -# Kernel hacking -# -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_IOVIRT is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_KDB is not set -# CONFIG_KDB_MODULES is not set -# CONFIG_KALLSYMS is not set - -# -# Library routines -# -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m diff --git a/src/livecd/profiles/x86/keymaps/bin-keymaps.tar.gz b/src/livecd/profiles/x86/keymaps/bin-keymaps.tar.gz Binary files differdeleted file mode 100644 index 8895ca4689..0000000000 --- a/src/livecd/profiles/x86/keymaps/bin-keymaps.tar.gz +++ /dev/null diff --git a/src/livecd/profiles/x86/keymaps/key.lst b/src/livecd/profiles/x86/keymaps/key.lst deleted file mode 100644 index 7396871474..0000000000 --- a/src/livecd/profiles/x86/keymaps/key.lst +++ /dev/null @@ -1,10 +0,0 @@ -Please select a keymap from the following list by typing in the appropriate -name or number. Hit Enter for the default "us/41" US English keymap. - - 1 azerty 7 cf 13 es 19 il 25 mk 31 ru 37 trf - 2 be 8 croat 14 et 20 is 26 nl 32 se 38 trq - 3 bg 9 cz 15 fi 21 it 27 no 33 sg 39 ua - 4 br-a 10 de 16 fr 22 jp 28 pl 34 sk-y 40 uk - 5 br-l 11 dk 17 gr 23 la 29 pt 35 sk-z 41 us - 6 by 12 dvorak 18 hu 24 lt 30 ro 36 slovene 42 wangbe - diff --git a/src/livecd/profiles/x86/linuxrc b/src/livecd/profiles/x86/linuxrc deleted file mode 100644 index 77449bfb26..0000000000 --- a/src/livecd/profiles/x86/linuxrc +++ /dev/null @@ -1,278 +0,0 @@ -#!/bin/sh -# -# Script to boot up a system with autodetection of CD location -# -# Daniel Robbins <drobbins@gentoo.org> -# Copyright 2002 Gentoo Technologies, Inc. -# Distributed under the GPL - -PATH=/usr/sbin:/usr/bin:/sbin:/bin -BACK_UP="\033[1K\033[0G" -HILITE="\033[1m" -NORMAL="\033[0m" -WARN="\033[1m" -BAD="\033[1m" -mount -oremount,rw / -mount /proc -# Disable kernel messages to console: -echo "0" > /proc/sys/kernel/printk -SCSI="no" -CDCACHE="no" -IDEBUG="no" -FIREWIRE="no" -ATARAID="no" -PCMCIA="no" -DETECT="no" -USB="yes" -KEYMAP="no" -CMDLINE="`cat /proc/cmdline`" -for x in $CMDLINE -do - if [ "$x" = "doscsi" ] - then - SCSI="yes" - elif [ "$x" = "cdcache" ] - then - CDCACHE="yes" - elif [ "$x" = "idebug" ] - then - IDEBUG="yes" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "dofirewire" ] - then - FIREWIRE="yes" - fi -done -for x in $CMDLINE -do - if [ "$x" = "nousb" ] - then - USB="no" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "doataraid" ] - then - ATARAID="yes" - fi -done -for x in $CMDLINE -do - if [ "$x" = "dopcmcia" ] - then - PCMCIA="yes" - fi -done - -for x in $CMDLINE -do - if [ "$x" = "dokeymap" ] - then - KEYMAP="yes" - fi -done - -blurb() { - echo -ne ${HILITE}${1} -} - -backup() { - echo -ne "\033[0G\033[0K" -} - -# Create the new root FS -mkdir newroot -mount -t tmpfs tmpfs /newroot -cd /newroot -mkdir dev mnt mnt/cdrom mnt/cloop mnt/.init.d mnt/gentoo - -if [ ! -e /newroot/dev/.devfsd ] -then - #mount devfs - mount -t devfs devfs /newroot/dev -fi - -mounted="" - -initmsg() { - echo -e "${HILITE}${*}${NORMAL}" -} - -nocd() { - echo -e "${HILITE}---- CD not found${NORMAL}" - umount /newroot - ash - umount /proc - exec /linuxrc -} - -getkeymap() { - local mykeymap - echo -ne ${HILITE} - cat /keymaps/key.lst - echo -ne ${NORMAL} - read -p "Keymap selection: " mykeymap - if [ -e /keymaps/${mykeymap}.map ] - then - echo -e "${HILITE}---- Loading ${mykeymap} keymap${NORMAL}" - loadkmap < /keymaps/${mykeymap}.map - elif [ "$mykeymap" = "" ] - then - #default keymap is "us" - echo -e "${HILITE}---- Loading default (US) keymap${NORMAL}" - loadkmap < /keymaps/us.map - else - getkeymap - fi -} - -modules_scan() { - local type - type=${1}; shift - for x in "$@" - do - if [ ! -e /modules/${type}/${x}.o ] - then - echo -e "${HILITE}---- Module ${x}.o not found; skipping...${NORMAL}" - continue - fi - blurb "---- Scanning for ${x}..." - insmod -f /modules/${type}/${x}.o > /dev/null 2>&1 - if [ $? -eq 0 ] - then - backup - echo -e "${GOOD}---- Detected ${x} hardware${NORMAL}" - else - backup - echo -ne "${NORMAL}" - fi - done -} - -findmount() { - if [ "$*" = "" ] - then - nocd - fi - while ! mount -t iso9660 -r $1 /newroot/mnt/cdrom; do - shift - if [ "$1" = "" ]; then - nocd - fi - done - if [ ! -e /newroot/mnt/cdrom/livecd.cloop -a ! -e /newroot/mnt/cdrom/livecd.loop ]; then - echo -e "${HILITE}---- $1 is not a LiveCD; skipping...${NORMAL}" - umount /newroot/mnt/cdrom - shift - findmount $* - fi - mounted=$1 - #echo -e "${HILITE}---- CD medium found on $1${NORMAL}" -} - -# Mount the CD -if [ "$SCSI" = "yes" ] -then -DEVICE=SCSI - echo -e "${HILITE}---- Beginning storage detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan storage ##STORAGE_MODULES## -fi - -if [ "$FIREWIRE" = "yes" ] -then -DEVICE=FIREWIRE - echo -e "${HILITE}---- Beginning firewire detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan firewire ##FIREWIRE_MODULES## -fi -if [ "$ATARAID" = "yes" ] -then -DEVICE=ATARAID - echo -e "${HILITE}---- Beginning ata detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan ataraid ##ATARAID_MODULES## -fi - -if [ "$PCMCIA" = "yes" ] -then -DEVICE=PCMCIA - echo -e "${HILITE}---- Beginning pcmcia detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan pcmcia ##PCMCIA_MODULES## -fi -if [ "$USB" = "yes" ] -then -DEVICE=USB - echo -e "${HILITE}---- Beginning usb detection${NORMAL}" - # This next "## ##" gets sed tweaked: - modules_scan usb ##USB_MODULES## -fi - -if [ "$KEYMAP" = "yes" ] -then -getkeymap -fi - -#initmsg "---- Mounting the CD" -findmount /newroot/dev/cdroms/* -if [ "$IDEBUG" = "yes" ] -then - exec /bin/sh -fi -if [ -e /newroot/mnt/cdrom/livecd.cloop ] -then - #compressed loopback - mknod /dev/cloop b 240 0 - if [ "$CDCACHE" = "yes" ] - then - #initmsg "---- Attempting to cache CD image to tmpfs" - cp /newroot/mnt/cdrom/livecd.cloop /newroot/mnt/ - if [ $? -ne 0 ] - then - #initmsg "---- Caching failed (likely due to lack of space" - CDCACHE="no" - rm -f /newroot/mnt/livecd.cloop - else - insmod /modules/cloop.o file=/newroot/mnt/livecd.cloop >/dev/null 2>&1 - mount -o ro -t ext2 /dev/cloop /newroot/mnt/cloop - fi - fi - if [ "$CDCACHE" = "no" ] - then - #initmsg "---- Mounting compressed loopback filesystem" - insmod /modules/cloop.o file=/newroot/mnt/cdrom/livecd.cloop >/dev/null 2>&1 - mount -o ro -t ext2 /dev/cloop /newroot/mnt/cloop - fi -else - mknod /dev/loop0 b 7 0 - #initmsg "---- Mounting loopback filesystem" - losetup /dev/loop0 /newroot/mnt/cdrom/livecd.loop - mount -o ro -t ext2 /dev/loop0 /newroot/mnt/cloop -fi -# Now the CD is mounted on /newroot/cdrom -#initmsg "---- Copying and symlinking files from CD to populate /" - -cd /newroot/ -for x in bin sbin lib boot usr opt install.txt -do - ln -s mnt/cloop/${x} ${x} -done -mkdir initrd proc tmp -chmod 1777 tmp -(cd /newroot/mnt/cloop; cp -a etc root home var /newroot) -#store name of mounted CD so we can add it to mtab.... (/etc/init.d/local will take it -#from here... -echo $mounted > tmp/mycd - -#initmsg "---- Switching to tmpfs root filesystem" -echo "6" > /proc/sys/kernel/printk -umount /proc -pivot_root . initrd -exec chroot . /sbin/init </dev/console >/dev/console 2>&1 diff --git a/src/livecd/profiles/x86/mods b/src/livecd/profiles/x86/mods deleted file mode 100644 index c276151027..0000000000 --- a/src/livecd/profiles/x86/mods +++ /dev/null @@ -1,81 +0,0 @@ -#!/bin/bash -echo "$CD_HOSTNAME" > ${CD_BUILDCHROOT}/etc/hostname || die -#modprobe has a bug and auto-adds a "above hid keybdev mousedev" line to it's internel configuration. -#this fixes it.... -echo "above hid" > ${CD_BUILDCHROOT}/etc/modules.d/hidfix -install -d ${CD_BUILDCHROOT}/var/state/init.d || die -cp ${CD_BUILDCHROOT}/etc/init.d/net.eth0 ${CD_BUILDCHROOT}/etc/init.d/net.eth1 -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/modules ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/checkroot ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/md ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/hotplug ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/aumix ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/checkfs ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/mingetty ${CD_BUILDCHROOT}/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/autoconfig ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/usleep ${CD_BUILDCHROOT}/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/login.defs ${CD_BUILDCHROOT}/etc || die -cat ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/splash.sh >> ${CD_BUILDCHROOT}/sbin/functions.sh || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/bootsplash-1024x768.cfg ${CD_BUILDCHROOT}/etc/bootsplash/gentoo/config || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/local ${CD_BUILDCHROOT}/etc/init.d || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fstab ${CD_BUILDCHROOT}/etc || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/net-setup ${CD_BUILDCHROOT}/usr/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/profile ${CD_BUILDCHROOT}/etc || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/net ${CD_BUILDCHROOT}/etc/conf.d || die -mv ${CD_BUILDCHROOT}/sbin/splash ${CD_BUILDCHROOT}/sbin/splash.bin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/splash ${CD_BUILDCHROOT}/sbin/ || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/rc ${CD_BUILDCHROOT}/sbin/ || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fbtruetype.static ${CD_BUILDCHROOT}/sbin/ || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fbtruetype.static ${CD_BUILDCHROOT}/sbin/fbtruetype || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/fbresolution ${CD_BUILDCHROOT}/sbin || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/splash.bin ${CD_BUILDCHROOT}/sbin || die -rm -f ${CD_BUILDCHROOT}/usr/share/hwdata/pci.ids -rm -f ${CD_BUILDCHROOT}/usr/share/hwdata/usb.ids -ln -s /usr/share/misc/pci.ids ${CD_BUILDCHROOT}/usr/share/hwdata/pci.ids -ln -s /usr/share/misc/usb.ids ${CD_BUILDCHROOT}/usr/share/hwdata/usb.ids -rm -f ${CD_BUILDCHROOT}/lib/evms/libe2fsim.1.2.1.so -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/install.txt ${CD_BUILDCHROOT}/ || die -echo usbcore >> ${CD_BUILDCHROOT}/etc/hotplug/blacklist -chmod +x ${CD_BUILDCHROOT}/usr/sbin/net-setup || die -mymotd=${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/motd -[ -e $mymotd ] && cp $mymotd ${CD_BUILDCHROOT}/etc -echo "CDBOOT=1" >> ${CD_BUILDCHROOT}/etc/rc.conf || die -echo "svcdir=/var/state/init.d" >> ${CD_BUILDCHROOT}/etc/conf.d/rc || die -echo "127.0.0.1 cdimage localhost" > ${CD_BUILDCHROOT}/etc/hosts || die -cp ${LIVECD_ROOT}/profiles/${CD_PROFILE}/aux-files/inittab ${CD_BUILDCHROOT}/etc || die -mount_all -cat > $CD_BUILDTEMP/chroot-clean << EOF -#!/bin/bash -source /etc/profile -#do our hid fix... -modules-update -cd /usr/src/linux -#produce correct module dependency information -make _modinst_post -rc-update del iptables default -rc-update del netmount default -rc-update add autoconfig default -#rc-update add md default -#remove standard keymap support: -rc-update del keymaps -rc-update del consolefont -rc-update add metalog default -rc-update add distccd default -rc-update add sshd default -adduser distcc -modules-update -#OK, we can't run env-update on the CD itself (likely no python) -#so we will tweak opengl stuff here... -rm /etc/env.d/09opengl -env-update -cp /etc/ld.so.conf /etc/ld.so.conf.orig -rm /usr/sbin/env-update -EOF -chmod +x $CD_BUILDTEMP/chroot-clean -chroot $CD_BUILDCHROOT /tmp/livecd/chroot-clean -[ $? -ne 0 ] && chroot_die "chroot-clean failure" -umount_all -rm -rf ${CD_BUILDCHROOT}/etc/localtime -cp ${CD_BUILDCHROOT}/usr/share/zoneinfo/GMT ${CD_BUILDCHROOT}/etc/localtime || die -find ${CD_BUILDCHROOT}/lib/modules -name modules.dep |xargs touch - diff --git a/src/livecd/profiles/x86/net-setup b/src/livecd/profiles/x86/net-setup deleted file mode 100644 index b74ed027be..0000000000 --- a/src/livecd/profiles/x86/net-setup +++ /dev/null @@ -1,32 +0,0 @@ -#!/bin/bash -[ "$1" = "" ] && echo "net-setup: please specify a network interface" && exit 1 -[ ! -d /tmp/setup.opts ] && mkdir /tmp/setup.opts -cd /tmp/setup.opts -dialog --title "Network Setup" --menu "Time to set up the $1 interface! You can use DHCP to automatically configure a network interface or you can specify an IP and related settings manually. Choose one option:" 20 60 7 0 "Use DHCP to auto-detect my network settings" 1 "Specify an IP address manually" 2> ${1}.1 -mynetsel=`cat ${1}.1` -case $mynetsel in -0) - /sbin/dhcpcd -t 10 ${1} - ;; -1) - dialog --title "IP address" --inputbox "Please enter an IP address for $1:" 20 50 "192.168.1.1" 2> ${1}.IP - dialog --title "Broadcast address" --inputbox "Please enter a Broadcast address for $1:" 20 50 "192.168.1.255" 2> ${1}.B - dialog --title "Network mask" --inputbox "Please enter a Network Mask for $1:" 20 50 "255.255.255.0" 2> ${1}.NM - dialog --title "Gateway" --inputbox "Please enter a Gateway for $1 (hit enter for none:)" 20 50 2> ${1}.GW - dialog --title "DNS server" --inputbox "Please enter a name server to use (hit enter for none:)" 20 50 2> ${1}.NS - /sbin/ifconfig $1 `cat ${1}.IP` broadcast `cat ${1}.B` netmask `cat ${1}.NM` - myroute=`cat ${1}.GW` - if [ "$myroute" != "" ] - then - /sbin/route add default gw $myroute dev $1 netmask 0.0.0.0 metric 1 - fi - myns="`cat ${1}.NS`" - if [ "$myns" = "" ] - then - : > /etc/resolv.conf - else - echo "nameserver $myns" > /etc/resolv.conf - fi - ;; -esac -echo "Type \"ifconfig\" to make sure the interface was configured correctly." diff --git a/src/livecd/profiles/x86/post-clean b/src/livecd/profiles/x86/post-clean deleted file mode 100644 index a9bf588e2f..0000000000 --- a/src/livecd/profiles/x86/post-clean +++ /dev/null @@ -1 +0,0 @@ -#!/bin/bash diff --git a/src/livecd/profiles/x86/settings b/src/livecd/profiles/x86/settings deleted file mode 100644 index ddd038de84..0000000000 --- a/src/livecd/profiles/x86/settings +++ /dev/null @@ -1,43 +0,0 @@ -CD_HOSTNAME="cdimage" -CD_PORTAGE_PROFILE="default-x86-1.4" -CD_PORTDIR="/usr/portage" -CD_ISONAME="gentoo.iso" -CD_DISTDIR="/usr/portage/distfiles" -CD_STAGELOC=/ -CD_TEMPROOT=/tmp -LOOP_MODE=cloop -CD_BUILDROOT=${CD_TEMPROOT}/${CD_PROFILE} -CD_PORTAGE_PROFILE="default-x86-1.4" -CD_USE="-cdr -wavelan pcmcia -gnome -dvd -gpm -lirc crypt ipv6 -doc -slang X -gtk -svga -directfb \ --ggi -esd -nas -ggi socks5 usb \ --python -truetype -prebuilt -cups -gtk2 -xv" -CD_CFLAGS="-O2 -mcpu=i686 -pipe" -CD_CXXFLAGS="${CD_CFLAGS}" -CD_STAGETARBALL=http://distro.ibiblio.org/pub/Linux/distributions/gentoo/experimental/x86/stages/stage3-x86-1.4_pre20030214.tar.bz2 -#modules to auto-detect/copy to the initrd (put in the "/modules/storage" directory) -#aic7xxx_old removed from position after aic7xxx in attempt to fix bugs #12185 and #11278 -STORAGE_MODULES="aic79xx aic7xxx aic7xxx_old BusLogic \ -ncr53c8xx NCR53c406a \ -initio advansys aha1740 aha1542 aha152x \ -atp870u dtc eata fdomain gdth \ -megaraid pas16 pci2220i pci2000 psi240i \ -qlogicfas qlogicfc qlogicisp \ -seagate t128 tmscsim u14-34f ultrastor wd7000 \ -a100u2w 3w-xxxx DAC960 NCR53c406a \ -aacraid sym53c8xx a100u2w cpqfc \ -dmx3191d dpt_i2o imm in2000 ips qla1280 \ -sim710 sym53c416" -FIREWIRE_MODULES="ieee1394 ohci1394 eth1394 sbp2" -ATARAID_MODULES="ataraid pdcraid hptraid silraid" -PCMCIA_MODULES="pcmcia_core i82365 ds ide-cs" -USB_MODULES="usbcore ehci-hcd uhci usb-ohci hid usb-storage" - -LOOP_SIZE="240000" -KERNCONFIG=kernel-config -CD_PORTDIR="/usr/portage" -CD_ISONAME="gentoo.iso" -MAINARCH=x86 -BOOTSPLASH=yes -DISTCC_HOSTS="192.168.0.1 192.168.0.2" -INITRD_SIZE="5000" -MAKEOPTS="-j5" |
