diff options
Diffstat (limited to 'src/livecd/profiles/kde/aux-files/xfree-nvidia')
| -rw-r--r-- | src/livecd/profiles/kde/aux-files/xfree-nvidia | 290 |
1 files changed, 0 insertions, 290 deletions
diff --git a/src/livecd/profiles/kde/aux-files/xfree-nvidia b/src/livecd/profiles/kde/aux-files/xfree-nvidia deleted file mode 100644 index 384c866ad7..0000000000 --- a/src/livecd/profiles/kde/aux-files/xfree-nvidia +++ /dev/null @@ -1,290 +0,0 @@ -########################################################################## -# Sample XF86Config file for NVIDIA XFree86 drivers. -# -# Refer to the XF86Config(4/5) man page for details about the format of -# this file. -# -# Be sure to replace the monitor values with correct values for your -# monitor! -########################################################################## - - -Section "Files" - - RgbPath "/usr/X11R6/lib/X11/rgb" - FontPath "unix/:-1" - -EndSection - - -########################################################################## -# Server flags section. -########################################################################## - -Section "ServerFlags" - - # Uncomment this to cause a core dump at the spot where a signal is - # received. This may leave the console in an unusable state, but may - # provide a better stack trace in the core dump to aid in debugging - #NoTrapSignals - - # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence - # This allows clients to receive this key event. - #DontZap - - # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching - # sequences. This allows clients to receive these key events. - #DontZoom - - # This allows the server to start up even if the - # mouse device can't be opened/initialised. - AllowMouseOpenFail - -EndSection - - -########################################################################## -# Input devices -########################################################################## - -# -# Keyboard section -# -Section "InputDevice" - - Identifier "Keyboard1" - Driver "Keyboard" - Option "AutoRepeat" "250 30" - - Option "XkbRules" "xfree86" - Option "XkbModel" "pc105" - Option "XkbLayout" "us" - -EndSection - - -# -# Pointer section -# -Section "InputDevice" - - Identifier "Mouse1" - Driver "mouse" - Option "Protocol" "IMPS/2" - Option "Device" "/dev/input/mice" - Option "Buttons" "7" - Option "ZAxisMapping" "4 5" -EndSection - - -########################################################################## -# Module section -########################################################################## - -Section "Module" - - Load "dbe" - - # Load the glx module. - Load "glx" - - Load "extmod" - - Load "type1" - Load "freetype" -EndSection - - -########################################################################## -# Monitor section -########################################################################## - -Section "Monitor" - - Identifier "MyMonitor" - VendorName "Mitsubisi" - ModelName "Diamond Plus 120u" - - # be sure to replace these values with values appropriate for your - # monitor! -# HorizSync 31-82 -# VertRefresh 55-120 - -EndSection - - -########################################################################## -# Graphics device section(s) -########################################################################## - -Section "Device" - Identifier "NV AGP" - VendorName "nvidia" - Driver "nvidia" - # update this with the PCI id of your card. Consult the output - # of the 'lspci' command. -# BusID "PCI:1:0:0" - Option "NoLogo" "1" -# Option "NoDDC" "1" -EndSection - -Section "Device" - Identifier "NV PCI" - VendorName "nvidia" - Driver "nvidia" - # update this with the PCI id of your card. Consult the output - # of the 'lspci' command. - BusID "PCI:0:13:0" -EndSection - -Section "Device" - Identifier "NV AGP TwinView" - VendorName "nvidia" - Driver "nvidia" - # update this with the PCI id of your card. Consult the output - # of the 'lspci' command. - BusID "PCI:1:0:0" - - # sample twinview setup - Option "TwinView" - # be sure to replace the HorizSync and VertRefresh with correct values - # for your monitor! - Option "SecondMonitorHorizSync" "31-82" - Option "SecondMonitorVertRefresh" "55-120" - Option "TwinViewOrientation" "RightOf" - Option "MetaModes" "1280x1024,1280x1024; 1024x768,1024x768" - Option "ConnectedMonitor" "crt,crt" -EndSection - - -########################################################################## -# Screen sections -########################################################################## - -# -# screen section for an nvidia AGP card -# -Section "Screen" - Identifier "Screen AGP" - Device "NV AGP" - Monitor "MyMonitor" - DefaultColorDepth 24 - DefaultFbBpp 32 - Subsection "Display" - Depth 8 - Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x400" - EndSubsection - Subsection "Display" - Depth 16 - Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - Subsection "Display" - Depth 24 - Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - -EndSection - - -# -# screen section for an nvidia PCI card -# -Section "Screen" - Identifier "Screen PCI" - Device "NV PCI" - Monitor "MyMonitor" - DefaultColorDepth 24 - Subsection "Display" - Depth 8 - Modes "1280x1024" "1024x768" "800x600" "640x400" - EndSubsection - Subsection "Display" - Depth 16 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - Subsection "Display" - Depth 24 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection -EndSection - -# -# screen section for an nvidia AGP TwinView card -# (look at the appropriate Device section) -# -Section "Screen" - Identifier "Screen AGP TwinView" - Device "NV AGP TwinView" - Monitor "MyMonitor" - DefaultColorDepth 24 - Subsection "Display" - Depth 8 - Modes "1280x1024" "1024x768" "800x600" "640x400" - EndSubsection - Subsection "Display" - Depth 16 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection - Subsection "Display" - Depth 24 - Modes "1280x1024" "1024x768" "800x600" "640x480" - EndSubsection -EndSection - - -########################################################################## -# ServerLayout sections -# (invoke using the '-layout' option of 'startx'. -########################################################################## - -# -# just one agp card -# -Section "ServerLayout" - Identifier "AGP" - Screen "Screen AGP" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# just one pci card -# -Section "ServerLayout" - Identifier "PCI" - Screen "Screen PCI" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# 2 cards, non twinview -# -Section "ServerLayout" - Identifier "Both" - Screen "Screen AGP" - Screen "Screen PCI" LeftOf "Screen AGP" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# just one agp twinview card -# -Section "ServerLayout" - Identifier "AGPTwinView" - Screen "Screen AGP TwinView" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection - -# -# 2 cards, one agp twinview and one pci (3 monitors total) -# -Section "ServerLayout" - Identifier "BothTwinView" - Screen "Screen AGP TwinView" - Screen "Screen PCI" LeftOf "Screen AGP TwinView" - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" -EndSection |